staging.inyokaproject.org

Guten Tag,

Habe eine interne festplatte in ein gehäuse mit zugehörigem netzteil gepackt und will diese jetzt als externe festplatte nutzen. adapter ist eine usb 3.0 pci karte. mitten im kopiervorgang (nach einigen minuten) bricht dieser ab, mit der fehlermeldung, dass das medium nur lesbar sei.Bis zu diesem zeitpunkt werden alle daten ordnungsgemäß kopiert...

habe schonmal neu partitioniert auf ext 4, aber das problem tritt weiterhin auf. vermute es handelt sich um ein automatisches unmounten. außerdem denke ich, es könnte mit der fstab konfiguration zusammenhängen, on der ich allein allerdings nicht unbedingt ahnung habe.also nun die frage: was kann ich tun ?

MfG und Danke !

es könnte mit der fstab konfiguration zusammenhängen, on der ich allein allerdings nicht unbedingt ahnung habe

Den Inhalt der /etc/fstab hier posten (im Codeblock formatiert), damit uns kundgetan wird, was du da produziert hast? 😉

Wir befinden uns hier in einem Deutschen Forum, in dem eben diese Rechtschreibregeln gelten. 🤓

Insbesondere Groß- und Kleinschreibung dient hier der besseren Verständlichkeit. siehe unten

Danke Bogenschütze!

Außerdem fährt das System solange nicht runter, bis die Platte ausgeschaltet wurde, und es gibt nachdem die Platte eingehängt wurde beim nächsten Systemstart eine Fehlermeldung, die ich natürlich artig melde.

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d402e9c4-383a-4b63-aefb-92b285b7fb81 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=2cb2a08a-b954-4686-a264-02b89e5a110b none            swap    sw              0       0

Hi,

hänge die Disk mal testweise an einen USB2-Port. Ich hatte auch schon solche Probleme mit inkompatiblen USB3 Geräten.

Viel Erfolg

Rainer

Hallo

Meiner Erfahrung nach ist USB 3 unzuverlässiger MIST. Manche kombinationen von Controller, Kabel und Festplattengehäuse laufen halbwegs zuverlässig, viele nicht.

Poste mal die Ausgabe von dmesg nach einem Fehler das sollte etwas Klarheit schaffen ob USB3 das Problem ist oder soch was anderes.

da1l6

huhu,

also jetzt hängt die platte an usb 2, und kopiert einen 35 gb ordner... statusmeldung folgt...

Der Fehler tritt nach ca. 5 Minuten (mit USB 2.0) erneut auf, nachdem ca. 1/3 der Daten kopiert worden sind. Eine Fehlermeldung erscheint: Das Dateisystem sei nur lesbar.

Die Ausgabe von dmesg:

