staging.inyokaproject.org

Ich habe noch nie so viel über menschliches Verhalten gelernt wie zu Zeiten von Corona ☺ und jetzt sogar von von.Wert, wie man es hier richtig macht. Kein Scherz, ich finde lernen wirklich Klasse.

thomas@Romeo-Feliz:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 8087:0a2a Intel Corp. 
Bus 001 Device 007: ID 0bdc:4691 Y Media Corp. 
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 006: ID 0461:4e84 Primax Electronics, Ltd USB2.0 HUB
Bus 001 Device 004: ID 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

thomas@Romeo-Feliz:~$ avahi-browse -rt _ipp._tcp

thomas@Romeo-Feliz:~$ id
uid=1000(thomas) gid=1000(thomas) Gruppen=1000(thomas),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),120(lpadmin),131(lxd),132(sambashare)

thomas@Romeo-Feliz:~$ systemctl --no-pager status cups*
● cups.service - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
TriggeredBy: ● cups.socket
             ● cups.path
       Docs: man:cupsd(8)
   Main PID: 1084 (cupsd)
      Tasks: 3 (limit: 8194)
     Memory: 18.8M
     CGroup: /system.slice/cups.service
             ├─ 1084 /usr/sbin/cupsd -l
             ├─ 1190 /usr/lib/cups/notifier/dbus dbus://
             └─11148 /usr/lib/cups/notifier/dbus dbus://
thomas@Romeo-Feliz:~$ systemctl --no-pager status cups*
● cups.service - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
TriggeredBy: ● cups.socket
             ● cups.path
       Docs: man:cupsd(8)
   Main PID: 1084 (cupsd)
      Tasks: 3 (limit: 8194)
     Memory: 18.8M
     CGroup: /system.slice/cups.service
             ├─ 1084 /usr/sbin/cupsd -l
             ├─ 1190 /usr/lib/cups/notifier/dbus dbus://
             └─11148 /usr/lib/cups/notifier/dbus dbus://

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started CUPS Scheduler.

● cups.socket - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service
     Listen: /run/cups/cups.sock (Stream)
     CGroup: /system.slice/cups.socket

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Listening on CUPS Scheduler.

● cups-browsed.service - Make remote CUPS printers available locally
     Loaded: loaded (/lib/systemd/system/cups-browsed.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Main PID: 1097 (cups-browsed)
      Tasks: 3 (limit: 8194)
     Memory: 3.6M
     CGroup: /system.slice/cups-browsed.service
             └─1097 /usr/sbin/cups-browsed

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started Make remote CUPS printers a…lly.

● cups.path - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
     Active: active (waiting) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started CUPS Scheduler.
Hint: Some lines were ellipsized, use -l to show in full.

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started CUPS Scheduler.

● cups.socket - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service
     Listen: /run/cups/cups.sock (Stream)
     CGroup: /system.slice/cups.socket

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Listening on CUPS Scheduler.

● cups-browsed.service - Make remote CUPS printers available locally
     Loaded: loaded (/lib/systemd/system/cups-browsed.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Main PID: 1097 (cups-browsed)
      Tasks: 3 (limit: 8194)
     Memory: 3.6M
     CGroup: /system.slice/cups-browsed.service
             └─1097 /usr/sbin/cups-browsed

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started Make remote CUPS printers a…lly.

● cups.path - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
     Active: active (waiting) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started CUPS Scheduler.
Hint: Some lines were ellipsized, use -l to show in full.

Ok,nach dieser Ausgabe

thomas@Romeo-Feliz:~$ lpstat -s
systemvoreingestelltes Ziel: Kyocera
Gerät für FS-1061DN: usb://Kyocera/FS-1061DN?serial=R6W1713833
Gerät für Kyocera: socket://192.168.1.100:9100

sollte er ja über USB/Netz zu finden sein .. deine Abfragen zeigen aber weder noch! Wo ist er hin ❓ War er eingeschaltet?

