staging.inyokaproject.org

Hallo!

Habe ein wiederholtes Problem, welches schon mal erfolgreich gelöst wurde:

https://forum.ubuntuusers.de/topic/nach-upgrate-auf-18-04-funktioniert-weder-druc/5/#post-9020869

Habe einen WLAN Drucker mit Scanner - Brother-MFC-J4410DW.

Drucken funktioniert weiterhin, aber scannen plötzlich wieder nicht mehr. Habe den damals erfolgreichen Lösungsumfang mehrmals wiederholt, aber der Erfolg blieb aus.

Habe nichts an den Einstellungen verändert oder sonstiges gemacht - alles belassen seit der erfolgreichen Lösung.

Hoffe es gibt nochmal den vergangenen Erfolg - Danke schon mal vorab!

lg, Manuel

Hi,dann zeige mal die Ausgaben von

/opt/brother/scanner/brscan4/brsaneconfig4 -d

sowie

export SANE_DEBUG_DLL=255 && scanimage -L

😀 ...schön dich wieder zu sehen 😉

/opt/brother/scanner/brscan4/brsaneconfig4 -d

manuel@manuel-Aspire-E5-575G:~$ /opt/brother/scanner/brscan4/brsaneconfig4 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb5 during installation
UUID=d83e40e1-545c-423f-b266-d0c228761d3e /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb1 during installation
UUID=88EF-7A9C  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sdb6 during installation
UUID=1a458cd6-c305-4f6e-a32c-9478bab12054 none            swap    sw              0       0
/dev/disk/by-uuid/3E80F65680F613DD /mnt/3E80F65680F613DD auto nosuid,nodev,nofail,x-gvfs-show 0 0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x05e3/0x0612 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x04f2/0xb573 at 001:006: Access denied (insufficient permissions)
could not open USB device 0x04ca/0x3015 at 001:005: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc05a at 001:007: Access denied (insufficient permissions)
could not open USB device 0x090c/0x1000 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0610 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden
-----------------------------
scanimage -L
device `brother4:net1;dev0' is a Brother Wlan-Scanner-Brother MFC-J4410DW
device `hpaio:/net/Officejet_6500_E710n-z?ip=192.168.178.37' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
-----------------------------
-----------------------------
/etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg:
-----------------------------
/etc/opt/brother/scanner/brscan4//Brsane4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_17.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_22.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_2.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_13.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_8.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_1.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_10.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_20.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_16.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_3.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_9.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_21.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_14.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_7.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_11.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_19.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_6.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_18.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_15.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_5.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_12.ini:
-----------------------------
-----------------------------
ping
test Wlan-Scanner-Brother
ping 192.168.000.004 -w 10

PING 192.168.000.004 (192.168.0.4) 56(84) bytes of data.
64 bytes from 192.168.0.4: icmp_seq=1 ttl=64 time=0.019 ms
64 bytes from 192.168.0.4: icmp_seq=2 ttl=64 time=0.142 ms
64 bytes from 192.168.0.4: icmp_seq=3 ttl=64 time=0.207 ms
64 bytes from 192.168.0.4: icmp_seq=4 ttl=64 time=0.018 ms
64 bytes from 192.168.0.4: icmp_seq=5 ttl=64 time=0.016 ms
64 bytes from 192.168.0.4: icmp_seq=6 ttl=64 time=0.019 ms
64 bytes from 192.168.0.4: icmp_seq=7 ttl=64 time=0.018 ms
64 bytes from 192.168.0.4: icmp_seq=8 ttl=64 time=0.032 ms
64 bytes from 192.168.0.4: icmp_seq=9 ttl=64 time=0.016 ms
64 bytes from 192.168.0.4: icmp_seq=10 ttl=64 time=0.032 ms

--- 192.168.000.004 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9218ms
rtt min/avg/max/mdev = 0.016/0.051/0.207/0.063 ms
manuel@manuel-Aspire-E5-575G:~$ 

export SANE_DEBUG_DLL=255 && scanimage -L

manuel@manuel-Aspire-E5-575G:~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] add_backend: adding backend `brother4'
[dll] sane_get_devices
[dll] load: searching backend `brother4' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother4.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother4.so.1'
[dll] init: initializing backend `brother4'
[dll] init: backend `brother4' is version 1.0.1
[dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.3
[dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2511
[dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.133
[dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.0
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.31
[dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.3
[dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.56
[dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 2 devices
device `brother4:net1;dev0' is a Brother Wlan-Scanner-Brother MFC-J4410DW
device `hpaio:/net/Officejet_6500_E710n-z?ip=192.168.178.37' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `brother4's exit function
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
manuel@manuel-Aspire-E5-575G:~$ 

lg

Wir probieren mal

echo -e "net1" | sudo tee -a /etc/sane.d/dll.conf

Danach Scann-Versuche mit

scanimage --device brother4:net1;dev0;ip=192.168.000.004 --format=ppm >test.ppm
scanimage --device brother4:/net1/Wlan-Scanner-Brother/ip=192.168.000.004 --format=ppm >test1.ppm

Die Bilder sollten dann im Home Ordner liegen (test und test1).Zeige die Ausgaben. Der HP Funktioniert?

