|
Anmeldungsdatum: Beiträge: Zähle... |
Hallo erst, habe erst Ubuntu Studio istalliert, heut denn Displamanger: Fluxbox. Jetzt habe ich Caos auf meinem Pc weiß nicht was ich machen soll. Fluxbox und Ubuntu Studio klappen beide nicht so richtig. Paar Programme gehen gar nicht oder nur kurz auf. Gibt es eine Möglichkeit System zurück zu setzen, wie bei win? Oder alle Fehler zu sehen? Halt das Fluxbox bei mir einwandfrei klappt unter Ubuntu Studio. System: 2,41 GHZ 1 gb RAM Grafikkarte: AMd Radeon 9000 Family Festplatte: 80 GB MFG |
|
Maskottchen
Anmeldungsdatum: Beiträge: 5641 |
Joeses schrieb:
Windowmanager.
Welche. Was sind die Ausgaben der Programme, wenn man sie auf der Konsole startet.
Ist nicht noetig. Du kannst einfach in dem displaymanager eine andere Fensterverwaltung oder eine Desktopumgebung auswaehlen und gut ist. Vermute ich, mit so wenig Angaben muss ich etwas raten.
Ja. Starte die Programme in einer Konsole.
retour Fuchs |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 8 |
Hi, danke für die antwort. gksu /usr/sbin/synaptic ^bei dem Befehl kommt nichts in der Konsole.Das bild taucht kurz auf und ist dann wieder weg. dmesg hat das ausgespuckt: [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258545 [ 0.000000] Kernel command line: root=UUID=cdb967fd-5bed-4c7f-9d96-5d1bcc21a998 ro quiet splash locale=de_DE [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2411.684 MHz processor. [ 22.731979] Console: colour VGA+ 80x25 [ 22.731984] console [tty0] enabled [ 22.732798] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.733616] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.782181] Memory: 1020956k/1048512k available (2225k kernel code, 26832k reserved, 1059k data, 368k init, 131008k highmem) [ 22.782193] virtual kernel memory layout: [ 22.782195] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 22.782196] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.782197] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.782199] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.782200] .init : 0xc043b000 - 0xc0497000 ( 368 kB) [ 22.782201] .data : 0xc032c6f0 - 0xc0435324 (1059 kB) [ 22.782202] .text : 0xc0100000 - 0xc032c6f0 (2225 kB) [ 22.782206] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.842349] Calibrating delay using timer specific routine.. 4825.15 BogoMIPS (lpj=2412579) [ 22.842413] Security Framework initialized [ 22.842425] SELinux: Disabled at boot. [ 22.842438] AppArmor: AppArmor initialized [ 22.842443] Failure registering capabilities with primary security module. [ 22.842464] Mount-cache hash table entries: 512 [ 22.842694] Initializing cgroup subsys ns [ 22.842702] Initializing cgroup subsys cpuacct [ 22.842721] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 00000000 [ 22.842738] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 22.842742] CPU: L2 cache: 512K [ 22.842745] CPU: Hyper-Threading is disabled [ 22.842748] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00000400 00000000 00000000 00000000 [ 22.842765] Compat vDSO mapped to ffffe000. [ 22.842784] Checking 'hlt' instruction... OK. [ 22.846812] SMP alternatives: switching to UP code [ 22.848191] Freeing SMP alternatives: 9k freed [ 22.848377] Early unpacking initramfs... done [ 23.211541] ACPI: Core revision 20070126 [ 23.211624] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.329098] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 [ 23.329147] Total of 1 processors activated (4825.15 BogoMIPS). [ 23.329256] ENABLING IO-APIC IRQs [ 23.329444] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 23.440969] Brought up 1 CPUs [ 23.441001] CPU0 attaching sched-domain: [ 23.441005] domain 0: span 01 [ 23.441007] groups: 01 [ 23.441297] net_namespace: 76 bytes [ 23.441310] Booting paravirtualized kernel on bare hardware [ 23.441990] Time: 14:18:53 Date: 09/08/08 [ 23.442044] NET: Registered protocol family 16 [ 23.442358] EISA bus registered [ 23.442387] ACPI: bus type pci registered [ 23.455362] PCI: PCI BIOS revision 2.10 entry at 0xfac50, last bus=1 [ 23.455366] PCI: Using configuration type 1 [ 23.455389] Setting up standard PCI resources [ 23.457960] ACPI: EC: Look up EC in DSDT [ 23.461555] ACPI: Interpreter enabled [ 23.461559] ACPI: (supports S0 S3 S4 S5) [ 23.461575] ACPI: Using