staging.inyokaproject.org

Seit ich auf 20.04 aufgerüstet habe gibt es mit Samba Probleme.

Auf meinem Windows 10 Rechner werden die Freigaben nicht korrekt dargestellt.Zb. (Die_härtesten_Gefängnisse_der_Welt). Auf einem Linux Client gibt es keine Probleme mit der Darsellung).

Auch beim hin und herkopieren stimmt was nicht.

Vom Sambaserver auf den Win PC 78.000 kbytes/s Vom Win PC auf den Sambaserver nur 15.000 kbytes/s.

Das war mit 18.04 nicht so,da war alles korrekt.

Wie bekomme ich das wieder hin?

Offensichtlich wurde etwas bei der smb.conf Standardeinstellung zwischen 18.04 und 20.04 geändert.

1

testparm -vs

liefert die Defaults.

Evtl. reicht es ja schon, in 20.04 folgende Parameter in der globalen Sektion der smb.conf zu hinterlegen (je nachdem, wie der Unterschied zu den Defaults ist):

dos charset = cp866
unix charset = UTF8
display charset = UTF8

Hallo chr123

Hat leider nichts gebracht "Motörhead"

Da es vorher ja funktioniert hat, kann es ja eigentlich nur an der smb.conf liegen. Was ergibt denn

testparm -vs

bei dir?