[    5.342906] [drm] radeon: 1024M of GTT memory ready.
[    5.342916] [drm] Loading CAICOS Microcode
[    5.435272] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.436872] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    5.436958] Bluetooth: Core ver 2.17
[    5.436977] NET: Registered protocol family 31
[    5.436978] Bluetooth: HCI device and connection manager initialized
[    5.436986] Bluetooth: HCI socket layer initialized
[    5.436988] Bluetooth: L2CAP socket layer initialized
[    5.436991] Bluetooth: SCO socket layer initialized
[    5.439714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.439716] Bluetooth: BNEP filters: protocol multicast
[    5.439721] Bluetooth: BNEP socket layer initialized
[    5.447150] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[    5.448129] radeon 0000:01:00.0: WB enabled
[    5.448134] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8802229c5c00
[    5.448136] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8802229c5c0c
[    5.448229] Bluetooth: RFCOMM TTY layer initialized
[    5.448239] Bluetooth: RFCOMM socket layer initialized
[    5.448244] Bluetooth: RFCOMM ver 1.11
[    5.449582] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900117b2118
[    5.449771] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.449772] [drm] Driver supports precise vblank timestamp query.
[    5.449793] radeon 0000:01:00.0: irq 52 for MSI/MSI-X
[    5.449803] radeon 0000:01:00.0: radeon: using MSI.
[    5.449836] [drm] radeon: irq initialized.
[    5.452253] type=1400 audit(1422009679.499:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=616 comm="apparmor_parser"
[    5.452259] type=1400 audit(1422009679.499:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=616 comm="apparmor_parser"
[    5.452676] type=1400 audit(1422009679.499:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=616 comm="apparmor_parser"
[    5.466099] [drm] ring test on 0 succeeded in 2 usecs
[    5.466112] [drm] ring test on 3 succeeded in 1 usecs
[    5.505672] init: cups main process (618) killed by HUP signal
[    5.505681] init: cups main process ended, respawning
[    5.652427] [drm] ring test on 5 succeeded in 2 usecs
[    5.652436] [drm] UVD initialized successfully.
[    5.652515] [drm] Enabling audio 0 support
[    5.652560] HDMI ATI/AMD: no speaker allocation for ELD
[    5.652570] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.652624] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.664411] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[    5.724070] init: failsafe main process (644) killed by TERM signal
[    5.765597] init: samba-ad-dc main process (704) terminated with status 1
[    5.803811] [drm] ib test on ring 5 succeeded
[    5.804055] [drm] Radeon Display Connectors
[    5.804056] [drm] Connector 0:
[    5.804058] [drm]   HDMI-A-1
[    5.804059] [drm]   HPD2
[    5.804060] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    5.804061] [drm]   Encoders:
[    5.804062] [drm]     DFP1: INTERNAL_UNIPHY1
[    5.804063] [drm] Connector 1:
[    5.804064] [drm]   DVI-D-1
[    5.804064] [drm]   HPD4
[    5.804066] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    5.804066] [drm]   Encoders:
[    5.804067] [drm]     DFP2: INTERNAL_UNIPHY
[    5.804068] [drm] Connector 2:
[    5.804069] [drm]   VGA-1
[    5.804070] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    5.804071] [drm]   Encoders:
[    5.804072] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.804156] [drm] Internal thermal controller without fan control
[    5.809840] [drm] radeon: dpm initialized
[    5.886504] [drm] fb mappable at 0xD0474000
[    5.886506] [drm] vram apper at 0xD0000000
[    5.886507] [drm] size 8294400
[    5.886508] [drm] fb depth is 24
[    5.886509] [drm]    pitch is 7680
[    5.886577] fbcon: radeondrmfb (fb0) is primary device
[    5.948465] HDMI ATI/AMD: no speaker allocation for ELD
[    6.012310] Console: switching to colour frame buffer device 240x67
[    6.017971] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    6.017972] radeon 0000:01:00.0: registered panic notifier
[    6.017977] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[    6.028206] r8169 0000:04:00.0 eth0: link down
[    6.028365] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.028594] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.029714] r8169 0000:04:00.0 eth0: link down
[    6.248321] HDMI ATI/AMD: no speaker allocation for ELD
[    6.548108] HDMI ATI/AMD: no speaker allocation for ELD
[    6.852044] HDMI ATI/AMD: no speaker allocation for ELD
