|
Anmeldungsdatum: Beiträge: 361 |
Moin Mein Drucker weigert sich zu arbeiten! OS Ubuntu 16.04.4 AMD 64 Drucker HP LaserJet CP1025 color. Woran liegts? Moderiert von Taomon: Dieses Thema ist verschoben worden. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“)! Bearbeitet von ChickenLipsRfun2eat: HTitel angepasst. Bitte verwende einen aussagekräftigen Titel! |
Anmeldungsdatum: Beiträge: 19527 |
|
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 361 |
Ubuntu 16.04.4 mate habe ich installiert. Der Drucker hat sich nach dem Zuschalten gemeldet und wurde installiert. Die Aufträge zum Testdruck und Aufträge von LibreOffice wanderten in die Warteschlange und wurden auch angezeigt aber eben nicht gedruckt. Mit dem Wiki HP laserjet 10 xx kann ich so nichts anfangen. Das finde ich nicht. /usr/share/ppd/foo2zjs/. Die beiden Befehle sudo hp-setup und sudo hp-firmware haben nichts bewirkt. |
|
Anmeldungsdatum: Beiträge: 19527 |
Zeige die Ausgabe von hp-check -r |
Anmeldungsdatum: Beiträge: 3230 |
Hallo phalstek, folgender Vorschlag: Entferne alle vorhandenen Druckereinstellungen - installiere Dir dann die folgenden Pakete: hplip hplip-data hplip-doc hplip-gui Danach startest Du das HP-Setup-Programm und richtest Deinen Drucker ein. Bye HS |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 361 |
wolf@wolf-desktop:~$ hp-check -r
Saving output in log file: /home/wolf/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 4.13.0-45-generic #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 GNU/Linux
Host: wolf-desktop
Proc: 4.13.0-45-generic #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 GNU/Linux
Distribution: ubuntu 16.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.3
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 16.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.3
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a
[installation]
date_time = 06/12/18 18:12:49
version = 3.16.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
error: dbus DBus - Message bus system REQUIRED - 1.10.6 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.18 OK -
network network -wget OPTIONAL - 1.17.1 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.5.2 MISSING 'python3-devel needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.2 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 MISSING 'libcrypto needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
python3-xml Python XML libraries REQUIRED - 2.1.0 OK -
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.23' MISSING 'libpthread needs to be installed'
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
---------------
| COMPILEDEP |
---------------
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
----------------------
| Python Extentions |
----------------------
hpmudext IO-Extension REQUIRED - 3.16.3 OK -
cupsext CUPS-Extension REQUIRED - 3.16.3 OK -
-----------------------
| Scan Configuration |
-----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.3 OK -
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.3 OK 'hpaio found in /etc/sane.d/dll.conf'
-----------------------
| Other Dependencies |
-----------------------
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-CP-1025
-------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a
PPD: /etc/cups/ppd/HP-LaserJet-CP-1025.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-CP-1025.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-CP-1025 is idle. enabled since Di 12 Jun 2018 18:10Rendering completed
error: Required plug-in status: Not installed
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
Plug-in Status
--------------
error: Plug-ins need to be installed
Total Errors: 19
Total Warnings: 0
Done.
