staging.inyokaproject.org

Klangeinstellung

Status: Ungelöst | Ubuntu-Version: Ubuntu MATE 18.04 (Bionic Beaver)
Antworten |

phalstek

Anmeldungsdatum:
29. September 2007

Beiträge: 361

Hallo,

es gelingt mir einfach nicht den Ton stabil

einzustellen.

Die beiden angezeigten Testlautsprecher geben nur

bei der Einstellung Barts HDMI Audio einen Ton von sich.

Leider ist diese Einstellung nicht stabil.

Nach ausschalten und testen wird wieder Audio Adapter

zurückgeschaltet und da gibt es keinen Ton.

Hatte ich diese Frage schon gestellt finde ich die aber leider

nicht mehr im Forum.

Moderiert von Taomon:

Dieses Thema ist verschoben worden. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“)!

Anhang

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Dann zeige mal

aplay -l

dmesg | egrep -i "alsa|snd"

head -n 1 /proc/asound/card*/codec#*

phalstek

(Themenstarter)

Anmeldungsdatum:
29. September 2007

Beiträge: 361

Hier sind die Gewünschten Teile

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
Code
sonja@sonja-HP-ProBook-470-G5:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: CX8200 Analog [CX8200 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 9: HDMI 3 [HDMI 3]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 10: HDMI 4 [HDMI 4]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
sonja@sonja-HP-ProBook-470-G5:~$
sonja@sonja-HP-ProBook-470-G5:~$ dmesg | egrep -i "alsa|snd"
[    8.634365] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    8.634586] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.676258] snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing.
[    8.676775] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    8.676776] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.676778] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    8.676779] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    8.676779] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    8.676781] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[    8.676782] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[    8.677711] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
sonja@sonja-HP-ProBook-470-G5:~$ Code
1
2
3
4
5
6
7
sonja@sonja-HP-ProBook-470-G5:~$ head -n 1 /proc/asound/card*/codec#*
==> /proc/asound/card0/codec#0 <==
Codec: Conexant CX8200

==> /proc/asound/card0/codec#2 <==
Codec: Intel Kabylake HDMI
sonja@sonja-HP-ProBook-470-G5:~$ 

Codeblöcke ist nicht so mein Ding dafür benutze ich die zu selten,

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Da ist keine Barts Karte,war sie Eingesteckt bei der Abfrage?? Dann nochmal

aplay -l

lsusb

phalstek

(Themenstarter)

Anmeldungsdatum:
29. September 2007

Beiträge: 361

Hallo, es hat etwas gedauert aber nachfolgend die gewünschten Codeblocks.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
sonja@sonja-HP-ProBook-470-G5:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: CX8200 Analog [CX8200 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 9: HDMI 3 [HDMI 3]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 10: HDMI 4 [HDMI 4]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
sonja@sonja-HP-ProBook-470-G5:~$ 
1
2
3
4
5
6
7
8
sonja@sonja-HP-ProBook-470-G5:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader
Bus 001 Device 004: ID 8087:0a2b Intel Corp. 
Bus 001 Device 003: ID 04ca:706d Lite-On Technology Corp. 
Bus 001 Device 002: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sonja@sonja-HP-ProBook-470-G5:~$

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19617

Ich weiß nicht wo Pulse deine Radeon HDMI her hat/findet 😕 Alsa findet sie scheinbar ja nicht und von daher – wo findet sie Pulse ❓

Sollte alles Out of Box Laufen https://help.ubuntu.com/community/RadeonDriver (Fully supported)

Ohne große Hoffnung wenn Ton über HDMI ausgegeben wird

dmesg | egrep 'drm|radeon|HDMI'

pacmd info

pactl info
Antworten |