ditsch schrieb:
Komisch, das sieht mir eher so aus, als ob das Kabel nen Hau hätte, da das Log keinen Hinweis dazu gibt, dass der Treiber eine Fehlfunktion hätte (außer sie wurde von dir rausgeschnitten) und die Karte ja erkannt wurde.
nein, das Kabel ist o.k.
Ich habe es jetzt wieder und wieder getestet:
Jaunty Kernel gebootet - kein Netzwerk
eigener Kernel gebootet - Netzwerk sofort da
hier noch die komplette dmesg nach dem Booten
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xbfef0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfef0000 (usable)
[ 0.000000] modified: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfef3000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378be000 - 37fefe1d
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb2e1d
[ 0.000000] Move RAMDISK from 00000000378be000 - 0000000037fefe1c to 00881000 - 00fb2e1c
[ 0.000000] ACPI: RSDP 000F7640, 0024 (r2 Nvidia)
[ 0.000000] ACPI: XSDT BFEF3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP BFEF9D80, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT BFEF3280, 6AC0 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS BFEF0000, 0040
[ 0.000000] ACPI: SSDT BFEF9F80, 028A (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: HPET BFEFA280, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG BFEFA300, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC BFEF9EC0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2186MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb2e1d] NEW RAMDISK ==> [0000881000 - 0000fb2e1d]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f5ab0] 000f5ab0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bfef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfef0
[ 0.000000] On node 0 totalpages: 786047
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4374 pages used for memmap
[ 0.000000] HighMem zone: 555484 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779905
[ 0.000000] Kernel command line: root=UUID=b8a0d074-e3f3-45b2-8a4b-7ffcd014e6fa ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2505.403 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 15722880 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 3087292k/3144640k available (4126k kernel code, 55956k reserved, 2208k data, 532k init, 2239432k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5010.80 BogoMIPS (lpj=10021612)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.004000] ACPI: Core revision 20080926
[ 0.005154] ACPI: Checking initramfs for custom DSDT
[ 0.232600] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.273560] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
[ 0.276001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5010.47 BogoMIPS (lpj=10020958)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.360191] CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
[ 0.360236] Brought up 2 CPUs
[ 0.360238] Total of 2 processors activated (10021.28 BogoMIPS).
[ 0.360235] System has AMD C1E enabled
[ 0.360235] Switch to broadcast mode on CPU1
[ 0.360345] CPU0 attaching sched-domain:
[ 0.360347] domain 0: span 0-1 level CPU
[ 0.360349] groups: 0 1
[ 0.360354] CPU1 attaching sched-domain:
[ 0.360355] domain 0: span 0-1 level CPU
[ 0.360357] groups: 1 0
[ 0.360410] Switch to broadcast mode on CPU0
[ 0.360410] net_namespace: 776 bytes
[ 0.360410] Booting paravirtualized kernel on bare hardware
[ 0.360410] Time: 8:28:04 Date: 04/23/09
[ 0.360410] regulator: core version 0.5
[ 0.360410] NET: Registered protocol family 16
[ 0.360410] EISA bus registered
[ 0.360410] ACPI: bus type pci registered
[ 0.360410] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.360410] PCI: MCFG area at e0000000 reserved in E820
[ 0.360410] PCI: Using MMCONFIG for extended config space
[ 0.360410] PCI: Using configuration type 1 for base access
[ 0.360841] ACPI: EC: Look up EC in DSDT
[ 0.371118] ACPI: Interpreter enabled
[ 0.371121] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.371140] ACPI: Using IOAPIC for interrupt routing
[ 0.379786] ACPI: No dock devices found.
