staging.inyokaproject.org

voxxell99 schrieb:

Deine Beitragsformatierung ist echt für den Popo!

Nachfragerfranzi

Ist darauf eine Antwort gewünscht oder noch genügend Platz?

Es wird Spannend.Zeige

dpkg -l libusb*

scanimage >Test

Na dann man los:

sepp@sepp-d1607:~$ dpkg -l libusb*
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
         Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name           Version      Architektur  Beschreibung
+++-==============-============-============-=================================
ii  libusb-0.1-4:i 2:0.1.12-28  i386         userspace USB programming library
ii  libusb-1.0-0:i 2:1.0.20-1   i386         userspace USB programming library
un  libusb-dev     <keine>      <keine>      (keine Beschreibung vorhanden)
un  libusbmuxd-too <keine>      <keine>      (keine Beschreibung vorhanden)
rc  libusbmuxd2    1.0.8-2ubunt i386         USB multiplexor daemon for iPhone
ii  libusbmuxd4:i3 1.0.10-2ubun i386         USB multiplexor daemon for iPhoneode

~$ scanimage >Test Der Scanner läuft an und stoppt dann ohne Aussage. Test über Imagescan wie bisher.Simple Scan erkennt den Scanner nicht.

Habe gerade gesehen das OmniPage noch existiert. Kann das reinspielen?

Nff

OmniPage kenne ich nicht.Zeige mal

export SANE_DEBUG_DLL=255 && scanimage -L

Ist ein altes Programm in Verbindung mit dem entsorgten Z-25 Drucker und dem Lide 20 Scanner.

Csepp@sepp-d1607:~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.25git
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/imagescan
[dll] sane_init/read_config: reading dll.d/imagescan
[dll] add_backend: adding backend `imagescan'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_get_devices
[dll] load: searching backend `xerox_mfp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pie' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.2
[dll] load: searching backend `kodak' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2506
[dll] load: searching backend `fujitsu' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.126
[dll] load: searching backend `epsonds' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.35
[dll] load: searching backend `epson2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `epjitsu' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.28
[dll] load: searching backend `dmc' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.2
[dll] load: searching backend `canon_dr' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.49
[dll] load: searching backend `canon630u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.25
[dll] load: searching backend `imagescan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 1 devices
device `imagescan:esci:usb:/sys/devices/pci0000:00/0000:00:10.4/usb1/1-1/1-1.1/1-1.1:1.0' is a EPSON XP-342_343_345_Series 
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `imagescan's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished

Wenn notwendig als Datei schicken?

Nff

Hallo Kellerkind_2009

Es ist an der Zeit sich Abendruhe zu gönnen. Danke bis hierher und wenn es möglich ist, könnten wir ja in nächster Zeit die Sache weiterführen. Würde mich freuen eine Nachricht dazu zu erhalten.

Nff

@ Moderatorentaem

Guten Morgen.

Der Post an Kellerkind vom 26. Januar 2018 19:52 ist nicht die richtige Form.

Kann er gelöscht werden ? Erstelle einen anderen Post mit einer Datei.

Nff

Guten morgen.Das Gerät ist soweit da,allerdings hab ich solche Ausgabe noch nicht gesehen 😇

device `imagescan:esci:usb:/sys/devices/pci0000:00/0000:00:10.4/usb1/1-1/1-1.1/1-1.1:1.0' is a EPSON XP-342_343_345_Series 

Schließe das Gerät mal direkt an den USB Port das PC an,nicht über den HUB. Probiere dann nochmal zu Scannen.

Kellerkind_2009 schrieb:

Guten morgen.Das Gerät ist soweit da,allerdings hab ich solche Ausgabe noch nicht gesehen 😇

device `imagescan:esci:usb:/sys/devices/pci0000:00/0000:00:10.4/usb1/1-1/1-1.1/1-1.1:1.0' is a EPSON XP-342_343_345_Series 

Schließe das Gerät mal direkt an den USB Port das PC an,nicht über den HUB. Probiere dann nochmal zu Scannen.

Nachfragefranzi

Drucker am USB-Anschluß

Test 1: Über Desktop-Menü. Scanvorgang startet aber wie bisher keine Dateiübermittlung.

Test 2: Über das Druckermenü. Scan starten bringt dann: Keine Kommunikationsverbindung,Verbindung überprüfen.

Anbei die Systeminfo.

Nff

Welche Dateiendung für den Anhang erforderlich?

Nachfragerfranzi schrieb:

@ Moderatorentaem

Ob du es glaubst oder nicht: Die derzeit 10 Moderatoren lesen nicht jeden der derzeit 8.932.218 Beiträge hier. Sie so erreichen zu wollen ist also absolut abwegig, dafür gibt es die Melden-Funktion.

Hmm,zeige

sudo sane-find-scanner

sowie

sudo -H xsane

Nachfragerfranzi

 # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
Code

sudo -H xsane  Warnung :Sie versuchen XSane als Root auszuführen. Hab es unterlassen

Nff

Zeige

cat /etc/sane.d/epkowa.conf

uname -a

cat: /etc/sane.d/epkowa.conf: Datei oder Verzeichnis nicht gefunden
sepp@sepp-d1607:~$ 
sepp@sepp-d1607:~$ 
sepp@sepp-d1607:~$ uname -a
Linux sepp-d1607 4.13.0-26-generic #29~16.04.2-Ubuntu SMP Tue Jan 9 21:38:24 UTC 2018 i686 athlon i686 GNU/Linux

Die Rechte bei USB sowie das hier

could not fetch string descriptor: Pipe error

sind schlecht.Versuche folgendes

sudo apt-get install --reinstall linux-image-$(uname -r)

zeige die gesamte Ausgabe.