Guten Abend, mein Brother DCP-195C druckt und scannt nicht. Ich kann ihn nur als Kopierer benutzen.
Bei dem Versuch eine PDF auszudrucken, kommt lediglich die Bildschirmausgabe „Druckvorgang läuft“ und „Drucken wurde abgeschlossen“. Unter Einstellung wird er erkannt und die "dcp195clpr" ist auch installiert.
Wie bekomme ich ihn zum funktionieren?
export SANE_DEBUG_DLL=255 && scanimage -L
[22:29:06.194429] [sanei_debug] Setting debug level of dll to 255. [22:29:06.194555] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29 [22:29:06.194602] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [22:29:06.194664] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [22:29:06.194704] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [22:29:06.194738] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [22:29:06.194796] [dll] sane_init/read_config: reading dll.d/hplip [22:29:06.194852] [dll] add_backend: adding backend `hpaio' [22:29:06.194907] [dll] sane_init/read_dlld: done. [22:29:06.194952] [dll] sane_init/read_config: reading dll.conf [22:29:06.194990] [dll] add_backend: adding backend `net' [22:29:06.195015] [dll] add_backend: adding backend `abaton' [22:29:06.195036] [dll] add_backend: adding backend `agfafocus' [22:29:06.195065] [dll] add_backend: adding backend `apple' [22:29:06.195102] [dll] add_backend: adding backend `artec' [22:29:06.195134] [dll] add_backend: adding backend `artec_eplus48u' [22:29:06.195172] [dll] add_backend: adding backend `as6e' [22:29:06.195196] [dll] add_backend: adding backend `avision' [22:29:06.195222] [dll] add_backend: adding backend `bh' [22:29:06.195246] [dll] add_backend: adding backend `canon' [22:29:06.195283] [dll] add_backend: adding backend `canon630u' [22:29:06.195318] [dll] add_backend: adding backend `canon_dr' [22:29:06.195347] [dll] add_backend: adding backend `cardscan' [22:29:06.195376] [dll] add_backend: adding backend `coolscan' [22:29:06.195408] [dll] add_backend: adding backend `coolscan3' [22:29:06.195445] [dll] add_backend: adding backend `dell1600n_net' [22:29:06.195476] [dll] add_backend: adding backend `dmc' [22:29:06.195510] [dll] add_backend: adding backend `epjitsu' [22:29:06.195539] [dll] add_backend: adding backend `epson2' [22:29:06.195569] [dll] add_backend: adding backend `epsonds' [22:29:06.195599] [dll] add_backend: adding backend `escl' [22:29:06.195627] [dll] add_backend: adding backend `fujitsu' [22:29:06.195659] [dll] add_backend: adding backend `genesys' [22:29:06.195688] [dll] add_backend: adding backend `gt68xx' [22:29:06.195721] [dll] add_backend: adding backend `hp' [22:29:06.195750] [dll] add_backend: adding backend `hp3500' [22:29:06.195779] [dll] add_backend: adding backend `hp3900' [22:29:06.195808] [dll] add_backend: adding backend `hp4200' [22:29:06.195837] [dll] add_backend: adding backend `hp5400' [22:29:06.195867] [dll] add_backend: adding backend `hp5590' [22:29:06.195896] [dll] add_backend: adding backend `hpljm1005' [22:29:06.195925] [dll] add_backend: adding backend `hpsj5s' [22:29:06.195954] [dll] add_backend: adding backend `hs2p' [22:29:06.195983] [dll] add_backend: adding backend `ibm' [22:29:06.196021] [dll] add_backend: adding backend `kodak' [22:29:06.196061] [dll] add_backend: adding backend `kodakaio' [22:29:06.196099] [dll] add_backend: adding backend `kvs1025' [22:29:06.196136] [dll] add_backend: adding backend `kvs20xx' [22:29:06.196174] [dll] add_backend: adding backend `kvs40xx' [22:29:06.196210] [dll] add_backend: adding backend `leo' [22:29:06.196243] [dll] add_backend: adding backend `lexmark' [22:29:06.196279] [dll] add_backend: adding backend `ma1509' [22:29:06.196308] [dll] add_backend: adding backend `magicolor' [22:29:06.196344] [dll] add_backend: adding backend `matsushita' [22:29:06.196371] [dll] add_backend: adding backend `microtek' [22:29:06.196393] [dll] add_backend: adding backend `microtek2' [22:29:06.196414] [dll] add_backend: adding backend `mustek' [22:29:06.196435] [dll] add_backend: adding backend `mustek_usb' [22:29:06.196458] [dll] add_backend: adding backend `mustek_usb2' [22:29:06.196481] [dll] add_backend: adding backend `nec' [22:29:06.196504] [dll] add_backend: adding backend `niash' [22:29:06.196527] [dll] add_backend: adding backend `pie' [22:29:06.196549] [dll] add_backend: adding backend `pieusb' [22:29:06.196572] [dll] add_backend: adding backend `pint' [22:29:06.196595] [dll] add_backend: adding backend `pixma' [22:29:06.196617] [dll] add_backend: adding backend `plustek' [22:29:06.196641] [dll] add_backend: adding backend `qcam' [22:29:06.196663] [dll] add_backend: adding backend `ricoh' [22:29:06.196686] [dll] add_backend: adding backend `ricoh2' [22:29:06.196715] [dll] add_backend: adding backend `rts8891' [22:29:06.196739] [dll] add_backend: adding backend `s9036' [22:29:06.196762] [dll] add_backend: adding backend `sceptre' [22:29:06.196785] [dll] add_backend: adding backend `sharp' [22:29:06.196809] [dll] add_backend: adding backend `sm3600' [22:29:06.196832] [dll] add_backend: adding backend `sm3840' [22:29:06.196855] [dll] add_backend: adding backend `snapscan' [22:29:06.196878] [dll] add_backend: adding backend `sp15c' [22:29:06.196902] [dll] add_backend: adding backend `tamarack' [22:29:06.196928] [dll] add_backend: adding backend `teco1' [22:29:06.196960] [dll] add_backend: adding backend `teco2' [22:29:06.196986] [dll] add_backend: adding backend `teco3' [22:29:06.197007] [dll] add_backend: adding backend `u12' [22:29:06.197026] [dll] add_backend: adding backend `umax' [22:29:06.197046] [dll] add_backend: adding backend `umax1220u' [22:29:06.197068] [dll] add_backend: adding backend `v4l' [22:29:06.197100] [dll] add_backend: adding backend `xerox_mfp' [22:29:06.197170] [dll] sane_get_devices [22:29:06.197195] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.197215] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [22:29:06.197242] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [22:29:06.197465] [dll] init: initializing backend `xerox_mfp' [22:29:06.201651] [dll] init: backend `xerox_mfp' is version 1.0.13 [22:29:06.201744] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.201757] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [22:29:06.201770] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [22:29:06.201781] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [22:29:06.201793] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory) [22:29:06.201803] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1' [22:29:06.201818] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory) [22:29:06.201827] [dll] load: couldn't find backend `v4l' (No such file or directory) [22:29:06.201837] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.201848] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [22:29:06.201864] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [22:29:06.201993] [dll] init: initializing backend `umax1220u' [22:29:06.205300] [dll] init: backend `umax1220u' is version 1.0.2 [22:29:06.205316] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.205326] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [22:29:06.205339] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [22:29:06.205485] [dll] init: initializing backend `umax' [22:29:06.209940] [dll] init: backend `umax' is version 1.0.45 [22:29:06.209954] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.209965] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [22:29:06.209977] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [22:29:06.210101] [dll] init: initializing backend `u12' [22:29:06.213126] [dll] init: backend `u12' is version 1.0.0 [22:29:06.213141] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.213152] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [22:29:06.213165] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [22:29:06.213248] [dll] init: initializing backend `teco3' [22:29:06.213777] [dll] init: backend `teco3' is version 1.0.1 [22:29:06.213790] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.213798] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [22:29:06.213813] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [22:29:06.213894] [dll] init: initializing backend `teco2' [22:29:06.214936] [dll] init: backend `teco2' is version 1.0.10 [22:29:06.214949] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.214957] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [22:29:06.214971] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [22:29:06.215051] [dll] init: initializing backend `teco1' [22:29:06.215673] [dll] init: backend `teco1' is version 1.0.10 [22:29:06.215687] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.215698] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [22:29:06.215712] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [22:29:06.215800] [dll] init: initializing backend `tamarack' [22:29:06.216100] [dll] init: backend `tamarack' is version 1.0.0 [22:29:06.216112] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.216123] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [22:29:06.216135] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [22:29:06.216222] [dll] init: initializing backend `sp15c' [22:29:06.216369] [dll] init: backend `sp15c' is version 1.0.0 [22:29:06.216383] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.216392] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [22:29:06.216406] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [22:29:06.216535] [dll] init: initializing backend `snapscan' [22:29:06.220032] [dll] init: backend `snapscan' is version 1.4.53 [22:29:06.220046] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.220057] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [22:29:06.220069] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [22:29:06.220186] [dll] init: initializing backend `sm3840' [22:29:06.223361] [dll] init: backend `sm3840' is version 1.0.0 [22:29:06.223377] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.223387] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [22:29:06.223401] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [22:29:06.223539] [dll] init: initializing backend `sm3600' [22:29:06.226980] [dll] init: backend `sm3600' is version 1.0.6 [22:29:06.226994] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.227005] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [22:29:06.227017] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [22:29:06.227128] [dll] init: initializing backend `sharp' [22:29:06.227457] [dll] init: backend `sharp' is version 1.0.0 [22:29:06.227470] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.227481] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [22:29:06.227493] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [22:29:06.227569] [dll] init: initializing backend `sceptre' [22:29:06.227853] [dll] init: backend `sceptre' is version 1.0.10 [22:29:06.227865] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.227873] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [22:29:06.227888] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [22:29:06.227963] [dll] init: initializing backend `s9036' [22:29:06.228165] [dll] init: backend `s9036' is version 1.0.0 [22:29:06.228178] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.228188] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [22:29:06.228202] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [22:29:06.228317] [dll] init: initializing backend `rts8891' [22:29:06.231305] [dll] init: backend `rts8891' is version 1.0.2401 [22:29:06.231366] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.231375] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [22:29:06.231388] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [22:29:06.231497] [dll] init: initializing backend `ricoh2' [22:29:06.234442] [dll] init: backend `ricoh2' is version 1.0.0 [22:29:06.234455] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.234466] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [22:29:06.234479] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [22:29:06.234570] [dll] init: initializing backend `ricoh' [22:29:06.234780] [dll] init: backend `ricoh' is version 1.0.0 [22:29:06.234793] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.234803] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [22:29:06.234815] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [22:29:06.234889] [dll] init: initializing backend `qcam' [22:29:06.234931] [dll] init: backend `qcam' is version 1.0.0 [22:29:06.234941] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.234948] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [22:29:06.234960] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [22:29:06.235082] [dll] init: initializing backend `plustek' [22:29:06.238231] [dll] init: backend `plustek' is version 1.0.0 [22:29:06.238249] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.238257] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [22:29:06.238270] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [22:29:06.238586] [dll] init: initializing backend `pixma' [22:29:06.241650] [dll] init: backend `pixma' is version 1.0.27 [22:29:06.762407] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.762462] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [22:29:06.762501] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [22:29:06.762528] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1' [22:29:06.762561] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory) [22:29:06.762587] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1' [22:29:06.762619] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory) [22:29:06.762644] [dll] load: couldn't find backend `pint' (No such file or directory) [22:29:06.762670] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.762695] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [22:29:06.762737] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [22:29:06.763117] [dll] init: initializing backend `pieusb' [22:29:06.771066] [dll] init: backend `pieusb' is version 1.0.1 [22:29:06.771088] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.771100] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [22:29:06.771119] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [22:29:06.771238] [dll] init: initializing backend `pie' [22:29:06.771925] [dll] init: backend `pie' is version 1.0.9 [22:29:06.771944] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.771956] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [22:29:06.771974] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [22:29:06.772134] [dll] init: initializing backend `niash' [22:29:06.776835] [dll] init: backend `niash' is version 1.0.1 [22:29:06.776857] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.776870] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [22:29:06.776889] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [22:29:06.777033] [dll] init: initializing backend `nec' [22:29:06.777346] [dll] init: backend `nec' is version 1.0.0 [22:29:06.777364] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.777376] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [22:29:06.777394] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [22:29:06.777561] [dll] init: initializing backend `mustek_usb2' [22:29:06.777591] [dll] init: backend `mustek_usb2' is version 1.0.10 [22:29:06.782143] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.782163] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [22:29:06.782183] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [22:29:06.782372] [dll] init: initializing backend `mustek_usb' [22:29:06.785474] [dll] init: backend `mustek_usb' is version 1.0.18 [22:29:06.785488] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.785499] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [22:29:06.785511] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [22:29:06.785672] [dll] init: initializing backend `mustek' [22:29:06.786131] [dll] init: backend `mustek' is version 1.0.138 [22:29:06.786144] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.786155] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [22:29:06.786167] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [22:29:06.786255] [dll] init: initializing backend `microtek2' [22:29:06.786606] [dll] init: backend `microtek2' is version 1.0.0 [22:29:06.786623] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.786634] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [22:29:06.786646] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [22:29:06.786725] [dll] init: initializing backend `microtek' [22:29:06.787079] [dll] init: backend `microtek' is version 1.0.0 [22:29:06.787092] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.787103] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [22:29:06.787117] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [22:29:06.787205] [dll] init: initializing backend `matsushita' [22:29:06.787808] [dll] init: backend `matsushita' is version 1.0.7 [22:29:06.787821] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:06.787832] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [22:29:06.787844] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [22:29:06.788486] [dll] init: initializing backend `magicolor' [22:29:06.791670] [dll] init: backend `magicolor' is version 1.0.1 [22:29:08.294007] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.294059] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [22:29:08.294100] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [22:29:08.294465] [dll] init: initializing backend `ma1509' [22:29:08.301598] [dll] init: backend `ma1509' is version 1.0.3 [22:29:08.301624] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.301640] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [22:29:08.301662] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [22:29:08.301861] [dll] init: initializing backend `lexmark' [22:29:08.307853] [dll] init: backend `lexmark' is version 1.0.32 [22:29:08.307961] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.307982] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [22:29:08.308005] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [22:29:08.308153] [dll] init: initializing backend `leo' [22:29:08.308868] [dll] init: backend `leo' is version 1.0.11 [22:29:08.308892] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.308907] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [22:29:08.308933] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [22:29:08.309140] [dll] init: initializing backend `kvs40xx' [22:29:08.312910] [dll] init: backend `kvs40xx' is version 1.0.1 [22:29:08.313211] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.313223] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [22:29:08.313240] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [22:29:08.313369] [dll] init: initializing backend `kvs20xx' [22:29:08.316460] [dll] init: backend `kvs20xx' is version 1.0.2 [22:29:08.317053] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.317069] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [22:29:08.317085] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [22:29:08.317218] [dll] init: initializing backend `kvs1025' [22:29:08.320303] [dll] init: backend `kvs1025' is version 1.0.5 [22:29:08.320317] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:08.320328] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [22:29:08.320341] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [22:29:08.321091] [dll] init: initializing backend `kodakaio' [22:29:08.324382] [dll] init: backend `kodakaio' is version 1.0.3 [22:29:10.260563] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.260610] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [22:29:10.260649] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [22:29:10.260924] [dll] init: initializing backend `kodak' [22:29:10.260969] [dll] init: backend `kodak' is version 1.0.7 [22:29:10.261328] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.261368] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [22:29:10.261422] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [22:29:10.261637] [dll] init: initializing backend `ibm' [22:29:10.262186] [dll] init: backend `ibm' is version 1.0.0 [22:29:10.262226] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.262269] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [22:29:10.262349] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [22:29:10.262568] [dll] init: initializing backend `hs2p' [22:29:10.263321] [dll] init: backend `hs2p' is version 1.0.0 [22:29:10.263353] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.263375] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [22:29:10.263406] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [22:29:10.263638] [dll] init: initializing backend `hpsj5s' [22:29:10.263755] [dll] init: backend `hpsj5s' is version 1.0.3 [22:29:10.263799] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.263834] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [22:29:10.263883] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [22:29:10.264174] [dll] init: initializing backend `hpljm1005' [22:29:10.271306] [dll] init: backend `hpljm1005' is version 1.0.1 [22:29:10.271320] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.271331] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [22:29:10.271344] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [22:29:10.271481] [dll] init: initializing backend `hp5590' [22:29:10.274734] [dll] init: backend `hp5590' is version 1.0.8 [22:29:10.274748] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.274759] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [22:29:10.274772] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [22:29:10.274923] [dll] init: initializing backend `hp5400' [22:29:10.277908] [dll] init: backend `hp5400' is version 1.0.3 [22:29:10.277922] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.277933] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [22:29:10.277945] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [22:29:10.278076] [dll] init: initializing backend `hp4200' [22:29:10.281118] [dll] init: backend `hp4200' is version 1.0.0 [22:29:10.281132] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.281143] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [22:29:10.281155] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [22:29:10.281582] [dll] init: initializing backend `hp3900' [22:29:10.284967] [dll] init: backend `hp3900' is version 1.0.0 [22:29:10.284982] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.284993] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [22:29:10.285008] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [22:29:10.285146] [dll] init: initializing backend `hp3500' [22:29:10.288393] [dll] init: backend `hp3500' is version 1.0.0 [22:29:10.288414] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.288424] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [22:29:10.288439] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [22:29:10.288609] [dll] init: initializing backend `hp' [22:29:10.288636] [dll] init: backend `hp' is version 1.0.8 [22:29:10.292208] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.292221] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [22:29:10.292237] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [22:29:10.292395] [dll] init: initializing backend `gt68xx' [22:29:10.295538] [dll] init: backend `gt68xx' is version 1.0.84 [22:29:10.295644] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.295657] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [22:29:10.295670] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [22:29:10.296058] [dll] init: initializing backend `genesys' [22:29:10.299718] [dll] init: backend `genesys' is version 1.0.0 [22:29:10.299799] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.299814] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [22:29:10.299828] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [22:29:10.299962] [dll] init: initializing backend `fujitsu' [22:29:10.299986] [dll] init: backend `fujitsu' is version 1.0.134 [22:29:10.303355] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:10.303370] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [22:29:10.303387] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [22:29:10.314203] [dll] init: initializing backend `escl' [22:29:10.314433] [dll] init: backend `escl' is version 1.0.0 [22:29:11.321881] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:11.321929] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [22:29:11.321973] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [22:29:11.322476] [dll] init: initializing backend `epsonds' [22:29:11.330782] [dll] init: backend `epsonds' is version 1.0.0 [22:29:11.330859] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:11.330876] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [22:29:11.330893] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [22:29:11.331076] [dll] init: initializing backend `epson2' [22:29:11.335320] [dll] init: backend `epson2' is version 1.0.124 [22:29:12.336754] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.336804] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [22:29:12.336847] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [22:29:12.337246] [dll] init: initializing backend `epjitsu' [22:29:12.337291] [dll] init: backend `epjitsu' is version 1.0.31 [22:29:12.345705] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.345740] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [22:29:12.345775] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [22:29:12.345998] [dll] init: initializing backend `dmc' [22:29:12.346561] [dll] init: backend `dmc' is version 1.0.0 [22:29:12.346592] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.346614] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [22:29:12.346646] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [22:29:12.346948] [dll] init: initializing backend `dell1600n_net' [22:29:12.346985] [dll] init: backend `dell1600n_net' is version 1.0.0 [22:29:12.647614] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.647661] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [22:29:12.647705] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [22:29:12.648075] [dll] init: initializing backend `coolscan3' [22:29:12.656424] [dll] init: backend `coolscan3' is version 1.0.0 [22:29:12.656792] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.656825] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [22:29:12.656858] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [22:29:12.657184] [dll] init: initializing backend `coolscan' [22:29:12.657948] [dll] init: backend `coolscan' is version 1.0.0 [22:29:12.657981] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.658003] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [22:29:12.658035] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [22:29:12.658368] [dll] init: initializing backend `cardscan' [22:29:12.661788] [dll] init: backend `cardscan' is version 1.0.3 [22:29:12.661845] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.661860] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [22:29:12.661876] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [22:29:12.662031] [dll] init: initializing backend `canon_dr' [22:29:12.662054] [dll] init: backend `canon_dr' is version 1.0.58 [22:29:12.665532] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.665546] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [22:29:12.665561] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [22:29:12.665700] [dll] init: initializing backend `canon630u' [22:29:12.668777] [dll] init: backend `canon630u' is version 1.0.1 [22:29:12.668791] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.668802] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [22:29:12.668814] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [22:29:12.668920] [dll] init: initializing backend `canon' [22:29:12.669070] [dll] init: backend `canon' is version 1.0.0 [22:29:12.669084] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.669093] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [22:29:12.669106] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [22:29:12.669210] [dll] init: initializing backend `bh' [22:29:12.669521] [dll] init: backend `bh' is version 1.0.4 [22:29:12.669534] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.669544] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [22:29:12.669556] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [22:29:12.669704] [dll] init: initializing backend `avision' [22:29:12.678673] [dll] init: backend `avision' is version 1.0.297 [22:29:12.684036] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.684050] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [22:29:12.684065] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [22:29:12.684187] [dll] init: initializing backend `as6e' [22:29:12.684245] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.684259] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [22:29:12.684276] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [22:29:12.684418] [dll] init: initializing backend `artec_eplus48u' [22:29:12.687755] [dll] init: backend `artec_eplus48u' is version 1.0.0 [22:29:12.687771] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.687782] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [22:29:12.687795] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [22:29:12.687905] [dll] init: initializing backend `artec' [22:29:12.688207] [dll] init: backend `artec' is version 1.0.0 [22:29:12.688219] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.688230] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [22:29:12.688242] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [22:29:12.688343] [dll] init: initializing backend `apple' [22:29:12.688638] [dll] init: backend `apple' is version 1.0.0 [22:29:12.688650] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.688661] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [22:29:12.688673] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [22:29:12.688787] [dll] init: initializing backend `agfafocus' [22:29:12.689004] [dll] init: backend `agfafocus' is version 1.0.0 [22:29:12.689016] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.689026] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [22:29:12.689039] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [22:29:12.689141] [dll] init: initializing backend `abaton' [22:29:12.689439] [dll] init: backend `abaton' is version 1.0.0 [22:29:12.689451] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.689461] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [22:29:12.689473] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [22:29:12.689625] [dll] init: initializing backend `net' [22:29:12.695101] [dll] init: backend `net' is version 1.0.29 [22:29:12.695123] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [22:29:12.695136] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [22:29:12.695155] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [22:29:12.696212] [dll] init: initializing backend `hpaio' [22:29:12.697424] [dll] init: backend `hpaio' is version 1.0.0 [22:29:14.097034] [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [22:29:14.097135] [dll] sane_exit: exiting [22:29:14.097172] [dll] sane_exit: calling backend `xerox_mfp's exit function [22:29:14.097345] [dll] sane_exit: calling backend `umax1220u's exit function [22:29:14.097483] [dll] sane_exit: calling backend `umax's exit function [22:29:14.097624] [dll] sane_exit: calling backend `u12's exit function [22:29:14.097744] [dll] sane_exit: calling backend `teco3's exit function [22:29:14.097853] [dll] sane_exit: calling backend `teco2's exit function [22:29:14.097961] [dll] sane_exit: calling backend `teco1's exit function [22:29:14.098066] [dll] sane_exit: calling backend `tamarack's exit function [22:29:14.098173] [dll] sane_exit: calling backend `sp15c's exit function [22:29:14.098316] [dll] sane_exit: calling backend `snapscan's exit function [22:29:14.098452] [dll] sane_exit: calling backend `sm3840's exit function [22:29:14.098579] [dll] sane_exit: calling backend `sm3600's exit function [22:29:14.098696] [dll] sane_exit: calling backend `sharp's exit function [22:29:14.098804] [dll] sane_exit: calling backend `sceptre's exit function [22:29:14.098907] [dll] sane_exit: calling backend `s9036's exit function [22:29:14.099007] [dll] sane_exit: calling backend `rts8891's exit function [22:29:14.099133] [dll] sane_exit: calling backend `ricoh2's exit function [22:29:14.099299] [dll] sane_exit: calling backend `ricoh's exit function [22:29:14.099424] [dll] sane_exit: calling backend `qcam's exit function [22:29:14.099537] [dll] sane_exit: calling backend `plustek's exit function [22:29:14.099669] [dll] sane_exit: calling backend `pixma's exit function [22:29:14.099794] [dll] sane_exit: calling backend `pieusb's exit function [22:29:14.099912] [dll] sane_exit: calling backend `pie's exit function [22:29:14.100015] [dll] sane_exit: calling backend `niash's exit function [22:29:14.100121] [dll] sane_exit: calling backend `nec's exit function [22:29:14.100223] [dll] sane_exit: calling backend `mustek_usb2's exit function [22:29:14.100336] [dll] sane_exit: calling backend `mustek_usb's exit function [22:29:14.100462] [dll] sane_exit: calling backend `mustek's exit function [22:29:14.100594] [dll] sane_exit: calling backend `microtek2's exit function [22:29:14.100717] [dll] sane_exit: calling backend `microtek's exit function [22:29:14.100835] [dll] sane_exit: calling backend `matsushita's exit function [22:29:14.100947] [dll] sane_exit: calling backend `magicolor's exit function [22:29:14.101068] [dll] sane_exit: calling backend `ma1509's exit function [22:29:14.101190] [dll] sane_exit: calling backend `lexmark's exit function [22:29:14.101365] [dll] sane_exit: calling backend `leo's exit function [22:29:14.101469] [dll] sane_exit: calling backend `kvs40xx's exit function [22:29:14.101578] [dll] sane_exit: calling backend `kvs20xx's exit function [22:29:14.101685] [dll] sane_exit: calling backend `kvs1025's exit function [22:29:14.101788] [dll] sane_exit: calling backend `kodakaio's exit function [22:29:14.101896] [dll] sane_exit: calling backend `kodak's exit function [22:29:14.102002] [dll] sane_exit: calling backend `ibm's exit function [22:29:14.102100] [dll] sane_exit: calling backend `hs2p's exit function [22:29:14.102206] [dll] sane_exit: calling backend `hpsj5s's exit function [22:29:14.102364] [dll] sane_exit: calling backend `hpljm1005's exit function [22:29:14.102438] [dll] sane_exit: calling backend `hp5590's exit function [22:29:14.102507] [dll] sane_exit: calling backend `hp5400's exit function [22:29:14.102572] [dll] sane_exit: calling backend `hp4200's exit function [22:29:14.102637] [dll] sane_exit: calling backend `hp3900's exit function [22:29:14.102709] [dll] sane_exit: calling backend `hp3500's exit function [22:29:14.102778] [dll] sane_exit: calling backend `hp's exit function [22:29:14.102864] [dll] sane_exit: calling backend `gt68xx's exit function [22:29:14.102966] [dll] sane_exit: calling backend `genesys's exit function [22:29:14.103246] [dll] sane_exit: calling backend `fujitsu's exit function [22:29:14.103331] [dll] sane_exit: calling backend `escl's exit function [22:29:14.103815] [dll] sane_exit: calling backend `epsonds's exit function [22:29:14.103884] [dll] sane_exit: calling backend `epson2's exit function [22:29:14.103957] [dll] sane_exit: calling backend `epjitsu's exit function [22:29:14.104025] [dll] sane_exit: calling backend `dmc's exit function [22:29:14.104083] [dll] sane_exit: calling backend `dell1600n_net's exit function [22:29:14.104218] [dll] sane_exit: calling backend `coolscan3's exit function [22:29:14.104287] [dll] sane_exit: calling backend `coolscan's exit function [22:29:14.104354] [dll] sane_exit: calling backend `cardscan's exit function [22:29:14.104415] [dll] sane_exit: calling backend `canon_dr's exit function [22:29:14.104491] [dll] sane_exit: calling backend `canon630u's exit function [22:29:14.104551] [dll] sane_exit: calling backend `canon's exit function [22:29:14.104610] [dll] sane_exit: calling backend `bh's exit function [22:29:14.104669] [dll] sane_exit: calling backend `avision's exit function [22:29:14.104767] [dll] sane_exit: calling backend `artec_eplus48u's exit function [22:29:14.104829] [dll] sane_exit: calling backend `artec's exit function [22:29:14.104890] [dll] sane_exit: calling backend `apple's exit function [22:29:14.104946] [dll] sane_exit: calling backend `agfafocus's exit function [22:29:14.105002] [dll] sane_exit: calling backend `abaton's exit function [22:29:14.105057] [dll] sane_exit: calling backend `net's exit function [22:29:14.105839] [dll] sane_exit: calling backend `hpaio's exit function [22:29:14.106537] [dll] sane_exit: finished
dpkg -l *sane* | grep ii
ii libsane:amd64 1.0.29-0ubuntu5.2 amd64 API library for scanners ii libsane-common 1.0.29-0ubuntu5.2 all API library for scanners -- documentation and support files ii libsane-hpaio:amd64 3.20.3+dfsg0-2 amd64 HP SANE backend for multi-function peripherals ii sane-utils 1.0.29-0ubuntu5.2 amd64 API library for scanners -- utilities
dpkg -l *cups* lpr* | grep ii
ii bluez-cups 5.53-0ubuntu3 amd64 Bluetooth printer driver for CUPS ii cups 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface ii cups-browsed 1.27.4-1 amd64 OpenPrinting CUPS Filters - cups-browsed ii cups-bsd 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - BSD commands ii cups-client 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - client programs (SysV) ii cups-common 2.3.1-9ubuntu1.1 all Common UNIX Printing System(tm) - common files ii cups-core-drivers 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - driverless printing ii cups-daemon 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - daemon ii cups-filters 1.27.4-1 amd64 OpenPrinting CUPS Filters - Main Package ii cups-filters-core-drivers 1.27.4-1 amd64 OpenPrinting CUPS Filters - Driverless printing ii cups-ipp-utils 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - IPP developer/admin utilities ii cups-pk-helper 0.2.6-1ubuntu3 amd64 PolicyKit helper to configure cups with fine-grained privileges ii cups-ppdc 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - PPD manipulation utilities ii cups-server-common 2.3.1-9ubuntu1.1 all Common UNIX Printing System(tm) - server common files ii libcups2:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Core library ii libcupsfilters1:amd64 1.27.4-1 amd64 OpenPrinting CUPS Filters - Shared library ii libcupsimage2:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Raster image library ii printer-driver-hpcups 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii python3-cups 1.9.73-3build1 amd64 Python3 bindings for CUPS ii python3-cupshelpers 1.5.12-0ubuntu1.1 all Python utility modules around the CUPS printing system
