Hallo,
ich habe mal wieder ein Problem, für da ich keine Erklärung oder Lösung finden kann 😢 .
Ein BosTrend AC1200 WiFi Adapter Model No. AC1L funktionierte unter 20.04 sofort nach dem Einstecken. Es wurde kein Treiber oder sonst etwas verlangt funktionierte enifach auf Anhieb.
Unter 22.04 dagegen wird er nicht zum Leben erweckt bzw. nicht erkannt.
lsusb liefert auf beiden Systemen das absolut gleiche Ergebnis
alex@ago:~$ lsusb Bus 002 Device 009: ID 056d:0002 EIZO Corp. HID Monitor Controls Bus 002 Device 008: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller Bus 002 Device 007: ID 0409:005a NEC Corp. HighSpeed Hub Bus 002 Device 006: ID 28bd:0938 XP-Pen UGEE S1060W Bus 002 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub alex@ago:~$
Die Pos. 'Bus 002 Device 004' ist dabei der WiFi Adapter. Also kann es daran wohl nicht liegen.
Hat jemand eine Idee woran das liegen könnte?
Gruß, Alex