[ 0.379795] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.379980] pci 0000:00:05.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.379985] pci 0000:00:05.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.379989] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.380004] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.380199] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f]
[ 0.380204] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f]
[ 0.380216] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.380222] pci 0000:00:0a.1: PME# disabled
[ 0.380277] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.380297] pci 0000:00:0b.0: supports D1 D2
[ 0.380299] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.380302] pci 0000:00:0b.0: PME# disabled
[ 0.380324] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.380344] pci 0000:00:0b.1: supports D1 D2
[ 0.380345] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.380348] pci 0000:00:0b.1: PME# disabled
[ 0.380380] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f]
[ 0.380412] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.380416] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.380420] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.380424] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.380428] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
[ 0.380432] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.380464] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.380468] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.380472] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
[ 0.380475] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
[ 0.380479] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f]
[ 0.380483] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.380542] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
[ 0.380562] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.380566] pci 0000:00:10.1: PME# disabled
[ 0.380594] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.380598] pci 0000:00:14.0: reg 14 io port: [0xc800-0xc807]
[ 0.380614] pci 0000:00:14.0: supports D1 D2
[ 0.380615] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.380618] pci 0000:00:14.0: PME# disabled
[ 0.380701] pci 0000:01:05.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff]
[ 0.380706] pci 0000:01:05.0: reg 14 32bit mmio: [0xfddf8000-0xfddfbfff]
[ 0.380732] pci 0000:01:05.0: supports D1 D2
[ 0.380733] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.380736] pci 0000:01:05.0: PME# disabled
[ 0.380755] pci 0000:01:09.0: reg 10 io port: [0xbc00-0xbcff]
[ 0.380760] pci 0000:01:09.0: reg 14 32bit mmio: [0xfddfe000-0xfddfe0ff]
[ 0.380766] pci 0000:01:09.0: reg 18 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.380781] pci 0000:01:09.0: reg 30 32bit mmio: [0xfdde0000-0xfddeffff]
[ 0.380807] pci 0000:00:10.0: transparent bridge
[ 0.380810] pci 0000:00:10.0: bridge io port: [0xb000-0xbfff]
[ 0.380813] pci 0000:00:10.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.380816] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.380821] bus 00 -> node 0
[ 0.380826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.381127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.433876] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.434036] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 0.434197] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.434358] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[ 0.434515] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.434672] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.434830] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.434987] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.435145] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.435302] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.435461] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[ 0.435618] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.435776] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.435933] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.436101] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.436260] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.436418] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.436575] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.436734] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.436892] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.437083] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.437277] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.437463] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.437650] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.437836] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.438023] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.438209] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.438395] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.438582] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.438769] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.438957] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.439145] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.439332] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.439520] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.439708] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.439896] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.440094] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.440282] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.440470] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.440658] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.440846] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.440977] ACPI: WMI: Mapper loaded
[ 0.441029] SCSI subsystem initialized
[ 0.441029] libata version 3.00 loaded.
[ 0.441029] usbcore: registered new interface driver usbfs
[ 0.441029] usbcore: registered new interface driver hub
[ 0.441029] usbcore: registered new device driver usb
[ 0.441029] PCI: Using ACPI for IRQ routing
[ 0.444011] Bluetooth: Core ver 2.13
[ 0.444024] NET: Registered protocol family 31
[ 0.444024] Bluetooth: HCI device and connection manager initialized
[ 0.444024] Bluetooth: HCI socket layer initialized
[ 0.444024] NET: Registered protocol family 8
[ 0.444024] NET: Registered protocol family 20
[ 0.444027] NetLabel: Initializing
[ 0.444028] NetLabel: domain hash size = 128
[ 0.444030] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.444041] NetLabel: unlabeled traffic allowed by default
[ 0.444055] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.444059] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.452059] AppArmor: AppArmor Filesystem Enabled
[ 0.456022] Switched to high resolution mode on CPU 0
[ 0.456031] pnp: PnP ACPI init
[ 0.456035] Switched to high resolution mode on CPU 1