Hier testparm -vs

usr/[global]
        abort shutdown script =
        add group script =
        additional dns hostnames =
        add machine script =
        addport command =
        addprinter command =
        add share command =
        add user script =
        add user to group script =
        afs token lifetime = 604800
        afs username map =
        aio max threads = 100
        algorithmic rid base = 1000
        allow dcerpc auth level connect = No
        allow dns updates = secure only
        allow insecure wide links = No
        allow nt4 crypto = No
        allow trusted domains = Yes
        allow unsafe cluster upgrade = No
        apply group policies = No
        async smb echo handler = No
        auth event notification = No
        auto services =
        binddns dir = /var/lib/samba/bind-dns
        bind interfaces only = No
        browse list = Yes
        cache directory = /var/cache/samba
        change notify = Yes
        change share command =
        check password script =
        cldap port = 389
        client ipc max protocol = default
        client ipc min protocol = default
        client ipc signing = default
        client lanman auth = No
        client ldap sasl wrapping = sign
        client max protocol = default
        client min protocol = SMB2_02
        client NTLMv2 auth = Yes
        client plaintext auth = No
        client schannel = Yes
        client signing = default
        client use spnego principal = No
        client use spnego = Yes
        cluster addresses =
        clustering = No
        config backend = file
        config file =
        create krb5 conf = Yes
        ctdbd socket =
        ctdb locktime warn threshold = 0
        ctdb timeout = 0
        cups connection timeout = 30
        cups encrypt = No
        cups server =
        dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr, netlogon, lsarpc, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey, dnsserver
        deadtime = 10080
        debug class = No
        debug encryption = No
        debug hires timestamp = Yes
        debug pid = No
        debug prefix timestamp = No
        debug uid = No
        dedicated keytab file =
        default service =
        defer sharing violations = Yes
        delete group script =
        deleteprinter command =
        delete share command =
        delete user from group script =
        delete user script =
        dgram port = 138
        disable netbios = No
        disable spoolss = No
        dns forwarder =
        dns proxy = No
        dns update command = /usr/sbin/samba_dnsupdate
        dns zone scavenging = No
        domain logons = No
        domain master = Auto
        dos charset = cp866
        dsdb event notification = No
        dsdb group change notification = No
        dsdb password event notification = No
        enable asu support = No
        enable core files = Yes
        enable privileges = Yes
        encrypt passwords = Yes
        enhanced browsing = Yes
        enumports command =
        eventlog list =
        get quota command =
        getwd cache = Yes
        gpo update command = /usr/sbin/samba-gpupdate
        guest account = nobody
        homedir map = auto.home
        host msdfs = Yes
        hostname lookups = No
        idmap backend = tdb
        idmap cache time = 604800
        idmap gid =
        idmap negative cache time = 120
        idmap uid =
        include system krb5 conf = Yes
        init logon delay = 100
        init logon delayed hosts =
        interfaces =
        iprint server =
        keepalive = 300
        kerberos encryption types = all
        kerberos method = default
        kernel change notify = Yes
        kpasswd port = 464
        krb5 port = 88
        lanman auth = No
        large readwrite = Yes
        ldap admin dn =
        ldap connection timeout = 2
        ldap debug level = 0
        ldap debug threshold = 10
        ldap delete dn = No
        ldap deref = auto
        ldap follow referral = Auto
        ldap group suffix =
        ldap idmap suffix =
        ldap machine suffix =
        ldap max anonymous request size = 256000
        ldap max authenticated request size = 16777216
        ldap max search request size = 256000
        ldap page size = 1000
        ldap passwd sync = no
        ldap replication sleep = 1000
        ldap server require strong auth = Yes
        ldap ssl = start tls
        ldap ssl ads = No
        ldap suffix =
        ldap timeout = 15
        ldap user suffix =
        lm announce = Auto
        lm interval = 60
        load printers = Yes
        local master = Yes
        lock directory = /run/samba
        lock spin time = 200
        log file = /var/log/samba/log.%m
        logging =
        log level = 1
        log nt token command =
        logon drive =
        logon home = \\%N\%U
        logon path = \\%N\%U\profile
        logon script =
        log writeable files on exit = No
        lpq cache time = 30
        lsa over netlogon = No
        machine password timeout = 604800
        mangle prefix = 1
        mangling method = hash2
        map to guest = Bad User
        max disk size = 0
        max log size = 1000
        max mux = 50
        max open files = 16384
        max smbd processes = 0
        max stat cache size = 512
        max ttl = 259200
        max wins ttl = 518400
        max xmit = 16644
        mdns name = netbios
        message command =
        min receivefile size = 0
        min wins ttl = 21600
        mit kdc command =
        multicast dns register = Yes
        name cache timeout = 660
        name resolve order = lmhosts wins host bcast
        nbt client socket address = 0.0.0.0
        nbt port = 137
        ncalrpc dir = /var/run/samba/ncalrpc
        netbios aliases =
        netbios name = HP-SERVER
        netbios scope =
        neutralize nt4 emulation = No
        NIS homedir = No
        nmbd bind explicit broadcast = Yes
        nsupdate command = /usr/bin/nsupdate -g
        ntlm auth = ntlmv2-only
        nt pipe support = Yes
        ntp signd socket directory = /var/lib/samba/ntp_signd
        nt status support = Yes
        null passwords = No
        obey pam restrictions = Yes
        old password allowed period = 60
        oplock break wait time = 0
        os2 driver map =
        os level = 20
        pam password change = Yes
        panic action = /usr/share/samba/panic-action %d
        passdb backend = tdbsam
        passdb expand explicit = No
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
        passwd chat debug = No
        passwd chat timeout = 2
        passwd program = /usr/bin/passwd %u
        password hash gpg key ids =
        password hash userPassword schemes =
        password server = *
        perfcount module =
        pid directory = /run/samba
        preferred master = Auto
        prefork backoff increment = 10
        prefork children = 4
        prefork maximum backoff = 120
        preload modules =
        printcap cache time = 750
        printcap name =
        private dir = /var/lib/samba/private
        raw NTLMv2 auth = No
