|
pepre
Supporter
Anmeldungsdatum:
31. Oktober 2005
Beiträge: 6450
|
im Alsamixer (siehe Anhang) kann ich noch immer nicht die Pegelstände verändern → sind auf 0, und somit auch kein Ton.
Die stehen nicht auf Null, sondern auf "O" wie "On" 😀 Da es digitale Kanäle sind (aka SPDIF) sind keine Regler da, die sind nur an oder aus. Du installierst jetzt pavucontrol und testest durch, ob du einen Ton raus bekommst. Wenn das nicht klappt, dann bitte die Ausgabe von
cat /proc/asound/cards hier einstellen. Dann können wir mit speaker-test die Kanäle gezielt testen.
Noch: warum 16.04 und nicht 18.04? Gibt's da einen zwingenden Grund?
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: Zähle...
|
Hallo pepre, danke für Hilfestellung.
im Alsamixer (siehe Anhang) kann ich noch immer nicht die Pegelstände verändern → sind auf 0, und somit auch kein Ton.
Die stehen nicht auf Null, sondern auf "O" wie "On" 😀 Da es digitale Kanäle sind (aka SPDIF) sind keine Regler da, die sind nur an oder aus.
... das muss man auch wissen, danke.
Du installierst jetzt pavucontrol und testest durch, ob du einen Ton raus bekommst.
bitte die Anlage sichten, habe leider keinen Ton raus bekommen. cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7110000 irq 30
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7080000 irq 17
Noch: warum 16.04 und nicht 18.04? Gibt's da einen zwingenden Grund?
Ja, da Dualsystem (Win7 u. Ubuntu) mittels Grub das gut läuft. Wenn ich das angehe auf nächstes LTS, dann zusammen mit Win10.x. Nur derzeit keinen Nerv und Zeit dafür → Diese Baustelle auf Sommer verschoben.
- Bilder
|
|
pepre
Supporter
Anmeldungsdatum:
31. Oktober 2005
Beiträge: 6450
|
Wieso steht da "unplugged"?! 🙄 Ok, scheint aber keine Tonausgabe zu verhindern¹, dennoch merkwürdig... Also, dein Device heißt NVIDIA und zum Testen ginge das:
speaker-test -c2 -D hw:NVIDIA
# bzw
speaker-test -c2 -D plughw:NVIDIA
Wenn das keinen Erfolg zeitig, dann bitte
aplay -l ausführen. Da gibt es ggf noch Gerätenummern, die man auch durchprobieren kann/muss:
### Allgemein:
### speakertest -c2 -D hw:CARD,GERÄT
# zum Beispiel:
speaker-test -c2 -D hw:NVIDIA,3
¹ https://www.reddit.com/r/linuxquestions/comments/440ck0/pulseaudio_shows_hdmi_audio_as_unplugged_when/ und https://askubuntu.com/questions/781726/hdmi-recognized-as-unplugged-after-installing-drivers
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: 487
|
Wieso steht da "unplugged"?! 🙄
... das kann ich leider nicht ergründen. Ich habe mal zwischendurch das HDMI-Kabel am Monitor ab/angesteckt (Bild war logischer weise weg und wieder da, mit kurzem Krachen der Lautsprecher). Danke für die Tipps und Hilfestellung. Sieht derzeit leider nicht gut aus. Speakertest war auch nicht erfolgreich, oder ich habe bei den Kommandos was falsch gemacht. -Ubuntu-PC:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: VT1708S Analog [VT1708S Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 2: VT1708S Alt Analog [VT1708S Alt Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: VT1708S Digital [VT1708S Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 7: HDMI 1 [HDMI 1]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 8: HDMI 2 [HDMI 2]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 9: HDMI 3 [HDMI 3]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
... es werden doch dies die richtigen Geräte sein, oder? → Karte 1: NVidia [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0] ...bis zum Gerät 9/HDMI3 Befehle waren einzeln von HDMI 0 bis 4, jedoch selbe negative Ergebnis. -Ubuntu-PC:~$ speaker-test -c2 -D hw:NVIDIA,0
speaker-test 1.1.0
Wiedergabe-Gerät ist hw:NVIDIA,0
Stream-Parameter sind 48000 Hz, S16_LE, 2 Kanäle
Verwende 16 Oktaven rosa Rauschen
ALSA lib pcm_hw.c:1700:(_snd_pcm_hw_open) Invalid value for card
Fehler beim Öffnen des Gerätes: -19, Kein passendes Gerät gefunden
Danke für die Links https://askubuntu.com/questions/7817alling-drivers. Den habe ich mal abgearbeitet, leider ohne Erfolg. -Ubuntu-PC:~$ pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0b"
device.product.name = "GK106 HDMI Audio Controller"
device.string = "1"
