Hallo,
ich habe ein Problem auf meinem IBM Thinkpad X40, irgendeiner Intel 8xx Chipsatz, mit dem Sound. Der Sound war bei der Installation da, verschwand dann plötzlich. Dann habe ich das System neu Installiert, Xubuntu 9.04, trotzdem kein Sound. Das Notebook piepst, und piepst auch über den Kopfhörer (wenn angeschlossen), entsprechend läuft die Soundkarte noch. Im BIOS kann man bezüglich sound nichts an und ausstellen, ich habe die Einstellungen durchkämmt.
Das Forum habe ich durchsucht, aber die Ratschläge sind darauf ausgelegt, dass der Rechner die Soundkarte bereits sehen muss. Also:
grep "^audio" /etc/group | grep "$USER" | wc -l gibt "1" aus asoundconf list gibt gar nichts aus, genauso wie "cat /proc/asound/cards" und lspci | grep -i audio nichts ausgeben
lspci gibt aus
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d) 02:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13) 02:01.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller
und dmesg gibt aus:
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-14-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 2009 (Ubuntu 2.6.28-14.47-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002f6e0000 (usable) [ 0.000000] BIOS-e820: 000000002f6e0000 - 000000002f6f7000 (ACPI data) [ 0.000000] BIOS-e820: 000000002f6f7000 - 000000002f6f9000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002f700000 - 0000000030000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x2f6e0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002f6e0000 (usable) [ 0.000000] modified: 000000002f6e0000 - 000000002f6f7000 (ACPI data) [ 0.000000] modified: 000000002f6f7000 - 000000002f6f9000 (ACPI NVS) [ 0.000000] modified: 000000002f700000 - 0000000030000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 2f6e0000 @ 10000-16000 [ 0.000000] RAMDISK: 2ef8d000 - 2f6cf053 [ 0.000000] ACPI: RSDP 000F6D10, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 2F6E7E57, 0054 (r1 IBM TP-1U 2080 LTP 0) [ 0.000000] ACPI: FACP 2F6E7F00, 00F4 (r3 IBM TP-1U 2080 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926] [ 0.000000] ACPI: DSDT 2F6E80E7, ECE9 (r1 IBM TP-1U 2080 MSFT 100000E) [ 0.000000] ACPI: FACS 2F6F8000, 0040 [ 0.000000] ACPI: SSDT 2F6E80B4, 0033 (r1 IBM TP-1U 2080 MSFT 100000E) [ 0.000000] ACPI: ECDT 2F6F6DD0, 0052 (r1 IBM TP-1U 2080 IBM 1) [ 0.000000] ACPI: TCPA 2F6F6E22, 0032 (r1 IBM TP-1U 2080 PTL 1) [ 0.000000] ACPI: APIC 2F6F6E54, 005A (r1 IBM TP-1U 2080 IBM 1) [ 0.000000] ACPI: BOOT 2F6F6FD8, 0028 (r1 IBM TP-1U 2080 LTP 1) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 758MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2f6e0000 [ 0.000000] low ram: 00000000 - 2f6e0000 [ 0.000000] bootmap 00012000 - 00017edc [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002f6e0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac] [ 0.000000] #4 [002ef8d000 - 002f6cf053] RAMDISK ==> [002ef8d000 - 002f6cf053] [ 0.000000] #5 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000] [ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000018000] BOOTMAP ==> [0000012000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002f6e0 [ 0.000000] HighMem 0x0002f6e0 -> 0x0002f6e0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0002f6e0 [ 0.000000] On node 0 totalpages: 194149 [ 0.000000] free_area_init_node: node 0, pgdat c06ca500, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1486 pages used for memmap [ 0.000000] Normal zone: 188690 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 192631 [ 0.000000] Kernel command line: root=UUID=3224336e-6a47-4916-9531-37a706a6e767 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 1196.124 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 3885440 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 750592k/777088k available (4115k kernel code, 25860k reserved, 2196k data, 532k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xefee0000 - 0xff3fe000 ( 245 MB) [ 0.004000] lowmem : 0xc0000000 - 0xef6e0000 ( 758 MB) [ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB) [ 0.004000] .data : 0xc0504def - 0xc0729e60 (2196 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504def (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.24 BogoMIPS (lpj=4784496) [ 0.004038] Security Framework initialized [ 0.004049] SELinux: Disabled at boot. [ 0.004081] AppArmor: AppArmor initialized [ 0.004093] Mount-cache hash table entries: 512 [ 0.004275] Initializing cgroup subsys ns [ 0.004281] Initializing cgroup subsys cpuacct [ 0.004285] Initializing cgroup subsys memory [ 0.004291] Initializing cgroup subsys freezer [ 0.004311] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004316] CPU: L2 cache: 1024K [ 0.004330] Checking 'hlt' instruction... OK. [ 0.020969] SMP alternatives: switching to UP code [ 0.180394] Freeing SMP alternatives: 18k freed [ 0.180399] ACPI: Core revision 20080926 [ 0.189908] ACPI: Checking initramfs for custom DSDT [ 0.724515] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.767724] CPU0: Intel(R) Pentium(R) M