Hallo Leute,
bin vor kurzer Zeit nach einen neue Notebookkauf von Windows auf einen Xubuntu Betriebssystem umgestiegen. Das neue Betriebssystem gefällt mir sehr gut, vorallem hat mich die schnelle Performance und die "Einfachkeit" überzeugt. Da ich mich null mit Linux (o. Xubuntu) auskenne brauche ich dringend eure Hilfe.
Habe in den letzten Wochen COMPIZ entdeckt. In den vielen Youtube videos und in diesen Wiki ist es Beschrieben wie man Compiz installieren und benutzen kann. Nach eine installation und ausführung von check-compiz gibt mir folgende Meldung:
mantaz@mantaz-lappy:~$ ./compiz-check Gathering information about your system... Distribution: Ubuntu 11.04 Desktop environment: Xfce Graphics chip: ATI Technologies Inc M880G [Mobility Radeon HD 4200] Driver in use: fglrx Rendering method: None Checking if it's possible to run Compiz on your system... [SKIP] Checking for hardware/setup problems... [SKIP] At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia)
In Internet habe ich ebenfalls mehrere User mit diesen Problem entdeckt. Habe die mehrere Anleitungen ausgeführt und nichts hingekriegt als den Befehl "Driver in use: fglrx" von " Driver in use: radeon" zu ändern.
In einem anderen Forum war vorgeschlagen worden manuell die "Rendering method" einzutragen. Also habe ich ohne Erfolg folgendes in der xorg.conf getippt:
Section "ServerFlags"
Option "AIGLX" "on"
EndSectionDas ist hier meine /var/log/Xorg.0.log:
doch nach der [ 18.675] X.Org X Server 1.10.1 Release Date: 2011-04-15 [ 18.675] X Protocol Version 11, Revision 0 [ 18.675] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu [ 18.675] Current Operating System: Linux mantaz-lappy 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 [ 18.675] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=60d4806a-3841-4478-8419-157601d56867 ro quiet splash vt.handoff=7 [ 18.675] Build Date: 19 April 2011 03:40:45PM [ 18.675] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) [ 18.675] Current version of pixman: 0.20.2 [ 18.675] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.675] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.675] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 26 15:30:15 2011 [ 18.676] (==) Using config file: "/etc/X11/xorg.conf" [ 18.676] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.676] (==) ServerLayout "aticonfig Layout" [ 18.676] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 18.676] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 18.678] (**) | |-->Device "aticonfig-Device[0]-0" [ 18.678] (**) Option "AIGLX" "on" [ 18.678] (==) Automatically adding devices [ 18.678] (==) Automatically enabling devices [ 18.678] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.678] Entry deleted from font path. [ 18.678] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.678] Entry deleted from font path. [ 18.678] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.678] Entry deleted from font path. [ 18.678] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.678] Entry deleted from font path. [ 18.678] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.678] Entry deleted from font path. [ 18.678] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 18.678] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.678] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.678] (II) Loader magic: 0x7e0280 [ 18.678] (II) Module ABI versions: [ 18.678] X.Org ANSI C Emulation: 0.4 [ 18.678] X.Org Video Driver: 10.0 [ 18.678] X.Org XInput driver : 12.3 [ 18.678] X.Org Server Extension : 5.0 [ 18.679] (--) PCI:*(0:1:5:0) 1002:9712:103c:1475 rev 0, Mem @ 0x40000000/268435456, 0x54300000/65536, 0x54200000/1048576, I/O @ 0x00005000/256 [ 18.679] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.679] (II) "extmod" will be loaded by default. [ 18.679] (II) "dbe" will be loaded by default. [ 18.679] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 18.679] (II) "record" will be loaded by default. [ 18.679] (II) "dri" will be loaded by default. [ 18.679] (II) "dri2" will be loaded by default. [ 18.679] (II) LoadModule: "glx" [ 18.680] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so [ 18.680] (II) Module glx: vendor="FireGL - ATI Technologies Inc." [ 18.680] compiled for 6.9.0, module version = 1.0.0 [ 18.680] (II) Loading extension