staging.inyokaproject.org

Hallo, ich erhalte folgende Fehlermeldungen wenn ich in die Console tty1 bis tty6 umschalte:

  156.140773] ata3: hard resetting link
[  156.624034] ata3: softreset failed (device not ready)
[  156.626362] ata3: applying SB600 PMP SRST workaround and retrying
[  156.788043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  156.801521] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  156.816075] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  156.816082] ata3.00: configured for UDMA/100
[  156.816639] ata3: EH complete
[  162.148083] ata3.00: qc timeout (cmd 0xa0)
[  162.148110] ata3.00: limiting speed to UDMA/66:PIO4
[  162.148120] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  162.148259] ata3.00: irq_stat 0x40000001
[  162.148335] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  162.148360] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  162.148363]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  162.148601] ata3.00: status: { DRDY ERR }
[  162.148681] ata3: hard resetting link
[  162.632057] ata3: softreset failed (device not ready)
[  162.632160] ata3: applying SB600 PMP SRST workaround and retrying
[  162.796048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  162.809548] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  162.824094] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  162.824100] ata3.00: configured for UDMA/66
[  162.824661] ata3: EH complete
[  168.496068] ata3.00: qc timeout (cmd 0xa0)
[  168.496095] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  168.496232] ata3.00: irq_stat 0x40000001
[  168.496308] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  168.496333] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  168.496336]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  168.496575] ata3.00: status: { DRDY ERR }
[  168.496656] ata3: hard resetting link
[  168.980024] ata3: softreset failed (device not ready)
[  168.980121] ata3: applying SB600 PMP SRST workaround and retrying
[  169.096514] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  169.152222] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  169.165968] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  169.180141] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  169.180153] ata3.00: configured for UDMA/66
[  169.180748] ata3: EH complete
[  177.952066] ata3.00: qc timeout (cmd 0xa0)
[  177.952096] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  177.952105] ata3.00: irq_stat 0x40000001
[  177.952112] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  177.952137] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  177.952140]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  177.952147] ata3.00: status: { DRDY ERR }
[  177.952159] ata3: hard resetting link
[  178.436783] ata3: softreset failed (device not ready)
[  178.436794] ata3: applying SB600 PMP SRST workaround and retrying
[  178.600038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  178.613508] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  178.627961] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  178.627965] ata3.00: configured for UDMA/66
[  178.628480] ata3: EH complete
[  193.008054] ata3.00: qc timeout (cmd 0xa0)
[  193.008081] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  193.008088] ata3.00: irq_stat 0x40000001
[  193.008095] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  193.008119] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  193.008122]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  193.008129] ata3.00: status: { DRDY ERR }
[  193.008141] ata3: hard resetting link
[  193.492051] ata3: softreset failed (device not ready)
[  193.492060] ata3: applying SB600 PMP SRST workaround and retrying
[  193.656080] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  193.669610] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  193.684158] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  193.684165] ata3.00: configured for UDMA/66
[  193.684726] ata3: EH complete
[  204.488068] ata3.00: qc timeout (cmd 0xa0)
[  204.488096] ata3.00: limiting speed to UDMA/33:PIO4
[  204.488107] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  204.488115] ata3.00: irq_stat 0x40000001
[  204.488122] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  204.488147] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  204.488149]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  204.488156] ata3.00: status: { DRDY ERR }
[  204.488167] ata3: hard resetting link
[  204.972032] ata3: softreset failed (device not ready)
[  204.972041] ata3: applying SB600 PMP SRST workaround and retrying
[  205.136063] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  205.149610] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  205.164158] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  205.164165] ata3.00: configured for UDMA/33
[  205.164726] ata3: EH complete
[  215.816050] ata3.00: qc timeout (cmd 0xa0)
[  215.816077] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  215.816085] ata3.00: irq_stat 0x40000001
[  215.816093] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  215.816117] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  215.816120]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  215.816127] ata3.00: status: { DRDY ERR }
[  215.816138] ata3: hard resetting link
[  216.300023] ata3: softreset failed (device not ready)
[  216.300028] ata3: applying SB600 PMP SRST workaround and retrying
[  216.464085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  216.477584] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  216.492131] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  216.492138] ata3.00: configured for UDMA/33
[  216.492704] ata3: EH complete
[  226.868065] ata3.00: qc timeout (cmd 0xa0)
[  226.868102] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  226.868112] ata3.00: irq_stat 0x40000001
[  226.868122] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  226.868149] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  226.868152]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  226.868159] ata3.00: status: { DRDY ERR }
[  226.868174] ata3: hard resetting link
[  227.352034] ata3: softreset failed (device not ready)
[  227.352046] ata3: applying SB600 PMP SRST workaround and retrying
[  227.516048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  227.529525] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  227.544076] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  227.544083] ata3.00: configured for UDMA/33
[  227.544644] ata3: EH complete
[  240.035908] ata3.00: qc timeout (cmd 0xa0)
[  240.035940] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  240.035950] ata3.00: irq_stat 0x40000001
