Hallo Lidux,
das Notebook ist ein Lenovo Y560
wie schon gesagt ich hab nicht gefunden aber ich poste es trotzdem
lspci:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
01:00.0 VGA compatible controller: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series]
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20)
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20)
03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20)
03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20)
05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
hier lsusb
Bus 002 Device 003: ID 064e:f207 Suyin Corp.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0c0b:b136 Dura Micro, Inc. (Acomdata)
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod:
Module Size Used by
usb_storage 53538 1
uas 17996 0
joydev 17606 0
binfmt_misc 17565 1
nfsd 316512 11
lockd 85732 1 nfsd
nfs_acl 12883 1 nfsd
auth_rpcgss 52881 1 nfsd
sunrpc 234297 12 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 12998 1 nfsd
vesafb 13761 1
vmnet 55734 13
ppdev 17113 0
parport_pc 36959 0
vmblock 18923 1
arc4 12529 2
vsock 47659 0
vmci 64490 1 vsock
vmmon 89333 0
snd_hda_codec_hdmi 28103 1
snd_hda_codec_realtek 336693 1
snd_hda_intel 33211 4
snd_hda_codec 103804 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13604 1 snd_hda_codec
snd_seq_midi 13324 0
snd_rawmidi 30486 1 snd_seq_midi
snd_pcm 96625 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi_event 14899 1 snd_seq_midi
ath9k 118238 0
snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29602 2 snd_pcm,snd_seq
mac80211 294370 1 ath9k
uvcvideo 72195 0
i7core_edac 27903 0
snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq
videodev 82052 1 uvcvideo
v4l2_compat_ioctl32 17078 1 videodev
ath9k_common 13851 1 ath9k
snd 67382 17 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
fglrx 2739144 171
jmb38x_ms 17596 0
ath9k_hw 323077 2 ath9k,ath9k_common
ath 23773 2 ath9k,ath9k_hw
cfg80211 178528 3 ath9k,mac80211,ath
psmouse 73535 0
edac_core 53845 3 i7core_edac
intel_ips 18097 0
soundcore 12680 1 snd
serio_raw 13166 0
memstick 16520 1 jmb38x_ms
lp 17825 0
parport 46458 3 ppdev,parport_pc,lp
ideapad_laptop 13494 0
mantis 23328 0
mantis_core 40423 1 mantis
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
sparse_keymap 13898 1 ideapad_laptop
video 19438 0
ir_lirc_codec 12898 0
lirc_dev 19232 1 ir_lirc_codec
ir_sony_decoder 12549 0
dvb_core 110487 1 mantis_core
ir_jvc_decoder 12546 0
ir_rc6_decoder 12546 0
ir_rc5_decoder 12546 0
ir_nec_decoder 12546 0
rc_core 26918 7 ir_lirc_codec,mantis_core,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder
ahci 25951 2
libahci 26642 1 ahci
tg3 141750 0
sdhci_pci 13989 0
sdhci 27387 1 sdhci_pci
und zu guter letzt dmesg
[ 2.321760] pnp: PnP ACPI: found 12 devices
[ 2.321763] ACPI: ACPI bus type pnp unregistered
[ 2.328282] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 2.328288] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0300000-0xc04fffff]
[ 2.328293] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[ 2.328298] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
[ 2.328302] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 2.328306] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 2.328310] pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
[ 2.328314] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8440000-0xf845ffff pref]
[ 2.328318] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 2.328321] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 2.328326] pci 0000:00:03.0: bridge window [mem 0xf8400000-0xf84fffff]
[ 2.328330] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 2.328337] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
[ 2.328340] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 2.328348] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 2.328357] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 2.328367] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 2.328378] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 2.328386] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 2.328396] pci 0000:00:1c.1: bridge window [mem 0xf8500000-0xf85fffff]
[ 2.328405] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 2.328416] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 2.328424] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 2.328434] pci 0000:00:1c.2: bridge window [mem 0xc0300000-0xc04fffff]
[ 2.328443] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[ 2.328454] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 2.328462] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 2.328472] pci 0000:00:1c.3: bridge window [mem 0xf8200000-0xf83fffff]
[ 2.328481] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 2.328493] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
[ 2.328501] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
[ 2.328511] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf86fffff]
[ 2.328520] pci 0000:00:1c.4: bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
[ 2.328531] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 2.328533] pci 0000:00:1e.0: bridge window [io disabled]
[ 2.328543] pci 0000:00:1e.0: bridge window [mem disabled]
