staging.inyokaproject.org

Desktop friert ein (oder: System stürzt ab)

Status: Ungelöst | Ubuntu-Version: Kubuntu 14.04 (Trusty Tahr)
Antworten |

dongxi

Avatar von dongxi

Anmeldungsdatum:
23. August 2006

Beiträge: 409

Hi,

seit ein paar Tagen habe ich folgendes Problem:

in völlig unverhersehbaren Abständen friert der Bildschirm oder auch der ganze Computer friert ein, (fast) nichts geht mehr.

"ALT" + "PrintScreen" + REISUB

funktioniert, der Computer wird neu gebootet.

"ALT" + "PrintScreen" + K

für den XServer funktioniert nicht...

Nach Einstellungen in der Tastatur, so dachte ich, könnte

"Strg" + "Alt" + "BackSpace"

funktioniert auch nicht.

ClamTK findet nur Heuristic.pdf dateien, die ich schon ewig "rumliegen" habe.

Was muss ich nun machen, um einen log-bericht zu erstellen und zu verstehen?

Danke schon im Vorraus ☺

V_for_Vortex Team-Icon

Avatar von V_for_Vortex

Anmeldungsdatum:
1. Februar 2007

Beiträge: 12095

dongxi schrieb:

"ALT" + "PrintScreen" + REISUB

funktioniert, der Computer wird neu gebootet.

Nebenbei, REI funktioniert seit (K)Ubuntu 14.10 nicht mehr ohne händische Anpassung, ohne diese geht nur noch SUB. Siehe Magic SysRQ: Anwenden, grauer Kasten.

Was muss ich nun machen, um einen log-bericht zu erstellen und zu verstehen?

Siehe Logdateien, hier wären wahrscheinlich das syslog und das Xorg.0.log interessant.

Zum Verstehen hilft eigentlich nur das Erlernen der technischen Interna eines typischen Linux-Systems. 🤓 Für den aktuellen Fall könntest Du die Logs hier für potentielle Helfer in Codeblöcken einstellen, ggf. nachdem Du sie auf private Informationen gecheckt hast (Rechner- oder Usernamen etc.)

napo22

Anmeldungsdatum:
2. Juli 2011

Beiträge: 146

Das wichtigste ist, du musst dich erinnern seit wann der Fehler auftritt, und ob du vorher etwas neu installiert oder sonst was geändert hast. Die Änderungen machen sich oft erst bemerkbar wenn das System nach längeren Stillstand (ein paar Stunden) wieder hochgefahren wird. Log-Berichte werden automatisch angelegt. Siehe /var/log. Um die zu verstehen muss du sehr gut in linux sein. z.B syslog zeigt an was das System macht wenn gebootet wird und apport die Fehlermeldungen. Andere wissen hierüber mehr als ich.

dongxi

(Themenstarter)
Avatar von dongxi

Anmeldungsdatum:
23. August 2006

Beiträge: 409

So, daß REI nicht mehr funktioniert hatte ich gelesen, ich wusste nur nicht mehr genau ob ich SUB oder UB brauche und hab lieber alles benutzt 😉

