Hallo zusammen,
auf einem alten Laptop (DELL LATITUDE E6500) habe ich Lubuntu installiert. System läuft "größtenteils" stabil, bis auf einige Stellen.
z.B. wenn ich im Thunderbird auf das Adressbuch klicke. (reproduzierbar) dann friert erst Thunderbird ein und wenige Sekunden später das ganze System. auch ab und zu beim öffnen von Firefox, friert er ein. (sporadisch)
bisher habe ich keine Ursache ausmachen können.
inxi -Frz
System: Kernel: 5.13.0-28-generic x86_64 bits: 64 Desktop: LXQt 0.14.1 Distro: Ubuntu 20.04.3 LTS (Focal Fossa) Machine: Type: Portable System: Dell product: Latitude E6500 v: N/A serial: <filter> Mobo: Dell model: 0PP476 serial: <filter> BIOS: Dell v: A29 date: 06/04/2013 CPU: Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP L2 cache: 3072 KiB Speed: 798 MHz min/max: 800/2268 MHz Core speeds (MHz): 1: 798 2: 798 Graphics: Device-1: NVIDIA G98M [Quadro NVS 160M] driver: nouveau v: kernel Display: x11 server: X.Org 1.20.13 driver: modesetting unloaded: fbdev,vesa resolution: 1024x768~60Hz OpenGL: renderer: NV98 v: 3.3 Mesa 21.0.3 Audio: Device-1: Intel 82801I HD Audio driver: snd_hda_intel Sound Server: ALSA v: k5.13.0-28-generic Network: Device-1: Intel 82567LM Gigabit Network driver: e1000e IF: enp0s25 state: down mac: <filter> Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi IF: wlp12s0 state: up mac: <filter> Device-3: Dell Wireless 370 Bluetooth Mini-card type: USB driver: btusb Drives: Local Storage: total: 119.24 GiB used: 14.87 GiB (12.5%) ID-1: /dev/sda vendor: Samsung model: MZ7PD128HCFV-000H1 size: 119.24 GiB Partition: ID-1: / size: 61.67 GiB used: 14.87 GiB (24.1%) fs: ext4 dev: /dev/sda3 Sensors: System Temperatures: cpu: 44.0 C mobo: N/A sodimm: 37.0 C gpu: nouveau temp: 44 C Fan Speeds (RPM): cpu: 0 Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://de.archive.ubuntu.com/ubuntu/ focal main restricted 2: deb-src http://de.archive.ubuntu.com/ubuntu/ focal multiverse restricted main universe 3: deb http://de.archive.ubuntu.com/ubuntu/ focal-updates main restricted 4: deb-src http://de.archive.ubuntu.com/ubuntu/ focal-updates multiverse restricted main universe 5: deb http://de.archive.ubuntu.com/ubuntu/ focal universe 6: deb http://de.archive.ubuntu.com/ubuntu/ focal-updates universe 7: deb http://de.archive.ubuntu.com/ubuntu/ focal multiverse 8: deb http://de.archive.ubuntu.com/ubuntu/ focal-updates multiverse 9: deb http://de.archive.ubuntu.com/ubuntu/ focal-security main restricted 10: deb-src http://de.archive.ubuntu.com/ubuntu/ focal-security multiverse restricted main universe 11: deb http://de.archive.ubuntu.com/ubuntu/ focal-security universe 12: deb http://de.archive.ubuntu.com/ubuntu/ focal-security multiverse 13: deb http://de.archive.ubuntu.com/ubuntu/ focal-backports main restricted universe multiverse 14: deb-src http://de.archive.ubuntu.com/ubuntu/ focal-backports main restricted universe multiverse 15: deb http://archive.canonical.com/ubuntu focal partner 16: deb-src http://archive.canonical.com/ubuntu focal partner Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main Active apt repos in: /etc/apt/sources.list.d/marko-preuss-ubuntu-hibiscus-focal.list 1: deb http://ppa.launchpad.net/marko-preuss/hibiscus/ubuntu focal main 2: deb-src http://ppa.launchpad.net/marko-preuss/hibiscus/ubuntu focal main No active apt repos in: /etc/apt/sources.list.d/poliva-ubuntu-pof-focal.list Active apt repos in: /etc/apt/sources.list.d/rock-core-ubuntu-qt4-focal.list 1: deb http://ppa.launchpad.net/rock-core/qt4/ubuntu focal main Info: Processes: 204 Uptime: 5m Memory: 3.82 GiB used: 1.24 GiB (32.5%) Shell: bash inxi: 3.0.38
sudo smartctl -t short /dev/sda && sleep 3m && sudo smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-28-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sat Jun 18 10:36:01 2022 CEST Use smartctl -X to abort test. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-28-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG MZ7PD128HCFV-000H1 Serial Number: S1MBNSAG506560 LU WWN Device Id: 5 002538 500000000 Firmware Version: DXM01H0Q User Capacity: 128.035.676.160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jun 18 10:37:02 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 9) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 002 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 13324 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1714 170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 2288 171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 173 Unknown_Attribute 0x0013 087 087 005 Pre-fail Always - 448 174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 692 183 Runtime_Bad_Block 0x0032 099 099 001 Old_age Always - 482 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 068 052 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0002 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13324 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
dmesg
[ 0.290682] ACPI: bus type PCI registered [ 0.290682] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.290682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.290682] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.290682] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.290682] PCI: Using configuration type 1 for base access [ 0.295131] Kprobes globally optimized [ 0.295140] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.295140] ACPI: Added _OSI(Module Device) [ 0.295140] ACPI: Added _OSI(Processor Device) [ 0.295140] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.295140] ACPI: Added _OSI(Processor Aggregator Device) [ 0.295140] ACPI: Added _OSI(Linux-Dell-Video) [ 0.295140] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.295140] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.305578] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.309941] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.314921] ACPI: Dynamic OEM Table Load: [ 0.314930] ACPI: SSDT 0xFFFF8DF780BEBC00 000281 (v01 PmRef BspIst 00003000 INTL 20050624) [ 0.315765] ACPI: Dynamic OEM Table Load: [ 0.315774] ACPI: SSDT 0xFFFF8DF780AB2000 0005C6 (v01 PmRef BspCst 00003001 INTL 20050624) [ 0.316950] ACPI: Dynamic OEM Table Load: [ 0.316957] ACPI: SSDT 0xFFFF8DF780AA3600 0001D7 (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.317612] ACPI: Dynamic OEM Table Load: [ 0.317619] ACPI: SSDT 0xFFFF8DF780BB86C0 00008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.318546] ACPI: EC: EC started [ 0.318548] ACPI: EC: interrupt blocked [ 0.319571] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.319576] ACPI: \_SB_.PCI0.ISAB.ECDV: Boot DSDT EC used to handle transactions [ 0.319579] ACPI: Interpreter enabled [ 0.319604] ACPI: (supports S0 S3 S4 S5) [ 0.319607] ACPI: Using IOAPIC for interrupt routing [ 0.319645] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.319991] ACPI: Enabled 12 GPEs in block 00 to 3F [ 0.511194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.511206] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.511223] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.530712] PCI host bridge to bus 0000:00 [ 0.530717] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.530721] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.530723] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.530726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.530729] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.530731] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.530734] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window] [ 0.530737] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window] [ 0.530739] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window] [ 0.530741] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.530744] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window] [ 0.530746] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window] [ 0.530749] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window] [ 