staging.inyokaproject.org

Hallo, ich habe keinen Ton mehr. Unter Einstellungen > Klang kann ich als Ausgabegerät nur "Dummy Output" auswählen.

Ich bin darum gemäß dem Wiki-Artikel "Sound Problembehebung" die ersten Schritte durchgegangen. Die Erkennung funktioniert. Die Wiedergabe mit aplay .... spielt Ton ab, ist aber nicht zu hören. Rufe ich den gleichen Befehl mit sudo auf höre ich eine Tonausgabe. Dann habe ich

sudo addgroup $USER audio

eigegeben. Bekomme aber eine Meldung das der User schon Mitglied ist. Die Ausgabe

echo normal:; aplay -l; echo sudo:; sudo aplay -l 

ergibt keine Unterschiede.

Gemäß dem Wiki-Artikel "Audio-Fehler-Beschreibung" hier folgende Ausgaben

lsb_release -d
ergibt:
Description:	Ubuntu 22.10

uname -r
ergibt:
5.19.0-31-generic

cat /proc/asound/cards
ergibt:
 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf7f10000 irq 35
 1 [HDMI           ]: HDA-Intel - HDA ATI HDMI
                      HDA ATI HDMI at 0xf7e60000 irq 36
                      
aplay -l
ergibt:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: Generic Analog [Generic Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 1: Generic Digital [Generic Digital]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 9: HDMI 3 [HDMI 3]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 10: HDMI 4 [HDMI 4]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
  
aplay /usr/share/sounds/alsa/Noise.wav
ergibt:
Wiedergabe: WAVE '/usr/share/sounds/alsa/Nouse.wav' : Signed 16 bit Littele Endian, Rate: 48000 Hz, mono

lspci -nnk | grep -iA audio
ergibt:
00:1b.0 Audio device [0403]: Intel Corporation 9 Series Chipset Family HD Audio Controller [8086:8ca0]
	Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family HD Audio Controller [1043:8616]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
--
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X] [1002:aae0]
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X] [1002:aae0]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
ps -C esd
ergibt:
    PID TTY          TIME CMD

ps -C arts
ergibt:
    PID TTY          TIME CMD
    
ps -C pulseaudio
ergibt:
    PID TTY          TIME CMD
    
grep "^audio" /etc/group | grep "$USER" | wc -l
ergibt:
1

dpkg -l | tr -s " " | grep " alsa-"
ergibt:
ii alsa-base 1.0.25+dfsg-0ubuntu7 all ALSA driver configuration files
ii alsa-topology-conf 1.2.5.1-2 all ALSA topology configuration files
ii alsa-ucm-conf 1.2.6.3-1ubuntu4.1 all ALSA Use Case Manager configuration files
ii alsa-utils 1.2.6-1ubuntu1 amd64 Utilities for configuring and using ALSA

lsmod | grep "snd"
ergibt:
snd_hda_codec_realtek   163840  0
snd_hda_codec_generic   102400  2 snd_hda_codec_realtek
ledtrig_audio          16384  1 snd_hda_codec_generic
snd_hda_codec_hdmi     81920  1
snd_hda_intel          53248  0
snd_intel_dspcfg       36864  1 snd_hda_intel
snd_intel_sdw_acpi     20480  1 snd_intel_dspcfg
snd_hda_codec         172032  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core          118784  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              20480  1 snd_hda_codec
snd_pcm               159744  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_seq_midi           20480  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            45056  1 snd_seq_midi
snd_seq                77824  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer              40960  2 snd_seq,snd_pcm
snd                   114688  11 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
soundcore              16384  1 snd

head -n 3 /proc/asound/card0/codec#0
ergibt:
Codec: Realtek Generic
Address: 0
AFG Function Id: 0x1 (unsol 1)

head -n 3 /proc/asound/card0/codec97#0/ac97#0-0
ergibt:
kann nicht zum Lesen geöffnet werden: Datei oder Verzeinis nicht gefunden

cat ~/.asoundrc
ergibt:
Datei oder Verzeichnis nicht gefunden

cat /etc/asound.conf 
ergibt:
Datei oder Verzeichnis nicht gefunden

Zum Schluß der Ausgaben werden einige Dateien bzw. Verzeichnisse nicht gefunden. Hier scheint irgend eine Installation wohl schief gelaufen sein.