IOAPIC for interrupt routing [ 23.467175] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 23.467443] Enabling SiS 96x SMBus. [ 23.468230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 23.486505] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 23.486617] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 23.486728] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 23.486837] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 23.486945] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 23.487057] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 23.487168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 23.487278] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 23.487466] Linux Plug and Play Support v0.97 (c) Adam Belay [ 23.487515] pnp: PnP ACPI init [ 23.487528] ACPI: bus type pnp registered [ 23.491272] pnp: PnP ACPI: found 14 devices [ 23.491276] ACPI: ACPI bus type pnp unregistered [ 23.491284] PnPBIOS: Disabled by ACPI PNP [ 23.491659] PCI: Using ACPI for IRQ routing [ 23.491663] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 23.530275] NET: Registered protocol family 8 [ 23.530279] NET: Registered protocol family 20 [ 23.530408] AppArmor: AppArmor Filesystem Enabled [ 23.542315] system 00:00: iomem range 0xcd000-0xcffff has been reserved [ 23.542320] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 23.542323] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 23.542326] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 23.542329] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 23.542332] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 23.542335] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 23.542338] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 23.542341] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 23.542344] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 23.542348] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 23.542351] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 23.542360] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 23.542363] system 00:02: ioport range 0x800-0x805 has been reserved [ 23.572946] PCI: Bridge: 0000:00:01.0 [ 23.572951] IO window: c000-cfff [ 23.572958] MEM window: ec000000-edffffff [ 23.572964] PREFETCH window: e0000000-e7ffffff [ 23.573005] NET: Registered protocol family 2 [ 23.608247] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 23.608715] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 23.610342] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 23.614249] TCP: Hash tables configured (established 131072 bind 65536) [ 23.614260] TCP reno registered [ 23.626378] checking if image is initramfs... it is [ 24.335300] Freeing initrd memory: 7389k freed [ 24.336210] audit: initializing netlink socket (disabled) [ 24.336233] audit(1220883533.325:1): initialized [ 24.336359] krcupreemptd setsched 0 [ 24.336362] prio = 98 [ 24.336566] highmem bounce pool size: 64 pages [ 24.336657] VFS: Disk quotas dquot_6.5.1 [ 24.336689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 24.336809] io scheduler noop registered [ 24.336812] io scheduler anticipatory registered [ 24.336814] io scheduler deadline registered [ 24.336823] io scheduler cfq registered (default) [ 24.336882] Boot video device is 0000:01:00.0 [ 24.337303] isapnp: Scanning for PnP cards... [ 24.694267] isapnp: No Plug & Play device found [ 24.743935] Real Time Clock Driver v1.12ac [ 24.744077] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 24.744228] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 24.744475] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 24.745520] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 24.746192] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 24.747394] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 24.747492] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 24.747716] PNP: No PS/2 controller found. Probing ports directly. [ 24.785460] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 24.796853] mice: PS/2 mouse device common for all mice [ 24.797030] EISA: Probing bus 0 at eisa.0 [ 24.797039] Cannot allocate resource for EISA slot 1 [ 24.797054] Cannot allocate resource for EISA slot 5 [ 24.797067] EISA: Detected 0 cards. [ 24.797072] cpuidle: using governor ladder [ 24.797191] NET: Registered protocol family 1 [ 24.797232] Using IPI No-Shortcut mode [ 24.797296] registered taskstats version 1 [ 24.797390] Magic number: 8:374:333 [ 24.797513] hash matches device tty54 [ 24.797550] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 24.797553] EDD information not available. [ 24.798062] Freeing unused kernel memory: 368k freed [ 26.130734] fuse init (API version 7.9) [ 26.929355] SCSI subsystem initialized [ 26.988110] usbcore: registered new interface driver usbfs [ 26.988145] usbcore: registered new interface driver hub [ 27.017025] usbcore: registered new device driver usb [ 27.050960] libata version 3.00 loaded. [ 27.061314] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 27.061409] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 27.061427] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 27.061956] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 27.070936] ohci_hcd 0000:00:03.0: irq 16, io mem 0xef001000 [ 27.074939] 8139too Fast Ethernet driver 0.9.28 [ 27.125995] usb usb1: configuration #1 chosen from 1 choice [ 27.126028] hub 1-0:1.0: USB hub found [ 27.126044] hub 1-0:1.0: 2 ports detected [ 27.171918] Floppy drive(s): fd0 is 1.44M [ 27.197563] FDC 0 is a post-1991 82077 [ 27.226925] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17 [ 27.226945] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 27.226977] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 27.234773] ohci_hcd 0000:00:03.1: irq 17, io mem 0xef002000 [ 27.287812] usb usb2: configuration #1 chosen from 1 choice [ 27.287848] hub 2-0:1.0: USB hub found [ 27.287863] hub 2-0:1.0: 2 ports detected [ 27.388706] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18 [ 27.388727] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 27.388764] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 27.390576] ohci_hcd 0000:00:03.2: irq 18, io mem 0xef003000 [ 27.445572] usb usb3: configuration #1 chosen from 1 choice [ 27.445605] hub 3-0:1.0: USB hub found [ 27.445619] hub 3-0:1.0: 2 ports detected [ 27.487422] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 27.547879] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 [ 27.547901] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 27.547951] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 [ 27.547996] PCI: cache line size of 128 is not supported by device 0000:00:03.3 [ 27.550090] ehci_hcd 0000:00:03.3: irq 19, io mem 0xef004000 [ 27.652185] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 27.652360] usb usb4: configuration #1 chosen from 1 choice [ 27.652392] hub 4-0:1.0: USB hub found [ 27.652404] hub 4-0:1.0: 6 ports detected [ 27.753220] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 20 [ 27.753909] eth0: RealTek RTL8139 at 0xe000, 00:20:ed:55:52:2e, IRQ 20 [ 27.753912] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 27.759292] pata_sis 0000:00:02.5: version 0.5.2 [ 27.767401] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 27.770170] scsi0 : pata_sis [ 27.771567] scsi1 : pata_sis [ 27.772257] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 27.772260] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 27.996212] ata1.00: ATA-7: ExcelStor Technology J8160, P22OA8BA, max UDMA/133 [ 27.996218] ata1.00: 312581808 sectors, multi 16: LBA48 [ 27.996662] ata1.01: ATA-6: ST380023A, 3.30, max UDMA/100 [ 27.996666] ata1.01: 156301488 sectors, multi 16: LBA [ 28.003215] ata1.00: configured for UDMA/133 [ 28.025179] ata1.01: configured for UDMA/100 [ 28.049680] usb 1-1: device not accepting address 2, error -62 [ 28.329557] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB03, max UDMA/33 [ 28.486367] ata2.00: configured for UDMA/33 [ 28.486554] scsi 0:0:0:0: Direct-Access ATA ExcelStor Techno P22O PQ: 0 ANSI: 5 [ 28.487216] scsi 0:0:1:0: Direct-Access ATA ST380023A 3.30 PQ: 0 ANSI: 5 [ 28.488294] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB03 PQ: 0 ANSI: 5 [ 28.509290] Driver 'sd' needs updating - please use bus_type methods [ 28.509409] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 28.509427] sd 0:0:0:0: [sda] Write Protect is off [ 28.509430] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.509456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.509523] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 