staging.inyokaproject.org

Hallo an die Spezialisten,

wie kann ich die Gesundheitsdaten einer SSD auslesen und würde sich die Daten dan bitte jemand anschauen? Es eilt ein wenig, über schnelle Hilfe würde ich mich sehr freuen ☺

Wie man sowas macht, ist hier im Wiki beschrieben.

Grundsätzlich läuft es darauf hinaus, dass du das Paket smartmontools installieren musst, damit du dir per sudo smartctl -A /dev/sdX die Werte aller Attribute anzeigen lassen kannst.

Okay, danke, soweit war ich schon. Trotz Update der Datei, wie im Wiki angegeben, wird die SanDisk U100 nicht erkannt.

"Uncorrectable ECC Errors: 2" wird in der Laufwerksverwaltung angezeigt, und der Long-Test läuft länger, als smartctl nach dem Start angezeigt hat.

Ich warte mal noch etwas und melde mich.

Nachtrag: hier die Ausgabe nach Beendigung.

ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-29-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SanDisk SSD U100 252GB
Serial Number:    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
LU WWN Device Id: 5 001b44 78541f787
Firmware Version: 10.51.02
User Capacity:    252.000.000.000 bytes [252 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ACS-2 revision 3
Local Time is:    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x51) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  24) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0002   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       3
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -       7
171 Unknown_Attribute       0x0002   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0002   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0002   100   100   000    Old_age   Always       -       0
174 Unknown_Attribute       0x0002   100   100   000    Old_age   Always       -       1
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -       0
230 Head_Amplitude          0x0002   100   100   000    Old_age   Always       -       0
232 Available_Reservd_Space 0x0003   100   100   005    Pre-fail  Always       -       0
234 Unknown_Attribute       0x0002   100   100   000    Old_age   Always       -       2
241 Total_LBAs_Written      0x0002   100   100   000    Old_age   Always       -       75594497
242 Total_LBAs_Read         0x0002   100   100   000    Old_age   Always       -       17093342

SMART Error Log Version: 1
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%         2         -
# 2  Short offline       Completed without error       00%         1         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Was davon ist wichtig? Warum finde ich die ECC-Fehler nicht im Report?

Ich pushe mal. Sorry, es eilt ein wenig.

Raubsau schrieb:

Ich pushe mal. Sorry, es eilt ein wenig.

Das ist ein Forum, kein Chat. Antworten können dauern, gute Antworten auch etwas länger.

▶ Richtig fragen