staging.inyokaproject.org

[Kommazahl] system-journald[274]: failed to write entry (22 items, dreistellige Zahl bytes), Read-only file system

[5Ziffern.6Ziffern] blk_update_request: I/O error, de4v sda sector 197207976 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[5Ziffern.6Ziffern] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x0
[5Ziffern.6Ziffern] ata1.00: irq_stat 0x40000001
[5Ziffern.6Ziffern] ata1: SError: { PHYRdyChg CommWake }
[5Ziffern.6Ziffern] ata1.00: failed command: RED DMA
[5Ziffern.6Ziffern] ata1.00: cmd c8/00:08:a8:27:c1/00:00:00:00:00/eb tag 0 dma 4096 in
[5Ziffern.6Ziffern]          res 51/40:08:a8:27:c1/00:00:00:00:00/0b Emask 0x9 media error)
[5Ziffern.6Ziffern] ata1.00: status: { DRDY ERR}
[5Ziffern.6Ziffern] ata1.00: error: { UNC }

:~$ sudo apt-get install smartmontools
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Vorgeschlagene Pakete:
  gsmartcontrol smart-notifier mailx | mailutils
Die folgenden NEUEN Pakete werden installiert:
  smartmontools
0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 525 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 2.087 kB Plattenplatz zusätzlich benutzt.
Holen:1 http://de.archive.ubuntu.com/ubuntu focal/main amd64 smartmontools amd64 7.1-1build1 [525 kB]
Es wurden 525 kB in 1 s geholt (786 kB/s).
Vormals nicht ausgewähltes Paket smartmontools wird gewählt.
dpkg: nicht behebbarer fataler Fehler, Abbruch:
Laden der Dateilisten-Datei des Paketes »aspell-en«: /var/lib/dpkg/info/aspell-en.list kann nicht gelesen werden (Eingabe-/Ausgabefehler)
E: Sub-process /usr/bin/dpkg returned an error code (2)

:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-18-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus Thin
Device Model:     ST320LT007-9ZV142
Serial Number:    W0Q68YTK
LU WWN Device Id: 5 000c50 05c432c18
Firmware Version: 0004LVM1
User Capacity:    320.072.933.376 bytes [320 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7242 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Dec 14 22:07:02 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  63) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x303b)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   095   085   034    Pre-fail  Always       -       32153722
  3 Spin_Up_Time            0x0003   098   098   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3215
  5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -       38
  7 Seek_Error_Rate         0x000f   069   060   030    Pre-fail  Always       -       111881255326
  9 Power_On_Hours          0x0032   092   092   000    Old_age   Always       -       7300 (179 75 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1997
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       2880
188 Command_Timeout         0x0032   100   096   000    Old_age   Always       -       34360262691
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   066   047   045    Old_age   Always       -       34 (Min/Max 22/34)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       274
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       43
193 Load_Cycle_Count        0x0032   055   055   000    Old_age   Always       -       91732
194 Temperature_Celsius     0x0022   034   053   000    Old_age   Always       -       34 (0 14 0 0 0)
195 Hardware_ECC_Recovered  0x001a   054   044   000    Old_age   Always       -       32153722
196 Reallocated_Event_Count 0x000f   092   092   030    Pre-fail  Always       -       7141 (26883 0)
197 Current_Pending_Sector  0x0012   092   088   000    Old_age   Always       -       176
198 Offline_Uncorrectable   0x0010   092   088   000    Old_age   Offline      -       176
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       2
250 Read_Error_Retry_Rate   0x0000   100   001   000    Old_age   Offline      -       3966
251 Unknown_Attribute       0x0000   100   001   000    Old_age   Offline      -       23
252 Unknown_Attribute       0x0000   100   001   000    Old_age   Offline      -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2880 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2880 occurred at disk power-on lifetime: 7292 hours (303 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 38 d4 ca 0b  Error: UNC at LBA = 0x0bcad438 = 197841976

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 38 d4 ca 4b 00      05:51:18.725  READ FPDMA QUEUED
  61 00 08 18 bd 06 49 00      05:51:18.725  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      05:51:18.725  FLUSH CACHE EXT
  ef 10 03 00 00 00 a0 00      05:51:18.724  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      05:51:18.724  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 2879 occurred at disk power-on lifetime: 7292 hours (303 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 38 d4 ca 0b  Error: WP at LBA = 0x0bcad438 = 197841976

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 f0 28 bc 06 49 00      05:51:13.881  WRITE FPDMA QUEUED
  61 00 08 00 38 84 40 00      05:51:13.880  WRITE FPDMA QUEUED
  60 00 08 38 d4 ca 4b 00      05:51:13.875  READ FPDMA QUEUED
  61 00 d8 e0 89 8c 4e 00      05:51:13.875  WRITE FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      05:51:13.874  SET FEATURES [Enable SATA feature]

Error 2878 occurred at disk power-on lifetime: 7292 hours (303 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 38 d4 ca 0b  Error: UNC at LBA = 0x0bcad438 = 197841976

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 38 d4 ca 4b 00      05:51:09.009  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      05:51:08.857  FLUSH CACHE EXT
  61 00 08 20 bc 06 49 00      05:51:08.856  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      05:51:08.849  FLUSH CACHE EXT
  61 00 20 00 bc 06 49 00      05:51:08.848  WRITE FPDMA QUEUED

Error 2877 occurred at disk power-on lifetime: 7292 hours (303 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 05 cb 0b  Error: UNC at LBA = 0x0bcb0580 = 197854592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 80 05 cb 4b 00      05:50:06.050  READ FPDMA QUEUED
  61 00 08 50 ae 06 49 00      05:50:06.050  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      05:50:06.050  FLUSH CACHE EXT
  ef 10 03 00 00 00 a0 00      05:50:06.049  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      05:50:06.049  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 2876 occurred at disk power-on lifetime: 7292 hours (303 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 05 cb 0b  Error: WP at LBA = 0x0bcb0580 = 197854592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 c8 88 ad 06 49 00      05:50:01.195  WRITE FPDMA QUEUED
  61 00 08 f8 ea 76 4f 00      05:50:01.194  WRITE FPDMA QUEUED
  60 00 08 80 05 cb 4b 00      05:50:01.189  READ FPDMA QUEUED
  61 00 08 60 92 04 4f 00      05:50:01.053  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      05:50:00.459  FLUSH CACHE EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      7297         197854592
# 2  Vendor (0x50)       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.