        read raw = Yes
        realm =
        registry shares = No
        reject md5 clients = No
        reject md5 servers = No
        remote announce =
        remote browse sync =
        rename user script =
        require strong key = Yes
        reset on zero vc = No
        restrict anonymous = 0
        rndc command = /usr/sbin/rndc
        root directory =
        rpc big endian = No
        rpc server dynamic port range = 49152-65535
        rpc server port = 0
        samba kcc command = /usr/sbin/samba_kcc
        security = AUTO
        server max protocol = SMB3
        server min protocol = SMB2_02
        server multi channel support = No
        server role = standalone server
        server schannel = Yes
        server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd, ntp_signd, kcc, dnsupdate, dns
        server signing = default
        server string = Samba 4.11.6-Ubuntu
        set primary group script =
        set quota command =
        share backend = classic
        show add printer wizard = Yes
        shutdown script =
        smb2 leases = Yes
        smb2 max credits = 8192
        smb2 max read = 8388608
        smb2 max trans = 8388608
        smb2 max write = 8388608
        smbd profiling level = off
        smb passwd file = /etc/samba/smbpasswd
        smb ports = 445 139
        socket options = TCP_NODELAY
        spn update command = /usr/sbin/samba_spnupdate
        stat cache = Yes
        state directory = /var/lib/samba
        svcctl list =
        syslog = 0
        syslog only = No
        template homedir = /home/%D/%U
        template shell = /bin/false
        time server = No
        timestamp logs = Yes
        tls cafile = tls/ca.pem
        tls certfile = tls/cert.pem
        tls crlfile =
        tls dh params file =
        tls enabled = Yes
        tls keyfile = tls/key.pem
        tls priority = NORMAL:-VERS-SSL3.0
        tls verify peer = as_strict_as_possible
        unicode = Yes
        unix charset = UTF8
        unix extensions = Yes
        unix password sync = Yes
        use mmap = Yes
        username level = 0
        username map =
        username map cache time = 0
        username map script =
        usershare allow guests = Yes
        usershare max shares = 100
        usershare owner only = Yes
        usershare path = /var/lib/samba/usershares
        usershare prefix allow list =
        usershare prefix deny list =
        usershare template share =
        utmp = No
        utmp directory =
        winbind cache time = 300
        winbindd socket directory = /var/run/samba/winbindd
        winbind enum groups = No
        winbind enum users = No
        winbind expand groups = 0
        winbind max clients = 200
        winbind max domain connections = 1
        winbind nested groups = Yes
        winbind normalize names = No
        winbind nss info = template
        winbind offline logon = No
        winbind reconnect delay = 30
        winbind refresh tickets = No
        winbind request timeout = 60
        winbind rpc only = No
        winbind scan trusted domains = Yes
        winbind sealed pipes = Yes
        winbind separator = \
        winbind use default domain = No
        winbind use krb5 enterprise principals = No
        wins hook =
        wins proxy = No
        wins server =
        wins support = No
        workgroup = NETZWERKSPEZIAL
        write raw = Yes
        wtmp directory =
        idmap config * : backend = tdb
        access based share enum = No
        acl allow execute always = No
        acl check permissions = Yes
        acl group control = No
        acl map full control = Yes
        administrative share = No
        admin users =
        afs share = No
        aio read size = 1
        aio write behind =
        aio write size = 1
        allocation roundup size = 0
        available = Yes
        blocking locks = Yes
        block size = 1024
        browseable = Yes
        case sensitive = Auto
        check parent directory delete on close = No
        comment =
        copy =
        create mask = 0744
        csc policy = manual
        cups options =
        default case = lower
        default devmode = Yes
        delete readonly = No
        delete veto files = No
        dfree cache time = 0
        dfree command =
        directory mask = 0755
        directory name cache size = 100
        dmapi support = No
        dont descend =
        dos filemode = No
        dos filetime resolution = No
        dos filetimes = Yes
        durable handles = Yes
        ea support = Yes
        fake directory create times = No
        fake oplocks = No
        follow symlinks = Yes
        force create mode = 0000
        force directory mode = 0000
        force group =
        force printername = No
        force unknown acl user = No
        force user =
        fstype = NTFS
        guest ok = No
        guest only = No
        hide dot files = Yes
        hide files =
        hide new files timeout = 0
        hide special files = No
        hide unreadable = No
        hide unwriteable files = No
        hosts allow =
        hosts deny =
        include =
        inherit acls = No
        inherit owner = no
        inherit permissions = No
        invalid users =
        kernel oplocks = No
        kernel share modes = Yes
        level2 oplocks = Yes
        locking = Yes
        lppause command =
        lpq command = %p
        lpresume command =
        lprm command =
        magic output =
        magic script =
        mangled names = illegal
        mangling char = ~
        map acl inherit = No
        map archive = Yes
        map hidden = No
        map readonly = no
        map system = No
        max connections = 0
        max print jobs = 1000
        max reported print jobs = 0
        min print space = 0
        msdfs proxy =
        msdfs root = No
        msdfs shuffle referrals = No
        nt acl support = Yes
        ntvfs handler = unixuid, default
        oplocks = Yes
        path =
        posix locking = Yes
        postexec =
        preexec =
        preexec close = No
        preserve case = Yes
        printable = No
        print command =
        printer name =
        printing = cups
        printjob username = %U
        print notify backchannel = No
        queuepause command =
        queueresume command =
        read list =
        read only = Yes
        root postexec =
        root preexec =
        root preexec close = No
        short preserve case = Yes
        smbd async dosmode = No
        smbd getinfo ask sharemode = Yes
        smbd max async dosmode = 0
        smbd search ask sharemode = Yes
        smb encrypt = default
        spotlight = No
        store dos attributes = Yes
        strict allocate = No
        strict locking = Auto
        strict rename = No
        strict sync = Yes
        sync always = No
        use client driver = No
        use sendfile = No
        valid users =
        veto files =
        veto oplock files =
        vfs objects =
        volume =
        wide links = No
        write cache size = 0
        write list =
        