Weil auch Cups auf ihn wartet .. seit 8 Stunden 😉

● cups.path - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
     Active: active (waiting) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service

Ooohhh weh, das ist mir jetzt wirklich peinlich. Ja, ich hatte ihn zwischenzeitlich ausgeschaltet 😢

Also noch einmal .....

thomas@Romeo-Feliz:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 8087:0a2a Intel Corp. 
Bus 001 Device 007: ID 0bdc:4691 Y Media Corp. 
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 006: ID 0461:4e84 Primax Electronics, Ltd USB2.0 HUB
Bus 001 Device 009: ID 0482:04fc Kyocera Corp. 
Bus 001 Device 004: ID 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

thomas@Romeo-Feliz:~$ systemctl --no-pager status cups*
● cups.service - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
TriggeredBy: ● cups.socket
             ● cups.path
       Docs: man:cupsd(8)
   Main PID: 1084 (cupsd)
      Tasks: 3 (limit: 8194)
     Memory: 19.6M
     CGroup: /system.slice/cups.service
             ├─ 1084 /usr/sbin/cupsd -l
             ├─ 1190 /usr/lib/cups/notifier/dbus dbus://
             └─11148 /usr/lib/cups/notifier/dbus dbus://

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started CUPS Scheduler.
Nov 15 19:28:58 Romeo-Feliz /hpfax[18809]: [18809]: error: Failed to create…plip

● cups.socket - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service
     Listen: /run/cups/cups.sock (Stream)
     CGroup: /system.slice/cups.socket

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Listening on CUPS Scheduler.

● cups-browsed.service - Make remote CUPS printers available locally
     Loaded: loaded (/lib/systemd/system/cups-browsed.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Main PID: 1097 (cups-browsed)
      Tasks: 3 (limit: 8194)
     Memory: 3.3M
     CGroup: /system.slice/cups-browsed.service
             └─1097 /usr/sbin/cups-browsed

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started Make remote CUPS printers a…lly.

● cups.path - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
     Active: active (waiting) since Mon 2021-11-15 10:39:51 CET; 8h ago
   Triggers: ● cups.service

Nov 15 10:39:51 Romeo-Feliz systemd[1]: Started CUPS Scheduler.
Hint: Some lines were ellipsized, use -l to show in full.

Wir schalten mal den debug Modus ein

sudo cupsctl --debug-logging

Dann startest du mal neu,gibst dann folgendes ein

cups-browsed -v

und führst einen Testdruck aus.Zeige die Ausgabe des Terminals,sowie danach von

tail -n 250 /var/log/cups/error_log

Mal sehen ob wir was finden.

thomas@Romeo-Feliz:~$ cups-browsed -v
Mon Nov 15 19:58:48 2021 Reading command line option -v, turning on debug mode (Log on standard error).
Mon Nov 15 19:58:48 2021 cups-browsed of cups-filters version 1.27.4 starting.
Mon Nov 15 19:58:48 2021 Reading config: BrowseRemoteProtocols dnssd cups
Mon Nov 15 19:58:48 2021 No "Browse..." line at all, accept all servers ("BrowseOrder Deny,Allow").
Mon Nov 15 19:58:48 2021 main() in THREAD 140054975294144
Mon Nov 15 19:58:48 2021 cups-browsed: Creating http connection to local CUPS daemon via domain socket: /var/run/cups/cups.sock
Mon Nov 15 19:58:48 2021 update_netifs() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 Network interfaces: lo (127.0.0.1, localhost), wlp1s0 (192.168.1.102, Romeo-Feliz, 192.168.1.102*), lo (::1, ip6-localhost), wlp1s0 (fe80::c1c3:9121:205d:413b)
Mon Nov 15 19:58:50 2021 cups-browsed [BrowsePoll /var/run/cups/cups.sock:0]: IPP-Create-Subscription
Mon Nov 15 19:58:50 2021 cups-browsed [BrowsePoll /var/run/cups/cups.sock:0]: subscription ID=397
Mon Nov 15 19:58:50 2021 cups-browsed (/var/run/cups/cups.sock): cupsEnumDests
Mon Nov 15 19:58:50 2021 Printer FS-1061DN: usb://Kyocera/FS-1061DN?serial=R6W1713833, c4eac844-4215-3ebf-7348-474433ff7dfd
Mon Nov 15 19:58:50 2021 Printer Kyocera: socket://192.168.1.100:9100, 2c6b1b81-abe8-301e-6710-bf9c550c42d6
Mon Nov 15 19:58:50 2021 Could not determine system default printer!
Mon Nov 15 19:58:50 2021 find_previous_queue() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 find_previous_queue() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 Using signal handler SIGACTION
Mon Nov 15 19:58:50 2021 Avahi server connection got available, setting up service browsers.
Mon Nov 15 19:58:50 2021 failed to bind CUPS Browsing socket: Permission denied
Mon Nov 15 19:58:50 2021 listening
Mon Nov 15 19:58:50 2021 browse_callback() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 Avahi Browser: CACHE_EXHAUSTED
Mon Nov 15 19:58:50 2021 browse_callback() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 Avahi Browser: ALL_FOR_NOW
Mon Nov 15 19:58:50 2021 browse_callback() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 Avahi Browser: CACHE_EXHAUSTED
Mon Nov 15 19:58:50 2021 browse_callback() in THREAD 140054975294144
Mon Nov 15 19:58:50 2021 Avahi Browser: ALL_FOR_NOW