[  240.035958] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  240.035984] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  240.035987]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  240.035994] ata3.00: status: { DRDY ERR }
[  240.036006] ata3: hard resetting link
[  240.520041] ata3: softreset failed (device not ready)
[  240.520053] ata3: applying SB600 PMP SRST workaround and retrying
[  240.684074] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  240.697823] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  240.711988] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  240.711995] ata3.00: configured for UDMA/33
[  240.712568] ata3: EH complete
[  247.228060] ata3.00: qc timeout (cmd 0xa0)
[  247.228090] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  247.228227] ata3.00: irq_stat 0x40000001
[  247.228302] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  247.228328] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  247.228330]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  247.228566] ata3.00: status: { DRDY ERR }
[  247.228647] ata3: hard resetting link
[  247.712040] ata3: softreset failed (device not ready)
[  247.712141] ata3: applying SB600 PMP SRST workaround and retrying
[  247.876056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  247.889587] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  247.904139] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  247.904146] ata3.00: configured for UDMA/33
[  247.904705] ata3: EH complete
[  255.472082] ata3.00: qc timeout (cmd 0xa0)
[  255.472113] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  255.476870] ata3.00: irq_stat 0x40000001
[  255.481639] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  255.481666] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  255.481669]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  255.491245] ata3.00: status: { DRDY ERR }
[  255.495900] ata3: hard resetting link
[  255.976043] ata3: softreset failed (device not ready)
[  255.980747] ata3: applying SB600 PMP SRST workaround and retrying
[  256.144049] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  256.157541] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  256.172092] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  256.172098] ata3.00: configured for UDMA/33
[  256.172658] ata3: EH complete
[  263.756053] ata3.00: qc timeout (cmd 0xa0)
[  263.756084] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  263.760485] ata3.00: irq_stat 0x40000001
[  263.764878] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  263.764903] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  263.764906]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  263.773690] ata3.00: status: { DRDY ERR }
[  263.778084] ata3: hard resetting link
[  264.260031] ata3: softreset failed (device not ready)
[  264.264457] ata3: applying SB600 PMP SRST workaround and retrying
[  264.428048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  264.441546] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  264.456094] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  264.456101] ata3.00: configured for UDMA/33
[  264.456685] ata3: EH complete
[  270.784054] ata3.00: qc timeout (cmd 0xa0)
[  270.784080] ata3.00: limiting speed to PIO4
[  270.784091] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  270.788551] ata3.00: irq_stat 0x40000001
[  270.792982] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  270.793009] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  270.793013]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  270.801900] ata3.00: status: { DRDY ERR }
[  270.806358] ata3: hard resetting link
[  271.258505] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  271.288050] ata3: softreset failed (device not ready)
[  271.288061] ata3: applying SB600 PMP SRST workaround and retrying
[  271.452094] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  271.465607] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  271.480032] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  271.480039] ata3.00: configured for PIO4
[  271.480602] ata3: EH complete
[  279.684054] ata3.00: qc timeout (cmd 0xa0)
[  279.684083] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  279.684092] ata3.00: irq_stat 0x40000001
[  279.684099] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  279.684123] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  279.684126]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  279.684133] ata3.00: status: { DRDY ERR }
[  279.684144] ata3: hard resetting link
[  280.168052] ata3: softreset failed (device not ready)
[  280.168063] ata3: applying SB600 PMP SRST workaround and retrying
[  280.332053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  280.345592] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  280.359988] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  280.359995] ata3.00: configured for PIO4
[  280.360561] ata3: EH complete
[  288.652086] ata3.00: qc timeout (cmd 0xa0)
[  288.652114] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  288.652123] ata3.00: irq_stat 0x40000001
[  288.652130] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  288.652154] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  288.652157]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  288.652164] ata3.00: status: { DRDY ERR }
[  288.652174] ata3: hard resetting link
[  289.136049] ata3: softreset failed (device not ready)
[  289.136059] ata3: applying SB600 PMP SRST workaround and retrying
[  289.300044] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  289.313544] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  289.327950] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  289.327958] ata3.00: configured for PIO4
[  289.328525] ata3: EH complete
[  302.920073] ata3.00: qc timeout (cmd 0xa0)
[  302.920101] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  302.920110] ata3.00: irq_stat 0x40000001
[  302.920117] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  302.920142] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  302.920145]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  302.920152] ata3.00: status: { DRDY ERR }
[  302.920163] ata3: hard resetting link
[  303.404086] ata3: softreset failed (device not ready)
[  303.404101] ata3: applying SB600 PMP SRST workaround and retrying
[  303.568063] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  303.581563] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  303.595968] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  303.595976] ata3.00: configured for PIO4
[  303.596537] ata3: EH complete
[  319.932043] ata3.00: qc timeout (cmd 0xa0)