28.509538] sd 0:0:0:0: [sda] Write Protect is off [ 28.509541] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.509565] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.509569] sda: [ 28.518532] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.518619] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 28.518637] sd 0:0:1:0: [sdb] Write Protect is off [ 28.518641] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 28.518666] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.518727] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 28.518742] sd 0:0:1:0: [sdb] Write Protect is off [ 28.518745] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 28.518769] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.518772] sdb:<4>Driver 'sr' needs updating - please use bus_type methods [ 28.533135] sdb1 sdb2 < sdb5 > [ 28.548171] sd 0:0:1:0: [sdb] Attached SCSI disk [ 28.556798] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 28.556806] Uniform CD-ROM driver Revision: 3.20 [ 28.556888] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 28.568845] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.568871] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 28.568894] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 28.929576] usb 1-1: new low speed USB device using ohci_hcd and address 4 [ 28.944243] Attempting manual resume [ 28.944248] swsusp: Resume From Partition 8:21 [ 28.944250] PM: Checking swsusp image. [ 28.944490] PM: Resume from disk failed. [ 28.991874] EXT3-fs: mounted filesystem with ordered data mode. [ 28.991967] kjournald starting. Commit interval 5 seconds [ 29.122060] usb 1-1: configuration #1 chosen from 1 choice [ 29.396970] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 29.586435] usb 3-1: configuration #1 chosen from 1 choice [ 39.214872] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.302523] Linux agpgart interface v0.102 [ 39.359504] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x5c00 [ 39.426449] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.463396] agpgart: Detected SiS chipset - id:1606 [ 39.468516] agpgart: AGP aperture is 64M @ 0xe8000000 [ 39.813083] input: Power Button (FF) as /devices/virtual/input/input1 [ 39.821837] ACPI: Power Button (FF) [PWRF] [ 39.821976] input: Power Button (CM) as /devices/virtual/input/input2 [ 39.833814] ACPI: Power Button (CM) [PWRB] [ 39.833985] input: Sleep Button (CM) as /devices/virtual/input/input3 [ 39.845793] ACPI: Sleep Button (CM) [FUTS] [ 40.142642] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 41.757533] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 41.966543] usbcore: registered new interface driver hiddev [ 41.972467] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0/input/input5 [ 41.982236] input,hidraw0: USB HID v1.00 Keyboard [MLK MTS2118 Wireless Desktop] on usb-0000:00:03.0-1 [ 41.990672] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.1/input/input6 [ 42.014334] input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK MTS2118 Wireless Desktop] on usb-0000:00:03.0-1 [ 42.027229] input: WALTOP International Corp. Slim Tablet as /devices/pci0000:00/0000:00:03.2/usb3/3-1/3-1:1.0/input/input7 [ 42.038232] input,hiddev97,hidraw2: USB HID v1.10 Mouse [WALTOP International Corp. Slim Tablet] on usb-0000:00:03.2-1 [ 42.038261] usbcore: registered new interface driver usbhid [ 42.038267] /build/buildd/linux-2.6.24/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 42.105936] intel8x0_measure_ac97_clock: measured 50792 usecs [ 42.105943] intel8x0: clocking to 48000 [ 42.772324] parport_pc 00:0a: reported by Plug and Play ACPI [ 42.772355] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 46.078397] lp0: using parport0 (interrupt-driven). [ 46.163270] Adding 3028212k swap on /dev/sdb5. Priority:-1 extents:1 across:3028212k [ 46.752428] EXT3 FS on sdb1, internal journal [ 48.104301] ip_tables: (C) 2000-2006 Netfilter Core Team [ 48.680763] No dock devices found. [ 50.340724] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 50.340732] apm: overridden by ACPI. [ 50.625736] ppdev: user-space parallel port driver [ 50.805574] audit(1220883560.885:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4770 