OK, folgendes gemacht...

manuel@manuel-Aspire-E5-575G:~$ echo -e "net1" | sudo tee -a /etc/sane.d/dll.conf
[sudo] Passwort für manuel: 
net1
manuel@manuel-Aspire-E5-575G:~$ echo -e "net1" | sudo tee -a /etc/sane.d/dll.conf
net1
manuel@manuel-Aspire-E5-575G:~$ scanimage --device brother4:net1;dev0;ip=192.168.000.004 --format=ppm >test.ppm
scanimage: open of device brother4:net1 failed: Invalid argument
dev0: Befehl nicht gefunden.
--format=ppm: Befehl nicht gefunden.
manuel@manuel-Aspire-E5-575G:~$ scanimage --device brother4:/net1/Wlan-Scanner-Brother/ip=192.168.000.004 --format=ppm >test1.ppm
scanimage: open of device brother4:/net1/Wlan-Scanner-Brother/ip=192.168.000.004 failed: Invalid argument
manuel@manuel-Aspire-E5-575G:~$ 

...passiert ist nichts und "test" und "test1" liegen im Home-Ordner mit '0 Bytes'

Habe im Anschluss einen Scan-Test durchgeführt, animierter "Lade-Status" wird in Endlosschleife angezeigt - tut sich aber nichts - nach langer Zeit "Verbindung zum Scanner konnte nicht hergestellt werden".

Keine Ahnung, ob der HP noch funktioniert, der steht bei meiner Ex. 😉 ...hatte aber aber bis Dato keine Probleme mit dem.

So wie es Aussieht liegt das Problem nicht beim Brother.Wir machen mal folgendes

sudo apt-get install --reinstall sane sane-utils xsane libsane1 

Danach

sudo mv /etc/sane.d/dll.conf /etc/sane.d/dll.conf.bak
echo -e "net" | sudo tee -a /etc/sane.d/dll.conf
echo -e "brother4" | sudo tee -a /etc/sane.d/dll.conf

Neustart.Scanne testen.Ansonsten zeige

export SANE_DEBUG_NET=128 && scanimage -L

scanimage -T

Du bist der BESTE!!! 👍 👍 👍

Scannt wieder! 😀

!!!DANKE DANKE DANKE!!!

Hoffe es beliebt diesmal so.... 😉

Hallo Kellerkind_2009

Bin mal wieder am verzweifeln mit dem Scanner - Verbindung ist da, druckt aber sannen will er wieder nicht.... 😬 👿

Vor kurzem gab es das Problom auch schon erneut, bin an dieser Stelle deine letzten Anweisungen durchgegnagen und siehe da, es hatte wieder funktioniert. Diesmal den letzten Schritt von dir ca 10x wiederholt und es tut sich leider nix...

Gebe dir daher die letzten Daten vom letzten Beitrag durch...

