Hallo zusammen, ich würde gerne meine NVME mittels nvme-cli sicher löschen und bin nach folgender Anleitung vorgegangen: http://forum.notebookreview.com/threads/secure-erase-hdds-ssds-sata-nvme-using-hdparm-nvme-cli-on-linux.827525/
Leider kommt im letzten Schritt:
sudo nvme format /dev/nvme0 --ses=1 Invalid namespace ID, specify a namespace to format or use '-n 0xffffffff' to format all namespaces on this controller.
Die Ausgabe von nvme id-ctrl -H /dev/nvme0 zeigt aber an, dass safe erase möglich ist?!?
NVME Identify Controller:
vid : 0x144d
ssvid : 0x144d
sn : S35FNA0K713921
mn : SAMSUNG MZVLW128HEGR-000L2
fr : 4L1QCXB7
rab : 2
ieee : 002538
cmic : 0
[3:3] : 0 ANA not supported
[2:2] : 0 PCI
[1:1] : 0 Single Controller
[0:0] : 0 Single Port
mdts : 0
cntlid : 0x2
ver : 0x10200
rtd3r : 0x186a0
rtd3e : 0x4c4b40
oaes : 0
[14:14] : 0 Endurance Group Event Aggregate Log Page Change Notice Not Supported
[13:13] : 0 LBA Status Information Notices Not Supported
[12:12] : 0 Predictable Latency Event Aggregate Log Change Notices Not Supported
[11:11] : 0 Asymmetric Namespace Access Change Notices Not Supported
[9:9] : 0 Firmware Activation Notices Not Supported
[8:8] : 0 Namespace Attribute Changed Event Not Supported
ctratt : 0
[9:9] : 0 UUID List Not Supported
[7:7] : 0 Namespace Granularity Not Supported
[5:5] : 0 Predictable Latency Mode Not Supported
[4:4] : 0 Endurance Groups Not Supported
[3:3] : 0 Read Recovery Levels Not Supported
[2:2] : 0 NVM Sets Not Supported
[1:1] : 0 Non-Operational Power State Permissive Not Supported
[0:0] : 0 128-bit Host Identifier Not Supported
rrls : 0
crdt1 : 0
crdt2 : 0
crdt3 : 0
oacs : 0x17
[9:9] : 0 Get LBA Status Capability Not Supported
[8:8] : 0 Doorbell Buffer Config Not Supported
[7:7] : 0 Virtualization Management Not Supported
[6:6] : 0 NVMe-MI Send and Receive Not Supported
[5:5] : 0 Directives Not Supported
[4:4] : 0x1 Device Self-test Supported
[3:3] : 0 NS Management and Attachment Not Supported
[2:2] : 0x1 FW Commit and Download Supported
[1:1] : 0x1 Format NVM Supported
[0:0] : 0x1 Security Send and Receive Supported
acl : 7
aerl : 3
frmw : 0x16
[4:4] : 0x1 Firmware Activate Without Reset Supported
[3:1] : 0x3 Number of Firmware Slots
[0:0] : 0 Firmware Slot 1 Read/Write
lpa : 0x3
[3:3] : 0 Telemetry host/controller initiated log page Not Supported
[2:2] : 0 Extended data for Get Log Page Not Supported
[1:1] : 0x1 Command Effects Log Page Supported
[0:0] : 0x1 SMART/Health Log Page per NS Supported
elpe : 63
npss : 4
avscc : 0x1
[0:0] : 0x1 Admin Vendor Specific Commands uses NVMe Format
apsta : 0x1
[0:0] : 0x1 Autonomous Power State Transitions Supported
wctemp : 342
cctemp : 345
mtfa : 0
hmpre : 0
hmmin : 0
tnvmcap : 128035676160
unvmcap : 0
rpmbs : 0
[31:24]: 0 Access Size
[23:16]: 0 Total Size
[5:3] : 0 Authentication Method
[2:0] : 0 Number of RPMB Units
edstt : 35
dsto : 0
fwug : 0
kas : 0
hctma : 0
[0:0] : 0 Host Controlled Thermal Management Not Supported
mntmt : 0
mxtmt : 0
sanicap : 0
[31:30] : 0 Additional media modification after sanitize operation completes successfully is not defined
[29:29] : 0 No-Deallocate After Sanitize bit in Sanitize command Supported
[2:2] : 0 Overwrite Sanitize Operation Not Supported
[1:1] : 0 Block Erase Sanitize Operation Not Supported
[0:0] : 0 Crypto Erase Sanitize Operation Not Supported
hmminds : 0
hmmaxd : 0
nsetidmax : 0
anatt : 0
anacap : 0
[7:7] : 0 Non-zero group ID Not Supported
[6:6] : 0 Group ID does not change
[4:4] : 0 ANA Change state Not Supported
[3:3] : 0 ANA Persistent Loss state Not Supported
[2:2] : 0 ANA Inaccessible state Not Supported
[1:1] : 0 ANA Non-optimized state Not Supported
[0:0] : 0 ANA Optimized state Not Supported
anagrpmax : 0
nanagrpid : 0
sqes : 0x66
[7:4] : 0x6 Max SQ Entry Size (64)
[3:0] : 0x6 Min SQ Entry Size (64)
cqes : 0x44
[7:4] : 0x4 Max CQ Entry Size (16)
[3:0] : 0x4 Min CQ Entry Size (16)
maxcmd : 0
nn : 1
oncs : 0x1f
[7:7] : 0 Verify Not Supported
[6:6] : 0 Timestamp Not Supported
[5:5] : 0 Reservations Not Supported
[4:4] : 0x1 Save and Select Supported
[3:3] : 0x1 Write Zeroes Supported
[2:2] : 0x1 Data Set Management Supported
[1:1] : 0x1 Write Uncorrectable Supported
[0:0] : 0x1 Compare Supported
fuses : 0
[0:0] : 0 Fused Compare and Write Not Supported
fna : 0
[2:2] : 0 Crypto Erase Not Supported as part of Secure Erase
[1:1] : 0 Crypto Erase Applies to Single Namespace(s)
[0:0] : 0 Format Applies to Single Namespace(s)
vwc : 0x1
[0:0] : 0x1 Volatile Write Cache Present
awun : 255
awupf : 0
nvscc : 1
[0:0] : 0x1 NVM Vendor Specific Commands uses NVMe Format
nwpc : 0
[2:2] : 0 Permanent Write Protect Not Supported
[1:1] : 0 Write Protect Until Power Supply Not Supported
[0:0] : 0 No Write Protect and Write Protect Namespace Not Supported
acwu : 0
sgls : 0
[1:0] : 0 Scatter-Gather Lists Not Supported
mnan : 0
subnqn :
ioccsz : 0
iorcsz : 0
icdoff : 0
ctrattr : 0
[0:0] : 0 Dynamic Controller Model
msdbd : 0
ps 0 : mp:7.60W operational enlat:0 exlat:0 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 1 : mp:6.00W operational enlat:0 exlat:0 rrt:1 rrl:1
rwt:1 rwl:1 idle_power:- active_power:-
ps 2 : mp:5.10W operational enlat:0 exlat:0 rrt:2 rrl:2
rwt:2 rwl:2 idle_power:- active_power:-
ps 3 : mp:0.0400W non-operational enlat:210 exlat:1500 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0050W non-operational enlat:2200 exlat:6000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-Kann ich auch einfach -n 0xffffffff aufrufen? Aber damit werden wohl die Daten nicht sicher gelöscht?
Vielen Dank