0.530751] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window] [ 0.530769] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.530797] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.530800] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.530934] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 [ 0.530987] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.531201] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 [ 0.531223] pci 0000:00:19.0: reg 0x10: [mem 0xf6fe0000-0xf6ffffff] [ 0.531236] pci 0000:00:19.0: reg 0x14: [mem 0xf6fdb000-0xf6fdbfff] [ 0.531248] pci 0000:00:19.0: reg 0x18: [io 0xefe0-0xefff] [ 0.531337] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.531477] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.531536] pci 0000:00:1a.0: reg 0x20: [io 0x6f60-0x6f7f] [ 0.531754] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.531813] pci 0000:00:1a.1: reg 0x20: [io 0x6f80-0x6f9f] [ 0.532028] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.532087] pci 0000:00:1a.2: reg 0x20: [io 0x6fa0-0x6fbf] [ 0.532313] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.532335] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff] [ 0.532443] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.532627] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.532655] pci 0000:00:1b.0: reg 0x10: [mem 0xf6fdc000-0xf6fdffff 64bit] [ 0.532771] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.532965] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.533092] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.533293] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.533418] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.533622] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.533747] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.533949] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.534075] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.534275] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.534334] pci 0000:00:1d.0: reg 0x20: [io 0x6f00-0x6f1f] [ 0.534550] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.534609] pci 0000:00:1d.1: reg 0x20: [io 0x6f20-0x6f3f] [ 0.534823] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.534882] pci 0000:00:1d.2: reg 0x20: [io 0x6f40-0x6f5f] [ 0.535111] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.535132] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff] [ 0.535241] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.535431] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.535680] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.535989] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.536011] pci 0000:00:1f.2: reg 0x10: [io 0x6e70-0x6e77] [ 0.536023] pci 0000:00:1f.2: reg 0x14: [io 0x6e78-0x6e7b] [ 0.536036] pci 0000:00:1f.2: reg 0x18: [io 0x6e80-0x6e87] [ 0.536048] pci 0000:00:1f.2: reg 0x1c: [io 0x6e88-0x6e8b] [ 0.536059] pci 0000:00:1f.2: reg 0x20: [io 0x6ea0-0x6ebf] [ 0.536072] pci 0000:00:1f.2: reg 0x24: [mem 0xfed1c800-0xfed1cfff] [ 0.536138] pci 0000:00:1f.2: PME# supported from D3hot [ 0.536307] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.536334] pci 0000:00:1f.3: reg 0x10: [mem 0xf6fdaf00-0xf6fdafff 64bit] [ 0.536365] pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f] [ 0.536592] pci 0000:01:00.0: [10de:06eb] type 00 class 0x030000 [ 0.536621] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff] [ 0.536638] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.536655] pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit] [ 0.536667] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f] [ 0.536679] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.536691] pci 0000:01:00.0: enabling Extended Tags [ 0.536823] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5.0 GT/s PCIe x16 link) [ 0.536957] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.536962] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.536965] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff] [ 0.536970] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.537046] pci 0000:00:1c.0: PCI bridge to [bus 0b] [ 0.537170] pci 0000:0c:00.0: [8086:4235] type 00 class 0x028000 [ 0.537221] pci 0000:0c:00.0: reg 0x10: [mem 0xf1ffe000-0xf1ffffff 64bit] [ 0.537444] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.537640] pci 0000:00:1c.1: PCI bridge to [bus 0c] [ 0.537649] pci 0000:00:1c.1: bridge window [mem 0xf1f00000-0xf1ffffff] [ 0.537727] pci 0000:00:1c.2: PCI bridge to [bus 0d] [ 0.537842] acpiphp: Slot [1] registered [ 0.537849] pci 0000:00:1c.3: PCI bridge to [bus 0e-0f] [ 0.537854] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.537860] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf1efffff] [ 0.537867] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.537894] pci_bus 0000:03: extended config space not accessible [ 0.537970] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via CardBus function) [ 0.537972] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller [ 0.537975] pci 0000:03:01.0: [1180:0476] type 02 class 0x060700 [ 0.537996] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.538039] pci 0000:03:01.0: supports D1 D2 [ 0.538041] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538154] pci 0000:03:01.1: [1180:0832] type 00 class 0x0c0010 [ 0.538177] pci 0000:03:01.1: reg 0x10: [mem 0xf1bff800-0xf1bfffff] [ 0.538277] pci 0000:03:01.1: supports D1 D2 [ 0.538280] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538366] pci 0000:03:01.2: [1180:0822] type 00 class 0x080501 [ 0.538388] pci 0000:03:01.2: reg 0x10: [mem 0xf1bff600-0xf1bff6ff] [ 0.538487] pci 0000:03:01.2: supports D1 D2 [ 0.538489] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538617] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode) [ 0.538626] pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.538634] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.538637] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.538640] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.538642] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.538645] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode) [ 0.538648] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode) [ 0.538650] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode) [ 0.538653] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode) [ 0.538655] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.538658] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode) [ 0.538660] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode) [ 0.538663] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode) [ 0.538668] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode) [ 0.538699] pci_bus 0000:04: extended config space not accessible [ 0.538725] pci_bus 0000:04: busn_res: [bus 04] end can not be updated to 07 [ 0.538732] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07 [ 0.557616] ACPI: PCI: Interrupt link LNKA configured for IRQ 3 [ 0.557775] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.558002] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.558160] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.558317] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.558476] ACPI: PCI: Interrupt link LNKF configured for IRQ 3 [ 0.558633] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.558770] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.558773] ACPI: PCI: Interrupt link LNKH disabled [ 0.561885] ACPI: EC: interrupt unblocked [ 0.561887] ACPI: EC: event unblocked [ 0.561893] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.561895] ACPI: EC: GPE=0x11 [ 0.561901] ACPI: \_SB_.PCI0.ISAB.ECDV: Boot DSDT EC initialization complete [ 0.561905] ACPI: \_SB_.PCI0.ISAB.ECDV: EC: Used to handle transactions and events [ 0.562038] iommu: Default domain type: Translated [ 0.562195] SCSI subsystem initialized [ 0.562205] libata version 3.00 loaded. [ 