processor 1200MHz stepping 05 [ 0.768002] Brought up 1 CPUs [ 0.768002] Total of 1 processors activated (2392.24 BogoMIPS). [ 0.768002] CPU0 attaching NULL sched-domain. [ 0.768002] net_namespace: 776 bytes [ 0.768002] Booting paravirtualized kernel on bare hardware [ 0.768002] Time: 20:55:26 Date: 08/17/09 [ 0.768002] regulator: core version 0.5 [ 0.768002] NET: Registered protocol family 16 [ 0.768002] EISA bus registered [ 0.768002] ACPI: bus type pci registered [ 0.768002] PCI: PCI BIOS revision 2.10 entry at 0xfd8c8, last bus=5 [ 0.768002] PCI: Using configuration type 1 for base access [ 0.768973] ACPI: EC: EC description table is found, configuring boot EC [ 0.780756] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.912907] ACPI: Interpreter enabled [ 0.912913] ACPI: (supports S0 S3 S4 S5) [ 0.912943] ACPI: Using IOAPIC for interrupt routing [ 0.938999] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.939003] ACPI: EC: driver started in interrupt mode [ 0.945544] ACPI: ACPI Dock Station Driver: 4 docks/bays found [ 0.945562] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.945718] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.945725] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff] [ 0.945732] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807] [ 0.945750] pci 0000:00:02.0: supports D1 [ 0.945771] pci 0000:00:02.1: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.945777] pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff] [ 0.945799] pci 0000:00:02.1: supports D1 [ 0.945871] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.945921] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.945971] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.946028] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff] [ 0.946071] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.946077] pci 0000:00:1d.7: PME# disabled [ 0.946155] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.946164] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.946170] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.946191] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.946199] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.946207] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.946215] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.946223] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.946231] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.946279] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.946331] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] [ 0.946342] pci 0000:02:00.0: supports D1 D2 [ 0.946345] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.946350] pci 0000:02:00.0: PME# disabled [ 0.946380] pci 0000:02:00.1: reg 10 32bit mmio: [0xd0220000-0xd02200ff] [ 0.946414] pci 0000:02:00.1: supports D1 D2 [ 0.946417] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.946423] pci 0000:02:00.1: PME# disabled [ 0.946467] pci 0000:02:01.0: reg 10 32bit mmio: [0xd0200000-0xd021ffff] [ 0.946479] pci 0000:02:01.0: reg 18 io port: [0x6000-0x603f] [ 0.946507] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.946512] pci 0000:02:01.0: PME# disabled [ 0.946553] pci 0000:00:1e.0: transparent bridge [ 0.946558] pci 0000:00:1e.0: bridge io port: [0x2000-0x6fff] [ 0.946565] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff] [ 0.946571] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.946595] bus 00 -> node 0 [ 0.946605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.946902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.950160] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.950517] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.950871] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.951226] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.951581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.951908] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.952241] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.952602] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.952774] ACPI: Power Resource [PUBS] (on) [ 0.952774] ACPI: WMI: Mapper loaded [ 0.952774] SCSI subsystem initialized [ 0.952774] libata version 3.00 loaded. [ 0.952774] usbcore: registered new interface driver usbfs [ 0.952774] usbcore: registered new interface driver hub [ 0.952774] usbcore: registered new device driver usb [ 0.952884] PCI: Using ACPI for IRQ routing [ 0.953000] Bluetooth: Core ver 2.13 [ 0.953000] NET: Registered protocol family 31 [ 0.953000] Bluetooth: HCI device and connection manager initialized [ 0.953000] Bluetooth: HCI socket layer initialized [ 0.953000] NET: Registered protocol family 8 [ 0.953000] NET: Registered protocol family 20 [ 0.953000] NetLabel: Initializing [ 0.953000] NetLabel: domain hash size = 128 [ 0.953000] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.953000] NetLabel: unlabeled traffic allowed by default [ 0.953000] AppArmor: AppArmor Filesystem Enabled [ 0.953000] pnp: PnP ACPI init [ 0.953000] ACPI: bus type