GLX [ 18.680] (II) LoadModule: "extmod" [ 18.840] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 18.840] (II) Module extmod: vendor="X.Org Foundation" [ 18.840] compiled for 1.10.1, module version = 1.0.0 [ 18.840] Module class: X.Org Server Extension [ 18.840] ABI class: X.Org Server Extension, version 5.0 [ 18.840] (II) Loading extension MIT-SCREEN-SAVER [ 18.840] (II) Loading extension XFree86-VidModeExtension [ 18.840] (II) Loading extension XFree86-DGA [ 18.840] (II) Loading extension DPMS [ 18.840] (II) Loading extension XVideo [ 18.840] (II) Loading extension XVideo-MotionCompensation [ 18.840] (II) Loading extension X-Resource [ 18.840] (II) LoadModule: "dbe" [ 18.841] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 18.841] (II) Module dbe: vendor="X.Org Foundation" [ 18.841] compiled for 1.10.1, module version = 1.0.0 [ 18.841] Module class: X.Org Server Extension [ 18.841] ABI class: X.Org Server Extension, version 5.0 [ 18.841] (II) Loading extension DOUBLE-BUFFER [ 18.841] (II) LoadModule: "record" [ 18.841] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 18.841] (II) Module record: vendor="X.Org Foundation" [ 18.841] compiled for 1.10.1, module version = 1.13.0 [ 18.841] Module class: X.Org Server Extension [ 18.841] ABI class: X.Org Server Extension, version 5.0 [ 18.841] (II) Loading extension RECORD [ 18.841] (II) LoadModule: "dri" [ 18.841] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 18.841] (II) Module dri: vendor="X.Org Foundation" [ 18.841] compiled for 1.10.1, module version = 1.0.0 [ 18.841] ABI class: X.Org Server Extension, version 5.0 [ 18.841] (II) Loading extension XFree86-DRI [ 18.841] (II) LoadModule: "dri2" [ 18.841] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 18.842] (II) Module dri2: vendor="X.Org Foundation" [ 18.842] compiled for 1.10.1, module version = 1.2.0 [ 18.842] ABI class: X.Org Server Extension, version 5.0 [ 18.842] (II) Loading extension DRI2 [ 18.842] (II) LoadModule: "fglrx" [ 18.842] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 18.861] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 18.861] compiled for 1.4.99.906, module version = 8.84.60 [ 18.861] Module class: X.Org Video Driver [ 18.862] (II) Loading sub module "fglrxdrm" [ 18.862] (II) LoadModule: "fglrxdrm" [ 18.862] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 18.862] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 18.862] compiled for 1.4.99.906, module version = 8.84.60 [ 18.862] (II) ATI Proprietary Linux Driver Version Identifier:8.84.60 [ 18.862] (II) ATI Proprietary Linux Driver Release Identifier: 8.84.6 [ 18.862] (II) ATI Proprietary Linux Driver Build Date: Mar 24 2011 19:27:47 [ 18.862] (++) using VT number 7 [ 18.862] (WW) Falling back to old probe method for fglrx [ 18.866] (II) Loading PCS database from /etc/ati/amdpcsdb [ 18.867] (--) Chipset Supported AMD Graphics Processor (0x9712) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found [ 18.867] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found [ 18.867] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 18.868] (II) AMD Video driver is signed [ 18.868] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 18.868] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 18.868] (II) fglrx(0): pEnt->device->identifier=0x26b16b0 [ 18.868] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin [ 18.868] (II) Loading sub module "vgahw" [ 18.868] (II) LoadModule: "vgahw" [ 18.870] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 18.870] (II) Module vgahw: vendor="X.Org Foundation" [ 18.870] compiled for 1.10.1, module version = 0.1.0 [ 18.870] ABI class: X.Org Video Driver, version 10.0 [ 18.871] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 18.871] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 18.871] (==) fglrx(0): Default visual is TrueColor [ 18.871] (**) fglrx(0): Option "DPMS" "true" [ 18.871] (==) fglrx(0): RGB weight 888 [ 18.871] (II) fglrx(0): Using 8 bits per RGB [ 18.871] (==) fglrx(0): Buffer Tiling is ON [ 18.871] (II) Loading sub module "fglrxdrm" [ 18.871] (II) LoadModule: "fglrxdrm" [ 18.871] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 18.871] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 18.871] compiled for 1.4.99.906, module version = 8.84.60 [ 