[  319.932071] ata3.00: limiting speed to PIO3
[  319.932082] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  319.932089] ata3.00: irq_stat 0x40000001
[  319.932096] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  319.932120] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  319.932123]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  319.932130] ata3.00: status: { DRDY ERR }
[  319.932141] ata3: hard resetting link
[  320.416066] ata3: softreset failed (device not ready)
[  320.416076] ata3: applying SB600 PMP SRST workaround and retrying
[  320.580070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  320.593578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  320.607985] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  320.607992] ata3.00: configured for PIO3
[  320.608555] ata3: EH complete
[  326.108567] ata3.00: qc timeout (cmd 0xa0)
[  326.108598] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  326.108607] ata3.00: irq_stat 0x40000001
[  326.108614] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  326.108639] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  326.108642]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  326.108649] ata3.00: status: { DRDY ERR }
[  326.108661] ata3: hard resetting link
[  326.592037] ata3: softreset failed (device not ready)
[  326.592049] ata3: applying SB600 PMP SRST workaround and retrying
[  326.757095] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  326.772074] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  326.786419] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  326.786424] ata3.00: configured for PIO3
[  326.786942] ata3: EH complete
[  336.948050] ata3.00: qc timeout (cmd 0xa0)
[  336.948078] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  336.948087] ata3.00: irq_stat 0x40000001
[  336.948094] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  336.948119] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  336.948121]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  336.948128] ata3.00: status: { DRDY ERR }
[  336.948139] ata3: hard resetting link
[  337.432067] ata3: softreset failed (device not ready)
[  337.432075] ata3: applying SB600 PMP SRST workaround and retrying
[  337.596069] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  337.609574] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  337.623979] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  337.623985] ata3.00: configured for PIO3
[  337.624544] ata3: EH complete
[  346.128083] ata3.00: qc timeout (cmd 0xa0)
[  346.128112] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  346.128121] ata3.00: irq_stat 0x40000001
[  346.128128] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  346.128153] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  346.128156]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  346.128163] ata3.00: status: { DRDY ERR }
[  346.128173] ata3: hard resetting link
[  346.616035] ata3: softreset failed (device not ready)
[  346.616046] ata3: applying SB600 PMP SRST workaround and retrying
[  346.781055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  346.794550] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  346.811291] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  346.811305] ata3.00: configured for PIO3
[  346.811858] ata3: EH complete
[  352.496077] ata3.00: qc timeout (cmd 0xa0)
[  352.496106] ata3.00: limiting speed to PIO0
[  352.496116] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  352.496124] ata3.00: irq_stat 0x40000001
[  352.496131] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  352.496155] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  352.496158]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  352.496165] ata3.00: status: { DRDY ERR }
[  352.496176] ata3: hard resetting link
[  352.980060] ata3: softreset failed (device not ready)
[  352.980067] ata3: applying SB600 PMP SRST workaround and retrying
[  353.144057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  353.157559] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  353.171955] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  353.171961] ata3.00: configured for PIO0
[  353.172522] ata3: EH complete
[  366.444054] ata3.00: qc timeout (cmd 0xa0)
[  366.444083] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  366.444091] ata3.00: irq_stat 0x40000001
[  366.444098] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  366.444122] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  366.444125]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  366.444132] ata3.00: status: { DRDY ERR }
[  366.444143] ata3: hard resetting link
[  366.928073] ata3: softreset failed (device not ready)
[  366.928082] ata3: applying SB600 PMP SRST workaround and retrying
[  367.092056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  367.105546] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  367.119948] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  367.119956] ata3.00: configured for PIO0
[  367.120523] ata3: EH complete
[  372.792052] ata3.00: qc timeout (cmd 0xa0)
[  372.792081] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  372.792089] ata3.00: irq_stat 0x40000001
[  372.792097] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  372.792122] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  372.792125]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  372.792132] ata3.00: status: { DRDY ERR }
[  372.792143] ata3: hard resetting link
[  373.276030] ata3: softreset failed (device not ready)
[  373.276037] ata3: applying SB600 PMP SRST workaround and retrying
[  373.440098] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  373.453616] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  373.468232] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  373.468246] ata3.00: configured for PIO0
[  373.468829] ata3: EH complete
[  378.820221] ata3.00: qc timeout (cmd 0xa0)
[  378.820249] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  378.820257] ata3.00: irq_stat 0x40000001
[  378.820264] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  378.820290] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  378.820293]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  378.820300] ata3.00: status: { DRDY ERR }
[  378.820311] ata3: hard resetting link
[  379.304038] ata3: softreset failed (device not ready)
[  379.304049] ata3: applying SB600 PMP SRST workaround and retrying
[  379.468188] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  379.481689] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  379.496099] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  379.496109] ata3.00: configured for PIO0