Könnt ihr mir helfen?

mfg

Klaus

Hallo,

durch ausprobieren bin ich etwas weitergekommen. Wenn ich den Befehl

systemctl --user restart pulseaudio.service 

funktioniert scheinbar alles. Scheinbar muß Pulseaudio gestartet sein und ist es aber nicht.

Bei einem Neustart muß pulseaudio.service wieder neu starten, damit es funktioniert.

Frage:

Wie kann ich dem System mitteilen das es bei jedem Start auch pulseaudio.service startet.

mfg

Klaus

zeige mal im Fehlerfall

pactl info
systemctl --user status pulseaudio.{socket,service}
systemctl --user status pipewire{,-pulse}.{socket,service}  

Hallo Marant, im Fehlerfall gibt es folgende Ausgabe:

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 52
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: PulseAudio (on PipeWire 0.3.58)
Version des Servers: 15.0.0
Standard-Abtastwert-Angabe: float32le 2ch 48000Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: @DEFAULT_SINK@
Standard-Quelle: @DEFAULT_SOURCE@
Cookie: 0fc4:3019

Ohne Fehler sieht es dagegen so aus:

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 302
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: pulseaudio
Version des Servers: 16.1
Standard-Abtastwert-Angabe: s16le 2ch 44100Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: alsa_output.pci-0000_00_1b.0.analog-stereo
Standard-Quelle: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Cookie: a30b:d6a6

Hilft die dies weiter?

mfg

Klaus

Naja, die 2 anderen Ausgaben wären auch schön gewesen. ☺

Wie Du sehen kannst ändert sich der Server.(Name des Servers: ) Kommt so zur Blokade.

Folgendes ausführen um das zu unterbinden: (Suche Dir selbst aus welchen Du nutzen willst.) Zeile für Zeile in der Reihenfolge eingeben.

https://forum.ubuntuusers.de/post/9323045/

Hallo Marant,

ich habe es entsprechend den Zeilen unter "PA" folgend ausprobiert. Keine Veränderung, der Fehler war nach dem nächsten Neustart wieder da. Mir ist allerdings aufgefallen, das wireplumber bei mir nicht installiert war , das modul pulseaudio-module-bluetooth dagegen schon da war.

mfg

Klaus

https://forum.ubuntuusers.de/post/9364494/

gerne hier die Angaben:

im Fehlerfall erhalte ich

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 46
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: PulseAudio (on PipeWire 0.3.58)
Version des Servers: 15.0.0
Standard-Abtastwert-Angabe: float32le 2ch 48000Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: @DEFAULT_SINK@
Standard-Quelle: @DEFAULT_SOURCE@
Cookie: 741b:2ba3
○ pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
     Active: inactive (dead)
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)

○ pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
     Active: inactive (dead)
TriggeredBy: ○ pulseaudio.socket
● pipewire.socket - PipeWire Multimedia System Socket
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:43:55 CET; 2min 40s ago
      Until: Sun 2023-02-26 18:43:55 CET; 2min 40s ago
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire.socket

Feb 26 18:43:55 bild-pc systemd[4255]: Listening on PipeWire Multimedia System Socket.