18.874] ukiDynamicMajor: found major device number 250 [ 18.874] ukiDynamicMajor: found major device number 250 [ 18.874] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 18.874] ukiOpenDevice: node name is /dev/ati/card0 [ 18.874] ukiOpenDevice: open result is 11, (OK) [ 18.874] ukiOpenByBusid: ukiOpenMinor returns 11 [ 18.874] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 18.874] (==) fglrx(0): NoAccel = NO [ 18.875] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 18.875] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712) [ 18.875] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1475) [ 18.875] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 18.875] (--) fglrx(0): Linear framebuffer (phys) at 0x40000000 [ 18.875] (--) fglrx(0): MMIO registers at 0x54300000 [ 18.875] (--) fglrx(0): I/O port at 0x00005000 [ 18.875] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 18.970] (II) fglrx(0): Battery is used [ 18.977] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 18.978] (II) Loading sub module "vbe" [ 18.978] (II) LoadModule: "vbe" [ 18.979] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 18.979] (II) Module vbe: vendor="X.Org Foundation" [ 18.979] compiled for 1.10.1, module version = 1.1.0 [ 18.979] ABI class: X.Org Video Driver, version 10.0 [ 18.979] (II) fglrx(0): VESA BIOS detected [ 18.979] (II) fglrx(0): VESA VBE Version 3.0 [ 18.979] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 18.979] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS [ 18.979] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94 [ 18.979] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. [ 18.979] (II) fglrx(0): VESA VBE OEM Product: RS880M [ 18.979] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 18.987] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 18.987] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3 [ 18.987] (II) fglrx(0): PCIE card detected [ 18.987] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 18.987] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 18.990] (II) fglrx(0): Using adapter: 1:5.0. [ 18.997] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) [ 19.003] (II) fglrx(0): Interrupt handler installed at IRQ 18. [ 19.003] (II) fglrx(0): RandR 1.2 support is enabled! [ 19.003] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 19.003] (==) fglrx(0): Center Mode is disabled [ 19.003] (II) Loading sub module "fb" [ 19.003] (II) LoadModule: "fb" [ 19.003] (II) Loading /usr/lib/xorg/modules/libfb.so [ 19.004] (II) Module fb: vendor="X.Org Foundation" [ 19.004] compiled for 1.10.1, module version = 1.0.0 [ 19.004] ABI class: X.Org ANSI C Emulation, version 0.4 [ 19.004] (II) Loading sub module "ddc" [ 19.004] (II) LoadModule: "ddc" [ 19.004] (II) Module "ddc" already built-in [ 19.175] (II) fglrx(0): Finished Initialize PPLIB! [ 19.177] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0 [ 19.177] (II) fglrx(0): Output DFP1 has no monitor section [ 19.177] (II) fglrx(0): Output CRT1 has no monitor section [ 19.177] (II) Loading sub module "ddc" [ 19.177] (II) LoadModule: "ddc" [ 19.177] (II) Module "ddc" already built-in [ 19.177] (II) fglrx(0): Connected Display0: LVDS [ 19.177] (II) fglrx(0): Display0 EDID data --------------------------- [ 19.177] (II) fglrx(0): Manufacturer: LGD Model: 2ad Serial#: 0 [ 19.177] (II) fglrx(0): Year: 2010 Week: 0 [ 19.177] (II) fglrx(0): EDID Version: 1.3 [ 19.177] (II) fglrx(0): Digital Display Input [ 19.177] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 19.177] (II) fglrx(0): Gamma: 2.20 [ 19.178] (II) fglrx(0): No DPMS capabilities specified [ 19.178] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 19.178] (II) fglrx(0): First detailed timing is preferred mode [ 19.178] (II) fglrx(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 19.178] (II) fglrx(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 19.178] (II) fglrx(0): Manufacturer's mask: 0 [ 19.178] (II) fglrx(0): Supported detailed timing: [ 19.178] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 19.178] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 19.178] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 19.178] (II) fglrx(0): LG Display [ 19.178] (II) fglrx(0): LP156WH2-TLRB [ 19.178] (II) fglrx(0): EDID (in hex): [ 19.178] (II) fglrx(0): 