[    7.155799] HDMI ATI/AMD: no speaker allocation for ELD
[    7.307195] init: plymouth-upstart-bridge main process ended, respawning
[    7.314447] init: plymouth-upstart-bridge main process (1204) terminated with status 1
[    7.314458] init: plymouth-upstart-bridge main process ended, respawning
[    7.717530] 2:1:1: cannot get freq at ep 0x1
[    7.722415] 2:1:1: cannot get freq at ep 0x1
[    7.748524] 2:1:1: cannot get freq at ep 0x1
[    7.752522] 2:1:1: cannot get freq at ep 0x1
[    7.772519] 2:1:1: cannot get freq at ep 0x1
[    7.776516] 2:1:1: cannot get freq at ep 0x1
[    8.022571] r8169 0000:04:00.0 eth0: link up
[    8.022581] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.522595] audit_printk_skb: 153 callbacks suppressed
[   35.522599] type=1400 audit(1422009708.803:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1816 comm="apparmor_parser"
[   35.522605] type=1400 audit(1422009708.803:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1816 comm="apparmor_parser"
[   35.523011] type=1400 audit(1422009708.803:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1816 comm="apparmor_parser"
[  893.658359] 2:1:1: cannot get freq at ep 0x1
[  893.663473] 2:1:1: cannot get freq at ep 0x1
[  893.692332] 2:1:1: cannot get freq at ep 0x1
[  893.696486] 2:1:1: cannot get freq at ep 0x1
[  893.725312] 2:1:1: cannot get freq at ep 0x1
[  893.729320] 2:1:1: cannot get freq at ep 0x1
[ 1268.274132] 2:1:1: cannot get freq at ep 0x1
[ 1268.278127] 2:1:1: cannot get freq at ep 0x1
[ 1848.071141] systemd-hostnamed[2791]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1855.076328] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1855.209903] usb 2-3: New USB device found, idVendor=174c, idProduct=5136
[ 1855.209914] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1855.209921] usb 2-3: Product: AS2105
[ 1855.209927] usb 2-3: Manufacturer: ASMedia
[ 1855.209931] usb 2-3: SerialNumber: 00000000000000000000
[ 1855.233084] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1855.233244] scsi9 : usb-storage 2-3:1.0
[ 1855.233414] usbcore: registered new interface driver usb-storage
[ 1856.232365] scsi 9:0:0:0: Direct-Access     ASMT     2105             0    PQ: 0 ANSI: 6
[ 1856.233027] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 1868.966741] sd 9:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1868.967867] sd 9:0:0:0: [sdc] Write Protect is off
[ 1868.967880] sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 1868.968998] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1868.988395]  sdc: sdc1
[ 1869.015223] sd 9:0:0:0: [sdc] Attached SCSI disk
[ 1869.331699] EXT4-fs (sdc1): warning: mounting fs with errors, running e2fsck is recommended
[ 1869.370235] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 1897.814138] EXT4-fs (sdb2): mounting ext2 file system using the ext4 subsystem
[ 1898.242126] EXT4-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended
[ 1898.243955] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null)
[ 1922.252194] EXT4-fs (sda3): recovery complete
[ 1922.253830] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1925.999216] EXT4-fs (sdb1): recovery complete
[ 1925.999232] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1928.549002] EXT4-fs (sda2): recovery complete
[ 1928.551077] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1933.934389] EXT4-fs (sda5): recovery complete
[ 1933.935972] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1939.999257] type=1400 audit(1422011614.355:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3076 comm="apparmor_parser"
[ 1939.999264] type=1400 audit(1422011614.355:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3076 comm="apparmor_parser"
[ 1939.999672] type=1400 audit(1422011614.355:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3076 comm="apparmor_parser"
[ 1943.512717] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 1943.531675] EXT4-fs (sdb3): warning: mounting unchecked fs, running e2fsck is recommended
[ 1943.532042] EXT4-fs (sdb3): mounted filesystem without journal. Opts: (null)
[ 1955.355048] ata5.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[ 1955.355060] ata5.00: irq_stat 0x40000008
[ 1955.355069] ata5.00: failed command: READ FPDMA QUEUED
[ 1955.355084] ata5.00: cmd 60/08:b8:a8:a9:01/00:00:06:00:00/40 tag 23 ncq 4096 in
[ 1955.355084]          res 41/84:08:aa:a9:01/00:00:06:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 1955.355092] ata5.00: status: { DRDY ERR }
[ 1955.355096] ata5.00: error: { ICRC ABRT }
[ 1955.355105] ata5: hard resetting link