device.description = "GK106 HDMI Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Ausgang (priority 5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Ausgang (priority 300, available: unknown)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Ausgang (priority 300, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Ausgang (priority 5200, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Ausgang (priority 5200, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Ausgang (priority 100, available: unknown)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Ausgang (priority 100, available: unknown)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Ausgang (priority 5200, available: unknown)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Ausgang (priority 100, available: unknown)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Ausgang (priority 100, available: unknown)
off: Aus (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: GK106 HDMI Audio Controller Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of GK106 HDMI Audio Controller Digital Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
device.product.name = "GM2600
"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7110000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller (P8H77-I Motherboard)"
device.form_factor = "internal"
device.string = "0"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Eingang (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Ausgang (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Ausgang (priority 5400, available: unknown)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Ausgang + Analog Stereo Eingang (priority 5460, available: unknown)
off: Aus (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.hdmi-stereo/#1: Internes Audio Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_00_1b.0.hdmi-stereo.monitor/#1: Monitor of Internes Audio Digital Stereo (HDMI)
ports:
analog-input-front-mic: Mikrofon vorne (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Mikrofon hinten (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: yes)
properties:
analog-output-lineout: Line-Ausgang (priority 9900, latency offset 0 usec, available: no)
properties:
analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "video-display"
der Befehl lt. dem Threat wäre doch: pacmd set-card-profile 1 output:hdmi-stereo oder liege ich da falsch? geklappt hat es jedenfals nicht. Schon komisch!
|
|
Kellerkind_2009
Anmeldungsdatum:
26. November 2009
Beiträge: 19527
|
Zeige noch aplay -L Öffne ein Terminal und lasse es offen alsactl monitor Stecke nun den HDMI mal ein und aus.Zeige auch hiervon die Ausgabe.
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: 487
|
Zeige noch aplay -L
Ubuntu-PC:~$ aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=PCH
HDA Intel PCH, VT1708S Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Digital
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=2
HDA Intel PCH, VT1708S Alt Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, VT1708S Digital
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=2
HDA Intel PCH, VT1708S Alt Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
HDA Intel PCH, VT1708S Digital
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=2
HDA Intel PCH, VT1708S Alt Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, VT1708S Digital
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, VT1708S Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=2
HDA Intel PCH, VT1708S Alt Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, VT1708S Digital
Hardware device with all software conversions
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
dmix:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample mixing device
dmix:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Direct sample mixing device
dmix:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Direct sample mixing device
dmix:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Direct sample mixing device
dsnoop:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Direct sample snooping device
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Hardware device with all software conversions
Stecke nun den HDMI mal ein und aus.Zeige auch hiervon die Ausgabe.
-Ubuntu-PC:~$ alsactl monitor
card 1, #12 (3,7,0,ELD,0) VALUE INFO
card 1, #12 (3,7,0,ELD,0) VALUE INFO
|
|
Kellerkind_2009
Anmeldungsdatum:
26. November 2009
Beiträge: 19527
|
Demnach wird erkannt das du HDMI einsteckst. Teste diese Varianten durch bei eingestecktem HDMI hw:CARD=NVidia,DEV=3
hw:CARD=NVidia,DEV=7
hw:CARD=NVidia,DEV=8
hw:CARD=NVidia,DEV=9
plughw:CARD=NVidia,DEV=3
plughw:CARD=NVidia,DEV=7
plughw:CARD=NVidia,DEV=8
plughw:CARD=NVidia,DEV=9
Beispiel beim ersten speaker-test -c6 -D hw:CARD=NVidia,DEV=3
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: 487
|
Ah ha, danke. Mit welcher Taste/Kombination kann ich den laufenden Prozess vom Versuch im Terminal unterbrechen um den nächsten anzustoßen?