00ffffffffffff0030e4ad0200000000 [ 19.178] (II) fglrx(0): 00140103802213780ac1259d5f5b9b27 [ 19.178] (II) fglrx(0): 19505400000001010101010101010101 [ 19.178] (II) fglrx(0): 010101010101121b567850000e302020 [ 19.178] (II) fglrx(0): 240058c2100000190000000000000000 [ 19.178] (II) fglrx(0): 00000000000000000000000000fe004c [ 19.178] (II) fglrx(0): 4720446973706c61790a2020000000fe [ 19.178] (II) fglrx(0): 004c503135365748322d544c524200bf [ 19.178] (II) fglrx(0): End of Display0 EDID data -------------------- [ 19.208] (II) fglrx(0): EDID for output LVDS [ 19.208] (II) fglrx(0): Manufacturer: LGD Model: 2ad Serial#: 0 [ 19.208] (II) fglrx(0): Year: 2010 Week: 0 [ 19.208] (II) fglrx(0): EDID Version: 1.3 [ 19.208] (II) fglrx(0): Digital Display Input [ 19.208] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 19.208] (II) fglrx(0): Gamma: 2.20 [ 19.208] (II) fglrx(0): No DPMS capabilities specified [ 19.208] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 19.208] (II) fglrx(0): First detailed timing is preferred mode [ 19.208] (II) fglrx(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 19.208] (II) fglrx(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 19.208] (II) fglrx(0): Manufacturer's mask: 0 [ 19.208] (II) fglrx(0): Supported detailed timing: [ 19.208] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 19.208] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 19.208] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 19.208] (II) fglrx(0): LG Display [ 19.208] (II) fglrx(0): LP156WH2-TLRB [ 19.208] (II) fglrx(0): EDID (in hex): [ 19.208] (II) fglrx(0): 00000000000000003a20765f61637469 [ 19.208] (II) fglrx(0): 76653a2025692020765f73796e633a20 [ 19.208] (II) fglrx(0): 25692020765f73796e635f656e642025 [ 19.208] (II) fglrx(0): 6920765f626c616e6b696e673a202569 [ 19.208] (II) fglrx(0): 200058c2100000190000000000000000 [ 19.208] (II) fglrx(0): 0000000000000000b100000000000000 [ 19.208] (II) fglrx(0): 1822c567e17f00001822c567e17f0000 [ 19.208] (II) fglrx(0): 004c503135365748322d544c524200bf [ 19.208] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 19.208] (II) fglrx(0): Printing DDC gathered Modelines: [ 19.208] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Printing probed modes for output LVDS [ 19.208] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1398 1430 1486 768 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1398 1430 1486 768 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1398 1430 1486 720 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1398 1430 1486 768 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "1280x600"x60.0 69.30 1280 1398 1430 1486 600 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1398 1430 1486 600 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1398 1430 1486 600 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1398 1430 1486 480 770 774 782 +hsync +vsync (46.6 kHz) [ 19.208] (II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1398 1430 1486 480 770 774 782 +hsync +vsync (46.6 kHz) [ 19.209] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1398 1430 1486 480 770 774 782 +hsync +vsync (46.6 kHz) [ 19.209] (II) fglrx(0): EDID for output DFP1 [ 19.209] (II) fglrx(0): EDID for output CRT1 [ 19.209] (II) fglrx(0): Output LVDS connected [ 19.209] (II) fglrx(0): Output DFP1 disconnected [ 19.209] (II) fglrx(0): Output CRT1 disconnected [ 19.209] (II) fglrx(0): Using exact sizes for initial modes [ 19.209] (II) fglrx(0): Output LVDS using initial mode 1366x768 [ 19.209] (II) fglrx(0): Display dimensions: (340, 190) mm [ 19.209] (II) fglrx(0): DPI set to (102, 102) [ 19.209] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4200 Series has 2 configurable heads and 1 displays connected. [ 19.209] (==) fglrx(0): PseudoColor visuals disabled [ 19.209] (II) Loading sub module "ramdac" [ 19.209] (II) LoadModule: "ramdac" [ 19.209] (II) Module "ramdac" already built-in [ 19.209] (==) fglrx(0): NoDRI = NO [ 19.209] (==) fglrx(0): Capabilities: 0x00000000 [ 19.209] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 19.209] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 19.209] (==) fglrx(0): UseFastTLS=0 [ 19.209] (==) fglrx(0): BlockSignalsOnLock=1 [ 19.209] (--) Depth 24 pixmap format is 32 bpp [ 19.209] (II) Loading extension ATIFGLRXDRI [ 