[ 1955.843377] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1955.920137] ata5.00: configured for UDMA/133
[ 1955.935329] ata5: EH complete
[ 2117.217885] init: smbd main process (667) killed by TERM signal
[ 2158.282991] init: samba-ad-dc main process (5575) terminated with status 1
[ 2169.902408] EXT4-fs (sdc1): error count since last fsck: 5
[ 2169.902433] EXT4-fs (sdc1): initial error at time 1421929374: ext4_reserve_inode_write:4880
[ 2169.902440] EXT4-fs (sdc1): last error at time 1421929375: ext4_journal_check_start:56
[ 2367.730358] 2:1:1: cannot get freq at ep 0x1
[ 2367.734340] 2:1:1: cannot get freq at ep 0x1
[ 2413.796897] systemd-hostnamed[5948]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2880.493181] INFO: task kworker/u12:3:150 blocked for more than 120 seconds.
[ 2880.493193]       Not tainted 3.13.0-40-generic #69-Ubuntu
[ 2880.493198] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2880.493203] kworker/u12:3   D ffff88022fcd4480     0   150      2 0x00000000
[ 2880.493220] Workqueue: writeback bdi_writeback_workfn (flush-8:32)
[ 2880.493226]  ffff8802203bb7d0 0000000000000046 ffff880220191800 ffff8802203bbfd8
[ 2880.493236]  0000000000014480 0000000000014480 ffff880220191800 ffff88022fcd4d18
[ 2880.493244]  ffff880220055870 ffff8802203150d0 ffff8802200558a0 ffff880220055870
[ 2880.493251] Call Trace:
[ 2880.493265]  [<ffffffff8172396d>] io_schedule+0x9d/0x140
[ 2880.493277]  [<ffffffff81338c55>] get_request+0x1a5/0x760
[ 2880.493287]  [<ffffffff810ab0a0>] ? prepare_to_wait_event+0x100/0x100
[ 2880.493297]  [<ffffffff8133ac85>] blk_queue_bio+0x85/0x360
[ 2880.493305]  [<ffffffff81336f52>] generic_make_request+0xc2/0x110
[ 2880.493312]  [<ffffffff81337011>] submit_bio+0x71/0x150
[ 2880.493321]  [<ffffffff8115a377>] ? __test_set_page_writeback+0x157/0x1b0
[ 2880.493331]  [<ffffffff812471f5>] ext4_io_submit+0x25/0x50
[ 2880.493339]  [<ffffffff812473a9>] ext4_bio_write_page+0x159/0x2e0
[ 2880.493347]  [<ffffffff8123e91d>] mpage_submit_page+0x5d/0x80
[ 2880.493354]  [<ffffffff8123ebd2>] mpage_map_and_submit_buffers+0x162/0x270
[ 2880.493363]  [<ffffffff81243a53>] ext4_writepages+0x693/0xd20
[ 2880.493373]  [<ffffffff8115b03e>] do_writepages+0x1e/0x40
[ 2880.493380]  [<ffffffff811e7000>] __writeback_single_inode+0x40/0x210
[ 2880.493386]  [<ffffffff811e7db7>] writeback_sb_inodes+0x247/0x3e0
[ 2880.493394]  [<ffffffff811e7fef>] __writeback_inodes_wb+0x9f/0xd0
[ 2880.493400]  [<ffffffff811e8263>] wb_writeback+0x243/0x2c0
[ 2880.493407]  [<ffffffff811e9b39>] bdi_writeback_workfn+0x1b9/0x430
[ 2880.493416]  [<ffffffff81083a52>] process_one_work+0x182/0x450
[ 2880.493424]  [<ffffffff81084841>] worker_thread+0x121/0x410
[ 2880.493432]  [<ffffffff81084720>] ? rescuer_thread+0x430/0x430
[ 2880.493439]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 2880.493446]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2880.493453]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 2880.493460]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2880.493516] INFO: task jbd2/sdc1-8:2816 blocked for more than 120 seconds.
[ 2880.493521]       Not tainted 3.13.0-40-generic #69-Ubuntu
[ 2880.493525] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2880.493528] jbd2/sdc1-8     D ffff88022fc94480     0  2816      2 0x00000000
[ 2880.493536]  ffff8802050cdbd8 0000000000000046 ffff880213954800 ffff8802050cdfd8
[ 2880.493543]  0000000000014480 0000000000014480 ffff880213954800 ffff88022fc94d18
[ 2880.493550]  ffff88022ffb27a8 0000000000000002 ffffffff811ef0e0 ffff8802050cdc50
[ 2880.493557] Call Trace:
[ 2880.493566]  [<ffffffff811ef0e0>] ? generic_block_bmap+0x50/0x50
[ 2880.493574]  [<ffffffff8172396d>] io_schedule+0x9d/0x140
[ 2880.493581]  [<ffffffff811ef0ee>] sleep_on_buffer+0xe/0x20
[ 2880.493589]  [<ffffffff81723df2>] __wait_on_bit+0x62/0x90
[ 2880.493597]  [<ffffffff811ef0e0>] ? generic_block_bmap+0x50/0x50
[ 2880.493604]  [<ffffffff81723e97>] out_of_line_wait_on_bit+0x77/0x90
[ 2880.493613]  [<ffffffff810ab0e0>] ? autoremove_wake_function+0x40/0x40
[ 2880.493621]  [<ffffffff811f041a>] __wait_on_buffer+0x2a/0x30
[ 2880.493630]  [<ffffffff81289bcd>] jbd2_journal_commit_transaction+0x185d/0x1ab0
[ 2880.493640]  [<ffffffff8107558f>] ? try_to_del_timer_sync+0x4f/0x70
[ 2880.493648]  [<ffffffff8128deed>] kjournald2+0xbd/0x250
[ 2880.493656]  [<ffffffff810ab0a0>] ? prepare_to_wait_event+0x100/0x100
[ 2880.493664]  [<ffffffff8128de30>] ? commit_timeout+0x10/0x10