sudo apt-get install --reinstall sane sane-utils xsane libsane1

manuel@manuel-Aspire-E5-575G:~$ sudo apt-get install --reinstall sane sane-utils xsane libsane1 
[sudo] Passwort für manuel: 
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 4 erneut installiert, 0 zu entfernen und 26 nicht aktualisiert.
Es müssen noch 0 B von 2.644 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
Vorkonfiguration der Pakete ...
(Lese Datenbank ... 237870 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libsane1_1.0.27-1~experimental3ubuntu2_amd64.deb ...
Entpacken von libsane1:amd64 (1.0.27-1~experimental3ubuntu2) über (1.0.27-1~experimental3ubuntu2) ...
Vorbereitung zum Entpacken von .../sane_1.0.14-12build1_amd64.deb ...
Entpacken von sane (1.0.14-12build1) über (1.0.14-12build1) ...
Vorbereitung zum Entpacken von .../sane-utils_1.0.27-1~experimental3ubuntu2_amd64.deb ...
Entpacken von sane-utils (1.0.27-1~experimental3ubuntu2) über (1.0.27-1~experimental3ubuntu2) ...
Vorbereitung zum Entpacken von .../xsane_0.999-5ubuntu2_amd64.deb ...
Entpacken von xsane (0.999-5ubuntu2) über (0.999-5ubuntu2) ...
Trigger für mime-support (3.60ubuntu1) werden verarbeitet ...
Trigger für ureadahead (0.100.0-20) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
Trigger für desktop-file-utils (0.23-1ubuntu3.18.04.2) werden verarbeitet ...
Trigger für bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu1) werden verarbeitet ...
Rebuilding /usr/share/applications/bamf-2.index...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
Trigger für udev (237-3ubuntu10.11) werden verarbeitet ...
Trigger für systemd (237-3ubuntu10.11) werden verarbeitet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
libsane1:amd64 (1.0.27-1~experimental3ubuntu2) wird eingerichtet ...
Trigger für gnome-menus (3.13.3-11ubuntu1.1) werden verarbeitet ...
Trigger für hicolor-icon-theme (0.17-2) werden verarbeitet ...
sane-utils (1.0.27-1~experimental3ubuntu2) wird eingerichtet ...
xsane (0.999-5ubuntu2) wird eingerichtet ...
sane (1.0.14-12build1) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
manuel@manuel-Aspire-E5-575G:~$

sudo mv /etc/sane.d/dll.conf /etc/sane.d/dll.conf.bak echo -e "net" | sudo tee -a /etc/sane.d/dll.conf echo -e "brother4" | sudo tee -a /etc/sane.d/dll.conf

manuel@manuel-Aspire-E5-575G:~$ sudo mv /etc/sane.d/dll.conf /etc/sane.d/dll.conf.bak
manuel@manuel-Aspire-E5-575G:~$ echo -e "net" | sudo tee -a /etc/sane.d/dll.confnet
manuel@manuel-Aspire-E5-575G:~$ echo -e "brother4" | sudo tee -a /etc/sane.d/dll.conf
brother4
manuel@manuel-Aspire-E5-575G:~$

export SANE_DEBUG_NET=128 && scanimage -L

manuel@manuel-Aspire-E5-575G:~$ export SANE_DEBUG_NET=128 && scanimage -L
[sanei_debug] Setting debug level of net to 128.
[net] sane_init: authorize != null, version_code != null
[net] sane_init: SANE net backend version 1.0.14 (AF-indep+IPv6) from sane-backends 1.0.27
[net] sane_init: Client has little endian byte order
[net] sane_init: searching for config file
[net] sane_init: done reading config
[net] sane_init: evaluating environment variable SANE_NET_HOSTS
[net] sane_init: evaluating environment variable SANE_NET_TIMEOUT
[net] sane_init: done
[net] sane_get_devices: local_only = 0
[net] sane_get_devices: finished (0 devices)
[net] net_avahi_browse_callback: CACHE_EXHAUSTED
[net] net_avahi_browse_callback: ALL_FOR_NOW
device `brother4:net1;dev0' is a Brother Wlan-Scanner-Brother MFC-J4410DW
device `hpaio:/net/Officejet_6500_E710n-z?ip=192.168.178.37' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
[net] sane_exit: exiting
[net] net_avahi_cleanup: stopping thread
[net] net_avahi_cleanup: done
[net] sane_exit: finished.
manuel@manuel-Aspire-E5-575G:~$

scanimage -T

manuel@manuel-Aspire-E5-575G:~$ scanimage -T
[sanei_debug] Setting debug level of net to 128.
[net] sane_init: authorize != null, version_code != null
[net] sane_init: SANE net backend version 1.0.14 (AF-indep+IPv6) from sane-backends 1.0.27
[net] sane_init: Client has little endian byte order
[net] sane_init: searching for config file
[net] sane_init: done reading config
[net] sane_init: evaluating environment variable SANE_NET_HOSTS
[net] sane_init: evaluating environment variable SANE_NET_TIMEOUT
[net] sane_init: done
[net] sane_get_devices: local_only = 0
[net] sane_get_devices: finished (0 devices)
[net] net_avahi_browse_callback: CACHE_EXHAUSTED
[net] net_avahi_browse_callback: ALL_FOR_NOW
scanimage: open of device brother4:net1;dev0 failed: Invalid argument
[net] sane_exit: exiting
[net] net_avahi_cleanup: stopping thread
[net] net_avahi_cleanup: done
[net] sane_exit: finished.
manuel@manuel-Aspire-E5-575G:~$ 

