Hallo,
ich habe versucht, mit sane über das Netzwerk vom Drucker "Brother MFC-J6510DW" zu scannen. Kopieren über cups funktioniert wunderbar.
Anscheinend funktioniert der saned.socket nicht. Folgende Ausgaben bekomme ich: (Der Drucker/Scanner hat die IP 192.168.178.24)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 | sudo systemctl status saned ● saned.service - LSB: SANE network scanner server Loaded: loaded (/etc/init.d/saned; bad; vendor preset: enabled) Active: active (running) since Do 2017-12-14 21:10:19 CET; 18min ago Docs: man:systemd-sysv-generator(8) Process: 21230 ExecStop=/etc/init.d/saned stop (code=exited, status=0/SUCCESS) Process: 21235 ExecStart=/etc/init.d/saned start (code=exited, status=0/SUCCESS) CGroup: /system.slice/saned.service ├─21238 /usr/sbin/saned -a saned └─21239 /usr/sbin/saned -a saned Dez 14 21:10:19 HP-250-G5-Notebook-PC systemd[1]: Starting LSB: SANE network scanner server... Dez 14 21:10:19 HP-250-G5-Notebook-PC saned[21237]: saned (AF-indep+IPv6) from sane-backends 1.0.27git starting up Dez 14 21:10:19 HP-250-G5-Notebook-PC saned[21235]: Starting SANE network scanner server: saned. Dez 14 21:10:19 HP-250-G5-Notebook-PC saned[21238]: Now daemonized Dez 14 21:10:19 HP-250-G5-Notebook-PC systemd[1]: Started LSB: SANE network scanner server. |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 | sudo systemctl status saned.socket ● saned.socket - saned incoming socket Loaded: loaded (/etc/systemd/system/saned.socket; enabled; vendor preset: enabled) Active: failed (Result: resources) Listen: [::]:6566 (Stream) Accepted: 0; Connected: 0 Dez 14 21:07:50 HP-250-G5-Notebook-PC systemd[1]: [/etc/systemd/system/saned.socket:5] Assignment outside of section. Ignoring. Dez 14 21:07:50 HP-250-G5-Notebook-PC systemd[1]: [/etc/systemd/system/saned.socket:8] Assignment outside of section. Ignoring. Dez 14 21:07:59 HP-250-G5-Notebook-PC systemd[1]: saned.socket: Failed to listen on sockets: Address already in use Dez 14 21:07:59 HP-250-G5-Notebook-PC systemd[1]: Failed to listen on saned incoming socket. Dez 14 21:07:59 HP-250-G5-Notebook-PC systemd[1]: saned.socket: Unit entered failed state. Dez 14 21:13:31 HP-250-G5-Notebook-PC systemd[1]: Closed saned incoming socket. Dez 14 21:13:31 HP-250-G5-Notebook-PC systemd[1]: saned.socket: Failed to listen on sockets: Address already in use Dez 14 21:13:31 HP-250-G5-Notebook-PC systemd[1]: Failed to listen on saned incoming socket. |
1 2 3 4 5 6 7 8 9 10 11 | scanimage -L [bjnp] udp_command: ERROR - no data received (timeout = 10000) [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this scanner [bjnp] udp_command: ERROR - no data received (timeout = 10000) [bjnp] add_scanner: ERROR - Cannot read scanner make & model: bjnp://192.168.178.24:8612/timeout=10000 No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). |
Ich weiß nicht mehr weiter und evtl habe ich schon zu vieles fälschlicherweise in die Dateien geschrieben, denn zu Beginn hat sane keinen sane.socket gefunden
Ich hoffe ihr könnt mir helfen.