[ 2880.493670]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 2880.493678]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2880.493684]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 2880.493691]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2880.493697] INFO: task ext4lazyinit:2818 blocked for more than 120 seconds.
[ 2880.493701]       Not tainted 3.13.0-40-generic #69-Ubuntu
[ 2880.493704] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2880.493708] ext4lazyinit    D ffff88022fcd4480     0  2818      2 0x00000000
[ 2880.493715]  ffff8802064f7b90 0000000000000046 ffff8802218b1800 ffff8802064f7fd8
[ 2880.493721]  0000000000014480 0000000000014480 ffff8802218b1800 ffff88022fcd4d18
[ 2880.493728]  ffff880220055870 ffff88021fd55f70 ffff8802200558a0 ffff880220055870
[ 2880.493734] Call Trace:
[ 2880.493743]  [<ffffffff8172396d>] io_schedule+0x9d/0x140
[ 2880.493751]  [<ffffffff81338c55>] get_request+0x1a5/0x760
[ 2880.493759]  [<ffffffff810ab0a0>] ? prepare_to_wait_event+0x100/0x100
[ 2880.493767]  [<ffffffff8133ac85>] blk_queue_bio+0x85/0x360
[ 2880.493775]  [<ffffffff81336f52>] generic_make_request+0xc2/0x110
[ 2880.493782]  [<ffffffff81337011>] submit_bio+0x71/0x150
[ 2880.493789]  [<ffffffff811f52a0>] ? bio_alloc_bioset+0x1c0/0x2a0
[ 2880.493797]  [<ffffffff813410ec>] __blkdev_issue_zeroout+0x13c/0x180
[ 2880.493805]  [<ffffffff81341219>] blkdev_issue_zeroout+0xe9/0xf0
[ 2880.493814]  [<ffffffff8126d36b>] ? __ext4_journal_get_write_access+0x3b/0x80
[ 2880.493821]  [<ffffffff8123decc>] ext4_init_inode_table+0x15c/0x390
[ 2880.493830]  [<ffffffff81255635>] ext4_lazyinit_thread+0x275/0x2f0
[ 2880.493838]  [<ffffffff812553c0>] ? ext4_unregister_li_request+0x60/0x60
[ 2880.493845]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 2880.493852]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2880.493859]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 2880.493866]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3000.425445] INFO: task kworker/u12:3:150 blocked for more than 120 seconds.
[ 3000.425457]       Not tainted 3.13.0-40-generic #69-Ubuntu
[ 3000.425462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3000.425467] kworker/u12:3   D ffff88022fcd4480     0   150      2 0x00000000
[ 3000.425484] Workqueue: writeback bdi_writeback_workfn (flush-8:32)
[ 3000.425490]  ffff8802203bb7d0 0000000000000046 ffff880220191800 ffff8802203bbfd8
[ 3000.425500]  0000000000014480 0000000000014480 ffff880220191800 ffff88022fcd4d18
[ 3000.425507]  ffff880220055870 ffff8802203150d0 ffff8802200558a0 ffff880220055870
[ 3000.425514] Call Trace:
[ 3000.425528]  [<ffffffff8172396d>] io_schedule+0x9d/0x140
[ 3000.425539]  [<ffffffff81338c55>] get_request+0x1a5/0x760
[ 3000.425550]  [<ffffffff810ab0a0>] ? prepare_to_wait_event+0x100/0x100
[ 3000.425559]  [<ffffffff8133ac85>] blk_queue_bio+0x85/0x360
[ 3000.425567]  [<ffffffff81336f52>] generic_make_request+0xc2/0x110
[ 3000.425575]  [<ffffffff81337011>] submit_bio+0x71/0x150
[ 3000.425583]  [<ffffffff8115a377>] ? __test_set_page_writeback+0x157/0x1b0
[ 3000.425593]  [<ffffffff812471f5>] ext4_io_submit+0x25/0x50
[ 3000.425601]  [<ffffffff812473a9>] ext4_bio_write_page+0x159/0x2e0
[ 3000.425609]  [<ffffffff8123e91d>] mpage_submit_page+0x5d/0x80
[ 3000.425616]  [<ffffffff8123ebd2>] mpage_map_and_submit_buffers+0x162/0x270
[ 3000.425625]  [<ffffffff81243a53>] ext4_writepages+0x693/0xd20
[ 3000.425635]  [<ffffffff8115b03e>] do_writepages+0x1e/0x40
[ 3000.425642]  [<ffffffff811e7000>] __writeback_single_inode+0x40/0x210
[ 3000.425648]  [<ffffffff811e7db7>] writeback_sb_inodes+0x247/0x3e0
[ 3000.425656]  [<ffffffff811e7fef>] __writeback_inodes_wb+0x9f/0xd0
[ 3000.425662]  [<ffffffff811e8263>] wb_writeback+0x243/0x2c0
[ 3000.425669]  [<ffffffff811e9b39>] bdi_writeback_workfn+0x1b9/0x430
[ 3000.425679]  [<ffffffff81083a52>] process_one_work+0x182/0x450
[ 3000.425686]  [<ffffffff81084841>] worker_thread+0x121/0x410
[ 3000.425694]  [<ffffffff81084720>] ? rescuer_thread+0x430/0x430
[ 3000.425701]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 3000.425708]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3000.425715]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 3000.425722]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3000.425779] INFO: task jbd2/sdc1-8:2816 blocked for more than 120 seconds.
[ 3000.425784]       Not tainted 3.13.0-40-generic #69-Ubuntu
[ 3000.425787] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3000.425791] jbd2/sdc1-8     D ffff88022fc94480     0  2816      2 0x00000000
[ 3000.425798]  ffff8802050cdbd8 0000000000000046 ffff880213954800 ffff8802050cdfd8
[ 3000.425806]  0000000000014480 0000000000014480 ffff880213954800 ffff88022fc94d18
