Ist ja schon spannend ... GRUB akzeptiert die höhere Auflösung, GNOME/WAYLAND nicht!
Wie macht es denn Microsoft's Windows, dass es die Bildschirmauflösung durch den KVM-Switch erkennt? Das müsste doch mit Ubuntu auch möglich sein, oder?
Die eingefügten Schritte wurden die Zeilenende weggenommen (ist ja wirklich nicht lesbar), ich versuche, die nochmals einzufügen:
edid-decode ergab:
edid-decode edid.card0-VGA-1.bin
edid-decode (hex):
00 ff ff ff ff ff ff 00 04 69 c3 27 01 01 01 01
13 19 01 03 6c 3c 22 78 ea ee d5 a3 56 50 9f 26
10 50 54 af cf 80 71 4f 81 80 81 8f b3 00 81 40
95 00 a9 40 01 01 02 3a 80 18 71 38 2d 40 58 2c
45 00 56 50 21 00 00 1e 00 00 00 fd 00 38 4b 1e
53 0f 00 0a 20 20 20 20 20 20 00 00 00 fc 00 4d
58 32 37 39 0a 20 20 20 20 20 20 20 00 00 00 ff
00 46 35 4c 4d 52 53 30 30 32 30 37 30 0a 00 8d
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: ACI
Model: 10179
Serial Number: 16843009
Made in: week 19 of 2015
Basic Display Parameters & Features:
Analog display
Input voltage level: 0.7/0.7 V
Blank level equals black level
Sync: Separate Composite
Maximum image size: 60 cm x 34 cm
Gamma: 2.20
DPMS levels: Standby Suspend Off
RGB color display
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6396, 0.3378
Green: 0.3154, 0.6230
Blue : 0.1513, 0.0634
White: 0.3134, 0.3291
Established Timings I & II:
IBM : 720x400 70.082 Hz 9:5 31.467 kHz 28.320 MHz
DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz
DMT 0x05: 640x480 72.809 Hz 4:3 37.861 kHz 31.500 MHz
DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz
DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz
DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz
DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz
DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz
DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz
DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz
DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz
DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz
Apple : 1152x870 75.062 Hz 192:145 68.681 kHz 100.000 MHz
Standard Timings:
DMT 0x15: 1152x864 75.000 Hz 4:3 67.500 kHz 108.000 MHz
DMT 0x23: 1280x1024 60.020 Hz 5:4 63.981 kHz 108.000 MHz
DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz
DMT 0x3a: 1680x1050 59.954 Hz 16:10 65.290 kHz 146.250 MHz
DMT 0x20: 1280x960 60.000 Hz 4:3 60.000 kHz 108.000 MHz
DMT 0x2f: 1440x900 59.887 Hz 16:10 55.935 kHz 106.500 MHz
DMT 0x33: 1600x1200 60.000 Hz 4:3 75.000 kHz 162.000 MHz
Detailed Timing Descriptors:
DTD 1: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz (598 mm x 336 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
Display Range Limits:
Monitor ranges (GTF): 56-75 Hz V, 30-83 kHz H, max dotclock 150 MHz
Display Product Name: 'MX279'
Display Product Serial Number: 'F5LMRS002070'
Checksum: 0x8d
Die Zeile in /etc/default/grub folgendermassen abgeändert
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=VGA-1:D drm.edid_firmware=VGA-1:edid/edid.card0-VGA-1.bin"
Der Update von initramfs ergab eine Fehler:
sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-5.15.0-37-generic
rm: das Entfernen von '/lib/firmware/edid/edid.*.bin' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
cp: auf '/lib/firmware/edid/' konnte nicht zugegriffen werden: Datei oder Verzeichnis nicht gefunden
sudo update-grub
Sourcing file /etc/default/grub'
Sourcing file
/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.15.0-37-generic
Found initrd image: /boot/initrd.img-5.15.0-37-generic
Found linux image: /boot/vmlinuz-5.15.0-35-generic
Found initrd image: /boot/initrd.img-5.15.0-35-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done