staging.inyokaproject.org

Hallo zusammen,

ich habe mir einen neuen Drucker zugelegt, Brother DCP-L3510CDW. Der Drucker ist WLAN fähig. Welches ich auch nutzen möchte. Ich habe die Software von Brother im Terminal ausgeführt und Drucker und Scanner wurden installiert. Der Drucker druckt über WLAN, Router ist eine Fritz-Box.

Nur der Scanner will nicht.

Wenn ich den Dokumenten-Scanner öffne kommt die folgende Meldung:

Bereit zum Scannen Brother DCP-L3510CDW

Wenn ich dann aber oben links auf Einlesen klicke, kommt das Folgende:

Scannen fehlgeschlagen Verbindung zum Scanner konnte nicht hergestellt werden.

Betriebssystem ist Ubuntu 20.04.5 LTS

Bei Ubuntuusers gibt es unter Wiki/Scanner/Brother einen Abschnitt "Scanner über Netzwerk nutzen". Da ist dann das Folgende ausgeführt: Je nachdem, welches brscan* Paket installiert wurde, muss folgender Befehl im Terminal ^[4] ausgeführt werden:

brsaneconfig -a name=FRIENDLY-NAME model=MODEL-NAME nodename=HOSTNAME

Ich stehe jetzt völlig auf dem Schlauch: MODEL-NAME und HOSTNAME ist mir klar. Aber was bitte ist FRIENDLY-NAME?

Nun hoffe ich mal, dass mir geholfen wird.

Viele Grüße aus einem verregneten Halle.

Andreas Franke

Moin,

zeige mal

dpkg -l | egrep 'ippusbxd|ipp-usb|libusb-0.1-4|system-config-printer-udev|Brother'

andreas@andreas-MS-7A38:~$ dpkg -l | egrep 'ippusbxd|ipp-usb|libusb-0.1-4|system-config-printer-üdev|Brother' ii brscan-skey 0.3.1-2 amd64 Brother Linux scanner S-KEY tool ii brscan4 0.4.11-1 amd64 Brother Scanner Driver ii dcpl2500dcupswrapper:i386 3.2.0-1 i386 Brother DCP-L2500D CUPS wrapper driver ii dcpl2500dlpr:i386 3.2.0-1 i386 Brother DCP-L2500D LPR driver ii dcpl3510cdwpdrv:i386 1.0.2-0 i386 Brother Laser Printer Driver ii ippusbxd 1.34-2ubuntu1 amd64 Daemon for IPP USB printer support ii libusb-0.1-4:amd64 2:0.1.12-32 amd64 userspace USB programming library ii printer-driver-brlaser 6-1build1 amd64 printer driver for (some) Brother laser printers ii printer-driver-ptouch 1.4.2-3 amd64 printer driver Brother P-touch label printers andreas@andreas-MS-7A38:~$ ^C andreas@andreas-MS-7A38:~$

andreas@andreas-MS-7A38:~$ dpkg -l | egrep 'ippusbxd|ipp-usb|libusb-0.1-4|system-config-printer-üdev|Brother'

ii brscan-skey 0.3.1-2 amd64 Brother Linux scanner S-KEY tool

ii brscan4 0.4.11-1 amd64 Brother Scanner Driver

ii dcpl2500dcupswrapper:i386 3.2.0-1 i386 Brother DCP-L2500D CUPS wrapper driver

ii dcpl2500dlpr:i386 3.2.0-1 i386 Brother DCP-L2500D LPR driver

ii dcpl3510cdwpdrv:i386 1.0.2-0 i386 Brother Laser Printer Driver

ii ippusbxd 1.34-2ubuntu1 amd64 Daemon for IPP USB printer support

ii libusb-0.1-4:amd64 2:0.1.12-32 amd64 userspace USB programming library

ii printer-driver-brlaser 6-1build1 amd64 printer driver for (some) Brother laser printers

ii printer-driver-ptouch 1.4.2-3 amd64 printer driver Brother P-touch label printers

andreas@andreas-MS-7A38:~$ ^C andreas@andreas-MS-7A38:~$

Führe zuerst mal aus

sudo apt purge  ippusbxd

Danach Neustart.

Dann zeige

brsaneconfig4 -d

sowie

avahi-browse -rt _ipp._tcp | egrep "hostname|address|IP" | egrep =

andreas@andreas-MS-7A38:~$ dpkg -l | egrep 'ippusbxd|ipp-usb|libusb-0.1-4»system-config-printer-udev|Brother'
ii  brscan-skey                                0.3.1-2                             amd64        Brother Linux scanner S-KEY tool
ii  brscan4                                    0.4.11-1                            amd64        Brother Scanner Driver
ii  dcpl2500dcupswrapper:i386                  3.2.0-1                             i386         Brother DCP-L2500D CUPS wrapper driver
ii  dcpl2500dlpr:i386                          3.2.0-1                             i386         Brother DCP-L2500D LPR driver
ii  dcpl3510cdwpdrv:i386                       1.0.2-0                             i386         Brother Laser Printer Driver
ii  ippusbxd                                   1.34-2ubuntu1                       amd64        Daemon for IPP USB printer support
ii  printer-driver-brlaser                     6-1build1                           amd64        printer driver for (some) Brother laser printers
ii  printer-driver-ptouch                      1.4.2-3                             amd64        printer driver Brother P-touch label printers
andreas@andreas-MS-7A38:~$