manuell abgebrochen

thomas@Romeo-Feliz:~$ sudo tail -n 250 /var/log/cups/error_log
[sudo] Passwort für thomas: 
D [15/Nov/2021:19:57:51 +0100] [Client 8] Accepted from localhost (Domain)
D [15/Nov/2021:19:57:51 +0100] [Client 8] Waiting for request.
D [15/Nov/2021:19:57:51 +0100] [Client 8] POST / HTTP/1.1
D [15/Nov/2021:19:57:51 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:51 +0100] [Client 8] Read: status=200, state=6
D [15/Nov/2021:19:57:51 +0100] [Client 8] No authentication data provided.
D [15/Nov/2021:19:57:51 +0100] [Client 8] 2.0 Create-Printer-Subscriptions 2
D [15/Nov/2021:19:57:51 +0100] Create-Printer-Subscriptions /
D [15/Nov/2021:19:57:51 +0100] create_subscriptions(con=0x5577de4af9d0(8), uri="/")
D [15/Nov/2021:19:57:51 +0100] recipient="dbus://"
D [15/Nov/2021:19:57:51 +0100] pullmethod="ippget"
D [15/Nov/2021:19:57:51 +0100] notify-lease-duration=3600
D [15/Nov/2021:19:57:51 +0100] notify-time-interval=0
D [15/Nov/2021:19:57:51 +0100] cupsdAddSubscription(mask=798f, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [15/Nov/2021:19:57:51 +0100] Added subscription #396 for server.
D [15/Nov/2021:19:57:51 +0100] cupsdMarkDirty(----S)
D [15/Nov/2021:19:57:51 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:51 +0100] [Client 8] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [15/Nov/2021:19:57:51 +0100] [Client 8] Content-Length: 107
D [15/Nov/2021:19:57:51 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:57:51 +0100] [Client 8] con->http=0x5577de4b0b90
D [15/Nov/2021:19:57:51 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5577de48f1e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:57:51 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:57:51 +0100] [Client 8] bytes=0, http_state=0, data_remaining=107
D [15/Nov/2021:19:57:51 +0100] [Client 8] Flushing write buffer.
D [15/Nov/2021:19:57:51 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:57:51 +0100] [Client 8] Waiting for request.
D [15/Nov/2021:19:57:51 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:51 +0100] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [15/Nov/2021:19:57:51 +0100] [Client 8] Closing connection.
D [15/Nov/2021:19:57:51 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:51 +0100] [CGI] \033[31;01merror: Failed to create /var/spool/cups/tmp/.hplip\033[0m
D [15/Nov/2021:19:57:51 +0100] [Client 7] CGI data ready to be sent.
D [15/Nov/2021:19:57:51 +0100] [CGI] Flushed attributes...
D [15/Nov/2021:19:57:51 +0100] [cups-deviced] Found device \"hpfax\"...
D [15/Nov/2021:19:57:51 +0100] [Client 7] con->http=0x5577de4ac330
D [15/Nov/2021:19:57:51 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1897, file=19
D [15/Nov/2021:19:57:51 +0100] [Client 7] Waiting for CGI data.
D [15/Nov/2021:19:57:51 +0100] [Client 7] con->http=0x5577de4ac330
D [15/Nov/2021:19:57:51 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1897, file=19
D [15/Nov/2021:19:57:51 +0100] [Client 7] Waiting for CGI data.
D [15/Nov/2021:19:57:51 +0100] [cups-deviced] PID 1902 (hpfax) exited with no errors.
I [15/Nov/2021:19:57:52 +0100] Expiring subscriptions...
D [15/Nov/2021:19:57:52 +0100] [Client 7] CGI data ready to be sent.
D [15/Nov/2021:19:57:52 +0100] [CGI] PID 1913 (ippfind) was terminated normally with signal 0!
D [15/Nov/2021:19:57:52 +0100] [CGI] PID 1914 (Post-processing) exited with no errors.
D [15/Nov/2021:19:57:52 +0100] PID 1897 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [15/Nov/2021:19:57:52 +0100] [Client 7] con->http=0x5577de4ac330
D [15/Nov/2021:19:57:52 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1897, file=19
D [15/Nov/2021:19:57:52 +0100] [Client 7] Waiting for CGI data.
D [15/Nov/2021:19:57:52 +0100] [Client 7] con->http=0x5577de4ac330
D [15/Nov/2021:19:57:52 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1897, file=19
D [15/Nov/2021:19:57:52 +0100] [Client 7] Waiting for CGI data.
D [15/Nov/2021:19:57:52 +0100] [Client 7] CGI data ready to be sent.
D [15/Nov/2021:19:57:52 +0100] [Client 7] con->http=0x5577de4ac330
D [15/Nov/2021:19:57:52 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1897, file=19