[ 2.328552] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.328575] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.328579] pci 0000:00:03.0: setting latency timer to 64
[ 2.328595] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.328604] pci 0000:00:1c.0: setting latency timer to 64
[ 2.328624] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.328629] pci 0000:00:1c.1: setting latency timer to 64
[ 2.328648] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.328653] pci 0000:00:1c.2: setting latency timer to 64
[ 2.328673] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.328678] pci 0000:00:1c.3: setting latency timer to 64
[ 2.328693] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.328703] pci 0000:00:1c.4: setting latency timer to 64
[ 2.328718] pci 0000:00:1e.0: setting latency timer to 64
[ 2.328727] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.328730] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.328733] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.328736] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 2.328738] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 2.328741] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 2.328744] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[ 2.328746] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 2.328749] pci_bus 0000:01: resource 1 [mem 0xf8400000-0xf84fffff]
[ 2.328752] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 2.328755] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 2.328757] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf81fffff]
[ 2.328760] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 2.328763] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 2.328765] pci_bus 0000:05: resource 1 [mem 0xf8500000-0xf85fffff]
[ 2.328768] pci_bus 0000:05: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 2.328771] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
[ 2.328773] pci_bus 0000:06: resource 1 [mem 0xc0300000-0xc04fffff]
[ 2.328776] pci_bus 0000:06: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[ 2.328779] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 2.328782] pci_bus 0000:07: resource 1 [mem 0xf8200000-0xf83fffff]
[ 2.328784] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 2.328787] pci_bus 0000:09: resource 0 [io 0x7000-0x7fff]
[ 2.328790] pci_bus 0000:09: resource 1 [mem 0xf8600000-0xf86fffff]
[ 2.328793] pci_bus 0000:09: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
[ 2.328796] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 2.328798] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 2.328801] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.328803] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 2.328806] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 2.328809] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[ 2.328811] pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xfeafffff]
[ 2.328846] NET: Registered protocol family 2
[ 2.329013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.330163] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.333715] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.334144] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.334147] TCP reno registered
[ 2.334157] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.334207] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.334334] NET: Registered protocol family 1
[ 2.334530] pci 0000:01:00.0: Boot video device
[ 2.334629] PCI: CLS 64 bytes, default 64
[ 2.334631] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.334634] Placing 64MB software IO TLB between ffff8800b767a000 - ffff8800bb67a000
[ 2.334637] software IO TLB at phys 0xb767a000 - 0xbb67a000
[ 2.334675] Simple Boot Flag at 0x36 set to 0x1
[ 2.335423] audit: initializing netlink socket (disabled)
[ 2.335432] type=2000 audit(1304340372.140:1): initialized
[ 2.352261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.354412] VFS: Disk quotas dquot_6.5.2
[ 2.354481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.355224] fuse init (API version 7.16)
[ 2.355325] msgmni has been set to 7787
[ 2.355636] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.355674] io scheduler noop registered
[ 2.355676] io scheduler deadline registered
[ 2.355723] io scheduler cfq registered (default)
[ 2.356141] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.356164] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.356215] intel_idle: MWAIT substates: 0x1120
[ 2.356233] intel_idle: v0.4 model 0x1E
[ 2.356234] intel_idle: lapic_timer_reliable_states 0x2
[ 2.357424] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.358044] ACPI: AC Adapter [ACAD] (on-line)
[ 2.358157] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 2.539198] ACPI: Lid Switch [LID]
[ 2.539277] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.539281] ACPI: Power Button [PWRB]
[ 2.539329] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.539333] ACPI: Sleep Button [SLPB]
[ 2.539383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.539387] ACPI: Power Button [PWRF]
[ 2.539852] ACPI: acpi_idle yielding to intel_idle
[ 2.544734] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.544737] ACPI: Thermal Zone [TZ00] (39 C)
[ 2.544767] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.544820] ERST: Table is not found!