wolf@wolf-desktop:~$
Ist das OK ? |
|
Anmeldungsdatum: Beiträge: 19527 |
Nei,das ist alles andere als i.O. error: dbus error: cups error: libtool error: gcc error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a error: Device not found error: Communication status: Failed Total Errors: 19 Zeige mal die Ausgabe von sudo apt-get install --reinstall cups gcc dbus libtool
dpkg -l gcc dbus libtool hplip-* hplip |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 361 |
wolf@wolf-desktop:~$ sudo apt-get install --reinstall cups gcc dbus libtool
[sudo] Passwort für wolf:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden zusätzlichen Pakete werden Installiert
autotools-dev gcc-5 libasan2 libatomic1 libc-dev-bin libc6-dev libcc1-0
libcilkrts5 libgcc-5-dev libitm1 liblsan0 libltdl-dev libmpx0 libtsan0
libubsan0 linux-libc-dev manpages-dev
Vorgeschlagene Pakete:
gcc-multilib autoconf automake flex bison gcc-doc gcc-5-multilib gcc-5-doc
gcc-5-locales libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg
libasan2-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg
libmpx0-dbg libquadmath0-dbg glibc-doc libtool-doc automaken gfortran
| fortran95-compiler gcj-jdk
Die folgenden NEUEN Pakete werden installiert:
autotools-dev gcc gcc-5 libasan2 libatomic1 libc-dev-bin libc6-dev libcc1-0
libcilkrts5 libgcc-5-dev libitm1 liblsan0 libltdl-dev libmpx0 libtool
libtsan0 libubsan0 linux-libc-dev manpages-dev
0 aktualisiert, 19 neu installiert, 2 erneut installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 17,5 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 64,0 MB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 dbus amd64 1.10.6-1ubuntu3.3 [142 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 autotools-dev all 20150820.1 [39,8 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 cups amd64 2.1.3-4ubuntu0.4 [192 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libcc1-0 amd64 5.4.0-6ubuntu1~16.04.9 [38,8 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libitm1 amd64 5.4.0-6ubuntu1~16.04.9 [27,4 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libatomic1 amd64 5.4.0-6ubuntu1~16.04.9 [8.882 B]
Holen:7 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libasan2 amd64 5.4.0-6ubuntu1~16.04.9 [264 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 liblsan0 amd64 5.4.0-6ubuntu1~16.04.9 [105 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libtsan0 amd64 5.4.0-6ubuntu1~16.04.9 [244 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libubsan0 amd64 5.4.0-6ubuntu1~16.04.9 [95,2 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libcilkrts5 amd64 5.4.0-6ubuntu1~16.04.9 [40,1 kB]
Holen:12 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libmpx0 amd64 5.4.0-6ubuntu1~16.04.9 [9.774 B]
Holen:13 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgcc-5-dev amd64 5.4.0-6ubuntu1~16.04.9 [2.242 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 gcc-5 amd64 5.4.0-6ubuntu1~16.04.9 [8.650 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 gcc amd64 4:5.3.1-1ubuntu1 [5.244 B]
Holen:16 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libc-dev-bin amd64 2.23-0ubuntu10 [68,7 kB]
Holen:17 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-libc-dev amd64 4.4.0-128.154 [876 kB]
Holen:18 http://de.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libc6-dev amd64 2.23-0ubuntu10 [2.079 kB]
Holen:19 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 libltdl-dev amd64 2.4.6-0.1 [162 kB]
Holen:20 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 libtool all 2.4.6-0.1 [193 kB]
Holen:21 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 manpages-dev all 4.04-2 [2.048 kB]
Es wurden 17,5 MB in 1 s geholt (11,6 MB/s).
Vorkonfiguration der Pakete ...
(Lese Datenbank ... 254685 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../dbus_1.10.6-1ubuntu3.3_amd64.deb ...
Entpacken von dbus (1.10.6-1ubuntu3.3) über (1.10.6-1ubuntu3.3) ...
Vormals nicht ausgewähltes Paket autotools-dev wird gewählt.
Vorbereitung zum Entpacken von .../autotools-dev_20150820.1_all.deb ...
Entpacken von autotools-dev (20150820.1) ...
Vorbereitung zum Entpacken von .../cups_2.1.3-4ubuntu0.4_amd64.deb ...
Entpacken von cups (2.1.3-4ubuntu0.4) über (2.1.3-4ubuntu0.4) ...
Vormals nicht ausgewähltes Paket libcc1-0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libcc1-0_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libcc1-0:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libitm1:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libitm1_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libitm1:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libatomic1:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libatomic1_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libatomic1:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libasan2:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libasan2_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libasan2:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket liblsan0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../liblsan0_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von liblsan0:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libtsan0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libtsan0_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libtsan0:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libubsan0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libubsan0_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libubsan0:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libcilkrts5:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libcilkrts5_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libcilkrts5:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libmpx0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libmpx0_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libmpx0:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket libgcc-5-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libgcc-5-dev_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von libgcc-5-dev:amd64 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket gcc-5 wird gewählt.
Vorbereitung zum Entpacken von .../gcc-5_5.4.0-6ubuntu1~16.04.9_amd64.deb ...
Entpacken von gcc-5 (5.4.0-6ubuntu1~16.04.9) ...
Vormals nicht ausgewähltes Paket gcc wird gewählt.
Vorbereitung zum Entpacken von .../gcc_4%3a5.3.1-1ubuntu1_amd64.deb ...
Entpacken von gcc (4:5.3.1-1ubuntu1) ...
Vormals nicht ausgewähltes Paket libc-dev-bin wird gewählt.
Vorbereitung zum Entpacken von .../libc-dev-bin_2.23-0ubuntu10_amd64.deb ...
Entpacken von libc-dev-bin (2.23-0ubuntu10) ...