andreas@andreas-MS-7A38:~$ brsaneconfig4 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=22c55c61-a2f7-494f-90fc-c5749fe3338a /               ext4    errors=remount-ro 0       1
# /home was on /dev/sdb1 during installation
UUID=d1106493-cbb4-4e5f-9eb2-0a4616b8adb1 /home           ext4    defaults        0       2
# swap was on /dev/sda6 during installation
UUID=7aa82b2c-c863-405d-937f-fc853f81c6f1 none            swap    sw              0       0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x062a/0x4c01 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x045e/0x0745 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden
-----------------------------
scanimage -L
device `brother4:net1;dev0' is a Brother DCP-L3510CDW DCP-L3510CDW
device `escl:http://192.168.178.20:80' is a ESCL Brother DCP-L3510CDW series flatbed scanner
-----------------------------
-----------------------------
ping
test DCP-L3510CDW
ping 192.168.178.1 -w 10

PING 192.168.178.1 (192.168.178.1) 56(84) Bytes Daten.
64 Bytes von 192.168.178.1: icmp_seq=1 ttl=64 Zeit=0.213 ms
64 Bytes von 192.168.178.1: icmp_seq=2 ttl=64 Zeit=0.220 ms
64 Bytes von 192.168.178.1: icmp_seq=3 ttl=64 Zeit=0.247 ms
64 Bytes von 192.168.178.1: icmp_seq=4 ttl=64 Zeit=0.205 ms
64 Bytes von 192.168.178.1: icmp_seq=5 ttl=64 Zeit=0.210 ms
64 Bytes von 192.168.178.1: icmp_seq=6 ttl=64 Zeit=0.208 ms
64 Bytes von 192.168.178.1: icmp_seq=7 ttl=64 Zeit=0.231 ms
64 Bytes von 192.168.178.1: icmp_seq=8 ttl=64 Zeit=0.223 ms
64 Bytes von 192.168.178.1: icmp_seq=9 ttl=64 Zeit=0.227 ms
64 Bytes von 192.168.178.1: icmp_seq=10 ttl=64 Zeit=0.209 ms

--- 192.168.178.1 ping-Statistik ---
10 Pakete übertragen, 10 empfangen, 0% Paketverlust, Zeit 9196ms
rtt min/avg/max/mdev = 0.205/0.219/0.247/0.012 ms
andreas@andreas-MS-7A38:~$ 

Solltest Scannen können. Zeige ansonsten

export SANE_DEBUG_DLL=255 && scanimage -L

andreas@andreas-MS-7A38:~$ avahi-browse -rt _ipp._tcp | egrep "hostname|address|IP" | egrep =
= enp27s0 IPv4 Brother DCP-L3510CDW series                   Internet Printer     local
   hostname = [BRW4CD577B1D1E4.local]
   address = [192.168.178.20]
= enp27s0 IPv6 Brother DCP-L3510CDW series                   Internet Printer     local
   hostname = [BRW4CD577B1D1E4.local]
   address = [192.168.178.20]
andreas@andreas-MS-7A38:~$

Hallo Andreas

Franke schrieb:

brsaneconfig -a name=FRIENDLY-NAME model=MODEL-NAME nodename=HOSTNAME

Ich stehe jetzt völlig auf dem Schlauch: MODEL-NAME und HOSTNAME ist mir klar. Aber was bitte ist FRIENDLY-NAME?

Das ist einfach ein frei wählbarer Name, wie Du den Drucker für Dich benutzerfreundlich (friendly) benennen willst. Also z.B. name=Drucker-Buero

Scannen fehlgeschlagen Verbindung zum Scanner konnte nicht hergestellt werden.

Zeige bitte, zusätzlich zu den geforderten Angaben von Kellerkind_2009, noch die Ausgabe der Brother Netzwerkscanner-Diagnose

brsaneconfig4 -d

dabei die markierte Zahl hinten durch die bei dir installierte Version ersetzen (2|3|4). Die Ausgaben bitte - der Lesbarkeit wegen - in einem Codeblock (, also in drei geschweiften Klammern → \{{{Deine kompletten Ausgaben}}}, was dann hier so aussieht

