staging.inyokaproject.org

Hallo ich habe drei Rechner umgestellt auf 10.04. Klappt alles hervorragend. Bei einem allerdings habe ich ein falsches Symbol für die aktive Funknetzverbindung. Diese zeigt "nicht verbunden" an obwohl mein Wlan klappt. Auch andere Themen bringen keine Abhilfe. Kann man das irgendwo manuell ändern?

Danke

Ich habe das selbe Problem. Ich habe alle dazugehörige software deinstalliert und reinstalliert alle Treiber deinstalliert und neu installiert das ganze ubuntu neuinstalliert aber das symbol zeigt trotz super schneller w- lan verbindung zeift das funknetzwerksymbol immer ein rotes aussruffezeichen wenn man drauf hovert zeigt es 100% an ... was mache ich falsch ???

Hallo, was ergeben denn die ifconfig bzw. iwconfig? ich hatte nämlich vor kurzem ein ähnliches Problem!

Gleiches hier, falsches Icon, aber Verbindung passt, IPs, Verschlüsselung, usw... alles ok ....

Hat wer eine Idee?

Hab das Netbook grade ned zur Hand, kann später eine Ausgabe von ifconfig und iwconfig machen....

lg EarlGrey2

eth0      Link encap:Ethernet  Hardware Adresse 70:5a:b6:1b:48:f5  
          UP BROADCAST MULTICAST  MTU:1500  Metrik:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:29 

eth1      Link encap:Ethernet  Hardware Adresse c4:17:fe:39:21:88  
          inet Adresse:192.168.1.2  Bcast:192.168.1.255  Maske:255.255.255.0
          inet6-Adresse: fe80::c617:feff:fe39:2188/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:2596 errors:0 dropped:0 overruns:0 frame:325
          TX packets:2277 errors:6 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:2332348 (2.3 MB)  TX bytes:468045 (468.0 KB)
          Interrupt:16 

lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metrik:1
          RX packets:22453 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22453 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0 
          RX bytes:652637 (652.6 KB)  TX bytes:652637 (652.6 KB)
   

lo        no wireless extensions.

eth0      no wireless extensions.

eth1      IEEE 802.11  Access Point: Not-Associated   
          Link Quality:5  Signal level:208  Noise level:166
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

pan0      no wireless extensions.

Hallo,
wie sieht denn die Datei interfaces aus?

auto lo iface lo inet loopback

Ok, der Manager sollte die Schnittselle also verwalten. Überprüfe mal das Syslog auf Fehlermeldungen

cat /var/log/syslog | egrep 'Manager|eth1'

Hast du schon mal versucht einfach den service networking und den networkmanager neu zu starten, es hilft bei mir gegen Probleme bei der Verbindung fast immer.

corradi@corradi-laptop:~$ cat /var/log/syslog | egrep 'Manager|eth1'