pnp registered [ 0.964465] pnp: PnP ACPI: found 12 devices [ 0.964469] ACPI: ACPI bus type pnp unregistered [ 0.964473] PnPBIOS: Disabled by ACPI PNP [ 0.964488] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.964493] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.964497] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.964502] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.964506] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.964511] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.964515] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.964520] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.964524] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.964529] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.964533] system 00:00: iomem range 0x100000-0x1fdffff could not be reserved [ 0.964538] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.964550] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.964554] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.964558] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.964563] system 00:02: ioport range 0x1600-0x167f has been reserved [ 0.964567] system 00:02: ioport range 0x1680-0x169f has been reserved [ 0.999360] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 [ 0.999365] pci 0000:02:00.0: IO window: 0x002000-0x0020ff [ 0.999370] pci 0000:02:00.0: IO window: 0x002400-0x0024ff [ 0.999376] pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff [ 0.999382] pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff [ 0.999387] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.999392] pci 0000:00:1e.0: IO window: 0x2000-0x6fff [ 0.999399] pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff [ 0.999405] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.999421] pci 0000:00:1e.0: setting latency timer to 64 [ 0.999435] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.999442] bus: 00 index 0 io port: [0x00-0xffff] [ 0.999446] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.999450] bus: 02 index 0 io port: [0x2000-0x6fff] [ 0.999454] bus: 02 index 1 mmio: [0xd0200000-0xdfffffff] [ 0.999457] bus: 02 index 2 mmio: [0xf0000000-0xf7ffffff] [ 0.999461] bus: 02 index 3 io port: [0x00-0xffff] [ 0.999464] bus: 02 index 4 mmio: [0x000000-0xffffffff] [ 0.999468] bus: 03 index 0 io port: [0x2000-0x20ff] [ 0.999471] bus: 03 index 1 io port: [0x2400-0x24ff] [ 0.999475] bus: 03 index 2 mmio: [0xf0000000-0xf3ffffff] [ 0.999478] bus: 03 index 3 mmio: [0xd4000000-0xd7ffffff] [ 0.999493] NET: Registered protocol family 2 [ 0.999669] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.000122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.001388] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.002289] TCP: Hash tables configured (established 131072 bind 65536) [ 1.002294] TCP reno registered [ 1.002508] NET: Registered protocol family 1 [ 1.002727] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 1.512935] it is [ 2.066799] Freeing initrd memory: 7432k freed [ 2.066860] Simple Boot Flag at 0x35 set to 0x1 [ 2.066900] cpufreq: No nForce2 chipset. [ 2.067144] audit: initializing netlink socket (disabled) [ 2.067171] type=2000 audit(1250542527.064:1): initialized [ 2.079670] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.081996] VFS: Disk quotas dquot_6.5.1 [ 2.082099] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.083194] fuse init (API version 7.10) [ 2.083336] msgmni has been set to 1480 [ 2.083624] alg: No test for stdrng (krng) [ 2.083642] io scheduler noop registered [ 2.083645] io scheduler anticipatory registered [ 2.083649] io scheduler deadline registered [ 2.083680] io scheduler cfq registered (default) [ 2.083702] pci 0000:00:02.0: Boot video device [ 2.099885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.099900] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.100632] ACPI: AC Adapter [AC] (on-line) [ 2.137546] ACPI: Battery Slot [BAT0] (battery present) [ 2.137649] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.137654] ACPI: Power Button (FF) [PWRF] [ 2.137725] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.138265] ACPI: Lid Switch [LID] [ 2.138335] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 2.138341] ACPI: Sleep Button (CM) [SLPB] [ 2.141203] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.141240] processor ACPI_CPU:00: registered as cooling_device0 [ 2.141246] ACPI: Processor [CPU] (supports 8 throttling states) [ 2.152274] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.154273] ACPI: Thermal Zone [THM0] (56 C) [ 2.154340] isapnp: Scanning for PnP cards... [ 2.507020] isapnp: No Plug & Play device found [ 2.508805] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.510005] serial 00:09: activated [ 2.510109] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 2.511262] brd: module loaded [ 2.511753] loop: module loaded [ 2.511853] Fixed MDIO Bus: probed [ 2.511864] PPP generic driver version 2.4.2 [ 2.511957] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.512014] Driver 