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:43:55 CET; 2min 40s ago
TriggeredBy: ● pipewire.socket
   Main PID: 4262 (pipewire)
      Tasks: 2 (limit: 19010)
     Memory: 2.5M
        CPU: 29ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─4262 /usr/bin/pipewire

Feb 26 18:43:55 bild-pc systemd[4255]: Started PipeWire Multimedia Service.
Feb 26 18:43:55 bild-pc pipewire[4262]: mod.rt: Can't find xdg-portal: (null)
Feb 26 18:43:55 bild-pc pipewire[4262]: mod.rt: found session bus but no portal

● pipewire-pulse.socket - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:43:55 CET; 2min 40s ago
      Until: Sun 2023-02-26 18:43:55 CET; 2min 40s ago
   Triggers: ● pipewire-pulse.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire-pulse.socket

Feb 26 18:43:55 bild-pc systemd[4255]: Listening on PipeWire PulseAudio.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:43:55 CET; 2min 40s ago
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 4264 (pipewire-pulse)
      Tasks: 2 (limit: 19010)
     Memory: 2.1M
        CPU: 26ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─4264 /usr/bin/pipewire-pulse

Feb 26 18:43:55 bild-pc systemd[4255]: Started PipeWire PulseAudio.
Feb 26 18:43:55 bild-pc pipewire-pulse[4264]: mod.rt: Can't find xdg-portal: (null)
Feb 26 18:43:55 bild-pc pipewire-pulse[4264]: mod.rt: found session bus but no portal
Feb 26 18:43:55 bild-pc pipewire-pulse[4291]: 536870912

ohne Fehler erhalte ich:

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 9
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: pulseaudio
Version des Servers: 16.1
Standard-Abtastwert-Angabe: s16le 2ch 44100Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: alsa_output.pci-0000_00_1b.0.analog-stereo
Standard-Quelle: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Cookie: bfba:98f9
● pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:27:14 CET; 14min ago
      Until: Sun 2023-02-26 18:27:14 CET; 14min ago
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pulseaudio.socket

Feb 26 18:27:14 bild-pc systemd[2420]: Listening on Sound System.

● pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:27:14 CET; 14min ago
TriggeredBy: ● pulseaudio.socket
   Main PID: 4846 (pulseaudio)
      Tasks: 4 (limit: 19010)
     Memory: 23.7M
        CPU: 217ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pulseaudio.service
             └─4846 /usr/bin/pulseaudio --daemonize=no --log-target=journal

Feb 26 18:27:14 bild-pc systemd[2420]: Starting Sound Service...
Feb 26 18:27:14 bild-pc pulseaudio[4846]: Stale PID file, overwriting.
Feb 26 18:27:14 bild-pc systemd[2420]: Started Sound Service.
Feb 26 18:27:39 bild-pc pulseaudio[4846]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
● pipewire.socket - PipeWire Multimedia System Socket
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:25:30 CET; 16min ago
      Until: Sun 2023-02-26 18:25:30 CET; 16min ago
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire.socket

Feb 26 18:25:30 bild-pc systemd[2420]: Listening on PipeWire Multimedia System Socket.

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 18:25:30 CET; 16min ago
TriggeredBy: ● pipewire.socket
   Main PID: 2427 (pipewire)
      Tasks: 2 (limit: 19010)
     Memory: 3.6M
        CPU: 43ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─2427 /usr/bin/pipewire

Feb 26 18:25:30 bild-pc systemd[2420]: Started PipeWire Multimedia Service.
Feb 26 18:25:30 bild-pc pipewire[2427]: mod.rt: Can't find xdg-portal: (null)
Feb 26 18:25:30 bild-pc pipewire[2427]: mod.rt: found session bus but no portal

○ pipewire-pulse.socket - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 18:27:14 CET; 15min ago
   Duration: 1min 44.083s
   Triggers: ● pipewire-pulse.service
     Listen: /run/user/1000/pulse/native (Stream)

Feb 26 18:25:30 bild-pc systemd[2420]: Listening on PipeWire PulseAudio.
Feb 26 18:27:14 bild-pc systemd[2420]: Closed PipeWire PulseAudio.

○ pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 18:27:14 CET; 15min ago
   Duration: 1min 44.074s
TriggeredBy: ○ pipewire-pulse.socket
    Process: 2429 ExecStart=/usr/bin/pipewire-pulse (code=exited, status=0/SUCCESS)
   Main PID: 2429 (code=exited, status=0/SUCCESS)
        CPU: 47ms

Feb 26 18:25:30 bild-pc systemd[2420]: Started PipeWire PulseAudio.
Feb 26 18:25:30 bild-pc pipewire-pulse[2429]: mod.rt: Can't find xdg-portal: (null)
Feb 26 18:25:30 bild-pc pipewire-pulse[2429]: mod.rt: found session bus but no portal
Feb 26 18:25:30 bild-pc pipewire-pulse[2456]: 536870912
Feb 26 18:27:14 bild-pc systemd[2420]: Stopping PipeWire PulseAudio...
Feb 26 18:27:14 bild-pc systemd[2420]: Stopped PipeWire PulseAudio.

mfg

Klaus

Was ist damit? Ich müsste sonst raten, das ist unsinnig.

systemctl --user status pulseaudio.{socket,service}
systemctl --user status pipewire{,-pulse}.{socket,service}  

sorry. gerade gesehen

Führe nochmal nur die PA Aktivierung(Zeile für Zeile eingeben) durch. Neustart ist zwar nicht nötig, starte trotzdem neu.

Dann die 3 Ausgaben nochmal posten. Von Pipewire darf danach nichts mehr aktiv sein.

hier das Ergebis mit Fehler (also jetziger Zustand):

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 52
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: PulseAudio (on PipeWire 0.3.58)
Version des Servers: 15.0.0
Standard-Abtastwert-Angabe: float32le 2ch 48000Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: @DEFAULT_SINK@
Standard-Quelle: @DEFAULT_SOURCE@
Cookie: f1c7:4a01
○ pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
     Active: inactive (dead)
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)

○ pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
     Active: inactive (dead)
TriggeredBy: ○ pulseaudio.socket
● pipewire.socket - PipeWire Multimedia System Socket
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 19:16:17 CET; 1min 35s ago
      Until: Sun 2023-02-26 19:16:17 CET; 1min 35s ago
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire.socket

Feb 26 19:16:17 bild-pc systemd[2403]: Listening on PipeWire Multimedia System Socket.

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 19:16:17 CET; 1min 35s ago
TriggeredBy: ● pipewire.socket
   Main PID: 2410 (pipewire)
      Tasks: 2 (limit: 19010)
     Memory: 3.0M
        CPU: 35ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─2410 /usr/bin/pipewire

Feb 26 19:16:17 bild-pc systemd[2403]: Started PipeWire Multimedia Service.
Feb 26 19:16:17 bild-pc pipewire[2410]: mod.rt: Can't find xdg-portal: (null)
Feb 26 19:16:17 bild-pc pipewire[2410]: mod.rt: found session bus but no portal

● pipewire-pulse.socket - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 19:16:17 CET; 1min 35s ago
      Until: Sun 2023-02-26 19:16:17 CET; 1min 35s ago
   Triggers: ● pipewire-pulse.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire-pulse.socket

Feb 26 19:16:17 bild-pc systemd[2403]: Listening on PipeWire PulseAudio.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 19:16:17 CET; 1min 35s ago
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 2412 (pipewire-pulse)
      Tasks: 2 (limit: 19010)
     Memory: 2.7M
        CPU: 31ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─2412 /usr/bin/pipewire-pulse

Feb 26 19:16:17 bild-pc systemd[2403]: Started PipeWire PulseAudio.
Feb 26 19:16:17 bild-pc pipewire-pulse[2412]: mod.rt: Can't find xdg-portal: (null)
Feb 26 19:16:17 bild-pc pipewire-pulse[2412]: mod.rt: found session bus but no portal
Feb 26 19:16:17 bild-pc pipewire-pulse[2439]: 536870912

und nun der Zustand vor dem Neustart (wo der Fehler weg war, also fehlerfrei):

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 6
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: pulseaudio
Version des Servers: 16.1
Standard-Abtastwert-Angabe: s16le 2ch 44100Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: alsa_output.pci-0000_00_1b.0.analog-stereo
Standard-Quelle: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Cookie: 99e9:5834
● pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 19:10:57 CET; 4min 4s ago
      Until: Sun 2023-02-26 19:10:57 CET; 4min 4s ago
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pulseaudio.socket

Feb 26 19:10:57 bild-pc systemd[4255]: Listening on Sound System.

● pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 19:10:58 CET; 4min 3s ago
TriggeredBy: ● pulseaudio.socket
   Main PID: 7411 (pulseaudio)
      Tasks: 4 (limit: 19010)
     Memory: 23.5M
        CPU: 235ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pulseaudio.service
             └─7411 /usr/bin/pulseaudio --daemonize=no --log-target=journal

Feb 26 19:10:57 bild-pc systemd[4255]: Starting Sound Service...
Feb 26 19:10:57 bild-pc pulseaudio[7411]: Stale PID file, overwriting.
Feb 26 19:10:58 bild-pc systemd[4255]: Started Sound Service.
Feb 26 19:11:23 bild-pc pulseaudio[7411]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
○ pipewire.socket - PipeWire Multimedia System Socket
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:06:14 CET; 9min ago
   Duration: 22min 18.735s
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)

Feb 26 18:43:55 bild-pc systemd[4255]: Listening on PipeWire Multimedia System Socket.
Feb 26 19:06:14 bild-pc systemd[4255]: Closed PipeWire Multimedia System Socket.

○ pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:06:14 CET; 9min ago
   Duration: 22min 18.728s
TriggeredBy: ○ pipewire.socket
   Main PID: 4262 (code=exited, status=0/SUCCESS)
        CPU: 41ms

Feb 26 18:43:55 bild-pc systemd[4255]: Started PipeWire Multimedia Service.
Feb 26 18:43:55 bild-pc pipewire[4262]: mod.rt: Can't find xdg-portal: (null)
Feb 26 18:43:55 bild-pc pipewire[4262]: mod.rt: found session bus but no portal
Feb 26 19:06:14 bild-pc systemd[4255]: Stopping PipeWire Multimedia Service...
Feb 26 19:06:14 bild-pc systemd[4255]: Stopped PipeWire Multimedia Service.

○ pipewire-pulse.socket - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:06:14 CET; 9min ago
   Duration: 22min 18.712s
   Triggers: ● pipewire-pulse.service
     Listen: /run/user/1000/pulse/native (Stream)

Feb 26 18:43:55 bild-pc systemd[4255]: Listening on PipeWire PulseAudio.
Feb 26 19:06:14 bild-pc systemd[4255]: Closed PipeWire PulseAudio.

○ pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:06:14 CET; 9min ago
   Duration: 22min 18.704s
TriggeredBy: ○ pipewire-pulse.socket
   Main PID: 4264 (code=exited, status=0/SUCCESS)
        CPU: 43ms

Feb 26 18:43:55 bild-pc systemd[4255]: Started PipeWire PulseAudio.
Feb 26 18:43:55 bild-pc pipewire-pulse[4264]: mod.rt: Can't find xdg-portal: (null)
Feb 26 18:43:55 bild-pc pipewire-pulse[4264]: mod.rt: found session bus but no portal
Feb 26 18:43:55 bild-pc pipewire-pulse[4291]: 536870912
Feb 26 19:06:14 bild-pc systemd[4255]: Stopping PipeWire PulseAudio...
Feb 26 19:06:14 bild-pc systemd[4255]: Stopped PipeWire PulseAudio.

ich meine wie vorher. Der Neustart bringt wieder den Fehler

mfg

Klaus

Grrr..

na gut, mach das mal

systemctl --user --now disable pipewire{,-pulse}.{socket,service}  
systemctl --user mask pipewire{,-pulse}.{socket,service}
systemctl --user --now enable pulseaudio.service pulseaudio.socket

Neustart, Dann wieder die 3 Ausgaben.