0.562205] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.562205] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.562205] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.562205] vgaarb: loaded [ 0.562205] ACPI: bus type USB registered [ 0.562205] usbcore: registered new interface driver usbfs [ 0.562205] usbcore: registered new interface driver hub [ 0.562205] usbcore: registered new device driver usb [ 0.562205] pps_core: LinuxPPS API ver. 1 registered [ 0.562205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.562205] PTP clock support registered [ 0.562205] EDAC MC: Ver: 3.0.0 [ 0.562205] NetLabel: Initializing [ 0.562205] NetLabel: domain hash size = 128 [ 0.562205] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.562205] NetLabel: unlabeled traffic allowed by default [ 0.562205] PCI: Using ACPI for IRQ routing [ 0.564138] PCI: pci_cache_line_size set to 64 bytes [ 0.564238] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.564241] e820: reserve RAM buffer [mem 0xdf44d400-0xdfffffff] [ 0.567304] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.567312] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.567320] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.569404] clocksource: Switched to clocksource tsc-early [ 0.584602] VFS: Disk quotas dquot_6.6.0 [ 0.584632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.584822] AppArmor: AppArmor Filesystem Enabled [ 0.584875] pnp: PnP ACPI init [ 0.585032] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.585088] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.585138] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.585245] system 00:03: [io 0x0c80-0x0caf] has been reserved [ 0.585250] system 00:03: [io 0x0cc0-0x0cff] could not be reserved [ 0.585262] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.585382] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.585392] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.600256] system 00:05: [io 0x0cb0-0x0cbb] has been reserved [ 0.600260] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.600269] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.603142] system 00:06: [io 0x0900-0x092f] has been reserved [ 0.603146] system 00:06: [io 0x0931-0x0933] has been reserved [ 0.603152] system 00:06: [io 0x0935-0x097f] has been reserved [ 0.603155] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.603157] system 00:06: [io 0x1000-0x1005] has been reserved [ 0.603160] system 00:06: [io 0x1008-0x100f] has been reserved [ 0.603169] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.603237] system 00:07: [io 0xf400-0xf4fe] has been reserved [ 0.603241] system 00:07: [io 0x1006-0x1007] has been reserved [ 0.603244] system 00:07: [io 0x100a-0x1059] could not be reserved [ 0.603247] system 00:07: [io 0x1060-0x107f] has been reserved [ 0.603249] system 00:07: [io 0x1080-0x10bf] has been reserved [ 0.603252] system 00:07: [io 0x1100-0x111f] has been reserved [ 0.603255] system 00:07: [io 0x1010-0x102f] has been reserved [ 0.603257] system 00:07: [io 0x0809] has been reserved [ 0.603265] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.628516] system 00:08: [mem 0x00000000-0x0009efff] could not be reserved [ 0.628521] system 00:08: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.628524] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.628526] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.628529] system 00:08: [mem 0x00100000-0xdf44d3ff] could not be reserved [ 0.628532] system 00:08: [mem 0xdf44d400-0xdfefffff] could not be reserved [ 0.628535] system 00:08: [mem 0xdff00000-0xdfffffff] has been reserved [ 0.628538] system 00:08: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.628541] system 00:08: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.628544] system 00:08: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.628547] system 00:08: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.628550] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.628553] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.628555] system 00:08: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.628558] system 00:08: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.628561] system 00:08: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.628564] system 00:08: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.628567] system 00:08: [mem 0xfed1c800-0xfed1cfff] has been reserved [ 0.628570] system 00:08: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.628572] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.628581] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.631308] pnp: PnP ACPI: found 9 devices [ 0.638075] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.638167] NET: Registered protocol family 2 [ 0.638333] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.639905] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.640000] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.640213] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.640304] TCP: Hash tables configured (established 32768 bind 32768) [ 0.640448] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.640499] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.640535] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.640612] NET: Registered protocol family 1 [ 0.640620] NET: Registered protocol family 44 [ 0.640644] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000 [ 0.640650] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000 [ 0.640655] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000 [ 0.640659] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0c] add_size 1000 [ 0.640663] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000 [ 0.640667] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 0d] add_size 1000 [ 0.640671] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0d] add_size 200000 add_align 100000 [ 0.640675] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 0d] add_size 200000 add_align 100000 [ 0.640688] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 03-04] add_size 1000 [ 0.640713] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff] [ 0.640722] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.640730] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.640734] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf0800000-0xf09fffff] [ 0.640742] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.640748] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.640751] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.640755] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff] [ 0.640758] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.640766] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref] [ 0.640770] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.640774] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.640778] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff] [ 0.640781] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.640786] pci 0000:00:1c.0: PCI bridge to [bus 0b] [ 0.640790] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.640796] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff] [ 0.640801] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.640809] pci 0000:00:1c.1: PCI bridge to [bus 0c] [ 0.640812] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.640818] pci 0000:00:1c.1: bridge window [mem 0xf1f00000-0xf1ffffff] [ 0.640823] pci 0000:00:1c.1: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.640831] pci 0000:00:1c.2: PCI bridge to [bus 0d] [ 0.640835] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.640841] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf09fffff] [ 0.640846] pci 0000:00:1c.2: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.640854] pci 0000:00:1c.3: PCI bridge to [bus 0e-0f] [ 0.640858] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.640864] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf1efffff] [ 