okay.... powernowd war noch drauf hab ich jetz runtergeschmissen...
hier die komplette dmesg
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000004ffd0000 - 000000004ffdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004ffdf000 - 0000000050000000 (ACPI NVS)
[ 0.000000] 383MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 327632) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 327632
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 327632
[ 0.000000] On node 0 totalpages: 327632
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 767 pages used for memmap
[ 0.000000] HighMem zone: 97489 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F64A0 checksum 0
[ 0.000000] ACPI: RSDP 000F64A0, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 4FFD0100, 0034 (r1 A M I OEMXSDT 12000429 MSFT 97)
[ 0.000000] ACPI: FACP 4FFD0290, 00F4 (r3 A M I OEMFACP 12000429 MSFT 97)
[ 0.000000] ACPI: DSDT 4FFD03F0, 3B45 (r1 UW___ F08_____ 0 INTL 2002026)
[ 0.000000] ACPI: FACS 4FFDF000, 0040
[ 0.000000] ACPI: OEMB 4FFDF040, 01BC (r1 A M I AMI_OEM 12000429 MSFT 97)
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:b0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325073
[ 0.000000] Kernel command line: root=UUID=5ed08729-cd26-45bc-9604-2841d6aa8b3d ro quiet splash
[ 0.000000] Found and enabled local APIC!
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 600.045 MHz processor.
[ 22.471856] Console: colour VGA+ 80x25
[ 22.471865] console [tty0] enabled
[ 22.472564] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 22.473608] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 22.603940] Memory: 1286836k/1310528k available (2157k kernel code, 22436k reserved, 998k data, 364k init, 393024k highmem)
[ 22.603962] virtual kernel memory layout:
[ 22.603966] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 22.603969] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 22.603973] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 22.603977] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 22.603980] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 22.603984] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 22.603987] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 22.603997] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 22.604092] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 22.684102] Calibrating delay using timer specific routine.. 1201.39 BogoMIPS (lpj=2402788)
[ 22.684167] Security Framework initialized
[ 22.684183] SELinux: Disabled at boot.
[ 22.684221] AppArmor: AppArmor initialized
[ 22.684232] Failure registering capabilities with primary security module.
[ 22.684253] Mount-cache hash table entries: 512
[ 22.684564] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
[ 22.684597] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.684604] CPU: L2 cache: 2048K
[ 22.684612] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
[ 22.684637] Compat vDSO mapped to ffffe000.
[ 22.684664] Checking 'hlt' instruction... OK.
[ 22.700921] SMP alternatives: switching to UP code
[ 22.705473] Freeing SMP alternatives: 11k freed
[ 22.705742] Early unpacking initramfs... done
[ 23.714412] ACPI: Core revision 20070126
[ 23.714536] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 23.719551] ACPI: setting ELCR to 0200 (from 0a00)
[ 23.719964] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
[ 23.719976] SMP motherboard not detected.
[ 23.827864] Brought up 1 CPUs
[ 23.827900] CPU0 attaching sched-domain:
[ 23.827907] domain 0: span 01
[ 23.827912] groups: 01
[ 23.828282] net_namespace: 64 bytes
[ 23.828303] Booting paravirtualized kernel on bare hardware
[ 23.829550] Time: 7:27:13 Date: 04/23/08
[ 23.829603] NET: Registered protocol family 16
[ 23.830087] EISA bus registered
[ 23.830120] ACPI: bus type pci registered
[ 23.831826] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 23.831833] PCI: Using configuration type 1
[ 23.831837] Setting up standard PCI resources
[ 23.848127] ACPI: EC: Look up EC in DSDT
[ 23.854347] ACPI: Interpreter enabled
[ 23.854355] ACPI: (supports S0 S3 S4 S5)
[ 23.854392] ACPI: Using PIC for interrupt routing
[ 23.865220] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 23.873528] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 23.873536] ACPI: EC: driver started in interrupt mode
[ 23.873766] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.874350] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 23.874359] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[ 23.875270] PCI: Transparent bridge - 0000:00:1e.0
[ 23.875483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.875820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 23.936263] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 9 *11 12 14 15)
[ 23.936676] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 *9 11 12 14 15)
[ 23.937081] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 9 *11 12 14 15)
[ 23.937484] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *11 12 14 15)
[ 23.937885] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 23.938301] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 23.938709] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 23.939117] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *11 12 14 15)
[ 23.939473] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 3A, should be 31 [20070126]
[ 23.939490] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.939568] pnp: PnP ACPI init
[ 23.939586] ACPI: bus type pnp registered
[ 23.946751] pnp: PnP ACPI: found 11 devices
[ 23.946758] ACPI: ACPI bus type pnp unregistered
[ 23.946767] PnPBIOS: Disabled by ACPI PNP
[ 23.947318] PCI: Using ACPI for IRQ routing
[ 23.947326] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.967749] NET: Registered protocol family 8
[ 23.967755] NET: Registered protocol family 20
[ 23.967893] AppArmor: AppArmor Filesystem Enabled
[ 23.971732] Time: tsc clocksource has been installed.