...hoffe, es gibt noch eine hilfreiche Option. 🙄

lg

Ich gebe mir Mühe 😉 Hier hast du ein Schnitzer rein gebracht

manuel@manuel-Aspire-E5-575G:~$ sudo mv /etc/sane.d/dll.conf /etc/sane.d/dll.conf.bak
manuel@manuel-Aspire-E5-575G:~$ echo -e "net" | sudo tee -a /etc/sane.d/dll.confnet
manuel@manuel-Aspire-E5-575G:~$ echo -e "brother4" | sudo tee -a /etc/sane.d/dll.conf

Führe aus

echo -e "net" | sudo tee -a /etc/sane.d/dll.conf
sudo rm /etc/sane.d/dll.confnet

Falls noch nicht Funktioniert zeige

cat /etc/sane.d/dll.conf

und

/opt/brother/scanner/brscan4/brsaneconfig4 -d

systemctl --no-pager status sane*

Tja was soll ich sagen - Du hast es mal wieder geschafft! Dickes DANKE!!!! 👍 👍 👍

echo -e "net" | sudo tee -a /etc/sane.d/dll.conf sudo rm /etc/sane.d/dll.confnet

manuel@manuel-Aspire-E5-575G:~$ echo -e "net" | sudo tee -a /etc/sane.d/dll.conf[sudo] Passwort für manuel: 
net
manuel@manuel-Aspire-E5-575G:~$ sudo rm /etc/sane.d/dll.confnet
rm: das Entfernen von '/etc/sane.d/dll.confnet' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
manuel@manuel-Aspire-E5-575G:~$ 

Keine Ahnung wie ich dir DAS erklären soll, aber der Scanner will wieder nicht...... 😲

Ich habe dies nochmal durch geführt... https://forum.ubuntuusers.de/post/9029015/

...und dann das...

Kellerkind_2009 schrieb:

}}} Führe aus

echo -e "net" | sudo tee -a /etc/sane.d/dll.conf
sudo rm /etc/sane.d/dll.confnet

...aber alles half nix. ☹

Kellerkind_2009 schrieb:

Falls noch nicht Funktioniert zeige

cat /etc/sane.d/dll.conf

und

/opt/brother/scanner/brscan4/brsaneconfig4 -d

systemctl --no-pager status sane*

...ich mache an der Stelle weiter:

cat /etc/sane.d/dll.conf

manuel@manuel-Aspire-E5-575G:~$ cat /etc/sane.d/dll.conf
net
brother4
net
net
manuel@manuel-Aspire-E5-575G:~$ 

/opt/brother/scanner/brscan4/brsaneconfig4 -d

manuel@manuel-Aspire-E5-575G:~$ /opt/brother/scanner/brscan4/brsaneconfig4 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb5 during installation
UUID=d83e40e1-545c-423f-b266-d0c228761d3e /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb1 during installation
UUID=88EF-7A9C  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sdb6 during installation
UUID=1a458cd6-c305-4f6e-a32c-9478bab12054 none            swap    sw              0       0

/dev/disk/by-uuid/3E80F65680F613DD /mnt/3E80F65680F613DD auto nosuid,nodev,nofail,x-gvfs-show 0 0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x05e3/0x0612 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x04f2/0xb573 at 001:007: Access denied (insufficient permissions)
could not open USB device 0x04ca/0x3015 at 001:005: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc05a at 001:003: Access denied (insufficient permissions)
could not open USB device 0x090c/0x1000 at 001:006: Access denied (insufficient permissions)
could not open USB device 0x058f/0x6387 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0610 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden
-----------------------------
scanimage -L
device `brother4:net1;dev0' is a Brother Wlan-Scanner-Brother MFC-J4410DW
device `hpaio:/net/Officejet_6500_E710n-z?ip=192.168.178.37' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
-----------------------------
-----------------------------
/etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg:
-----------------------------
/etc/opt/brother/scanner/brscan4//Brsane4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_17.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_22.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_2.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_13.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_8.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_1.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_10.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_20.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_16.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_3.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_9.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_21.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_14.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_7.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_11.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_19.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_6.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_18.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_15.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_5.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_12.ini:
-----------------------------
-----------------------------
ping
test Wlan-Scanner-Brother
ping 192.168.000.004 -w 10

PING 192.168.000.004 (192.168.0.4) 56(84) bytes of data.
64 bytes from 192.168.0.4: icmp_seq=1 ttl=64 time=0.022 ms
64 bytes from 192.168.0.4: icmp_seq=2 ttl=64 time=0.032 ms
64 bytes from 192.168.0.4: icmp_seq=3 ttl=64 time=0.035 ms
64 bytes from 192.168.0.4: icmp_seq=4 ttl=64 time=0.033 ms
64 bytes from 192.168.0.4: icmp_seq=5 ttl=64 time=0.042 ms
64 bytes from 192.168.0.4: icmp_seq=6 ttl=64 time=0.041 ms
64 bytes from 192.168.0.4: icmp_seq=7 ttl=64 time=0.050 ms
64 bytes from 192.168.0.4: icmp_seq=8 ttl=64 time=0.031 ms
64 bytes from 192.168.0.4: icmp_seq=9 ttl=64 time=0.035 ms
64 bytes from 192.168.0.4: icmp_seq=10 ttl=64 time=0.039 ms