Jul 28 08:38:48 corradi-laptop kernel: [   15.031890] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 
Jul 28 08:38:48 corradi-laptop kernel: [   15.174305] type=1505 audit(1280299127.896:3):  operation="profile_load" pid=668 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  starting...
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  Trying to start the modem-manager...
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: init!
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth1, iface: eth1)
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth1, iface: eth1): no ifupdown configuration found.
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/eth0, iface: eth0)
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: end _init.
Jul 28 08:38:48 corradi-laptop NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Jul 28 08:38:48 corradi-laptop NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  WiFi enabled by radio killswitch; enabled by state file
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  WWAN enabled by radio killswitch; enabled by state file
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: (151408880) ... get_connections.
Jul 28 08:38:48 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: (151408880) ... get_connections (managed=false): return empty list.
Jul 28 08:38:48 corradi-laptop NetworkManager:    Ifupdown: get unmanaged devices count: 0
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): driver supports SSID scans (scan_capa 0x01).
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): new 802.11 WiFi device (driver: 'wl')
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): exported as /org/freedesktop/NetworkManager/Devices/0
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): now managed
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): device state change: 1 -> 2 (reason 2)
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): bringing up device.
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): preparing device.
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): deactivating device (reason: 2).
Jul 28 08:38:48 corradi-laptop NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): carrier is OFF
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): new Ethernet device (driver: 'atl1c')
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): now managed
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): bringing up device.
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): preparing device.
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Jul 28 08:38:48 corradi-laptop NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/eth0
Jul 28 08:38:48 corradi-laptop NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  modem-manager is now available
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  Trying to start the supplicant...
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): supplicant manager state:  down -> idle
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): device state change: 2 -> 3 (reason 0)
Jul 28 08:38:48 corradi-laptop kernel: [   16.057999] type=1505 audit(1280299128.780:6):  operation="profile_replace" pid=780 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Jul 28 08:38:48 corradi-laptop NetworkManager: <info>  (eth1): supplicant interface state:  starting -> ready
Jul 28 08:38:49 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/pan0, iface: pan0)
Jul 28 08:38:49 corradi-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/pan0, iface: pan0): no ifupdown configuration found.
Jul 28 08:38:49 corradi-laptop NetworkManager: <WARN>  device_creator(): /sys/devices/virtual/net/pan0: couldn't determine device driver; ignoring...
Jul 28 08:38:50 corradi-laptop avahi-daemon[743]: Registering new address record for fe80::c617:feff:fe39:2188 on eth1.*.
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) starting connection 'Auto Corradi-Power-Lan'
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  (eth1): device state change: 3 -> 4 (reason 0)
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  (eth1): device state change: 4 -> 5 (reason 0)
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1/wireless): access point 'Auto Corradi-Power-Lan' has security, but secrets are required.
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  (eth1): device state change: 5 -> 6 (reason 0)
Jul 28 08:38:55 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Jul 28 08:38:58 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  scanning -> inactive
Jul 28 08:38:59 corradi-laptop kernel: [   26.768046] eth1: no IPv6 routers present
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  (eth1): device state change: 6 -> 4 (reason 0)
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  (eth1): device state change: 4 -> 5 (reason 0)
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1/wireless): connection 'Auto Corradi-Power-Lan' has security, and secrets exist.  No new secrets needed.
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Config: added 'ssid' value 'Corradi-Power-Lan'
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Jul 28 08:39:32 corradi-laptop NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Jul 28 08:39:32 corradi-laptop NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  Config: set interface ap_scan to 1
Jul 28 08:39:32 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  inactive -> scanning
Jul 28 08:39:37 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  scanning -> associating
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  associating -> associated
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  associated -> 4-way handshake
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  4-way handshake -> group handshake
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  (eth1): supplicant connection state:  group handshake -> completed
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Corradi-Power-Lan'.
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  (eth1): device state change: 5 -> 7 (reason 0)
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds)
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  dhclient started with pid 1388
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled...
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started...
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete.
Jul 28 08:39:38 corradi-laptop NetworkManager: <info>  DHCP: device eth1 state changed (null) -> preinit
Jul 28 08:39:38 corradi-laptop dhclient: Listening on LPF/eth1/c4:17:fe:39:21:88
Jul 28 08:39:38 corradi-laptop dhclient: Sending on   LPF/eth1/c4:17:fe:39:21:88
Jul 28 08:39:40 corradi-laptop dhclient: DHCPREQUEST of 192.168.1.2 on eth1 to 255.255.255.255 port 67
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>  DHCP: device eth1 state changed preinit -> reboot
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started...
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>    address 192.168.1.2
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>    prefix 24 (255.255.255.0)
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>    gateway 192.168.1.1
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>    nameserver '192.168.1.1'
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled...
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete.
Jul 28 08:39:40 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) started...
Jul 28 08:39:40 corradi-laptop avahi-daemon[743]: Joining mDNS multicast group on interface eth1.IPv4 with address 192.168.1.2.
Jul 28 08:39:40 corradi-laptop avahi-daemon[743]: New relevant interface eth1.IPv4 for mDNS.
Jul 28 08:39:40 corradi-laptop avahi-daemon[743]: Registering new address record for 192.168.1.2 on eth1.IPv4.
Jul 28 08:39:41 corradi-laptop NetworkManager: <info>  (eth1): device state change: 7 -> 8 (reason 0)
Jul 28 08:39:41 corradi-laptop NetworkManager: <debug> [1280299181.032150] periodic_update(): Roamed from BSSID C0:3F:0E:68:06:EA (Corradi-Power-Lan) to (none) ((none))
Jul 28 08:39:41 corradi-laptop NetworkManager: <info>  Policy set 'Auto Corradi-Power-Lan' (eth1) as default for routing and DNS.
Jul 28 08:39:41 corradi-laptop NetworkManager: <info>  Activation (eth1) successful, device activated.
Jul 28 08:39:41 corradi-laptop NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
Jul 28 13:27:33 corradi-laptop NetworkManager: bluez_manager_bdaddr_removed_cb: assertion `bdaddr != NULL' failed
Jul 28 13:27:41 corradi-laptop NetworkManager: bluez_manager_bdaddr_removed_cb: assertion `bdaddr != NULL' failed
Jul 28 13:28:10 corradi-laptop NetworkManager: bluez_manager_bdaddr_removed_cb: assertion `bdaddr != NULL' failed

das ist ziemlich vie text ich versteh nur bahnhof

Keine Fehler. Vermutlich wurde bei dem Upgrade eine ältere Konfiguration übernommen. Lösche mal unter System > Einstellungen > Netzwerkverbindungen > Reiter "Funknetzwerk" den betreffenden Eintrag und verbinde neu.

Habe dies schon mehrmals getan das problem wurde nicht behoben

Entstanden ist dieses problem tatsächlich nach einem update seither habe ich den computer komplet neu installiert mit formatieren windows installiert (da ist alles normal ) und danach wieder linux das ausruffezeichen ist immer noch da treiber sind auch nach der 3 neuinstalation noch die selben habe sogar alle packete aufgeschrieben und verglichen da gibt es keine differenz alle treiber und software für wlan netzwerk und co habe ich rasch deinstalliert und reinstalliert keinne änderung

So, ich hab auch Neuigkeiten, also:

- bei beiden WLANs funktioniert das Verbinden etc... tadellos, es geht nur ums Icon.

WLAN 1 Icon ist das mit 2x PC und weisses Kreuzerl auf rotem Grund, also so wie abgestecktes Patchkabel WPA2, schon x-Mal aus den Verbindungen eliminiert und neu verbunden AP ist ein lancom

WLAN 2 Icon so wie es sein soll, die 4 senkrechten unterschiedlich langen Balken, WPA2, gestern mal neu angelegt, alles ok AP ist ein Linksys

Sehr seltsame Sache ....

@mods: habe eine funktionstüchtige Tastatur, aber die rechte Hand samt Unterarm im Gips, 1-Hand-Tippseln ist echt nervend...

das ist sehr warscheindlich soo denn ich habe auch noch einen neuen rooter installiert und bei dem ist es das selbe habe jedoch immer nur eine w lan verbindung