staging.inyokaproject.org

Hallo, ich habe mir vor einigen Wochen den Samsung Xpress C480W Mulitfunktionsdrucker gekauft und auch die entsprechenden Treiber installiert. Daraufhin druckte der Drucker ohne irgendwelche Probleme (außer dass er sich dabei sehr viel Zeit zum Starten ließ), aber er wurde nicht als Scanner bei XSane und Simple Scan erkannt. Ich habe nach langem Suche dann folgendes gemacht: in /etc/sane.d/xerox_mtp.conf die Zeilen: #Samsung C480 Series und in der zweiten Zeile: tcp 192.168.178.24 hinzgefügt.

Seitdem wird der Scanner von Xsane und Simple Scan erkannt aber beim Versuch zu scannen stürzen die Programme grundsätzlich ab, während der Scanner blinkt und im Display: Scanning... anzeigt.

Es wäre schön, wenn jemand mir helfen könnte.

Vielen Dank im voraus,

Mirek

Willkommen im Forum 😉 Den Eintrag in der /etc/sane.d/xerox_mtp.conf wieder Rückgängig machen und dann den Link für die Treiber setzen

sudo ln -sf /usr/lib/sane/libsane-smfp.so* /usr/lib/x86_64-linux-gnu/sane/

Bei Problemen zeige mal

export SANE_DEBUG_DLL=255 && scanimage -L

id

Hallo Kellerkind, vielen Dank für Deine Antwort. Du scheinst ja bei Druck- und Scanproblemen ja hier der Experte zu sein.