[ 23.979827] system 00:07: ioport range 0x600-0x60f has been reserved
[ 23.979836] system 00:07: ioport range 0x640-0x64f has been reserved
[ 23.979850] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 23.979858] system 00:08: ioport range 0x400-0x47f has been reserved
[ 23.979866] system 00:08: ioport range 0x500-0x53f has been reserved
[ 23.979874] system 00:08: ioport range 0x860-0x860 has been reserved
[ 23.979882] system 00:08: ioport range 0x862-0x862 has been reserved
[ 23.979890] system 00:08: ioport range 0x864-0x864 has been reserved
[ 23.979897] system 00:08: ioport range 0x866-0x866 has been reserved
[ 23.979905] system 00:08: ioport range 0x868-0x868 has been reserved
[ 23.979913] system 00:08: ioport range 0x86c-0x86c has been reserved
[ 23.979922] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 23.979931] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 23.979946] system 00:09: ioport range 0x1100-0x113f has been reserved
[ 23.979954] system 00:09: ioport range 0x1254-0x1254 has been reserved
[ 23.979962] system 00:09: ioport range 0x12d4-0x12d4 has been reserved
[ 23.979970] system 00:09: ioport range 0x1300-0x1375 has been reserved
[ 23.979978] system 00:09: ioport range 0x1377-0x137f has been reserved
[ 23.979987] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 23.979995] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 23.980011] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 23.980019] system 00:0a: iomem range 0x0-0x0 could not be reserved
[ 23.980028] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 23.980036] system 00:0a: iomem range 0x100000-0x4fffffff could not be reserved
[ 23.980045] system 00:0a: iomem range 0x0-0x0 could not be reserved
[ 24.011063] PCI: Bridge: 0000:00:01.0
[ 24.011070] IO window: 9000-bfff
[ 24.011078] MEM window: ffc00000-ffcfffff
[ 24.011084] PREFETCH window: ceb00000-deafffff
[ 24.011113] PCI: Bus 3, cardbus bridge: 0000:02:0b.0
[ 24.011119] IO window: 0000c000-0000c0ff
[ 24.011127] IO window: 0000c400-0000c4ff
[ 24.011134] PREFETCH window: 64000000-67ffffff
[ 24.011142] MEM window: 68000000-6bffffff
[ 24.011150] PCI: Bus 7, cardbus bridge: 0000:02:0b.1
[ 24.011155] IO window: 0000cc00-0000ccff
[ 24.011162] IO window: 00001000-000010ff
[ 24.011169] PREFETCH window: 6c000000-6fffffff
[ 24.011177] MEM window: 70000000-73ffffff
[ 24.011184] PCI: Bridge: 0000:00:1e.0
[ 24.011190] IO window: c000-cfff
[ 24.011199] MEM window: ffd00000-ffdfffff
[ 24.011205] PREFETCH window: disabled.
[ 24.011228] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.011247] PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
[ 24.011791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 24.011798] PCI: setting IRQ 11 as level-triggered
[ 24.011805] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 24.011836] PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
[ 24.011844] ACPI: PCI Interrupt 0000:02:0b.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 24.011859] PCI: Setting latency timer of device 0000:02:0b.1 to 64
[ 24.011884] NET: Registered protocol family 2
[ 24.051848] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.052426] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.054424] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.055425] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.055432] TCP reno registered
[ 24.064014] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 25.017165] it is
[ 26.040001] Freeing initrd memory: 7282k freed
[ 26.041182] audit: initializing netlink socket (disabled)
[ 26.041210] audit(1208935634.332:1): initialized
[ 26.041570] highmem bounce pool size: 64 pages
[ 26.046643] VFS: Disk quotas dquot_6.5.1
[ 26.046838] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.047173] io scheduler noop registered
[ 26.047179] io scheduler anticipatory registered
[ 26.047185] io scheduler deadline registered
[ 26.047215] io scheduler cfq registered (default)
[ 26.047317] Boot video device is 0000:01:00.0
[ 26.047974] isapnp: Scanning for PnP cards...