19.209] (II) fglrx(0): doing swlDriScreenInit [ 19.209] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 19.209] ukiDynamicMajor: found major device number 250 [ 19.209] ukiDynamicMajor: found major device number 250 [ 19.209] ukiDynamicMajor: found major device number 250 [ 19.209] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 19.209] ukiOpenDevice: node name is /dev/ati/card0 [ 19.209] ukiOpenDevice: open result is 16, (OK) [ 19.209] ukiOpenByBusid: ukiOpenMinor returns 16 [ 19.209] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 19.209] (II) fglrx(0): [uki] DRM interface version 1.0 [ 19.209] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:5:0" [ 19.209] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 19.209] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fe169652000 [ 19.209] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 19.209] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 19.209] (II) fglrx(0): swlDriScreenInit done [ 19.209] (II) fglrx(0): Kernel Module Version Information: [ 19.209] (II) fglrx(0): Name: fglrx [ 19.209] (II) fglrx(0): Version: 8.84.60 [ 19.209] (II) fglrx(0): Date: Mar 24 2011 [ 19.209] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 19.209] (II) fglrx(0): Kernel Module version matches driver. [ 19.210] (II) fglrx(0): Kernel Module Build Time Information: [ 19.210] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38-8-generic [ 19.210] (II) fglrx(0): Build-Kernel MODVERSIONS: yes [ 19.210] (II) fglrx(0): Build-Kernel __SMP__: yes [ 19.210] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 19.210] (II) fglrx(0): [uki] register handle = 0x00004000 [ 19.226] (II) fglrx(0): DRI initialization successfull [ 19.226] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000 [ 19.227] (==) fglrx(0): Backing store disabled [ 19.227] (II) Loading extension FGLRXEXTENSION [ 19.227] (**) fglrx(0): DPMS enabled [ 19.227] (II) fglrx(0): Initialized in-driver Xinerama extension [ 19.227] (**) fglrx(0): Textured Video is enabled. [ 19.227] (II) LoadModule: "glesx" [ 19.227] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so [ 19.228] (II) Module glesx: vendor="X.Org Foundation" [ 19.228] compiled for 1.4.99.906, module version = 1.0.0 [ 19.228] (II) Loading extension GLESX [ 19.228] (II) fglrx(0): GLESX enableFlags = 528 [ 19.228] (II) fglrx(0): GLESX is enabled [ 19.228] (II) LoadModule: "amdxmm" [ 19.228] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so [ 19.228] (II) Module amdxmm: vendor="X.Org Foundation" [ 19.228] compiled for 1.4.99.906, module version = 2.0.0 [ 19.229] (II) Loading extension AMDXVOPL [ 19.229] (II) Loading extension AMDXVBA [ 19.229] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 19.231] (II) fglrx(0): Enable composite support successfully [ 19.231] (WW) fglrx(0): Option "VendorName" is not used [ 19.231] (WW) fglrx(0): Option "ModelName" is not used [ 19.231] (II) fglrx(0): X context handle = 0x1 [ 19.231] (II) fglrx(0): [DRI] installation complete [ 19.231] (==) fglrx(0): Silken mouse enabled [ 19.231] (==) fglrx(0): Using HW cursor of display infrastructure! [ 19.231] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 19.232] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel' [ 19.232] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' [ 19.234] (WW) fglrx(0): Unknown ConnectorType: 0! [ 19.792] (--) RandR disabled [ 19.792] (II) Initializing built-in extension Generic Event Extension [ 19.792] (II) Initializing built-in extension SHAPE [ 19.792] (II) Initializing built-in extension MIT-SHM [ 19.792] (II) Initializing built-in extension XInputExtension [ 19.792] (II) Initializing built-in extension XTEST [ 19.792] (II) Initializing built-in extension BIG-REQUESTS [ 19.792] (II) Initializing built-in extension SYNC [ 19.792] (II) Initializing built-in extension XKEYBOARD [ 19.792] (II) Initializing built-in extension XC-MISC [ 19.792] (II) Initializing built-in extension SECURITY [ 19.792] (II) Initializing built-in extension XINERAMA [ 19.792] (II) Initializing built-in extension XFIXES [ 19.792] (II) Initializing built-in extension RENDER [ 19.792] (II) Initializing built-in extension RANDR [ 19.792] (II) Initializing built-in extension COMPOSITE [ 19.792] (II) Initializing built-in extension DAMAGE [ 19.792] (II) Initializing built-in