|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
Done.
Es funktioniert alles (beide Drucker und der Scanner) einwandfrei. Ob das Problem mit dem Icon noch besteht, schaue ich noch nach. Herzlichen Dank! Lg X. |
Anmeldungsdatum: Beiträge: 19617 |
|
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
Klar. Es hat jetzt die neue Höchstzahl von 5 Fehlern 😈 : hp-check
Saving output in log file: /home/michael1972/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
\Gtk-Message: 13:43:33.043: Failed to load module "canberra-gtk-module"
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 GNU/Linux
Host: michael1972-desktop
Proc: 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.17.10
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
[installation]
date_time = 05/18/18 13:43:33
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.22 OK -
Gtk-Message: 13:43:34.636: Failed to load module "canberra-gtk-module"
Gtk-Message: 13:43:34.652: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.5 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.5 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-100-colorMFP-M175a
------------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%20100%20colorMFP%20M175a?serial=00CND8F1W4RW&interface=1
PPD: /etc/cups/ppd/HP-LaserJet-100-colorMFP-M175a.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-100-colorMFP-M175a.ppd ppd file
PPD Description:
Printer status: Drucker HP-LaserJet-100-colorMFP-M175a ist im Leerlauf. Aktiviert seit Do 17 Mai 2018 23:29:41 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-LaserJet-1010
----------------
Type: Printer
Device URI: hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
PPD: /etc/cups/ppd/hp-LaserJet-1010.ppd
warning: Failed to read /etc/cups/ppd/hp-LaserJet-1010.ppd ppd file
PPD Description:
Printer status: Drucker hp-LaserJet-1010 ist im Leerlauf. Aktiviert seit Do 17 Mai 2018 23:32:55 CEST
error: Unable to communicate with device (code=12): hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 5
Total Warnings: 1
Done.Rest folgt gleich! Lg X. |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
|
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
> hp-systray -x > macht hp-systray -x Command 'hp-systray' not found, but can be installed with: sudo apt install hplip-gui Soll ich hplip-gui installieren? Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
In der Ruhe liegt die Kraft 😬 sudo apt install hplip-gui python3-pyqt4 gtk2-engines-pixbuf python3-dev Danach noch mal die selben abfragen zeigen. |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
Nach der erfolgreich verlaufenen Installation der genannten Pakete: hp-check
Saving output in log file: /home/michael1972/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
\Gtk-Message: 17:49:16.533: Failed to load module "canberra-gtk-module"
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 GNU/Linux
Host: michael1972-desktop
Proc: 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.17.10
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
[installation]
date_time = 05/18/18 17:49:17
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.22 OK -
Gtk-Message: 17:49:18.128: Failed to load module "canberra-gtk-module"
Gtk-Message: 17:49:18.142: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.12.1 MISSING 'python3-pyqt4-dbus needs to be installed'
python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.6.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------------------- -----------------------------------------
hp:/usb/hp_LaserJet_1010?serial=00CNFD006114 HP LaserJet 1010
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-100-colorMFP-M175a
------------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%20100%20colorMFP%20M175a?serial=00CND8F1W4RW&interface=1
PPD: /etc/cups/ppd/HP-LaserJet-100-colorMFP-M175a.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-100-colorMFP-M175a.ppd ppd file
PPD Description:
Printer status: Drucker HP-LaserJet-100-colorMFP-M175a ist im Leerlauf. Aktiviert seit Do 17 Mai 2018 23:29:41 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-LaserJet-1010
----------------
Type: Printer
Device URI: hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
PPD: /etc/cups/ppd/hp-LaserJet-1010.ppd
warning: Failed to read /etc/cups/ppd/hp-LaserJet-1010.ppd ppd file
PPD Description:
Printer status: Drucker hp-LaserJet-1010 ist im Leerlauf. Aktiviert seit Do 17 Mai 2018 23:32:55 CEST
Communication status: Good
--------------
| PERMISSION |
--------------
USB hp-LaserJet-1010 Required - - OK Node:'/dev/bus/usb/003/004' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 1
Total Warnings: 1
Done.
|
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
hplip-gui ergibt aber weiterhin hplip-gui: Befehl nicht gefunden. Lg X. |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
hp-systray -x macht HP Linux Imaging and Printing System (ver. 3.17.10) System Tray Status Service ver. 2.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. und bleibt mit blinkendem Cursor stehen. Lg X. |
|
Anmeldungsdatum: Beiträge: 2818 |
|
|
Anmeldungsdatum: Beiträge: 19617 |
|
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
ergibt /usr/bin/hp-toolbox HP Linux Imaging and Printing System (ver. 3.17.10) HP Device Manager ver. 15.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. / HP Linux Imaging and Printing System (ver. 3.17.10) System Tray Status Service ver. 2.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. error: Unable to communicate with device (code=12): hp:/usb/hp_LaserJet_1010?serial=00CNFD006114 error: Device not found error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW error: Device not found Auch neckisch: Wie ein Zombie habe ich jetzt den MFP wieder doppelt installiert, wie von einem bösen Geist. Brauche ich vielleicht einen Exorzisten? Ich habe jetzt noch nicht alle Gerätefunktionen erneut durchgetestet; drucken ab dem MFP (für mich das Wichtigste) geht aber.
Lief durch. Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
Unable to communicate with device (code=12) Bedeutet das die Geräte ausgeschaltet sind. Mal einschalten und nochmal probieren. In der Gruppe lp und lpadmin bist du? id |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
Unable to communicate with device (code=12) Mit wunderbar eingeschalteten Geräten: /usr/bin/hp-toolbox macht HP Linux Imaging and Printing System (ver. 3.17.10) HP Device Manager ver. 15.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. / HP Linux Imaging and Printing System (ver. 3.17.10) System Tray Status Service ver. 2.0 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. error: Unable to communicate with device (code=12): hp:/usb/hp_LaserJet_1010?serial=00CNFD006114 error: Device not found error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW error: Device not found
macht uid=1000(BENUTZER) gid=1000(BENUTZER) Gruppen=1000(BENUTZER),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),126(sambashare) Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
Macht du bist nicht in der Gruppe lp 😬 |