        
        [homes]
        browseable = No
        comment = Home Directories
        create mask = 0700
        directory mask = 0700
        valid users = %S


[printers]
        browseable = No
        comment = All Printers
        create mask = 0700
        path = /var/spool/samba
        printable = Yes


[print$]
        comment = Printer Drivers
        path = /var/lib/samba/printers


[Musik]
        comment = HP Server
        directory mask = 0775
        force group = audio
        force user = laurent
        guest ok = Yes
        path = /mnt/media1/Musik/
        read only = No


[Bilder]
        comment = HP Server
        force group = plex
        force user = plex
        guest ok = Yes
        path = /mnt/media1/Bilder/
        read only = No


[Fernsehaufnahmen]
        comment = Vdr-Aufnahmen
        create mask = 0664
        directory mask = 0775
        force group = vdr
        force user = vdr
        guest ok = Yes
        path = /mnt/media1/Fernsehaufnahmen
        read only = No


[Sicherungsplatte]
        comment = Backupplatte
        create mask = 0660
        directory mask = 0770
        force group = root
        force user = root
        guest ok = Yes
        path = /mnt/Backup4t/
        read only = No


[sonstiges]
        comment = HP Server
        guest ok = Yes
        path = /mnt/media1/sonstiges
        read only = No


[media2]
        comment = HP Server
        directory mask = 0777
        force group = plex
        force user = plex
        guest ok = Yes
        path = /mnt/media2
        read only = No


[media3]
        comment = HP Server
        directory mask = 0777
        force group = plex
        force user = plex
        guest ok = Yes
        path = /mnt/media3
        read only = No


[media4]
        comment = HP Server
        directory mask = 0777
        force group = plex
        force user = plex
        guest ok = Yes
        path = /mnt/media4
        read only = No


[kodi]
        comment = HP Server
        force group = vdr
        force user = vdr
        guest ok = Yes
        path = /home/vdr/kodi
        read only = No


[vbox-isos]
        comment = virtualbox iso files
        create mask = 0660
        directory mask = 0770
        force group = vboxusers
        force user = vbox
        guest ok = Yes
        path = /mnt/media1/vbox-isos
        read only = No


[FirefoxProfil]
        comment = HP Server
        guest ok = Yes
        path = /home/laurent/Mozilla/Firefox/Profil
        read only = No