Gruss, Balu

Edit: Codeblock scheint klar zu sein... 😉

Leider geht Scannen immer noch nicht

andreas@andreas-MS-7A38:~$ export SANE_DEBUG_DLL=255 && scanimage -L
[17:33:06.266938] [sanei_debug] Setting debug level of dll to 255.
[17:33:06.267009] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29
[17:33:06.267023] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[17:33:06.267043] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[17:33:06.267062] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[17:33:06.267090] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/brother4
[17:33:06.267114] [dll] sane_init/read_config: reading dll.d/brother4
[17:33:06.267133] [dll] add_backend: adding backend `brother4'
[17:33:06.267147] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[17:33:06.267166] [dll] sane_init/read_config: reading dll.d/hplip
[17:33:06.267180] [dll] add_backend: adding backend `hpaio'
[17:33:06.267195] [dll] sane_init/read_dlld: done.
[17:33:06.267213] [dll] sane_init/read_config: reading dll.conf
[17:33:06.267231] [dll] add_backend: adding backend `net'
[17:33:06.267241] [dll] add_backend: adding backend `abaton'
[17:33:06.267251] [dll] add_backend: adding backend `agfafocus'
[17:33:06.267261] [dll] add_backend: adding backend `apple'
[17:33:06.267271] [dll] add_backend: adding backend `artec'
[17:33:06.267280] [dll] add_backend: adding backend `artec_eplus48u'
[17:33:06.267290] [dll] add_backend: adding backend `as6e'
[17:33:06.267299] [dll] add_backend: adding backend `avision'
[17:33:06.267308] [dll] add_backend: adding backend `bh'
[17:33:06.267317] [dll] add_backend: adding backend `canon'
[17:33:06.267327] [dll] add_backend: adding backend `canon630u'
[17:33:06.267336] [dll] add_backend: adding backend `canon_dr'
[17:33:06.267345] [dll] add_backend: adding backend `cardscan'
[17:33:06.267355] [dll] add_backend: adding backend `coolscan'
[17:33:06.267364] [dll] add_backend: adding backend `coolscan3'
[17:33:06.267374] [dll] add_backend: adding backend `dell1600n_net'
[17:33:06.267383] [dll] add_backend: adding backend `dmc'
[17:33:06.267393] [dll] add_backend: adding backend `epjitsu'
[17:33:06.267402] [dll] add_backend: adding backend `epson2'
[17:33:06.267411] [dll] add_backend: adding backend `epsonds'
[17:33:06.267421] [dll] add_backend: adding backend `escl'
[17:33:06.267431] [dll] add_backend: adding backend `fujitsu'
[17:33:06.267440] [dll] add_backend: adding backend `genesys'
[17:33:06.267450] [dll] add_backend: adding backend `gt68xx'
[17:33:06.267459] [dll] add_backend: adding backend `hp'
[17:33:06.267469] [dll] add_backend: adding backend `hp3500'
[17:33:06.267478] [dll] add_backend: adding backend `hp3900'
[17:33:06.267488] [dll] add_backend: adding backend `hp4200'
[17:33:06.267497] [dll] add_backend: adding backend `hp5400'
[17:33:06.267507] [dll] add_backend: adding backend `hp5590'
[17:33:06.267516] [dll] add_backend: adding backend `hpljm1005'
[17:33:06.267526] [dll] add_backend: adding backend `hpsj5s'
[17:33:06.267535] [dll] add_backend: adding backend `hs2p'
[17:33:06.267545] [dll] add_backend: adding backend `ibm'
[17:33:06.267554] [dll] add_backend: adding backend `kodak'
[17:33:06.267566] [dll] add_backend: adding backend `kodakaio'
[17:33:06.267576] [dll] add_backend: adding backend `kvs1025'
[17:33:06.267586] [dll] add_backend: adding backend `kvs20xx'
[17:33:06.267595] [dll] add_backend: adding backend `kvs40xx'
[17:33:06.267605] [dll] add_backend: adding backend `leo'
[17:33:06.267615] [dll] add_backend: adding backend `lexmark'
[17:33:06.267624] [dll] add_backend: adding backend `ma1509'
[17:33:06.267634] [dll] add_backend: adding backend `magicolor'
[17:33:06.267643] [dll] add_backend: adding backend `matsushita'
[17:33:06.267653] [dll] add_backend: adding backend `microtek'
[17:33:06.267663] [dll] add_backend: adding backend `microtek2'
[17:33:06.267672] [dll] add_backend: adding backend `mustek'
[17:33:06.267682] [dll] add_backend: adding backend `mustek_usb'
[17:33:06.267692] [dll] add_backend: adding backend `mustek_usb2'
[17:33:06.267702] [dll] add_backend: adding backend `nec'
[17:33:06.267711] [dll] add_backend: adding backend `niash'
[17:33:06.267721] [dll] add_backend: adding backend `pie'
[17:33:06.267731] [dll] add_backend: adding backend `pieusb'
[17:33:06.267740] [dll] add_backend: adding backend `pint'
[17:33:06.267750] [dll] add_backend: adding backend `pixma'
[17:33:06.267760] [dll] add_backend: adding backend `plustek'
[17:33:06.267770] [dll] add_backend: adding backend `qcam'
[17:33:06.267780] [dll] add_backend: adding backend `ricoh'
[17:33:06.267792] [dll] add_backend: adding backend `ricoh2'
[17:33:06.267802] [dll] add_backend: adding backend `rts8891'
[17:33:06.267812] [dll] add_backend: adding backend `s9036'
[17:33:06.267822] [dll] add_backend: adding backend `sceptre'
[17:33:06.267832] [dll] add_backend: adding backend `sharp'
[17:33:06.267842] [dll] add_backend: adding backend `sm3600'
[17:33:06.267852] [dll] add_backend: adding backend `sm3840'
[17:33:06.267862] [dll] add_backend: adding backend `snapscan'
[17:33:06.267872] [dll] add_backend: adding backend `sp15c'
[17:33:06.267882] [dll] add_backend: adding backend `tamarack'
[17:33:06.267892] [dll] add_backend: adding backend `teco1'
[17:33:06.267901] [dll] add_backend: adding backend `teco2'
[17:33:06.267911] [dll] add_backend: adding backend `teco3'
[17:33:06.267936] [dll] add_backend: adding backend `u12'
[17:33:06.267953] [dll] add_backend: adding backend `umax'
[17:33:06.267969] [dll] add_backend: adding backend `umax1220u'
[17:33:06.267986] [dll] add_backend: adding backend `v4l'
[17:33:06.268001] [dll] add_backend: adding backend `xerox_mfp'
[17:33:06.268012] [dll] add_backend: adding backend `brother4'
[17:33:06.268021] [dll] add_backend: `brother4' is already there
[17:33:06.268045] [dll] sane_get_devices
[17:33:06.268056] [dll] load: searching backend `brother4' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.268068] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother4.so.1'
[17:33:06.268085] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother4.so.1'
[17:33:06.268277] [dll] init: initializing backend `brother4'
[17:33:06.388285] [dll] init: backend `brother4' is version 1.0.1
[17:33:06.388308] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.388322] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[17:33:06.388341] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[17:33:06.388540] [dll] init: initializing backend `xerox_mfp'