D [15/Nov/2021:19:57:52 +0100] [Client 7] Waiting for CGI data.
D [15/Nov/2021:19:57:52 +0100] [Client 7] Sending 0-length chunk.
D [15/Nov/2021:19:57:52 +0100] [Client 7] Flushing write buffer.
D [15/Nov/2021:19:57:52 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:57:52 +0100] [Client 7] Waiting for request.
D [15/Nov/2021:19:57:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:52 +0100] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [15/Nov/2021:19:57:52 +0100] [Client 7] Closing connection.
D [15/Nov/2021:19:57:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [15/Nov/2021:19:57:52 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Nov/2021:19:57:52 +0100] [Client 9] Server address is "/run/cups/cups.sock".
D [15/Nov/2021:19:57:52 +0100] [Client 9] Accepted from localhost (Domain)
D [15/Nov/2021:19:57:52 +0100] [Client 9] Waiting for request.
D [15/Nov/2021:19:57:52 +0100] [Client 9] POST / HTTP/1.1
D [15/Nov/2021:19:57:52 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:52 +0100] [Client 9] Read: status=200, state=6
D [15/Nov/2021:19:57:52 +0100] [Client 9] No authentication data provided.
D [15/Nov/2021:19:57:52 +0100] [Client 9] 2.0 CUPS-Get-Printers 2
D [15/Nov/2021:19:57:52 +0100] CUPS-Get-Printers
D [15/Nov/2021:19:57:52 +0100] [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [15/Nov/2021:19:57:52 +0100] [Client 9] Content-Length: 389
D [15/Nov/2021:19:57:52 +0100] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:57:52 +0100] [Client 9] con->http=0x5577de4ac330
D [15/Nov/2021:19:57:52 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=389, response=0x5577de426190(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:57:52 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:57:52 +0100] [Client 9] bytes=0, http_state=0, data_remaining=389
D [15/Nov/2021:19:57:52 +0100] [Client 9] Flushing write buffer.
D [15/Nov/2021:19:57:52 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:57:52 +0100] [Client 9] Waiting for request.
D [15/Nov/2021:19:57:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:57:52 +0100] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [15/Nov/2021:19:57:52 +0100] [Client 9] Closing connection.
D [15/Nov/2021:19:57:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [15/Nov/2021:19:57:53 +0100] Expiring subscriptions...
I [15/Nov/2021:19:58:18 +0100] Saving subscriptions.conf...
D [15/Nov/2021:19:58:18 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [15/Nov/2021:19:58:18 +0100] Expiring subscriptions...
D [15/Nov/2021:19:58:48 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [15/Nov/2021:19:58:48 +0100] [Client 10] Server address is "/run/cups/cups.sock".
D [15/Nov/2021:19:58:48 +0100] [Client 10] Accepted from localhost (Domain)
D [15/Nov/2021:19:58:48 +0100] [Client 10] Waiting for request.
I [15/Nov/2021:19:58:48 +0100] Expiring subscriptions...
D [15/Nov/2021:19:58:48 +0100] Report: clients=4
D [15/Nov/2021:19:58:48 +0100] Report: jobs=10
D [15/Nov/2021:19:58:48 +0100] Report: jobs-active=0
D [15/Nov/2021:19:58:48 +0100] Report: printers=2
D [15/Nov/2021:19:58:48 +0100] Report: stringpool-string-count=978
D [15/Nov/2021:19:58:48 +0100] Report: stringpool-alloc-bytes=9424
D [15/Nov/2021:19:58:48 +0100] Report: stringpool-total-bytes=18888
I [15/Nov/2021:19:58:49 +0100] Expiring subscriptions...
D [15/Nov/2021:19:58:50 +0100] [Client 10] POST / HTTP/1.1
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Read: status=200, state=6
D [15/Nov/2021:19:58:50 +0100] [Client 10] No authentication data provided.
D [15/Nov/2021:19:58:50 +0100] [Client 10] 2.0 Create-Printer-Subscriptions 1
D [15/Nov/2021:19:58:50 +0100] Create-Printer-Subscriptions /
D [15/Nov/2021:19:58:50 +0100] create_subscriptions(con=0x5577de496730(10), uri="/")
D [15/Nov/2021:19:58:50 +0100] pullmethod="ippget"
D [15/Nov/2021:19:58:50 +0100] notify-lease-duration=86400
D [15/Nov/2021:19:58:50 +0100] notify-time-interval=60
D [15/Nov/2021:19:58:50 +0100] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [15/Nov/2021:19:58:50 +0100] Added subscription #397 for server.