'sd' needs updating - please use bus_type methods [ 2.512029] Driver 'sr' needs updating - please use bus_type methods [ 2.512133] ata_piix 0000:00:1f.1: version 2.12 [ 2.512143] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.512157] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.512205] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.512318] scsi0 : ata_piix [ 2.512605] scsi1 : ata_piix [ 2.514115] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 2.514120] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 2.676381] ata1.00: ATA-5: HITACHI_DK13FA-40B, 00MCA0B4, max UDMA/100 [ 2.676385] ata1.00: 78140160 sectors, multi 16: LBA [ 2.684345] ata1.00: configured for UDMA/100 [ 2.848462] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8083N, 0K04, max UDMA/33 [ 2.864615] ata2.00: configured for UDMA/33 [ 2.865335] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK13FA-4 00MC PQ: 0 ANSI: 5 [ 2.865474] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 2.865499] sd 0:0:0:0: [sda] Write Protect is off [ 2.865503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.865540] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.865633] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 2.865653] sd 0:0:0:0: [sda] Write Protect is off [ 2.865657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.865692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.865698] sda: sda1 sda2 < sda5 > [ 3.003895] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.003966] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.009727] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8083N 0K04 PQ: 0 ANSI: 5 [ 3.023285] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 3.023290] Uniform CD-ROM driver Revision: 3.20 [ 3.023426] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.023480] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.024435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.024844] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 3.024861] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.024893] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.024898] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.024996] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.028909] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.028917] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.028937] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0100000 [ 3.044011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.044128] usb usb1: configuration #1 chosen from 1 choice [ 3.044171] hub 1-0:1.0: USB hub found [ 3.044182] hub 1-0:1.0: 6 ports detected [ 3.044351] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.044379] uhci_hcd: USB Universal Host Controller Interface driver [ 3.044827] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 3.044834] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.044842] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.044847] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.044917] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.044949] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 3.045063] usb usb2: configuration #1 chosen from 1 choice [ 3.045101] hub 2-0:1.0: USB hub found [ 3.045111] hub 2-0:1.0: 2 ports detected [ 3.045824] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 3.045833] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.045841] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.045845] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.045908] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.045938] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 3.046060] usb usb3: configuration #1 chosen from 1 choice [ 3.046097] hub 3-0:1.0: USB hub found [ 3.046106] hub 3-0:1.0: 2 ports detected [ 3.046219] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.046228] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.046232] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.046298] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.046327] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.046440] usb usb4: configuration #1 chosen from 1 choice [ 3.046477] hub 4-0:1.0: USB hub found [ 3.046486] hub 4-0:1.0: 2 ports detected [ 3.046687] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.053232] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.053240] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.053400] mice: PS/2 mouse device common for all mice [ 3.053631] rtc_cmos 00:06: RTC can wake from S4 [ 3.053686] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.053708] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 3.053823] device-mapper: uevent: version 1.0.3 [ 3.053982] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.054057] device-mapper: multipath: version 1.0.5 loaded [ 3.054061] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.054185] EISA: Probing bus 0 at eisa.0 [ 3.054193] Cannot allocate resource for EISA slot 1 [ 3.054197] Cannot allocate resource for EISA