[17:33:06.391300] [dll] init: backend `xerox_mfp' is version 1.0.13
[17:33:06.391371] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.391377] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[17:33:06.391385] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[17:33:06.391390] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[17:33:06.391397] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[17:33:06.391402] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[17:33:06.391409] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[17:33:06.391414] [dll] load: couldn't find backend `v4l' (No such file or directory)
[17:33:06.391419] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.391424] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[17:33:06.391433] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[17:33:06.391531] [dll] init: initializing backend `umax1220u'
[17:33:06.393653] [dll] init: backend `umax1220u' is version 1.0.2
[17:33:06.393663] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.393669] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[17:33:06.393677] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[17:33:06.393781] [dll] init: initializing backend `umax'
[17:33:06.399528] [dll] init: backend `umax' is version 1.0.45
[17:33:06.399549] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.399561] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[17:33:06.399579] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[17:33:06.399778] [dll] init: initializing backend `u12'
[17:33:06.401870] [dll] init: backend `u12' is version 1.0.0
[17:33:06.401877] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.401884] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[17:33:06.401893] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[17:33:06.401941] [dll] init: initializing backend `teco3'
[17:33:06.402477] [dll] init: backend `teco3' is version 1.0.1
[17:33:06.402485] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.402489] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[17:33:06.402496] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[17:33:06.402542] [dll] init: initializing backend `teco2'
[17:33:06.403462] [dll] init: backend `teco2' is version 1.0.10
[17:33:06.403468] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.403473] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[17:33:06.403480] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[17:33:06.403524] [dll] init: initializing backend `teco1'
[17:33:06.404143] [dll] init: backend `teco1' is version 1.0.10
[17:33:06.404151] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.404155] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[17:33:06.404163] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[17:33:06.404212] [dll] init: initializing backend `tamarack'
[17:33:06.404480] [dll] init: backend `tamarack' is version 1.0.0
[17:33:06.404487] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.404492] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[17:33:06.404499] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[17:33:06.404549] [dll] init: initializing backend `sp15c'
[17:33:06.404653] [dll] init: backend `sp15c' is version 1.0.0
[17:33:06.404659] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.404665] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[17:33:06.404673] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[17:33:06.404744] [dll] init: initializing backend `snapscan'
[17:33:06.406597] [dll] init: backend `snapscan' is version 1.4.53
[17:33:06.406605] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.406609] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[17:33:06.406616] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[17:33:06.406687] [dll] init: initializing backend `sm3840'
[17:33:06.408188] [dll] init: backend `sm3840' is version 1.0.0
[17:33:06.408196] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.408201] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[17:33:06.408210] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[17:33:06.408287] [dll] init: initializing backend `sm3600'
[17:33:06.409765] [dll] init: backend `sm3600' is version 1.0.6
[17:33:06.409773] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.409777] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[17:33:06.409784] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[17:33:06.409842] [dll] init: initializing backend `sharp'
[17:33:06.410119] [dll] init: backend `sharp' is version 1.0.0
[17:33:06.410126] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.410132] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[17:33:06.410139] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[17:33:06.410186] [dll] init: initializing backend `sceptre'
[17:33:06.410465] [dll] init: backend `sceptre' is version 1.0.10
[17:33:06.410472] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.410477] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[17:33:06.410485] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[17:33:06.410529] [dll] init: initializing backend `s9036'
[17:33:06.410716] [dll] init: backend `s9036' is version 1.0.0
[17:33:06.410723] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.410727] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[17:33:06.410736] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[17:33:06.410807] [dll] init: initializing backend `rts8891'
[17:33:06.412320] [dll] init: backend `rts8891' is version 1.0.2401
[17:33:06.412346] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.412352] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[17:33:06.412359] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[17:33:06.412429] [dll] init: initializing backend `ricoh2'
[17:33:06.413912] [dll] init: backend `ricoh2' is version 1.0.0
[17:33:06.413920] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.413925] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[17:33:06.413932] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[17:33:06.413987] [dll] init: initializing backend `ricoh'
[17:33:06.414177] [dll] init: backend `ricoh' is version 1.0.0