|
|
Kellerkind_2009
Anmeldungsdatum:
26. November 2009
Beiträge: 19527
|
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: 487
|
Danke. habe die Durchläufe gemacht, anbei das Ergebnis. Ton hab ich keinen gehört. Mir ist aufgefallen, dass ich vor dem Einloggen oben rechts das Lautsprechersymbol habe, nach dem Einloggen ist dies nicht mehr der Fall (das ist so seit dem ich das "Tonproblem" mit dem HDMI habe). -Ubuntu-PC:~$ speaker-test -c6 -D hw:CARD=NVidia,DEV=3
speaker-test 1.1.0
Wiedergabe-Gerät ist hw:CARD=NVidia,DEV=3
Stream-Parameter sind 48000 Hz, S16_LE, 6 Kanäle
Verwende 16 Oktaven rosa Rauschen
Rate ist 48000 Hz (angefordert: 48000 Hz)
Puffergröße von 64 bis 5440
Periodengröße von 32 bis 2720
Verwende maximale Puffergröße 5440
Perioden = 4
gesetzt: period_size = 1088
gesetzt: buffer_size = 5440
0 - Front Left
4 - Front Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 17,843908
0 - Front Left
4 - Front Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 17,951967
0 - Front Left
^C 4 - Front Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 0,348615
-Ubuntu-PC:~$ speaker-test -c6 -D hw:CARD=NVidia,DEV=7
speaker-test 1.1.0
Wiedergabe-Gerät ist hw:CARD=NVidia,DEV=7
Stream-Parameter sind 48000 Hz, S16_LE, 6 Kanäle
Verwende 16 Oktaven rosa Rauschen
Kanal-Anzahl 6 nicht unterstützt: Das Argument ist ungültig
Fehler beim Setzen der Hardware-Parameter: Das Argument ist ungültig
-Ubuntu-PC:~$ speaker-test -c6 -D hw:CARD=NVidia,DEV=8
speaker-test 1.1.0
Wiedergabe-Gerät ist hw:CARD=NVidia,DEV=8
Stream-Parameter sind 48000 Hz, S16_LE, 6 Kanäle
Verwende 16 Oktaven rosa Rauschen
Rate ist 48000 Hz (angefordert: 48000 Hz)
Puffergröße von 64 bis 5440
Periodengröße von 32 bis 2720
Verwende maximale Puffergröße 5440
Perioden = 4
gesetzt: period_size = 1088
gesetzt: buffer_size = 5440
0 - Front Left
4 - Front Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 17,843947
0 - Front Left
4 - Front Center
1 - Front Right
^C 3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 8,179247
-Ubuntu-PC:~$ speaker-test -c6 -D hw:CARD=NVidia,DEV=9
speaker-test 1.1.0
Wiedergabe-Gerät ist hw:CARD=NVidia,DEV=9
Stream-Parameter sind 48000 Hz, S16_LE, 6 Kanäle
Verwende 16 Oktaven rosa Rauschen
Rate ist 48000 Hz (angefordert: 48000 Hz)
Puffergröße von 64 bis 5440
Periodengröße von 32 bis 2720
Verwende maximale Puffergröße 5440
Perioden = 4
gesetzt: period_size = 1088
gesetzt: buffer_size = 5440
0 - Front Left
4 - Front Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 17,843925
0 - Front Left
^C 4 - Front Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Zeit pro Periode = 1,174656
|
|
Kellerkind_2009
Anmeldungsdatum:
26. November 2009
Beiträge: 19527
|
Schließe HDMI an,spiele ein Film oder ähnliches ab und zeige mal pactl list sinks short pacmd info
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: 487
|
Das HDMI ist nach wie vor angesteckt.
Ich habe im Internet von der Mediathek des ORF was laufen lassen, da die Ergebnisse. -Ubuntu-PC:~$ pactl list sinks short
0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
1 alsa_output.pci-0000_00_1b.0.hdmi-stereo module-alsa-card.c s16le 2ch 48000Hz RUNNING
-Ubuntu-PC:~$ pacmd info
Memory blocks currently allocated: 25, size: 337,3 KB.