[ 2.544874] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.768778] ACPI: Battery Slot [BAT1] (battery present)
[ 2.782391] Linux agpgart interface v0.103
[ 2.783673] brd: module loaded
[ 2.784253] loop: module loaded
[ 2.784341] i2c-core: driver [adp5520] using legacy suspend method
[ 2.784343] i2c-core: driver [adp5520] using legacy resume method
[ 2.784758] Fixed MDIO Bus: probed
[ 2.784787] PPP generic driver version 2.4.2
[ 2.784830] tun: Universal TUN/TAP device driver, 1.6
[ 2.784832] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.784915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.784942] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.784975] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.784983] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.785026] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.785117] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.789073] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.789099] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf8906000
[ 2.809377] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.809523] hub 1-0:1.0: USB hub found
[ 2.809528] hub 1-0:1.0: 3 ports detected
[ 2.809634] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.809653] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.809661] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.809709] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.809798] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.813788] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.813808] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf8906400
[ 2.829403] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.829532] hub 2-0:1.0: USB hub found
[ 2.829536] hub 2-0:1.0: 3 ports detected
[ 2.829627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.829642] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.829749] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2P] at 0x60,0x64 irq 1,12
[ 2.835889] i8042: Detected active multiplexing controller, rev 1.1
[ 2.838998] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.839005] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.839035] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.839062] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.839087] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.839202] mousedev: PS/2 mouse device common for all mice
[ 2.839419] rtc_cmos 00:07: RTC can wake from S4
[ 2.849478] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.849515] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.849630] device-mapper: uevent: version 1.0.3
[ 2.849716] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.849811] device-mapper: multipath: version 1.2.0 loaded
[ 2.849814] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.850163] cpuidle: using governor ladder
[ 2.850508] cpuidle: using governor menu
[ 2.850783] TCP cubic registered
[ 2.850920] NET: Registered protocol family 10
[ 2.851476] NET: Registered protocol family 17
[ 2.851491] Registering the dns_resolver key type
[ 2.854904] PM: Hibernation image not present or could not be loaded.
[ 2.854911] registered taskstats version 1
[ 2.855387] Magic number: 11:649:783
[ 2.855617] rtc_cmos 00:07: setting system clock to 2011-05-02 12:46:13 UTC (1304340373)
[ 2.855620] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.855622] EDD information not available.
[ 2.857436] Freeing unused kernel memory: 956k freed
[ 2.857562] Write protecting the kernel read-only data: 10240k
[ 2.858742] Freeing unused kernel memory: 184k freed
[ 2.863356] Freeing unused kernel memory: 1444k freed
[ 2.879951] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.886159] <30>udev[88]: starting version 167
[ 3.024318] sdhci: Secure Digital Host Controller Interface driver
[ 3.024322] sdhci: Copyright(c) Pierre Ossman
[ 3.029718] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2386] (rev 20)
[ 3.029750] sdhci-pci 0000:03:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.029796] sdhci-pci 0000:03:00.2: setting latency timer to 64
[ 3.029811] mmc0: no vmmc regulator found
[ 3.029859] Registered led device: mmc0::
[ 3.029915] mmc0: SDHCI controller on PCI [0000:03:00.2] using DMA
[ 3.036766] tg3.c:v3.116 (December 3, 2010)
[ 3.036816] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.036828] tg3 0000:09:00.0: setting latency timer to 64
[ 3.046148] ahci 0000:00:1f.2: version 3.0
[ 3.046168] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.046232] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 3.046265] ahci: SSS flag set, parallel bus scan disabled
[ 3.046309] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 3.046313] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 3.046322] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.129952] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.130705] scsi0 : ahci
[ 3.131076] scsi1 : ahci
[ 3.131422] scsi2 : ahci
[ 3.131765] scsi3 : ahci
[ 3.132137] scsi4 : ahci
[ 3.132430] scsi5 : ahci
[ 3.132607] ata1: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905100 irq 45
[ 3.132614] ata2: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905180 irq 45
[ 3.132616] ata3: DUMMY
[ 3.132617] ata4: DUMMY
[ 3.132623] ata5: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905300 irq 45
[ 3.132626] ata6: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905380 irq 45
[ 3.152069] tg3 mdio bus: probed
[ 3.176090] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:a6:50:e0
[ 3.176093] tg3 0000:09:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=900:01)
[ 3.176095] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.176097] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.281044] hub 1-1:1.0: USB hub found
[ 3.281274] hub 1-1:1.0: 6 ports detected
[ 3.329943] Refined TSC clocksource calibration: 1595.999 MHz.
