staging.inyokaproject.org

Traktor Audio 6 - nicht regulierbares Inputsignal

Status: Ungelöst | Ubuntu-Version: Ubuntu 16.04 (Xenial Xerus)
Antworten |

ben178

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Hi!

Ich habe eine Native Instruments Traktor Audio 6 Soundcard hier.

Ich habe die an einen Laptop mit Ubuntu 14.04 (ich weiß uralt, ich kann's hier im Forum im DropDown-Menü gar nicht mehr auswählen...) angeschlossen, um das RecOut-Signal von einem Mischpult zu streamen - ein bisschen Vinyl-Radio für Freund*innen, über einen Icecast-Server.

Ich bekomme inzwischen sowohl ein Output- also auch ein Input-Signal, Input allerdings mit sehr niedrigem Pegel.

Ich habe diese beiden Threads gefunden:

https://forum.ubuntuusers.de/topic/traktor-audio-6-erkannt-aber-nicht-anwaehlbar/

und

https://forum.ubuntuusers.de/topic/ni-traktor-audio-6-erkannt-aber-nicht-in-klang/

Leider bin ich nicht so versiert, dass ich die dort beschriebenen Schritte ohne Unterstützung nachvollziehen könnte (bzw, aus dem Output der Konsole schlau werden würde). Der folgende Post aus dem ersten Thread hat mir einen Schritt weitergeholfen, jetzt taucht die Traktor Audio 6 in Systemeinstellungen und pavucontrols bei den Outputs auf:

Kellerkind_2009 schrieb:

}}} Mal so zum Testen

gksudo gedit /lib/udev/rules.d/90-pulseaudio.rules

dort dann den Eintrag ändern von

ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1011", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"

in

ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1010", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"

Dann mal abstöpseln und wieder Anklemmen und Testen.

Das ist schon mal super. Zwar ohne Stereo Modus (wie ich sie nutze), und stattdessen mit verschiedenen Surround Modi zur Auswahl, aber sie taucht auf und gibt ein Signal aus.

Mein eigentliches Ziel ist, ein gutes Eingangssignal zu bekommen - und unter "Input" wird sie nicht angezeigt, weder in den Systemeinstellungen noch in pavucontrols. Im Alsamixer wird die Karte angezeigt, allerdings ohne Möglichkeit Pegel einzustellen, und bei Inputs/Capture ist auch Alsamixer der Meinung "This sound device does not have any capture controls."

Trotzdem kann ich sowohl bei Audacity als auch bei Butt (http://danielnoethen.de/butt/) die Karte als Quelle auswählen. (Kann mir wer erklären, warum? Ich dachte, die greifen ebenfalls über ALSA auf verfügbare Soundkarten zu?)

In beiden Anwendungen bekomme ich ein Signal, allerdings mit sehr, sehr niedrigem Pegel. Butt gibt mir die Möglichkeit, das Signal für einen Stream nachträglich um bis zu 24db anzuheben. Nicht ideal, aber es funktioniert zumindest. Damit bei Audacity, wo ich diese Möglichkeit nicht habe, genug ankommt, müsste ich die Regler am Mischpult maximal aufreißen, so dass das Signal übersteuert.

Falls mir hier wer weiterhelfen kann, wie ich das Eingangssignal direkt an der Traktor Audio 6 einstellen kann, würde ich mich freuen ☺

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Moin,

mal ganz blöde gefragt – hast du im pavucontrol unter "Eingabegeräte" auch unten >Alle Eingabegeräte< angewählt? Siehe Screenshot.

Anhang

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Hallo,

Danke für die Antwort!

Keine blöde Frage, ich fühle mich von solchen Fragen nicht auf den Schlips getreten. Dazu ist viel zu leicht so etwas zu übersehen, erst recht mit wenig Erfahrung damit. Ich bin dankbar für solche Hinweise.

Tatsächlich war mir das nicht aufgefallen. Wenn ich >Alle Eingabegeräte< auswähle, taucht "Monitor of Traktor Audio 6 Surround Analog 4.1" auf, samt fünf Reglern. Diese standen bei 100%, bis 153% sind möglich. Am Signal, das bei Audacity und Butt ankommt, ändern sie nichts.