extension GESTURE [ 19.808] ukiDynamicMajor: found major device number 250 [ 19.808] ukiDynamicMajor: found major device number 250 [ 19.808] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 19.808] ukiOpenDevice: node name is /dev/ati/card0 [ 19.808] ukiOpenDevice: open result is 18, (OK) [ 19.808] ukiOpenByBusid: ukiOpenMinor returns 18 [ 19.808] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 19.889] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 19.889] (II) fglrx(0): Enable the clock gating! [ 19.889] (II) fglrx(0): Setting screen physical size to 361 x 203 [ 19.900] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 19.908] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 19.908] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 19.908] (II) LoadModule: "evdev" [ 19.908] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.909] (II) Module evdev: vendor="X.Org Foundation" [ 19.909] compiled for 1.10.0.902, module version = 2.6.0 [ 19.909] Module class: X.Org XInput Driver [ 19.909] ABI class: X.Org XInput driver, version 12.3 [ 19.909] (II) Using input driver 'evdev' for 'Power Button' [ 19.909] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.909] (**) Power Button: always reports core events [ 19.909] (**) Power Button: Device: "/dev/input/event2" [ 19.930] (--) Power Button: Found keys [ 19.930] (II) Power Button: Configuring as keyboard [ 19.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 19.930] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 19.930] (**) Option "xkb_rules" "evdev" [ 19.930] (**) Option "xkb_model" "pc105" [ 19.930] (**) Option "xkb_layout" "de" [ 19.932] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 19.933] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 19.933] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 19.933] (II) Using input driver 'evdev' for 'Video Bus' [ 19.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.933] (**) Video Bus: always reports core events [ 19.933] (**) Video Bus: Device: "/dev/input/event6" [ 19.933] (--) Video Bus: Found keys [ 19.934] (II) Video Bus: Configuring as keyboard [ 19.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6/event6" [ 19.934] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 19.934] (**) Option "xkb_rules" "evdev" [ 19.934] (**) Option "xkb_model" "pc105" [ 19.934] (**) Option "xkb_layout" "de" [ 19.936] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 19.936] (II) No input driver/identifier specified (ignoring) [ 19.937] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 19.937] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 19.937] (II) Using input driver 'evdev' for 'Sleep Button' [ 19.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.937] (**) Sleep Button: always reports core events [ 19.937] (**) Sleep Button: Device: "/dev/input/event0" [ 19.960] (--) Sleep Button: Found keys [ 19.960] (II) Sleep Button: Configuring as keyboard [ 19.960] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0" [ 19.960] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 19.960] (**) Option "xkb_rules" "evdev" [ 19.960] (**) Option "xkb_model" "pc105" [ 19.960] (**) Option "xkb_layout" "de" [ 19.964] (II) config/udev: Adding input device HP Webcam [2 MP Fixed] (/dev/input/event5) [ 19.964] (**) HP Webcam [2 MP Fixed]: Applying InputClass "evdev keyboard catchall" [ 19.964] (II) Using input driver 'evdev' for 'HP Webcam [2 MP Fixed]' [ 19.964] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.964] (**) HP Webcam [2 MP Fixed]: always reports core events [ 19.964] (**) HP Webcam [2 MP Fixed]: Device: "/dev/input/event5" [ 19.964] (--) HP Webcam [2 MP Fixed]: Found keys [ 19.964] (II) HP Webcam [2 MP Fixed]: Configuring as keyboard [ 19.