[ 3.329951] Switching to clocksource tsc
[ 3.400071] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.480135] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.551175] hub 2-1:1.0: USB hub found
[ 3.551216] hub 2-1:1.0: 8 ports detected
[ 3.830349] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.830382] usb 2-1.4: new high speed USB device using ehci_hcd and address 3
[ 3.830699] ata2.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 3.830707] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.831124] ata2.00: configured for UDMA/133
[ 3.831379] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 3.831501] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.831577] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.831813] sd 1:0:0:0: [sda] Write Protect is off
[ 3.831822] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.831898] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.832853] sda: sda1 sda2 < sda5 >
[ 3.833390] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.580670] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.582591] ata5.00: ATAPI: Optiarc DVD RW AD-7700H, A816, max UDMA/100
[ 4.589559] ata5.00: configured for UDMA/100
[ 4.617036] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7700H A816 PQ: 0 ANSI: 5
[ 4.633986] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.633993] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.634138] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.634226] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.980916] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.017799] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.205416] Adding 3227644k swap on /dev/sda5. Priority:-1 extents:1 across:3227644k SS
[ 5.223911] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
[ 5.275090] <30>udev[382]: starting version 167
[ 5.299081] IR NEC protocol handler initialized
[ 5.312004] IR RC5(x) protocol handler initialized
[ 5.317373] IR RC6 protocol handler initialized
[ 5.322456] IR JVC protocol handler initialized
[ 5.331932] IR Sony protocol handler initialized
[ 5.340155] lirc_dev: IR Remote Control driver registered, major 251
[ 5.340410] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.340416] Disabling lock debugging due to kernel taint
[ 5.343401] IR LIRC bridge handler initialized
[ 5.357063] acpi device:03: registered as cooling_device8
[ 5.357241] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[ 5.357330] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.388613] type=1400 audit(1304340376.021:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=588 comm="apparmor_parser"
[ 5.390221] type=1400 audit(1304340376.021:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=588 comm="apparmor_parser"
[ 5.391034] lp: driver loaded but no devices found
[ 5.391204] type=1400 audit(1304340376.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=588 comm="apparmor_parser"
[ 5.392536] intel ips 0000:00:1f.6: Non-IPS CPU detected.
[ 5.392541] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 5.432288] cfg80211: Calling CRDA to update world regulatory domain
[ 5.455117] jmb38x_ms 0000:03:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.455128] jmb38x_ms 0000:03:00.3: setting latency timer to 64
[ 5.461319] EDAC MC: Ver: 2.1.0 Apr 11 2011
[ 5.481374] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
[ 5.499777] Linux video capture interface: v2.00
[ 5.515490] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
[ 5.515517] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[ 5.515521] EDAC i7core: Driver loaded.
[ 5.535174] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (064e:f207)
[ 5.545609] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input7
[ 5.545711] usbcore: registered new interface driver uvcvideo
[ 5.545715] USB Video Class driver (v1.0.0)
[ 5.563625] [fglrx] Maximum main memory to use for locked dma buffers: 3735 MBytes.
[ 5.564230] [fglrx] vendor: 1002 device: 68c0 count: 1
[ 5.565307] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[ 5.565324] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.565331] pci 0000:01:00.0: setting latency timer to 64
[ 5.565866] [fglrx] Kernel PAT support is enabled
[ 5.565894] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
[ 5.580588] ath9k 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.580600] ath9k 0000:05:00.0: setting latency timer to 64
[ 5.594385] cfg80211: World regulatory domain updated:
[ 5.594390] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.594395] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.594399] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.594404] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.594408] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.594412] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.652109] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.652172] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.652195] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.758136] type=1400 audit(1304340376.391:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=848 comm="apparmor_parser"
[ 5.758772] type=1400 audit(1304340376.391:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=849 comm="apparmor_parser"
[ 5.758870] type=1400 audit(1304340376.391:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=855 comm="apparmor_parser"
[ 5.760951] type=1400 audit(1304340376.391:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=849 comm="apparmor_parser"
[ 5.761525] type=1400 audit(1304340376.401:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=849 comm="apparmor_parser"
[ 5.763931] type=1400 audit(1304340376.401:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=854 comm="apparmor_parser"
[ 5.794349] tg3 0000:09:00.0: irq 47 for MSI/MSI-X
[ 5.801427] hda_codec: ALC272: BIOS auto-probing.