0.640869] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.640881] pci 0000:03:01.0: BAR 0: assigned [mem 0xfc000000-0xfc000fff] [ 0.640894] pci 0000:03:01.0: BAR 15: no space for [mem size 0x04000000 pref] [ 0.640897] pci 0000:03:01.0: BAR 15: failed to assign [mem size 0x04000000 pref] [ 0.640907] pci 0000:03:01.0: BAR 16: no space for [mem size 0x04000000] [ 0.640910] pci 0000:03:01.0: BAR 16: failed to assign [mem size 0x04000000] [ 0.640913] pci 0000:03:01.0: BAR 13: assigned [io 0x5000-0x50ff] [ 0.640916] pci 0000:03:01.0: BAR 14: assigned [io 0x5400-0x54ff] [ 0.640921] pci 0000:03:01.0: BAR 0: assigned [mem 0xfc000000-0xfc000fff] [ 0.640934] pci 0000:03:01.0: BAR 16: no space for [mem size 0x04000000] [ 0.640937] pci 0000:03:01.0: BAR 16: failed to assign [mem size 0x04000000] [ 0.640947] pci 0000:03:01.0: BAR 15: no space for [mem size 0x04000000 pref] [ 0.640950] pci 0000:03:01.0: BAR 15: failed to assign [mem size 0x04000000 pref] [ 0.640953] pci 0000:03:01.0: CardBus bridge to [bus 04] [ 0.640956] pci 0000:03:01.0: bridge window [io 0x5000-0x50ff] [ 0.640961] pci 0000:03:01.0: bridge window [io 0x5400-0x54ff] [ 0.640966] pci 0000:00:1e.0: PCI bridge to [bus 03-04] [ 0.640969] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] [ 0.640975] pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.640987] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.640989] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.640992] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.640994] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.640997] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.640999] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window] [ 0.641002] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window] [ 0.641004] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window] [ 0.641007] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.641009] pci_bus 0000:00: resource 13 [mem 0xfed90000-0xfed9ffff window] [ 0.641012] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff window] [ 0.641014] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff window] [ 0.641017] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff window] [ 0.641019] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.641022] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff] [ 0.641024] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.641027] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] [ 0.641029] pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff] [ 0.641032] pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.641035] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] [ 0.641037] pci_bus 0000:0c: resource 1 [mem 0xf1f00000-0xf1ffffff] [ 0.641039] pci_bus 0000:0c: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.641042] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff] [ 0.641044] pci_bus 0000:0d: resource 1 [mem 0xf0800000-0xf09fffff] [ 0.641047] pci_bus 0000:0d: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.641049] pci_bus 0000:0e: resource 0 [io 0xc000-0xcfff] [ 0.641052] pci_bus 0000:0e: resource 1 [mem 0xf1c00000-0xf1efffff] [ 0.641054] pci_bus 0000:0e: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.641057] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.641059] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.641061] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.641064] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.641066] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.641069] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.641071] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.641074] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window] [ 0.641076] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window] [ 0.641079] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window] [ 0.641081] pci_bus 0000:03: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.641084] pci_bus 0000:03: resource 13 [mem 0xfed90000-0xfed9ffff window] [ 0.641086] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff window] [ 0.641089] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff window] [ 0.641091] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff window] [ 0.641094] pci_bus 0000:04: resource 0 [io 0x5000-0x50ff] [ 0.641097] pci_bus 0000:04: resource 1 [io 0x5400-0x54ff] [ 0.644787] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.644816] PCI: CLS 64 bytes, default 64 [ 0.644828] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.644829] software IO TLB: mapped [mem 0x00000000db44d000-0x00000000df44d000] (64MB) [ 0.644927] Trying to unpack rootfs image as initramfs... [ 0.646928] Initialise system trusted keyrings [ 0.646955] Key type blacklist registered [ 0.647057] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.649269] zbud: loaded [ 0.649919] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.650344] fuse: init (API version 7.34) [ 0.650749] integrity: Platform Keyring initialized [ 0.663566] Key type asymmetric registered [ 0.663575] Asymmetric key parser 'x509' registered [ 0.663610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.666490] io scheduler mq-deadline registered [ 0.668387] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.668519] vesafb: mode is 1920x1200x32, linelength=7680, pages=0 [ 0.668523] vesafb: scrolling: redraw [ 0.668524] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.668575] vesafb: framebuffer at 0xf3000000, mapped to 0x(____ptrval____), using 9024k, total 9024k [ 0.668666] fbcon: Deferring console take-over [ 0.668668] fb0: VESA VGA frame buffer device [ 0.668842] Monitor-Mwait will be used to enter C-1 state [ 0.668851] Monitor-Mwait will be used to enter C-2 state [ 0.668856] Monitor-Mwait will be used to enter C-3 state [ 0.668861] ACPI: \_PR_.CPU0: Found 3 idle states [ 0.669297] ACPI: AC: AC Adapter [AC] (on-line) [ 0.669396] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.669458] ACPI: button: Lid Switch [LID] [ 0.669512] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.669554] ACPI: button: Power Button [PBTN] [ 0.669607] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.669637] ACPI: button: Sleep Button [SBTN] [ 0.680840] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.680849] ACPI: thermal: Thermal Zone [THM] (35 C) [ 0.681247] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.684264] Linux agpgart interface v0.103 [ 0.687796] ACPI: battery: Slot [BAT0] (battery absent) [ 0.687899] ACPI: battery: Slot [BAT1] (battery absent) [ 0.836981] loop: module loaded [ 0.837560] libphy: Fixed MDIO Bus: probed [ 0.837563] tun: Universal TUN/TAP device driver, 1.6 [ 0.837608] PPP generic driver version 2.4.2 [ 0.837695] VFIO - User Level meta-driver version: 0.3 [ 0.837834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.837841] ehci-pci: EHCI PCI platform driver [ 0.838200] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.838210] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.838226] ehci-pci 0000:00:1a.7: debug port 1 [ 0.842224] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.856939] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.857059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 0.857064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.857067] usb usb1: Product: EHCI Host Controller [ 0.857069] usb usb1: Manufacturer: Linux 5.13.0-28-generic ehci_hcd [ 0.857072] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.857281] hub 1-0:1.0: USB hub found [ 0.857293] hub 1-0:1.0: 6 ports detected [ 0.857989] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.857998] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.858016] ehci-pci 0000:00:1d.7: debug port 1 [ 0.861993] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.876936] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.877125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 0.877131] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.877134] usb usb2: Product: EHCI Host Controller [ 0.877136] usb usb2: Manufacturer: Linux 5.13.0-28-generic ehci_hcd [ 0.877139] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.877357] hub 2-0:1.0: USB hub found [ 0.877370] hub 2-0:1.0: 6 ports detected [ 0.877754] ehci-platform: EHCI generic platform driver [ 0.877792] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.877798] ohci-pci: OHCI PCI platform driver [ 0.877817] ohci-platform: OHCI generic platform driver [ 0.877828] uhci_hcd: USB Universal Host Controller Interface driver [ 0.878168] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.878179] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.878191] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.878218] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 [ 0.878319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 [ 0.878324] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.878326] usb usb3: Product: UHCI Host Controller [ 0.878328] usb usb3: Manufacturer: Linux 5.13.0-28-generic uhci_hcd [ 0.878330] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.878490] hub 3-0:1.0: USB hub found [ 0.878504] hub 3-0:1.0: 2 ports detected [ 0.878973] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.878981] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.878991] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.879030] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 [ 0.879129] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 [ 0.879134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.879137] usb usb4: Product: UHCI Host Controller [ 0.879139] usb usb4: Manufacturer: Linux 5.13.0-28-generic uhci_hcd [ 0.879141] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.879294] hub 4-0:1.0: USB hub found [ 0.879314] hub 4-0:1.0: 2 ports detected [ 0.879726] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.879736] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.879746] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.879771] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 [ 0.879843] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 [ 0.879848] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.879851] usb usb5: Product: UHCI Host Controller [ 0.879853] usb usb5: Manufacturer: Linux 5.13.0-28-generic uhci_hcd [ 0.879855] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.880000] hub 5-0:1.0: USB hub found [ 0.880011] hub 5-0:1.0: 2 ports detected [ 0.880449] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.880458] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.880468] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.880494] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 [ 0.880585] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 [ 0.880589] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.880592] usb usb6: Product: UHCI Host Controller [ 0.880594] usb usb6: Manufacturer: Linux 5.13.0-28-generic uhci_hcd [ 0.880596] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.880752] hub 6-0:1.0: USB hub found [ 0.880770] hub 6-0:1.0: 2 ports detected [ 0.881242] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.881255] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.881266] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.881293] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 [ 0.881371] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 [ 0.881375] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.881378] usb usb7: Product: UHCI Host Controller [ 0.881380] usb usb7: Manufacturer: Linux 5.13.0-28-generic uhci_hcd [ 0.881382] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.881550] hub 7-0:1.0: USB hub found [ 0.881560] hub 7-0:1.0: 2 ports detected [ 0.881998] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.882007] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.882016] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.882042] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.882124] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 [ 0.882129] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.882132] usb usb8: Product: UHCI Host Controller [ 0.882134] usb usb8: Manufacturer: Linux 5.13.0-28-generic uhci_hcd [ 0.882136] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.882280] hub 8-0:1.0: USB hub found [ 0.882296] hub 8-0:1.0: 2 ports detected [ 0.882608] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.883239] i8042: Warning: Keylock active [ 0.886266] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.886288] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.886574] mousedev: PS/2 mouse device common for all mice [ 0.886818] rtc_cmos 00:02: RTC can wake from S4 [ 0.887167] rtc_cmos 00:02: registered as rtc0 [ 0.887220] rtc_cmos 00:02: setting system clock to 2022-06-18T08:31:17 UTC (1655541077) [ 0.887262] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.887281] i2c /dev entries driver [ 0.888996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.891822] device-mapper: uevent: version 1.0.3 [ 0.892004] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.892077] platform eisa.0: Probing EISA bus 0 [ 0.892084] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.892089] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.892091] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.892094] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.892096] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.892098] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.892101] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.892103] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.892106] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.892108] platform eisa.0: EISA: Detected 0 cards [ 0.892114] intel_pstate: CPU model not supported [ 0.892159] ledtrig-cpu: registered to indicate activity on CPUs [ 0.892381] drop_monitor: Initializing network drop monitor service [ 0.892664] NET: Registered protocol family 10 [ 1.262450] Freeing initrd memory: 101344K [ 1.273027] Segment Routing with IPv6 [ 1.273072] NET: Registered protocol family 17 [ 1.273127] Key type dns_resolver registered [ 1.273439] microcode: sig=0x10676, pf=0x80, revision=0x610 [ 1.273486] microcode: Microcode Update Driver: v2.2. [ 1.273493] IPI shorthand broadcast: enabled [ 1.273515] sched_clock: Marking stable (1273220609, 259123)->(1285652922, -12173190) [ 1.273670] registered taskstats version 1 [ 1.273691] Loading compiled-in X.509 certificates [ 1.275018] Loaded X.509 cert 'Build time autogenerated kernel key: d6a21f46d6a67427d255b7091eb969d415d4bba9' [ 1.276229] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.277440] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.277443] blacklist: Loading compiled-in revocation X.509 certificates [ 1.277470] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.277643] zswap: loaded using pool lzo/zbud [ 1.277798] Key type ._fscrypt registered [ 1.277800] Key type .fscrypt registered [ 1.277802] Key type fscrypt-provisioning registered [ 1.282962] Key type encrypted registered [ 1.282970] AppArmor: AppArmor sha1 policy hashing enabled [ 1.282980] ima: No TPM chip found, activating TPM-bypass! [ 1.282987] Loading compiled-in module X.509 certificates [ 1.284209] Loaded X.509 cert 'Build time autogenerated kernel key: d6a21f46d6a67427d255b7091eb969d415d4bba9' [ 1.284212] ima: Allocated hash algorithm: sha1 [ 1.284223] ima: No architecture policies found [ 1.284242] evm: Initialising EVM extended attributes: [ 1.284243] evm: security.selinux [ 1.284245] evm: security.SMACK64 [ 1.284246] evm: security.SMACK64EXEC [ 1.284247] evm: security.SMACK64TRANSMUTE [ 1.284249] evm: security.SMACK64MMAP [ 1.284250] evm: security.apparmor [ 1.284251] evm: security.ima [ 1.284252] evm: security.capability [ 1.284253] evm: HMAC attrs: 0x1 [ 1.284683] PM: Magic number: 10:676:523 [ 1.286768] RAS: Correctable Errors collector initialized. [ 1.290826] Freeing unused decrypted memory: 2036K [ 1.291864] Freeing