[ 26.402180] isapnp: No Plug & Play device found
[ 26.472927] Real Time Clock Driver v1.12ac
[ 26.473147] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.475201] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 26.475209] PCI: setting IRQ 9 as level-triggered
[ 26.475216] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 26.475237] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 26.476949] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.477125] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.477366] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.482001] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 26.482835] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.482846] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.482853] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.482860] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.482867] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.490926] mice: PS/2 mouse device common for all mice
[ 26.491207] EISA: Probing bus 0 at eisa.0
[ 26.491220] Cannot allocate resource for EISA slot 1
[ 26.491280] EISA: Detected 0 cards.
[ 26.491295] cpuidle: using governor ladder
[ 26.491300] cpuidle: using governor menu
[ 26.491511] NET: Registered protocol family 1
[ 26.491572] Using IPI No-Shortcut mode
[ 26.491639] registered taskstats version 1
[ 26.491874] Magic number: 4:382:471
[ 26.492008] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.492014] EDD information not available.
[ 26.492405] Freeing unused kernel memory: 364k freed
[ 26.494805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.042814] fuse init (API version 7.9)
[ 28.097146] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 28.097161] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 28.100188] ACPI: Thermal Zone [THRM] (75 C)
[ 28.954314] usbcore: registered new interface driver usbfs
[ 28.954365] usbcore: registered new interface driver hub
[ 28.977880] usbcore: registered new device driver usb
[ 29.017851] USB Universal Host Controller Interface driver v3.0
[ 29.018532] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 29.018541] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 29.018565] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 29.018574] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 29.019063] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 29.019101] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
[ 29.019407] usb usb1: configuration #1 chosen from 1 choice
[ 29.019468] hub 1-0:1.0: USB hub found
[ 29.019481] hub 1-0:1.0: 2 ports detected
[ 29.122574] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 29.122584] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 29.122607] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 29.122616] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 29.122672] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 29.122707] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e880
[ 29.122967] usb usb2: configuration #1 chosen from 1 choice
[ 29.123026] hub 2-0:1.0: USB hub found
[ 29.123039] hub 2-0:1.0: 2 ports detected
[ 29.225914] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 29.225939] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 29.225949] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 29.226027] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 29.226061] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000ec00
[ 29.226318] usb usb3: configuration #1 chosen from 1 choice
[ 29.226383] hub 3-0:1.0: USB hub found
[ 29.226396] hub 3-0:1.0: 2 ports detected
[ 29.361721] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 29.432264] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 29.432275] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 29.432303] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 29.432312] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 29.432382] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 29.436307] ehci_hcd 0000:00:1d.7: debug port 1
[ 29.436320] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 29.436337] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffeffc00
[ 29.489649] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.489913] usb usb4: configuration #1 chosen from 1 choice
[ 29.489978] hub 4-0:1.0: USB hub found
[ 29.489993] hub 4-0:1.0: 6 ports detected
[ 29.889496] usb 1-1: device not accepting address 2, error -71
[ 30.325813] SCSI subsystem initialized
[ 30.553263] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 30.675316] libata version 3.00 loaded.
[ 30.700034] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 30.700097] 8139cp 0000:02:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 30.700108] 8139cp 0000:02:0a.0: Try the "8139too" driver instead.
