staging.inyokaproject.org

Neustart, dann

lsusb -t

masterblack@wartank:~$ lsusb -t
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
        |__ Port 2: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
        |__ Port 2: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
masterblack@wartank:~$ 

Hätte auch noch die hier

masterblack@wartank:~$ lsusb
Bus 002 Device 004: ID 064e:c346 Suyin Corp. HP TrueVision HD
Bus 002 Device 003: ID 0bda:b006 Realtek Semiconductor Corp. Bluetooth Radio
Bus 002 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. Root Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:b812 Realtek Semiconductor Corp. RTL88x2bu [AC1200 Techkey]
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. Root Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
masterblack@wartank:~$ modprobe -c | grep -i "0bda.*b812"
alias usb:v0BDApB812d*dc*dsc*dp*icFFiscFFipFFin* 88x2bu
masterblack@wartank:~$ usb-devices | awk -v RS= /b812/
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=b812 Rev=02.10
S:  Manufacturer=Realtek
S:  Product=802.11ac NIC
S:  SerialNumber=123456
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us

Neustart gemacht? Was gab es als Ausgabe bei den make-Befehlen, die ich verlinkt habe?

Jup Neustart gemacht.

Ausgabe:

masterblack@wartank:~$ cd rtl88x2bu/
masterblack@wartank:~/rtl88x2bu$ make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/5.15.0-71-generic/build M=/home/masterblack/rtl88x2bu  modules
make[1]: Verzeichnis „/usr/src/linux-headers-5.15.0-71-generic“ wird betreten
warning: the compiler differs from the one used to build the kernel
  The kernel was built by: gcc (Ubuntu 11.3.0-1ubuntu1~22.04.1) 11.3.0
  You are using:           gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
make[1]: Verzeichnis „/usr/src/linux-headers-5.15.0-71-generic“ wird verlassen
masterblack@wartank:~/rtl88x2bu$ sudo make install
[sudo] Passwort für masterblack: 
install -p -m 644 88x2bu.ko  /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/
/sbin/depmod -a 5.15.0-71-generic
masterblack@wartank:~/rtl88x2bu$ 

JeneD. schrieb:

install -p -m 644 88x2bu.ko  /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/

Wie sind die Ausgaben von:

modinfo 88x2bu
lsmod | grep -i 88x2bu
sudo modprobe -rv && sudo modprobe -v 88x2bu
ip link

?