Memory blocks allocated during the whole lifetime: 10345, size: 57,9 MB.
Memory blocks imported from other processes: 9, size: 190,2 KB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 11,5 KB.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.hdmi-stereo
Default source name: alsa_output.pci-0000_00_1b.0.hdmi-stereo.monitor
Memory blocks of type POOL: 16 allocated/4941 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/2985 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/4348 accumulated.
Memory blocks of type IMPORTED: 9 allocated/1056 accumulated.
26 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "8.0"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "8.0"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "8.0"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "8.0"
index: 4
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: no
properties:
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "8.0"
index: 6
name: <module-alsa-card>
argument: <device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
index: 7
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
used: 1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
index: 8
name: <module-bluetooth-policy>
argument: <>
used: -1
load once: yes
properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "8.0"
index: 9
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "8.0"
index: 10
name: <module-bluez5-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "8.0"
index: 11
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "8.0"
index: 12
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "8.0"
index: 13
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "8.0"
index: 14
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Hält stets einen Sink geladen, selbst wenn dies ein Null-Sink ist"
module.version = "8.0"
index: 15
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "8.0"
index: 16
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "8.0"
index: 17
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "8.0"
index: 18
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "8.0"
index: 19
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "8.0"
index: 20
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "8.0"
index: 21
name: <module-x11-publish>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "8.0"
index: 22
name: <module-x11-bell>
argument: <display=:0 sample=bell.ogg>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "8.0"
index: 23
name: <module-x11-cork-request>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "8.0"
index: 24
name: <module-x11-xsmp>
argument: <display=:0 session_manager=local/johannes-Ubuntu-PC:@/tmp/.ICE-unix/1898,unix/johannes-Ubuntu-PC:/tmp/.ICE-unix/1898>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "8.0"
index: 25
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "8.0"
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9050
volume: front-left: 45905 / 70% / -9,28 dB, front-right: 45905 / 70% / -9,28 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0b"
device.product.name = "GK106 HDMI Audio Controller"
device.string = "hdmi:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "GK106 HDMI Audio Controller Digital Stereo (HDMI)"
alsa.mixer_name = "Nvidia GPU 41 HDMI/DP"
alsa.components = "HDA:10de0041,19da4263,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-0>
* index: 1
name: <alsa_output.pci-0000_00_1b.0.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9950
volume: front-left: 77251 / 118% / 4,29 dB, front-right: 77251 / 118% / 4,29 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 51,28 ms
max request: 14 KiB
max rewind: 64 KiB
monitor source: 1
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 75,00 ms; range is 0,50 .. 341,33 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1708S Digital"
alsa.id = "VT1708S Digital"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7110000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller (P8H77-I Motherboard)"
device.form_factor = "internal"
device.string = "hdmi:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Internes Audio Digital Stereo (HDMI)"
alsa.mixer_name = "VIA VT1708S"
alsa.components = "HDA:11060397,10438415,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-0>
2 source(s) available.