slot 2 [ 3.054200] Cannot allocate resource for EISA slot 3 [ 3.054204] Cannot allocate resource for EISA slot 4 [ 3.054207] Cannot allocate resource for EISA slot 5 [ 3.054211] Cannot allocate resource for EISA slot 6 [ 3.054219] EISA: Detected 0 cards. [ 3.054333] cpuidle: using governor ladder [ 3.054425] cpuidle: using governor menu [ 3.055324] TCP cubic registered [ 3.055515] NET: Registered protocol family 10 [ 3.056221] lo: Disabled Privacy Extensions [ 3.056773] NET: Registered protocol family 17 [ 3.056798] Bluetooth: L2CAP ver 2.11 [ 3.056801] Bluetooth: L2CAP socket layer initialized [ 3.056805] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.056808] Bluetooth: SCO socket layer initialized [ 3.056847] Bluetooth: RFCOMM socket layer initialized [ 3.056857] Bluetooth: RFCOMM TTY layer initialized [ 3.056859] Bluetooth: RFCOMM ver 1.10 [ 3.057428] Using IPI No-Shortcut mode [ 3.057547] registered taskstats version 1 [ 3.057698] Magic number: 5:303:953 [ 3.057805] rtc_cmos 00:06: setting system clock to 2009-08-17 20:55:28 UTC (1250542528) [ 3.057810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.057813] EDD information not available. [ 3.058175] Freeing unused kernel memory: 532k freed [ 3.058347] Write protecting the kernel text: 4116k [ 3.058406] Write protecting the kernel read-only data: 1524k [ 3.061910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.301469] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 3.301480] hub 1-0:1.0: hub_port_status failed (err = -32) [ 3.505509] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 3.505520] hub 1-0:1.0: hub_port_status failed (err = -32) [ 3.631673] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 3.631679] Copyright (c) 1999-2006 Intel Corporation. [ 3.631749] e1000 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.893922] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0a:e4:27:e2:0f [ 3.917580] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 3.917616] hub 1-0:1.0: hub_port_status failed (err = -32) [ 4.123012] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 4.124012] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 4.124807] hub 1-0:1.0: hub_port_status failed (err = -32) [ 4.256004] Marking TSC unstable due to TSC halts in idle [ 4.329485] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 4.329496] hub 1-0:1.0: hub_port_status failed (err = -32) [ 4.329500] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 4.385475] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 4.385480] hub 1-0:1.0: hub_port_status failed (err = -32) [ 4.476167] PM: Starting manual resume from disk [ 4.476173] PM: Resume from partition 8:5 [ 4.476175] PM: Checking hibernation image. [ 4.476353] PM: Resume from disk failed. [ 4.529836] kjournald starting. Commit interval 5 seconds [ 4.529851] EXT3-fs: mounted filesystem with ordered data mode. [ 4.589488] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 4.589499] hub 1-0:1.0: hub_port_status failed (err = -32) [ 4.793492] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 4.793503] hub 1-0:1.0: hub_port_status failed (err = -32) [ 4.997488] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 4.997513] hub 1-0:1.0: hub_port_status failed (err = -32) [ 5.201482] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 5.201490] hub 1-0:1.0: hub_port_status failed (err = -32) [ 5.201494] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 5.257481] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 5.257490] hub 1-0:1.0: hub_port_status failed (err = -32) [ 5.461484] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 5.461579] hub 1-0:1.0: hub_port_status failed (err = -32) [ 5.665485] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 5.665494] hub 1-0:1.0: hub_port_status failed (err = -32) [ 5.869488] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 5.869497] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.073480] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 6.073490] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.073494] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 6.129483] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 6.129492] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.333483] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 6.333494] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.537491] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 6.537501] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.741487] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 6.741611] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.945478] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 6.945484] hub 1-0:1.0: hub_port_status failed (err = -32) [ 6.945488] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 6.945504] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 7.252029] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 7.372027] usb 2-1: device descriptor read/64, error -71 [ 7.596030] usb 2-1: device descriptor read/64, error -71 [ 7.812027] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 7.932026] usb 2-1: device descriptor read/64, error -71 [ 8.156032] usb 2-1: device descriptor read/64, error -71 [ 8.372028] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 8.780030] usb 2-1: device not accepting address 4, error -71 [ 9.560036] usb 2-1: new full speed USB device using uhci_hcd and address 5 [ 9.968028] usb 2-1: device not accepting address 5, error -71 [ 9.968045] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 10.208031] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 10.328029] usb 3-2: device descriptor read/64, error -71 [ 10.552033] usb 3-2: device descriptor read/64, error -71 [ 10.768030] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 10.888029] usb 3-2: device descriptor read/64, error -71 [ 11.112033] usb 3-2: device descriptor read/64, error -71 [ 11.328034] usb 3-2: new low speed USB device using uhci_hcd and address 4 [ 11.736029] usb 3-2: device not accepting address 4, error -71 [ 11.848028] usb 3-2: new low speed USB device using uhci_hcd and address 5 [ 12.256032] usb 3-2: device not accepting address 5, error -71 [ 12.256044] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 13.465374] udev: starting version 141 [ 14.153281] Linux agpgart interface v0.103 [ 14.191040] intel_rng: FWH not detected [ 14.240261] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.828633] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 14.828955] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 14.830895] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 14.841405] Non-volatile memory driver v1.2 [ 14.899328] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 14.984413] parport_pc 00:0a: activated [ 14.984419] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.984457] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 15.025164] sdhci: Secure Digital Host Controller Interface driver [ 15.025169] sdhci: Copyright(c) Pierre Ossman [ 15.029993] sdhci-pci 0000:02:00.1: SDHCI controller found [1180:0822] (rev 13) [ 15.030017] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 15.033171] mmc0: SDHCI controller on PCI [0000:02:00.1] using PIO [ 15.043940] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:06/input/input6 [ 15.046763] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 15.264892] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 15.269185] irda_init() [ 15.269205] NET: Registered protocol family 23 [ 15.333649] iTCO_vendor_support: vendor-support=0 [ 15.337812] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 15.337983] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 15.338100] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.361069] ppdev: user-space parallel port driver [ 15.387843] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0555] [ 15.429894] psmouse serio1: ID: 10 00 64<6>thinkpad_acpi: ThinkPad ACPI Extras v0.21 [ 15.462091] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 15.462095] thinkpad_acpi: ThinkPad BIOS 1UETD3WW (2.08 ), EC 1UHT58WW-1.12 [ 15.462099] thinkpad_acpi: IBM ThinkPad X40, model 2371KG2 [ 15.467877] Registered led device: tpacpi::thinklight [ 15.468408] Registered led device: tpacpi::power [ 15.468464] Registered led device: tpacpi:orange:batt [ 15.468519] Registered led device: tpacpi:green:batt [ 15.468574] Registered led device: tpacpi::dock_active [ 15.468629] Registered led device: tpacpi::bay_active [ 15.468684] Registered led device: tpacpi::dock_batt [ 15.468740] Registered led device: tpacpi::unknown_led [ 15.468803] Registered led device: tpacpi::standby [ 15.470703] thinkpad_acpi: CMOS NVRAM (7) and EC (0) do not agree on display brightness level [ 15.471080] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 15.486103] nsc-ircc 00:0b: activated [ 15.486110] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 15.486139] nsc-ircc, chip->init [ 15.486148] nsc-ircc, Found chip at base=0x164e [ 15.486171] nsc-ircc, driver loaded (Dag Brattli) [ 15.487376] IrDA: Registered device irda0 [ 15.487380] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 15.487607] nsc-ircc, chip->init [ 15.487619] nsc-ircc, Found chip at base=0x02e [ 15.487642] nsc-ircc, driver loaded (Dag Brattli) [ 15.487648] nsc_ircc_open(), can't get iobase of 0x2f8 [ 15.517247] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0c30, PCI irq 16 [ 15.517253] yenta_cardbus 0000:02:00.0: Socket status: 30000006 [ 15.517262] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff [ 15.517268] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x6fff: clean. [ 15.518866] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff [ 15.518871] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 15.727728] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 15.742708] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 15.873233] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 15.874097] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 15.874486] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 