masterblack@wartank:~$ modinfo 88x2bu
filename:       /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko
version:        v5.8.7.1_35809.20191129_COEX20191120-7777
author:         Realtek Semiconductor Corp.
description:    Realtek Wireless Lan Driver
license:        GPL
srcversion:     7729BBA8473B9258C1CDAF3
alias:          usb:v13B1p0045d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v20F4p808Ad*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v7392pC822d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v7392pB822d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2357p0138d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2357p012Ed*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2357p012Dd*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2357p0115d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2001p331Fd*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2001p331Ed*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v2001p331Cd*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v13B1p0043d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v0B05p184Cd*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v0B05p1841d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v0846p9055d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v0BDApB812d*dc*dsc*dp*icFFiscFFipFFin*
alias:          usb:v0BDApB82Cd*dc*dsc*dp*icFFiscFFipFFin*
depends:        cfg80211
retpoline:      Y
name:           88x2bu
vermagic:       5.15.0-71-generic SMP mod_unload modversions 
parm:           rtw_wireless_mode:int
parm:           rtw_ips_mode:The default IPS mode (int)
parm:           rtw_lps_level:The default LPS level (int)
parm:           rtw_lps_chk_by_tp:int
parm:           rtw_max_bss_cnt:int
parm:           rtw_usb_rxagg_mode:int
parm:           rtw_dynamic_agg_enable:int
parm:           rtw_tx_aclt_flags:device TX AC queue packet lifetime control flags (uint)
parm:           rtw_tx_aclt_conf_default:device TX AC queue lifetime config for default status (array of uint)
parm:           rtw_tx_aclt_conf_ap_m2u:device TX AC queue lifetime config for AP mode M2U status (array of uint)
parm:           rtw_tx_bw_mode:The max tx bw for 2.4G and 5G. format is the same as rtw_bw_mode (uint)
parm:           rtw_rx_ampdu_sz_limit_1ss:RX AMPDU size limit for 1SS link of each BW, 0xFF: no limitation (array of uint)
parm:           rtw_rx_ampdu_sz_limit_2ss:RX AMPDU size limit for 2SS link of each BW, 0xFF: no limitation (array of uint)
parm:           rtw_rx_ampdu_sz_limit_3ss:RX AMPDU size limit for 3SS link of each BW, 0xFF: no limitation (array of uint)
parm:           rtw_rx_ampdu_sz_limit_4ss:RX AMPDU size limit for 4SS link of each BW, 0xFF: no limitation (array of uint)
parm:           rtw_vht_enable:int
parm:           rtw_vht_rx_mcs_map:VHT RX MCS map (uint)
parm:           rtw_rf_path:int
parm:           rtw_tx_nss:int
parm:           rtw_rx_nss:int
parm:           rtw_country_code:The default country code (in alpha2) (charp)
parm:           rtw_channel_plan:The default chplan ID when rtw_alpha2 is not specified or valid (int)
parm:           rtw_excl_chs:exclusive channel array (array of uint)
parm:           rtw_btcoex_enable:BT co-existence on/off, 0:off, 1:on, 2:by efuse (int)
parm:           rtw_ant_num:Antenna number setting, 0:by efuse (int)
parm:           rtw_pci_dynamic_aspm_linkctrl:int
parm:           rtw_qos_opt_enable:int
parm:           ifname:The default name to allocate for first interface (charp)
parm:           if2name:The default name to allocate for second interface (charp)
parm:           rtw_wowlan_sta_mix_mode:int
parm:           rtw_pwrtrim_enable:int
parm:           rtw_initmac:charp
parm:           rtw_chip_version:int
parm:           rtw_rfintfs:int
parm:           rtw_lbkmode:int
parm:           rtw_network_mode:int
parm:           rtw_channel:int
parm:           rtw_mp_mode:int
parm:           rtw_wmm_enable:int
parm:           rtw_uapsd_max_sp:int
parm:           rtw_uapsd_ac_enable:int
parm:           rtw_wmm_smart_ps:int
parm:           rtw_vrtl_carrier_sense:int
parm:           rtw_vcs_type:int
parm:           rtw_busy_thresh:int
parm:           rtw_ht_enable:int
parm:           rtw_bw_mode:int
parm:           rtw_ampdu_enable:int
parm:           rtw_rx_stbc:int
parm:           rtw_rx_ampdu_amsdu:int
parm:           rtw_tx_ampdu_amsdu:int
parm:           rtw_beamform_cap:int
parm:           rtw_lowrate_two_xmit:int
parm:           rtw_power_mgnt:int
parm:           rtw_smart_ps:int
parm:           rtw_low_power:int
parm:           rtw_wifi_spec:int
parm:           rtw_full_ch_in_p2p_handshake:int
parm:           rtw_antdiv_cfg:int
parm:           rtw_antdiv_type:int
parm:           rtw_drv_ant_band_switch:int
parm:           rtw_single_ant_path:int
parm:           rtw_switch_usb_mode:int
parm:           rtw_enusbss:int
parm:           rtw_hwpdn_mode:int
parm:           rtw_hwpwrp_detect:int
parm:           rtw_hw_wps_pbc:int
parm:           rtw_check_hw_status:int
parm:           rtw_max_roaming_times:The max roaming times to try (uint)
parm:           rtw_mc2u_disable:int
parm:           rtw_advnace_ota:int
parm:           rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint)
parm:           rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint)
parm:           rtw_adaptivity_en:0:disable, 1:enable (uint)
parm:           rtw_adaptivity_mode:0:normal, 1:carrier sense (uint)
parm:           rtw_adaptivity_th_l2h_ini:th_l2h_ini for Adaptivity (int)
parm:           rtw_adaptivity_th_edcca_hl_diff:th_edcca_hl_diff for Adaptivity (int)
parm:           rtw_dfs_region_domain:0:UNKNOWN, 1:FCC, 2:MKK, 3:ETSI (uint)
parm:           rtw_amplifier_type_2g:BIT3:2G ext-PA, BIT4:2G ext-LNA (uint)
parm:           rtw_amplifier_type_5g:BIT6:5G ext-PA, BIT7:5G ext-LNA (uint)
parm:           rtw_RFE_type:default init value:64 (uint)
parm:           rtw_powertracking_type:default init value:64 (uint)
parm:           rtw_GLNA_type:default init value:0 (uint)
parm:           rtw_TxBBSwing_2G:default init value:0xFF (uint)
parm:           rtw_TxBBSwing_5G:default init value:0xFF (uint)
parm:           rtw_OffEfuseMask:default open Efuse Mask value:0 (uint)
parm:           rtw_FileMaskEfuse:default drv Mask Efuse value:0 (uint)
parm:           rtw_rxgain_offset_2g:default RF Gain 2G Offset value:0 (uint)
parm:           rtw_rxgain_offset_5gl:default RF Gain 5GL Offset value:0 (uint)
parm:           rtw_rxgain_offset_5gh:uint
parm:           rtw_rxgain_offset_5gm:default RF Gain 5GM Offset value:0 (uint)
parm:           rtw_pll_ref_clk_sel:force pll_ref_clk_sel, 0xF:use autoload value (uint)
parm:           rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int)
parm:           rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int)
parm:           rtw_target_tx_pwr_2g_a:2.4G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_2g_b:2.4G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_2g_c:2.4G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_2g_d:2.4G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_5g_a:5G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_5g_b:5G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_5g_c:5G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_target_tx_pwr_5g_d:5G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int)
parm:           rtw_tsf_update_pause_factor:num of bcn intervals to stay TSF update pause status (int)
parm:           rtw_tsf_update_restore_factor:num of bcn intervals to stay TSF update restore status (int)
parm:           rtw_phy_file_path:The path of phy parameter (charp)
parm:           rtw_load_phy_file:PHY File Bit Map (int)
parm:           rtw_decrypt_phy_file:Enable Decrypt PHY File (int)
parm:           rtw_phydm_ability:uint
parm:           rtw_halrf_ability:uint
parm:           rtw_vht_2g4:Allow VHT rate on 2.4G channel.(0 for deny and 1 for allow) (int)
parm:           rtw_en_napi:int
parm:           rtw_en_gro:int
parm:           rtw_iqk_fw_offload:int
parm:           rtw_ch_switch_offload:int
masterblack@wartank:~$ lsmod | grep -i 88x2bu
masterblack@wartank:~$ lsmod | grep -i 88x2bu
masterblack@wartank:~$ 
masterblack@wartank:~$ 
masterblack@wartank:~$ sudo modprobe -rv && sudo modprobe -v 88x2bu
[sudo] Passwort für masterblack: 
modprobe: ERROR: missing parameters. See -h.
masterblack@wartank:~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
    link/ether 30:e1:71:21:2f:63 brd ff:ff:ff:ff:ff:ff
    altname enp2s0
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
    link/ether 90:cd:b6:10:8f:35 brd ff:ff:ff:ff:ff:ff
    altname wlp3s0
masterblack@wartank:~$ 