[  379.496664] ata3: EH complete
[  387.148241] ata3.00: qc timeout (cmd 0xa0)
[  387.148271] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  387.148280] ata3.00: irq_stat 0x40000001
[  387.148287] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  387.148313] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  387.148316]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  387.148323] ata3.00: status: { DRDY ERR }
[  387.148334] ata3: hard resetting link
[  387.632042] ata3: softreset failed (device not ready)
[  387.632052] ata3: applying SB600 PMP SRST workaround and retrying
[  387.796067] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  387.809570] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  387.823971] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  387.823980] ata3.00: configured for PIO0
[  387.824552] ata3: EH complete
[  393.580084] ata3.00: qc timeout (cmd 0xa0)
[  393.580116] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  393.580124] ata3.00: irq_stat 0x40000001
[  393.580131] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  393.580157] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  393.580159]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  393.580167] ata3.00: status: { DRDY ERR }
[  393.580178] ata3: hard resetting link
[  394.068026] ata3: softreset failed (device not ready)
[  394.068035] ata3: applying SB600 PMP SRST workaround and retrying
[  394.228053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  394.241568] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  394.255969] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  394.255976] ata3.00: configured for PIO0
[  394.256545] ata3: EH complete
[  399.564350] ata3.00: qc timeout (cmd 0xa0)
[  399.564382] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  399.564391] ata3.00: irq_stat 0x40000001
[  399.564398] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  399.564424] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  399.564427]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  399.564433] ata3.00: status: { DRDY ERR }
[  399.564444] ata3: hard resetting link
[  400.048028] ata3: softreset failed (device not ready)
[  400.048037] ata3: applying SB600 PMP SRST workaround and retrying
[  400.212052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  400.225594] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  400.239992] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  400.239999] ata3.00: configured for PIO0
[  400.240566] ata3: EH complete
[  406.148047] ata3.00: qc timeout (cmd 0xa0)
[  406.148080] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  406.148088] ata3.00: irq_stat 0x40000001
[  406.148095] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  406.148120] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  406.148123]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  406.148130] ata3.00: status: { DRDY ERR }
[  406.148142] ata3: hard resetting link
[  406.632055] ata3: softreset failed (device not ready)
[  406.632066] ata3: applying SB600 PMP SRST workaround and retrying
[  406.796056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  406.809552] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  406.823952] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  406.823960] ata3.00: configured for PIO0
[  406.824526] ata3: EH complete
[  423.012042] ata3.00: qc timeout (cmd 0xa0)
[  423.012072] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  423.012080] ata3.00: irq_stat 0x40000001
[  423.012087] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  423.012112] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  423.012114]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  423.012122] ata3.00: status: { DRDY ERR }
[  423.012134] ata3: hard resetting link
[  423.496052] ata3: softreset failed (device not ready)
[  423.496062] ata3: applying SB600 PMP SRST workaround and retrying
[  423.660085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  423.673635] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  423.688049] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  423.688056] ata3.00: configured for PIO0
[  423.688607] ata3: EH complete
[  433.596047] ata3.00: qc timeout (cmd 0xa0)
[  433.596078] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  433.596085] ata3.00: irq_stat 0x40000001
[  433.596093] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  433.596117] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  433.596119]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  433.596126] ata3.00: status: { DRDY ERR }
[  433.596139] ata3: hard resetting link
[  434.084049] ata3: softreset failed (device not ready)
[  434.084059] ata3: applying SB600 PMP SRST workaround and retrying
[  434.248050] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  434.261526] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  434.275934] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  434.275941] ata3.00: configured for PIO0
[  434.276497] ata3: EH complete
[  440.116042] ata3.00: qc timeout (cmd 0xa0)
[  440.116072] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  440.116080] ata3.00: irq_stat 0x40000001
[  440.116086] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  440.116111] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  440.116114]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  440.116121] ata3.00: status: { DRDY ERR }
[  440.116131] ata3: hard resetting link
[  440.600061] ata3: softreset failed (device not ready)
[  440.600072] ata3: applying SB600 PMP SRST workaround and retrying
[  440.764067] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  440.777562] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  440.791960] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  440.791966] ata3.00: configured for PIO0
[  440.792532] ata3: EH complete
[  451.148049] ata3.00: qc timeout (cmd 0xa0)
[  451.148084] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  451.148093] ata3.00: irq_stat 0x40000001
[  451.148101] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  451.148126] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  451.148129]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  451.148136] ata3.00: status: { DRDY ERR }
[  451.148148] ata3: hard resetting link
[  451.632035] ata3: softreset failed (device not ready)
[  451.632046] ata3: applying SB600 PMP SRST workaround and retrying
[  451.796056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  451.809560] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  451.823957] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[  451.823964] ata3.00: configured for PIO0
[  451.824532] ata3: EH complete

