Epson Perfection V330 Photo wird mit scanimage -L nicht erkannt. › Drucken, Scannen, Faxen › Ubuntu verwenden › Forum › staging.inyokaproject.org

Epson Perfection V330 Photo wird mit scanimage -L nicht erkannt.

« Vorherige12 3 4 Nächste »

Status: Ungelöst | Ubuntu-Version: Kubuntu 17.10 (Artful Aardvark)
Antworten |

peerwal Anmeldungsdatum: 19. Oktober 2013 Beiträge: Zähle...	Zitieren 8. Januar 2018 13:52 (zuletzt bearbeitet: 8. Januar 2018 14:32) Mit der aktuellen Kubuntu-Version wird mein Scanner nicht mehr erkannt, obwohl er mit lsusb gefunden wird. ich habe das ppa http://ppa.launchpad.net/rolfbensch/sane-git/ubuntu eingerichtet sowie die Pakete libsane1 libsane-common sane-uitils makedev xsane und den Scannertreiber iscan-perfection-v330-bundle-1.0.1.x64.deb installiert. Dennoch erscheint der Scanner nirgends unter /dev und wird auch mit scanimage -L nicht erkannt. Was kann ich noch überprüfen?
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 8. Januar 2018 18:18 Hi,zeige mal die Terminal Ausgabe von export SANE_DEBUG_DLL=255 && scanimage -L sowie dpkg -l libusb* *sane iscan
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: Zähle...	Zitieren 8. Januar 2018 19:31 Hi,danke für die schnelle Antwort. Hier die etwas längliche Ausgabe von export SANE_DEBUG_DLL=255 && scanimage -L dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan [dll] sane_init/read_config: reading dll.d/iscan [dll] add_backend: adding backend `epkowa' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan3' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `epsonds' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `kodak' [dll] add_backend: adding backend `kodakaio' [dll] add_backend: adding backend `kvs1025' [dll] add_backend: adding backend `kvs20xx' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `magicolor' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pint' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `rts8891' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] add_backend: adding backend `xerox_mfp' [dll] sane_get_devices [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend `xerox_mfp' [dll] init: backend `xerox_mfp' is version 1.0.13 [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [dll] load: couldn't find backend `v4l' (No such file or directory) [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.2 [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend `rts8891' [dll] init: backend `rts8891' is version 1.0.2401 [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.17 [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [dll] load: couldn't find backend `pint' (No such file or directory) [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend `magicolor' [dll] init: backend `magicolor' is version 1.0.1 [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.32 [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend `kvs20xx' [dll] init: backend `kvs20xx' is version 1.0.2 [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend `kvs1025' [dll] init: backend `kvs1025' is version 1.0.5 [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] init: initializing backend `kodakaio' [dll] init: backend `kodakaio' is version 1.0.3 [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend `kodak' [dll] init: backend `kodak' is version 1.0.7 [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.1 [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.7 [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.2511 [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.133 [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] init: initializing backend `epsonds' [dll] init: backend `epsonds' is version 1.0.0 [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] init: backend `epson2' is version 1.0.124 [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.31 [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend `coolscan3' [dll] init: backend `coolscan3' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.3 [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.56 [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.297 [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.27 [dll] load: searching backend `epkowa' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' (No such file or directory) [dll] load: couldn't find backend `hpaio' (No such file or directory) [dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' (No such file or directory) [dll] load: couldn't find backend `ls5000' (No such file or directory) [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend `xerox_mfp's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `rts8891's exit function [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `qcam's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb2's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `mustek's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `magicolor's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `kvs20xx's