Hier aber erstmal die

Xorg.0.log

[    21.415] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    21.415] X Protocol Version 11, Revision 0
[    21.415] Build Operating System: Linux 3.2.0-76-generic x86_64 Ubuntu
[    21.415] Current Operating System: Linux ********** 3.13.0-63-generic #103-Ubuntu SMP Fri Aug 14 21:42:59 UTC 2015 x86_64
[    21.415] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic root=UUID=1ff43edf-6d67-4f21-9e89-7cf9ad40d712 ro quiet splash
[    21.415] Build Date: 12 February 2015  02:49:29PM
[    21.415] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support) 
[    21.415] Current version of pixman: 0.30.2
[    21.415] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    21.415] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.415] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 20 18:33:49 2015
[    21.444] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.519] (==) No Layout section.  Using the first Screen section.
[    21.519] (==) No screen section available. Using defaults.
[    21.519] (**) |-->Screen "Default Screen Section" (0)
[    21.519] (**) |   |-->Monitor "<default monitor>"
[    21.519] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    21.519] (==) Automatically adding devices
[    21.519] (==) Automatically enabling devices
[    21.519] (==) Automatically adding GPU devices
[    21.519] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    21.519] 	Entry deleted from font path.
[    21.519] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    21.519] 	Entry deleted from font path.
[    21.519] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    21.519] 	Entry deleted from font path.
[    21.519] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    21.519] 	Entry deleted from font path.
[    21.519] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    21.519] 	Entry deleted from font path.
[    21.519] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    21.519] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    21.520] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.520] (II) Loader magic: 0x7f401a9d2d40
[    21.520] (II) Module ABI versions:
[    21.520] 	X.Org ANSI C Emulation: 0.4
[    21.520] 	X.Org Video Driver: 15.0
[    21.520] 	X.Org XInput driver : 20.0
[    21.520] 	X.Org Server Extension : 8.0
[    21.520] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.521] (--) PCI:*(0:1:0:0) 10de:0dc4:10b0:0401 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xec000000/33554432, I/O @ 0x0000bf00/128, BIOS @ 0x????????/524288
[    21.521] Initializing built-in extension Generic Event Extension
[    21.521] Initializing built-in extension SHAPE
[    21.521] Initializing built-in extension MIT-SHM
[    21.521] Initializing built-in extension XInputExtension
[    21.521] Initializing built-in extension XTEST
[    21.521] Initializing built-in extension BIG-REQUESTS
[    21.521] Initializing built-in extension SYNC
[    21.521] Initializing built-in extension XKEYBOARD
[    21.521] Initializing built-in extension XC-MISC
[    21.521] Initializing built-in extension SECURITY
[    21.521] Initializing built-in extension XINERAMA
[    21.521] Initializing built-in extension XFIXES
[    21.521] Initializing built-in extension RENDER
[    21.521] Initializing built-in extension RANDR
[    21.521] Initializing built-in extension COMPOSITE
[    21.521] Initializing built-in extension DAMAGE
[    21.521] Initializing built-in extension MIT-SCREEN-SAVER
[    21.521] Initializing built-in extension DOUBLE-BUFFER
[    21.521] Initializing built-in extension RECORD
[    21.521] Initializing built-in extension DPMS
[    21.521] Initializing built-in extension Present
[    21.521] Initializing built-in extension DRI3
[    21.521] Initializing built-in extension X-Resource
[    21.521] Initializing built-in extension XVideo