JeneD. schrieb:

masterblack@wartank:~$ sudo modprobe -rv && sudo modprobe -v 88x2bu
[sudo] Passwort für masterblack: 
modprobe: ERROR: missing parameters. See -h.

Sorry, meim Fehler. So muss es sein:

sudo modprobe -vr 88x2bu
sudo modprobe -v 88x2bu

lsmod | grep -i 88x2bu
ip link

?

Hi, gerade erst gemerkt dass ein anderer schreibt 😀

Aber die Befehle wollen irgendwie nicht:

masterblack@wartank:~$ sudo modprobe -vr 88x2bu
[sudo] Passwort für masterblack: 
masterblack@wartank:~$ sudo modprobe -v 88x2bu
insmod /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko 
modprobe: ERROR: could not insert '88x2bu': Operation not permitted
masterblack@wartank:~$ lsmod | grep -i 88x2bu
masterblack@wartank:~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
    link/ether 30:e1:71:21:2f:63 brd ff:ff:ff:ff:ff:ff
    altname enp2s0
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
    link/ether 90:cd:b6:10:8f:35 brd ff:ff:ff:ff:ff:ff
    altname wlp3s0
masterblack@wartank:~$ 

JeneD. schrieb:

Aber die Befehle wollen irgendwie nicht:

masterblack@wartank:~$ sudo modprobe -v 88x2bu
insmod /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko 
modprobe: ERROR: could not insert '88x2bu': Operation not permitted

Evtl. musst Du root sein. Versuch mal:

sudo -i
modprobe -v 88x2bu
exit

Mhh nein:

masterblack@wartank:~$ sudo -i
[sudo] Passwort für masterblack: 
root@wartank:~# modprobe -v 88x2bu
insmod /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko 
modprobe: ERROR: could not insert '88x2bu': Operation not permitted
root@wartank:~# exit
Abgemeldet
masterblack@wartank:~$

JeneD. schrieb:

Mhh nein:

insmod /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko 
modprobe: ERROR: could not insert '88x2bu': Operation not permitted

Wie sind die Ausgaben von:

file /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko
uname -a
dpkg --print-architecture

?

masterblack@wartank:~$ file /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko
/lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), BuildID[sha1]=9db466eb4ff02c314bf2d46779ddef2f750bc1b7, with debug_info, not stripped
masterblack@wartank:~$ uname -a
Linux wartank 5.15.0-71-generic #78-Ubuntu SMP Tue Apr 18 09:00:29 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
masterblack@wartank:~$ dpkg print-architecture
dpkg: Fehler: eine Aktions-Option wird benötigt

Nutzen Sie dpkg --help für Hilfe zur Installation und Deinst. von Paketen [*];
Benutzen Sie »apt« oder »aptitude« für benutzerfreundliches Paketmanagement;
Nutzen Sie dpkg -Dhelp für eine Liste von Debug-Flags von dpkg;
Nutzen Sie dpkg --force-help für eine Liste von Optionen zum Erzwingen;
Nutzen Sie dpkg-deb --help für Hilfe zum Manipulieren von *.deb-Dateien;

Optionen mit [*] geben viel aus - schicken Sie es durch »less« oder »more«!
masterblack@wartank:~$ 

JeneD. schrieb:

masterblack@wartank:~$ file /lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko
/lib/modules/5.15.0-71-generic/kernel/drivers/net/wireless/88x2bu.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), BuildID[sha1]=9db466eb4ff02c314bf2d46779ddef2f750bc1b7, with debug_info, not stripped
masterblack@wartank:~$ uname -a
Linux wartank 5.15.0-71-generic #78-Ubuntu SMP Tue Apr 18 09:00:29 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux

Das passt. Dann liegt es evtl. daran, dass das Modul nicht signiert ist. Evtl. kann man diese Funktion/Anforderung, im Kernel deaktivieren. Such mal im Internet.

Nach was genau, Kernel Module signieren??

Könnte dies weiterhelfen? https://wolfwarrior.de/category/linux/