D [15/Nov/2021:19:58:50 +0100] cupsdMarkDirty(----S)
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [15/Nov/2021:19:58:50 +0100] [Client 10] Content-Length: 107
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [15/Nov/2021:19:58:50 +0100] Expiring subscriptions...
D [15/Nov/2021:19:58:50 +0100] [Client 10] con->http=0x5577de4ac330
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5577de473710(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:58:50 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] bytes=0, http_state=0, data_remaining=107
D [15/Nov/2021:19:58:50 +0100] [Client 10] Flushing write buffer.
D [15/Nov/2021:19:58:50 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:58:50 +0100] [Client 10] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 11] Server address is "/run/cups/cups.sock".
D [15/Nov/2021:19:58:50 +0100] [Client 11] Accepted from localhost (Domain)
D [15/Nov/2021:19:58:50 +0100] [Client 11] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] [Client 11] POST / HTTP/1.1
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 11] Read: status=200, state=6
D [15/Nov/2021:19:58:50 +0100] [Client 11] No authentication data provided.
D [15/Nov/2021:19:58:50 +0100] [Client 11] 2.0 CUPS-Get-Printers 2
D [15/Nov/2021:19:58:50 +0100] CUPS-Get-Printers
D [15/Nov/2021:19:58:50 +0100] [Client 11] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [15/Nov/2021:19:58:50 +0100] [Client 11] Content-Length: 2358
D [15/Nov/2021:19:58:50 +0100] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:58:50 +0100] [Client 11] con->http=0x5577de4b0b90
D [15/Nov/2021:19:58:50 +0100] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2358, response=0x5577de47f8d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:58:50 +0100] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:58:50 +0100] [Client 11] bytes=0, http_state=0, data_remaining=2358
D [15/Nov/2021:19:58:50 +0100] [Client 11] Flushing write buffer.
D [15/Nov/2021:19:58:50 +0100] [Client 11] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:58:50 +0100] [Client 11] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] POST /printers/FS-1061DN HTTP/1.1
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Read: status=200, state=6
D [15/Nov/2021:19:58:50 +0100] [Client 10] No authentication data provided.
D [15/Nov/2021:19:58:50 +0100] [Client 10] 2.0 Get-Printer-Attributes 3
D [15/Nov/2021:19:58:50 +0100] Get-Printer-Attributes ipp://localhost/printers/FS-1061DN
D [15/Nov/2021:19:58:50 +0100] [Client 10] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/FS-1061DN) from localhost.
D [15/Nov/2021:19:58:50 +0100] [Client 10] Content-Length: 138
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] con->http=0x5577de4ac330
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x5577de484d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:58:50 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] bytes=0, http_state=0, data_remaining=138
D [15/Nov/2021:19:58:50 +0100] [Client 10] Flushing write buffer.
D [15/Nov/2021:19:58:50 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:58:50 +0100] [Client 10] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] POST /printers/Kyocera HTTP/1.1
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Read: status=200, state=6
D [15/Nov/2021:19:58:50 +0100] [Client 10] No authentication data provided.
D [15/Nov/2021:19:58:50 +0100] [Client 10] 2.0 Get-Printer-Attributes 4
D [15/Nov/2021:19:58:50 +0100] Get-Printer-Attributes ipp://localhost/printers/Kyocera
D [15/Nov/2021:19:58:50 +0100] [Client 10] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Kyocera) from localhost.
D [15/Nov/2021:19:58:50 +0100] [Client 10] Content-Length: 138
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] con->http=0x5577de4ac330
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x5577de47d030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:58:50 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] bytes=0, http_state=0, data_remaining=138
D [15/Nov/2021:19:58:50 +0100] [Client 10] Flushing write buffer.