[ 3000.425812]  ffff88022ffb27a8 0000000000000002 ffffffff811ef0e0 ffff8802050cdc50
[ 3000.425819] Call Trace:
[ 3000.425828]  [<ffffffff811ef0e0>] ? generic_block_bmap+0x50/0x50
[ 3000.425836]  [<ffffffff8172396d>] io_schedule+0x9d/0x140
[ 3000.425844]  [<ffffffff811ef0ee>] sleep_on_buffer+0xe/0x20
[ 3000.425851]  [<ffffffff81723df2>] __wait_on_bit+0x62/0x90
[ 3000.425859]  [<ffffffff811ef0e0>] ? generic_block_bmap+0x50/0x50
[ 3000.425867]  [<ffffffff81723e97>] out_of_line_wait_on_bit+0x77/0x90
[ 3000.425875]  [<ffffffff810ab0e0>] ? autoremove_wake_function+0x40/0x40
[ 3000.425883]  [<ffffffff811f041a>] __wait_on_buffer+0x2a/0x30
[ 3000.425892]  [<ffffffff81289bcd>] jbd2_journal_commit_transaction+0x185d/0x1ab0
[ 3000.425902]  [<ffffffff8107558f>] ? try_to_del_timer_sync+0x4f/0x70
[ 3000.425910]  [<ffffffff8128deed>] kjournald2+0xbd/0x250
[ 3000.425918]  [<ffffffff810ab0a0>] ? prepare_to_wait_event+0x100/0x100
[ 3000.425926]  [<ffffffff8128de30>] ? commit_timeout+0x10/0x10
[ 3000.425933]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 3000.425940]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3000.425946]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 3000.425953]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3000.425959] INFO: task ext4lazyinit:2818 blocked for more than 120 seconds.
[ 3000.425964]       Not tainted 3.13.0-40-generic #69-Ubuntu
[ 3000.425967] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3000.425970] ext4lazyinit    D ffff88022fcd4480     0  2818      2 0x00000000
[ 3000.425976]  ffff8802064f7b90 0000000000000046 ffff8802218b1800 ffff8802064f7fd8
[ 3000.425983]  0000000000014480 0000000000014480 ffff8802218b1800 ffff88022fcd4d18
[ 3000.425990]  ffff880220055870 ffff88021fd55f70 ffff8802200558a0 ffff880220055870
[ 3000.425996] Call Trace:
[ 3000.426005]  [<ffffffff8172396d>] io_schedule+0x9d/0x140
[ 3000.426012]  [<ffffffff81338c55>] get_request+0x1a5/0x760
[ 3000.426020]  [<ffffffff810ab0a0>] ? prepare_to_wait_event+0x100/0x100
[ 3000.426029]  [<ffffffff8133ac85>] blk_queue_bio+0x85/0x360
[ 3000.426036]  [<ffffffff81336f52>] generic_make_request+0xc2/0x110
[ 3000.426043]  [<ffffffff81337011>] submit_bio+0x71/0x150
[ 3000.426051]  [<ffffffff811f52a0>] ? bio_alloc_bioset+0x1c0/0x2a0
[ 3000.426059]  [<ffffffff813410ec>] __blkdev_issue_zeroout+0x13c/0x180
[ 3000.426067]  [<ffffffff81341219>] blkdev_issue_zeroout+0xe9/0xf0
[ 3000.426075]  [<ffffffff8126d36b>] ? __ext4_journal_get_write_access+0x3b/0x80
[ 3000.426083]  [<ffffffff8123decc>] ext4_init_inode_table+0x15c/0x390
[ 3000.426092]  [<ffffffff81255635>] ext4_lazyinit_thread+0x275/0x2f0
[ 3000.426100]  [<ffffffff812553c0>] ? ext4_unregister_li_request+0x60/0x60
[ 3000.426107]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 3000.426114]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3000.426120]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 3000.426127]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3040.720243] sd 9:0:0:0: timing out command, waited 360s
[ 3040.720263] end_request: I/O error, dev sdc, sector 1950623928
[ 3040.720304] Aborting journal on device sdc1-8.
[ 3040.838224] EXT4-fs error (device sdc1) in ext4_reserve_inode_write:4880: Journal has aborted
[ 3041.403790] ------------[ cut here ]------------
[ 3041.403810] WARNING: CPU: 0 PID: 2818 at /build/buildd/linux-3.13.0/fs/ext4/ext4_jbd2.c:259 __ext4_handle_dirty_metadata+0x1a2/0x1c0()
[ 3041.403815] Modules linked in: usb_storage autofs4 rfcomm bnep bluetooth radeon nfsd binfmt_misc auth_rpcgss nfs_acl nfs lockd sunrpc fscache snd_usb_audio joydev snd_usbmidi_lib kvm_amd kvm snd_hda_codec_hdmi serio_raw k10temp edac_core snd_hda_intel edac_mce_amd snd_hda_codec snd_hwdep snd_pcm sp5100_tco i2c_piix4 snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer ttm drm_kms_helper drm parport_pc snd ppdev asus_atk0110 lp parport i2c_algo_bit mac_hid wmi soundcore hid_generic usbhid hid pata_acpi r8169 psmouse mii firewire_ohci firewire_core crc_itu_t ahci pata_atiixp libahci pata_jmicron
[ 3041.403904] CPU: 0 PID: 2818 Comm: ext4lazyinit Not tainted 3.13.0-40-generic #69-Ubuntu
[ 3041.403910] Hardware name: System manufacturer System Product Name/M4A89GTD-PRO, BIOS 2101    04/08/2011
[ 3041.403915]  0000000000000009 ffff8802064f7d48 ffffffff8171f226 0000000000000000
[ 3041.403924]  ffff8802064f7d80 ffffffff810677cd ffff8800b8380e38 0000000000000000
[ 3041.403931]  ffff880221d77660 ffffffff8182dbb0 000000000000050f ffff8802064f7d90
[ 3041.403939] Call Trace:
[ 3041.403950]  [<ffffffff8171f226>] dump_stack+0x45/0x56