was ist das Problem?

Die Meldung kommt aber nicht, wenn du "nur umschaltest" oder ?

Du hast Probleme mit deiner Platte.

Vielleicht hilft dir das weiter:

http://forums.gentoo.org/viewtopic-t-815278-start-0.html

Hi, also ich habe folgendes festgestellt:

Diese Meldungen kommen nur wenn ich das Standard Ubuntu installiert habe, bei der Server Edition, openSUSE, und Debian erhalte ich keine Kernel-Fehlermeldungen.

"bei der Server Edition, openSUSE, und Debian erhalte ich keine Kernel-Fehlermeldungen."

Ja, was hast du denn da gemacht? Hast du diese Betriebssysteme auf der gleichen Platte installiert, mit der du die Fehlermeldung bekommen hast? Wurde die Partition dabei neu mit einem Filesystem formatiert? Womöglich funktioniert es wieder, wenn du auch die Ursprungsversion neu installierst? In dem Beitrag unter dem Link meinte ja auch einer, es hätte am vermurksten ext3 gelegen.

Ansonsten bleibt dir womoöglich nichts übrig, wie weiter zu googeln und nach einem Bug-Report bzw. Lösungsansatz u suchen: Entweder es gibt irgendwo ein Update zu irgednwas oder du hast Pech.

nein, ich habe nur 2 systeme auf der festplatte.

sda = 650 GB sda1 = 100 MB Windows 7 Bootpartition sda2 = 250 GB Windows 7 Home Premium sda3 = 4 GB swap sda4 = 80 GB ext4 Ubuntu sda5 = noch frei

Bootmanager Grub2 auf sda (MBR)

nein, ich habe nur 2 systeme auf der festplatte.

sda = 650 GB
sda1 = 100 MB Windows 7 Bootpartition 
sda2 = 250 GB Windows 7 Home Premium 
sda3 = 4 GB swap 
sda4 = 80 GB 
ext4 Ubuntu sda5 = noch frei

Bootmanager Grub2 auf sda (MBR)

Das ist ein Fehler in den Southbridges SB600 und SB700! Ich hab den Fehler auch. Mit dem Kernel-Paramter

libata.force=norst

bekommt man die Fehlermeldungen weg. Dieser Parameter ist also in der Datei

/etc/default/grub

in der Zeile

GRUB_CMDLINE_LINUX=""

einzutragen (innerhalb der Anführungszeichen). Anschließend mit

sudo update-grub

das Grub-Bootmenü erneuern, damit die Änderungen auch angewendet werden.

So wie ich das verstehe, verhindert der Zusätzliche Dateieintrag schlicht das Resetten von ATA-Laufwerken. Gefunden habe ich den Tipp hier.

Zum eigentlichen Beheben des Fehlers muss man den Linux-Kernel von Hand kompilieren, mit der Option

CONFIG_SATA_PMP=n

wie hier und hier zu lesen ist. Für Ubuntu kommt das, denke ich, nicht in Frage, weil ja alle Nase lang neue Kernel per Update bereit gestellt werden.

Einen Bug-Report für RedHat gibt's hier. Für RedHat ist auch ein Kernel-Patch veröffentlich worden, der seinen Weg offenbar bis heute nicht in den Ubuntu-Kernel geschafft hat. Der Patch erkennt den Southbridge-Fehler und behebt ihn mit einem Workaround.