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Wenn ich am PC Sound abspiele, schlägt die Pegelanzeige für den "Monitor of Traktor Audio 6 Surround Analog 4.1" aus.

Wenn ich ein Signal von der externen Audioquelle an den Eingang lege (das ich dann wie gesagt mit sehr niedrigem Pegel bei Audacity oder Butt erkennen kann), bleibt die Pegelanzeige für den "Monitor of Traktor Audio 6 Surround Analog 4.1" im pavucontrol inaktiv.

In pavucontrol im Configuration-Reiter bekomme ich neben >Built-In Audio< auch >Traktor Audio 6< angezeigt. Dort kann ich folgende Profiles auswählen: Analog Surround 5.1 Output, Analog Surround 4.1 Output, Analog Surround 5.0 Output, Off.

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Mal sehen was Pulse so erkennt ☺ Stelle die Situation so her wie gewünscht,dann zeige

pacmd info

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Das spuckt die Konsole aus, wenn Butt läuft und aufzeichnet:

Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 22, size: 178,0 KiB.
Memory blocks allocated during the whole lifetime: 40535, size: 128,0 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 18 allocated/15122 accumulated.
Memory blocks of type POOL_EXTERNAL: 4 allocated/16553 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/25413 accumulated.
Memory blocks of type IMPORTED: 0 allocated/0 accumulated.
25 module(s) loaded.
    index: 0
	name: <module-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "4.0"
    index: 1
	name: <module-stream-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "4.0"
    index: 2
	name: <module-card-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "4.0"
    index: 3
	name: <module-augment-properties>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "4.0"
    index: 4
	name: <module-switch-on-port-available>
	argument: <>
	used: -1
	load once: no
	properties:
		