D [15/Nov/2021:19:58:50 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:58:50 +0100] [Client 10] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] POST / HTTP/1.1
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Read: status=200, state=6
D [15/Nov/2021:19:58:50 +0100] [Client 10] No authentication data provided.
D [15/Nov/2021:19:58:50 +0100] [Client 10] 2.0 CUPS-Get-Default 5
D [15/Nov/2021:19:58:50 +0100] CUPS-Get-Default
D [15/Nov/2021:19:58:50 +0100] CUPS-Get-Default client-error-not-found: Kein voreingestellter Drucker.
D [15/Nov/2021:19:58:50 +0100] [Client 10] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [15/Nov/2021:19:58:50 +0100] [Client 10] Content-Length: 124
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] con->http=0x5577de4ac330
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x5577de426190(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:58:50 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] bytes=0, http_state=0, data_remaining=124
D [15/Nov/2021:19:58:50 +0100] [Client 10] Flushing write buffer.
D [15/Nov/2021:19:58:50 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:58:50 +0100] [Client 10] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] POST / HTTP/1.1
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Read: status=200, state=6
D [15/Nov/2021:19:58:50 +0100] [Client 10] No authentication data provided.
D [15/Nov/2021:19:58:50 +0100] [Client 10] 2.0 Create-Printer-Subscriptions 6
D [15/Nov/2021:19:58:50 +0100] Create-Printer-Subscriptions /
D [15/Nov/2021:19:58:50 +0100] create_subscriptions(con=0x5577de496730(10), uri="/")
D [15/Nov/2021:19:58:50 +0100] recipient="dbus://"
D [15/Nov/2021:19:58:50 +0100] notify-lease-duration=86400
D [15/Nov/2021:19:58:50 +0100] notify-time-interval=0
D [15/Nov/2021:19:58:50 +0100] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [15/Nov/2021:19:58:50 +0100] Added subscription #398 for server.
D [15/Nov/2021:19:58:50 +0100] cupsdMarkDirty(----S)
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [15/Nov/2021:19:58:50 +0100] [Client 10] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [15/Nov/2021:19:58:50 +0100] [Client 10] Content-Length: 107
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] con->http=0x5577de4ac330
D [15/Nov/2021:19:58:50 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5577de473710(IPP_STATE_DATA), pipe_pid=0, file=-1
D [15/Nov/2021:19:58:50 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [15/Nov/2021:19:58:50 +0100] [Client 10] bytes=0, http_state=0, data_remaining=107
D [15/Nov/2021:19:58:50 +0100] [Client 10] Flushing write buffer.
D [15/Nov/2021:19:58:50 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [15/Nov/2021:19:58:50 +0100] [Client 10] Waiting for request.
D [15/Nov/2021:19:58:50 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [15/Nov/2021:19:58:51 +0100] Expiring subscriptions...
I [15/Nov/2021:19:59:21 +0100] Saving subscriptions.conf...
D [15/Nov/2021:19:59:21 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [15/Nov/2021:19:59:21 +0100] Expiring subscriptions...
D [15/Nov/2021:20:03:42 +0100] [Client 11] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [15/Nov/2021:20:03:42 +0100] [Client 11] Closing connection.
D [15/Nov/2021:20:03:42 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [15/Nov/2021:20:03:42 +0100] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [15/Nov/2021:20:03:42 +0100] [Client 10] Closing connection.
D [15/Nov/2021:20:03:42 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [15/Nov/2021:20:03:42 +0100] Expiring subscriptions...
D [15/Nov/2021:20:03:42 +0100] cupsdAddCert: Adding certificate for PID 0
D [15/Nov/2021:20:03:42 +0100] Report: clients=3
D [15/Nov/2021:20:03:42 +0100] Report: jobs=10
D [15/Nov/2021:20:03:42 +0100] Report: jobs-active=0
D [15/Nov/2021:20:03:42 +0100] Report: printers=2
D [15/Nov/2021:20:03:42 +0100] Report: stringpool-string-count=978
D [15/Nov/2021:20:03:42 +0100] Report: stringpool-alloc-bytes=9424
D [15/Nov/2021:20:03:42 +0100] Report: stringpool-total-bytes=18888
I [15/Nov/2021:20:03:43 +0100] Expiring subscriptions...