[17:33:06.414183] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.414188] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[17:33:06.414195] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[17:33:06.414241] [dll] init: initializing backend `qcam'
[17:33:06.414258] [dll] init: backend `qcam' is version 1.0.0
[17:33:06.414263] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.414267] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[17:33:06.414274] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[17:33:06.414348] [dll] init: initializing backend `plustek'
[17:33:06.415907] [dll] init: backend `plustek' is version 1.0.0
[17:33:06.415914] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.416003] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[17:33:06.416015] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[17:33:06.416137] [dll] init: initializing backend `pixma'
[17:33:06.417613] [dll] init: backend `pixma' is version 1.0.27
[17:33:06.938581] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.938628] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[17:33:06.938653] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[17:33:06.938664] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[17:33:06.938676] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[17:33:06.938685] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[17:33:06.938698] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[17:33:06.938707] [dll] load: couldn't find backend `pint' (No such file or directory)
[17:33:06.938716] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.938725] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[17:33:06.938746] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[17:33:06.939048] [dll] init: initializing backend `pieusb'
[17:33:06.942905] [dll] init: backend `pieusb' is version 1.0.1
[17:33:06.942923] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.942934] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[17:33:06.942949] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[17:33:06.943081] [dll] init: initializing backend `pie'
[17:33:06.944219] [dll] init: backend `pie' is version 1.0.9
[17:33:06.944236] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.944246] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[17:33:06.944261] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[17:33:06.944429] [dll] init: initializing backend `niash'
[17:33:06.948120] [dll] init: backend `niash' is version 1.0.1
[17:33:06.948139] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.948149] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[17:33:06.948166] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[17:33:06.948311] [dll] init: initializing backend `nec'
[17:33:06.948794] [dll] init: backend `nec' is version 1.0.0
[17:33:06.948810] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.948823] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[17:33:06.948841] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[17:33:06.949011] [dll] init: initializing backend `mustek_usb2'
[17:33:06.949037] [dll] init: backend `mustek_usb2' is version 1.0.10
[17:33:06.950882] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.950890] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[17:33:06.950897] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[17:33:06.950976] [dll] init: initializing backend `mustek_usb'
[17:33:06.952483] [dll] init: backend `mustek_usb' is version 1.0.18
[17:33:06.952491] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.952495] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[17:33:06.952501] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[17:33:06.952604] [dll] init: initializing backend `mustek'
[17:33:06.953082] [dll] init: backend `mustek' is version 1.0.138
[17:33:06.953090] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.953098] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[17:33:06.953108] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[17:33:06.953183] [dll] init: initializing backend `microtek2'
[17:33:06.953473] [dll] init: backend `microtek2' is version 1.0.0
[17:33:06.953483] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.953493] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[17:33:06.953501] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[17:33:06.953550] [dll] init: initializing backend `microtek'
[17:33:06.953821] [dll] init: backend `microtek' is version 1.0.0
[17:33:06.953827] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.953833] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[17:33:06.953840] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[17:33:06.953894] [dll] init: initializing backend `matsushita'
[17:33:06.954522] [dll] init: backend `matsushita' is version 1.0.7
[17:33:06.954529] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:06.954534] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[17:33:06.954541] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[17:33:06.954999] [dll] init: initializing backend `magicolor'
[17:33:06.956535] [dll] init: backend `magicolor' is version 1.0.1
[17:33:08.480384] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.480428] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[17:33:08.480454] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[17:33:08.480720] [dll] init: initializing backend `ma1509'
[17:33:08.484721] [dll] init: backend `ma1509' is version 1.0.3
[17:33:08.484740] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.484753] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[17:33:08.484771] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[17:33:08.484951] [dll] init: initializing backend `lexmark'
[17:33:08.488728] [dll] init: backend `lexmark' is version 1.0.32
[17:33:08.488794] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.488808] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[17:33:08.488824] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[17:33:08.488950] [dll] init: initializing backend `leo'
[17:33:08.489891] [dll] init: backend `leo' is version 1.0.11
[17:33:08.489909] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.489921] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[17:33:08.489939] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[17:33:08.490116] [dll] init: initializing backend `kvs40xx'
[17:33:08.493151] [dll] init: backend `kvs40xx' is version 1.0.1