[ThunderbirdProfil]
        comment = HP Server
        guest ok = Yes
        path = /home/laurent/Mozilla/Thunderbird/Profil
        read only = No


[Elster]
        comment = HP Server
        guest ok = Yes
        path = /home/laurent/Elster
        read only = No


[jdownloader]
        comment = Jdownloader
        create mask = 0777
        directory mask = 0777
        force user = root
        guest ok = Yes
        path = /mnt/media4/Downloads
        read only = No


[shared folder]
        comment = Gemeinsamer Ordner für vms
        create mask = 0777
        directory mask = 0777
        force user = root
        guest ok = Yes
        path = /mnt/media1/Shared folder
        read only = No

        

Ok, probier mal:

dos charset = cp1252

Falls das nicht geht, könntest du mal folgendes testen: Auf dem Server eine beliebige Datei, die derzeit falsch in Windows angezeigt, konvertieren:

convmv -f iso-8859-15 -t utf-8 /pfad/zur/datei

siehe hier. Anschließend auf dem Windows Client schauen, ob der Fehler noch auftritt? Evtl. wäre ja das die Lösung.

chr123 schrieb:

[…]

dos charset = cp866

Ist das ein Schreibfehler? CP866 ist eine Zeichensatztabelle für slawische Sprachen, deren Verwendung im deutschsprachigem Raum doch eher nicht nahe liegt.

Ein Schreibfehler war es nicht (Quelle) - da habe ich mich wohl etwas vom Gebrauch der deutschen Sprache in die Irre führen lassen. Mal sehen, ob die Umstellung auf cp1252 etwas bringt.

Hat leider nichts gebracht.

root@hp-server:/mnt/media1/Musik# convmv -f iso-8859-15 -t utf-8 "Mötley Crüe"
Starting a dry run without changes...
Skipping, already UTF-8: ./Mötley Crüe

Wenn ich den Dateinamen angebe wie Windows mir anzeigt wird nichts kodiert

root@hp-server:/mnt/media1/Musik# convmv --notest iso-8859-15 -t utf-8 "Mötley Crüe"
wrong/unknown "from" encoding!

Wenn ich die Dateien mit Winscp über ssh anschaue wird alles korrekt angezeigt.

Dann scheint das ein Problem mit Windows 10 zu sein. Schau doch mal in den Regionseinstellungen, ob utf aktiv ist („Beta: Unicode UTF-8 für die Unterstützung weltweiter Sprachen verwenden", siehe hier.

Ich komme mit dieser Anleitung mit meinem Win 10 nicht klar.Ich finde keinen Schalter wo man sieht ob utf aktiv ist.

Region → Reiter: Verwaltung → Gebietsschema ändern → UTF-8.

Evtl. ist bei dir auch ein anderes Gebietsschema anstelle von Deutsch eingestellt.

Habe den Haken "Beta: verwenden Unicode UTF8 für weltweite Unterstützung" gesetzt. Nach einem Neustart wird jetzt alles korrekt wiedergegeben.

Danke für deine Unterstützung.

Zu Früh gefreut.Die Zeichen vom Samba Server werden zwar korrekt dargestellt,aber einige Programme funktionieren nicht mehr wie sie sollen. Bsp. Putty Starter.Da werden einige Zeichen als Hyroglyphen dargestellt.Das wäre erstmal nicht so schlimm. Da Problem ist die Passwortübergabe funktioniert nicht mehr.Kann mich nicht mehr in ssh einlocken.Wrong Wrong passphrase. Den Haken aus "Beta: verwenden Unicode UTF8 für weltweite Unterstützung" entfernt,neugestartet.Putty Starter funktioniert wieder.Was mache ich jetzt?

Brauchst du Putty für deinen Anwendungsfall? Windows 10 hat einen eigenen SSH-Client, SSH-Agent usw. Ansonsten musst du Putty vermutlich auch auf UTF-8 trimmen.