[ 3041.403959]  [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
[ 3041.403967]  [<ffffffff810678aa>] warn_slowpath_null+0x1a/0x20
[ 3041.403975]  [<ffffffff8126d7a2>] __ext4_handle_dirty_metadata+0x1a2/0x1c0
[ 3041.403983]  [<ffffffff81341219>] ? blkdev_issue_zeroout+0xe9/0xf0
[ 3041.403992]  [<ffffffff8123df9f>] ext4_init_inode_table+0x22f/0x390
[ 3041.404002]  [<ffffffff81255635>] ext4_lazyinit_thread+0x275/0x2f0
[ 3041.404010]  [<ffffffff812553c0>] ? ext4_unregister_li_request+0x60/0x60
[ 3041.404017]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 3041.404025]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3041.404032]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 3041.404039]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3041.404044] ---[ end trace 604035fe22e0519d ]---
[ 3041.404059] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[ 3041.404205] IP: [<ffffffff8125c581>] __ext4_error_inode+0x31/0x160
[ 3041.404314] PGD 0 
[ 3041.404354] Oops: 0000 [#1] SMP 
[ 3041.404547] EXT4-fs error (device sdc1): mpage_map_and_submit_extent:2276: comm kworker/u12:3: Failed to mark inode 115998849 dirty
[ 3041.405024] EXT4-fs error (device sdc1) in ext4_writepages:2567: Journal has aborted
[ 3041.404416] Modules linked in: usb_storage autofs4 rfcomm bnep bluetooth radeon nfsd binfmt_misc auth_rpcgss nfs_acl nfs lockd sunrpc fscache snd_usb_audio joydev snd_usbmidi_lib kvm_amd kvm snd_hda_codec_hdmi serio_raw k10temp edac_core snd_hda_intel edac_mce_amd snd_hda_codec snd_hwdep snd_pcm sp5100_tco i2c_piix4 snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer ttm drm_kms_helper drm parport_pc snd ppdev asus_atk0110 lp parport i2c_algo_bit mac_hid wmi soundcore hid_generic usbhid hid pata_acpi r8169 psmouse mii firewire_ohci firewire_core crc_itu_t ahci pata_atiixp libahci pata_jmicron
[ 3041.405871] CPU: 0 PID: 2818 Comm: ext4lazyinit Tainted: G        W     3.13.0-40-generic #69-Ubuntu
[ 3041.406017] Hardware name: System manufacturer System Product Name/M4A89GTD-PRO, BIOS 2101    04/08/2011
[ 3041.406177] task: ffff8802218b1800 ti: ffff8802064f6000 task.ti: ffff8802064f6000
[ 3041.406304] RIP: 0010:[<ffffffff8125c581>]  [<ffffffff8125c581>] __ext4_error_inode+0x31/0x160
[ 3041.406453] RSP: 0018:ffff8802064f7d00  EFLAGS: 00010286
[ 3041.406545] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000a
[ 3041.406667] EXT4-fs error (device sdc1): ext4_journal_check_start:56: Detected aborted journal
[ 3041.406676] RDX: 000000000000050f RSI: ffffffff81a6e3d1 RDI: 0000000000000000
[ 3041.406678] RBP: ffff8802064f7d90 R08: ffffffff81a78130 R09: 0000000000000000
[ 3041.406680] R10: 00000000ffffffe2 R11: ffff8802064f7a76 R12: 000000000000000a
[ 3041.406682] R13: ffffffff8182dbb0 R14: 000000000000050f R15: ffffffff81a78130
[ 3041.406686] FS:  00007fa0c3922700(0000) GS:ffff88022fc00000(0000) knlGS:0000000000000000
[ 3041.406688] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3041.406690] CR2: 0000000000000028 CR3: 000000020509f000 CR4: 00000000000007f0
[ 3041.406692] Stack:
[ 3041.406698]  ffff8802064f7d08 0000000000000103 604035fe22e0519d 0000000000000007
[ 3041.406702]  0000000000000006 0000000000000082 00000000000004ef ffff880221d77660
[ 3041.406707]  ffff8802064f7d90 ffffffff8126d2b2 ffffffff810677df ffff8800b8380e38
[ 3041.406707] Call Trace:
[ 3041.406714]  [<ffffffff8126d2b2>] ? ext4_journal_abort_handle+0x42/0xc0
[ 3041.406719]  [<ffffffff810677df>] ? warn_slowpath_common+0x8f/0xa0
[ 3041.406725]  [<ffffffff8126d70f>] __ext4_handle_dirty_metadata+0x10f/0x1c0
[ 3041.406730]  [<ffffffff8123df9f>] ext4_init_inode_table+0x22f/0x390
[ 3041.406736]  [<ffffffff81255635>] ext4_lazyinit_thread+0x275/0x2f0
[ 3041.406741]  [<ffffffff812553c0>] ? ext4_unregister_li_request+0x60/0x60
[ 3041.406745]  [<ffffffff8108b562>] kthread+0xd2/0xf0
[ 3041.406750]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3041.406754]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
[ 3041.406759]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
[ 3041.406794] Code: 48 89 e5 41 57 4d 89 c7 41 56 41 89 d6 41 55 49 89 f5 48 c7 c6 d1 e3 a6 81 41 54 49 89 cc 53 48 89 fb 48 83 ec 68 4c 89 4c 24 60 <48> 8b 47 28 48 8b 57 40 48 8b 80 f8 02 00 00 48 8b 40 68 89 90 
[ 3041.406798] RIP  [<ffffffff8125c581>] __ext4_error_inode+0x31/0x160
[ 3041.406800]  RSP <ffff8802064f7d00>
[ 3041.406801] CR2: 0000000000000028
[ 3041.409635] EXT4-fs (sdc1): Remounting filesystem read-only
[ 3041.410539] EXT4-fs (sdc1): ext4_writepages: jbd2_start: 1024 pages, ino 115998848; err -30
[ 3041.448980] ---[ end trace 604035fe22e0519e ]---
tobi@TobiRechner:~$ 