index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1050
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_01_00.1>
module: 6
properties:
device.description = "Monitor of GK106 HDMI Audio Controller Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0b"
device.product.name = "GK106 HDMI Audio Controller"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_output.pci-0000_00_1b.0.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 1950
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 64 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 341,33 ms; range is 0,50 .. 341,33 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Internes Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7110000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller (P8H77-I Motherboard)"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
9 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 17
properties:
application.name = "Login Session c2"
systemd-login.session = "c2"
index: 1
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "Ubuntu Audio Settings"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "com.canonical.settings.sound"
application.icon_name = "multimedia-volume-control"
application.version = "0.1"
application.process.id = "1962"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "indicator-sound-service"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
index: 2
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "Ubuntu Audio Settings"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "com.canonical.settings.sound"
application.icon_name = "multimedia-volume-control"
application.version = "0.1"
application.process.id = "1962"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "indicator-sound-service"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
index: 4
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "1.0"
application.process.id = "1890"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "unity-settings-daemon"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
index: 8
driver: <module-x11-xsmp.c>
owner module: 24
properties:
application.name = "XSMP Session on gnome-session as 10520ad285c2e2e7ba157943824545734900000018980049"
xsmp.vendor = "gnome-session"
xsmp.client.id = "10520ad285c2e2e7ba157943824545734900000018980049"
index: 10
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.icon_name = "firefox"
application.version = "72.0.1"
application.process.id = "2617"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "firefox"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
index: 14
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2617"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "firefox"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
application.icon_name = "firefox"
index: 25
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1890"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "unity-settings-daemon"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
index: 31
driver: <cli.c>
owner module: 25
properties:
application.name = "UNIX socket client"
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0b"
device.product.name = "GK106 HDMI Audio Controller"
device.string = "1"
device.description = "GK106 HDMI Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Ausgang (priority 5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Ausgang (priority 300, available: unknown)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Ausgang (priority 300, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Ausgang (priority 5200, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Ausgang (priority 5200, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Ausgang (priority 100, available: unknown)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Ausgang (priority 100, available: unknown)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Ausgang (priority 5200, available: unknown)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Ausgang (priority 100, available: unknown)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Ausgang (priority 100, available: unknown)
off: Aus (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: GK106 HDMI Audio Controller Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of GK106 HDMI Audio Controller Digital Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
device.product.name = "GM2600
"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7110000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller (P8H77-I Motherboard)"
device.form_factor = "internal"
device.string = "0"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Eingang (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Ausgang (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Ausgang (priority 5400, available: unknown)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Ausgang + Analog Stereo Eingang (priority 5460, available: unknown)
off: Aus (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.hdmi-stereo/#1: Internes Audio Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_00_1b.0.hdmi-stereo.monitor/#1: Monitor of Internes Audio Digital Stereo (HDMI)
ports:
analog-input-front-mic: Mikrofon vorne (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Mikrofon hinten (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: yes)
properties:
analog-output-lineout: Line-Ausgang (priority 9900, latency offset 0 usec, available: no)
properties:
analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "video-display"
1 sink input(s) available.
index: 16
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
sink: 1 <alsa_output.pci-0000_00_1b.0.hdmi-stereo>
volume: front-left: 60838 / 93% / -1,94 dB, front-right: 60838 / 93% / -1,94 dB
balance 0,00
muted: no
current latency: 125,00 ms
requested latency: 75,00 ms
sample spec: float32le 2ch 48000Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 11
client: 14 <Firefox>
properties:
media.name = "AudioStream"
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2617"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "firefox"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
application.icon_name = "firefox"
module-stream-restore.id = "sink-input-by-application-name:Firefox"
0 source output(s) available.
1 cache entrie(s) available.
name: <audio-volume-change>
index: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
length: 11776
duration: 0,1 s
volume: n/a
balance 0,00
lazy: no
filename: <n/a>
properties:
media.role = "event"
event.description = "volume changed through key press"
event.id = "audio-volume-change"
media.name = "audio-volume-change"
media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1890"
application.process.user = "johannes"
application.process.host = "johannes-Ubuntu-PC"
application.process.binary = "unity-settings-daemon"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "b68f1e0d92af4ab7a28d78f6a7113ab7"
application.process.session_id = "c2"
|
|
Kellerkind_2009
Anmeldungsdatum:
26. November 2009
Beiträge: 19527
|
Sieht eigentlich gut aus 1 alsa_output.pci-0000_00_1b.0.hdmi-stereo module-alsa-card.c s16le 2ch 48000Hz RUNNING
module-stream-restore.id = "sink-input-by-application-name:Firefox" zeige mal noch lspci -nnk | grep -A4 "\[03..\]:"
|
|
xunilu
(Themenstarter)
Anmeldungsdatum:
22. April 2007
Beiträge: 487
|
-Ubuntu-PC:~$ lspci -nnk | grep -A4 "\[03..\]:"
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 650 Ti] [10de:11c6] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. GK106 [GeForce GTX 650 Ti] [19da:4263]
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_384_drm, nvidia_384
01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1)
|
|
Kellerkind_2009
Anmeldungsdatum:
26. November 2009
Beiträge: 19527
|
Der Nvidia wird Verwendet.Was kannst du am TV bei Ton/Hdmi Einstellen?
|