[    21.521] Initializing built-in extension XVideo-MotionCompensation
[    21.521] Initializing built-in extension SELinux
[    21.521] Initializing built-in extension XFree86-VidModeExtension
[    21.521] Initializing built-in extension XFree86-DGA
[    21.521] Initializing built-in extension XFree86-DRI
[    21.521] Initializing built-in extension DRI2
[    21.521] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    21.521] (II) "glx" will be loaded by default.
[    21.521] (WW) "xmir" is not to be loaded by default. Skipping.
[    21.521] (II) LoadModule: "glx"
[    21.521] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    21.530] (II) Module glx: vendor="NVIDIA Corporation"
[    21.530] 	compiled for 4.0.2, module version = 1.0.0
[    21.530] 	Module class: X.Org Server Extension
[    21.530] (II) NVIDIA GLX Module  340.76  Thu Jan 22 11:24:42 PST 2015
[    21.530] Loading extension GLX
[    21.530] (==) Matched nvidia as autoconfigured driver 0
[    21.530] (==) Matched nouveau as autoconfigured driver 1
[    21.530] (==) Matched nvidia as autoconfigured driver 2
[    21.530] (==) Matched nouveau as autoconfigured driver 3
[    21.530] (==) Matched modesetting as autoconfigured driver 4
[    21.530] (==) Matched fbdev as autoconfigured driver 5
[    21.530] (==) Matched vesa as autoconfigured driver 6
[    21.530] (==) Assigned the driver to the xf86ConfigLayout
[    21.530] (II) LoadModule: "nvidia"
[    21.530] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    21.531] (II) Module nvidia: vendor="NVIDIA Corporation"
[    21.531] 	compiled for 4.0.2, module version = 1.0.0
[    21.531] 	Module class: X.Org Video Driver
[    21.531] (II) LoadModule: "nouveau"
[    21.531] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.553] (II) Module nouveau: vendor="X.Org Foundation"
[    21.553] 	compiled for 1.15.0, module version = 1.0.10
[    21.553] 	Module class: X.Org Video Driver
[    21.553] 	ABI class: X.Org Video Driver, version 15.0
[    21.553] (II) LoadModule: "modesetting"
[    21.553] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.553] (II) Module modesetting: vendor="X.Org Foundation"
[    21.553] 	compiled for 1.15.0, module version = 0.8.1
[    21.553] 	Module class: X.Org Video Driver
[    21.553] 	ABI class: X.Org Video Driver, version 15.0
[    21.553] (II) LoadModule: "fbdev"
[    21.553] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.553] (II) Module fbdev: vendor="X.Org Foundation"
[    21.553] 	compiled for 1.15.0, module version = 0.4.4
[    21.553] 	Module class: X.Org Video Driver
[    21.553] 	ABI class: X.Org Video Driver, version 15.0
[    21.553] (II) LoadModule: "vesa"
[    21.553] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.554] (II) Module vesa: vendor="X.Org Foundation"
[    21.554] 	compiled for 1.15.0, module version = 2.3.3
[    21.554] 	Module class: X.Org Video Driver
[    21.554] 	ABI class: X.Org Video Driver, version 15.0
[    21.554] (II) NVIDIA dlloader X Driver  340.76  Thu Jan 22 11:03:05 PST 2015
[    21.554] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    21.554] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    21.554] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.554] 	RIVA TNT        (NV04)
[    21.554] 	RIVA TNT2       (NV05)
[    21.554] 	GeForce 256     (NV10)
[    21.554] 	GeForce 2       (NV11, NV15)
[    21.554] 	GeForce 4MX     (NV17, NV18)
[    21.554] 	GeForce 3       (NV20)
[    21.554] 	GeForce 4Ti     (NV25, NV28)
[    21.554] 	GeForce FX      (NV3x)
[    21.554] 	GeForce 6       (NV4x)
[    21.554] 	GeForce 7       (G7x)
[    21.554] 	GeForce 8       (G8x)
[    21.554] 	GeForce GTX 200 (NVA0)
[    21.554] 	GeForce GTX 400 (NVC0)
[    21.554] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.554] (II) FBDEV: driver for framebuffer: fbdev
[    21.554] (II) VESA: driver for VESA chipsets: vesa
[    21.554] (++) using VT number 7