    index: 5
	name: <module-alsa-card>
	argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 3
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "4.0"
    index: 6
	name: <module-alsa-card>
	argument: <device_id="1" name="usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6" card_name="alsa_card.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 2
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "4.0"
    index: 7
	name: <module-udev-detect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "4.0"
    index: 8
	name: <module-bluetooth-policy>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Frédéric Dalleau"
		module.description = "When a bluetooth sink or source is added, load module-loopback"
		module.version = "4.0"
    index: 9
	name: <module-bluetooth-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Joao Paulo Rechi Vita"
		module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
		module.version = "4.0"
    index: 10
	name: <module-native-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "4.0"
    index: 11
	name: <module-default-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "4.0"
    index: 12
	name: <module-rescue-streams>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
		module.version = "4.0"
    index: 13
	name: <module-always-sink>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.version = "4.0"
    index: 14
	name: <module-intended-roles>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based of intended roles of devices"
		module.version = "4.0"
    index: 15
	name: <module-suspend-on-idle>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "4.0"
    index: 16
	name: <module-systemd-login>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "4.0"
    index: 17
	name: <module-position-event-sounds>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "4.0"
    index: 18
	name: <module-filter-heuristics>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "4.0"
    index: 19
	name: <module-filter-apply>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "4.0"
    index: 20
	name: <module-x11-publish>
	argument: <display=:0>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "4.0"
    index: 21
	name: <module-x11-bell>
	argument: <display=:0 sample=bell.ogg>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 bell interceptor"
		module.version = "4.0"
    index: 22
	name: <module-x11-cork-request>
	argument: <display=:0>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "4.0"
    index: 23
	name: <module-x11-xsmp>
	argument: <display=:0 session_manager=local/benja:@/tmp/.ICE-unix/2107,unix/benja:/tmp/.ICE-unix/2107>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "4.0"
    index: 24
	name: <module-cli-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Command line interface protocol (UNIX sockets)"
		module.version = "4.0"
2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: 
	priority: 9959
	volume: 0:  58% 1:  58%
	        0: -14,00 dB 1: -14,00 dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: no
	current latency: 16,95 ms
	max request: 3 KiB
	max rewind: 64 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 20,00 ms; range is 0,50 .. 371,52 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 5
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20585 Analog"
		alsa.id = "CX20585 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Intel IbexPeak HDMI"
		alsa.components = "HDA:14f15069,104313f3,00100302 HDA:80862804,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
    index: 1
	name: <alsa_output.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6.analog-surround-41>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: 
	priority: 9049
	volume: 0:  64% 1:  64% 2:  64% 3:  64% 4:   0%
	        0: -11,63 dB 1: -11,63 dB 2: -11,63 dB 3: -11,63 dB 4: -inf dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: no
	current latency: 20,75 ms
	max request: 17 KiB
	max rewind: 853 KiB
	monitor source: 2
	sample spec: s32le 5ch 44100Hz
	channel map: front-left,front-right,rear-left,rear-right,lfe
	             Surround 4.1
	used by: 0
	linked by: 1
	configured latency: 20,00 ms; range is 1,00 .. 990,70 ms
	card: 1 <alsa_card.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6>
	module: 6
	properties:
		alsa.resolution_bits = "32"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "Traktor Audio 6"
		alsa.long_card_name = "Native Instruments Traktor Audio 6 at usb-0000:00:1d.0-1.2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/sound/card1"
		udev.id = "usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6"
		device.bus = "usb"
		device.vendor.id = "17cc"
		device.vendor.name = "Native Instruments"
		device.product.id = "1011"
		device.product.name = "Traktor Audio 6"
		device.serial = "Native_Instruments_Traktor_Audio_6_2EF8ED48"
		device.string = "surround41:1"
		device.buffering.buffer_size = "873800"
		device.buffering.fragment_size = "436900"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-surround-41"
		device.profile.description = "Analog Surround 4.1"
		device.description = "Traktor Audio 6 Analog Surround 4.1"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB17cc:1011"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>
3 source(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 1950
	volume: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 64 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 20,00 ms; range is 0,50 .. 371,52 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 5
	properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
  * index: 1
	name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9959
	volume: 0:  79% 1:  79%
	        0: -6,00 dB 1: -6,00 dB
	        balance 0,00
	base volume:  79%
	             -6,00 dB
	volume steps: 65537
	muted: yes
	current latency: 0,27 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 20,00 ms; range is 0,50 .. 341,33 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 5
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20585 Analog"
		alsa.id = "CX20585 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Intel IbexPeak HDMI"
