staging.inyokaproject.org

Nach Update auf 12.04LTS kein Power off nach shutdown

Status: Gelöst | Ubuntu-Version: Kubuntu 12.04 (Precise Pangolin)
Antworten |

riedochs

Anmeldungsdatum:
3. Juli 2008

Beiträge: 98

Hallo Leute,

ich habe nun das Update von 10.04LTS auf 12.04LTS durchgeführt. Allerdings habe ich jetzt folgendes Problem: Der PC schaltet sich nach dem herunterfahren nicht aus. Folgendes habe ich schon versucht:

ATI fglrx Treiber deinstalliert Die Lösungsansätze hier raus versucht: http://wiki.ubuntuusers.de/Herunterfahren

Keine Ahnung was ich noch machen soll. ❓

Meine Hardware: AMD 785G Chipsatz AMD Athlon II X2 CPU ATI Radeon 5450 Grafikkarte

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26

root@Jochen-pc:/home/jochen# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 14)

Moderiert von Lasall:

Thema passend verschoben.

riedochs

(Themenstarter)

Anmeldungsdatum:
3. Juli 2008

Beiträge: 98

Moin,

wenn ich über die Konsole 'halt -p' eingebe schaltet sich der pc aus. Besteht die Möglichkeit da was anzupassen?

riedochs

(Themenstarter)

Anmeldungsdatum:
3. Juli 2008

Beiträge: 98

Niemand eine Idee?

coffeeholic Team-Icon

Avatar von coffeeholic

Anmeldungsdatum:
10. August 2012

Beiträge: 1938

Soweit ich weiß kannst du in den KDE Systemeinstellungen den Shutdown-Befehl bearbeiten.

stsi schrieb:

Du bist noch mit Kubuntu unterwegs?

Wenn ja, dann schau mal unter

Systemsteuerung > Anmeldebildschirm > dann den Reiter: Herunterfahren > und hier bei: System herunterfahren

bei mir steht da: /sbin/shutdown -h -P now

riedochs

(Themenstarter)

Anmeldungsdatum:
3. Juli 2008

Beiträge: 98

danke das funktioniert. ☺

Antworten |