Vormals nicht ausgewähltes Paket linux-libc-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../linux-libc-dev_4.4.0-128.154_amd64.deb ...
Entpacken von linux-libc-dev:amd64 (4.4.0-128.154) ...
Vormals nicht ausgewähltes Paket libc6-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libc6-dev_2.23-0ubuntu10_amd64.deb ...
Entpacken von libc6-dev:amd64 (2.23-0ubuntu10) ...
Vormals nicht ausgewähltes Paket libltdl-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libltdl-dev_2.4.6-0.1_amd64.deb ...
Entpacken von libltdl-dev:amd64 (2.4.6-0.1) ...
Vormals nicht ausgewähltes Paket libtool wird gewählt.
Vorbereitung zum Entpacken von .../libtool_2.4.6-0.1_all.deb ...
Entpacken von libtool (2.4.6-0.1) ...
Vormals nicht ausgewähltes Paket manpages-dev wird gewählt.
Vorbereitung zum Entpacken von .../manpages-dev_4.04-2_all.deb ...
Entpacken von manpages-dev (4.04-2) ...
Trigger für systemd (229-4ubuntu21.2) werden verarbeitet ...
Trigger für ureadahead (0.100.0-19) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
Trigger für man-db (2.7.5-1) werden verarbeitet ...
Trigger für libc-bin (2.23-0ubuntu10) werden verarbeitet ...
dbus (1.10.6-1ubuntu3.3) wird eingerichtet ...
A reboot is required to replace the running dbus-daemon.
Please reboot the system when convenient.
autotools-dev (20150820.1) wird eingerichtet ...
cups (2.1.3-4ubuntu0.4) wird eingerichtet ...
Updating PPD files for cups ...
libcc1-0:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libitm1:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libatomic1:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libasan2:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
liblsan0:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libtsan0:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libubsan0:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libcilkrts5:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libmpx0:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
libgcc-5-dev:amd64 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
gcc-5 (5.4.0-6ubuntu1~16.04.9) wird eingerichtet ...
gcc (4:5.3.1-1ubuntu1) wird eingerichtet ...
libc-dev-bin (2.23-0ubuntu10) wird eingerichtet ...
linux-libc-dev:amd64 (4.4.0-128.154) wird eingerichtet ...
libc6-dev:amd64 (2.23-0ubuntu10) wird eingerichtet ...
libltdl-dev:amd64 (2.4.6-0.1) wird eingerichtet ...
libtool (2.4.6-0.1) wird eingerichtet ...
manpages-dev (4.04-2) wird eingerichtet ...
Trigger für libc-bin (2.23-0ubuntu10) werden verarbeitet ...
wolf@wolf-desktop:~$ dpkg -l gcc dbus libtool hplip-* hplip
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==============-============-============-=================================
ii dbus 1.10.6-1ubun amd64 simple interprocess messaging sys
ii gcc 4:5.3.1-1ubu amd64 GNU C compiler
ii hplip 3.16.3+repac amd64 HP Linux Printing and Imaging Sys
un hplip-cups <keine> <keine> (keine Beschreibung vorhanden)
ii hplip-data 3.16.3+repac all HP Linux Printing and Imaging - d
un hplip-doc <keine> <keine> (keine Beschreibung vorhanden)
un hplip-gui <keine> <keine> (keine Beschreibung vorhanden)
ii libtool 2.4.6-0.1 all Generic library support script
wolf@wolf-desktop:~$
Jetzt ist alles Paletti? |
|
Anmeldungsdatum: Beiträge: 19527 |
Sieht erst mal gut aus.Nun Funktioniert der Drucker? Ansonsten wieder hp-check -r sowie sudo lpstat -p |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 361 |
wolf@wolf-desktop:~$ hp-check -r
Saving output in log file: /home/wolf/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 4.13.0-45-generic #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 GNU/Linux
Host: wolf-desktop
Proc: 4.13.0-45-generic #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 GNU/Linux
Distribution: ubuntu 16.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.3
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 16.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.3
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a
[installation]
date_time = 06/12/18 19:31:56
version = 3.16.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.18 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
network network -wget OPTIONAL - 1.17.1 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
error: dbus DBus - Message bus system REQUIRED - 1.10.6 MISSING 'DBUS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.5.2 MISSING 'python3-devel needs to be installed'
python3-xml Python XML libraries REQUIRED - 2.1.0 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.2 OK -
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 MISSING 'libcrypto needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.23' OK -
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
---------------
| COMPILEDEP |
---------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - 5.4.0 MISSING 'gcc needs to be installed'
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
----------------------
| Python Extentions |
----------------------
hpmudext IO-Extension REQUIRED - 3.16.3 OK -
cupsext CUPS-Extension REQUIRED - 3.16.3 OK -
-----------------------
| Scan Configuration |
-----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.3 OK -
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.3 OK 'hpaio found in /etc/sane.d/dll.conf'
-----------------------
| Other Dependencies |
-----------------------
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -------------------
hp:/usb/HP_LaserJet_CP_1025?seri HP LaserJet CP 1025
al=0W040BVYPR1a
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-CP-1025
-------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a
PPD: /etc/cups/ppd/HP-LaserJet-CP-1025.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-CP-1025.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-CP-1025 is idle. enabled since Di 12 Jun 2018 18:35:24 CEST
error: Required plug-in status: Not installed
Communication status: Good
HP-LaserJet-CP-1025@sonja-HP.local
----------------------------------
Type: Unknown
Device URI: ipps://sonja-HP.local:631/printers/HP-LaserJet-CP-1025
--------------
| PERMISSION |
--------------
USB HP-LaserJet-CP-1025 Required - - OK Node:'/dev/bus/usb/001/006' Perm:' root lp rw- rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
Plug-in Status
--------------
error: Plug-ins need to be installed
Total Errors: 17
Total Warnings: 0
Done.