[ 30.722914] 8139too Fast Ethernet driver 0.9.28
[ 30.723001] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 30.723937] eth0: RealTek RTL8139 at 0xc800, 00:03:0d:24:f4:3c, IRQ 9
[ 30.723946] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 30.729464] usb 1-1: configuration #1 chosen from 1 choice
[ 30.733518] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 30.783413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[ffdff800-ffdfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 30.901158] ata_piix 0000:00:1f.1: version 2.12
[ 30.901188] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 30.901203] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 30.901276] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 30.921141] scsi0 : ata_piix
[ 30.941107] scsi1 : ata_piix
[ 30.944760] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 30.944769] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 31.105642] ata1.00: ATA-6: FUJITSU MHT2080AT, 0022, max UDMA/100
[ 31.105653] ata1.00: 156301488 sectors, multi 16: LBA
[ 31.121595] ata1.00: configured for UDMA/100
[ 31.441269] ata2.00: ATAPI: HL-DT-ST DVD-RW GCA-4080N, 0W33, max UDMA/33
[ 31.613204] ata2.00: configured for UDMA/33
[ 31.613454] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[ 31.617263] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GCA-4080N 0W33 PQ: 0 ANSI: 5
[ 32.150659] usbcore: registered new interface driver hiddev
[ 32.172871] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d002553ad52]
[ 32.174516] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2
[ 32.176579] Driver 'sd' needs updating - please use bus_type methods
[ 32.179434] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 32.179467] sd 0:0:0:0: [sda] Write Protect is off
[ 32.179474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 32.179518] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.179623] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 32.179650] sd 0:0:0:0: [sda] Write Protect is off
[ 32.179657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 32.179698] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.179708] sda:<6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
[ 32.185456] usbcore: registered new interface driver usbhid
[ 32.185466] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 32.187694] Driver 'sr' needs updating - please use bus_type methods
[ 32.243043] sda1 sda2 < sda5 sda6 >
[ 32.257309] sd 0:0:0:0: [sda] Attached SCSI disk
[ 32.275934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 32.275980] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 32.288281] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 32.288291] Uniform CD-ROM driver Revision: 3.20
[ 32.288390] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 32.706555] Attempting manual resume
[ 32.706563] swsusp: Resume From Partition 8:5
[ 32.706568] PM: Checking swsusp image.
[ 32.706792] PM: Resume from disk failed.
[ 32.778222] kjournald starting. Commit interval 5 seconds
[ 32.778242] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.293804] Linux agpgart interface v0.102
[ 44.372751] agpgart: Detected an Intel 855PM Chipset.
[ 44.447894] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.540180] agpgart: AGP aperture is 256M @ 0xe0000000
[ 44.540262] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.688006] intel_rng: FWH not detected
[ 45.047886] iTCO_vendor_support: vendor-support=0
[ 45.119866] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 45.120844] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460)
[ 45.120937] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 46.991427] input: Power Button (FF) as /devices/virtual/input/input3
[ 47.007115] ACPI: Power Button (FF) [PWRF]
[ 47.007321] input: Lid Switch as /devices/virtual/input/input4
[ 47.007446] ACPI: Lid Switch [LID]
[ 47.007613] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 47.019123] ACPI: Sleep Button (CM) [SLPB]
[ 47.019305] input: Power Button (CM) as /devices/virtual/input/input6
[ 47.039101] ACPI: Power Button (CM) [PWRB]
[ 49.481686] ACPI: AC Adapter [AC0] (on-line)
[ 49.756983] ACPI: Battery Slot [BAT0] (battery present)
[ 51.065841] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 52.101259] [fglrx] Maximum main memory to use for locked dma buffers: 1172 MBytes.
[ 52.101370] [fglrx] ASYNCIO init succeed!
[ 52.102284] [fglrx] PAT is enabled successfully!
[ 52.121236] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 52.257919] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input7
[ 52.269183] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 52.721393] ieee80211_crypt: registered algorithm 'NULL'
[ 52.777001] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 52.777010] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 52.980125] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 52.980134] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 52.980331] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 53.052875] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 54.752528] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 55.627069] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[ 55.666708] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 58.916632] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 58.916703] Yenta: CardBus bridge found at 0000:02:0b.0 [1734:106b]
[ 58.916730] Yenta O2: res at 0x94/0xD4: 00/ea
[ 58.916735] Yenta O2: enabling read prefetch/write burst
[ 59.043504] Yenta: ISA IRQ mask 0x0000, PCI irq 11
[ 59.043512] Socket status: 30000006
[ 59.043519] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 59.043531] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 59.043538] cs: IO port probe 0xc000-0xcfff: clean.
