staging.inyokaproject.org

if [[ "$3" = "hdd" || "$3" = "all" ]]; then
FREE="`pct exec $2 df | grep /dev/loop0`"
SIZE=$( echo "$FREE" | awk '{print $2}' )
USED=$( echo "$FREE" | awk '{print $3}' )
AVAI=$( echo "$FREE" | awk '{print $4}' )
PERC=$( echo "$FREE" | awk '{print $5}' )

if [ "$3" != "all" ]; then
return_info="$SIZE,$USED,$AVAI,$PERC"
else
HDD="$SIZE,$USED,$AVAI,$PERC"
fi
fi

In info line 215:
FREE="`pct exec $2 df (%) | grep /dev/loop0`"
^-- SC2006: Use $(..) instead of legacy `..`.
^-- SC2086: Double quote to prevent glo bbing and word splitting.

In info line 215:
                        FREE=$( pct exec $2 df (%) | grep /dev/loop0 )
                             ^-- SC1073: Couldn't parse this command expansion.
                             ^-- SC1009: The mentioned parser error was in this command expansion.
                                               ^-- SC1036: '(' is invalid here. Did you forget to escape it?
                                               ^-- SC1072: Expected end of $(..) expression. Fix any mentioned problems and try again.

	if [ "$1" = "LXC" ]; then
	Status_VS "$1" "$2" "$3"
	STATUS="$return_status"

		if [ "$return_status" = "RUNNING" ]; then
	
			if [[ "$3" = "uptime" || "$3" = "all" ]]; then
			UPT0=$"`pct exec $2 uptime`"
			UPT1=$( echo "$UPT0" | awk -F"up " '{print $2}' | awk -F"load" '{print $1}' )
			UPT2=$( echo "$UPT1" | sed -e 's/,//g' )
			UPT3=$( echo "$UPT2" | awk -F"  " '{print $1}' )
			UPT4=$( echo "$UPT3" | cut -d" " -f2 )

				if [ "$UPT4" = "min" ]; then
				UPT5=$( echo "$UPT3" | cut -d" " -f1 )
				
					if [ "$3" != "all" ]; then
						return_info="0,0,$UPT5,0"
					else
						UPTIME="0,0,$UPT5,0"
					fi
				fi
				
				if [[ "$UPT4" = "day" || "$UPT4" = "days" ]]; then
				UPT5=$( echo "$UPT3" | cut -d" " -f1 )
				UPT6=$( echo "$UPT3" | cut -d" " -f3 )
				UPT7=$( echo "$UPT6" | cut -d":" -f1 )
				UPT8=$( echo "$UPT6" | cut -d":" -f2 )

					if [ "$3" != "all" ]; then
						return_info="$UPT5,$UPT7,$UPT8,0"
					else
						UPTIME="$UPT5,$UPT7,$UPT8,0"
					fi

				fi
				
				if [[ "$UPT4" != "min" && "$UPT4" != "day" && "$UPT4" != "days" ]] ; then
				UPT5=$( echo "$UPT3" | cut -d":" -f1 )
				UPT6=$( echo "$UPT3" | cut -d":" -f2 )

					if [ "$3" != "all" ]; then
						return_info="0,$UPT5,$UPT6,0"
					else
						UPTIME="0,$UPT5,$UPT6,0"
					fi
				fi
			fi
			
			if [[ "$3" = "ram" || "$3" = "all" ]]; then
			FREE="`pct exec $2 free | head -n 2 | tail -n 1`"
			SIZE=$( echo "$FREE" | awk '{print $2}' )
			USED=$( echo "$FREE" | awk '{print $3}' )
			AVAI=$( echo "$FREE" | awk '{print $4}' )

				if [ "$3" != "all" ]; then
					return_info="$SIZE,$USED,$AVAI"
				else
					RAM="$SIZE,$USED,$AVAI"
				fi
			fi
			
			if [[ "$3" = "cpu" || "$3" = "all" ]]; then
				if [ "$3" != "all" ]; then
					return_info="0"
				else
					CPU="0"
				fi
			fi
			
			if [[ "$3" = "swap" || "$3" = "all" ]]; then
			FREE="(pct exec $2 free | tail -n 1 | head -1)"
			SIZE=$( echo "$FREE" | awk '{print $2}' )
			USED=$( echo "$FREE" | awk '{print $3}' )
			AVAI=$( echo "$FREE" | awk '{print $4}' )
				
				if [ "$3" != "all" ]; then
					return_info="$SIZE,$USED,$AVAI"
				else
					SWAP="$SIZE,$USED,$AVAI"
				fi
			fi
		
			if [[ "$3" = "hdd" || "$3" = "all" ]]; then
			FREE=$( pct exec $2 df (%) | grep /dev/loop0 )
			SIZE=$( echo "$FREE" | awk '{print $2}' )
			USED=$( echo "$FREE" | awk '{print $3}' )
			AVAI=$( echo "$FREE" | awk '{print $4}' )
			PERC=$( echo "$FREE" | awk '{print $5}' )

				if [ "$3" != "all" ]; then
				return_info="$SIZE,$USED,$AVAI,$PERC"
				else
					HDD="$SIZE,$USED,$AVAI,$PERC"
				fi
			fi

			if [ "$3" = "status" ]; then
				return_info="$STATUS"
			fi
			
			if [ "$3" = "all" ]; then
				return_info="$STATUS|$UPTIME|$HDD|$RAM|$SWAP|$CPU"
			fi
			
		else
		return_info="NOK"
		fi
		
	fi