staging.inyokaproject.org

via DuckDuckGo

Lenovo Thinkpad X201 Tablet - Wacom "Display" wird nicht erkannt

Status: Ungelöst | Ubuntu-Version: Ubuntu 20.04 (Focal Fossa)
Antworten |

taildragger

Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
21. April 2022 07:37 (zuletzt bearbeitet: 21. April 2022 07:41)

Hallo Zusammen,

ich komme bekomme ein Problem nicht gelöst. Ich nutze primär ein Thinkpad X201T. Das hat ein integriertes WacomTablet über dem Display. Ich nutze es schon viele Jahre, allerdings diese Funktion nicht täglich. Aber es funktionierte immer tadellos.

Aktuell funktioniert es nicht - er erkennt das WacomTablet nicht mehr.

Ich benötige mal bitte Hilfe um dem Fehler auf die Spur zu kommen.

lsusb führt zu folgender Aussagen:

Bus 002 Device 004: ID 05c6:9204 Qualcomm, Inc. 
Bus 002 Device 003: ID 0bda:0159 Realtek Semiconductor Corp. RTS5159 Card Reader Controller
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 007: ID 17ef:4816 Lenovo Integrated Webcam
Bus 001 Device 006: ID 17ef:1005 Lenovo 
Bus 001 Device 005: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 003: ID 0781:5583 SanDisk Corp. Ultra Fit
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Der Befehl: "ubuntu-drivers autoinstall" führt zu nichts.

Also offenbar wird das Wacom gar nicht mehr erkannt. Hat jemand eine Idee, wie ich weiter vorgehen kann?

taildragger

(Themenstarter)
Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
21. April 2022 08:12 (zuletzt bearbeitet: 21. April 2022 08:20)

Habe gerade noch festgestellt, dass es bis zum Anmeldebildschirm funktioniert. Wenn ich mich an meinem System anmelde und er meinen Desktop geladen hat funktioniert es nicht mehr.

Der Befehl:

sudo sh -c "apt-get update && apt-get install xserver-xorg-input-wacom$(dpkg -S $(which Xorg) | grep -Eo -- "-hwe-[^:]*")"

ergibt:

....
Statusinformationen werden eingelesen.... Fertig
xserver-xorg-input-wacom ist schon die neueste Version (1:0.39.0-0ubuntu1).

taildragger

(Themenstarter)
Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
21. April 2022 08:43

Habe gerade festgestellt, dass während des bootens der Stift nur für eine kurze Zeit funktioniert. Ich sehe schon meine Anmeldefenster und er funktioniert noch. Während dessen werden aber weitere Dinge geladen und offenbar gestartet und wenn der Ladevorgang abgeschlossen ist (noch vor meiner Anmeldung) funktioniert er nicht mehr.

taildragger

(Themenstarter)
Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
19. März 2023 09:16 (zuletzt bearbeitet: 19. März 2023 09:16)

Gibt es niemanden, der mir einen Lösungsansatz geben kann? Das so einen Rechner fast keiner hat, ist mir schon klar. Aber wie kann ich raus bekommen, warum eine Peripherie während des Anmeldevorgangs "abgehängt" wird?

pantomime

Anmeldungsdatum:
20. März 2013

Beiträge: 234
Zitieren
19. März 2023 10:43 (zuletzt bearbeitet: 19. März 2023 10:45)

Hallo,

Ich habe ChatGPT befragt und würde mich auf eine Rückmeldung freuen, ob ChatGPT irgendwelche hilfreiche Ansätze geliefert hat.

> question Anfang:

Ich nutze primär ein Thinkpad X201T. Das hat ein integriertes WacomTablet über dem Display. Ich nutze es schon viele Jahre, allerdings diese Funktion nicht täglich. Aber es funktionierte immer tadellos.

Aktuell funktioniert es nicht - er erkennt das WacomTablet nicht mehr.

lsusb führt zu folgender Aussagen:

Zitatanfang

Bus 002 Device 004: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 003: ID 0bda:0159 Realtek Semiconductor Corp. RTS5159 Card Reader Controller Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 007: ID 17ef:4816 Lenovo Integrated Webcam Bus 001 Device 006: ID 17ef:1005 Lenovo Bus 001 Device 005: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 003: ID 0781:5583 SanDisk Corp. Ultra Fit Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ZitatEnde

Der Befehl "ubuntu-drivers autoinstall" führt zu nichts.

Also offenbar wird das Wacom gar nicht mehr erkannt. Habe noch festgestellt, dass es bis zum Anmeldebildschirm funktioniert. Wenn ich mich an meinem System anmelde und er meinen Desktop geladen hat funktioniert es nicht mehr.

Der Befehl: 'sudo sh -c "apt-get update && apt-get install xserver-xorg-input-wacom$(dpkg -S $(which Xorg) | grep -Eo – "-hwe-[^:]*")"' ergibt: "Statusinformationen werden eingelesen.... Fertig xserver-xorg-input-wacom ist schon die neueste Version (1:0.39.0-0ubuntu1)."

Habe auch festgestellt, dass während des Bootens der Stift nur für eine kurze Zeit funktioniert. Ich sehe schon meine Anmeldefenster und er funktioniert noch. Während dessen werden aber weitere Dinge geladen und offenbar gestartet und wenn der Ladevorgang abgeschlossen ist (noch vor meiner Anmeldung) funktioniert er nicht mehr.

Was kann ich tun, damit Wacom Tablet wieder erkannt wird? 