unused kernel image (initmem) memory: 2904K [ 1.306018] Write protecting the kernel read-only data: 30720k [ 1.307116] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.307900] Freeing unused kernel image (rodata/data gap) memory: 1796K [ 1.377896] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.377923] x86/mm: Checking user space page tables [ 1.417928] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.430828] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.430839] Run /init as init process [ 1.430841] with arguments: [ 1.430843] /init [ 1.430844] splash [ 1.430845] with environment: [ 1.430847] HOME=/ [ 1.430848] TERM=linux [ 1.430849] BOOT_IMAGE=/boot/vmlinuz-5.13.0-28-generic [ 1.616225] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 1.616234] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.616236] usb 3-1: Product: BCM2046B1 [ 1.616239] usb 3-1: Manufacturer: Broadcom [ 1.630097] hub 3-1:1.0: USB hub found [ 1.630531] ACPI: video: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.632192] hub 3-1:1.0: 3 ports detected [ 1.650120] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20979b79125, max_idle_ns: 440795244220 ns [ 1.650154] clocksource: Switched to clocksource tsc [ 1.673019] acpi device:37: registered as cooling_device2 [ 1.673538] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:35/LNXVIDEO:00/input/input5 [ 1.674279] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 1.675720] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.685140] e1000e: Intel(R) PRO/1000 Network Driver [ 1.685144] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.685493] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.709358] ahci 0000:00:1f.2: version 3.0 [ 1.709739] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.709775] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.709780] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.714293] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.717873] sdhci: Secure Digital Host Controller Interface driver [ 1.717875] sdhci: Copyright(c) Pierre Ossman [ 1.733846] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21) [ 1.759227] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 1.762535] random: fast init done [ 1.765583] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA [ 1.767631] scsi host0: ahci [ 1.775418] scsi host1: ahci [ 1.798541] scsi host2: ahci [ 1.808377] scsi host3: ahci [ 1.814960] scsi host4: ahci [ 1.825063] scsi host5: ahci [ 1.825165] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 25 [ 1.825171] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 25 [ 1.825173] ata3: DUMMY [ 1.825175] ata4: DUMMY [ 1.825178] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 25 [ 1.825181] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 25 [ 1.835911] firewire_ohci 0000:03:01.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 1.908751] gpio_ich gpio_ich.2.auto: GPIO from 451 to 511 [ 1.909219] checking generic (f3000000 8d0000) vs hw (f5000000 1000000) [ 1.909222] checking generic (f3000000 8d0000) vs hw (e0000000 10000000) [ 1.909224] checking generic (f3000000 8d0000) vs hw (f2000000 2000000) [ 1.909226] fb0: switching to nouveaufb from VESA VGA [ 1.909355] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 1.909513] nouveau 0000:01:00.0: NVIDIA G98 (298580a2) [ 1.911986] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:70:eb:54:ca [ 1.911992] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.912054] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 4003FF-0FF [ 1.914351] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.926040] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.948529] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd [ 1.950721] nouveau 0000:01:00.0: bios: version 62.98.73.00.04 [ 1.971808] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 [ 1.990367] random: crng init done [ 2.055305] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB [ 2.055310] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.055318] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.055322] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.055327] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034 [ 2.055332] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000028 [ 2.055336] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022386 0f200010 [ 2.055340] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022332 00020010 [ 2.055344] nouveau 0000:01:00.0: DRM: DCB outp 04: 040333a6 0f200010 [ 2.055349] nouveau 0000:01:00.0: DRM: DCB outp 05: 04033312 00020010 [ 2.055353] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040 [ 2.055357] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100 [ 2.055361] nouveau 0000:01:00.0: DRM: DCB conn 02: 00005246 [ 2.055365] nouveau 0000:01:00.0: DRM: DCB conn 03: 0000a346 [ 2.060741] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 2.113959] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.129917] i801_smbus 0000:00:1f.3: Timeout waiting for interrupt! [ 2.129920] i801_smbus 0000:00:1f.3: Transaction timeout [ 2.133992] usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157, bcdDevice= 1.00 [ 2.133996] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.156549] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x50000, bo 0000000031a35f2f [ 2.156659] fbcon: nouveaudrmfb (fb0) is primary device [ 2.156664] fbcon: Deferring console take-over [ 2.156667] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 2.174463] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.217933] usb 3-1.2: new full-speed USB device number 4 using uhci_hcd [ 2.270367] usb 1-3: New USB device found, idVendor=413c, idProduct=2513, bcdDevice=a0.05 [ 2.270387] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.271402] hub 1-3:1.0: USB hub found [ 2.271592] hub 1-3:1.0: 3 ports detected [ 2.301977] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302698] ata1.00: NCQ Send/Recv Log not supported [ 2.302706] ata1.00: ATA-9: SAMSUNG MZ7PD128HCFV-000H1, DXM01H0Q, max UDMA/133 [ 2.302714] ata1.00: 250069680 sectors, multi 8: LBA48 NCQ (depth 32), AA [ 2.303345] ata1.00: NCQ Send/Recv Log not supported [ 2.303646] ata1.00: configured for UDMA/133 [ 2.314343] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PD128 1H0Q PQ: 0 ANSI: 5 [ 2.315228] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.315284] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.315331] sd 0:0:0:0: [sda] Write Protect is off [ 2.315336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.315381] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.330551] sda: sda1 sda2 sda3 [ 2.333921] i801_smbus 0000:00:1f.3: Timeout waiting for interrupt! [ 2.333925] i801_smbus 0000:00:1f.3: Transaction timeout [ 2.342689] usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158, bcdDevice= 1.00 [ 2.342696] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.351884] hid: raw HID events driver (C) Jiri Kosina [ 2.354190] firewire_core 0000:03:01.1: created device fw0: GUID 334fc0002e8b2090, S400 [ 2.358052] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.364083] usbcore: registered new interface driver usbhid [ 2.364086] usbhid: USB HID core driver [ 2.368751] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:413C:8157.0001/input/input7 [ 2.397940] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 2.426109] hid-generic 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0 [ 2.426792] input: HID 413c:8158 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:413C:8158.0002/input/input8 [ 2.427144] hid-generic 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0 [ 2.554359] usb 1-4: New USB device found, idVendor=413c, idProduct=2513, bcdDevice=a0.05 [ 2.554377] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.554982] hub 1-4:1.0: USB hub found [ 2.555115] hub 1-4:1.0: 3 ports detected [ 2.673931] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large: [ 