bei der Ausführung des 2. Befehl kommt folgende Meldung:

Invalid unit name "pipewire{,-pulse].socket" escaped as "pipewire\x7b\x2c-pulse\x5d.socket" (maybe you should use systemd-escape?)
Invalid unit name "pipewire{,-pulse].service" escaped as "pipewire\x7b\x2c-pulse\x5d.service" (maybe you should use systemd-escape?)
Unit pipewire\x7b\x2c-pulse\x5d.socket does not exist, proceeding anyway.
Unit pipewire\x7b\x2c-pulse\x5d.service does not exist, proceeding anyway.
Created symlink /home/klaus/.config/systemd/user/pipewire\x7b\x2c-pulse\x5d.socket  -> /dev/null.
Created symlink /home/klaus/.config/systemd/user/pipewire\x7b\x2c-pulse\x5d.service  -> /dev/null.

dann habe ich den 3. Befehl ausgeführt

danach funktioniert wieder alles, nun die Ausgabe (ohne Fehler):

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 5
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: pulseaudio
Version des Servers: 16.1
Standard-Abtastwert-Angabe: s16le 2ch 44100Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: alsa_output.pci-0000_00_1b.0.analog-stereo
Standard-Quelle: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Cookie: ed16:baf6
● pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 20:03:04 CET; 1min 38s ago
      Until: Sun 2023-02-26 20:03:04 CET; 1min 38s ago
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pulseaudio.socket

Feb 26 20:03:04 bild-pc systemd[2403]: Listening on Sound System.

● pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 20:03:05 CET; 1min 37s ago
TriggeredBy: ● pulseaudio.socket
   Main PID: 6584 (pulseaudio)
      Tasks: 4 (limit: 19010)
     Memory: 23.5M
        CPU: 166ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pulseaudio.service
             └─6584 /usr/bin/pulseaudio --daemonize=no --log-target=journal

Feb 26 20:03:04 bild-pc systemd[2403]: Starting Sound Service...
Feb 26 20:03:04 bild-pc pulseaudio[6584]: Stale PID file, overwriting.
Feb 26 20:03:05 bild-pc systemd[2403]: Started Sound Service.
Feb 26 20:03:30 bild-pc pulseaudio[6584]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
○ pipewire.socket - PipeWire Multimedia System Socket
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:48:28 CET; 16min ago
   Duration: 32min 10.493s
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)

Feb 26 19:16:17 bild-pc systemd[2403]: Listening on PipeWire Multimedia System Socket.
Feb 26 19:48:28 bild-pc systemd[2403]: Closed PipeWire Multimedia System Socket.

○ pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:48:28 CET; 16min ago
   Duration: 32min 10.486s
TriggeredBy: ○ pipewire.socket
   Main PID: 2410 (code=exited, status=0/SUCCESS)
        CPU: 40ms

Feb 26 19:16:17 bild-pc systemd[2403]: Started PipeWire Multimedia Service.
Feb 26 19:16:17 bild-pc pipewire[2410]: mod.rt: Can't find xdg-portal: (null)
Feb 26 19:16:17 bild-pc pipewire[2410]: mod.rt: found session bus but no portal
Feb 26 19:48:28 bild-pc systemd[2403]: Stopping PipeWire Multimedia Service...
Feb 26 19:48:28 bild-pc systemd[2403]: Stopped PipeWire Multimedia Service.

○ pipewire-pulse.socket - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:48:28 CET; 16min ago
   Duration: 32min 10.467s
   Triggers: ● pipewire-pulse.service
     Listen: /run/user/1000/pulse/native (Stream)

Feb 26 19:16:17 bild-pc systemd[2403]: Listening on PipeWire PulseAudio.
Feb 26 19:48:28 bild-pc systemd[2403]: Closed PipeWire PulseAudio.

○ pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: inactive (dead) since Sun 2023-02-26 19:48:28 CET; 16min ago
   Duration: 32min 10.458s
TriggeredBy: ○ pipewire-pulse.socket
   Main PID: 2412 (code=exited, status=0/SUCCESS)
        CPU: 33ms

Feb 26 19:16:17 bild-pc systemd[2403]: Started PipeWire PulseAudio.
Feb 26 19:16:17 bild-pc pipewire-pulse[2412]: mod.rt: Can't find xdg-portal: (null)
Feb 26 19:16:17 bild-pc pipewire-pulse[2412]: mod.rt: found session bus but no portal
Feb 26 19:16:17 bild-pc pipewire-pulse[2439]: 536870912
Feb 26 19:48:28 bild-pc systemd[2403]: Stopping PipeWire PulseAudio...
Feb 26 19:48:28 bild-pc systemd[2403]: Stopped PipeWire PulseAudio.

Nun führe ich den Neustart aus und melde mich dann wieder.

der Fehler bleibt.

hier die Ausgabe mit dem Fehler:

Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 35
Server-Protokollversion: 35
ist lokal: ja
Client-Index: 51
Tile-Größe: 65472
Name des Benutzers: klaus
Rechnername: bild-pc
Name des Servers: PulseAudio (on PipeWire 0.3.58)
Version des Servers: 15.0.0
Standard-Abtastwert-Angabe: float32le 2ch 48000Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: @DEFAULT_SINK@
Standard-Quelle: @DEFAULT_SOURCE@
Cookie: 9bf2:a324
○ pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
     Active: inactive (dead)
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)

○ pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
     Active: inactive (dead)
TriggeredBy: ○ pulseaudio.socket
● pipewire.socket - PipeWire Multimedia System Socket
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 20:10:04 CET; 1min 43s ago
      Until: Sun 2023-02-26 20:10:04 CET; 1min 43s ago
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire.socket

Feb 26 20:10:04 bild-pc systemd[2407]: Listening on PipeWire Multimedia System Socket.

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 20:10:04 CET; 1min 43s ago
TriggeredBy: ● pipewire.socket
   Main PID: 2414 (pipewire)
      Tasks: 2 (limit: 19010)
     Memory: 3.0M
        CPU: 33ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─2414 /usr/bin/pipewire

Feb 26 20:10:04 bild-pc systemd[2407]: Started PipeWire Multimedia Service.
Feb 26 20:10:04 bild-pc pipewire[2414]: mod.rt: Can't find xdg-portal: (null)
Feb 26 20:10:04 bild-pc pipewire[2414]: mod.rt: found session bus but no portal

● pipewire-pulse.socket - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 20:10:04 CET; 1min 43s ago
      Until: Sun 2023-02-26 20:10:04 CET; 1min 43s ago
   Triggers: ● pipewire-pulse.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/pipewire-pulse.socket

Feb 26 20:10:04 bild-pc systemd[2407]: Listening on PipeWire PulseAudio.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: active (running) since Sun 2023-02-26 20:10:04 CET; 1min 43s ago
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 2416 (pipewire-pulse)
      Tasks: 2 (limit: 19010)
     Memory: 2.7M
        CPU: 30ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─2416 /usr/bin/pipewire-pulse

Feb 26 20:10:04 bild-pc systemd[2407]: Started PipeWire PulseAudio.
Feb 26 20:10:04 bild-pc pipewire-pulse[2416]: mod.rt: Can't find xdg-portal: (null)
Feb 26 20:10:04 bild-pc pipewire-pulse[2416]: mod.rt: found session bus but no portal
Feb 26 20:10:04 bild-pc pipewire-pulse[2443]: 536870912

Lustig! Oder auch nicht.

Also, wir könnten komplett auf

• Pipewire umstellen versuchen, oder Du lässt per

• Autostart ein kleines Script ausführen

welches die Pipewire Abschalten Sachen automatisch macht.(schönes Deutsch) Das Script ist kein Problem, keine Angst ☺, wäre quasi die Hammermethode. Eine Erklärung habe ich jedensfalls nicht für das bisherige Verhalten.

Was Du wählen?