Anmeldungsdatum: Beiträge: Zähle... |
Hallo Community, die Druckerfunktion ist ohne Fehl & Tadel; Scanner noch nicht. Ich benötige noch etwas Support von euch allen. Das TT läuft in der 32 bit Version; in der Gruppe Scanner bin ich eingetragen; Installation der SW "scangearmp2" über Softwarecenter bei ausgeschaltetem Drucker war ok; verschiedene USB-Port auch schon probiert. Fehlermeldung: kein Scanner gefunden. Was ist zu tun? Gruß -Linuxbear- |
Anmeldungsdatum: Beiträge: 19527 |
Zeige mal folgende Terminal Ausgaben sudo sane-find-scanner -q
export SANE_DEBUG_DLL=255 && scanimage -L |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
@Kellerkind_2009: dem komme ich sehr gern nach; weil es aber nicht meine eigener Rechner ist verzögert sich die Antwort etwas. Ich selbst bin schon enorm auf die Lösung des Problems gespannt. Danke vorab für deine Mühe & Geduld, Gruß -Linuxbear- |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
... jetzt aber: sudo sane-find-scanner -q hier passiert schlichtweg garnichts, nach PW springt das Terminal wieder auf Standard um export SANE_DEBUG_DLL=255 && scanimage -L [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend `xerox_mfp' [dll] init: backend `xerox_mfp' is version 1.0.13 [dll] load: searching backend `v4l' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1' [dll] init: initializing backend `v4l' [dll] init: backend `v4l' is version 1.0.5 [dll] load: searching backend `umax1220u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.2 [dll] load: searching backend `umax' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `rts8891' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend `rts8891' [dll] init: backend `rts8891' is version 1.0.2301 [dll] load: searching backend `ricoh' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.17 [dll] load: searching backend `pie' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `magicolor' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend `magicolor' [dll] init: backend `magicolor' is version 1.0.1 [dll] load: searching backend `ma1509' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.32 [dll] load: searching backend `leo' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `kvs20xx' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend `kvs20xx' [dll] init: backend `kvs20xx' is version 1.0.2 [dll] load: searching backend `kvs1025' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend `kvs1025' [dll] init: backend `kvs1025' is version 1.0.5 [dll] load: searching backend `kodakaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1' [dll] init: initializing backend `kodakaio' [dll] init: backend `kodakaio' is version 1.0.3 [dll] load: searching backend `kodak' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend `kodak' [dll] init: backend `kodak' is version 1.0.7 [dll] load: searching backend `ibm' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.1 [dll] load: searching backend `hp5590' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.7 [dll] load: searching backend `hp5400' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.2302 [dll] load: searching backend `fujitsu' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.111 [dll] load: searching backend `epson2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] init: backend `epson2' is version 1.0.124 [dll] load: searching backend `epjitsu' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.20 [dll] load: searching backend `dmc' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan3' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend `coolscan3' [dll] init: backend `coolscan3' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.2 [dll] load: searching backend `canon_dr' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.39 [dll] load: searching backend `canon630u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.296 [dll] load: searching backend `apple' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.23 [dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1' [dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1' (No such file or directory) [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend `xerox_mfp's exit function [dll] sane_exit: calling backend `v4l's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `rts8891's exit function [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `qcam's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb2's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `mustek's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `magicolor's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `kvs20xx's exit function [dll] sane_exit: calling backend `kvs1025's exit function [dll] sane_exit: calling backend `kodakaio's exit function [dll] sane_exit: calling backend `kodak's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hpsj5s's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [dll] sane_exit: calling backend `genesys's exit function [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epson2's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `dell1600n_net's exit function [dll] sane_exit: calling backend `coolscan3's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec_eplus48u's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished Bitte schön; ich bin weiterhin gespannt. Auf meinem eigenen PC, ebenfalls mit TT (64 bit aber deutlich moderner und leistungsfähiger) bewirkt der erste Befehl ebenfalls nichts. Gruß -Linuxbear- |
|
Anmeldungsdatum: Beiträge: 19527 |
Bitte immer die vollständigen Terminal Ausgabe zeigen.Zeige mal ls /etc/udev/rules.d/*
dpkg -l scange* libc6 libstdc++6 libusb-0.1-4
ldd /usr/bin/scangearmp2 Im Terminal ausgeführt scangearmp2 |
|
Anmeldungsdatum: Beiträge: 19527 |
So sollte es Aussehen stephan@stephan-Desktop:~$ sudo sane-find-scanner -q [sudo] Passwort für stephan: could not fetch string descriptor: Pipe error could not fetch string descriptor: Pipe error found USB scanner (vendor=0x03f0 [HP], product=0x8c11 [Deskjet F4500 series]) at libusb:008:002 stephan@stephan-Desktop:~$ Nochmal mit sudo sane-find-scanner zeigen,sowie lsusb |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
@Kellerkind_2009: Danke; wie gut dass es Experten wie dich gibt. Ich schätze mal, dass spätestens nächste Woche der Scanner tut was er soll. Nur noch schnell zur Unterstützung meiner Angaben. sudo sane-find-scanner -q ergibt bei beiden Rechnern bear@Laptop:~$ sudo sane-find-scanner -q [sudo] password for bear: bear@Laptop:~$ sudo sane-find-scanner ergibt bei meinem PC bear@Laptop:~$ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. Leider komme ich an den eigentlichen Zielrechner erst am Dienstag vm wieder ran; werde dann sofort mit mehr Gründlichkeit deine Anforderungen posten. Ich wünsche dir ein schönes WE und bedanke mich erneut für deine enorme Geduld. Gruß -Linuxbear- |
|
Anmeldungsdatum: Beiträge: 19527 |
Moin Linuxbear Ist dein eigener Scanner über USB angeschlossen? Nur für USB angeschlossene Geräte dient der Befehl ☺ (sudo sane-find-scanner) |
|
Anmeldungsdatum: Beiträge: 19527 |
Gute Nachrichten auch für (Trusty). Programme wie Xsane oder SimpleScan sollten laufen 😉 In der /lib/udev/rules.d/60-libsane.rules # Canon PIXMA MG3600 Series
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="178a", ENV{libsane_matched}="yes"Dazu nachdem die anderen Angaben gemacht wurden sudo add-apt-repository ppa:rolfbensch/sane-git sudo apt-get install libsane-dev && sudo apt-get update && sudo apt-get upgrade sudo ppa-purge ppa:rolfbensch/sane-git Danach sollte der Scanner auch ohne Scangearmp2 laufen. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
...yep, beide Scanner/Drucker sind über USB angeschlossen. Nur noch mal zu Sicherheit: mein eigenes System läuft enorm stabil; mein eigener Drucker ist ein Canon MG5650 und ich wollte nur als Referenz meine eigenen Terminalausgeben posten; sofern denn die Abfrage das gleiche Ergebnis gebracht hatte. Wenn ich im III.Quartal auf BB upgrade könnte ich ja die Option Xsane bzw. Simplescan testen. Danke für die Info & schönes WE! Gruß -Linuxbear- |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
@Kellerkind_2009: guten Morgen; hier die Abfragen. lsusb ergibt heidi@heidi-desktop:~$ lsusb Bus 001 Device 003: ID 04a9:178a Canon, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse Bus 003 Device 002: ID 0db0:6982 Micro Star International Medion Flash XL Card Reader Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub heidi@heidi-desktop:~$ sudo sane-find-scanner zeigt heidi@heidi-desktop:~$ sudo sane-find-scanner [sudo] password for heidi: # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. heidi@heidi-desktop:~$ ls /etc/udev/rules.d/* ergibt heidi@heidi-desktop:~$ ls /etc/udev/rules.d/* /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/80-canon_mfp2.rules /etc/udev/rules.d/81-canonij_prn.rules /etc/udev/rules.d/README heidi@heidi-desktop:~$ dpkg -l scange* libc6 libstdc++6 libusb-0.1-4 zeigt heidi@heidi-desktop:~$ dpkg -l scange* libc6 libstdc++6 libusb-0.1-4
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==============-============-============-=================================
ii libc6:i386 2.19-0ubuntu i386 Embedded GNU C Library: Shared li
ii libstdc++6:i38 4.8.4-2ubunt i386 GNU Standard C++ Library v3
ii libusb-0.1-4:i 2:0.1.12-23. i386 userspace USB programming library
ii scangearmp2 3.00-1 i386 ScanGear MP for Linux.
