Wer kann Bitte Hilfen.
HUAWEI E3531 Installieren und Einrichten.
Ubuntu 18.04 Mate
Ich habe diesen Surf Stick HUAWEI E3531 für 29.95 Euro gekauft
Ich versuche es seit 6 Stunden zu Installieren und zu einrichten.
https://wiki.ubuntuusers.de/USB_ModeSwitch/
Der wird nicht als Datentrager USB in Dateimanager auf geführt.
lsusb
mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$
usb-devices
mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1a.7 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14dc Rev=01.02 S: Manufacturer=HUAWEI S: Product=HUAWEI Mobile C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1a.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=0024 Rev=01.30 S: Manufacturer=CHICONY S: Product=HP Basic USB Keyboard C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1a.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0461 ProdID=4d15 Rev=02.00 S: Product=USB Optical Mouse C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$
Wer kann Bitte Hilfen.
nmcli dev
mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ nmcli dev DEVICE TYPE STATE CONNECTION enx001e101f0000 ethernet verbunden Auto-Ethernet enp0s25 ethernet nicht verfügbar -- lo loopback nicht verwaltet -- mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$
mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1a.7 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14dc Rev=01.02 S: Manufacturer=HUAWEI S: Product=HUAWEI Mobile C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1a.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=0024 Rev=01.30 S: Manufacturer=CHICONY S: Product=HP Basic USB Keyboard C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1a.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=04.15 S: Manufacturer=Linux 4.15.0-23-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0461 ProdID=4d15 Rev=02.00 S: Product=USB Optical Mouse C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsmod | grep usbserial usbserial 45056 2 option,usb_wwan mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo usb_modeswitch [sudo] Passwort für mimoun: Usage: usb_modeswitch [<params>] [-c filename] -h, --help this help -e, --version print version information and exit -j, --find-mbim return config no. with MBIM interface, exit -v, --default-vendor NUM vendor ID of original mode (mandatory) -p, --default-product NUM product ID of original mode (mandatory) -V, --target-vendor NUM target mode vendor ID (optional) -P, --target-product NUM target mode product ID (optional) -C, --target-class NUM target mode device class (optional) -b, --bus-num NUM system bus number of device (for hard ID) -g, --device-num NUM system device number (for hard ID) -m, --message-endpoint NUM direct the message transfer there (optional) -M, --message-content <msg> message to send (hex number as string) -2, --message-content2 <msg> additional messages to send (-n recommended) -3, --message-content3 <msg> additional messages to send (-n recommended) -w, --release-delay NUM wait NUM ms before releasing the interface -n, --need-response obsolete, no effect (always on) -r, --response-endpoint NUM read response from there (optional) -K, --std-eject send standard EJECT sequence -d, --detach-only detach the active driver, no further action -H, --huawei-mode apply a special procedure -J, --huawei-new-mode apply a special procedure -X, --huawei-alt-mode apply a special procedure -S, --sierra-mode apply a special procedure -O, --sony-mode apply a special procedure -G, --gct-mode apply a special procedure -N, --sequans-mode apply a special procedure -A, --mobileaction-mode apply a special procedure -T, --kobil-mode apply a special procedure -L, --cisco-mode apply a special procedure -B, --qisda-mode apply a special procedure -E, --quanta-mode apply a special procedure -F, --pantech-mode NUM apply a special procedure, pass NUM through -Z, --blackberry-mode apply a special procedure -U, --option-mode apply a special procedure -R, --reset-usb reset the device after all other actions -Q, --quiet don't show progress or error messages -W, --verbose print all settings and debug output -D, --sysmode specific result and syslog message -s, --check-success <seconds> switching result check with timeout -I, --inquire obsolete, no effect -c, --config-file <filename> load long configuration from file -t, --stdinput read long configuration from stdin -f, --long-config <text> get long configuration from string -i, --interface NUM select initial USB interface (default 0) -u, --configuration NUM select USB configuration -a, --altsetting NUM select alternative USB interface setting * usb_modeswitch: handle USB devices with multiple modes * Version 2.5.2 (C) Josua Dietze 2017 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo usb_modeswitch Usage: usb_modeswitch [<params>] [-c filename] -h, --help this help -e, --version print version information and exit -j, --find-mbim return config no. with MBIM interface, exit -v, --default-vendor