> question Ende:

Hier die Antwort: 

> ChatGPT-answer Anfang:

Es scheint, dass das WacomTablet auf Ihrem Thinkpad X201T nicht mehr erkannt wird, obwohl es zuvor immer tadellos funktioniert hat. Es ist jedoch gut zu hören, dass es bis zum Anmeldebildschirm funktioniert. Hier sind einige mögliche Schritte, die Sie unternehmen können, um das Problem zu beheben:

  1. Aktualisieren Sie das BIOS auf Ihrem Thinkpad X201T, um sicherzustellen, dass die neueste Firmware installiert ist. Manchmal können Probleme mit der Hardwareerkennung durch veraltete Firmware verursacht werden.

  2. Stellen Sie sicher, dass die Wacom-Module in Ubuntu geladen werden. Sie können die Ausgabe von 

    lsmod | grep wacom

    überprüfen, um zu sehen, ob die Module geladen sind. Wenn sie nicht geladen sind, können Sie sie mit dem Befehl 

    sudo modprobe wacom

    manuell laden.

  3. Überprüfen Sie, ob es irgendwelche Konflikte mit anderen Eingabegeräten gibt. Deaktivieren Sie vorübergehend andere Eingabegeräte wie Maus und Tastatur, um zu sehen, ob dies das Problem löst.

  4. Führen Sie einen vollständigen Systemscan auf Schadsoftware durch, da einige Viren und Malware-Infektionen das WacomTablet deaktivieren können.

  5. Versuchen Sie, den LightDM-Display-Manager zu aktualisieren oder zu wechseln. Einige Benutzer haben berichtet, dass sie das Problem mit dem WacomTablet durch den Wechsel von LightDM zu GDM gelöst haben.

  6. Führen Sie eine Neuinstallation des xserver-xorg-input-wacom-Treibers durch. Verwenden Sie dazu den Befehl 

    sudo apt-get remove xserver-xorg-input-wacom

    und 

    sudo apt-get install xserver-xorg-input-wacom

  7. Überprüfen Sie, ob das Problem mit einer älteren Version von Ubuntu nicht auftritt. Versuchen Sie, eine frühere Version von Ubuntu zu booten und zu sehen, ob das WacomTablet dann funktioniert.

> ChatGPT-answer Ende

Generiert auf https://chat.openai.com/ am 19.03.2023

taildragger

(Themenstarter)
Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
19. März 2023 11:46

Also Bios können wir denke ich ausschließen - das wäre unlogisch. Zum einen ist das ja fest verbaute Hardware, also konnte das Bios zu allen Zeiten damit umgehen und zum anderen funktioniert es ja beim booten noch bis in den "Displaymanager" hinein.

zu 2.

Die Ausgabe bei lsmod ist:

wacom_w8001            24576  0

Damit kann ich leider nicht viel Anfangen. Bei 

sudo modeprob wacom

führt er zwar aus - aber ändert sich nichts. Stift geht trotzdem nicht.

Ein Wechseln von GDM3 zu Lightdm hilft auch nicht. Allerdings habe ich zwischendurch von einem 22.04er USB Stick gebootet, bin dann in den RecoveryMode und habe von da aus weiter gebootet und dann ging es komplett.

Ich kann das aber nicht rekonstruieren, wenn ich direkt von Festplatte boote.

Ich glaube es bleibt mir nichts anderes übrig als die Maschine einmal komplett neu aufzusetzen.

Ich hätte halt gerne diese bootvorgang besser verstanden. Während der Displaymanager angezeigt wird - so ca. 3sek nach sichtbar werden stirbt das Wacom ab.

pantomime

Anmeldungsdatum:
20. März 2013

Beiträge: 234
Zitieren
19. März 2023 11:54 (zuletzt bearbeitet: 19. März 2023 11:56)

taildragger schrieb:

Ich kann das aber nicht rekonstruieren, wenn ich direkt von Festplatte boote.

Ich glaube es bleibt mir nichts anderes übrig als die Maschine einmal komplett neu aufzusetzen.

Ich hätte halt gerne diese bootvorgang besser verstanden. Während der Displaymanager angezeigt wird - so ca. 3sek nach sichtbar werden stirbt das Wacom ab.

Dann kannst du Angaben zu deinem System KOMPLETT hier posten und hoffen, dass die Experten sich dafür interessieren und weiter helfen können. Ein anderer Lösungsansatz - du richtest dir bei ChatGPT oder einem anderen schlauen Orakel einen Account und fragst dich durch, um den Bootvorgang besser zu verstehen. Das Problem ist aber ähnlich wie hier im Forum - wie schaffe ich, die richtige Fragen zu stellen, zu formulieren? Vorteil der Orakel-Variante - die Antworten kommen schnell ☺.

taildragger

(Themenstarter)
Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
19. März 2023 12:02 (zuletzt bearbeitet: 19. März 2023 12:10)

Ok, folgende Ausgaben zu meinem System:

lspci -nnk | grep -A3 "\[03..\]:"

ergibt:

00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
	Subsystem: Lenovo Core Processor Integrated Graphics Controller [17aa:215a]
	Kernel driver in use: i915
	Kernel modules: i915

xrandr --prop

ergibt:

Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
LVDS-1 connected primary 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm
	EDID: 
		00ffffffffffff0030ae114000000000
		00130103801a1078ea2f158a58568f26
		18505400000001010101010101010101
		0101010101015c1d00f2502017303054
		360005a3100000195c1d00f250201730
		3054360005a3100000190000000f0081
		0a3c810a3c1e0a0000009e08000000fe
		0048563132315758362d3131300a0014
	scaling mode: Full aspect 
		supported: Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 61 
		supported: 61
	non-desktop: 0 
		range: (0, 1)
   1280x800      60.00*+  59.99    59.97    59.81    59.91  
   1280x720      60.00    59.99    59.86    59.74  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   960x540       59.96    59.99    59.63    59.82  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   800x512       60.17  
   700x525       59.98  
   800x450       59.95    59.82  
   640x512       60.02  
   720x450       59.89  
   700x450       59.96    59.88  
   640x480       60.00    59.94  
   720x405       59.51    58.99  
   684x384       59.88    59.85  
   680x384       59.80    59.96  
   640x400       59.88    59.98  
   576x432       60.06  
   640x360       59.86    59.83    59.84    59.32  
   512x384       60.00  
   512x288       60.00    59.92  
   480x270       59.63    59.82  
   400x300       60.32    56.34  
   432x243       59.92    59.57  
   320x240       60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
VGA-1 disconnected (normal left inverted right x axis y axis)
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 64 
		supported: 64
	non-desktop: 0 
		range: (0, 1)
HDMI-1 disconnected (normal left inverted right x axis y axis)
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 68 
		supported: 68
	non-desktop: 0 
		range: (0, 1)
DP-1 disconnected (normal left inverted right x axis y axis)
	Colorspace: Default 
		supported: Default, RGB_Wide_Gamut_Fixed_Point, RGB_Wide_Gamut_Floating_Point, opRGB, DCI-P3_RGB_D65, BT2020_RGB, BT601_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, BT2020_CYCC, BT2020_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 76 
		supported: 76
	non-desktop: 0 
		range: (0, 1)

der Inhalt der /var/log/Xorg.0.log

[    10.061] 
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[    10.061] Build Operating System: linux Ubuntu
[    10.061] Current Operating System: Linux Steffen-ThinkPad-X201-Tablet 5.15.0-67-generic #74~20.04.1-Ubuntu SMP Wed Feb 22 14:52:34 UTC 2023 x86_64
[    10.061] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-67-generic root=UUID=17f58025-a809-4333-9b8e-df6e7a05ac3b ro quiet splash vt.handoff=7
[    10.061] Build Date: 07 February 2023  12:48:13PM
[    10.061] xorg-server 2:1.20.13-1ubuntu1~20.04.6 (For technical support please see http://www.ubuntu.com/support) 
[    10.061] Current version of pixman: 0.38.4
[    10.061] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    10.061] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.062] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 19 11:37:20 2023
[    10.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.068] (==) No Layout section.  Using the first Screen section.
[    10.068] (==) No screen section available. Using defaults.
[    10.068] (**) |-->Screen "Default Screen Section" (0)
[    10.068] (**) |   |-->Monitor "<default monitor>"
[    10.070] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    10.070] (==) Automatically adding devices
[    10.070] (==) Automatically enabling devices
[    10.070] (==) Automatically adding GPU devices
[    10.070] (==) Automatically binding GPU devices
[    10.070] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    10.082] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.082] 	Entry deleted from font path.
[    10.082] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.082] 	Entry deleted from font path.
[    10.082] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.082] 	Entry deleted from font path.
[    10.082] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.082] 	Entry deleted from font path.
[    10.082] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.082] 	Entry deleted from font path.
[    10.082] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    10.082] (==) ModulePath set to "/usr/lib/xorg/modules"
[    10.082] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.082] (II) Loader magic: 0x55d2ba518020
[    10.082] (II) Module ABI versions:
[    10.082] 	X.Org ANSI C Emulation: 0.4
[    10.082] 	X.Org Video Driver: 24.1
[    10.082] 	X.Org XInput driver : 24.1
[    10.082] 	X.Org Server Extension : 10.0
[    10.084] (++) using VT number 7