Mmmmhhh...

Jedenfalls kann ich (das hätte ich anfangs erwähnen sollen) nur dann auf der Platten arbeiten (kopieren, löschen ), wenn ich mit 'sudo nautilus' arbeite.... könnte das der timeout des sudo sein? Außerdem kann ich nach Auftreten des Fehlers gar nicht mehr auf die Platte zugreifen ... getestet mit gparted... eine ewig lange suchorgie startet: sdc wird durchsucht..... aber nichts geschieht.

könnte das der timeout des sudo sein?

nein, das gibt es meines Wissens nach nicht.

Wenn du nur mit sudo auf die Disk zugreifen kannst, ist das ein Rechteproblem (ggf. mountoptionen einstellen); das sollte mit der Übertragung aber nichts zu tun haben.

Wurde das System zwischenzeitlich mal rebootet (Kaltstart mit Power-off; alle Geräte inkl. USB Disk)? Ansonsten wären die Anschlüsse der Disk im USB Chassis zu prüfen und natürlich alle Kabel und Steckerverbindungen und das Netzteil (Wackelkontakte ausschließen).

Man kann natürlich einen Disk Defekt nicht ausschließen. Wahrscheinlich lässt der USB Controller aber kein Auslesen von SMART Werten zu? Das tun nur die wenigsten Geräte. Infos hier http://wiki.ubuntuusers.de/Festplattenstatus?redirect=no

hallo !

Also ein reboot gab es nicht. baue jetzt mal das gehäuse auseinander.... und such schonmal den kassenzettel : )

wenn ich mit 'sudo nautilus' arbeite....

Mir fehlen die Worte. 😲 Mit Rootrechten und Nautilus unterwegs und dann das grafische Programm auch noch mit dem falschen Befehl aufgerufen! Du kannst froh sein, wenn du dir nicht auch noch dein System dabei schrottest! Kopf-auf-der-Tischplatte-aufschlag-Icon.

Mach das NIE WIEDER! ❗

Wenn schon dann gksudo nautilus und auch nur in extremen Ausnahmefällen, wenns garnicht anders geht! siehe sudo

Das ist garnicht notwendig, wenn du die Rechte auf der externen Partition richtig setzen würdest!

Wenn du mit Gparted Partitionen anlegst, dann hat immer nur root die Berchtigung. Das läst sich aber ändern!

siehe dazu chown und chmod.

Weiterhin kannst du die Partition auch über einen Eintrag in der /etc/fstab in dein System einbinden und so die Berechtigung erlangen.

Bowman hat natürlich absolut recht wegen der "sudo" Thematik und Nautilus (Hatte ich glatt überlesen wegen dem USB Thema 😉 ).

Aussagekräftiger wäre es auch, den Kopiervorgang im Terminal auszuführen, schon allein um potentielle Probleme mit Nautilus auszuschließen und evt. auftretende Fehlermeldungen besser sehen zu können. Zudem rate ich bei USB Problemen immer zum Reboot mit Ausschalten dazwichen - also Kaltstart aller Komponenten. Wenn hier eine Komponente hängt, kann sie eben leicht den ganzen Bus herunterziehen.

Servus

Rainer

Hallo und

Danke. Für den sudo nautilus tip ... den ich natürlich hier im forum bekommen habe : ) Es ist wahrscheinlich so wie bei wikipedia, selber denken, wenn man die zeit hat. Habe mit chown alle Dateien unter media und mnt freigeben. Warum kann man sein System schrotten, wenn man mit sudo nautilus vorgeht, davon ganz abgesehen, dass es nervt?

UND: Habe die Platte aus dem Externgehäuse genommen, in den Rechner eingebaut, und alles scheint normal zu funktionieren. ICY BOX funktioniert nicht so gut, könnte man meinen. Ich danke Euch für die Zeit und Mühe!

BW soharius

Soll ich das Thema als ungelöst stehen lassen?

Achso etwas ist noch ziemlich schräg:

Die Partition heißt bei Gparted EXT I, unter media allerdings blöderweise EXT I1. Wie geht denn sowas ? Habe es unter Gparted EXT I genannt beim einrichten.

Dankesehr!

okay, dann wäre ja dein primäres Problem gelöst.

Und die Erklärung zu sudo / gksudo und den Dateimanagern findest du (wie immer) im Wiki (http://wiki.ubuntuusers.de/sudo und http://wiki.ubuntuusers.de/Rechte/Dateimanager).

Die Gefahr besteht einfach darin, dass man bei der geringsten Fehlbedienung Dateien unwiederbringlich löschen oder sonstige Schäden anrichten kann. Die Verwendung von "sudo" statt "gksudo" bei graphischen Programmen führt mit hoher Wahrscheinlichkeit zu Fehlfunktionen. Schau mal ob es in deinem Homeverzeichnis Dateien gibt (auch die versteckten Systemdateien) die nicht dir als owner sondern "root" gehören. Das sollte z.B. nicht sein und kann dann dazu fühen, dass du dich nicht mehr über das graphische Login am System anmelden kannst. Da gibts viele Beispiele dazu hier im Forum.

Servus

Rainer