[    21.555] (II) Loading sub module "fb"
[    21.555] (II) LoadModule: "fb"
[    21.555] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.555] (II) Module fb: vendor="X.Org Foundation"
[    21.555] 	compiled for 1.15.1, module version = 1.0.0
[    21.555] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.555] (WW) Unresolved symbol: fbGetGCPrivateKey
[    21.555] (II) Loading sub module "wfb"
[    21.555] (II) LoadModule: "wfb"
[    21.568] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    21.568] (II) Module wfb: vendor="X.Org Foundation"
[    21.568] 	compiled for 1.15.1, module version = 1.0.0
[    21.568] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.568] (II) Loading sub module "ramdac"
[    21.568] (II) LoadModule: "ramdac"
[    21.568] (II) Module "ramdac" already built-in
[    21.568] (WW) Falling back to old probe method for modesetting
[    21.568] (WW) Falling back to old probe method for fbdev
[    21.568] (II) Loading sub module "fbdevhw"
[    21.568] (II) LoadModule: "fbdevhw"
[    21.568] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.568] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.568] 	compiled for 1.15.1, module version = 0.0.2
[    21.568] 	ABI class: X.Org Video Driver, version 15.0
[    21.568] (EE) open /dev/fb0: No such file or directory
[    21.568] (WW) Falling back to old probe method for vesa
[    21.568] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.568] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    21.568] (==) NVIDIA(0): RGB weight 888
[    21.568] (==) NVIDIA(0): Default visual is TrueColor
[    21.568] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.569] (**) NVIDIA(0): Enabling 2D acceleration
[    22.099] (II) NVIDIA(0): Display (HP w1907 (CRT-1)) does not support NVIDIA 3D Vision
[    22.099] (II) NVIDIA(0):     stereo.
[    22.100] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    22.100] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:1:0:0 (GPU-0)
[    22.100] (--) NVIDIA(0): Memory: 1048576 kBytes
[    22.100] (--) NVIDIA(0): VideoBIOS: 70.06.1f.00.00
[    22.100] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    22.103] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[    22.103] (--) NVIDIA(0):     CRT-0
[    22.103] (--) NVIDIA(0):     HP w1907 (CRT-1) (boot, connected)
[    22.103] (--) NVIDIA(0):     DFP-0
[    22.103] (--) NVIDIA(0):     DFP-1
[    22.103] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    22.103] (--) NVIDIA(GPU-0): HP w1907 (CRT-1): 400.0 MHz maximum pixel clock
[    22.103] (--) NVIDIA(0): DFP-0: Internal TMDS
[    22.103] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    22.103] (--) NVIDIA(0): DFP-1: Internal TMDS
[    22.103] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    22.103] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    22.103] (**) NVIDIA(0):     device HP w1907 (CRT-1) (Using EDID frequencies has been
[    22.103] (**) NVIDIA(0):     enabled on all display devices.)
[    22.104] (==) NVIDIA(0): 
[    22.104] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    22.104] (==) NVIDIA(0):     will be used as the requested mode.
[    22.104] (==) NVIDIA(0): 
[    22.104] (II) NVIDIA(0): Validated MetaModes:
[    22.104] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[    22.104] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[    22.131] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[    22.131] (--) NVIDIA(0):     option
[    22.131] (II) UnloadModule: "nouveau"
[    22.131] (II) Unloading nouveau
[    22.132] (II) UnloadModule: "modesetting"
[    22.132] (II) Unloading modesetting
[    22.132] (II) UnloadModule: "fbdev"
[    22.132] (II) Unloading fbdev
[    22.132] (II) UnloadSubModule: "fbdevhw"
[    22.132] (II) Unloading fbdevhw
[    22.132] (II) UnloadModule: "vesa"
[    22.132] (II) Unloading vesa
[    22.132] (--) Depth 24 pixmap format is 32 bpp
[    22.132] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    22.132] (II) NVIDIA:     access.
[    22.137] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[    22.176] Loading extension NV-GLX
[    22.226] (==) NVIDIA(0): Disabling shared memory pixmaps
[    22.226] (==) NVIDIA(0): Backing store enabled
[    22.226] (==) NVIDIA(0): Silken mouse enabled
[    22.226] (==) NVIDIA(0): DPMS enabled
[    22.227] Loading extension NV-CONTROL
[    22.227] Loading extension XINERAMA
[    22.227] (II) Loading sub module "dri2"
[    22.227] (II) LoadModule: "dri2"
[    22.227] (II) Module "dri2" already built-in
[    22.227] (II) NVIDIA(0): [DRI2] Setup complete
[    22.227] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    22.227] (--) RandR disabled
[    22.231] (II) SELinux: Disabled on system
[    22.231] (II) Initializing extension GLX
[    22.242] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    22.244] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    22.244] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.244] (II) LoadModule: "evdev"
[    22.244] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.253] (II) Module evdev: vendor="X.Org Foundation"
[    22.253] 	compiled for 1.15.0, module version = 2.8.2
[    22.253] 	Module class: X.Org XInput Driver
[    22.253] 	ABI class: X.Org XInput driver, version 20.0
[    22.253] (II) Using input driver 'evdev' for 'Power Button'
[    22.253] (**) Power Button: always reports core events
[    22.253] (**) evdev: Power Button: Device: "/dev/input/event1"
[    22.253] (--) evdev: Power Button: Vendor 0 Product 0x1
[    22.253] (--) evdev: Power Button: Found keys
[    22.253] (II) evdev: Power Button: Configuring as keyboard
[    22.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    22.253] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    22.253] (**) Option "xkb_rules" "evdev"
[    22.253] (**) Option "xkb_model" "pc105"
[    22.253] (**) Option "xkb_layout" "de"
[    22.254] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[    22.254] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    22.254] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.254] (II) Using input driver 'evdev' for 'Power Button'
[    22.254] (**) Power Button: always reports core events
[    22.254] (**) evdev: Power Button: Device: "/dev/input/event0"