[    10.084] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    10.085] (II) xfree86: Adding drm device (/dev/dri/card0)
[    10.109] (--) PCI:*(0@0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[    10.109] (II) LoadModule: "glx"
[    10.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    10.133] (II) Module glx: vendor="X.Org Foundation"
[    10.133] 	compiled for 1.20.13, module version = 1.0.0
[    10.133] 	ABI class: X.Org Server Extension, version 10.0
[    10.133] (==) Matched modesetting as autoconfigured driver 0
[    10.133] (==) Matched fbdev as autoconfigured driver 1
[    10.133] (==) Matched vesa as autoconfigured driver 2
[    10.133] (==) Assigned the driver to the xf86ConfigLayout
[    10.133] (II) LoadModule: "modesetting"
[    10.133] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.134] (II) Module modesetting: vendor="X.Org Foundation"
[    10.134] 	compiled for 1.20.13, module version = 1.20.13
[    10.134] 	Module class: X.Org Video Driver
[    10.134] 	ABI class: X.Org Video Driver, version 24.1
[    10.134] (II) LoadModule: "fbdev"
[    10.134] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    10.136] (II) Module fbdev: vendor="X.Org Foundation"
[    10.136] 	compiled for 1.20.1, module version = 0.5.0
[    10.136] 	Module class: X.Org Video Driver
[    10.136] 	ABI class: X.Org Video Driver, version 24.0
[    10.136] (II) LoadModule: "vesa"
[    10.136] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.138] (II) Module vesa: vendor="X.Org Foundation"
[    10.138] 	compiled for 1.20.4, module version = 2.4.0
[    10.138] 	Module class: X.Org Video Driver
[    10.138] 	ABI class: X.Org Video Driver, version 24.0
[    10.138] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.138] (II) FBDEV: driver for framebuffer: fbdev
[    10.138] (II) VESA: driver for VESA chipsets: vesa
[    10.166] (II) modeset(0): using drv /dev/dri/card0
[    10.166] (WW) Falling back to old probe method for fbdev
[    10.166] (II) Loading sub module "fbdevhw"
[    10.166] (II) LoadModule: "fbdevhw"
[    10.166] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    10.167] (II) Module fbdevhw: vendor="X.Org Foundation"
[    10.167] 	compiled for 1.20.13, module version = 0.0.2
[    10.167] 	ABI class: X.Org Video Driver, version 24.1
[    10.167] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    10.167] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    10.167] (==) modeset(0): RGB weight 888
[    10.167] (==) modeset(0): Default visual is TrueColor
[    10.167] (II) Loading sub module "glamoregl"
[    10.167] (II) LoadModule: "glamoregl"
[    10.167] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    10.183] (II) Module glamoregl: vendor="X.Org Foundation"
[    10.187] 	compiled for 1.20.13, module version = 1.0.1
[    10.187] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.343] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics (ILK)
[    10.343] (II) modeset(0): glamor initialized
[    10.343] (II) modeset(0): Output LVDS-1 has no monitor section
[    10.346] (II) modeset(0): Output VGA-1 has no monitor section
[    10.348] (II) modeset(0): Output HDMI-1 has no monitor section
[    10.348] (II) modeset(0): Output DP-1 has no monitor section
[    10.348] (II) modeset(0): EDID for output LVDS-1
[    10.348] (II) modeset(0): Manufacturer: LEN  Model: 4011  Serial#: 0
[    10.348] (II) modeset(0): Year: 2009  Week: 0
[    10.348] (II) modeset(0): EDID Version: 1.3
[    10.348] (II) modeset(0): Digital Display Input
[    10.348] (II) modeset(0): Max Image Size [cm]: horiz.: 26  vert.: 16
[    10.348] (II) modeset(0): Gamma: 2.20
[    10.348] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    10.348] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    10.348] (II) modeset(0): First detailed timing is preferred mode
[    10.348] (II) modeset(0): redX: 0.539 redY: 0.346   greenX: 0.339 greenY: 0.562
[    10.348] (II) modeset(0): blueX: 0.148 blueY: 0.095   whiteX: 0.313 whiteY: 0.329
[    10.348] (II) modeset(0): Manufacturer's mask: 0
[    10.348] (II) modeset(0): Supported detailed timing:
[    10.349] (II) modeset(0): clock: 75.2 MHz   Image Size:  261 x 163 mm
[    10.349] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1412 h_blank_end 1522 h_border: 0
[    10.349] (II) modeset(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    10.349] (II) modeset(0): Supported detailed timing:
[    10.349] (II) modeset(0): clock: 75.2 MHz   Image Size:  261 x 163 mm
[    10.349] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1412 h_blank_end 1522 h_border: 0
[    10.349] (II) modeset(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    10.349] (II) modeset(0): Unknown vendor-specific block f
[    10.349] (II) modeset(0):  HV121WX6-110
[    10.349] (II) modeset(0): EDID (in hex):
[    10.349] (II) modeset(0): 	00ffffffffffff0030ae114000000000
[    10.349] (II) modeset(0): 	00130103801a1078ea2f158a58568f26
[    10.349] (II) modeset(0): 	18505400000001010101010101010101
[    10.349] (II) modeset(0): 	0101010101015c1d00f2502017303054
[    10.349] (II) modeset(0): 	360005a3100000195c1d00f250201730
[    10.349] (II) modeset(0): 	3054360005a3100000190000000f0081
[    10.349] (II) modeset(0): 	0a3c810a3c1e0a0000009e08000000fe
[    10.349] (II) modeset(0): 	0048563132315758362d3131300a0014
[    10.349] (II) modeset(0): Printing probed modes for output LVDS-1
[    10.349] (II) modeset(0): Modeline "1280x800"x60.0   75.16  1280 1328 1412 1522  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    10.349] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    10.349] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    10.350] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    10.350] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    10.350] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    10.350] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    10.350] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    10.350] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    10.350] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    10.350] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    10.350] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    10.350] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    10.350] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    10.350] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    10.350] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    10.350] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    10.350] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    10.350] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    10.350] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    10.350] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    10.350] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    10.350] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    10.350] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    10.350] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    10.350] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    10.350] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    10.350] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    