Hallo Habe mir den Scanner Pulstek OpticBook 3800L gekauft. Leider erkennt Ubundu den Scanner nicht. sudo apt install sane und sudo apt install xsane habe ich installiert. Im Ordner sane.d sind plustek_pp.config und plustek.conf vorhanden.
Danke im voraus Walter
Mit lsusb
Bus 001 Device 007: ID 07b3:1801 Plustek, Inc. USB2.0 SCANNER
Mit lsusb -v
Bus 001 Device 008: ID 07b3:1801 Plustek, Inc. USB2.0 SCANNER
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x07b3 Plustek, Inc.
idProduct 0x1801 USB2.0 SCANNER
bcdDevice 7.02
iManufacturer 10 PLUSTEK INC
iProduct 11 USB2.0 SCANNER
iSerial 12 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0027
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 10mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 8