[ 0.456043] ACPI: bus type pnp registered
[ 0.461257] pnp: PnP ACPI: found 14 devices
[ 0.461258] ACPI: ACPI bus type pnp unregistered
[ 0.461261] PnPBIOS: Disabled by ACPI PNP
[ 0.461269] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.461271] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.461273] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.461275] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.461277] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.461279] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.461281] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.461284] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.461286] system 00:01: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.461291] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.461293] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.461295] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.461302] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.461307] system 00:0d: iomem range 0xd7600-0xd7fff has been reserved
[ 0.461310] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.461312] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.461314] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.461317] system 00:0d: iomem range 0xfefff000-0xfefff0ff has been reserved
[ 0.461319] system 00:0d: iomem range 0xbfef0000-0xbfefffff could not be reserved
[ 0.461322] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.461324] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.461326] system 00:0d: iomem range 0x100000-0xbfeeffff could not be reserved
[ 0.461329] system 00:0d: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.461331] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.461334] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.461336] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.461339] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.461341] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.461344] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.496026] pci 0000:00:10.0: PCI bridge, secondary bus 0000:01
[ 0.496028] pci 0000:00:10.0: IO window: 0xb000-0xbfff
[ 0.496032] pci 0000:00:10.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.496035] pci 0000:00:10.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.496043] pci 0000:00:10.0: setting latency timer to 64
[ 0.496046] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.496048] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.496050] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 0.496051] bus: 01 index 1 mmio: [0xfdd00000-0xfddfffff]
[ 0.496053] bus: 01 index 2 mmio: [0xfde00000-0xfdefffff]
[ 0.496055] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.496056] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.496065] NET: Registered protocol family 2
[ 0.501515] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.501740] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.502218] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.502452] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.502454] TCP reno registered
[ 0.504462] NET: Registered protocol family 1
[ 0.504562] checking if image is initramfs... it is
[ 0.968457] Freeing initrd memory: 7367k freed
[ 0.968617] cpufreq: No nForce2 chipset.
[ 0.968718] audit: initializing netlink socket (disabled)
[ 0.968734] type=2000 audit(1240475284.968:1): initialized
[ 0.975173] highmem bounce pool size: 64 pages
[ 0.975177] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.976188] VFS: Disk quotas dquot_6.5.1
[ 0.976230] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.976712] fuse init (API version 7.10)
[ 0.976773] msgmni has been set to 1672
[ 0.976946] alg: No test for stdrng (krng)
[ 0.976955] io scheduler noop registered
[ 0.976957] io scheduler anticipatory registered
[ 0.976959] io scheduler deadline registered
[ 0.976971] io scheduler cfq registered (default)
[ 0.976983] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.977030] pci 0000:00:05.0: Boot video device
[ 0.977051] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.993333] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.993344] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.993352] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.993363] pci 0000:00:10.1: Enabling HT MSI Mapping
[ 1.000357] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.000363] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.000485] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.000487] ACPI: Power Button (FF) [PWRF]
[ 1.000521] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.000522] ACPI: Power Button (CM) [PWRB]
[ 1.000571] fan PNP0C0B:00: registered as cooling_device0
[ 1.000575] ACPI: Fan [FAN] (on)
[ 1.000814] ACPI: processor limited to max C-state 1
[ 1.000827] processor ACPI_CPU:00: registered as cooling_device1
[ 1.000855] processor ACPI_CPU:01: registered as cooling_device2
[ 1.005374] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.005721] ACPI: Thermal Zone [THRM] (40 C)
[ 1.005765] isapnp: Scanning for PnP cards...
[ 1.358554] isapnp: No Plug & Play device found
[ 1.360316] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.360411] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.360504] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.360744] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.360863] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.361439] brd: module loaded
[ 1.361673] loop: module loaded
[ 1.361727] Fixed MDIO Bus: probed
[ 1.361731] PPP generic driver version 2.4.2
[ 1.361780] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.361802] Driver 'sd' needs updating - please use bus_type methods
[ 1.361809] Driver 'sr' needs updating - please use bus_type methods
[ 1.361966] sata_nv 0000:00:0e.0: version 3.5
[ 1.362278] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.362288] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.362291] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.362343] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.362478] scsi0 : sata_nv
[ 1.362561] scsi1 : sata_nv
[ 1.362698] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 1.362700] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.240170] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.436239] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168
[ 2.436243] ata1.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 2.436245] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.482342] ata1.00: configured for UDMA/133
[ 3.360142] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.368231] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 3.384303] ata2.00: configured for UDMA/100
[ 3.494016] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 3.494096] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.494109] sd 0:0:0:0: [sda] Write Protect is off