10.350] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    10.350] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    10.350] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    10.350] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    10.350] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    10.350] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    10.350] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    10.350] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    10.350] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    10.350] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    10.350] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    10.350] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    10.350] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    10.350] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    10.350] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    10.350] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    10.350] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    10.350] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    10.350] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    10.350] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    10.351] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    10.351] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    10.351] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    10.351] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    10.351] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    10.351] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    10.351] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    10.351] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    10.351] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    10.351] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    10.351] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    10.351] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    10.351] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    10.351] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    10.354] (II) modeset(0): EDID for output VGA-1
[    10.355] (II) modeset(0): EDID for output HDMI-1
[    10.355] (II) modeset(0): EDID for output DP-1
[    10.355] (II) modeset(0): Output LVDS-1 connected
[    10.355] (II) modeset(0): Output VGA-1 disconnected
[    10.355] (II) modeset(0): Output HDMI-1 disconnected
[    10.355] (II) modeset(0): Output DP-1 disconnected
[    10.355] (II) modeset(0): Using exact sizes for initial modes
[    10.356] (II) modeset(0): Output LVDS-1 using initial mode 1280x800 +0+0
[    10.356] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    10.356] (==) modeset(0): DPI set to (96, 96)
[    10.356] (II) Loading sub module "fb"
[    10.356] (II) LoadModule: "fb"
[    10.356] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.357] (II) Module fb: vendor="X.Org Foundation"
[    10.357] 	compiled for 1.20.13, module version = 1.0.0
[    10.357] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.357] (II) UnloadModule: "fbdev"
[    10.357] (II) Unloading fbdev
[    10.357] (II) UnloadSubModule: "fbdevhw"
[    10.357] (II) Unloading fbdevhw
[    10.357] (II) UnloadModule: "vesa"
[    10.357] (II) Unloading vesa
[    10.387] (==) modeset(0): Backing store enabled
[    10.387] (==) modeset(0): Silken mouse enabled
[    10.415] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    10.416] (==) modeset(0): DPMS enabled
[    10.416] (II) modeset(0): [DRI2] Setup complete
[    10.416] (II) modeset(0): [DRI2]   DRI driver: i965
[    10.416] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[    10.416] (II) Initializing extension Generic Event Extension
[    10.416] (II) Initializing extension SHAPE
[    10.416] (II) Initializing extension MIT-SHM
[    10.417] (II) Initializing extension XInputExtension
[    10.421] (II) Initializing extension XTEST
[    10.422] (II) Initializing extension BIG-REQUESTS
[    10.422] (II) Initializing extension SYNC
[    10.422] (II) Initializing extension XKEYBOARD
[    10.422] (II) Initializing extension XC-MISC
[    10.423] (II) Initializing extension SECURITY
[    10.423] (II) Initializing extension XFIXES
[    10.423] (II) Initializing extension RENDER
[    10.423] (II) Initializing extension RANDR
[    10.424] (II) Initializing extension COMPOSITE
[    10.424] (II) Initializing extension DAMAGE
[    10.424] (II) Initializing extension MIT-SCREEN-SAVER
[    10.425] (II) Initializing extension DOUBLE-BUFFER
[    10.425] (II) Initializing extension RECORD
[    10.425] (II) Initializing extension DPMS
[    10.426] (II) Initializing extension Present
[    10.426] (II) Initializing extension DRI3
[    10.426] (II) Initializing extension X-Resource
[    10.426] (II) Initializing extension XVideo
[    10.427] (II) Initializing extension XVideo-MotionCompensation
[    10.427] (II) Initializing extension SELinux
[    10.427] (II) SELinux: Disabled on system
[    10.427] (II) Initializing extension GLX
[    10.443] (II) AIGLX: Loaded and initialized i965
[    10.443] (II) GLX: Initialized DRI2 GL provider for screen 0
[    10.443] (II) Initializing extension XFree86-VidModeExtension
[    10.444] (II) Initializing extension XFree86-DGA
[    10.444] (II) Initializing extension XFree86-DRI
[    10.444] (II) Initializing extension DRI2
[    10.449] (II) modeset(0): Damage tracking initialized
[    10.449] (II) modeset(0): Setting screen physical size to 338 x 211
[    10.544] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    10.544] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    10.544] (II) LoadModule: "libinput"
[    10.544] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    10.548] (II) Module libinput: vendor="X.Org Foundation"
[    10.548] 	compiled for 1.20.4, module version = 0.29.0
[    10.548] 	Module class: X.Org XInput Driver
[    10.548] 	ABI class: X.Org XInput driver, version 24.1
[    10.548] (II) Using input driver 'libinput' for 'Power Button'
[    10.548] (**) Power Button: always reports core events
[    10.548] (**) Option "Device" "/dev/input/event2"
[    10.549] (**) Option "_source" "server/udev"
[    10.555] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    10.555] (II) event2  - Power Button: device is a keyboard
[    10.556] (II) event2  - Power Button: device removed
[    10.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    10.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    10.583] (**) Option "xkb_model" "pc105"
[    10.583] (**) Option "xkb_layout" "de"
[    10.619] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    10.619] (II) event2  - Power Button: device is a keyboard
[    10.620] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    10.620] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    10.620] (II) Using input driver 'libinput' for 'Video Bus'
[    10.620] (**) Video Bus: always reports core events
[    10.620] (**) Option "Device" "/dev/input/event7"
[    10.620] (**) Option "_source" "server/udev"
[    10.622] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    10.622] (II) event7  - Video Bus: device is a keyboard
[    10.622] (II) event7  - Video Bus: device removed
