Hallihallo, ich habe ein Problem, einen HP Deskjet 2540 unter einer frischen Ubuntu 20.04 Installation zum Laufen zu bringen. Weder Drucken noch Scannen will. Simple Scan findet den Drucker/Scanner, aber beim Scanversuch zeigt er "Verbindung zum Scanner konnte nicht hergestellt werden". Wenn ich eine Testseite drucken will, sendet er sie scheinbar, aber in der Druckerwarteschlange steht beim Auftrag "Ausführung läuft - Nicht angeschlossen?" und es bewegt sich nichts.
Nach dem, was ich beim Einstecken des Druckers im Journal sehe, sieht es mir irgendwie nach einem Berechtigungsproblem aus:
$ journalctl -f -- Logs begin at Tue 2020-05-12 20:53:22 CEST. -- Jun 03 20:16:54 uta-ZenBook-UX431DA-UM431DA systemd[1]: ippusbxd@001:004.service: Succeeded. Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 31 with keysym 31 (keycode a). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 32 with keysym 32 (keycode b). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 38 with keysym 38 (keycode 11). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 39 with keysym 39 (keycode 12). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 33 with keysym 33 (keycode c). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 34 with keysym 34 (keycode d). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 35 with keysym 35 (keycode e). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 36 with keysym 36 (keycode f). Jun 03 20:16:58 uta-ZenBook-UX431DA-UM431DA gnome-shell[1366]: Window manager warning: Overwriting existing binding of keysym 37 with keysym 37 (keycode 10). Jun 03 20:17:01 uta-ZenBook-UX431DA-UM431DA CRON[3855]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 03 20:17:01 uta-ZenBook-UX431DA-UM431DA CRON[3863]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 03 20:17:01 uta-ZenBook-UX431DA-UM431DA CRON[3855]: pam_unix(cron:session): session closed for user root Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA dbus-daemon[931]: [session uid=1000 pid=931] Activating via systemd: service name='org.freedesktop.Tracker1' unit='tracker-store.service' requested by ':1.1' (uid=1000 pid=920 comm="/usr/libexec/tracker-miner-fs " label="unconfined") Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA systemd[908]: Starting Tracker metadata database store and lookup manager... Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA dbus-daemon[931]: [session uid=1000 pid=931] Successfully activated service 'org.freedesktop.Tracker1' Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA systemd[908]: Started Tracker metadata database store and lookup manager. Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA dbus-daemon[931]: [session uid=1000 pid=931] Activating via systemd: service name='org.freedesktop.Tracker1.Miner.Extract' unit='tracker-extract.service' requested by ':1.1' (uid=1000 pid=920 comm="/usr/libexec/tracker-miner-fs " label="unconfined") Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA systemd[908]: Starting Tracker metadata extractor... Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA tracker-extract[3876]: Set scheduler policy to SCHED_IDLE Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA tracker-extract[3876]: Setting priority nice level to 19 Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA dbus-daemon[931]: [session uid=1000 pid=931] Successfully activated service 'org.freedesktop.Tracker1.Miner.Extract' Jun 03 20:17:05 uta-ZenBook-UX431DA-UM431DA systemd[908]: Started Tracker metadata extractor. Jun 03 20:17:07 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 1152: unable to open hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 Jun 03 20:17:07 uta-ZenBook-UX431DA-UM431DA hp[860]: prnt/backend/hp.c 825: INFO: open device failed stat=12: hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604; will retry in 30 seconds... Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: new high-speed USB device number 5 using xhci_hcd Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: New USB device found, idVendor=03f0, idProduct=c211, bcdDevice= 1.00 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: Product: Deskjet 2540 series Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: Manufacturer: HP Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: SerialNumber: CN3B22DG3N0604 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usblp 1-1:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC211 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA root[3898]: loading HP Device 001 005 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA python3[3900]: io/hpmud/musb.c 2189: [3900] hpmud_make_usb_uri() bus=001 dev=005 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA python3[3900]: io/hpmud/musb.c 2287: hpmud_make_usb_uri() uri=hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 bytes_read=49 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA systemd[1]: Starting Daemon to make IPP-over-USB printers available as network printers (001:005)... Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usb 1-1: usbfs: process 3907 (ippusbxd) did not claim interface 0 before use Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: usblp0: removed Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA systemd[1]: Started Daemon to make IPP-over-USB printers available as network printers (001:005). Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA audit[3924]: AVC apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/nsswitch.conf" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA audit[3924]: AVC apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/nsswitch.conf" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA audit[3924]: AVC apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA audit[3924]: AVC apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA audit[3924]: AVC apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA audit[3924]: AVC apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: audit: type=1400 audit(1591208228.782:127): apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/nsswitch.conf" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: audit: type=1400 audit(1591208228.782:128): apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/nsswitch.conf" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: audit: type=1400 audit(1591208228.782:129): apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: audit: type=1400 audit(1591208228.782:130): apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: TCP: request_sock_TCP: Possible SYN flooding on port 60000. Sending cookies. Check SNMP counters. Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: audit: type=1400 audit(1591208228.782:131): apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:08 uta-ZenBook-UX431DA-UM431DA kernel: audit: type=1400 audit(1591208228.782:132): apparmor="DENIED" operation="open" profile="ippusbxd" name="/etc/passwd" pid=3924 comm="ippusbxd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 Jun 03 20:17:10 uta-ZenBook-UX431DA-UM431DA colord[769]: failed to get session [pid 687]: Keine Daten verfügbar