[ 59.044248] pcmcia: parent PCI bridge Memory window: 0xffd00000 - 0xffdfffff
[ 59.058377] Yenta: CardBus bridge found at 0000:02:0b.1 [1734:106b]
[ 59.183491] Yenta: ISA IRQ mask 0x0000, PCI irq 11
[ 59.183499] Socket status: 30000006
[ 59.183505] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 59.183516] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 59.183524] cs: IO port probe 0xc000-0xcfff: clean.
[ 59.184232] pcmcia: parent PCI bridge Memory window: 0xffd00000 - 0xffdfffff
[ 59.194786] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 59.194823] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 59.522467] intel8x0_measure_ac97_clock: measured 55037 usecs
[ 59.522476] intel8x0: clocking to 48000
[ 60.054049] cs: IO port probe 0x100-0x3af: clean.
[ 60.056050] cs: IO port probe 0x3e0-0x4ff: clean.
[ 60.056575] cs: IO port probe 0x820-0x8ff: clean.
[ 60.057270] cs: IO port probe 0xc00-0xcf7: clean.
[ 60.058373] cs: IO port probe 0xa00-0xaff: clean.
[ 60.080348] cs: IO port probe 0x100-0x3af: clean.
[ 60.082347] cs: IO port probe 0x3e0-0x4ff: clean.
[ 60.082870] cs: IO port probe 0x820-0x8ff: clean.
[ 60.083564] cs: IO port probe 0xc00-0xcf7: clean.
[ 60.084633] cs: IO port probe 0xa00-0xaff: clean.
[ 60.661023] lp: driver loaded but no devices found
[ 61.194448] acpi_cpufreq: no version for "struct_module" found: kernel tainted.
[ 61.304227] Adding 1003960k swap on /dev/sda5. Priority:-1 extents:1 across:1003960k
[ 62.127094] EXT3 FS on sda1, internal journal
[ 62.963927] kjournald starting. Commit interval 5 seconds
[ 62.964369] EXT3 FS on sda6, internal journal
[ 62.964379] EXT3-fs: mounted filesystem with ordered data mode.
[ 64.028022] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.843633] No dock devices found.
[ 67.170224] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 67.170235] apm: overridden by ACPI.
[ 67.593492] ppdev: user-space parallel port driver
[ 67.737281] audit(1208935677.339:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4950 profile="/usr/sbin/cupsd" namespace="default"
[ 70.189672] eth0: link down
[ 70.413653] Bluetooth: Core ver 2.11
[ 70.426568] NET: Registered protocol family 31
[ 70.426578] Bluetooth: HCI device and connection manager initialized
[ 70.426586] Bluetooth: HCI socket layer initialized
[ 70.698319] Bluetooth: L2CAP ver 2.9
[ 70.698329] Bluetooth: L2CAP socket layer initialized
[ 70.754278] Bluetooth: RFCOMM socket layer initialized
[ 70.754301] Bluetooth: RFCOMM TTY layer initialized
[ 70.754307] Bluetooth: RFCOMM ver 1.8
[ 72.978109] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 74.451119] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 74.451133] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 74.451143] [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
[ 74.454969] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 74.456077] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 74.457225] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 74.458362] [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
[ 74.468580] [fglrx] GART Table is not in FRAME_BUFFER range
[ 74.468598] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 74.468606] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000
[ 74.617175] [fglrx] interrupt source 20008000 successfully enabled
[ 74.617191] [fglrx] enable ID = 0x00000004
[ 74.619065] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 74.620391] [fglrx] interrupt source 10000000 successfully enabled
[ 74.620401] [fglrx] enable ID = 0x00000005
[ 74.622156] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 91.753233] NET: Registered protocol family 10
[ 91.754706] lo: Disabled Privacy Extensions
[ 91.756463] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 102.366502] eth1: no IPv6 routers present
[ 105.502785] NET: Registered protocol family 17
[ 106.229066] ieee80211_crypt: registered algorithm 'CCMP'
[ 106.678371] padlock: VIA PadLock not detected.
[ 107.216234] ieee80211_crypt: registered algorithm 'TKIP'
[ 124.619276] eth1: no IPv6 routers present
[ 447.055512] Clocksource tsc unstable (delta = 339913258 ns)
[ 447.110056] Time: acpi_pm clocksource has been installed.