[    22.254] (--) evdev: Power Button: Vendor 0 Product 0x1
[    22.254] (--) evdev: Power Button: Found keys
[    22.254] (II) evdev: Power Button: Configuring as keyboard
[    22.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    22.254] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    22.254] (**) Option "xkb_rules" "evdev"
[    22.254] (**) Option "xkb_model" "pc105"
[    22.254] (**) Option "xkb_layout" "de"
[    22.255] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0/drm/card0
[    22.255] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    22.255] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[    22.255] (II) No input driver specified, ignoring this device.
[    22.255] (II) This device may have been added with another device file.
[    22.255] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[    22.255] (II) No input driver specified, ignoring this device.
[    22.255] (II) This device may have been added with another device file.
[    22.255] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[    22.255] (II) No input driver specified, ignoring this device.
[    22.255] (II) This device may have been added with another device file.
[    22.255] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[    22.255] (II) No input driver specified, ignoring this device.
[    22.255] (II) This device may have been added with another device file.
[    22.255] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event3)
[    22.255] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[    22.255] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[    22.255] (**) Logitech USB Laser Mouse: always reports core events
[    22.255] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event3"
[    22.255] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc062
[    22.255] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[    22.255] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[    22.255] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[    22.255] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[    22.255] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[    22.255] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[    22.256] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[    22.256] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    22.256] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input3/event3"
[    22.256] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 8)
[    22.256] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[    22.256] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[    22.256] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[    22.256] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[    22.256] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[    22.256] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[    22.256] (II) No input driver specified, ignoring this device.
[    22.256] (II) This device may have been added with another device file.
[    22.256] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event5)
[    22.256] (II) No input driver specified, ignoring this device.
[    22.256] (II) This device may have been added with another device file.
[    22.256] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event4)
[    22.256] (II) No input driver specified, ignoring this device.
[    22.256] (II) This device may have been added with another device file.
[    22.256] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event11)
[    22.256] (II) No input driver specified, ignoring this device.
[    22.256] (II) This device may have been added with another device file.
[    22.257] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event10)
[    22.257] (II) No input driver specified, ignoring this device.
[    22.257] (II) This device may have been added with another device file.
[    22.257] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event9)
[    22.257] (II) No input driver specified, ignoring this device.
[    22.257] (II) This device may have been added with another device file.
[    22.257] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event8)
[    22.257] (II) No input driver specified, ignoring this device.
[    22.257] (II) This device may have been added with another device file.
[    22.257] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event7)
[    22.257] (II) No input driver specified, ignoring this device.
[    22.257] (II) This device may have been added with another device file.
[    22.257] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event6)
[    22.257] (II) No input driver specified, ignoring this device.
[    22.257] (II) This device may have been added with another device file.
[    22.257] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    22.257] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    22.257] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    22.257] (**) AT Translated Set 2 keyboard: always reports core events
[    22.257] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    22.257] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    22.257] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    22.257] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    22.257] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    22.257] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    22.257] (**) Option "xkb_rules" "evdev"
[    22.257] (**) Option "xkb_model" "pc105"
[    22.257] (**) Option "xkb_layout" "de"
[    32.512] (II) XKB: reuse xkmfile /var/lib/xkb/server-935791BB8D314AF76E0BAA786B66BB82FD866F95.xkm
[    39.001] (II) NVIDIA(GPU-0): Display (HP w1907 (CRT-1)) does not support NVIDIA 3D Vision
[    39.001] (II) NVIDIA(GPU-0):     stereo.
[    39.205] (II) NVIDIA(GPU-0): Display (HP w1907 (CRT-1)) does not support NVIDIA 3D Vision
[    39.205] (II) NVIDIA(GPU-0):     stereo.
[    39.973] (II) NVIDIA(GPU-0): Display (HP w1907 (CRT-1)) does not support NVIDIA 3D Vision
[    39.973] (II) NVIDIA(GPU-0):     stereo.
[    42.483] (II) NVIDIA(GPU-0): Display (HP w1907 (CRT-1)) does not support NVIDIA 3D Vision
[    42.483] (II) NVIDIA(GPU-0):     stereo.
[    57.295] (II) XKB: reuse xkmfile /var/lib/xkb/server-935791BB8D314AF76E0BAA786B66BB82FD866F95.xkm