cups-browsed -v habe ich auch noch als sudo versucht, allerdings mit identischem Ergebnis.

Irgendwie sind die Ausgaben nicht genau zuzuordnen für mich.Alleine diese Ausgabe

Mon Nov 15 19:58:50 2021 Could not determine system default printer!

sowie der Versuch einen Hpfax anzusprechen ...... hmmmm.

Also mal alles Löschen was den Kyocera betrifft (Druckerverwaltung),sowie

sudo apt purge hplip cups-browsed

danach Neustart und den Kyocera neu Einrichten. Das wäre jetzt mein Weg.

Das was ich interpretiere und umgesetzt habe würde ich RESET nennen. Ich haben zunächst sudo apt purge hplip cups-browsed durchlaufen lassen. Da im Anschluss der Drucker immer noch vorhanden war habe ich ihn manuell gelöscht, kein Drucker mehr im System.

Neustart sudo cupsctl --debug-logging Neustart cups-browsed -v

thomas@Romeo-Feliz:~$ sudo cups-browsed -v
[sudo] Passwort für thomas: 
sudo: cups-browsed: Befehl nicht gefunden

Und, wenn auch nicht schön, noch einmal ein screenshot als Anhang

Ich bin Deine bisheringen Ideen noch einmal durchgegangen und jetzt zu diesem Ergebnis gekommen, was für mich darstellt, dass der Drucker nun garnicht mehr im System auftaucht. Korrekt?

thomas@Romeo-Feliz:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 009: ID 8087:0a2a Intel Corp. 
Bus 001 Device 007: ID 0bdc:4691 Y Media Corp. 
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 012: ID 0461:4e84 Primax Electronics, Ltd USB2.0 HUB
Bus 001 Device 004: ID 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Ich würde ihn jetzt noch einmal, wie von Dir avisiert vollständig entfernen, Neustart und dann mit Kyocera_FS-1060DNGDI.ppd neu installieren.

Das er bei

lsusb

nicht auftaucht ist nicht Ok. Neustart,Drucker ab und anklemmen und wieder abfragen.

Gefunden habe ich das (gekürzt)

*FileVersion: "1.1203"
*FormatVersion: "4.3"
*LanguageEncoding: ISOLatin1
*LanguageVersion: German
*Product: "(FS-1061DN)"
*PSVersion: "(3011.103) 1"
*Manufacturer: "Kyocera"
*ModelName: "Kyocera FS-1061DN KPSL"
*ShortNickName: "Kyocera FS-1061DN (KPSL)"
*NickName: "Kyocera FS-1061DN (KPSL)"
*PCFileName: "KC1061EG.PPD"

*1284DeviceID: "MDL:FS-1061DN;MFG:Kyocera"

*cupsVersion: 1.2
*cupsManualCopies: False
*cupsModelNumber: 0
*cupsSNMPSupplies: False

*cupsFilter: "application/vnd.cups-raster 0 /usr/lib/cups/filter/rastertokpsl"

Hast du das? Zeige mal

locate rastertokpsl

thomas@Romeo-Feliz:~$ locate rastertokpsl
/home/thomas/German/rastertokpsl
/home/thomas/German/German/rastertokpsl
/home/thomas/Schreibtisch/German/rastertokpsl
/usr/lib/cups/filter/rastertokpsl

ist dort, wo sie sein sollte, gell.

und nach Stöpseln und Neustart ist er auch wieder da.

thomas@Romeo-Feliz:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 009: ID 8087:0a2a Intel Corp. 
Bus 001 Device 007: ID 0bdc:4691 Y Media Corp. 
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 008: ID 0461:4e84 Primax Electronics, Ltd USB2.0 HUB
Bus 001 Device 006: ID 0482:04fc Kyocera Corp. 
Bus 001 Device 004: ID 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

und letztendlich landet der Job 144 (Testpage) anscheinend doch auch dort bei cups, wo er hin soll, oder täusche ich mich?

thomas@Romeo-Feliz:~$ systemctl --no-pager status cups*
● cups.path - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
     Active: active (waiting) since Tue 2021-11-16 13:56:42 CET; 2h 20min ago
   Triggers: ● cups.service

Nov 16 13:56:42 Romeo-Feliz systemd[1]: Started CUPS Scheduler.