Die sonstigen Standardangaben:
Scanner
$ export SANE_DEBUG_DLL=255 && scanimage -L [20:21:31.660718] [sanei_debug] Setting debug level of dll to 255. [20:21:31.660893] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29 [20:21:31.660920] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [20:21:31.660961] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [20:21:31.660996] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [20:21:31.661038] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [20:21:31.661077] [dll] sane_init/read_config: reading dll.d/hplip [20:21:31.661104] [dll] add_backend: adding backend `hpaio' [20:21:31.661123] [dll] sane_init/read_dlld: done. [20:21:31.661143] [dll] sane_init/read_config: reading dll.conf [20:21:31.661162] [dll] add_backend: adding backend `net' [20:21:31.661175] [dll] add_backend: adding backend `abaton' [20:21:31.661186] [dll] add_backend: adding backend `agfafocus' [20:21:31.661198] [dll] add_backend: adding backend `apple' [20:21:31.661209] [dll] add_backend: adding backend `artec' [20:21:31.661221] [dll] add_backend: adding backend `artec_eplus48u' [20:21:31.661232] [dll] add_backend: adding backend `as6e' [20:21:31.661243] [dll] add_backend: adding backend `avision' [20:21:31.661255] [dll] add_backend: adding backend `bh' [20:21:31.661266] [dll] add_backend: adding backend `canon' [20:21:31.661277] [dll] add_backend: adding backend `canon630u' [20:21:31.661288] [dll] add_backend: adding backend `canon_dr' [20:21:31.661300] [dll] add_backend: adding backend `cardscan' [20:21:31.661311] [dll] add_backend: adding backend `coolscan' [20:21:31.661323] [dll] add_backend: adding backend `coolscan3' [20:21:31.661335] [dll] add_backend: adding backend `dell1600n_net' [20:21:31.661346] [dll] add_backend: adding backend `dmc' [20:21:31.661358] [dll] add_backend: adding backend `epjitsu' [20:21:31.661369] [dll] add_backend: adding backend `epson2' [20:21:31.661381] [dll] add_backend: adding backend `epsonds' [20:21:31.661392] [dll] add_backend: adding backend `escl' [20:21:31.661404] [dll] add_backend: adding backend `fujitsu' [20:21:31.661415] [dll] add_backend: adding backend `genesys' [20:21:31.661427] [dll] add_backend: adding backend `gt68xx' [20:21:31.661439] [dll] add_backend: adding backend `hp' [20:21:31.661451] [dll] add_backend: adding backend `hp3500' [20:21:31.661462] [dll] add_backend: adding backend `hp3900' [20:21:31.661474] [dll] add_backend: adding backend `hp4200' [20:21:31.661485] [dll] add_backend: adding backend `hp5400' [20:21:31.661497] [dll] add_backend: adding backend `hp5590' [20:21:31.661508] [dll] add_backend: adding backend `hpljm1005' [20:21:31.661520] [dll] add_backend: adding backend `hpsj5s' [20:21:31.661532] [dll] add_backend: adding backend `hs2p' [20:21:31.661543] [dll] add_backend: adding backend `ibm' [20:21:31.661555] [dll] add_backend: adding backend `kodak' [20:21:31.661566] [dll] add_backend: adding backend `kodakaio' [20:21:31.661581] [dll] add_backend: adding backend `kvs1025' [20:21:31.661593] [dll] add_backend: adding backend `kvs20xx' [20:21:31.661605] [dll] add_backend: adding backend `kvs40xx' [20:21:31.661616] [dll] add_backend: adding backend `leo' [20:21:31.661628] [dll] add_backend: adding backend `lexmark' [20:21:31.661640] [dll] add_backend: adding backend `ma1509' [20:21:31.661651] [dll] add_backend: adding backend `magicolor' [20:21:31.661663] [dll] add_backend: adding backend `matsushita' [20:21:31.661675] [dll] add_backend: adding backend `microtek' [20:21:31.661687] [dll] add_backend: adding backend `microtek2' [20:21:31.661699] [dll] add_backend: adding backend `mustek' [20:21:31.661711] [dll] add_backend: adding backend `mustek_usb' [20:21:31.661723] [dll] add_backend: adding backend `mustek_usb2' [20:21:31.661735] [dll] add_backend: adding backend `nec' [20:21:31.661746] [dll] add_backend: adding backend `niash' [20:21:31.661758] [dll] add_backend: adding backend `pie' [20:21:31.661770] [dll] add_backend: adding backend `pieusb' [20:21:31.661782] [dll] add_backend: adding backend `pint' [20:21:31.661794] [dll] add_backend: adding backend `pixma' [20:21:31.661816] [dll] add_backend: adding backend `plustek' [20:21:31.661829] [dll] add_backend: adding backend `qcam' [20:21:31.661841] [dll] add_backend: adding backend `ricoh' [20:21:31.661853] [dll] add_backend: adding backend `ricoh2' [20:21:31.661868] [dll] add_backend: adding backend `rts8891' [20:21:31.661881] [dll] add_backend: adding backend `s9036' [20:21:31.661893] [dll] add_backend: adding backend `sceptre' [20:21:31.661905] [dll] add_backend: adding backend `sharp' [20:21:31.661917] [dll] add_backend: adding backend `sm3600' [20:21:31.661929] [dll] add_backend: adding backend `sm3840' [20:21:31.661941] [dll] add_backend: adding backend `snapscan' [20:21:31.661954] [dll] add_backend: adding backend `sp15c' [20:21:31.661966] [dll] add_backend: adding backend `tamarack' [20:21:31.661978] [dll] add_backend: adding backend `teco1' [20:21:31.661991] [dll] add_backend: adding backend `teco2' [20:21:31.662003] [dll] add_backend: adding backend `teco3' [20:21:31.662015] [dll] add_backend: adding backend `u12' [20:21:31.662027] [dll] add_backend: adding backend `umax' [20:21:31.662039] [dll] add_backend: adding backend `umax1220u' [20:21:31.662052] [dll] add_backend: adding backend `v4l' [20:21:31.662064] [dll] add_backend: adding backend `xerox_mfp' [20:21:31.662093] [dll] sane_get_devices [20:21:31.662107] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.662120] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [20:21:31.662140] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [20:21:31.662323] [dll] init: initializing backend `xerox_mfp' [20:21:31.858561] [dll] init: backend `xerox_mfp' is version 1.0.13 [20:21:31.858816] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.858854] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [20:21:31.858880] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [20:21:31.858895] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [20:21:31.858912] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory) [20:21:31.858925] [dll] load: couldn't find backend `v4l' (No such file or directory) [20:21:31.858939] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.858952] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [20:21:31.858973] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [20:21:31.859266] [dll] init: initializing backend `umax1220u' [20:21:31.867567] [dll] init: backend `umax1220u' is version 