[ 3.494111] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.494131] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.494186] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.494197] sd 0:0:0:0: [sda] Write Protect is off
[ 3.494199] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.494217] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.494220] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.552408] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.552451] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.555690] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 3.887666] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.887669] Uniform CD-ROM driver Revision: 3.20
[ 3.887741] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.887769] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.888093] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 3.888103] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 3.888105] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 3.888147] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 3.888304] scsi2 : sata_nv
[ 3.888388] scsi3 : sata_nv
[ 3.888522] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 3.888525] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 4.622596] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.354751] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.354832] pata_amd 0000:00:0d.0: version 0.3.10
[ 5.354861] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 5.354941] scsi4 : pata_amd
[ 5.355001] scsi5 : pata_amd
[ 5.355514] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 5.355516] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 5.516650] ata5.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 5.516669] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 5.532409] ata5.00: configured for UDMA/33
[ 5.702694] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 5.712420] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 5.712489] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 5.712526] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 5.712931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.713246] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 5.713255] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 5.713270] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 5.713272] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 5.713319] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 5.713343] ehci_hcd 0000:00:0b.1: debug port 1
[ 5.713346] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 5.713364] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[ 5.724258] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 5.724319] usb usb1: configuration #1 chosen from 1 choice
[ 5.724340] hub 1-0:1.0: USB hub found
[ 5.724347] hub 1-0:1.0: 8 ports detected
[ 5.724437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.724729] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 5.724736] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 5.724745] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 5.724747] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 5.724784] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 5.724807] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
[ 5.782167] usb usb2: configuration #1 chosen from 1 choice
[ 5.782188] hub 2-0:1.0: USB hub found
[ 5.782196] hub 2-0:1.0: 8 ports detected
[ 5.782271] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.782319] usbcore: registered new interface driver libusual
[ 5.782345] usbcore: registered new interface driver usbserial
[ 5.782353] USB Serial support registered for generic
[ 5.782363] usbcore: registered new interface driver usbserial_generic
[ 5.782365] usbserial: USB Serial Driver core
[ 5.782399] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 5.782401] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.782474] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.784079] mice: PS/2 mouse device common for all mice
[ 5.789146] rtc_cmos 00:05: RTC can wake from S4
[ 5.789171] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 5.789207] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 5.789254] device-mapper: uevent: version 1.0.3
[ 5.789355] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.789528] device-mapper: multipath: version 1.0.5 loaded
[ 5.789531] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.789630] EISA: Probing bus 0 at eisa.0
[ 5.789638] Cannot allocate resource for EISA slot 2
[ 5.789642] Cannot allocate resource for EISA slot 4
[ 5.789654] EISA: Detected 0 cards.
[ 5.789770] cpuidle: using governor ladder
[ 5.789772] cpuidle: using governor menu
[ 5.790153] TCP cubic registered
[ 5.790231] NET: Registered protocol family 10
[ 5.790542] lo: Disabled Privacy Extensions
[ 5.790778] NET: Registered protocol family 17
[ 5.790791] Bluetooth: L2CAP ver 2.11
[ 5.790792] Bluetooth: L2CAP socket layer initialized
[ 5.790794] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.790796] Bluetooth: SCO socket layer initialized
[ 5.790846] Bluetooth: RFCOMM socket layer initialized
[ 5.790851] Bluetooth: RFCOMM TTY layer initialized
[ 5.790852] Bluetooth: RFCOMM ver 1.10
[ 5.790896] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e processors (2 cpu cores) (version 2.20.00)
[ 5.790951] powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0x10
[ 5.790953] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0x11
[ 5.790954] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x13
[ 5.790956] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x15
[ 5.790958] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x15
[ 5.790960] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x16
[ 5.791009] Using IPI No-Shortcut mode
[ 5.791082] registered taskstats version 1
[ 5.791199] Magic number: 5:488:473
[ 5.791288] rtc_cmos 00:05: setting system clock to 2009-04-23 08:28:10 UTC (1240475290)
[ 5.791291] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.791292] EDD information not available.
[ 5.791570] Freeing unused kernel memory: 532k freed
[ 5.791692] Write protecting the kernel text: 4128k
[ 5.791734] Write protecting the kernel read-only data: 1532k
[ 5.805940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 6.005322] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 6.005335] sym53c8xx 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 6.006435] sym0: <875> rev 0x4 at pci 0000:01:09.0 irq 17
[ 6.008135] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.008441] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 6.008444] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 6.008449] forcedeth 0000:00:14.0: setting latency timer to 64
[ 6.008480] nv_probe: set workaround bit for reversed mac addr
[ 6.028350] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 6.032012] sym0: SCSI BUS has been reset.