hier die Ausgabe von export SANE_DEBUG_DLL=255 && scanimage -L

[sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27git [dll] sane_init/read_dlld: attempting to open directory ./dll.d' [dll] sane_init/read_dlld: attempting to open directory /etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory /etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend ls5000' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend net' [dll] add_backend: adding backend abaton' [dll] add_backend: adding backend agfafocus' [dll] add_backend: adding backend apple' [dll] add_backend: adding backend avision' [dll] add_backend: adding backend artec' [dll] add_backend: adding backend artec_eplus48u' [dll] add_backend: adding backend as6e' [dll] add_backend: adding backend bh' [dll] add_backend: adding backend canon' [dll] add_backend: adding backend canon630u' [dll] add_backend: adding backend canon_dr' [dll] add_backend: adding backend cardscan' [dll] add_backend: adding backend coolscan' [dll] add_backend: adding backend coolscan3' [dll] add_backend: adding backend dell1600n_net' [dll] add_backend: adding backend dmc' [dll] add_backend: adding backend epjitsu' [dll] add_backend: adding backend epson2' [dll] add_backend: adding backend epsonds' [dll] add_backend: adding backend fujitsu' [dll] add_backend: adding backend genesys' [dll] add_backend: adding backend gt68xx' [dll] add_backend: adding backend hp' [dll] add_backend: adding backend hp3900' [dll] add_backend: adding backend hpsj5s' [dll] add_backend: adding backend hp3500' [dll] add_backend: adding backend hp4200' [dll] add_backend: adding backend hp5400' [dll] add_backend: adding backend hp5590' [dll] add_backend: adding backend hpljm1005' [dll] add_backend: adding backend hs2p' [dll] add_backend: adding backend ibm' [dll] add_backend: adding backend kodak' [dll] add_backend: adding backend kodakaio' [dll] add_backend: adding backend kvs1025' [dll] add_backend: adding backend kvs20xx' [dll] add_backend: adding backend leo' [dll] add_backend: adding backend lexmark' [dll] add_backend: adding backend ma1509' [dll] add_backend: adding backend magicolor' [dll] add_backend: adding backend matsushita' [dll] add_backend: adding backend microtek' [dll] add_backend: adding backend microtek2' [dll] add_backend: adding backend mustek' [dll] add_backend: adding backend mustek_usb' [dll] add_backend: adding backend mustek_usb2' [dll] add_backend: adding backend nec' [dll] add_backend: adding backend niash' [dll] add_backend: adding backend pie' [dll] add_backend: adding backend pint' [dll] add_backend: adding backend pixma' [dll] add_backend: adding backend plustek' [dll] add_backend: adding backend qcam' [dll] add_backend: adding backend ricoh' [dll] add_backend: adding backend rts8891' [dll] add_backend: adding backend s9036' [dll] add_backend: adding backend sceptre' [dll] add_backend: adding backend sharp' [dll] add_backend: adding backend sm3600' [dll] add_backend: adding backend sm3840' [dll] add_backend: adding backend snapscan' [dll] add_backend: adding backend sp15c' [dll] add_backend: adding backend tamarack' [dll] add_backend: adding backend teco1' [dll] add_backend: adding backend teco2' [dll] add_backend: adding backend teco3' [dll] add_backend: adding backend u12' [dll] add_backend: adding backend umax' [dll] add_backend: adding backend umax1220u' [dll] add_backend: adding backend v4l' [dll] add_backend: adding backend xerox_mfp' [dll] add_backend: adding backend smfp' [dll] sane_get_devices [dll] load: searching backend smfp' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-smfp.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-smfp.so.1' [dll] init: initializing backend smfp' [dll] init: backend smfp' is version 1.0.1 [dll] load: searching backend xerox_mfp' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend xerox_mfp' [dll] init: backend xerox_mfp' is version 1.0.13 [dll] load: searching backend v4l' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [dll] load: couldn't open /usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [dll] load: couldn't find backend v4l' (No such file or directory) [dll] load: searching backend umax1220u' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend umax1220u' [dll] init: backend umax1220u' is version 1.0.2 [dll] load: searching backend umax' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend umax' [dll] init: backend umax' is version 1.0.45 [dll] load: searching backend u12' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend u12' [dll] init: backend u12' is version 1.0.0 [dll] load: searching backend teco3' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend teco3' [dll] init: backend teco3' is version 1.0.1 [dll] load: searching backend teco2' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend teco2' [dll] init: backend teco2' is version 1.0.10 [dll] load: searching backend teco1' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend teco1' [dll] init: backend teco1' is version 1.0.10 [dll] load: searching backend tamarack' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend tamarack' [dll] init: backend tamarack' is version 1.0.0 [dll] load: searching backend sp15c' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend sp15c' [dll] init: backend sp15c' is version 1.0.0 [dll] load: searching backend snapscan' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend snapscan' [dll] init: backend snapscan' is version 1.4.53 [dll] load: searching backend sm3840' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend sm3840' [dll] init: backend sm3840' is version 1.0.0 [dll] load: searching backend sm3600' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend sm3600' [dll] init: backend sm3600' is version 1.0.6 [dll] load: searching backend sharp' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend sharp' [dll] init: backend sharp' is version 1.0.0 [dll] load: searching backend sceptre' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend sceptre' [dll] init: backend sceptre' is version 1.0.10 [dll] load: searching backend s9036' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend s9036' [dll] init: backend s9036' is version 1.0.0 [dll] load: searching backend rts8891' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend rts8891' [dll] init: backend rts8891' is version 1.0.2401 [dll] load: searching backend ricoh' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend ricoh' [dll] init: backend ricoh' is version 1.0.0 [dll] load: searching backend qcam' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend qcam' [dll] init: backend qcam' is version 1.0.0 [dll] load: searching backend plustek' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend plustek' [dll] init: backend plustek' is version 1.0.0 [dll] load: searching backend pixma' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend pixma' [dll] init: backend pixma' is version 1.0.18 [dll] load: searching backend pint' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [dll] load: couldn't open /usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [dll] load: couldn't find backend pint' (No such file or directory) [dll] load: searching backend pie' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend pie' [dll] init: backend pie' is version 1.0.9 [dll] load: searching backend niash' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend niash' [dll] init: backend niash' is version 1.0.1 [dll] load: searching backend nec' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend nec' [dll] init: backend nec' is version 1.0.0 [dll] load: searching backend mustek_usb2' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend mustek_usb2' [dll] init: backend mustek_usb2' is version 1.0.10 [dll] load: searching backend mustek_usb' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend mustek_usb' [dll] init: backend mustek_usb' is version 1.0.18 [dll] load: searching backend mustek' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend mustek' [dll] init: backend mustek' is version 1.0.138 [dll] load: searching backend microtek2' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend microtek2' [dll] init: backend microtek2' is version 1.0.0 [dll] load: searching backend microtek' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend microtek' [dll] init: backend microtek' is version 1.0.0 [dll] load: searching backend matsushita' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend matsushita' [dll] init: backend matsushita' is version 1.0.7 [dll] load: searching backend magicolor' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend magicolor' [dll] init: backend magicolor' is version 1.0.1 [dll] load: searching backend ma1509' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend ma1509' [dll] init: backend ma1509' is version 1.0.3 [dll] load: searching backend lexmark' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend lexmark' [dll] init: backend lexmark' is version 1.0.32 [dll] load: searching backend leo' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend leo' [dll] init: backend leo' is version 1.0.11 [dll] load: searching backend kvs20xx' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend kvs20xx' [dll] init: backend kvs20xx' is version 1.0.2 [dll] load: searching backend kvs1025' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend kvs1025' [dll] init: backend kvs1025' is version 1.0.5 [dll] load: searching backend kodakaio' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [dll] init: initializing backend kodakaio' [dll] init: backend kodakaio' is version 1.0.3 [dll] load: searching backend kodak' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend kodak' [dll] init: backend kodak' is version 1.0.7 [dll] load: searching backend ibm' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend ibm' [dll] init: backend ibm' is version 1.0.0 [dll] load: searching backend hs2p' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend hs2p' [dll] init: backend hs2p' is version 1.0.0 [dll] load: searching backend hpljm1005' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend hpljm1005' [dll] init: backend hpljm1005' is version 1.0.1 [dll] load: searching backend hp5590' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend hp5590' [dll] init: backend hp5590' is version 1.0.7 [dll] load: searching backend hp5400' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend hp5400' [dll] init: backend hp5400' is version 1.0.3 [dll] load: searching backend hp4200' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend hp4200' [dll] init: backend hp4200' is version 1.0.0 [dll] load: searching backend hp3500' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend hp3500' [dll] init: backend hp3500' is version 1.0.0 [dll] load: searching backend hpsj5s' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend hpsj5s' [dll] init: backend hpsj5s' is version 1.0.3 [dll] load: searching backend hp3900' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend hp3900' [dll] init: backend hp3900' is version 1.0.0 [dll] load: searching backend hp' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend hp' [dll] init: backend hp' is version 1.0.8 [dll] load: searching backend gt68xx' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend gt68xx' [dll] init: backend gt68xx' is version 1.0.84 [dll] load: searching backend genesys' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend genesys' [dll] init: backend genesys' is version 1.0.2511 [dll] load: searching backend fujitsu' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend fujitsu' [dll] init: backend fujitsu' is version 1.0.133 [dll] load: searching backend epsonds' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [dll] init: initializing backend epsonds' [dll] init: backend epsonds' is version 1.0.0 [dll] load: searching backend epson2' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] init: initializing backend epson2' [dll] init: backend epson2' is version 1.0.124 [dll] load: searching backend epjitsu' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend epjitsu' [dll] init: backend epjitsu' is version 1.0.31 [dll] load: searching backend dmc' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend dmc' [dll] init: backend dmc' is version 1.0.0 [dll] load: searching backend dell1600n_net' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend dell1600n_net' [dll] init: backend dell1600n_net' is version 1.0.0 [dll] load: searching backend coolscan3' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend coolscan3' [dll] init: backend coolscan3' is version 1.0.0 [dll] load: searching backend coolscan' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend coolscan' [dll] init: backend coolscan' is version 1.0.0 [dll] load: searching backend cardscan' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend cardscan' [dll] init: backend cardscan' is version 1.0.3 [dll] load: searching backend canon_dr' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend canon_dr' [dll] init: backend canon_dr' is version 1.0.56 [dll] load: searching backend canon630u' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend canon630u' [dll] init: backend canon630u' is version 1.0.1 [dll] load: searching backend canon' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend canon' [dll] init: backend canon' is version 1.0.0 [dll] load: searching backend bh' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend bh' [dll] init: backend bh' is version 1.0.4 [dll] load: searching backend as6e' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend as6e' [dll] load: searching backend artec_eplus48u' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend artec_eplus48u' [dll] init: backend artec_eplus48u' is version 1.0.0 [dll] load: searching backend artec' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend artec' [dll] init: backend artec' is version 1.0.0 [dll] load: searching backend avision' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend avision' [dll] init: backend avision' is version 1.0.297 [dll] load: searching backend apple' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend apple' [dll] init: backend apple' is version 1.0.0 [dll] load: searching backend agfafocus' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend agfafocus' [dll] init: backend agfafocus' is version 1.0.0 [dll] load: searching backend abaton' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend abaton' [dll] init: backend abaton' is version 1.0.0 [dll] load: searching backend net' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend net' [dll] init: backend net' is version 1.0.27 [dll] load: searching backend ls5000' in /usr/lib/x86_64-linux-gnu/sane' [dll] load: trying to load /usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' [dll] load: dlopen()ing /usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' [dll] init: initializing backend ls5000' [dll] init: backend ls5000' is version 1.0.0 [dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend smfp's exit function [dll] sane_exit: calling backend xerox_mfp's exit function [dll] sane_exit: calling backend umax1220u's exit function [dll] sane_exit: calling backend umax's exit function [dll] sane_exit: calling backend u12's exit function [dll] sane_exit: calling backend teco3's exit function [dll] sane_exit: calling backend teco2's exit function [dll] sane_exit: calling backend teco1's exit function [dll] sane_exit: calling backend tamarack's exit function [dll] sane_exit: calling backend sp15c's exit function [dll] sane_exit: calling backend snapscan's exit function [dll] sane_exit: calling backend sm3840's exit function [dll] sane_exit: calling backend sm3600's exit function [dll] sane_exit: calling backend sharp's exit function [dll] sane_exit: calling backend sceptre's exit function [dll] sane_exit: calling backend s9036's exit function [dll] sane_exit: calling backend rts8891's exit function [dll] sane_exit: calling backend ricoh's exit function [dll] sane_exit: calling backend qcam's exit function [dll] sane_exit: calling backend plustek's exit function [dll] sane_exit: calling backend pixma's exit function [dll] sane_exit: calling backend pie's exit function [dll] sane_exit: calling backend niash's exit function [dll] sane_exit: calling backend nec's exit function [dll] sane_exit: calling backend mustek_usb2's exit function [dll] sane_exit: calling backend mustek_usb's exit function [dll] sane_exit: calling backend mustek's exit function [dll] sane_exit: calling backend microtek2's exit function [dll] sane_exit: calling backend microtek's exit function [dll] sane_exit: calling backend matsushita's exit function [dll] sane_exit: calling backend magicolor's exit function [dll] sane_exit: calling backend ma1509's exit function [dll] sane_exit: calling backend lexmark's exit function [dll] sane_exit: calling backend leo's exit function [dll] sane_exit: calling backend kvs20xx's exit function [dll] sane_exit: calling backend kvs1025's exit function [dll] sane_exit: calling backend kodakaio's exit function [dll] sane_exit: calling backend kodak's exit function [dll] sane_exit: calling backend ibm's exit function [dll] sane_exit: calling backend hs2p's exit function [dll] sane_exit: calling backend hpljm1005's exit function [dll] sane_exit: calling backend hp5590's exit function [dll] sane_exit: calling backend hp5400's exit function [dll] sane_exit: calling backend hp4200's exit function [dll] sane_exit: calling backend hp3500's exit function [dll] sane_exit: calling backend hpsj5s's exit function [dll] sane_exit: calling backend hp3900's exit function [dll] sane_exit: calling backend hp's exit function [dll] sane_exit: calling backend gt68xx's exit function [dll] sane_exit: calling backend genesys's exit function [dll] sane_exit: calling backend fujitsu's exit function [dll] sane_exit: calling backend epsonds's exit function [dll] sane_exit: calling backend epson2's exit function [dll] sane_exit: calling backend epjitsu's exit function [dll] sane_exit: calling backend dmc's exit function [dll] sane_exit: calling backend dell1600n_net's exit function [dll] sane_exit: calling backend coolscan3's exit function [dll] sane_exit: calling backend coolscan's exit function [dll] sane_exit: calling backend cardscan's exit function [dll] sane_exit: calling backend canon_dr's exit function [dll] sane_exit: calling backend canon630u's exit function [dll] sane_exit: calling backend canon's exit function [dll] sane_exit: calling backend bh's exit function [dll] sane_exit: calling backend artec_eplus48u's exit function [dll] sane_exit: calling backend artec's exit function [dll] sane_exit: calling backend avision's exit function [dll] sane_exit: calling backend apple's exit function [dll] sane_exit: calling backend agfafocus's exit function [dll] sane_exit: calling backend abaton's exit function [dll] sane_exit: calling backend net's exit function [dll] sane_exit: calling backend ls5000's exit function [dll] sane_exit: finished Nochmals Danke, daß Du Dir für mein Problem die Zeit nimmst. Mirek

Die Ausgabe von id ist:

uid=1000(mirek) gid=1000(mirek) Gruppen=1000(mirek),4(adm),7(lp),24(cdrom),27(sudo),30(dip),46(plugdev),118(lpadmin),128(sambashare)

Hallo Kellerkind,

vielen, vielen Dank!!!

Das Drucken und Scannen funktionieren jetzt mit Simple Scan einwandfrei - nach dem Ausführen Deiner Anleitung. Du kannst Dir nicht vorstellen, wie nervig die Suche nach einer Lösung war.

Mirek