Ich habe in meinem Laptop (A7Vc Asus) eigentlich nur "Unknown Devices" in den Subsystems.
Da würde ich gerne die korrekten Bezeichnungen eintragen. Dazu muss man diese an http://pciids.sourceforge.net/
melden, aber ich weiß nicht so recht, wo ich da anfangen soll.
Kann mir jemand erklären wie man da am besten vorgeht?
Folgendes habe ich an pciids.sourceforge.net/ geschrieben, aber leider noch keine Antwort erhalten:
Hello, I have an A7Vc Notebook from ASUS (ASUSTeK Computer Inc.)
with a lot of "Unknown Devices" which looks like this:
...
03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Unknown device [8086:2701]
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at feafc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
...
So, I thought I could contribute to your database because I know very good
which components are in my notebook. But I'm really confused how to do it
because there are no good examples and a lot of strange things.
So, I tried to start at the only entry which is not an "Unknown device":
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: ASUSTeK Computer Inc. L8400B or L3C/S notebook [1043:1045]
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at d800 [size=256]
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
So I thought that I would find an ID 8139 in your Database which leads me to Realtek, where
I can add my Controller RTL8100CL to this ID. (* see complete data of the chip at end of this mail
But there is no ID in your Database at http://pci-ids.ucw.cz/iii/?p=8
Why?
In Windows it says in the DeviceManager/Geräteinstanzerkennung:
PCI\VEN_10EC&DEV_8139&SUBSYS_10451043&REV_10\4&F971712&0&00F0
\ \ \ \
8139 \ 1043 \ (rev 10)
1045
This is all the same as in the linux system, so it should be correct and
there should be an entry in your database. But where? I can't find it.
The next. The Subsystem is wrong for me because I have an A7Vc notebook.
But where can I add this information?
You see I'm stuck at the beginning.
Please help me. Where can I find more information about this topic?
-------------------------------------------------------------------------------------
(*
LAN REALTEK
Jack RJ-45
I/F PCI
Wake on LAN YES
Controller RTL8100CL
Treiberpack für RTL8169_8139_810x_663_0705 funktioniert.
Function features:
- PCI v2.3, 32-bit, 33/66-MHz, Fully compliant
with IEEE 802.3z, 10/100/1000 Mbps triple-speed
- Integrated PHY compliant to IEEE 802.3ab,
and 802.3z
- Energy Detect low-power mode, CLKRUN
support, Deep 64 KB RAM on-chip buffer
- Programmable cache line size
- TCP and UDP Checksum generation/checking
"on the fly"
- Interrupt moderation, Jumbo frame support
Vendor......: REALTEK
Parts Number: RTL8100CL
Package.....: 128-Pin LQFP