[ 6.034860] scsi6 : sym-2.2.3
[ 6.041022] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 6.057378] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 6.057390] ohci1394 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 6.107212] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.182696] usb 1-3: configuration #1 chosen from 1 choice
[ 6.182901] hub 1-3:1.0: USB hub found
[ 6.183278] hub 1-3:1.0: 4 ports detected
[ 6.458024] usb 1-3.4: new low speed USB device using ehci_hcd and address 3
[ 6.528814] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:a4:93:cc
[ 6.528818] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
[ 6.559830] usb 1-3.4: configuration #1 chosen from 1 choice
[ 6.568252] usbcore: registered new interface driver hiddev
[ 6.571379] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.4/1-3.4:1.0/input/input4
[ 6.601059] generic-usb 0003:046D:C046.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0b.1-3.4/input0
[ 6.601073] usbcore: registered new interface driver usbhid
[ 6.601075] usbhid: v2.6:USB HID core driver
[ 6.682352] PM: Starting manual resume from disk
[ 6.682356] PM: Resume from partition 8:3
[ 6.682358] PM: Checking hibernation image.
[ 6.683228] PM: Resume from disk failed.
[ 6.703524] kjournald starting. Commit interval 5 seconds
[ 6.703536] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.381122] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f1ff38]
[ 10.608247] udev: starting version 141
[ 10.728242] ACPI: I/O resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05]
[ 10.728246] ACPI: Device needs an ACPI driver
[ 10.728296] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 10.728329] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 10.802412] scsi 6:0:6:0: Scanner SCANNER 2.01 PQ: 0 ANSI: 1 CCS
[ 10.802427] scsi target6:0:6: Beginning Domain Validation
[ 10.844522] scsi target6:0:6: Ending Domain Validation
[ 10.897509] parport_pc 00:0a: reported by Plug and Play ACPI
[ 10.897538] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 10.921565] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.940375] parport0: Printer, Hewlett-Packard HP LaserJet 6L
[ 10.981518] ppdev: user-space parallel port driver
[ 11.573611] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 11.573617] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 11.573765] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 12.283747] lp0: using parport0 (interrupt-driven).
[ 12.367761] Adding 522104k swap on /dev/sda3. Priority:-1 extents:1 across:522104k
[ 12.900676] EXT3 FS on sda5, internal journal
[ 13.221136] scsi 6:0:6:0: Attached scsi generic sg3 type 6
[ 14.509177] kjournald starting. Commit interval 5 seconds
[ 14.510009] EXT3 FS on sda2, internal journal
[ 14.510015] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.548922] kjournald starting. Commit interval 5 seconds
[ 14.549769] EXT3 FS on sda7, internal journal
[ 14.549772] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.570440] kjournald starting. Commit interval 5 seconds
[ 14.571255] EXT3 FS on sda6, internal journal
[ 14.571258] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.007421] type=1505 audit(1240468099.712:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2140
[ 15.050433] type=1505 audit(1240468099.756:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2144
[ 15.050547] type=1505 audit(1240468099.756:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2144
[ 15.050591] type=1505 audit(1240468099.756:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2144
[ 15.050629] type=1505 audit(1240468099.756:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2144
[ 15.176206] type=1505 audit(1240468099.884:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2149
[ 15.176372] type=1505 audit(1240468099.884:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2149
[ 15.201431] type=1505 audit(1240468099.909:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2153
[ 15.885955] eth0: no link during initialization.
[ 15.886369] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.567109] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 54.567113] Bluetooth: BNEP filters: protocol multicast
[ 54.573247] Bridge firewalling registered
[ 56.691238] Linux agpgart interface v0.103
[ 56.706741] nvidia: module license 'NVIDIA' taints kernel.
[ 56.959711] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 56.959724] nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 56.959730] nvidia 0000:00:05.0: setting latency timer to 64
[ 56.960048] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 118.001024] Clocksource tsc unstable (delta = -300515929 ns)