		alsa.components = "HDA:14f15069,104313f3,00100302 HDA:80862804,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-input-microphone-internal: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-microphone: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input>
    index: 2
	name: <alsa_output.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6.analog-surround-41.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 1040
	volume: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100%
	        0: 0,00 dB 1: 0,00 dB 2: 0,00 dB 3: 0,00 dB 4: 0,00 dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 853 KiB
	sample spec: s32le 5ch 44100Hz
	channel map: front-left,front-right,rear-left,rear-right,lfe
	             Surround 4.1
	used by: 1
	linked by: 1
	configured latency: 20,00 ms; range is 1,00 .. 990,70 ms
	monitor_of: 1
	card: 1 <alsa_card.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6>
	module: 6
	properties:
		device.description = "Monitor of Traktor Audio 6 Analog Surround 4.1"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "Traktor Audio 6"
		alsa.long_card_name = "Native Instruments Traktor Audio 6 at usb-0000:00:1d.0-1.2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/sound/card1"
		udev.id = "usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6"
		device.bus = "usb"
		device.vendor.id = "17cc"
		device.vendor.name = "Native Instruments"
		device.product.id = "1011"
		device.product.name = "Traktor Audio 6"
		device.serial = "Native_Instruments_Traktor_Audio_6_2EF8ED48"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
6 client(s) logged in.
    index: 0
	driver: <module-systemd-login.c>
	owner module: 16
	properties:
		application.name = "Login Session c2"
		systemd-login.session = "c2"
    index: 1
	driver: <protocol-native.c>
	owner module: 10
	properties:
		application.name = "GNOME Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "1.0"
		application.process.id = "2096"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "unity-settings-daemon"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
    index: 7
	driver: <module-x11-xsmp.c>
	owner module: 23
	properties:
		application.name = "XSMP Session on gnome-session as 10ac28dce3afc76afc158583701542703100000021070044"
		xsmp.vendor = "gnome-session"
		xsmp.client.id = "10ac28dce3afc76afc158583701542703100000021070044"
    index: 8
	driver: <protocol-native.c>
	owner module: 10
	properties:
		application.name = "Ubuntu Audio Settings"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "com.canonical.settings.sound"
		application.icon_name = "multimedia-volume-control"
		application.version = "0.1"
		application.process.id = "2304"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "indicator-sound-service"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
    index: 32
	driver: <protocol-native.c>
	owner module: 10
	properties:
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2973"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
    index: 33
	driver: <cli.c>
	owner module: 24
	properties:
		application.name = "UNIX socket client"
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 5
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5460, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 360, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-microphone-internal: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-microphone: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "Traktor Audio 6"
		alsa.long_card_name = "Native Instruments Traktor Audio 6 at usb-0000:00:1d.0-1.2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/sound/card1"
		udev.id = "usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6"
		device.bus = "usb"
		device.vendor.id = "17cc"
		device.vendor.name = "Native Instruments"
		device.product.id = "1011"
		device.product.name = "Traktor Audio 6"
		device.serial = "Native_Instruments_Traktor_Audio_6_2EF8ED48"
		device.string = "1"
		device.description = "Traktor Audio 6"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	profiles:
		output:analog-surround-41: Analog Surround 4.1 Output (priority 800, available: unknown)
		output:analog-surround-50: Analog Surround 5.0 Output (priority 700, available: unknown)
		output:analog-surround-51: Analog Surround 5.1 Output (priority 800, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-surround-41>
	sinks:
		alsa_output.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6.analog-surround-41/#1: Traktor Audio 6 Analog Surround 4.1
	sources:
		alsa_output.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6.analog-surround-41.monitor/#2: Monitor of Traktor Audio 6 Analog Surround 4.1
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
0 sink input(s) available.
3 source outputs(s) available.
    index: 18
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
	volume: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	muted: no
	current latency: 15,85 ms
	requested latency: 20,00 ms
	sample spec: float32le 1ch 25Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 32 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2973"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 19
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
	volume: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	muted: no
	current latency: 0,00 ms
	requested latency: 20,00 ms
	sample spec: float32le 1ch 25Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 32 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2973"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 20
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 2 <alsa_output.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6.analog-surround-41.monitor>
	volume: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	muted: no
	current latency: 14,65 ms
	requested latency: 20,00 ms
	sample spec: float32le 1ch 25Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 32 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2973"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
0 cache entrie(s) available.