NUM vendor ID of original mode (mandatory) -p, --default-product NUM product ID of original mode (mandatory) -V, --target-vendor NUM target mode vendor ID (optional) -P, --target-product NUM target mode product ID (optional) -C, --target-class NUM target mode device class (optional) -b, --bus-num NUM system bus number of device (for hard ID) -g, --device-num NUM system device number (for hard ID) -m, --message-endpoint NUM direct the message transfer there (optional) -M, --message-content <msg> message to send (hex number as string) -2, --message-content2 <msg> additional messages to send (-n recommended) -3, --message-content3 <msg> additional messages to send (-n recommended) -w, --release-delay NUM wait NUM ms before releasing the interface -n, --need-response obsolete, no effect (always on) -r, --response-endpoint NUM read response from there (optional) -K, --std-eject send standard EJECT sequence -d, --detach-only detach the active driver, no further action -H, --huawei-mode apply a special procedure -J, --huawei-new-mode apply a special procedure -X, --huawei-alt-mode apply a special procedure -S, --sierra-mode apply a special procedure -O, --sony-mode apply a special procedure -G, --gct-mode apply a special procedure -N, --sequans-mode apply a special procedure -A, --mobileaction-mode apply a special procedure -T, --kobil-mode apply a special procedure -L, --cisco-mode apply a special procedure -B, --qisda-mode apply a special procedure -E, --quanta-mode apply a special procedure -F, --pantech-mode NUM apply a special procedure, pass NUM through -Z, --blackberry-mode apply a special procedure -U, --option-mode apply a special procedure -R, --reset-usb reset the device after all other actions -Q, --quiet don't show progress or error messages -W, --verbose print all settings and debug output -D, --sysmode specific result and syslog message -s, --check-success <seconds> switching result check with timeout -I, --inquire obsolete, no effect -c, --config-file <filename> load long configuration from file -t, --stdinput read long configuration from stdin -f, --long-config <text> get long configuration from string -i, --interface NUM select initial USB interface (default 0) -u, --configuration NUM select USB configuration -a, --altsetting NUM select alternative USB interface setting * usb_modeswitch: handle USB devices with multiple modes * Version 2.5.2 (C) Josua Dietze 2017 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb | grep -i 12d1 Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsmod | grep usbserial usbserial 45056 2 option,usb_wwan mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe usbserial vendor=0x12d1 product=0x14dc mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe -r option mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb | grep -i 12d1 Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsmod | grep usbserial mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe usbserial vendor=0x12d1 product=0x14dc mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsmod | grep usbserial usbserial 45056 0 mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ ls /dev/ | grep ttyUSB mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe -r usbserial mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ ls /dev/ | grep ttyUSB mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo usb_modeswitch -v 12d1 -p 14dc -R Look for default devices ... Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... Current configuration number is 1 Use interface number 0 with class 2 Warning: no switching method given. See documentation Reset USB device . Device was reset -> Run lsusb to note any changes. Bye! mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb | grep -i 12d1 Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsmod | grep usbserial mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe usbserial vendor=0x12d1 product=0x14dc mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe -r option mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsmod | grep usbserial usbserial 45056 0 mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ ls /dev/ | grep ttyUSB mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe -r usbserial mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ ls /dev/ | grep ttyUSB mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo modprobe -r usbserial mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ sudo usb_modeswitch -v 12d1 -p 14dc -R Look for default devices ... Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... Current configuration number is 1 Use interface number 0 with class 2 Warning: no switching method given. See documentation Reset USB device . Device was reset -> Run lsusb to note any changes. Bye! mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 12d1:14dc Huawei Technologies Co., Ltd. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$ mimoun@mimoun:~$
Wer kann Bitte Hilfen.