exit function [dll] sane_exit: calling backend `kvs1025's exit function [dll] sane_exit: calling backend `kodakaio's exit function [dll] sane_exit: calling backend `kodak's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hpsj5s's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [dll] sane_exit: calling backend `genesys's exit function [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epsonds's exit function [dll] sane_exit: calling backend `epson2's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `dell1600n_net's exit function [dll] sane_exit: calling backend `coolscan3's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec_eplus48u's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: finished Und hier die Ausgabe von dpkg -l libusb* *sane iscan Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten \| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig \|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) \|\|/ Name Version Architektur Beschreibung +++-=======================================================-================================-================================-=================================================================================================================== rc iscan 2.30.2-2 amd64 simple, easy to use scanner utility for EPSON scanners rc libsane:amd64 1.0.27-artful1 amd64 API library for scanners ii libusb-1.0-0:amd64 2:1.0.21-2 amd64 userspace USB programming library ii libusb-1.0-0-dev:amd64 2:1.0.21-2 amd64 userspace USB programming library development files ii libusb-1.0-doc 2:1.0.21-2 all documentation for userspace USB programming un libusbmuxd-tools <keine> <keine> (keine Beschreibung vorhanden) ii libusbmuxd4:amd64 1.0.10-3 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library un xsane <keine> <keine> (keine Beschreibung vorhanden)
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 8. Januar 2018 19:39 Der Scanner kann nicht laufen weil der Treiber fehlt [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) was ist bei der Installation schief gegangen? rc iscan 2.30.2-2 amd64 simple, easy to use scanner utility for EPSON scanners rc libsane:amd64 1.0.27-artful1 amd64 Der libusb-0.1-4 fehlt auch sudo apt install libusb-0.1-4
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: 49	Zitieren 9. Januar 2018 15:34 (zuletzt bearbeitet: 9. Januar 2018 15:35) Habe den Treiber iscan_2.30.2-2_amd64.deb über die Kommandozeile neu installiert und keine Fehlermeldung erhalten. Dabei wurde dann auch automatisch iscan installiert. Das Problem ist allerfings nicht behoben, auch nicht, nachdem ich usb 0x04b8 0x0142 in die epkowa.conf eingetragen habe. Mir ist allerdings aufgefallen, dass ich nicht libsane sondern den Nachfolger libsane1 verwende.
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 9. Januar 2018 15:47 Zeige wieder die Ausgaben – sonnst kann man doch nichts Feststellen 😐 export SANE_DEBUG_DLL=255 && scanimage -L sowie dpkg -l libusb* *sane iscan
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: 49	Zitieren 9. Januar 2018 16:05 (zuletzt bearbeitet: 9. Januar 2018 16:09) Sorry, aber ich dachte, da hätte sich bis auf iscan nichts geändert, aber bei der Länge der Ausgabe... peter@T3500:~$ export SANE_DEBUG_DLL=255 && scanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan [dll] sane_init/read_config: reading dll.d/iscan [dll] add_backend: adding backend `epkowa' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan3' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `epsonds' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `kodak' [dll] add_backend: adding backend `kodakaio' [dll] add_backend: adding backend `kvs1025' [dll] add_backend: adding backend `kvs20xx' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `magicolor' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pint' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `rts8891' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] add_backend: adding backend `xerox_mfp' [dll] sane_get_devices [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend `xerox_mfp' [dll] init: backend `xerox_mfp' is version 1.0.13 [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [dll] load: couldn't find backend `v4l' (No such file or directory) [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.2 [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend `rts8891' [dll] init: backend `rts8891' is version 1.0.2401 [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.17 [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [dll] load: couldn't find backend `pint' (No such file or directory) [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend `magicolor' [dll] init: backend `magicolor' is version 1.0.1 [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.32 [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend `kvs20xx' [dll] init: backend `kvs20xx' is version 