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input5/event5" [ 19.964] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Fixed]" (type: KEYBOARD) [ 19.964] (**) Option "xkb_rules" "evdev" [ 19.964] (**) Option "xkb_model" "pc105" [ 19.964] (**) Option "xkb_layout" "de" [ 19.965] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event4) [ 19.965] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall" [ 19.965] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE' [ 19.965] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.965] (**) PIXART USB OPTICAL MOUSE: always reports core events [ 19.965] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4" [ 19.990] (--) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons [ 19.990] (--) PIXART USB OPTICAL MOUSE: Found scroll wheel(s) [ 19.990] (--) PIXART USB OPTICAL MOUSE: Found relative axes [ 19.990] (--) PIXART USB OPTICAL MOUSE: Found x and y relative axes [ 19.990] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse [ 19.990] (II) PIXART USB OPTICAL MOUSE: Adding scrollwheel support [ 19.990] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5 [ 19.990] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 19.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4/event4" [ 19.990] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE) [ 19.990] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes. [ 19.990] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1 [ 19.990] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0 [ 19.990] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000 [ 19.990] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4 [ 19.990] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0) [ 19.990] (II) No input driver/identifier specified (ignoring) [ 19.991] (II) config/udev: Adding input device HDA ATI SB HP Out at Ext Front Jack (/dev/input/event10) [ 19.991] (II) No input driver/identifier specified (ignoring) [ 19.992] (II) config/udev: Adding input device HDA ATI SB Mic at Ext Front Jack (/dev/input/event9) [ 19.992] (II) No input driver/identifier specified (ignoring) [ 19.993] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 19.993] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 19.993] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 19.993] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 19.993] (**) AT Translated Set 2 keyboard: always reports core events [ 19.993] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 19.993] (--) AT Translated Set 2 keyboard: Found keys [ 19.993] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 19.993] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 19.993] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 19.993] (**) Option "xkb_rules" "evdev" [ 19.993] (**) Option "xkb_model" "pc105" [ 19.993] (**) Option "xkb_layout" "de" [ 19.994] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8) [ 19.994] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 19.994] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 19.994] (II) LoadModule: "synaptics" [ 19.994] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 19.994] (II) Module synaptics: vendor="X.Org Foundation" [ 19.994] compiled for 1.10.0.902, module version = 1.3.99 [ 19.994] Module class: X.Org XInput Driver [ 19.995] ABI class: X.Org XInput driver, version 12.3 [ 19.995] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 19.995] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 19.995] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 19.995] (**) Option "Device" "/dev/input/event8" [ 20.000] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5654 [ 20.000] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4698 [ 20.000] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 20.000] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 20.000] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 20.010] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 20.010] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 20.010] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8" [ 20.010] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 20.010] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 20.010] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 20.010] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038 [ 20.010] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 20.010] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 20.010] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 20.010] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 20.020] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 20.021] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 20.021] (II) No input driver/identifier specified (ignoring) [ 20.025] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) [ 20.025] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 