heidi@heidi-desktop:~$ldd /usr/bin/scangearmp2 zeigt heidi@heidi-desktop:~$ ldd /usr/bin/scangearmp2 linux-gate.so.1 => (0xb7768000) libgtk-x11-2.0.so.0 => /usr/lib/i386-linux-gnu/libgtk-x11-2.0.so.0 (0xb72e0000) libgdk-x11-2.0.so.0 => /usr/lib/i386-linux-gnu/libgdk-x11-2.0.so.0 (0xb7231000) libatk-1.0.so.0 => /usr/lib/i386-linux-gnu/libatk-1.0.so.0 (0xb7210000) libgio-2.0.so.0 => /usr/lib/i386-linux-gnu/libgio-2.0.so.0 (0xb708f000) libpangoft2-1.0.so.0 => /usr/lib/i386-linux-gnu/libpangoft2-1.0.so.0 (0xb7079000) libgdk_pixbuf-2.0.so.0 => /usr/lib/i386-linux-gnu/libgdk_pixbuf-2.0.so.0 (0xb7054000) libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xb700e000) libpangocairo-1.0.so.0 => /usr/lib/i386-linux-gnu/libpangocairo-1.0.so.0 (0xb7001000) libcairo.so.2 => /usr/lib/i386-linux-gnu/libcairo.so.2 (0xb6ede000) libpango-1.0.so.0 => /usr/lib/i386-linux-gnu/libpango-1.0.so.0 (0xb6e91000) libfreetype.so.6 => /usr/lib/i386-linux-gnu/libfreetype.so.6 (0xb6df0000) libfontconfig.so.1 => /usr/lib/i386-linux-gnu/libfontconfig.so.1 (0xb6db5000) libgobject-2.0.so.0 => /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 (0xb6d63000) libgthread-2.0.so.0 => /usr/lib/i386-linux-gnu/libgthread-2.0.so.0 (0xb6d60000) libgmodule-2.0.so.0 => /usr/lib/i386-linux-gnu/libgmodule-2.0.so.0 (0xb6d5b000) librt.so.1 => /lib/i386-linux-gnu/librt.so.1 (0xb6d51000) libglib-2.0.so.0 => /lib/i386-linux-gnu/libglib-2.0.so.0 (0xb6c45000) libusb-1.0.so.0 => /lib/i386-linux-gnu/libusb-1.0.so.0 (0xb6c2e000) libcncpmslld2.so => /usr/lib/libcncpmslld2.so (0xb6c18000) libcncpnet2.so => /usr/lib/libcncpnet2.so (0xb6c0e000) libpthread.so.0 => /lib/i386-linux-gnu/libpthread.so.0 (0xb6bf1000) libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xb6a40000) libX11.so.6 => /usr/lib/i386-linux-gnu/libX11.so.6 (0xb690c000) libXfixes.so.3 => /usr/lib/i386-linux-gnu/libXfixes.so.3 (0xb6906000) libXrender.so.1 => /usr/lib/i386-linux-gnu/libXrender.so.1 (0xb68fb000) libXinerama.so.1 => /usr/lib/i386-linux-gnu/libXinerama.so.1 (0xb68f6000) libXi.so.6 => /usr/lib/i386-linux-gnu/libXi.so.6 (0xb68e6000) libXrandr.so.2 => /usr/lib/i386-linux-gnu/libXrandr.so.2 (0xb68db000) libXcursor.so.1 => /usr/lib/i386-linux-gnu/libXcursor.so.1 (0xb68d0000) libXcomposite.so.1 => /usr/lib/i386-linux-gnu/libXcomposite.so.1 (0xb68cc000) libXdamage.so.1 => /usr/lib/i386-linux-gnu/libXdamage.so.1 (0xb68c7000) libXext.so.6 => /usr/lib/i386-linux-gnu/libXext.so.6 (0xb68b4000) libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xb689a000) libselinux.so.1 => /lib/i386-linux-gnu/libselinux.so.1 (0xb6877000) libresolv.so.2 => /lib/i386-linux-gnu/libresolv.so.2 (0xb685f000) libharfbuzz.so.0 => /usr/lib/i386-linux-gnu/libharfbuzz.so.0 (0xb6807000) /lib/ld-linux.so.2 (0xb776a000) libpixman-1.so.0 => /usr/lib/i386-linux-gnu/libpixman-1.so.0 (0xb675e000) libpng12.so.0 => /lib/i386-linux-gnu/libpng12.so.0 (0xb6736000) libxcb-shm.so.0 => /usr/lib/i386-linux-gnu/libxcb-shm.so.0 (0xb6732000) libxcb-render.so.0 => /usr/lib/i386-linux-gnu/libxcb-render.so.0 (0xb6728000) libxcb.so.1 => /usr/lib/i386-linux-gnu/libxcb.so.1 (0xb6705000) libthai.so.0 => /usr/lib/i386-linux-gnu/libthai.so.0 (0xb66fb000) libexpat.so.1 => /lib/i386-linux-gnu/libexpat.so.1 (0xb66d2000) libffi.so.6 => /usr/lib/i386-linux-gnu/libffi.so.6 (0xb66ca000) libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xb66c5000) libpcre.so.3 => /lib/i386-linux-gnu/libpcre.so.3 (0xb6686000) libudev.so.1 => /lib/i386-linux-gnu/libudev.so.1 (0xb6673000) libstdc++.so.6 => /usr/lib/i386-linux-gnu/libstdc++.so.6 (0xb658b000) libgcc_s.so.1 => /lib/i386-linux-gnu/libgcc_s.so.1 (0xb656e000) libgraphite2.so.3 => /usr/lib/i386-linux-gnu/libgraphite2.so.3 (0xb6546000) libXau.so.6 => /usr/lib/i386-linux-gnu/libXau.so.6 (0xb6542000) libXdmcp.so.6 => /usr/lib/i386-linux-gnu/libXdmcp.so.6 (0xb653b000) libdatrie.so.1 => /usr/lib/i386-linux-gnu/libdatrie.so.1 (0xb6532000) libcgmanager.so.0 => /lib/i386-linux-gnu/libcgmanager.so.0 (0xb6514000) libnih.so.1 => /lib/i386-linux-gnu/libnih.so.1 (0xb64fa000) libnih-dbus.so.1 => /lib/i386-linux-gnu/libnih-dbus.so.1 (0xb64f0000) libdbus-1.so.3 => /lib/i386-linux-gnu/libdbus-1.so.3 (0xb64a5000) heidi@heidi-desktop:~$ scangearmp2 ergibt Es wurde kein verfügbarer Scanner gefunden..... Kannst du schon einen Lösungsansatz entdecken? Gruß -Linuxbear- |
|
Anmeldungsdatum: Beiträge: 19527 |
Moin Linuxbear. Der ist ja Hartnäckig 😕 Ok,klemme das Gerät von USB ab sudo apt-get autoremove --purge libsane libsane-common sane-utils libsane-dev libsane-extras libsane-extras-common sane xsane xsane-common danach sudo add-apt-repository ppa:rolfbensch/sane-git gefolgt von sudo apt-get update && sudo apt-get upgrade && sudo apt-get install libsane-dev xsane Sollte alles ohne Fehler laufen - Neustart. Gerät verbinden und Testen.Bei Fehlern sudo sane-find-scanner
export SANE_DEBUG_DLL=255 && scanimage -L |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
... ich stimme dir zu: das ist wirklich Hardcore. Ich werde so schnell als möglich deine Vorgaben umsetzen; diese Woche noch. Obwohl die HW in knapp 2 Monaten erneuert werden soll möchte ich gern diesen Scanner flach am Boden sehen mit einem weißen Fetzen Tuch in der Papierausgabe drin 😀 Gruß -Linuxbear- |
|
Anmeldungsdatum: Beiträge: 19527 |
Den werden wir schon in die Knie zwingen 😬 Gruß Stephan |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 174 |
... vielen herzlichen Dank; das war eine phantastische Hilfe: der Scanner macht endlich was er soll und der Funktionsumfang von Xsane ist auch toll; IMHO besser als Scangear. Im richtigen Leben wäre das der Moment, wo ich dir auf einer Silberschale ein gut gekühltes Bier servieren würde (alternativ ein Glas gute Vollmilch 😀 ) Danke nochmals für deine Engelsgeduld. Gruß -Linuxbear- |