1.0.2 [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend `kvs1025' [dll] init: backend `kvs1025' is version 1.0.5 [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] init: initializing backend `kodakaio' [dll] init: backend `kodakaio' is version 1.0.3 [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend `kodak' [dll] init: backend `kodak' is version 1.0.7 [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.1 [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.7 [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.2511 [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.133 [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] init: initializing backend `epsonds' [dll] init: backend `epsonds' is version 1.0.0 [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] init: backend `epson2' is version 1.0.124 [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.31 [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend `coolscan3' [dll] init: backend `coolscan3' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.3 [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.56 [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.297 [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.27 [dll] load: searching backend `epkowa' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' (No such file or directory) [dll] load: couldn't find backend `hpaio' (No such file or directory) [dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' (No such file or directory) [dll] load: couldn't find backend `ls5000' (No such file or directory) [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend `xerox_mfp's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `rts8891's exit function [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `qcam's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb2's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `mustek's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `magicolor's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `kvs20xx's exit function [dll] sane_exit: calling backend `kvs1025's exit function [dll] sane_exit: calling backend `kodakaio's exit function [dll] sane_exit: calling backend `kodak's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hpsj5s's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [dll] sane_exit: calling backend `genesys's exit function [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epsonds's exit function [dll] sane_exit: calling backend `epson2's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `dell1600n_net's exit function [dll] sane_exit: calling backend `coolscan3's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec_eplus48u's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: finished ] peter@T3500:~$ dpkg -l libusb* *sane iscan Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten \| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig \|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) \|\|/ Name Version Architektur Beschreibung +++-=======================================================-================================-================================-=================================================================================================================== ii iscan 2.30.2-2 amd64 simple, easy to use scanner utility for EPSON scanners rc libsane:amd64 1.0.27-artful1 amd64 API library for scanners ii libusb-0.1-4:amd64 2:0.1.12-31 amd64 userspace USB programming library ii libusb-1.0-0:amd64 2:1.0.21-2 amd64 userspace USB programming library ii libusb-1.0-0-dev:amd64 2:1.0.21-2 amd64 userspace USB programming library development files ii libusb-1.0-doc 2:1.0.21-2 all documentation for userspace USB programming un libusb-dev <keine> <keine> (keine Beschreibung vorhanden) un libusbmuxd-tools <keine> <keine> (keine Beschreibung vorhanden) ii libusbmuxd4:amd64 1.0.10-3 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library ii xsane 0.999-5ubuntu2 amd64
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 9. Januar 2018 16:17 Na,jetzt weist du warum die Ausgaben Wichtig sind [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) rc libsane:amd64 1.0.27-artful1 amd64 API library for scanners Zeige die Ausgabe von sudo apt purge libsane* Bestätige ersteinmal mit n für nein bis ich die Ausgabe sehe.