[ 5.809631] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.809745] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.809977] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.810099] HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 5.810131] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 5.813005] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.983426] /dev/vmmon[977]: Module vmmon: registered with major=10 minor=165
[ 5.983474] /dev/vmmon[977]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
[ 5.983485] /dev/vmmon[977]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
[ 5.983490] /dev/vmmon[977]: Module vmmon: initialized
[ 5.993995] /dev/vmci[992]: VMCI: Driver initialized.
[ 5.994105] /dev/vmci[992]: Module vmci: registered with major=10 minor=56
[ 5.994110] /dev/vmci[992]: Module vmci: initialized
[ 6.017087] ath: EEPROM regdomain: 0x6a
[ 6.017090] ath: EEPROM indicates we should expect a direct regpair map
[ 6.017093] ath: Country alpha2 being used: 00
[ 6.017094] ath: Regpair used: 0x6a
[ 6.017097] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017099] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017101] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017103] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017105] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017107] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017109] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017111] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017113] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017115] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017117] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017119] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017121] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017123] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017125] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017127] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017129] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017131] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017133] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017135] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017137] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017139] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017141] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017143] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017145] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 6.017147] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 6.017149] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 6.020035] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 6.050740] ppdev: user-space parallel port driver
[ 6.072541] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.073545] Registered led device: ath9k-phy0::radio
[ 6.073580] Registered led device: ath9k-phy0::assoc
[ 6.073612] Registered led device: ath9k-phy0::tx
[ 6.073646] Registered led device: ath9k-phy0::rx
[ 6.073657] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90011180000, irq=17
[ 6.117390] /dev/vmnet: open called by PID 1067 (vmnet-bridge)
[ 6.117401] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6.117440] /dev/vmnet: port on hub 0 successfully opened
[ 6.117502] bridge-wlan0: device is wireless, enabling SMAC
[ 6.117508] bridge-wlan0: up
[ 6.117756] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.117778] bridge-wlan0: attached
[ 6.122734] bridge-wlan0: disabling the bridge
[ 6.162884] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90012400000, using 3072k, total 3072k
[ 6.162888] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 6.162890] vesafb: scrolling: redraw
[ 6.162893] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 6.163048] Console: switching to colour frame buffer device 128x48
[ 6.163072] fb0: VESA VGA frame buffer device
[ 6.171904] bridge-wlan0: down
[ 6.171911] bridge-wlan0: detached
[ 6.172554] tg3 0000:09:00.0: eth0: Link is down
[ 6.505361] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[ 6.506047] [fglrx] Firegl kernel thread PID: 1198
[ 6.506407] [fglrx] Firegl kernel thread PID: 1199
[ 6.506754] [fglrx] Firegl kernel thread PID: 1200
[ 6.507091] [fglrx] IRQ 49 Enabled
[ 6.580329] /dev/vmnet: open called by PID 1201 (vmnet-dhcpd)
[ 6.580339] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 6.580365] /dev/vmnet: port on hub 1 successfully opened
[ 6.582084] /dev/vmnet: open called by PID 1203 (vmnet-netifup)
[ 6.582091] /dev/vmnet: port on hub 1 successfully opened
[ 6.588735] /dev/vmnet: open called by PID 1206 (vmnet-dhcpd)
[ 6.588746] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 6.588782] /dev/vmnet: port on hub 8 successfully opened
[ 6.592210] /dev/vmnet: open called by PID 1212 (vmnet-natd)
[ 6.592220] /dev/vmnet: port on hub 8 successfully opened
[ 6.594982] /dev/vmnet: open called by PID 1213 (vmnet-netifup)
[ 6.594992] /dev/vmnet: port on hub 8 successfully opened
[ 6.595165] [fglrx] Gart USWC size:1220 M.
[ 6.595168] [fglrx] Gart cacheable size:483 M.
[ 6.595174] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 6.595177] [fglrx] Reserved FB block: Unshared offset:f92f000, size:3d1000
[ 6.595179] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 6.652882] RPC: Registered udp transport module.
[ 6.652887] RPC: Registered tcp transport module.
[ 6.652890] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.683863] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.697422] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input10
[ 6.722744] svc: failed to register lockdv1 RPC service (errno 97).