wolf@wolf-desktop:~$ sudo lpstat -p
[sudo] Passwort für wolf:
printer HP-LaserJet-CP-1025 is idle. enabled since Di 12 Jun 2018 18:35:24 CEST
printer HP-LaserJet-CP-1025@sonja-HP.local now printing HP-LaserJet-CP-1025@sonja-HP.local-5. enabled since Di 12 Jun 2018 19:29:16 CEST
Rendering completed
wolf@wolf-desktop:~$
Nein druckt nicht. Jetzt werden 2 Drucker angezeigt! |
|
Anmeldungsdatum: Beiträge: 19527 |
Dann wie STRAGIC-IT vorgeschlagen hat.Drucker abklemmen! Beide Drucker zuerst aus system-config-printer löschen! Danach Hp zuerst löschen sudo apt purge hplip hplip-data Danach erst cups wieder neu Einrichten sudo apt-get install --reinstall cups Danach Hp wieder Installieren sudo apt install hplip hplip-data Drucker wieder einstecken und Setup ausführen hp-setup -i so würde ich es jetzt machen. |
|
Anmeldungsdatum: Beiträge: 8018 |
Moin Moin, https://axebase.net/blog/2014/12/05/installation-hp-linux-imaging-and-printing/ Was klappt daran nicht? Gruß |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 361 |
HP Linux Imaging and Printing System (ver. 3.18.5) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. HP Linux Imaging and Printing System (ver. 3.18.5) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Checking for Deprecated items.... No Deprecated items are found Checking for HPLIP updates.... HP Linux Imaging and Printing System (ver. 3.18.5) HPLIP upgrade latest version ver. 1.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Latest version of HPLIP is already installed. Checking for Dependencies.... --------------- | SYSTEM INFO | --------------- Kernel: 4.13.0-45-generic #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 GNU/Linux Host: wolf-desktop Proc: 4.13.0-45-generic #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 GNU/Linux Distribution: 12 16.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.18.5 HPLIP-Home: /usr/share/hplip HPLIP-Installation: Auto installation is supported for ubuntu distro 16.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.18.5 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP ppdbase=/usr/share/ppd doc=/usr/share/doc/hplip-3.18.5 html=/usr/share/doc/hplip-3.18.5 icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv/hp bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=no foomatic-drv-install=no foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.18.5 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes qt5=no policy-kit=no lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=yes class-driver=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden Current contents of '~/.hplip/hplip.conf' file: [upgrade] notify_upgrade = true last_upgraded_time = 1528874244 pending_upgrade_time = 0 latest_available_version = 3.17.10 [settings] systray_visible = 0 systray_messages = 0 [last_used] device_uri = "hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a" printer_name = HP-LaserJet-CP-1025 working_dir = . [commands] scan = /usr/bin/xsane -V %SANE_URI% [refresh] rate = 30 enable = false type = 1 [polling] enable = false interval = 5 device_list = [fax] voice_phone = email_address = [installation] date_time = 13.06.2018 10:44:30 version = 3.18.5 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> -------------- | COMPILEDEP | -------------- gcc gcc - GNU Project C and C++ Compiler REQUIRED - 5.4.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK - libtool libtool - Library building support services REQUIRED - 2.4.6 OK - ------------------------ | General Dependencies | ------------------------ libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 OK - python-xml Python XML libraries REQUIRED - 2.1.0 OK - libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK - sane-devel SANE - Scanning library development files REQUIRED - 1.0.25 OK - pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK - pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.11.4 OK - libpthread libpthread - POSIX threads library REQUIRED - 2.23 OK - python-devel Python devel - Python development files REQUIRED 2.2 2.7.12 OK - cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.1.3 OK - python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK - cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK - reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK - pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK - libusb libusb - USB library REQUIRED - 1.0 OK - cups-image CUPS image - CUPS image development files REQUIRED - 2.1.3 OK - python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.12 OK - python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - libjpeg libjpeg - JPEG library REQUIRED - - OK - sane SANE - Scanning library REQUIRED - 1.0.25 OK - ---------------------- | Scan Configuration | ---------------------- scanext Scan-SANE-Extension REQUIRED - 3.18.5 OK - hpaio HPLIP-SANE-Backend REQUIRED - 3.18.5 OK 'hpaio found in /etc/sane.d/dll.conf' ------------------------- | External Dependencies | ------------------------- gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.18 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK - cups CUPS - Common Unix Printing System REQUIRED 1.1 2.1.3 OK 'CUPS Scheduler is running' network network -wget OPTIONAL - 1.17.1 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - dbus DBus - Message bus system REQUIRED - 1.10.6 OK - avahi-utils avahi-utils OPTIONAL - 0.6.32 OK - --------------------- | Python Extentions | --------------------- hpmudext IO-Extension REQUIRED - 3.18.5 OK - cupsext CUPS-Extension REQUIRED - 3.18.5 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ No Scanner found. -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- ------------------- hp:/usb/HP_LaserJet_CP_1025?seri HP LaserJet CP 1025 al=0W040BVYPR1a --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP-LaserJet-CP-1025 ------------------- Type: Printer Device URI: hp:/usb/HP_LaserJet_CP_1025?serial=0W040BVYPR1a PPD: /etc/cups/ppd/HP-LaserJet-CP-1025.ppd warning: Failed to read /etc/cups/ppd/HP-LaserJet-CP-1025.ppd ppd file PPD Description: Printer status: printer HP-LaserJet-CP-1025 is idle. enabled since Mi 13 Jun 2018 10:26ready to print error: Required plug-in status: Not installed Communication status: Good -------------- | PERMISSION | -------------- USB HP-LaserJet-CP-1025 Required - - OK Node:'/dev/bus/usb/001/004' Perm:' root lp rw- rw- rw- rw- rw- r--' Checking Permissions.... Checking for Configured Queues.... warning: Fail to read ppd=/etc/cups/ppd/HP-LaserJet-CP-1025.ppd file warning: Insufficient permission to access file /etc/cups/ppd/HP-LaserJet-CP-1025.ppd warning: Could not complete Queue(s) configuration check Checking for HP Properitery Plugin's.... Plugin's are missing. Press 'y' to install the plugin(y=yes*, n=no):y Segmentation fault Failed to install Plugin. Please run 'hp-plugin' command to install plugin manually Diagnose completed... More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html Please close this terminal manually. Druckt nicht. Wie kann ich alles was zu dieser Konfiguration gehört radikal löschen. |
|
Anmeldungsdatum: Beiträge: 19527 |
Hmm,doch wieder alles anders gemacht. HP Linux Imaging and Printing System (ver. 3.18.5) Das Gerät wird erkannt Printer status: printer HP-LaserJet-CP-1025 is idle. enabled since Mi 13 Jun 2018 10:26ready to print error: Required plug-in status: Not installed Communication status: Good wegen dem hier Plugin's are missing. Press 'y' to install the plugin(y=yes*, n=no):y Versuche mal hp-plugin -i |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 361 |
wolf@wolf-desktop:~$ hp-plugin -i HP Linux Imaging and Printing System (ver. 3.18.5) Plugin Download and Install Utility ver. 2.1 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. HP Linux Imaging and Printing System (ver. 3.18.5) Plugin Download and Install Utility ver. 2.1 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.) ----------------------------------------- | PLUG-IN INSTALLATION FOR HPLIP 3.18.5 | ----------------------------------------- Option Description ---------- -------------------------------------------------- d Download plug-in from HP (recommended) p Specify a path to the plug-in (advanced) q Quit hp-plugin (skip installation) Enter option (d=download*, p=specify path, q=quit) ? Welche Option? Was danach? |