1.0.2 [20:21:31.867601] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.867614] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [20:21:31.867633] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [20:21:31.867871] [dll] init: initializing backend `umax' [20:21:31.875581] [dll] init: backend `umax' is version 1.0.45 [20:21:31.875606] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.875619] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [20:21:31.875638] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [20:21:31.875855] [dll] init: initializing backend `u12' [20:21:31.882382] [dll] init: backend `u12' is version 1.0.0 [20:21:31.882405] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.882414] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [20:21:31.882428] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [20:21:31.882536] [dll] init: initializing backend `teco3' [20:21:31.882638] [dll] init: backend `teco3' is version 1.0.1 [20:21:31.882650] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.882676] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [20:21:31.882691] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [20:21:31.882764] [dll] init: initializing backend `teco2' [20:21:31.882863] [dll] init: backend `teco2' is version 1.0.10 [20:21:31.882875] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.882883] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [20:21:31.882896] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [20:21:31.882970] [dll] init: initializing backend `teco1' [20:21:31.883061] [dll] init: backend `teco1' is version 1.0.10 [20:21:31.883074] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.883083] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [20:21:31.883096] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [20:21:31.883181] [dll] init: initializing backend `tamarack' [20:21:31.883232] [dll] init: backend `tamarack' is version 1.0.0 [20:21:31.883244] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.883252] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [20:21:31.883265] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [20:21:31.883347] [dll] init: initializing backend `sp15c' [20:21:31.883396] [dll] init: backend `sp15c' is version 1.0.0 [20:21:31.883407] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.883415] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [20:21:31.883429] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [20:21:31.883561] [dll] init: initializing backend `snapscan' [20:21:31.890218] [dll] init: backend `snapscan' is version 1.4.53 [20:21:31.890239] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.890248] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [20:21:31.890262] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [20:21:31.890405] [dll] init: initializing backend `sm3840' [20:21:31.896604] [dll] init: backend `sm3840' is version 1.0.0 [20:21:31.896626] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.896635] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [20:21:31.896650] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [20:21:31.896808] [dll] init: initializing backend `sm3600' [20:21:31.903056] [dll] init: backend `sm3600' is version 1.0.6 [20:21:31.903075] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.903084] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [20:21:31.903099] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [20:21:31.903237] [dll] init: initializing backend `sharp' [20:21:31.903315] [dll] init: backend `sharp' is version 1.0.0 [20:21:31.903327] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.903335] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [20:21:31.903349] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [20:21:31.903426] [dll] init: initializing backend `sceptre' [20:21:31.903491] [dll] init: backend `sceptre' is version 1.0.10 [20:21:31.903504] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.903513] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [20:21:31.903526] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [20:21:31.903599] [dll] init: initializing backend `s9036' [20:21:31.903660] [dll] init: backend `s9036' is version 1.0.0 [20:21:31.903670] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.903679] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [20:21:31.903691] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [20:21:31.903836] [dll] init: initializing backend `rts8891' [20:21:31.910331] [dll] init: backend `rts8891' is version 1.0.2401 [20:21:31.910422] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.910434] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [20:21:31.910449] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [20:21:31.910602] [dll] init: initializing backend `ricoh2' [20:21:31.916972] [dll] init: backend `ricoh2' is version 1.0.0 [20:21:31.916990] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.916999] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [20:21:31.917014] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [20:21:31.917142] [dll] init: initializing backend `ricoh' [20:21:31.917193] [dll] init: backend `ricoh' is version 1.0.0 [20:21:31.917204] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.917212] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [20:21:31.917226] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [20:21:31.917318] [dll] init: initializing backend `qcam' [20:21:31.917352] [dll] init: backend `qcam' is version 1.0.0 [20:21:31.917362] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.917370] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [20:21:31.917383] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [20:21:31.917522] [dll] init: initializing backend `plustek' [20:21:31.924362] [dll] init: backend `plustek' is version 1.0.0 [20:21:31.924384] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:31.924393] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [20:21:31.924407] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [20:21:31.924623] [dll] init: initializing backend `pixma' [20:21:31.930930] [dll] init: backend `pixma' is version 1.0.27 [20:21:32.452673] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.452776] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [20:21:32.452816] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [20:21:32.452838] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1' [20:21:32.452864] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory) [20:21:32.452883] [dll] load: couldn't find backend `pint' (No such file or directory) [20:21:32.452898] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.452912] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [20:21:32.452940] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [20:21:32.453302] [dll] init: initializing backend `pieusb' [20:21:32.462039] [dll] init: backend `pieusb' is version 1.0.1 [20:21:32.462072] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.462085] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [20:21:32.462105] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [20:21:32.462280] [dll] init: initializing backend `pie' [20:21:32.462371] [dll] init: backend `pie' is version 1.0.9 [20:21:32.462387] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.462415] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [20:21:32.462434] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [20:21:32.462606] [dll] init: initializing backend `niash' [20:21:32.470036] [dll] init: backend `niash' is version 1.0.1 [20:21:32.470061] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.470074] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [20:21:32.470093] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [20:21:32.470249] [dll] init: initializing backend `nec' [20:21:32.470314] [dll] init: backend `nec' is version 1.0.0 [20:21:32.470329] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.470341] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [20:21:32.470358] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [20:21:32.470514] [dll] init: initializing backend `mustek_usb2' [20:21:32.470541] [dll] init: backend `mustek_usb2' is version 1.0.10 [20:21:32.477291] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.477311] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [20:21:32.477326] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [20:21:32.477490] [dll] init: initializing backend `mustek_usb' [20:21:32.484196] [dll] init: backend `mustek_usb' is version 1.0.18 [20:21:32.484215] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.484225] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [20:21:32.484239] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [20:21:32.484452] [dll] init: initializing backend `mustek' [20:21:32.484630] [dll] init: backend `mustek' is version 1.0.138 [20:21:32.484643] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.484652] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [20:21:32.484667] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [20:21:32.484754] [dll] init: initializing backend `microtek2' [20:21:32.484819] [dll] init: backend `microtek2' is version 1.0.0 [20:21:32.484833] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.484841] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [20:21:32.484855] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [20:21:32.484937] [dll] init: initializing backend `microtek' [20:21:32.484993] [dll] init: backend `microtek' is version 1.0.0 [20:21:32.485004] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.485013] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [20:21:32.485025] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [20:21:32.485102] [dll] init: initializing backend `matsushita' [20:21:32.485192] [dll] init: backend `matsushita' is version 1.0.7 [20:21:32.485205] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:32.485213] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [20:21:32.485227] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [20:21:32.486063] [dll] init: initializing backend `magicolor' [20:21:32.492514] [dll] init: backend `magicolor' is version 1.0.1 [20:21:33.995025] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:33.995123] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [20:21:33.995169] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [20:21:33.995566] [dll] init: initializing backend `ma1509' [20:21:34.004399] [dll] init: backend `ma1509' is version 1.0.3 [20:21:34.004432] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:34.004452] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [20:21:34.004481] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [20:21:34.004732] [dll] init: initializing backend `lexmark' [20:21:34.011079] [dll] init: backend `lexmark' is version 1.0.32 [20:21:34.011167] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:34.011179] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [20:21:34.011193] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [20:21:34.011303] [dll] init: initializing backend `leo' [20:21:34.011392] [dll] init: backend `leo' is version 1.0.11 [20:21:34.011405] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:34.011414] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [20:21:34.011427] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [20:21:34.011558] [dll] init: initializing backend `kvs40xx' [20:21:34.017950] [dll] init: backend `kvs40xx' is version 1.0.1 [20:21:34.017998] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:34.018008] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [20:21:34.018023] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [20:21:34.018196] [dll] init: initializing backend `kvs20xx' [20:21:34.024528] [dll] init: backend `kvs20xx' is version 1.0.2 [20:21:34.024591] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:34.024601] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [20:21:34.024615] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [20:21:34.024756] [dll] init: initializing backend `kvs1025' [20:21:34.031195] [dll] init: backend `kvs1025' is version 1.0.5 [20:21:34.031220] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:34.031230] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [20:21:34.031245] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [20:21:34.032250] [dll] init: initializing backend `kodakaio' [20:21:34.038701] [dll] init: backend `kodakaio' is version 1.0.3 [20:21:35.953423] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.953528] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [20:21:35.953576] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [20:21:35.953891] [dll] init: initializing backend `kodak' [20:21:35.953932] [dll] init: backend `kodak' is version 1.0.7 [20:21:35.954016] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.954042] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [20:21:35.954065] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [20:21:35.954236] [dll] init: initializing backend `ibm' [20:21:35.954318] [dll] init: backend `ibm' is version 1.0.0 [20:21:35.954337] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.954351] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [20:21:35.954372] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [20:21:35.954505] [dll] init: initializing backend `hs2p' [20:21:35.954589] [dll] init: backend `hs2p' is version 1.0.0 [20:21:35.954608] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.954641] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [20:21:35.954663] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [20:21:35.954806] [dll] init: initializing backend `hpsj5s' [20:21:35.954870] [dll] init: backend `hpsj5s' is version 1.0.3 [20:21:35.954888] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.954902] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [20:21:35.954922] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [20:21:35.955120] [dll] init: initializing backend `hpljm1005' [20:21:35.964738] [dll] init: backend `hpljm1005' is version 1.0.1 [20:21:35.964770] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.964781] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [20:21:35.964800] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [20:21:35.965009] [dll] init: initializing backend `hp5590' [20:21:35.971256] [dll] init: backend `hp5590' is version 1.0.8 [20:21:35.971275] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.971283] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [20:21:35.971298] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [20:21:35.971462] [dll] init: initializing backend `hp5400' [20:21:35.977944] [dll] init: backend `hp5400' is version 1.0.3 [20:21:35.977968] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.977977] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [20:21:35.977991] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [20:21:35.978166] [dll] init: initializing backend `hp4200' [20:21:35.984824] [dll] init: backend `hp4200' is version 1.0.0 [20:21:35.984856] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.984865] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [20:21:35.984880] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [20:21:35.985479] [dll] init: initializing backend `hp3900' [20:21:35.992125] [dll] init: backend `hp3900' is version 1.0.0 [20:21:35.992153] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.992162] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [20:21:35.992177] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [20:21:35.992394] [dll] init: initializing backend `hp3500' [20:21:35.998792] [dll] init: backend `hp3500' is version 1.0.0 [20:21:35.998818] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:35.998827] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [20:21:35.998843] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [20:21:35.999064] [dll] init: initializing backend `hp' [20:21:35.999088] [dll] init: backend `hp' is version 1.0.8 [20:21:36.005860] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:36.005885] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [20:21:36.005902] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [20:21:36.006131] [dll] init: initializing backend `gt68xx' [20:21:36.012574] [dll] init: backend `gt68xx' is version 1.0.84 [20:21:36.012715] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:36.012728] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [20:21:36.012743] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [20:21:36.013352] [dll] init: initializing backend `genesys' [20:21:36.020514] [dll] init: backend `genesys' is version 1.0.0 [20:21:36.020646] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:36.020660] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [20:21:36.020674] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [20:21:36.020911] [dll] init: initializing backend `fujitsu' [20:21:36.020939] [dll] init: backend `fujitsu' is version 1.0.134 [20:21:36.027488] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:36.027506] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [20:21:36.027519] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [20:21:36.034247] [dll] init: initializing backend `escl' [20:21:36.034398] [dll] init: backend `escl' is version 1.0.0 [20:21:37.039046] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:37.039141] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [20:21:37.039183] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [20:21:37.039616] [dll] init: initializing backend `epsonds' [20:21:37.048404] [dll] init: backend `epsonds' is version 1.0.0 [20:21:38.049713] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:38.049802] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [20:21:38.049837] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [20:21:38.050264] [dll] init: initializing backend `epson2' [20:21:38.058416] [dll] init: backend `epson2' is version 1.0.124 [20:21:39.059713] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.059822] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [20:21:39.059859] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [20:21:39.060334] [dll] init: initializing backend `epjitsu' [20:21:39.060376] [dll] init: backend `epjitsu' is version 1.0.31 [20:21:39.069245] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.069288] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [20:21:39.069321] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [20:21:39.069553] [dll] init: initializing backend `dmc' [20:21:39.069640] [dll] init: backend `dmc' is version 1.0.0 [20:21:39.069659] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.069674] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [20:21:39.069695] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [20:21:39.069899] [dll] init: initializing backend `dell1600n_net' [20:21:39.069923] [dll] init: backend `dell1600n_net' is version 1.0.0 [20:21:39.371140] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.371250] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [20:21:39.371291] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [20:21:39.371675] [dll] init: initializing backend `coolscan3' [20:21:39.380910] [dll] init: backend `coolscan3' is version 1.0.0 [20:21:39.381000] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.381012] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [20:21:39.381027] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [20:21:39.381297] [dll] init: initializing backend `coolscan' [20:21:39.381362] [dll] init: backend `coolscan' is version 1.0.0 [20:21:39.381374] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.381382] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [20:21:39.381413] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [20:21:39.381533] [dll] init: initializing backend `cardscan' [20:21:39.387853] [dll] init: backend `cardscan' is version 1.0.3 [20:21:39.387915] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.387926] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [20:21:39.387940] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [20:21:39.388109] [dll] init: initializing backend `canon_dr' [20:21:39.388129] [dll] init: backend `canon_dr' is version 1.0.58 [20:21:39.394501] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.394521] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [20:21:39.394536] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [20:21:39.394695] [dll] init: initializing backend `canon630u' [20:21:39.401250] [dll] init: backend `canon630u' is version 1.0.1 [20:21:39.401275] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.401284] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [20:21:39.401299] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [20:21:39.401461] [dll] init: initializing backend `canon' [20:21:39.401519] [dll] init: backend `canon' is version 1.0.0 [20:21:39.401530] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.401539] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [20:21:39.401551] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [20:21:39.401638] [dll] init: initializing backend `bh' [20:21:39.401696] [dll] init: backend `bh' is version 1.0.4 [20:21:39.401708] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.401717] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [20:21:39.401729] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [20:21:39.401877] [dll] init: initializing backend `avision' [20:21:39.408524] [dll] init: backend `avision' is version 1.0.297 [20:21:39.408888] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.408901] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [20:21:39.408926] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [20:21:39.409048] [dll] init: initializing backend `as6e' [20:21:39.409109] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.409119] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [20:21:39.409134] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [20:21:39.409271] [dll] init: initializing backend `artec_eplus48u' [20:21:39.415818] [dll] init: backend `artec_eplus48u' is version 1.0.0 [20:21:39.415847] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.415857] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [20:21:39.415871] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [20:21:39.416038] [dll] init: initializing backend `artec' [20:21:39.416111] [dll] init: backend `artec' is version 1.0.0 [20:21:39.416123] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.416131] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [20:21:39.416145] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [20:21:39.416233] [dll] init: initializing backend `apple' [20:21:39.416287] [dll] init: backend `apple' is version 1.0.0 [20:21:39.416299] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.416323] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [20:21:39.416337] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [20:21:39.416444] [dll] init: initializing backend `agfafocus' [20:21:39.416494] [dll] init: backend `agfafocus' is version 1.0.0 [20:21:39.416504] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.416513] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [20:21:39.416526] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [20:21:39.416609] [dll] init: initializing backend `abaton' [20:21:39.416661] [dll] init: backend `abaton' is version 1.0.0 [20:21:39.416672] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.416681] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [20:21:39.416693] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [20:21:39.416844] [dll] init: initializing backend `net' [20:21:39.421156] [dll] init: backend `net' is version 1.0.29 [20:21:39.421231] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [20:21:39.421251] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [20:21:39.421289] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [20:21:39.422845] [dll] init: initializing backend `hpaio' [20:21:39.423945] [dll] init: backend `hpaio' is version 1.0.0 [20:21:40.824118] [dll] sane_get_devices: found 2 devices [20:21:40.824244] [dll] sane_exit: exiting [20:21:40.824270] [dll] sane_exit: calling backend `xerox_mfp's exit function [20:21:40.824559] [dll] sane_exit: calling backend `umax1220u's exit function [20:21:40.824658] [dll] sane_exit: calling backend `umax's exit function [20:21:40.824732] [dll] sane_exit: calling backend `u12's exit function [20:21:40.824802] [dll] sane_exit: calling backend `teco3's exit function [20:21:40.824865] [dll] sane_exit: calling backend `teco2's exit function [20:21:40.824924] [dll] sane_exit: calling backend `teco1's exit function [20:21:40.824980] [dll] sane_exit: calling backend `tamarack's exit function [20:21:40.825035] [dll] sane_exit: calling backend `sp15c's exit function [20:21:40.825091] [dll] sane_exit: calling backend `snapscan's exit function [20:21:40.825152] [dll] sane_exit: calling backend `sm3840's exit function [20:21:40.825214] [dll] sane_exit: calling backend `sm3600's exit function [20:21:40.825278] [dll] sane_exit: calling backend `sharp's exit function [20:21:40.825359] [dll] sane_exit: calling backend `sceptre's exit function [20:21:40.825438] [dll] sane_exit: calling backend `s9036's exit function [20:21:40.825523] [dll] sane_exit: calling backend `rts8891's exit function [20:21:40.825599] [dll] sane_exit: calling backend `ricoh2's exit function [20:21:40.825709] [dll] sane_exit: calling backend `ricoh's exit function [20:21:40.825789] [dll] sane_exit: calling backend `qcam's exit function [20:21:40.825847] [dll] sane_exit: calling backend `plustek's exit function [20:21:40.825909] [dll] sane_exit: calling backend `pixma's exit function [20:21:40.825971] [dll] sane_exit: calling backend `pieusb's exit function [20:21:40.826029] [dll] sane_exit: calling backend `pie's exit function [20:21:40.826085] [dll] sane_exit: calling backend `niash's exit function [20:21:40.826151] [dll] sane_exit: calling backend `nec's exit function [20:21:40.826206] [dll] sane_exit: calling backend `mustek_usb2's exit function [20:21:40.826270] [dll] sane_exit: calling backend `mustek_usb's exit function [20:21:40.826329] [dll] sane_exit: calling backend `mustek's exit function [20:21:40.826387] [dll] sane_exit: calling backend `microtek2's exit function [20:21:40.826443] [dll] sane_exit: calling backend `microtek's exit function [20:21:40.826515] [dll] sane_exit: calling backend `matsushita's exit function [20:21:40.826574] [dll] sane_exit: calling backend `magicolor's exit function [20:21:40.826670] [dll] sane_exit: calling backend `ma1509's exit function [20:21:40.826753] [dll] sane_exit: calling backend `lexmark's exit function [20:21:40.826870] [dll] sane_exit: calling backend `leo's exit function [20:21:40.826933] [dll] sane_exit: calling backend `kvs40xx's exit function [20:21:40.826992] [dll] sane_exit: calling backend `kvs20xx's exit function [20:21:40.827115] [dll] sane_exit: calling backend `kvs1025's exit function [20:21:40.827174] [dll] sane_exit: calling backend `kodakaio's exit function [20:21:40.827236] [dll] sane_exit: calling backend `kodak's