[    10.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event7"
[    10.640] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    10.640] (**) Option "xkb_model" "pc105"
[    10.640] (**) Option "xkb_layout" "de"
[    10.642] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    10.642] (II) event7  - Video Bus: device is a keyboard
[    10.643] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    10.643] (II) No input driver specified, ignoring this device.
[    10.643] (II) This device may have been added with another device file.
[    10.644] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    10.644] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    10.644] (II) Using input driver 'libinput' for 'Sleep Button'
[    10.644] (**) Sleep Button: always reports core events
[    10.644] (**) Option "Device" "/dev/input/event1"
[    10.644] (**) Option "_source" "server/udev"
[    10.646] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    10.646] (II) event1  - Sleep Button: device is a keyboard
[    10.646] (II) event1  - Sleep Button: device removed
[    10.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    10.663] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    10.663] (**) Option "xkb_model" "pc105"
[    10.663] (**) Option "xkb_layout" "de"
[    10.665] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    10.665] (II) event1  - Sleep Button: device is a keyboard
[    10.667] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event13)
[    10.667] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    10.667] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[    10.667] (**) Integrated Camera: Integrated C: always reports core events
[    10.667] (**) Option "Device" "/dev/input/event13"
[    10.667] (**) Option "_source" "server/udev"
[    10.669] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    10.669] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[    10.669] (II) event13 - Integrated Camera: Integrated C: device removed
[    10.731] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16/event13"
[    10.731] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[    10.731] (**) Option "xkb_model" "pc105"
[    10.731] (**) Option "xkb_layout" "de"
[    10.733] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    10.734] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[    10.734] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event8)
[    10.734] (II) No input driver specified, ignoring this device.
[    10.734] (II) This device may have been added with another device file.
[    10.735] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event9)
[    10.735] (II) No input driver specified, ignoring this device.
[    10.735] (II) This device may have been added with another device file.
[    10.735] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event10)
[    10.735] (II) No input driver specified, ignoring this device.
[    10.735] (II) This device may have been added with another device file.
[    10.736] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event11)
[    10.736] (II) No input driver specified, ignoring this device.
[    10.736] (II) This device may have been added with another device file.
[    10.736] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event12)
[    10.736] (II) No input driver specified, ignoring this device.
[    10.736] (II) This device may have been added with another device file.
[    10.737] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    10.737] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    10.737] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    10.737] (**) AT Translated Set 2 keyboard: always reports core events
[    10.737] (**) Option "Device" "/dev/input/event3"
[    10.737] (**) Option "_source" "server/udev"
[    10.739] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    10.739] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    10.739] (II) event3  - AT Translated Set 2 keyboard: device removed
[    10.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    10.767] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    10.767] (**) Option "xkb_model" "pc105"
[    10.767] (**) Option "xkb_layout" "de"
[    10.769] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    10.769] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    10.771] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    10.771] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    10.771] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    10.771] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    10.771] (**) Option "Device" "/dev/input/event4"
[    10.771] (**) Option "_source" "server/udev"
[    10.773] (II) event4  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    10.774] (II) event4  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    10.774] (II) event4  - SynPS/2 Synaptics TouchPad: device removed
[    10.835] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[    10.835] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    10.836] (**) Option "AccelerationScheme" "none"
[    10.836] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    10.836] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    10.836] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    10.838] (II) event4  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    10.838] (II) event4  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    10.839] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    10.839] (II) No input driver specified, ignoring this device.
[    10.839] (II) This device may have been added with another device file.
[    10.840] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[    10.840] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    10.840] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    10.840] (**) TPPS/2 IBM TrackPoint: always reports core events
[    10.840] (**) Option "Device" "/dev/input/event5"
[    10.840] (**) Option "_source" "server/udev"
[    10.841] (II) event5  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    10.842] (II) event5  - TPPS/2 IBM TrackPoint: device is a pointer
[    10.843] (II) event5  - TPPS/2 IBM TrackPoint: device removed
[    10.887] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input6/event5"
[    10.887] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[    10.887] (**) Option "AccelerationScheme" "none"
[    10.887] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    10.887] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    10.887] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    10.890] (II) event5  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    10.890] (II) event5  - TPPS/2 IBM TrackPoint: device is a pointer
[    10.893] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    10.893] (II) No input driver specified, ignoring this device.
[    10.893] (II) This device may have been added with another device file.
[    10.898] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[    10.898] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    10.898] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    10.898] (**) ThinkPad Extra Buttons: always reports core events
