Hallo,
vielen Dank schon mal.
lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 55,9G 0 disk
├─sda1 8:1 0 44,7G 0 part /
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 9,3G 0 part
└─sda6 8:6 0 1,9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
parted:
Modell: ATA FUJITSU MHT2060A (scsi)
Festplatte /dev/sda: 60,0GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Nummer Anfang Ende Größe Typ Dateisystem Flags
1 1049kB 48,0GB 48,0GB primary ext4 boot
2 48,0GB 60,0GB 12,0GB extended
5 48,0GB 58,0GB 9999MB logical
6 58,0GB 60,0GB 2010MB logical linux-swap(v1)
Hefeweiz3n schrieb:
Vor allem parted hilft ungemein weiter, weil es auch anzeigt welches Dateisystem dort drauf ist (oder nicht drauf ist).
Es ist also auf sda5 kein Dateisystem. Heißt das, dass dort auch keine Daten liegen können? Ich glaube, ich habe damals bei der Installation eine 10GB-Partition "für später" erstellt; kann man überhaupt eine Partition auch ohne Dateisystem anlegen?
mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=kemi)