profile="/usr/sbin/cupsd" namespace="default" [ 53.002293] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 53.144770] Bluetooth: Core ver 2.11 [ 53.145809] NET: Registered protocol family 31 [ 53.145816] Bluetooth: HCI device and connection manager initialized [ 53.145821] Bluetooth: HCI socket layer initialized [ 53.202989] Bluetooth: L2CAP ver 2.9 [ 53.203296] Bluetooth: L2CAP socket layer initialized [ 53.265715] Bluetooth: RFCOMM socket layer initialized [ 53.274211] Bluetooth: RFCOMM TTY layer initialized [ 53.274735] Bluetooth: RFCOMM ver 1.8 [ 55.407033] [drm] Initialized drm 1.1.0 20060810 [ 55.421896] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22 [ 55.422019] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 56.341028] NET: Registered protocol family 17 [ 57.090074] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 57.090101] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 57.090156] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 57.478618] [drm] Setting GART location based on new memory map [ 57.478632] [drm] Loading R200 Microcode [ 57.478665] [drm] writeback test succeeded in 1 usecs [ 59.364473] NET: Registered protocol family 10 [ 59.365090] lo: Disabled Privacy Extensions [ 69.887880] eth0: no IPv6 routers present [ 2246.044031] usb 4-4: new high speed USB device using ehci_hcd and address 4 [ 2246.160040] usb 4-4: configuration #1 chosen from 2 choices [ 2246.262438] usbcore: registered new interface driver libusual [ 2246.311192] Initializing USB Mass Storage driver... [ 2246.326295] scsi2 : SCSI emulation for USB Mass Storage devices [ 2246.328474] usbcore: registered new interface driver usb-storage [ 2246.328485] USB Mass Storage support registered. [ 2246.329258] usb-storage: device found at 4 [ 2246.329431] usb-storage: waiting for device to settle before scanning [ 2251.322583] usb-storage: device scan complete [ 2251.323304] scsi 2:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [ 2251.325904] sd 2:0:0:0: [sdc] 495616 2048-byte hardware sectors (1015 MB) [ 2251.326520] sd 2:0:0:0: [sdc] Write Protect is off [ 2251.326527] sd 2:0:0:0: [sdc] Mode Sense: 64 00 00 08 [ 2251.326530] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2251.329023] sd 2:0:0:0: [sdc] 495616 2048-byte hardware sectors (1015 MB) [ 2251.329763] sd 2:0:0:0: [sdc] Write Protect is off [ 2251.329769] sd 2:0:0:0: [sdc] Mode Sense: 64 00 00 08 [ 2251.329772] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2251.329779] sdc: unknown partition table [ 2251.360538] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 2251.360611] sd 2:0:0:0: Attached scsi generic sg3 type 0 [14057.789814] blender-bin[17392]: segfault at 00000200 eip b7f2ebad esp bfb07e00 error 4 [14086.629619] blender-bin[25426]: segfault at 00000200 eip b7ff1bad esp bfd5bb50 error 4 [14089.166094] mtrr: no MTRR for e0000000,4000000 found [14091.715368] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [14091.715764] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [14091.716018] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [14092.068684] [drm] Setting GART location based on new memory map [14092.069001] [drm] Loading R200 Microcode [14092.069215] [drm] writeback test succeeded in 1 usecs [14135.383709] mtrr: no MTRR for e0000000,4000000 found [14137.927534] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [14137.927879] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [14137.928138] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [14138.280778] [drm] Setting GART location based on new memory map [14138.281116] [drm] Loading R200 Microcode [14138.281296] [drm] writeback test succeeded in 1 usecs [14230.359709] apt-check[28355]: segfault at cf8a1fa0 eip b7c94de9 esp bf8c8490 error 5 [14253.794421] update-manager[28760]: segfault at cd8f0fa0 eip b6c7dde9 esp bfafa610 error 5 [14288.660046] synaptic[29316]: segfault at ce5f1fa0 eip b7eadde9 esp bfe3c940 error 5 [14295.349205] update-manager[29483]: segfault at cd892fa0 eip b6c1fde9 esp bff23a40 error 5 [14305.078986] synaptic[29694]: segfault at ce5b0fa0 eip b7e6cde9 esp bfd985c0 error 5 [14309.888106] update-manager[29768]: segfault at cd8f3fa0 eip b6c80de9 esp bfe5f170 error 5 [14317.004614] synaptic[29919]: segfault at ce7cefa0 eip b7e9fde9 esp bfc6cbd0 error 5 [14355.594298] apt-get[30481]: segfault at cf860fa0 eip b7eabde9 esp bf8f1c70 error 5 [14377.424861] usb 4-4: USB disconnect, address 4 [14377.503442] scsi 2:0:0:0: rejecting I/O to dead device [14426.309209] mtrr: no MTRR for e0000000,4000000 found [14428.856833] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [14428.857178] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [14428.857480] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [14429.210052] [drm] Setting GART location based on new memory map [14429.210359] [drm] Loading R200 Microcode [14429.210567] [drm] writeback test succeeded in 1 usecs [14475.500157] synaptic[306]: segfault at ce602fa0 eip b7eabde9 esp bfd02080 error 5 [14480.629640] synaptic[398]: segfault at ce5b1fa0 eip b7e5ade9 esp bffa17d0 error 5 [14494.292944] synaptic[471]: segfault at ce607fa0 eip b7ec6de9 esp bfbcb580 error 5 [14527.350630] gnome-apt[1231]: segfault at ce537fa0 eip b752dde9 esp bfe8c9b0 error 5 [14535.228457] gdebi-gtk[1358]: segfault at ce1acfa0 eip b7c3cde9 esp bf87ef30 error 5 [14589.865901] update-manager[2328]: segfault at cd9b6fa0 eip b6d37de9 esp bfb57f30 error 5 [14781.543878] synaptic[5825]: segfault at ce5edfa0 eip b7e96de9 esp bf9fe230 error 5 [14796.297756] synaptic[6098]: segfault at ce5e3fa0 eip b7e8cde9 esp bf81c040 error 5 [15198.756060] apt-get[13150]: segfault at cf879fa0 eip b7ec4de9 esp bfa310d0 error 5 [15362.048735] apt-get[16130]: segfault at cf8cffa0 eip b7f1ade9 esp bff075b0 error 5 [15409.180117] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [15409.180147] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [15409.180202] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [15409.180211] [drm] Loading R200 Microcode [15417.158484] mtrr: no MTRR for e0000000,4000000 found [15419.715204] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [15419.715575] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [15419.715830] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [15420.068618] [drm] Setting GART location based on new memory map [15420.068928] [drm] Loading R200 Microcode [15420.069132] [drm] writeback test succeeded in 1 usecs [15477.423766] apt-get[18254]: segfault at cf7effa0 eip b7e3ade9 esp bfd043a0 error 5 [15497.161686] mtrr: no MTRR for e0000000,4000000 found [15499.703425] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [15499.703807] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [15499.704056] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [15500.056695] [drm] Setting GART location based on new memory map [15500.057010] [drm] Loading R200 Microcode [15500.057216] [drm] writeback test succeeded in 1 usecs [18898.602937] synaptic[12468]: segfault at ce678fa0 eip b7f21de9 esp bfc01450 error 5 [18921.957053] mtrr: no MTRR for e0000000,4000000 found [18924.513323] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [18924.513673] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [18924.513978] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [18924.866622] [drm] Setting GART location based on new memory map [18924.866948] [drm] Loading R200 Microcode [18924.867133] [drm] writeback test succeeded in 1 usecs [19008.017736] synaptic[14667]: segfault at ce63cfa0 eip b7ef8de9 esp bfc75850 error 5 [19012.332263] apt-check[14819]: segfault at cf801fa0 eip b7bf4de9 esp bf8dbc90 error 5 Wie kann ich dann Fluxbox Entfernen wenn das ein Winmasanger ist. MFG |
|
Maskottchen
Anmeldungsdatum: Beiträge: 5641 |
[19008.017736] synaptic[14667]: segfault at ce63cfa0 eip b7ef8de9 esp bfc75850 error 5 Du hast Segmentation Faults. Lies: das Programm versucht auf Speicherbereiche zuzugreiffen, auf die es nicht zugreiffen darf / die nicht existieren. Das Problem entsteht meist durch 1) Fehler im Programm ersteres / zweiteres prueft man mit gdb oder strace, letzteres mit Memtest. Fluxbox entfernst Du wie jedes andere Programm auch, in dem Displaymanager (gdm/kdm/entrance/slim) solltest Du, wenn andere installiert sind, Alternativen auswaehlen koennen. Fuchs |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 8 |
Fluxbox habe ich entfernt, memtest kann ich nicht machen, da ich nicht weiß wie man das mace. zu Bibliotheken habe die meist mit Terminal bezogen, oder Aktualisieren. Aber danke jetzt klappt wieder alles so einigermassen. MFG |