[17:33:08.493420] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.493427] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[17:33:08.493434] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[17:33:08.493508] [dll] init: initializing backend `kvs20xx'
[17:33:08.494997] [dll] init: backend `kvs20xx' is version 1.0.2
[17:33:08.495505] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.495512] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[17:33:08.495519] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[17:33:08.495595] [dll] init: initializing backend `kvs1025'
[17:33:08.497108] [dll] init: backend `kvs1025' is version 1.0.5
[17:33:08.497116] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:08.497120] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[17:33:08.497127] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[17:33:08.497633] [dll] init: initializing backend `kodakaio'
[17:33:08.499140] [dll] init: backend `kodakaio' is version 1.0.3
[17:33:10.328484] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.328518] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[17:33:10.328544] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[17:33:10.328774] [dll] init: initializing backend `kodak'
[17:33:10.328805] [dll] init: backend `kodak' is version 1.0.7
[17:33:10.329171] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.329191] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[17:33:10.329211] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[17:33:10.329351] [dll] init: initializing backend `ibm'
[17:33:10.329896] [dll] init: backend `ibm' is version 1.0.0
[17:33:10.329913] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.329926] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[17:33:10.329945] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[17:33:10.330082] [dll] init: initializing backend `hs2p'
[17:33:10.330846] [dll] init: backend `hs2p' is version 1.0.0
[17:33:10.330862] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.330874] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[17:33:10.330900] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[17:33:10.331059] [dll] init: initializing backend `hpsj5s'
[17:33:10.331155] [dll] init: backend `hpsj5s' is version 1.0.3
[17:33:10.331175] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.331194] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[17:33:10.331216] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[17:33:10.331417] [dll] init: initializing backend `hpljm1005'
[17:33:10.335776] [dll] init: backend `hpljm1005' is version 1.0.1
[17:33:10.335797] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.335810] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[17:33:10.335837] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[17:33:10.336096] [dll] init: initializing backend `hp5590'
[17:33:10.338462] [dll] init: backend `hp5590' is version 1.0.8
[17:33:10.338474] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.338483] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[17:33:10.338498] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[17:33:10.338613] [dll] init: initializing backend `hp5400'
[17:33:10.340757] [dll] init: backend `hp5400' is version 1.0.3
[17:33:10.340767] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.340773] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[17:33:10.340782] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[17:33:10.340881] [dll] init: initializing backend `hp4200'
[17:33:10.343015] [dll] init: backend `hp4200' is version 1.0.0
[17:33:10.343025] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.343031] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[17:33:10.343039] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[17:33:10.343402] [dll] init: initializing backend `hp3900'
[17:33:10.345557] [dll] init: backend `hp3900' is version 1.0.0
[17:33:10.345567] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.345573] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[17:33:10.345582] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[17:33:10.345687] [dll] init: initializing backend `hp3500'
[17:33:10.347800] [dll] init: backend `hp3500' is version 1.0.0
[17:33:10.347815] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.347822] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[17:33:10.347834] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[17:33:10.347982] [dll] init: initializing backend `hp'
[17:33:10.348000] [dll] init: backend `hp' is version 1.0.8
[17:33:10.350007] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.350015] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[17:33:10.350022] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[17:33:10.350115] [dll] init: initializing backend `gt68xx'
[17:33:10.351705] [dll] init: backend `gt68xx' is version 1.0.84
[17:33:10.351761] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.351767] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[17:33:10.351775] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[17:33:10.352055] [dll] init: initializing backend `genesys'
[17:33:10.353859] [dll] init: backend `genesys' is version 1.0.0
[17:33:10.353902] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.353908] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[17:33:10.353917] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[17:33:10.353995] [dll] init: initializing backend `fujitsu'
[17:33:10.354007] [dll] init: backend `fujitsu' is version 1.0.134
[17:33:10.355669] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:10.355676] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[17:33:10.355683] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[17:33:10.359454] [dll] init: initializing backend `escl'
[17:33:10.359511] [dll] init: backend `escl' is version 1.0.0
[17:33:11.363850] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:11.363887] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[17:33:11.363932] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[17:33:11.364336] [dll] init: initializing backend `epsonds'
[17:33:11.368717] [dll] init: backend `epsonds' is version 1.0.0
[17:33:11.368791] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:11.368807] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[17:33:11.368826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[17:33:11.369065] [dll] init: initializing backend `epson2'
[17:33:11.373227] [dll] init: backend `epson2' is version 1.0.124