dpkg -l libusb* | grep ii
ii libusb-1.0-0:amd64 2:1.0.23-2build1 amd64 userspace USB programming library ii libusbmuxd6:amd64 2.0.1-2 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
dpkg -l | egrep Brother
ii dcp195clpr:i386 1.1.3-1 i386 Brother lpr Inkjet Printer Definitions ii printer-driver-brlaser 6-1build1 amd64 printer driver for (some) Brother laser printers ii printer-driver-ptouch 1.4.2-3 amd64 printer driver Brother P-touch label printers
systemctl --no-pager status sane* cups*
● cups.socket - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
Active: active (running) since Fri 2021-04-16 22:18:36 CEST; 35min ago
Triggers: ● cups.service
Listen: /run/cups/cups.sock (Stream)
CGroup: /system.slice/cups.socket
Apr 16 22:18:36 pc systemd[1]: Listening on CUPS Scheduler.
● cups.service - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2021-04-16 22:18:36 CEST; 35min ago
TriggeredBy: ● cups.socket
● cups.path
Docs: man:cupsd(8)
Main PID: 54168 (cupsd)
Tasks: 3 (limit: 19135)
Memory: 10.7M
CGroup: /system.slice/cups.service
├─54168 /usr/sbin/cupsd -l
├─54212 /usr/lib/cups/notifier/dbus dbus://
└─54455 /usr/lib/cups/notifier/dbus dbus://
Apr 16 22:18:36 pc systemd[1]: Started CUPS Scheduler.
Apr 16 22:21:48 pc /hpfax[54372]: [54372]: error: Failed to cre…lip
Hint: Some lines were ellipsized, use -l to show in full.lpstat -t
eitplandienst läuft Keine systemvoreingestellten Ziele Gerät für DCP-195C: usb://Brother/DCP-195C?serial=BROK0F135267 DCP-195C akzeptiert Anfragen seit Fr 16 Apr 2021 22:41:47 CEST Drucker DCP-195C ist im Leerlauf. Aktiviert seit Fr 16 Apr 2021 22:41:47 CEST DCP-195C-47 anonymous 1024 Fr 16 Apr 2021 22:22:18 CEST
lpinfo -v
network beh network https serial serial:/dev/ttyS0?baud=115200 network lpd file cups-brf:/ direct hp network ipps network ipp network socket network http direct usb://Brother/DCP-195C?serial=BROK0F135267 direct hpfax
uname -rm
5.8.0-50-generic x86_64
dmesg | grep printer
[ 18.226829] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 63.255657] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 594.919845] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 626.027985] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 680.782608] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 710.648944] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 786.412496] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 809.023132] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 1137.215987] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 1380.181235] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 1388.665887] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 1388.817339] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 1417.254542] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 1451.459317] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 6959.044581] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 6991.024426] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 7042.654081] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 7383.458975] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 7395.971448] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 7823.069539] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [ 7836.555093] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14143.791262] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14161.039309] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14206.112874] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14232.881470] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14262.146745] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14318.965665] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14337.186897] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14342.301835] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14344.517887] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14452.352671] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [14950.704644] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [15265.038832] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [15279.543771] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [15420.983685] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [15446.170288] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [15452.059602] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [15528.122650] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [16250.823978] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [16366.924424] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [16607.045743] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [16619.971050] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222 [17506.890584] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
id
uid=1000(pc) gid=1000(pc) Gruppen=1000(pc),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),120(lpadmin),131(lxd),132(sambashare)
ls -l /etc/cups/ppd/*
-rw-r----- 1 root lp 12231 Apr 16 22:23 /etc/cups/ppd/DCP-195C.ppd -rw-r----- 1 root lp 12231 Apr 16 22:22 /etc/cups/ppd/DCP-195C.ppd.O