Da steht jetzt wieder an verschiedenen Stellen für die Traktor Audio 6

		device.product.id = "1011"

Und ein internes Mikro ist nicht mute? (nur der Monitor für's interne Mikro)

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Oh, und pavucontrol ist im Tab "Recording" der Meinung "No application is currently recording audio.", auch wenn Butt aufzeichnet.

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Also,siehe mal

0 sink input(s) available.

Das einzige was da als "Eingang" wahr genommen wird

index: 19
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
	volume: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	muted: no
	current latency: 0,00 ms
	requested latency: 20,00 ms
	sample spec: float32le 1ch 25Hz
	channel map: mono
	             Mono
	resample method: peaks

zeige mal

cat /lib/udev/rules.d/90-pulseaudio.rules

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

OK, ich les' nochmal was ich im Wiki zu sink und source finde um mir ein bisschen mehr Verständnis anzueignen. Anscheinend ist das gestern Nacht irgendwann nicht mehr hängengeblieben...

pulseaudio.rules:

# do not edit this file, it will be overwritten on update

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

SUBSYSTEM!="sound", GOTO="pulseaudio_end"
ACTION!="change", GOTO="pulseaudio_end"
KERNEL!="card*", GOTO="pulseaudio_end"
SUBSYSTEMS=="usb", GOTO="pulseaudio_check_usb"

SUBSYSTEMS=="platform", DRIVERS=="thinkpad_acpi", ENV{PULSE_IGNORE}="1"

# NVidia and Intel HDAs often have more than one HDMI codec/port on the same card
ATTRS{vendor}=="0x10de", ENV{PULSE_PROFILE_SET}="extra-hdmi.conf"
ATTRS{vendor}=="0x8086", ENV{PULSE_PROFILE_SET}="extra-hdmi.conf"