2.673947] clocksource: 'hpet' wd_now: 32120db wd_last: 1c72140 mask: ffffffff [ 2.673954] clocksource: 'tsc' cs_now: 8003b9503 cs_last: 7bf8a4cb7 mask: ffffffffffffffff [ 2.673981] tsc: Marking TSC unstable due to clocksource watchdog [ 2.674013] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 2.674017] sched_clock: Marking unstable (2673753688, 259275)<-(2686186175, -12173190) [ 2.674388] clocksource: Checking clocksource tsc synchronization from CPU 1. [ 2.674467] clocksource: Switched to clocksource hpet [ 2.789820] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input10 [ 2.789991] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.794087] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-U20N, A101, max UDMA/133 [ 2.798970] ata2.00: configured for UDMA/133 [ 2.809045] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-U20N A101 PQ: 0 ANSI: 5 [ 2.809192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.862087] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.862104] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.890211] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.922357] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.922794] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.085427] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01 [ 3.085447] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.085455] usb 5-1: Product: 5880 [ 3.085461] usb 5-1: Manufacturer: Broadcom Corp [ 3.085466] usb 5-1: SerialNumber: 0123456789ABCD [ 3.085816] usb 5-1: config 0 descriptor?? [ 3.236592] ata5: SATA link down (SStatus 0 SControl 300) [ 3.538190] usb 1-4.1: new low-speed USB device number 6 using ehci-pci [ 3.556852] ata6: SATA link down (SStatus 0 SControl 300) [ 3.659796] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00 [ 3.659805] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.659809] usb 1-4.1: Product: USB-PS/2 Optical Mouse [ 3.659813] usb 1-4.1: Manufacturer: Logitech [ 3.663407] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C03E.0003/input/input11 [ 3.663584] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-4.1/input0 [ 4.333910] raid6: sse2x4 gen() 134565 MB/s [ 4.381907] raid6: sse2x4 xor() 54592 MB/s [ 4.429906] raid6: sse2x2 gen() 135765 MB/s [ 4.477906] raid6: sse2x2 xor() 84030 MB/s [ 4.525906] raid6: sse2x1 gen() 112218 MB/s [ 4.573906] raid6: sse2x1 xor() 68590 MB/s [ 4.573908] raid6: using algorithm sse2x2 gen() 6000 MB/s [ 4.573910] raid6: .... xor() 84030 MB/s, rmw enabled [ 4.573911] raid6: using ssse3x2 recovery algorithm [ 4.578766] xor: measuring software checksum speed [ 4.579589] prefetch64-sse : 12051 MB/sec [ 4.580563] generic_sse : 10264 MB/sec [ 4.580565] xor: using function: prefetch64-sse (12051 MB/sec) [ 4.627228] Btrfs loaded, crc32c=crc32c-generic, zoned=yes [ 4.869654] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.798934] systemd[1]: Inserted module 'autofs4' [ 5.826268] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.846076] systemd[1]: Detected architecture x86-64. [ 5.875233] systemd[1]: Set hostname to <jim-latitudee5500>. [ 6.155275] systemd[1]: Created slice system-modprobe.slice. [ 6.155675] systemd[1]: Created slice User and Session Slice. [ 6.155794] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.156092] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.156162] systemd[1]: Reached target User and Group Name Lookups. [ 6.156197] systemd[1]: Reached target Remote File Systems. [ 6.156232] systemd[1]: Reached target Slices. [ 6.156271] systemd[1]: Reached target Swap. [ 6.156407] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 6.156584] systemd[1]: Listening on LVM2 poll daemon socket. [ 6.156748] systemd[1]: Listening on Syslog Socket. [ 6.156899] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.156995] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.157304] systemd[1]: Listening on Journal Audit Socket. [ 6.157451] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.157634] systemd[1]: Listening on Journal Socket. [ 6.157829] systemd[1]: Listening on udev Control Socket. [ 6.157993] systemd[1]: Listening on udev Kernel Socket. [ 6.159510] systemd[1]: Mounting Huge Pages File System... [ 6.161278] systemd[1]: Mounting POSIX Message Queue File System... [ 6.163273] systemd[1]: Mounting Kernel Debug File System... [ 6.165021] systemd[1]: Mounting Kernel Trace File System... [ 6.167496] systemd[1]: Starting Journal Service... [ 6.169232] systemd[1]: Starting Availability of block devices... [ 6.171669] systemd[1]: Starting Set the console keyboard layout... [ 6.175360] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.178532] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 6.178613] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 6.191438] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.191518] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.195844] systemd[1]: Starting Load Kernel Modules... [ 6.197785] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.211112] systemd[1]: Starting udev Coldplug all Devices... [ 6.214195] EXT4-fs (sda3): re-mounted. Opts: discard. Quota mode: none. [ 6.220316] systemd[1]: Starting Uncomplicated firewall... [ 6.232350] systemd[1]: Mounted Huge Pages File System. [ 6.233675] systemd[1]: Mounted POSIX Message Queue File System. [ 6.234390] systemd[1]: Mounted Kernel Debug File System. [ 6.237442] systemd[1]: Mounted Kernel Trace File System. [ 6.238838] systemd[1]: Finished Availability of block devices. [ 6.240256] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.241589] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.243085] systemd[1]: Finished Uncomplicated firewall. [ 6.244254] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 6.244320] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.245978] systemd[1]: Starting Load/Save Random Seed... [ 6.247610] systemd[1]: Starting Create System Users... [ 6.258549] lp: driver loaded but no devices found [ 6.261847] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 6.280336] ppdev: user-space parallel port driver [ 6.382311] systemd[1]: Finished Set the console keyboard layout. [ 6.422139] systemd[1]: Finished udev Coldplug all Devices. [ 6.450205] systemd[1]: Finished Create System Users. [ 6.451121] systemd[1]: Finished Load/Save Random Seed. [ 6.458293] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.463928] systemd[1]: Finished Load Kernel Modules. [ 6.465877] systemd[1]: Mounting FUSE Control File System... [ 6.470159] systemd[1]: Mounting Kernel Configuration File System... [ 6.475372] systemd[1]: Starting Apply Kernel Variables... [ 6.483472] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.483918] systemd[1]: Mounted FUSE Control File System. [ 6.484145] systemd[1]: Reached target Local File Systems (Pre). [ 6.495822] systemd[1]: Mounting Mount unit for bare, revision 5... [ 6.498743] systemd[1]: Mounting Mount unit for core18, revision 2344... [ 6.501257] loop0: detected capacity change from 0 to 8 [ 6.506527] systemd[1]: Mounting Mount unit for core18, revision 2409... [ 6.513335] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 161... [ 6.515409] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519... [ 6.517341] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1534... [ 6.520541] systemd[1]: Mounting Mount unit for snapd, revision 15534... [ 6.522377] systemd[1]: Mounting Mount unit for snapd, revision 16010... [ 6.526045] loop1: detected capacity change from 0 to 113696 [ 6.529795] systemd[1]: Mounting Mount unit for whatsapp-for-linux, revision 31... [ 6.531759] systemd[1]: Mounting Mount unit for whatsapp-for-linux, revision 35... [ 6.533467] systemd[1]: Mounting /tmp... [ 6.535646] systemd[1]: Starting udev Kernel Device Manager... [ 6.545389] systemd[1]: Mounted Kernel Configuration File System. [ 6.562533] loop2: detected capacity change from 0 to 337424 [ 6.571554] systemd[1]: Finished Apply Kernel Variables. [ 6.582024] loop3: detected