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: 49	Zitieren 9. Januar 2018 19:29 Oops, habe leider in der Eile Deine letzte Zeile überlesen und purge... komplett ausgeführt. Die Ausgabe bis zur Abfrage lautet peter@T3500:~$ sudo apt purge libsane* [sudo] Passwort für peter: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Hinweis: 'libsane-extras' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane-dev' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane-extras-common' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane1' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane-hpaio' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane-common' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane-extras-dev' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane-perl' wird für Muster 'libsane' ausgewählt Hinweis: 'libsane' wird für Muster 'libsane' ausgewählt Paket »libsane-extras-common« ist nicht installiert, wird also auch nicht entfernt. Paket »libsane-extras-dev« ist nicht installiert, wird also auch nicht entfernt. Paket »libsane-perl« ist nicht installiert, wird also auch nicht entfernt. Paket »libsane-dev« ist nicht installiert, wird also auch nicht entfernt. Die folgenden Pakete werden ENTFERNT: esci-interpreter-perfection-v330 iscan* libsane* libsane-common* libsane-extras* libsane-hpaio* libsane1* sane-utils* xsane* 0 aktualisiert, 0 neu installiert, 9 zu entfernen und 0 nicht aktualisiert. Nach dieser Operation werden 15,2 MB Plattenplatz freigegeben. Möchten Sie fortfahren? [J/n] j anschließend habe ich libsane1 sowie den Scannertreiber mit Hilfe des mitgelieferten Installationsskriptes install.sh neu installiert. Die Installation erfolgete wiederum fehlerfrei: eter@T3500: ~/I/iscan-perfection-v330-bundle-1.0.1.x64.deb> sudo ./install.sh [sudo] Passwort für peter: OK:1 http://archive.canonical.com/ubuntu artful InRelease OK:2 http://repository.cliqz.com/dist/debian-release stable InRelease OK:3 http://es-mirrors.evowise.com/ubuntu artful InRelease OK:4 http://ppa.launchpad.net/dhor/myway/ubuntu artful InRelease Holen:5 http://es-mirrors.evowise.com/ubuntu artful-updates InRelease [78,6 kB] Holen:6 http://es-mirrors.evowise.com/ubuntu artful-backports InRelease [72,2 kB] Ign:7 http://repo.vivaldi.com/stable/deb stable InRelease OK:8 http://repository.spotify.com stable InRelease OK:9 http://ppa.launchpad.net/kubuntu-ppa/backports/ubuntu artful InRelease Holen:10 http://es-mirrors.evowise.com/ubuntu artful-security InRelease [78,6 kB] OK:11 http://repo.vivaldi.com/stable/deb stable Release OK:12 http://ppa.launchpad.net/libreoffice/libreoffice-5-3/ubuntu artful InRelease OK:13 http://ppa.launchpad.net/otto-kesselgulasch/gimp-edge/ubuntu artful InRelease OK:14 http://ppa.launchpad.net/papirus/papirus/ubuntu artful InRelease OK:15 http://ppa.launchpad.net/rikmills/latte-dock/ubuntu artful InRelease Holen:16 http://es-mirrors.evowise.com/ubuntu artful-updates/main amd64 DEP-11 Metadata [56,7 kB] OK:17 http://ppa.launchpad.net/rolfbensch/sane-git/ubuntu artful InRelease Holen:18 http://es-mirrors.evowise.com/ubuntu artful-updates/main DEP-11 64x64 Icons [35,1 kB] Holen:19 http://es-mirrors.evowise.com/ubuntu artful-updates/universe amd64 DEP-11 Metadata [48,2 kB] Holen:20 http://es-mirrors.evowise.com/ubuntu artful-updates/universe DEP-11 64x64 Icons [48,4 kB] Holen:21 http://es-mirrors.evowise.com/ubuntu artful-backports/universe amd64 DEP-11 Metadata [4.712 B] Holen:23 http://es-mirrors.evowise.com/ubuntu artful-security/main amd64 DEP-11 Metadata [204 B] Holen:24 http://es-mirrors.evowise.com/ubuntu artful-security/universe amd64 DEP-11 Metadata [10,2 kB] Es wurden 433 kB in 1 s geholt (221 kB/s). Paketlisten werden gelesen... Fertig Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Hinweis: »libsane1« wird an Stelle von »libsane« gewählt. libsane1 ist schon die neueste Version (1.0.27-1~experimental2ubuntu2.1). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Vormals nicht ausgewähltes Paket iscan wird gewählt. (Lese Datenbank ... 402647 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../core/iscan_2.30.2-2_amd64.deb ... Entpacken von iscan (2.30.2-2) ... Vorbereitung zum Entpacken von .../iscan-data_1.36.0-1_all.deb ... Entpacken von iscan-data (1.36.0-1) über (1.36.0-1) ... Vormals nicht ausgewähltes Paket esci-interpreter-perfection-v330 wird gewählt. Vorbereitung zum Entpacken von .../esci-interpreter-perfection-v330_0.2.0-1_amd64.deb ... Entpacken von esci-interpreter-perfection-v330 (0.2.0-1) ... iscan-data (1.36.0-1) wird eingerichtet ... iscan (2.30.2-2) wird eingerichtet ... Trigger für desktop-file-utils (0.23-1ubuntu3) werden verarbeitet ... esci-interpreter-perfection-v330 (0.2.0-1) wird eingerichtet ... Trigger für man-db (2.7.6.1-2) werden verarbeitet ... Trigger für mime-support (3.60ubuntu1) werden verarbeitet ... Trigger für udev (234-2ubuntu12.1) werden verarbeitet ... Trigger für libc-bin (2.26-0ubuntu2) werden verarbeitet ... aber das epkowa-Backend taucht immer noch nicht auf wie der entsprechende Auszug aus der Ausgabe von export SANE_DEBUG_DLL=255 && scanimage -L zeigt: [dll] load: searching backend `epkowa' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) [dll] sane_get_devices: found 0 devices Code
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 9. Januar 2018 19:48 Die Treiber liegen im Falschen Ordner (nicht deine Schuld) Führe die Installation von iscan_2.30.2-2_amd64.deb nochmal aus. Danach die Treiber Verlinken mit sudo ln -s /usr/lib/sane/* /usr/lib/x86_64-linux-gnu/sane/ Testen.