[17:33:12.374764] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.374808] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[17:33:12.374837] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[17:33:12.375145] [dll] init: initializing backend `epjitsu'
[17:33:12.375168] [dll] init: backend `epjitsu' is version 1.0.31
[17:33:12.379156] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.379174] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[17:33:12.379190] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[17:33:12.379331] [dll] init: initializing backend `dmc'
[17:33:12.379835] [dll] init: backend `dmc' is version 1.0.0
[17:33:12.379852] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.379864] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[17:33:12.379881] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[17:33:12.380072] [dll] init: initializing backend `dell1600n_net'
[17:33:12.380091] [dll] init: backend `dell1600n_net' is version 1.0.0
[17:33:12.680950] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.680997] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[17:33:12.681028] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[17:33:12.681333] [dll] init: initializing backend `coolscan3'
[17:33:12.685266] [dll] init: backend `coolscan3' is version 1.0.0
[17:33:12.685587] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.685603] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[17:33:12.685621] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[17:33:12.685873] [dll] init: initializing backend `coolscan'
[17:33:12.686601] [dll] init: backend `coolscan' is version 1.0.0
[17:33:12.686618] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.686629] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[17:33:12.686644] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[17:33:12.686821] [dll] init: initializing backend `cardscan'
[17:33:12.690531] [dll] init: backend `cardscan' is version 1.0.3
[17:33:12.690593] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.690606] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[17:33:12.690623] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[17:33:12.690821] [dll] init: initializing backend `canon_dr'
[17:33:12.690849] [dll] init: backend `canon_dr' is version 1.0.58
[17:33:12.693680] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.693687] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[17:33:12.693694] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[17:33:12.693773] [dll] init: initializing backend `canon630u'
[17:33:12.695274] [dll] init: backend `canon630u' is version 1.0.1
[17:33:12.695281] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.695285] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[17:33:12.695292] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[17:33:12.695348] [dll] init: initializing backend `canon'
[17:33:12.695462] [dll] init: backend `canon' is version 1.0.0
[17:33:12.695468] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.695474] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[17:33:12.695482] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[17:33:12.695534] [dll] init: initializing backend `bh'
[17:33:12.695809] [dll] init: backend `bh' is version 1.0.4
[17:33:12.695816] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.695820] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[17:33:12.695829] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[17:33:12.695910] [dll] init: initializing backend `avision'
[17:33:12.702809] [dll] init: backend `avision' is version 1.0.297
[17:33:12.708300] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.708307] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[17:33:12.708314] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[17:33:12.708366] [dll] init: initializing backend `as6e'
[17:33:12.708386] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.708391] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[17:33:12.708398] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[17:33:12.708473] [dll] init: initializing backend `artec_eplus48u'
[17:33:12.710034] [dll] init: backend `artec_eplus48u' is version 1.0.0
[17:33:12.710043] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.710047] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[17:33:12.710053] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[17:33:12.710110] [dll] init: initializing backend `artec'
[17:33:12.710387] [dll] init: backend `artec' is version 1.0.0
[17:33:12.710394] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.710401] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[17:33:12.710407] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[17:33:12.710461] [dll] init: initializing backend `apple'
[17:33:12.710730] [dll] init: backend `apple' is version 1.0.0
[17:33:12.710737] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.710741] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[17:33:12.710748] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[17:33:12.710808] [dll] init: initializing backend `agfafocus'
[17:33:12.710994] [dll] init: backend `agfafocus' is version 1.0.0
[17:33:12.711001] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.711007] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[17:33:12.711016] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[17:33:12.711066] [dll] init: initializing backend `abaton'
[17:33:12.711339] [dll] init: backend `abaton' is version 1.0.0
[17:33:12.711346] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.711352] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[17:33:12.711360] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[17:33:12.711445] [dll] init: initializing backend `net'
[17:33:12.713357] [dll] init: backend `net' is version 1.0.29
[17:33:12.713372] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[17:33:12.713379] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[17:33:12.713394] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[17:33:12.714092] [dll] init: initializing backend `hpaio'
[17:33:12.714772] [dll] init: backend `hpaio' is version 1.0.0
[17:33:14.425623] [dll] sane_get_devices: found 2 devices
device `brother4:net1;dev0' is a Brother DCP-L3510CDW DCP-L3510CDW
device `escl:http://192.168.178.20:80' is a ESCL Brother DCP-L3510CDW series flatbed scanner