capacity change from 0 to 133552 [ 6.587689] systemd[1]: Mounted Mount unit for bare, revision 5. [ 6.590668] systemd[1]: Mounted Mount unit for core18, revision 2344. [ 6.602111] systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 161. [ 6.603152] systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1519. [ 6.604494] systemd[1]: Mounted /tmp. [ 6.610122] loop4: detected capacity change from 0 to 113736 [ 6.630521] loop5: detected capacity change from 0 to 166424 [ 6.633345] systemd[1]: Mounted Mount unit for core18, revision 2409. [ 6.641129] systemd[1]: Started Journal Service. [ 6.653336] systemd-journald[331]: Received client request to flush runtime journal. [ 6.655026] loop6: detected capacity change from 0 to 96160 [ 6.662377] loop7: detected capacity change from 0 to 228712 [ 6.702354] loop8: detected capacity change from 0 to 91496 [ 6.746005] loop9: detected capacity change from 0 to 228720 [ 6.844153] audit: type=1400 audit(1655541083.451:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=422 comm="apparmor_parser" [ 6.844161] audit: type=1400 audit(1655541083.451:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=422 comm="apparmor_parser" [ 6.852858] audit: type=1400 audit(1655541083.459:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=423 comm="apparmor_parser" [ 6.866053] audit: type=1400 audit(1655541083.475:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=424 comm="apparmor_parser" [ 6.876613] audit: type=1400 audit(1655541083.483:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=426 comm="apparmor_parser" [ 6.891439] audit: type=1400 audit(1655541083.499:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=427 comm="apparmor_parser" [ 6.998895] audit: type=1400 audit(1655541083.603:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=421 comm="apparmor_parser" [ 6.998904] audit: type=1400 audit(1655541083.603:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=421 comm="apparmor_parser" [ 7.007734] audit: type=1400 audit(1655541083.615:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=428 comm="apparmor_parser" [ 7.007743] audit: type=1400 audit(1655541083.615:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=428 comm="apparmor_parser" [ 8.209433] fbcon: Taking over console [ 8.215298] Bluetooth: Core ver 2.22 [ 8.215339] NET: Registered protocol family 31 [ 8.215341] Bluetooth: HCI device and connection manager initialized [ 8.215347] Bluetooth: HCI socket layer initialized [ 8.215351] Bluetooth: L2CAP socket layer initialized [ 8.215357] Bluetooth: SCO socket layer initialized [ 8.271549] Console: switching to colour frame buffer device 240x75 [ 10.386942] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.393104] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:024f] [ 10.393138] yenta_cardbus 0000:03:01.0: CardBus bridge to [bus 04] [ 10.393141] yenta_cardbus 0000:03:01.0: bridge window [io 0x5000-0x50ff] [ 10.393147] yenta_cardbus 0000:03:01.0: bridge window [io 0x5400-0x54ff] [ 10.393152] yenta_cardbus 0000:03:01.0: bridge window [mem 0xf0c00000-0xf0ffffff] [ 10.393157] yenta_cardbus 0000:03:01.0: bridge window [mem 0xf1000000-0xf13fffff] [ 10.416640] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.531246] loop10: detected capacity change from 0 to 8 [ 10.562863] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19 [ 10.562872] yenta_cardbus 0000:03:01.0: Socket status: 30000006 [ 10.565342] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] [ 10.565351] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf1b00000-0xf1bfffff] [ 10.565355] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf1b00000-0xf1bfffff: [ 10.565365] excluding 0xf1bf0000-0xf1bfffff [ 10.679220] Intel(R) Wireless WiFi driver for Linux [ 10.679454] iwlwifi 0000:0c:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.688818] iwlwifi 0000:0c:00.0: loaded firmware version 8.83.5.1 build 33692 5000-5.ucode op_mode iwldvm [ 10.771858] usb 3-1.3: new full-speed USB device number 5 using uhci_hcd [ 10.813478] iwlwifi 0000:0c:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 10.813485] iwlwifi 0000:0c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 10.813488] iwlwifi 0000:0c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 10.813490] iwlwifi 0000:0c:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 [ 10.839860] wl: loading out-of-tree module taints kernel. [ 10.839872] wl: module license 'MIXED/Proprietary' taints kernel. [ 10.839874] Disabling lock debugging due to kernel taint [ 10.874271] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 10.924350] usb 3-1.3: New USB device found, idVendor=413c, idProduct=8156, bcdDevice= 4.56 [ 10.924358] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.924361] usb 3-1.3: Product: Dell Wireless 370 Bluetooth Mini-card [ 10.924364] usb 3-1.3: Manufacturer: Dell Computer Corp [ 10.928783] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 10.941160] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 11.011551] intel_powerclamp: No package C-state available [ 11.039393] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12 [ 11.039544] wl: module verification failed: signature and/or required key missing - tainting kernel [ 11.053404] intel_powerclamp: No package C-state available [ 12.216010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.216017] Bluetooth: BNEP filters: protocol multicast [ 12.216024] Bluetooth: BNEP socket layer initialized [ 12.273973] dell_laptop: Using i8042 filter function for receiving events [ 13.034079] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line [ 13.034089] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 13.034092] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 13.034095] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 13.034097] snd_hda_codec_idt hdaudioC0D0: inputs: [ 13.034100] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xe [ 13.034102] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x18 [ 13.034104] snd_hda_codec_idt hdaudioC0D0: Mic=0xb [ 13.103142] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 13.103247] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 13.103350] input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 13.103431] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 13.376579] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 13.376595] excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 13.376631] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 13.378115] excluding 0xa0000000-0xa0ffffff [ 13.378158] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 13.378177] excluding 0x60000000-0x60ffffff [ 13.557347] iwlwifi 0000:0c:00.0 wlp12s0: renamed from wlan0 [ 13.842825] leds dell::kbd_backlight: Setting an LED's brightness failed (-5) [ 14.429069] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0 [ 14.510492] usbcore: registered new interface driver btusb [ 14.589065] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0 [ 14.743653] Bluetooth: RFCOMM TTY layer initialized [ 14.743667] Bluetooth: RFCOMM socket layer initialized [ 14.743680] Bluetooth: RFCOMM ver 1.11 [ 17.951850] wlp12s0: authenticate with f2:2f:9c:92:66:a0 [ 17.956120] wlp12s0: send auth to f2:2f:9c:92:66:a0 (try 1/3) [ 17.971636] wlp12s0: authenticated [ 17.974238] wlp12s0: associate with f2:2f:9c:92:66:a0 (try 1/3) [ 17.976877] wlp12s0: RX AssocResp from f2:2f:9c:92:66:a0 (capab=0x421 status=0 aid=1) [ 17.982233] wlp12s0: associated [ 17.983580] IPv6: ADDRCONF(NETDEV_CHANGE): wlp12s0: link becomes ready [ 52.972205] wlp12s0: disconnect from AP f2:2f:9c:92:66:a0 for new auth to 56:f8:9a:2a:20:74 [ 53.008300] wlp12s0: authenticate with 56:f8:9a:2a:20:74 [ 53.010351] wlp12s0: send auth to 56:f8:9a:2a:20:74 (try 1/3) [ 53.012914] wlp12s0: authenticated [ 53.017946] wlp12s0: associate with 56:f8:9a:2a:20:74 (try 1/3) [ 53.020337] wlp12s0: RX ReassocResp from 56:f8:9a:2a:20:74 (capab=0x421 status=0 aid=1) [ 53.022410] wlp12s0: associated