[    10.898] (**) Option "Device" "/dev/input/event6"
[    10.898] (**) Option "_source" "server/udev"
[    10.899] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    10.899] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[    10.899] (II) event6  - ThinkPad Extra Buttons: device is a switch device
[    10.900] (II) event6  - ThinkPad Extra Buttons: device removed
[    10.935] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[    10.935] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[    10.935] (**) Option "xkb_model" "pc105"
[    10.935] (**) Option "xkb_layout" "de"
[    10.938] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    10.938] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[    10.938] (II) event6  - ThinkPad Extra Buttons: device is a switch device
[    10.940] (II) config/udev: Adding input device Serial Wacom Tablet WACf00c (/dev/ttyS4)
[    10.940] (**) Serial Wacom Tablet WACf00c: Applying InputClass "Wacom serial class"
[    10.940] (**) Serial Wacom Tablet WACf00c: Applying InputClass "Wacom serial class identifiers"
[    10.940] (II) LoadModule: "wacom"
[    10.940] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    10.942] (II) Module wacom: vendor="X.Org Foundation"
[    10.942] 	compiled for 1.20.7, module version = 0.39.0
[    10.942] 	Module class: X.Org XInput Driver
[    10.942] 	ABI class: X.Org XInput driver, version 24.1
[    10.942] (II) Build version: 0.39.0
[    10.942] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
	Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
	Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
	Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
	CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
	CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
	Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
	PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
	DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
	Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18,
	Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3,
	PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5,
	Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
	Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13,
	Intuos4 12x19, Intuos4 WL USB Endpoint,
	Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
	Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
	Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
	Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
	Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
	Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
	MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
	Mobilestudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 13,
	MobileStudio Pro 16, MobileStudio Pro 16, MobileStudio Pro 16,
	TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
	CapPlus  0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
	TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
	TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
	TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
	TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
	usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
	usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
	usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
	usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
	usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
	usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
	usb:1b96:0001, usb:17ef:6004
[    10.945] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf00c'
[    10.945] (**) Serial Wacom Tablet WACf00c: always reports core events
[    10.945] (**) Option "Device" "/dev/ttyS4"
[    10.945] (II) Serial Wacom Tablet WACf00c: type not specified, assuming 'stylus'.
[    10.945] (II) Serial Wacom Tablet WACf00c: other types will be automatically added.
[    10.946] (EE) Serial Wacom Tablet WACf00c stylus: wcmWriteWait error : Input/output error
[    10.946] (WW) Serial Wacom Tablet WACf00c stylus: Query failed with 38400 baud. Trying 19200.
[    10.946] (EE) Serial Wacom Tablet WACf00c stylus: wcmWriteWait error : Input/output error
[    10.946] (EE) Serial Wacom Tablet WACf00c stylus: wcmWriteWait error : Input/output error
[    10.946] (II) Serial Wacom Tablet WACf00c stylus: serial tablet id 0xE3.
[    10.946] (EE) PreInit returned 8 for "Serial Wacom Tablet WACf00c stylus"
[    10.946] (II) UnloadModule: "wacom"
[    10.947] (II) config/udev: Adding input device Wacom Serial Penabled 2FG Touchscreen Finger (/dev/input/event15)
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger: Applying InputClass "libinput touchscreen catchall"
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger: Applying InputClass "Wacom USB touchscreen class"
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger: Applying InputClass "Wacom touchscreen class"
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger: Applying InputClass "Wacom PnP device class"
[    10.947] (II) Using input driver 'wacom' for 'Wacom Serial Penabled 2FG Touchscreen Finger'
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger: always reports core events
[    10.947] (**) Option "Device" "/dev/input/event15"
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger: Invalid type 'stylus' for this device.
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger: Invalid type 'eraser' for this device.
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger: Invalid type 'cursor' for this device.
[    10.947] (II) Wacom Serial Penabled 2FG Touchscreen Finger: type not specified, assuming 'touch'.
[    10.947] (II) Wacom Serial Penabled 2FG Touchscreen Finger: other types will be automatically added.
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger touch: panscroll is 0
[    10.947] (**) Wacom Serial Penabled 2FG Touchscreen Finger touch: panscroll modified to 1300
[    10.947] (--) Wacom Serial Penabled 2FG Touchscreen Finger touch: maxX=26312 maxY=16520 maxZ=0 resX=100000 resY=100000 
[    10.947] (II) Wacom Serial Penabled 2FG Touchscreen Finger touch: hotplugging dependent devices.
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger touch: Invalid type 'stylus' for this device.
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger touch: Invalid type 'eraser' for this device.
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger touch: Invalid type 'cursor' for this device.
[    10.947] (EE) Wacom Serial Penabled 2FG Touchscreen Finger touch: Invalid type 'pad' for this device.
[    10.947] (II) Wacom Serial Penabled 2FG Touchscreen Finger touch: hotplugging completed.
[    11.007] (**) Option "config_info" "udev:/sys/devices/pnp0/00:05/tty/ttyS4/serio3/input/input10/event15"
[    11.007] (II) XINPUT: Adding extended input device "Wacom Serial Penabled 2FG Touchscreen Finger touch" (type: TOUCH, id 14)
[    11.008] (**) Wacom Serial Penabled 2FG Touchscreen Finger touch: (accel) keeping acceleration scheme 1
[    11.008] (**) Wacom Serial Penabled 2FG Touchscreen Finger touch: (accel) acceleration profile 0
[    11.008] (**) Wacom Serial Penabled 2FG Touchscreen Finger touch: (accel) acceleration factor: 2.000
[    11.008] (**) Wacom Serial Penabled 2FG Touchscreen Finger touch: (accel) acceleration threshold: 4