15.874816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 15.875328] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 15.996025] Clocksource tsc unstable (delta = -254681212 ns) [ 16.041796] lp0: using parport0 (interrupt-driven). [ 16.132286] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k [ 16.801164] EXT3 FS on sda1, internal journal [ 18.204388] type=1505 audit(1250542543.646:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1870 [ 18.204600] type=1505 audit(1250542543.646:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1870 [ 18.204681] type=1505 audit(1250542543.646:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1870 [ 18.204748] type=1505 audit(1250542543.646:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1870 [ 18.450091] type=1505 audit(1250542543.890:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1875 [ 18.450444] type=1505 audit(1250542543.890:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1875 [ 18.497056] type=1505 audit(1250542543.938:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1879 [ 21.600998] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.601003] Bluetooth: BNEP filters: protocol multicast [ 21.637117] Bridge firewalling registered [ 24.548044] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 24.583146] [drm] Initialized drm 1.1.0 20060810 [ 24.627604] pci 0000:00:02.0: power state changed by ACPI to D0 [ 24.627618] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.627626] pci 0000:00:02.0: setting latency timer to 64 [ 24.627871] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 24.741266] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 24.741301] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 26.036492] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 27.528043] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 27.560577] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 27.560966] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.568500] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.496045] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 33.480042] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 33.592033] usb 3-2: new low speed USB device using uhci_hcd and address 6 [ 33.712029] usb 3-2: device descriptor read/64, error -71 [ 33.936028] usb 3-2: device descriptor read/64, error -71 [ 34.152041] usb 3-2: new low speed USB device using uhci_hcd and address 7 [ 34.272035] usb 3-2: device descriptor read/64, error -71 [ 34.496033] usb 3-2: device descriptor read/64, error -71 [ 34.712048] usb 3-2: new low speed USB device using uhci_hcd and address 8 [ 35.120068] usb 3-2: device not accepting address 8, error -71 [ 35.232031] usb 3-2: new low speed USB device using uhci_hcd and address 9 [ 35.644031] usb 3-2: device not accepting address 9, error -71 [ 35.644050] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 35.756031] usb 2-1: new full speed USB device using uhci_hcd and address 6 [ 35.876036] usb 2-1: device descriptor read/64, error -71 [ 36.100052] usb 2-1: device descriptor read/64, error -71 [ 36.316030] usb 2-1: new full speed USB device using uhci_hcd and address 7 [ 36.436033] usb 2-1: device descriptor read/64, error -71 [ 36.660049] usb 2-1: device descriptor read/64, error -71 [ 36.876044] usb 2-1: new full speed USB device using uhci_hcd and address 8 [ 37.284024] usb 2-1: device not accepting address 8, error -71 [ 37.396055] usb 2-1: new full speed USB device using uhci_hcd and address 9 [ 37.780022] eth0: no IPv6 routers present [ 37.805604] usb 2-1: device not accepting address 9, error -71 [ 37.805632] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 145.084074] mtrr: no MTRR for e0000000,8000000 found [ 147.596995] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 147.597047] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 148.686790] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 1674.126649] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2980.745498] ehci_hcd 0000:00:1d.7: port 1 reset error -110 [ 2980.745542] hub 1-0:1.0: hub_port_status failed (err = -32) [ 2981.000066] usb 3-2: new low speed USB device using uhci_hcd and address 10 [ 2981.124053] usb 3-2: device descriptor read/64, error -71 [ 2981.348053] usb 3-2: device descriptor read/64, error -71 [ 2981.564055] usb 3-2: new low speed USB device using uhci_hcd and address 11 [ 2982.352057] usb 3-2: device descriptor read/64, error -71 [ 2982.576043] usb 3-2: device descriptor read/64, error -71 [ 2982.792058] usb 3-2: new low speed USB device using uhci_hcd and address 12 [ 2983.200031] usb 3-2: device not accepting address 12, error -71 [ 2983.312048] usb 3-2: new low speed USB device using uhci_hcd and address 13 [ 2983.720037] usb 3-2: device not accepting address 13, error -71 [ 2983.720103] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 4054.922909] [drm:i915_getparam] *ERROR* Unknown parameter 6
nur die probleme mit dem USB, nichts bezüglich sound.
Vielen Dank im voraus.