20.025] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 20.025] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.025] (**) HP WMI hotkeys: always reports core events [ 20.025] (**) HP WMI hotkeys: Device: "/dev/input/event7" [ 20.025] (--) HP WMI hotkeys: Found keys [ 20.025] (II) HP WMI hotkeys: Configuring as keyboard [ 20.025] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7" [ 20.025] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD) [ 20.025] (**) Option "xkb_rules" "evdev" [ 20.025] (**) Option "xkb_model" "pc105" [ 20.025] (**) Option "xkb_layout" "de" [ 20.159] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 20.516] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 20.516] (II) fglrx(0): Printing DDC gathered Modelines: [ 20.516] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 20.532] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 20.532] (II) fglrx(0): Printing DDC gathered Modelines: [ 20.532] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 20.547] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 20.547] (II) fglrx(0): Printing DDC gathered Modelines: [ 20.547] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 20.562] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 20.562] (II) fglrx(0): Printing DDC gathered Modelines: [ 20.562] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 28.067] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 28.067] (II) fglrx(0): Printing DDC gathered Modelines: [ 28.067] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 28.081] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 28.081] (II) fglrx(0): Printing DDC gathered Modelines: [ 28.081] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 28.840] (II) fglrx(0): EDID vendor "LGD", prod id 685 [ 28.840] (II) fglrx(0): Printing DDC gathered Modelines: [ 28.840] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 908.490] (II) config/udev: removing device PIXART USB OPTICAL MOUSE [ 908.491] (II) PIXART USB OPTICAL MOUSE: Close [ 908.491] (II) UnloadModule: "evdev" [ 908.491] (II) Unloading evdev [ 1076.522] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0) [ 1076.522] (II) No input driver/identifier specified (ignoring) [ 1076.525] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event4) [ 1076.525] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall" [ 1076.525] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE' [ 1076.525] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 1076.525] (**) PIXART USB OPTICAL MOUSE: always reports core events [ 1076.525] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4" [ 1076.550] (--) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons [ 1076.550] (--) PIXART USB OPTICAL MOUSE: Found scroll wheel(s) [ 1076.550] (--) PIXART USB OPTICAL MOUSE: Found relative axes [ 1076.550] (--) PIXART USB OPTICAL MOUSE: Found x and y relative axes [ 1076.550] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse [ 1076.550] (II) PIXART USB OPTICAL MOUSE: Adding scrollwheel support [ 1076.550] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5 [ 1076.550] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1076.550] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input11/event4" [ 1076.550] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE) [ 1076.550] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes. [ 1076.551] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1 [ 1076.551] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0 [ 1076.551] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000 [ 1076.551] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
Meine /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
Load "glx"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "ServerFlags"
Option "AIGLX" "on" (habe ich zugefügt, ob es jedoch was bringt, ist ne andere FRAGE)
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Mein Notebook hat folgebnde Hardware: AMD Athlon™ II Dual-Core P360 Prozessor 2x 2,30 Ghz, Größe 1024 MB DDR3 SDRAMmit der Taktung PC3 8500 (1066 MHz), Grafikkarte ist ATI Radeon HD 4200.
Habt ihr vielleicht irgendeine Idee was ich da tuhen kann?
Ahja, wenn der Screensaver erscheint, hängt der auch meistens. Kann es sein das da was mit dem Treiber ist?
Schöne Grüße aus Hamburg
mantaz