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: 49	Zitieren 10. Januar 2018 11:59 (zuletzt bearbeitet: 10. Januar 2018 13:35) Habe den Treiber noch mal installiert und die beschriebene Velinkung durchgeführt. Das epkowa-backend scheint nun an der richtigen Stelle zu liegen. Dennoch wird der Scanner nicht gefunden. Habe auch festgestellt, dass plötzlich sane und xsane nicht mehr da waren, und diese neu installiert. Hier noch mal die Ausgaben der von dir genannten Kommandos: peter@T3500:~$ export SANE_DEBUG_DLL=255 && scanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan [dll] sane_init/read_config: reading dll.d/iscan [dll] add_backend: adding backend `epkowa' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan3' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epkowa' [dll] add_backend: `epkowa' is already there [dll] add_backend: adding backend `epsonds' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `kodak' [dll] add_backend: adding backend `kodakaio' [dll] add_backend: adding backend `kvs1025' [dll] add_backend: adding backend `kvs20xx' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `magicolor' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pint' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `rts8891' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] add_backend: adding backend `xerox_mfp' [dll] sane_get_devices [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend `xerox_mfp' [dll] init: backend `xerox_mfp' is version 1.0.13 [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [dll] load: couldn't find backend `v4l' (No such file or directory) [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.2 [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend `rts8891' [dll] init: backend `rts8891' is version 1.0.2401 [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.17 [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [dll] load: couldn't find backend `pint' (No such file or directory) [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend `magicolor' [dll] init: backend `magicolor' is version 1.0.1 [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.32 [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend `kvs20xx' [dll] init: backend `kvs20xx' is version 1.0.2 [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend `kvs1025' [dll] init: backend `kvs1025' is version 1.0.5 [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] init: initializing backend `kodakaio' [dll] init: backend `kodakaio' is version 1.0.3 [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend `kodak' [dll] init: backend `kodak' is version 1.0.7 [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.1 [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.7 [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.2511 [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.133 [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] init: initializing backend `epsonds' [dll] init: backend `epsonds' is version 1.0.0 [dll] load: searching backend `epkowa' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [dll] init: backend `epkowa' is version 1.0.213 [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.31 [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend `coolscan3' [dll] init: backend `coolscan3' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.3 [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.56 [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.297 [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.27 [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend `xerox_mfp's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `rts8891's exit function [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `qcam's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb2's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `mustek's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `magicolor's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `kvs20xx's exit function [dll] sane_exit: calling backend `kvs1025's exit function [dll] sane_exit: calling backend `kodakaio's exit function [dll] sane_exit: calling backend `kodak's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hpsj5s's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [dll] sane_exit: calling backend `genesys's exit function [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epsonds's exit function [dll] sane_exit: calling backend `epkowa's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `dell1600n_net's exit function [dll] sane_exit: calling backend `coolscan3's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec_eplus48u's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: finished und peter@T3500:~$ dpkg -l libusb* sane iscan Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten \| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig \|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) \|\|/ Name Version Architektur Beschreibung +++-========================-=================-=================-===================================================== ii iscan 2.30.2-2 amd64 simple, easy to use scanner utility for EPSON scanner un libsane <keine> <keine> (keine Beschreibung vorhanden) ii libusb-0.1-4:amd64 2:0.1.12-31 amd64 userspace USB programming library ii libusb-1.0-0:amd64 2:1.0.21-2 amd64 userspace USB programming library ii libusb-1.0-0-dev:amd64 2:1.0.21-2 amd64 userspace USB programming library development files ii libusb-1.0-doc 2:1.0.21-2 all documentation for userspace USB programming un libusb-dev <keine> <keine> (keine Beschreibung vorhanden) un libusbmuxd-tools <keine> <keine> (keine Beschreibung vorhanden) ii libusbmuxd4:amd64 1.0.10-3 amd64 USB multiplexor daemon for iPhone and iPod Touch devi ii sane 1.0.14-12build1 amd64 scanner graphical frontends ii xsane 0.999-5ubuntu2 amd64 featureful graphical frontend for SANE (Scanner Acces Kann ich eigentlich libusb-0.1-4:amd64* deinstallieren und brauche ich vielleicht libusb-dev und/oder libusbmuxd-tools? Auch die Datei /etc/sane.d/dll.d/iscan war nach der Installation nicht vorhanden. Habe deshalb epkowa in /etc/sane.d/dll.conf eingetragen und dort epson und epson2 auskommentiert. Wenn ich scanimage -L als root ausführe, bekomme ich peter@T3500: ~> sudo scanimage -L device `epkowa:usb:001:005' is a Epson (unknown model) flatbed scanner device `epkowa:interpreter:001:005' is a Epson Perfection V330 Photo flatbed scanner Vielleicht muss ich irgendwo die Zugriffsrechte ändern?