exit function [20:21:40.827293] [dll] sane_exit: calling backend `ibm's exit function [20:21:40.827342] [dll] sane_exit: calling backend `hs2p's exit function [20:21:40.827394] [dll] sane_exit: calling backend `hpsj5s's exit function [20:21:40.827472] [dll] sane_exit: calling backend `hpljm1005's exit function [20:21:40.827529] [dll] sane_exit: calling backend `hp5590's exit function [20:21:40.827584] [dll] sane_exit: calling backend `hp5400's exit function [20:21:40.827640] [dll] sane_exit: calling backend `hp4200's exit function [20:21:40.827695] [dll] sane_exit: calling backend `hp3900's exit function [20:21:40.827771] [dll] sane_exit: calling backend `hp3500's exit function [20:21:40.827832] [dll] sane_exit: calling backend `hp's exit function [20:21:40.827890] [dll] sane_exit: calling backend `gt68xx's exit function [20:21:40.827986] [dll] sane_exit: calling backend `genesys's exit function device `escl:http://127.0.0.1:60000' is a ESCL Deskjet 2540 series [CN3B22DG3N0604] flatbed scanner device `hpaio:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604' is a Hewlett-Packard Deskjet_2540_series all-in-one [20:21:40.828251] [dll] sane_exit: calling backend `fujitsu's exit function [20:21:40.828315] [dll] sane_exit: calling backend `escl's exit function [20:21:40.828854] [dll] sane_exit: calling backend `epsonds's exit function [20:21:40.828913] [dll] sane_exit: calling backend `epson2's exit function [20:21:40.828976] [dll] sane_exit: calling backend `epjitsu's exit function [20:21:40.829027] [dll] sane_exit: calling backend `dmc's exit function [20:21:40.829071] [dll] sane_exit: calling backend `dell1600n_net's exit function [20:21:40.829192] [dll] sane_exit: calling backend `coolscan3's exit function [20:21:40.829243] [dll] sane_exit: calling backend `coolscan's exit function [20:21:40.829289] [dll] sane_exit: calling backend `cardscan's exit function [20:21:40.829334] [dll] sane_exit: calling backend `canon_dr's exit function [20:21:40.829379] [dll] sane_exit: calling backend `canon630u's exit function [20:21:40.829423] [dll] sane_exit: calling backend `canon's exit function [20:21:40.829463] [dll] sane_exit: calling backend `bh's exit function [20:21:40.829503] [dll] sane_exit: calling backend `avision's exit function [20:21:40.829566] [dll] sane_exit: calling backend `artec_eplus48u's exit function [20:21:40.829617] [dll] sane_exit: calling backend `artec's exit function [20:21:40.829660] [dll] sane_exit: calling backend `apple's exit function [20:21:40.829699] [dll] sane_exit: calling backend `agfafocus's exit function [20:21:40.829736] [dll] sane_exit: calling backend `abaton's exit function [20:21:40.829772] [dll] sane_exit: calling backend `net's exit function [20:21:40.830629] [dll] sane_exit: calling backend `hpaio's exit function [20:21:40.831436] [dll] sane_exit: finished
$ dpkg -l *sane* | grep ii ii libsane:amd64 1.0.29-0ubuntu5 amd64 API library for scanners ii libsane-common 1.0.29-0ubuntu5 all API library for scanners -- documentation and support files ii libsane-hpaio:amd64 3.20.3+dfsg0-2 amd64 HP SANE backend for multi-function peripherals ii sane-utils 1.0.29-0ubuntu5 amd64 API library for scanners -- utilities
$ dpkg -l libusb* | grep ii ii libusb-1.0-0:amd64 2:1.0.23-2build1 amd64 userspace USB programming library ii libusbmuxd6:amd64 2.0.1-2 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
$ dpkg -l | egrep hp ii hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP) ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data files ii hplip-gui 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - GUI utilities (Qt-based) ii libhpmud0:amd64 3.20.3+dfsg0-2 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries ii libsane-hpaio:amd64 3.20.3+dfsg0-2 amd64 HP SANE backend for multi-function peripherals ii printer-driver-hpcups 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii printer-driver-postscript-hp 3.20.3+dfsg0-2 amd64 HP Printers PostScript Descriptions ii python3-launchpadlib 1.10.13-1 all Launchpad web services client library (Python 3)
$ sudo updatedb && locate libsane-smfp.so sudo: updatedb: Befehl nicht gefunden
$ systemctl --no-pager status sane*
$ hp-info -i HP Linux Imaging and Printing System (ver. 3.20.3) Device Information Utility ver. 5.2 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 error: Device busy: hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 error: Error opening device (Device not found). Device Parameters (dynamic data): Parameter Value(s) ---------------------------- ---------------------------------------------------------- back-end hp cups-printers ['Deskjet-2540'] cups-uri hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 dev-file device-state -1 device-uri hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 deviceid error-state 101 host is-hp True panel 0 panel-line1 panel-line2 port 1 scan-uri hpaio:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 serial CN3B22DG3N0604 status-code 5002 status-desc Model Parameters (static data): Parameter Value(s) ---------------------------- ---------------------------------------------------------- align-type 15 clean-type 4 color-cal-type 0 copy-type 0 embedded-server-type 1 family-class ['Pyramid'] fax-type 0 fw-download False icon default_printer.png io-mfp-mode 1 io-mode 1 io-support 10 job-storage 0 linefeed-cal-type 0 model Deskjet_2540_series model-ui HP Deskjet 2540 Series model1 HP Deskjet 2540 All-in-One Printer model10 HP Deskjet Ink Advantage 2546 All-in-One Printer model11 HP Deskjet Ink Advantage 2548 All-in-One Printer model12 HP Deskjet 2546B All-in-One Printer model13 HP Deskjet 2546P All-in-One Printer model14 HP Deskjet 2546R All-in-One Printer model2 HP Deskjet 2541 All-in-One Printer model3 HP Deskjet 2542 All-in-One Printer model4 HP Deskjet 2543 All-in-One Printer model5 HP Deskjet 2544 All-in-One Printer model6 HP Deskjet 2545 All-in-One Printer model7 HP Deskjet 2549 All-in-One Printer model8 HP Deskjet Ink Advantage 2540 All-in-One Printer Series model9 HP Deskjet Ink Advantage 2545 All-in-One Printer monitor-type 0 panel-check-type 0 pcard-type 0 plugin 0 plugin-reason 0 power-settings 0 pq-diag-type 0 r-type 0 scan-src 1 scan-type 7 status-battery-check 0 status-dynamic-counters 0 status-type 10 support-released True support-subtype 17166 support-type 2 support-ver 3.13.8 tech-class ['Pyramid'] tech-subclass ['K10'] tech-type 2 usb-pid 49681 usb-vid 1008 wifi-config 3 Status History (most recent first): Date/Time Code Status Description User Job ID -------------------- ----- ---------------------------------------- -------- -------- 06/03/20 20:25:56 5021 Device is busy uta 0 06/03/20 20:17:07 5012 Device communication error uta 2 06/03/20 20:16:37 5021 Device is busy uta 2 06/03/20 20:12:37 5012 Device communication error uta 2 Done.