syslog:

Sep 20 10:48:07 alle-zuhause anacron[1019]: Job `cron.daily' terminated
Sep 20 10:48:07 alle-zuhause anacron[1019]: Normal exit (1 job run)
Sep 20 10:50:52 alle-zuhause kernel: [  657.960350] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Sep 20 10:50:52 alle-zuhause kernel: [  657.960365] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Sep 20 10:50:54 alle-zuhause colord: Profile removed: icc-8bad74ec2642c648403bfbe838d94337
Sep 20 10:50:54 alle-zuhause colord: Automatic remove of icc-913deaff22c735230b498e00bc28afad from xrandr-Hewlett Packard-HP w1907-3CQ81316B3
Sep 20 10:50:54 alle-zuhause colord: Profile removed: icc-913deaff22c735230b498e00bc28afad
Sep 20 10:50:54 alle-zuhause colord: device removed: xrandr-Hewlett Packard-HP w1907-3CQ81316B3
Sep 20 10:50:54 alle-zuhause nvidia-persistenced: Failed to unlink socket: No such file or directory
Sep 20 10:50:54 alle-zuhause nvidia-persistenced: Failed to unlink PID file: No such file or directory
Sep 20 10:50:54 alle-zuhause nvidia-persistenced: Shutdown (1324)
Sep 20 10:50:54 alle-zuhause kernel: [  659.660399] init: lightdm main process (1300) terminated with status 1
Sep 20 10:50:59 alle-zuhause acpid: client 1312[0:0] has disconnected
Sep 20 10:51:01 alle-zuhause kernel: [  666.654163] SysRq : This sysrq operation is disabled.
Sep 20 10:51:09 alle-zuhause kernel: [  674.808879] SysRq : This sysrq operation is disabled.

P.S. Ich bezweifle ernsthaft, ob ich das da oben jemals verstehen würde o.O

Cruiz Team-Icon

Avatar von Cruiz

Anmeldungsdatum:
6. März 2014

Beiträge: 5557

Nach dem Log hast du eine NVIDIA-Karte im Einsatz. Bitte einmal die genaue Karte und den verwendeten Treiber:

1
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 

dongxi

(Themenstarter)
Avatar von dongxi

Anmeldungsdatum:
23. August 2006

Beiträge: 409

Guten Abend,

lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 

sagt:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF106 [GeForce GTS 450] [10de:0dc4] (rev a1)
        Subsystem: CardExpert Technology Device [10b0:0401]
        Kernel driver in use: nvidia
Antworten |