--- 192.168.000.004 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9203ms
rtt min/avg/max/mdev = 0.022/0.036/0.050/0.007 ms
manuel@manuel-Aspire-E5-575G:~$ 

systemctl --no-pager status sane*

manuel@manuel-Aspire-E5-575G:~$ systemctl --no-pager status sane*
manuel@manuel-Aspire-E5-575G:~$ 

lg

Starte saned mal mit

sudo systemctl start saned.socket

Probiere zu Scannen und zeige wieder

systemctl --no-pager status sane*

systemctl list-unit-files | grep sane

sudo systemctl start saned.socket

manuel@manuel-Aspire-E5-575G:~$ sudo systemctl start saned.socket
[sudo] Passwort für manuel: 
manuel@manuel-Aspire-E5-575G:~$

Nix passiert - "Verbindung zum Scanner konnte nicht hergestellt werden"

systemctl --no-pager status sane*

manuel@manuel-Aspire-E5-575G:~$ systemctl --no-pager status sane*
● saned.socket - saned incoming socket
   Loaded: loaded (/lib/systemd/system/saned.socket; disabled; vendor preset: enabled)
   Active: active (listening) since Wed 2019-01-23 12:33:16 CET; 45s ago
   Listen: [::]:6566 (Stream)
 Accepted: 0; Connected: 0
    Tasks: 0 (limit: 4915)
   CGroup: /system.slice/saned.socket

Jan 23 12:33:16 manuel-Aspire-E5-575G systemd[1]: Listening on saned incoming…t.
Hint: Some lines were ellipsized, use -l to show in full.
manuel@manuel-Aspire-E5-575G:~$

systemctl list-unit-files | grep sane

manuel@manuel-Aspire-E5-575G:~$ systemctl list-unit-files | grep sane
saned.service                                                    masked         
saned@.service                                                   indirect       
saned.socket                                                     disabled       
manuel@manuel-Aspire-E5-575G:~$ 

Saned ist disabled

   Loaded: loaded (/lib/systemd/system/saned.socket; disabled; vendor preset: enabled)

Mal aktivieren mit

sudo systemctl enable saned.socket

Neustart.Scannen Testen.Ist aber merkwürdig das ganze weil soweit eigentlich alles i.O. ist 😕

/opt/brother/scanner/brscan4/brsaneconfig4 -d
scanimage -L
device `brother4:net1;dev0' is a Brother Wlan-Scanner-Brother MFC-J4410DW
PING 192.168.000.004 (192.168.0.4) 56(84) bytes of data.
64 bytes from 192.168.0.4: icmp_seq=1 ttl=64 time=0.022 ms

--- 192.168.000.004 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9203ms
rtt min/avg/max/mdev = 0.022/0.036/0.050/0.007 ms
manuel@manuel-Aspire-E5-575G:~$ 

Das einzige was noch sein könnte ist

PING 192.168.000.004 (192.168.0.4)

Wie ist die genaue IP des Gerätes? Zeige auch mal

cat /opt/brother/scanner/brscan4/brsanenetdevice4.cfg

Mal aktivieren mit

   Loaded: loaded (/lib/systemd/system/saned.socket; disabled; vendor preset: enabled) 

..hat leider nix begracht. ☹

Ist aber merkwürdig das ganze weil soweit eigentlich alles i.O. ist 😕

Absolut merkwürdig!! So mal Du schon 3x das Problem gelöst hast und es sich immer wieder erneut plötzlich verweigert!! 😠

Drucken funktioniert nach wie vor. Warum funktioniert der Scanner nach deinen Anweisungen und auf einmal, ohne meinen Einfluss, dann wieder nicht mehr?? 😐

Wie ist die genaue IP des Gerätes? Zeige auch mal

manuel@manuel-Aspire-E5-575G:~$ cat /opt/brother/scanner/brscan4/brsanenetdevice4.cfg
DEVICE=Wlan-Scanner-Brother , "MFC-J4410DW" , 0x4f9:0x2c4 , NODENAME=192.168.000.004 

manuel@manuel-Aspire-E5-575G:~$