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 10. Januar 2018 14:48 Na ja warum sane und xsane weg waren solltest du wissen 😉 Die folgenden Pakete werden ENTFERNT: esci-interpreter-perfection-v330* iscan* libsane* libsane-common* libsane-extras* libsane-hpaio* libsane1* sane-utils* xsane* Ob dieses Paket wieder vorhanden ist ist Wichtig.Zeige dpkg -l \| grep esci-* Setze noch einen Link sudo ln -s /usr/lib/libesmod.so.2.0.0 /usr/x86_64-linux-gnu/ Teste danach scanimage -L sowie sane-find-scanner Falls nichts gefunden wird auch Testen mit sudo sane-find-scanner
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: 49	Zitieren 10. Januar 2018 16:00 peter@T3500:~$ dpkg -l \| grep esci-* ii esci-interpreter-perfection-v330 0.2.0-1 amd64 Plugin for the GT-F730/S630 and Perfection V33/V330 Photo Den Link habe ich gesetzt. Statt sudo ln -s /usr/lib/libesmod.so.2.0.0 /usr/x86_64-linux-gnu/ sollte ea wohl heißen sudo ln -s /usr/lib/libesmod.so.2.0.0 /usr/lib/x86_64-linux-gnu/ Tests: eter@T3500: ~> scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). –- peter@T3500: ~> sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not open USB device 0x058f/0x6332 at 002:005: Access denied (insufficient permissions) could not open USB device 0x1a40/0x0201 at 002:004: Access denied (insufficient permissions) could not open USB device 0x05e3/0x0610 at 002:003: Access denied (insufficient permissions) could not open USB device 0x0480/0xa202 at 002:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 008:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 007:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions) could not open USB device 0x04b8/0x0142 at 001:005: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions) could not open USB device 0x046a/0x0023 at 003:003: Access denied (insufficient permissions) could not open USB device 0x046d/0xc063 at 003:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions) # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. –- peter@T3500: ~> sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not fetch string descriptor: Pipe error found USB scanner (vendor=0x04b8 [EPSON], product=0x0142 [EPSON Perfection V33/V330]) at libusb:001:005 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617	Zitieren 10. Januar 2018 16:07 Die Rechte stimmen nicht,darum findet er ihn nur mit sudo.Füge dich zur Gruppe Scanner und lp zu sudo adduser $USER scanner sudo adduser $USER lp Neustart und Testen.
peerwal (Themenstarter) Anmeldungsdatum: 19. Oktober 2013 Beiträge: 49	Zitieren 10. Januar 2018 19:04 (zuletzt bearbeitet: 10. Januar 2018 19:24) Der Scanner wird noch immer weder von scanimage -L noch von sane-find-scanner gefunden. Die Ausgaben der Kommandos wie in meiner letzten Antwort.

« Vorherige12 3 4 Nächste »

Antworten |

« Vorheriges Thema Nächstes Thema »