[17:33:14.425659] [dll] sane_exit: exiting
[17:33:14.425671] [dll] sane_exit: calling backend `brother4's exit function
[17:33:14.425886] [dll] sane_exit: calling backend `xerox_mfp's exit function
[17:33:14.425955] [dll] sane_exit: calling backend `umax1220u's exit function
[17:33:14.426022] [dll] sane_exit: calling backend `umax's exit function
[17:33:14.426086] [dll] sane_exit: calling backend `u12's exit function
[17:33:14.426144] [dll] sane_exit: calling backend `teco3's exit function
[17:33:14.426198] [dll] sane_exit: calling backend `teco2's exit function
[17:33:14.426248] [dll] sane_exit: calling backend `teco1's exit function
[17:33:14.426297] [dll] sane_exit: calling backend `tamarack's exit function
[17:33:14.426343] [dll] sane_exit: calling backend `sp15c's exit function
[17:33:14.426391] [dll] sane_exit: calling backend `snapscan's exit function
[17:33:14.426443] [dll] sane_exit: calling backend `sm3840's exit function
[17:33:14.426494] [dll] sane_exit: calling backend `sm3600's exit function
[17:33:14.426547] [dll] sane_exit: calling backend `sharp's exit function
[17:33:14.426594] [dll] sane_exit: calling backend `sceptre's exit function
[17:33:14.426639] [dll] sane_exit: calling backend `s9036's exit function
[17:33:14.426683] [dll] sane_exit: calling backend `rts8891's exit function
[17:33:14.426733] [dll] sane_exit: calling backend `ricoh2's exit function
[17:33:14.426817] [dll] sane_exit: calling backend `ricoh's exit function
[17:33:14.426863] [dll] sane_exit: calling backend `qcam's exit function
[17:33:14.426907] [dll] sane_exit: calling backend `plustek's exit function
[17:33:14.426960] [dll] sane_exit: calling backend `pixma's exit function
[17:33:14.427015] [dll] sane_exit: calling backend `pieusb's exit function
[17:33:14.427073] [dll] sane_exit: calling backend `pie's exit function
[17:33:14.427121] [dll] sane_exit: calling backend `niash's exit function
[17:33:14.427167] [dll] sane_exit: calling backend `nec's exit function
[17:33:14.427212] [dll] sane_exit: calling backend `mustek_usb2's exit function
[17:33:14.427260] [dll] sane_exit: calling backend `mustek_usb's exit function
[17:33:14.427312] [dll] sane_exit: calling backend `mustek's exit function
[17:33:14.427366] [dll] sane_exit: calling backend `microtek2's exit function
[17:33:14.427416] [dll] sane_exit: calling backend `microtek's exit function
[17:33:14.427465] [dll] sane_exit: calling backend `matsushita's exit function
[17:33:14.427508] [dll] sane_exit: calling backend `magicolor's exit function
[17:33:14.427557] [dll] sane_exit: calling backend `ma1509's exit function
[17:33:14.427607] [dll] sane_exit: calling backend `lexmark's exit function
[17:33:14.427683] [dll] sane_exit: calling backend `leo's exit function
[17:33:14.427731] [dll] sane_exit: calling backend `kvs40xx's exit function
[17:33:14.427780] [dll] sane_exit: calling backend `kvs20xx's exit function
[17:33:14.427827] [dll] sane_exit: calling backend `kvs1025's exit function
[17:33:14.427873] [dll] sane_exit: calling backend `kodakaio's exit function
[17:33:14.427937] [dll] sane_exit: calling backend `kodak's exit function
[17:33:14.428053] [dll] sane_exit: calling backend `ibm's exit function
[17:33:14.428116] [dll] sane_exit: calling backend `hs2p's exit function
[17:33:14.428164] [dll] sane_exit: calling backend `hpsj5s's exit function
[17:33:14.428224] [dll] sane_exit: calling backend `hpljm1005's exit function
[17:33:14.428269] [dll] sane_exit: calling backend `hp5590's exit function
[17:33:14.428320] [dll] sane_exit: calling backend `hp5400's exit function
[17:33:14.428369] [dll] sane_exit: calling backend `hp4200's exit function
[17:33:14.428415] [dll] sane_exit: calling backend `hp3900's exit function
[17:33:14.428465] [dll] sane_exit: calling backend `hp3500's exit function
[17:33:14.428511] [dll] sane_exit: calling backend `hp's exit function
[17:33:14.428563] [dll] sane_exit: calling backend `gt68xx's exit function
[17:33:14.428641] [dll] sane_exit: calling backend `genesys's exit function
[17:33:14.428780] [dll] sane_exit: calling backend `fujitsu's exit function
[17:33:14.428809] [dll] sane_exit: calling backend `escl's exit function
[17:33:14.429094] [dll] sane_exit: calling backend `epsonds's exit function
[17:33:14.429116] [dll] sane_exit: calling backend `epson2's exit function
[17:33:14.429137] [dll] sane_exit: calling backend `epjitsu's exit function
[17:33:14.429156] [dll] sane_exit: calling backend `dmc's exit function
[17:33:14.429172] [dll] sane_exit: calling backend `dell1600n_net's exit function
[17:33:14.429226] [dll] sane_exit: calling backend `coolscan3's exit function
[17:33:14.429246] [dll] sane_exit: calling backend `coolscan's exit function
[17:33:14.429263] [dll] sane_exit: calling backend `cardscan's exit function
[17:33:14.429281] [dll] sane_exit: calling backend `canon_dr's exit function
[17:33:14.429299] [dll] sane_exit: calling backend `canon630u's exit function
[17:33:14.429316] [dll] sane_exit: calling backend `canon's exit function
[17:33:14.429332] [dll] sane_exit: calling backend `bh's exit function
[17:33:14.429348] [dll] sane_exit: calling backend `avision's exit function
[17:33:14.429375] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[17:33:14.429393] [dll] sane_exit: calling backend `artec's exit function
[17:33:14.429410] [dll] sane_exit: calling backend `apple's exit function
[17:33:14.429425] [dll] sane_exit: calling backend `agfafocus's exit function
[17:33:14.429439] [dll] sane_exit: calling backend `abaton's exit function
[17:33:14.429453] [dll] sane_exit: calling backend `net's exit function
[17:33:14.430061] [dll] sane_exit: calling backend `hpaio's exit function
[17:33:14.430951] [dll] sane_exit: finished
andreas@andreas-MS-7A38:~$ 

Deine Ausgabe ist im Spam Ordner gelandet. Konntest du Scannen?

Nein, ich konnte nicht scannen. Was heißt im Spam Ordner gelandet? Was mache ich falsch.

Hast nichts falsch gemacht 😉 Der Filter ist hier im Forum nur sehr "Stramm" 😀

Führe mal aus

brsaneconfig4 -a name=Wlan-Scanner-Brother model=DCP-L3510CDW nodename=BRW4CD577B1D1E4.local

und wähle den Wlan-Scanner-Brother zum Scannen.

Funktioniert?

Franke schrieb:

Was heißt im Spam Ordner gelandet?

Dir wurde nach dem Absenden angezeigt, dass dein Beitrag erst von den Moderatoren freigeschalten werden muss. Diese Vorsichtsmassnahme dient der Spamabwehr.

Was mache ich falsch.

Nichts.