# Force enable speaker and internal mic for some laptops
# This should only be necessary for kernels 3.3, 3.4 and 3.5 (as they are lacking the phantom jack kctls).
# Acer AOA150
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x015b", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Acer Aspire 4810TZ
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x022a", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Packard bell dot m/a
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x028c", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Acer Aspire 1810TZ
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x029b", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Acer AOD260 and AO532h
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x0349", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell MXC051
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01b5", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Inspiron 6400 and E1505
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01bd", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Latitude D620
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01c2", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Latitude D820
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01cc", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Latitude D520
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01d4", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Latitude D420
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01d6", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Inspiron 1525
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x022f", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Inspiron 1011
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x02f4", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell XPS 14 (L401X)
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0468", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell XPS 15 (L501X)
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x046e", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell XPS 15 (L502X)
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x050e", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Inspiron 3420
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0553", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Inspiron 3520
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0555", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Vostro 2420
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0556", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Vostro 2520
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0558", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Inspiron One 2020
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0579", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Asus 904HA (1000H)
ATTRS{subsystem_vendor}=="0x1043", ATTRS{subsystem_device}=="0x831a", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Asus T101MT
ATTRS{subsystem_vendor}=="0x1043", ATTRS{subsystem_device}=="0x83ce", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Sony Vaio VGN-SR21M
ATTRS{subsystem_vendor}=="0x104d", ATTRS{subsystem_device}=="0x9033", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Sony Vaio VPC-W115XG
ATTRS{subsystem_vendor}=="0x104d", ATTRS{subsystem_device}=="0x9064", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Fujitsu Lifebook S7110
ATTRS{subsystem_vendor}=="0x10cf", ATTRS{subsystem_device}=="0x1397", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Fujitsu Lifebook A530
ATTRS{subsystem_vendor}=="0x10cf", ATTRS{subsystem_device}=="0x1531", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Toshiba A200
ATTRS{subsystem_vendor}=="0x1179", ATTRS{subsystem_device}=="0xff00", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# MSI X360
ATTRS{subsystem_vendor}=="0x1462", ATTRS{subsystem_device}=="0x1053", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Lenovo 3000 Y410
ATTRS{subsystem_vendor}=="0x17aa", ATTRS{subsystem_device}=="0x384e", ENV{PULSE_PROFILE_SET}="force-speaker.conf"

GOTO="pulseaudio_end"

LABEL="pulseaudio_check_usb"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{PULSE_PROFILE_SET}="native-instruments-audio8dj.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="0839", ENV{PULSE_PROFILE_SET}="native-instruments-audio4dj.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="baff", ENV{PULSE_PROFILE_SET}="native-instruments-traktorkontrol-s4.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="4711", ENV{PULSE_PROFILE_SET}="native-instruments-korecontroller.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="041d", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio2.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1010", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1021", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio10.conf"
ATTRS{idVendor}=="0763", ATTRS{idProduct}=="2012", ENV{PULSE_PROFILE_SET}="maudio-fasttrack-pro.conf"
ATTRS{idVendor}=="045e", ATTRS{idProduct}=="02bb", ENV{PULSE_PROFILE_SET}="kinect-audio.conf"

LABEL="pulseaudio_end"

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

😀 ist auch etwas Verwirrend manches mal.Ändere mal in der /lib/udev/rules.d/90-pulseaudio.rules folgendes (mittlerweile Standard in Pulse)

von jetzt
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1010", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"
in
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1010", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1011", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"

Puls schreibt dazu

# There appear to be two IDs in use for Traktor Audio 6 (or maybe 17cc:1011
# is just incorrect - 17cc:1010 has been verified to be correct at least
# for some hardware).

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Jetzt ist die Traktor Audio 6 im pavucontrol bei "Input Devices" und "Output Devices" weg.

Unter "Configuration" (ebenfalls im pavucontrol) ist >Traktor Audio 6< nach wie vor gelistet, aber mit anderen Optionen als bisher: >Analog Stereo Duplex Channel A, B (Headphones)<, >Analog Stereo Duplex Channel Main<, >Analog Stereo Duplex Channel A<, >Analog Stereo Duplex Channel B<, >Off<.