● cups.socket - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2021-11-16 13:56:42 CET; 2h 20min ago
   Triggers: ● cups.service
     Listen: /run/cups/cups.sock (Stream)
     CGroup: /system.slice/cups.socket

Nov 16 13:56:42 Romeo-Feliz systemd[1]: Listening on CUPS Scheduler.

● cups.service - CUPS Scheduler
     Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2021-11-16 13:56:42 CET; 2h 20min ago
TriggeredBy: ● cups.socket
             ● cups.path
       Docs: man:cupsd(8)
   Main PID: 6222 (cupsd)
      Tasks: 12 (limit: 8194)
     Memory: 24.7M
     CGroup: /system.slice/cups.service
             ├─6222 /usr/sbin/cupsd -l
             ├─6225 /usr/lib/cups/notifier/dbus dbus://
             ├─6226 /usr/lib/cups/notifier/dbus dbus://
             ├─6343 /usr/lib/cups/notifier/dbus dbus://
             ├─8597 FS-1061DN 144 thomas Test Page 1 job-uuid=urn:uuid:973bbc66…
             ├─8598 usb://Kyocera/FS-1061DN?serial=R6W1713833 144 thomas Test P…
             ├─8602 gs -q -dNOPAUSE -dBATCH -dSAFER -dNOMEDIAATTRS -sstdout=%st…
             ├─8603 FS-1061DN 144 thomas Test Page 1 job-uuid=urn:uuid:973bbc66…
             └─8604 FS-1061DN 144 thomas Test Page 1 job-uuid=urn:uuid:973bbc66…

Nov 16 13:56:42 Romeo-Feliz systemd[1]: Started CUPS Scheduler.

Die Ausgabe ist nicht ganz zu sehen. Zeige mal

lpc status

lpstat -t

thomas@Romeo-Feliz:~$ lpc status
FS-1061DN:
	Drucker ist am Gerät 'usb' Geschwindigkeit -1
	in Warteschlange einreihen erlaubt
	Drucken ist eingeschaltet
	2 Einträge
	Dienst verfügbar

thomas@Romeo-Feliz:~$ lpstat -t
Zeitplandienst läuft
Keine systemvoreingestellten Ziele
Gerät für FS-1061DN: usb://Kyocera/FS-1061DN?serial=R6W1713833
FS-1061DN akzeptiert Anfragen seit Di 16 Nov 2021 17:08:02 CET
Drucker FS-1061DN ist im Leerlauf.  Aktiviert seit Di 16 Nov 2021 17:08:02 CET

Der Job 144 der Testpage hat sich zwischenzeitlich von alleine erledigt, weshalb ich, nach dem Start einer neunen Testpage lpstat -t noch einmal anhänge

thomas@Romeo-Feliz:~$ lpstat -t
Zeitplandienst läuft
Keine systemvoreingestellten Ziele
Gerät für FS-1061DN: usb://Kyocera/FS-1061DN?serial=R6W1713833
FS-1061DN akzeptiert Anfragen seit Di 16 Nov 2021 17:10:11 CET
Drucker FS-1061DN druckt jetzt FS-1061DN-145.  Aktiviert seit Di 16 Nov 2021 17:10:11 CET
	Sende Daten zum Drucker.
FS-1061DN-145           thomas            1024   Di 16 Nov 2021 17:10:11 CET

Hmm,die Luft wird dünner!Zeige mal

/usr/sbin/cupsfilter -p /etc/cups/ppd/FS-1061DN.ppd -m printer/foo -e --list-filters /etc/services

Ich weiß Deinen Einsatz durchaus sehr zu schätzen. 👍

thomas@Romeo-Feliz:~$ sudo /usr/sbin/cupsfilter -p /etc/cups/ppd/FS-1061DN.ppd -m printer/foo -e --list-filters /etc/services
[sudo] Passwort für thomas: 
cupsfilter: Dateirechte "/usr/lib/cups/filter/commandtops" OK (040755/uid=0/gid=0).
texttopdf
pdftopdf
pdftops

Er nutzt den Filter gar nicht

/usr/lib/cups/filter/rastertokpsl

ob es daran liegt?? Zeige mal

ls -la /etc/cups/ppd/*

grep cupsFilter /etc/cups/ppd/FS-1061DN.ppd