[    11.008] (II) config/udev: Adding input device Wacom Serial Penabled 2FG Touchscreen Finger (/dev/input/mouse3)
[    11.008] (II) No input driver specified, ignoring this device.
[    11.009] (II) This device may have been added with another device file.
[    11.009] (II) config/udev: Adding input device Wacom Serial Penabled 2FG Touchscreen Pen (/dev/input/event14)
[    11.009] (**) Wacom Serial Penabled 2FG Touchscreen Pen: Applying InputClass "libinput tablet catchall"
[    11.009] (**) Wacom Serial Penabled 2FG Touchscreen Pen: Applying InputClass "Wacom USB tablet class"
[    11.009] (**) Wacom Serial Penabled 2FG Touchscreen Pen: Applying InputClass "Wacom tablet class"
[    11.009] (**) Wacom Serial Penabled 2FG Touchscreen Pen: Applying InputClass "Wacom PnP device class"
[    11.009] (II) Using input driver 'wacom' for 'Wacom Serial Penabled 2FG Touchscreen Pen'
[    11.009] (**) Wacom Serial Penabled 2FG Touchscreen Pen: always reports core events
[    11.009] (**) Option "Device" "/dev/input/event14"
[    11.010] (II) Wacom Serial Penabled 2FG Touchscreen Pen: type not specified, assuming 'stylus'.
[    11.010] (II) Wacom Serial Penabled 2FG Touchscreen Pen: other types will be automatically added.
[    11.010] (--) Wacom Serial Penabled 2FG Touchscreen Pen stylus: using pressure threshold of 851 for button 1
[    11.010] (**) Wacom Serial Penabled 2FG Touchscreen Pen stylus: panscroll is 0
[    11.010] (**) Wacom Serial Penabled 2FG Touchscreen Pen stylus: panscroll modified to 1300
[    11.010] (--) Wacom Serial Penabled 2FG Touchscreen Pen stylus: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000  tilt=disabled
[    11.010] (II) Wacom Serial Penabled 2FG Touchscreen Pen stylus: hotplugging dependent devices.
[    11.010] (EE) Wacom Serial Penabled 2FG Touchscreen Pen stylus: Invalid type 'cursor' for this device.
[    11.010] (EE) Wacom Serial Penabled 2FG Touchscreen Pen stylus: Invalid type 'touch' for this device.
[    11.010] (EE) Wacom Serial Penabled 2FG Touchscreen Pen stylus: Invalid type 'pad' for this device.
[    11.010] (II) Wacom Serial Penabled 2FG Touchscreen Pen stylus: hotplugging completed.
[    11.055] (**) Option "config_info" "udev:/sys/devices/pnp0/00:05/tty/ttyS4/serio3/input/input9/event14"
[    11.055] (II) XINPUT: Adding extended input device "Wacom Serial Penabled 2FG Touchscreen Pen stylus" (type: STYLUS, id 15)
[    11.056] (**) Wacom Serial Penabled 2FG Touchscreen Pen stylus: (accel) keeping acceleration scheme 1
[    11.056] (**) Wacom Serial Penabled 2FG Touchscreen Pen stylus: (accel) acceleration profile 0
[    11.056] (**) Wacom Serial Penabled 2FG Touchscreen Pen stylus: (accel) acceleration factor: 2.000
[    11.056] (**) Wacom Serial Penabled 2FG Touchscreen Pen stylus: (accel) acceleration threshold: 4
[    11.056] (II) config/udev: Adding input device Wacom Serial Penabled 2FG Touchscreen Pen (/dev/input/mouse2)
[    11.056] (II) No input driver specified, ignoring this device.
[    11.056] (II) This device may have been added with another device file.
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: Applying InputClass "libinput tablet catchall"
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: Applying InputClass "Wacom USB tablet class"
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: Applying InputClass "Wacom tablet class"
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: Applying InputClass "Wacom PnP device class"
[    11.081] (II) Using input driver 'wacom' for 'Wacom Serial Penabled 2FG Touchscreen Pen eraser'
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: always reports core events
[    11.081] (**) Option "Device" "/dev/input/event14"
[    11.081] (**) Option "Type" "eraser"
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: panscroll is 1300
[    11.081] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: panscroll modified to 1300
[    11.081] (--) Wacom Serial Penabled 2FG Touchscreen Pen eraser: maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000  tilt=disabled
[    11.103] (**) Option "config_info" "udev:/sys/devices/pnp0/00:05/tty/ttyS4/serio3/input/input9/event14"
[    11.103] (II) XINPUT: Adding extended input device "Wacom Serial Penabled 2FG Touchscreen Pen eraser" (type: ERASER, id 16)
[    11.104] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: (accel) keeping acceleration scheme 1
[    11.104] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: (accel) acceleration profile 0
[    11.104] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: (accel) acceleration factor: 2.000
[    11.104] (**) Wacom Serial Penabled 2FG Touchscreen Pen eraser: (accel) acceleration threshold: 4
[    12.445] (II) modeset(0): EDID vendor "LEN", prod id 16401
[    12.445] (II) modeset(0): Printing DDC gathered Modelines:
[    12.445] (II) modeset(0): Modeline "1280x800"x0.0   75.16  1280 1328 1412 1522  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    13.063] (II) modeset(0): EDID vendor "LEN", prod id 16401
[    13.064] (II) modeset(0): Printing DDC gathered Modelines:
[    13.064] (II) modeset(0): Modeline "1280x800"x0.0   75.16  1280 1328 1412 1522  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    18.436] (EE) Wacom Serial Penabled 2FG Touchscreen Pen eraser: Error reading wacom device : No such device
[    18.439] (II) config/udev: removing device Wacom Serial Penabled 2FG Touchscreen Pen stylus
[    18.439] (II) UnloadModule: "wacom"
[    18.439] (II) config/udev: removing device Wacom Serial Penabled 2FG Touchscreen Pen eraser
[    18.452] (II) UnloadModule: "wacom"
[    18.479] (EE) Wacom Serial Penabled 2FG Touchscreen Finger touch: Error reading wacom device : No such device
[    18.481] (II) config/udev: removing device Wacom Serial Penabled 2FG Touchscreen Finger touch
[    18.504] (II) UnloadModule: "wacom"
[    47.929] (II) Axis 0x1 value 5378 is outside expected range [1220, 5351]
See https://wayland.freedesktop.org/libinput/doc/1.15.5/absolute_coordinate_ranges.html for details
[    76.424] (II) modeset(0): EDID vendor "LEN", prod id 16401
[    76.424] (II) modeset(0): Printing DDC gathered Modelines:
[    76.424] (II) modeset(0): Modeline "1280x800"x0.0   75.16  1280 1328 1412 1522  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[    76.446] (II) modeset(0): EDID vendor "LEN", prod id 16401
[    76.446] (II) modeset(0): Printing DDC gathered Modelines:
[    76.446] (II) modeset(0): Modeline "1280x800"x0.0   75.16  1280 1328 1412 1522  800 803 809 823 -hsync -vsync (49.4 kHz eP)
[  1456.633] (II) modeset(0): EDID vendor "LEN", prod id 16401
[  1456.633] (II) modeset(0): Printing DDC gathered Modelines:
[  1456.633] (II) modeset(0): Modeline "1280x800"x0.0   75.16  1280 1328 1412 1522  800 803 809 823 -hsync -vsync (49.4 kHz eP)

taildragger

(Themenstarter)
Avatar von taildragger

Anmeldungsdatum:
11. Mai 2016

Beiträge: 67
Zitieren
19. März 2023 12:19 (zuletzt bearbeitet: 19. März 2023 12:19)

Ok, also ich sehe da ab Zeile 487 in der log Datei Fehler in Bezug auf das Wacom. Hmmm... Aber meine Kenntnisse reichen nicht um die richtigen Schlussfolgerungen zu ziehen.

pantomime

Anmeldungsdatum:
20. März 2013

Beiträge: 234
Zitieren
23. März 2023 07:19

Wie finde ich diese Zeile 487 in der Xorg.0.log?
Antworten |