[ 6.722814] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 6.723115] NFSD: starting 90-second grace period
[ 6.772962] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 7.031452] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 7.227443] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 7.532413] CE: hpet increased min_delta_ns to 20113 nsec
[ 7.552711] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0400
[ 7.603861] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 9.355274] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 10.741537] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 17.168325] vmnet8: no IPv6 routers present
[ 17.178331] vmnet1: no IPv6 routers present
[ 41.224171] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 41.224174] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 41.224439] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.224654] /dev/vmnet: open called by PID 1067 (vmnet-bridge)
[ 41.224673] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 41.224700] /dev/vmnet: port on hub 0 successfully opened
[ 41.224708] bridge-eth0: up
[ 41.224710] bridge-eth0: attached
[ 51.559735] eth0: no IPv6 routers present
[ 57.656273] CE: hpet3 increased min_delta_ns to 7500 nsec
[ 57.656347] CE: hpet3 increased min_delta_ns to 11250 nsec
[ 57.656368] hrtimer: interrupt took 7542 ns
[ 104.218260] CE: hpet6 increased min_delta_ns to 7500 nsec
[ 104.218277] CE: hpet6 increased min_delta_ns to 11250 nsec
[ 109.484114] CE: hpet2 increased min_delta_ns to 7500 nsec
[ 109.484124] CE: hpet2 increased min_delta_ns to 11250 nsec
[ 120.356309] CE: hpet5 increased min_delta_ns to 7500 nsec
[ 120.356331] CE: hpet5 increased min_delta_ns to 11250 nsec
[ 133.941403] CE: hpet4 increased min_delta_ns to 7500 nsec
[ 133.941413] CE: hpet4 increased min_delta_ns to 11250 nsec
[ 311.139506] CE: hpet increased min_delta_ns to 30169 nsec
[ 910.185758] tg3 0000:09:00.0: eth0: Link is down
[ 910.195880] bridge-eth0: disabling the bridge
[ 910.354839] bridge-eth0: down
[ 910.354848] bridge-eth0: detached
[ 3487.022608] usb 1-1.2: new high speed USB device using ehci_hcd and address 3
[ 3487.149788] usbcore: registered new interface driver uas
[ 3487.163767] Initializing USB Mass Storage driver...
[ 3487.164105] scsi6 : usb-storage 1-1.2:1.0
[ 3487.164379] usbcore: registered new interface driver usb-storage
[ 3487.164386] USB Mass Storage support registered.
[ 3488.165082] scsi 6:0:0:0: Direct-Access TrekStor WD5000AAJB-00UHA 1.05 PQ: 0 ANSI: 0
[ 3488.167078] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3488.168055] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3488.170413] sd 6:0:0:0: [sdb] Write Protect is off
[ 3488.170424] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3488.172235] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3488.172242] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3488.176115] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3488.176123] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3488.186519] sdb: sdb1
[ 3488.190457] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3488.190467] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3488.190476] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 3540.690839] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3540.690847] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3540.706382] sdb:
[ 3582.294868] usb 1-1.2: USB disconnect, address 3
[ 3591.967247] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[ 3592.080989] scsi7 : usb-storage 1-1.2:1.0
[ 3593.079589] scsi 7:0:0:0: Direct-Access TrekStor WD5000AAJB-00UHA 1.05 PQ: 0 ANSI: 0
[ 3593.081892] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 3593.082747] sd 7:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3593.084199] sd 7:0:0:0: [sdb] Write Protect is off
[ 3593.084209] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3593.085916] sd 7:0:0:0: [sdb] No Caching mode page present
[ 3593.085925] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3593.089604] sd 7:0:0:0: [sdb] No Caching mode page present
[ 3593.089611] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3593.099804] sdb:
[ 3593.103747] sd 7:0:0:0: [sdb] No Caching mode page present
[ 3593.103754] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3593.103761] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 3698.974095] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 3698.974103] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 3698.975089] /dev/vmnet: open called by PID 1067 (vmnet-bridge)
[ 3698.975109] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 3698.975172] /dev/vmnet: port on hub 0 successfully opened
[ 3698.975197] bridge-eth0: up
[ 3698.975204] bridge-eth0: attached
[ 3715.663375] exe (5100): /proc/5100/oom_adj is deprecated, please use /proc/5100/oom_score_adj instead.
Hardwareschalter ist natürlich nicht betätigt wenn ich das tue sagt er mich auch derzeit kein Modul vorhanden.
Danke für deine Hilfe