Drucker
$ dpkg -l *cups* lpr* | grep ii ii bluez-cups 5.53-0ubuntu3 amd64 Bluetooth printer driver for CUPS ii cups 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface ii cups-browsed 1.27.4-1 amd64 OpenPrinting CUPS Filters - cups-browsed ii cups-bsd 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - BSD commands ii cups-client 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - client programs (SysV) ii cups-common 2.3.1-9ubuntu1.1 all Common UNIX Printing System(tm) - common files ii cups-core-drivers 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - driverless printing ii cups-daemon 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - daemon ii cups-filters 1.27.4-1 amd64 OpenPrinting CUPS Filters - Main Package ii cups-filters-core-drivers 1.27.4-1 amd64 OpenPrinting CUPS Filters - Driverless printing ii cups-ipp-utils 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - IPP developer/admin utilities ii cups-pk-helper 0.2.6-1ubuntu3 amd64 PolicyKit helper to configure cups with fine-grained privileges ii cups-ppdc 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - PPD manipulation utilities ii cups-server-common 2.3.1-9ubuntu1.1 all Common UNIX Printing System(tm) - server common files ii libcups2:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Core library ii libcups2-dev:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Development files CUPS library ii libcupsfilters-dev:amd64 1.27.4-1 amd64 OpenPrinting CUPS Filters - Development files for the library ii libcupsfilters1:amd64 1.27.4-1 amd64 OpenPrinting CUPS Filters - Shared library ii libcupsimage2:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Raster image library ii libcupsimage2-dev:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Development files CUPS image library ii printer-driver-hpcups 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii python3-cups 1.9.73-3build1 amd64 Python3 bindings for CUPS ii python3-cupshelpers 1.5.12-0ubuntu1 all Python utility modules around the CUPS printing system
$ systemctl --no-pager status cups*
● cups.path - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
Active: active (waiting) since Wed 2020-06-03 20:09:36 CEST; 19min ago
Triggers: ● cups.service
Jun 03 20:09:36 uta-ZenBook-UX431DA-UM431DA systemd[1]: Started CUPS Scheduler.
● cups.service - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2020-06-03 20:09:36 CEST; 19min ago
TriggeredBy: ● cups.path
● cups.socket
Docs: man:cupsd(8)
Main PID: 687 (cupsd)
Tasks: 3 (limit: 6987)
Memory: 47.6M
CGroup: /system.slice/cups.service
├─ 687 /usr/sbin/cupsd -l
├─ 879 /usr/lib/cups/notifier/dbus dbus://
└─3162 /usr/lib/cups/notifier/dbus dbus://
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 427: Found interface conf=…dex=3
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 389: Active kernel driver …ret=0
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 515: invalid claim_interfa… busy
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 427: Found interface conf=…dex=9
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 389: Active kernel driver …ret=0
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 515: invalid claim_interfa… busy
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 427: Found interface conf=…ex=11
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 389: Active kernel driver …ret=0
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: io/hpmud/musb.c 515: invalid claim_interfa… busy
Jun 03 20:20:38 uta-ZenBook-UX431DA-UM431DA hp[860]: prnt/backend/hp.c 825: INFO: open device f…ds...
● cups-browsed.service - Make remote CUPS printers available locally
Loaded: loaded (/lib/systemd/system/cups-browsed.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2020-06-03 20:09:36 CEST; 19min ago
Main PID: 770 (cups-browsed)
Tasks: 3 (limit: 6987)
Memory: 7.0M
CGroup: /system.slice/cups-browsed.service
└─770 /usr/sbin/cups-browsed
Jun 03 20:09:36 uta-ZenBook-UX431DA-UM431DA systemd[1]: Started Make remote CUPS printers availa…lly.
● cups.socket - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
Active: active (running) since Wed 2020-06-03 20:09:36 CEST; 19min ago
Triggers: ● cups.service
Listen: /run/cups/cups.sock (Stream)
Tasks: 0 (limit: 6987)
Memory: 0B
CGroup: /system.slice/cups.socket
Jun 03 20:09:36 uta-ZenBook-UX431DA-UM431DA systemd[1]: Listening on CUPS Scheduler.
Hint: Some lines were ellipsized, use -l to show in full.$ lpstat -t Zeitplandienst läuft systemvoreingestelltes Ziel: Deskjet-2540 Gerät für Deskjet-2540: hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 Gerät für Deskjet_2540_series_CN3B22DG3N0604_: implicitclass://Deskjet_2540_series_CN3B22DG3N0604_/ Deskjet-2540 akzeptiert Anfragen seit Mi 03 Jun 2020 20:20:49 CEST Deskjet_2540_series_CN3B22DG3N0604_ akzeptiert Anfragen seit Mi 03 Jun 2020 20:17:10 CEST Drucker Deskjet-2540 ist im Leerlauf. Aktiviert seit Mi 03 Jun 2020 20:20:49 CEST Drucker Deskjet_2540_series_CN3B22DG3N0604_ ist im Leerlauf. Aktiviert seit Mi 03 Jun 2020 20:17:10 CEST
$ lpinfo -v network beh network https network ipp file cups-brf:/ direct hp:/usb/Deskjet_2540_series?serial=CN3B22DG3N0604 network lpd network socket network ipps network http direct hpfax network ipp://Deskjet%202540%20series%20%5BCN3B22DG3N0604%5D._ipp._tcp.local/
$ uname -rm 5.4.0-29-generic x86_64
$ lsusb Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 005: ID 04f3:0903 Elan Microelectronics Corp. Bus 003 Device 004: ID 8087:0a2b Intel Corp. USB2.0 Hub Bus 003 Device 003: ID 13d3:56dd IMC Networks Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 03f0:c211 HP, Inc Deskjet 2540 series Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ id uid=1000(uta) gid=1000(uta) Gruppen=1000(uta),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),120(lpadmin),131(lxd),132(sambashare)
$ ls -l /etc/cups/ppd/* -rw-r----- 1 root lp 17500 Mai 29 21:08 /etc/cups/ppd/Deskjet-2540.ppd -rw-r----- 1 root lp 10474 Jun 3 20:17 /etc/cups/ppd/Deskjet_2540_series_CN3B22DG3N0604_.ppd
Auf einem anderen Rechner mit Win10 läuft der Drucker anstandslos. Kann mir jemand weiterhelfen?