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Starte neu,stelle wieder deine Situation her und zeige erneut

pacmd info

😉

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 9, size: 85,7 KiB.
Memory blocks allocated during the whole lifetime: 10866, size: 20,7 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 7 allocated/4641 accumulated.
Memory blocks of type POOL_EXTERNAL: 2 allocated/3064 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/6225 accumulated.
Memory blocks of type IMPORTED: 0 allocated/0 accumulated.
25 module(s) loaded.
    index: 0
	name: <module-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "4.0"
    index: 1
	name: <module-stream-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "4.0"
    index: 2
	name: <module-card-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "4.0"
    index: 3
	name: <module-augment-properties>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "4.0"
    index: 4
	name: <module-switch-on-port-available>
	argument: <>
	used: -1
	load once: no
	properties:
		
    index: 5
	name: <module-alsa-card>
	argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 3
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "4.0"
    index: 6
	name: <module-alsa-card>
	argument: <device_id="1" name="usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6" card_name="alsa_card.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 0
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "4.0"
    index: 7
	name: <module-udev-detect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "4.0"
    index: 8
	name: <module-bluetooth-policy>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Frédéric Dalleau"
		module.description = "When a bluetooth sink or source is added, load module-loopback"
		module.version = "4.0"
    index: 9
	name: <module-bluetooth-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Joao Paulo Rechi Vita"
		module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
		module.version = "4.0"
    index: 10
	name: <module-native-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "4.0"
    index: 11
	name: <module-default-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "4.0"
    index: 12
	name: <module-rescue-streams>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
		module.version = "4.0"
    index: 13
	name: <module-always-sink>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.version = "4.0"
    index: 14
	name: <module-intended-roles>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based of intended roles of devices"
		module.version = "4.0"
    index: 15
	name: <module-suspend-on-idle>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "4.0"
    index: 16
	name: <module-systemd-login>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "4.0"
    index: 17
	name: <module-position-event-sounds>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "4.0"
    index: 18
	name: <module-filter-heuristics>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "4.0"
    index: 19
	name: <module-filter-apply>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "4.0"
    index: 20
	name: <module-x11-publish>
	argument: <display=:0>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "4.0"
    index: 21
	name: <module-x11-bell>
	argument: <display=:0 sample=bell.ogg>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 bell interceptor"
		module.version = "4.0"
    index: 22
	name: <module-x11-cork-request>
	argument: <display=:0>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "4.0"
    index: 23
	name: <module-x11-xsmp>
	argument: <display=:0 session_manager=local/benja:@/tmp/.ICE-unix/2050,unix/benja:/tmp/.ICE-unix/2050>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "4.0"
    index: 24
	name: <module-cli-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Command line interface protocol (UNIX sockets)"
		module.version = "4.0"
1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: 
	priority: 9959
	volume: 0:  58% 1:  58%
	        0: -14,00 dB 1: -14,00 dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: no
	current latency: 20,91 ms
	max request: 3 KiB
	max rewind: 64 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 20,00 ms; range is 0,50 .. 371,52 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 5
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20585 Analog"
		alsa.id = "CX20585 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Intel IbexPeak HDMI"
		alsa.components = "HDA:14f15069,104313f3,00100302 HDA:80862804,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
2 source(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 1950
	volume: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 64 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 20,00 ms; range is 0,50 .. 371,52 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 5
	properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
  * index: 1
	name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9959
	volume: 0:  79% 1:  79%
	        0: -6,00 dB 1: -6,00 dB
	        balance 0,00
	base volume:  79%
	             -6,00 dB
	volume steps: 65537
	muted: yes
	current latency: 0,93 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 20,00 ms; range is 1,00 .. 341,33 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 5
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20585 Analog"
		alsa.id = "CX20585 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Intel IbexPeak HDMI"
		alsa.components = "HDA:14f15069,104313f3,00100302 HDA:80862804,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-input-microphone-internal: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-microphone: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-microphone-internal>
6 client(s) logged in.
    index: 0
	driver: <module-systemd-login.c>
	owner module: 16
	properties:
		application.name = "Login Session c2"
		systemd-login.session = "c2"
    index: 1
	driver: <protocol-native.c>
	owner module: 10
	properties:
		application.name = "GNOME Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "1.0"
		application.process.id = "2028"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "unity-settings-daemon"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
    index: 7
	driver: <module-x11-xsmp.c>
	owner module: 23
	properties:
		application.name = "XSMP Session on gnome-session as 1052ce2fdb12bf654158584395672337300000020500044"
		xsmp.vendor = "gnome-session"
		xsmp.client.id = "1052ce2fdb12bf654158584395672337300000020500044"
    index: 8
	driver: <protocol-native.c>
	owner module: 10
	properties:
		application.name = "Ubuntu Audio Settings"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "com.canonical.settings.sound"
		application.icon_name = "multimedia-volume-control"
		application.version = "0.1"
		application.process.id = "2193"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "indicator-sound-service"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
    index: 32
	driver: <protocol-native.c>
	owner module: 10
	properties:
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2786"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
    index: 35
	driver: <cli.c>
	owner module: 24
	properties:
		application.name = "UNIX socket client"
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 5
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel MID"
		alsa.long_card_name = "HDA Intel MID at 0xd5400000 irq 31"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "3b56"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5460, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 360, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-microphone-internal: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-microphone: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "Traktor Audio 6"
		alsa.long_card_name = "Native Instruments Traktor Audio 6 at usb-0000:00:1d.0-1.2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/sound/card1"
		udev.id = "usb-Native_Instruments_Traktor_Audio_6_2EF8ED48-00-T6"
		device.bus = "usb"
		device.vendor.id = "17cc"
		device.vendor.name = "Native Instruments"
		device.product.id = "1011"
		device.product.name = "Traktor Audio 6"
		device.serial = "Native_Instruments_Traktor_Audio_6_2EF8ED48"
		device.string = "1"
		device.description = "Traktor Audio 6"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	profiles:
		output:analog-stereo-all+input:analog-stereo-all: Analog Stereo Duplex Channels A, B (Headphones) (priority 100, available: unknown)
		output:analog-stereo-main+input:analog-stereo-main: Analog Stereo Duplex Channel Main (priority 50, available: unknown)
		output:analog-stereo-a+input:analog-stereo-a: Analog Stereo Duplex Channel A (priority 40, available: unknown)
		output:analog-stereo-b+input:analog-stereo-b: Analog Stereo Duplex Channel B (priority 30, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo-main+input:analog-stereo-main>
0 sink input(s) available.
2 source outputs(s) available.
    index: 18
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
	volume: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	muted: no
	current latency: 15,71 ms
	requested latency: 20,00 ms
	sample spec: float32le 1ch 25Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 32 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2786"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 19
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
	volume: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	muted: no
	current latency: 0,00 ms
	requested latency: 20,00 ms
	sample spec: float32le 1ch 25Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 32 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "2.0"
		application.process.id = "2786"
		application.process.user = "benja"
		application.process.host = "benja"
		application.process.binary = "pavucontrol"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "8760a493155a81d4fd2c553955e09301"
		application.process.session_id = "c2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
0 cache entrie(s) available.

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Mag sein das Pulseaudio Version 4 zu alt für dein Vorhaben ist – aktuell ist Pulseaudio bei Version 13

Ergo,mal hier laden http://cdimage.ubuntu.com/ubuntu-mate/daily-live/current/

dann mal Live testen.Ich glaube alles andere ist verschenkte Zeit.

ben178

(Themenstarter)

Anmeldungsdatum:
8. Februar 2011

Beiträge: 66

Ja, ich habe mich nach dem ursprünglichen Post auch schon nach neueren Versionen umgeschaut, als ich gemerkt habe dass ich meine Version hier im Forum nicht mal mehr angeben kann.

Mal sehen was es am Ende wird, damit das auf meinem alten Laptop gut läuft. Ich mache einen neuen Thread unter "Systemverwaltung, Installation, Aktualisierung" → "Vor der Installation und grundlegende Fragen" um mir mehr Tipps dazu zu holen, im Moment bin ich etwas überfordert von den verschiedenen Flavours. Falls Du mir schreiben magst, warum das 20.04 Mate für mich das richtige OS sein könnte, freue ich mich natürlich 😉

Vielen, vielen Dank für die Antworten!!

Antworten |