staging.inyokaproject.org

via DuckDuckGo

NetzwerkScanner mit Canon MX395 funktioniert nicht

Status: Ungelöst | Ubuntu-Version: Ubuntu 20.04 (Focal Fossa)
Antworten |

TeTiGt

Anmeldungsdatum:
2. Dezember 2020

Beiträge: 32
Zitieren
24. Oktober 2022 14:19 (zuletzt bearbeitet: 24. Oktober 2022 17:38)

Hallo,

ich habe den Multifunktionsdrucker Canon MX395. Diesen wollte ich über Saned als Netzwerkscanner verwendet. Als Netzwerkdrucker unter CUPS funktioniert er. Also habe ich alles konfiguriert wie in https://wiki.ubuntuusers.de/SANE-Scanserver_im_Netzwerk/ beschrieben. Darauf hin gibt 

1
saned-find-scanner

den folgende Fehler aus:

# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x0bda [Generic], product=0x0129 [USB2.0-CRW]) at libusb:001:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.

# You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.

Das kann aber nicht der Scanner sein, der gesucht ist(Ich habe auch keinen anderen angeschlossen), da der Scanner auf der Host Seite an libusb:001:002 anliegt. Anschließend habe ich versucht, mit scanimage -L den Drucker zu finden. Dabei erhielt ich die Mitteilung, dass kein Drucker gefunden wurde. Dann habe ich den Schritt aus dieser Anleitung https://wiki.archlinux.org/title/SANE/Scanner-specific_problems unter Abschnitt "4 Canon" befolgt. Seitdem erhalte ich mit scanimage -L:

54.525702 [bjnp] udp_command: ERROR - no data received (timeout = 10000) 54.525822 [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this scanner Error my backend : out of memory

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

Jetzt habe ich gehört mit scangearmp2 soll er den Scanner finden. Das funktioniert allerdings auch nicht. Und mehr finde ich im Internet dazu nicht. Was könnte jetzt das Problem sein?

Eine Firewall müsste nicht aktiviert sein, zumindest habe ich keine extra installiert/konfiguriert.

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19527
Zitieren
26. Oktober 2022 14:38

Zeige doch mal die Terminal Ausgaben von 

export SANE_DEBUG_DLL=255 && scanimage -L

und 

dpkg -l | egrep 'ippusbxd|ipp-usb|libusb-0.1-4|scangear*|cnij*'

um sich erst mal einen Überblick zu verschaffen.

TeTiGt

(Themenstarter)

Anmeldungsdatum:
2. Dezember 2020

Beiträge: 32
Zitieren
27. Oktober 2022 15:07 (zuletzt bearbeitet: 27. Oktober 2022 15:11) 
1
export SANE_DEBUG_DLL=255 && scanimage -L

ergibt

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
[15:09:59.083367] [sanei_debug] Setting debug level of dll to 255.
[15:09:59.083452] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29
[15:09:59.083466] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[15:09:59.083483] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[15:09:59.083513] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[15:09:59.083544] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/mfp2
[15:09:59.083567] [dll] sane_init/read_config: reading dll.d/mfp2
[15:09:59.083599] [dll] add_backend: adding backend `canon_pixma'
[15:09:59.083621] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[15:09:59.083655] [dll] sane_init/read_config: reading dll.d/hplip
[15:09:59.083679] [dll] add_backend: adding backend `hpaio'
[15:09:59.083701] [dll] sane_init/read_dlld: done.
[15:09:59.083729] [dll] sane_init/read_config: reading dll.conf
[15:09:59.083759] [dll] add_backend: adding backend `net'
[15:09:59.083772] [dll] add_backend: adding backend `abaton'
[15:09:59.083789] [dll] add_backend: adding backend `agfafocus'
[15:09:59.083809] [dll] add_backend: adding backend `apple'
[15:09:59.083830] [dll] add_backend: adding backend `artec'
[15:09:59.083851] [dll] add_backend: adding backend `artec_eplus48u'
[15:09:59.083872] [dll] add_backend: adding backend `as6e'
[15:09:59.083892] [dll] add_backend: adding backend `avision'
[15:09:59.083913] [dll] add_backend: adding backend `bh'
[15:09:59.083933] [dll] add_backend: adding backend `canon'
[15:09:59.083954] [dll] add_backend: adding backend `canon630u'
[15:09:59.083975] [dll] add_backend: adding backend `canon_dr'
[15:09:59.083996] [dll] add_backend: adding backend `cardscan'
[15:09:59.084016] [dll] add_backend: adding backend `coolscan'
[15:09:59.084037] [dll] add_backend: adding backend `coolscan3'
[15:09:59.084059] [dll] add_backend: adding backend `dell1600n_net'
[15:09:59.084080] [dll] add_backend: adding backend `dmc'
[15:09:59.084101] [dll] add_backend: adding backend `epjitsu'
[15:09:59.084121] [dll] add_backend: adding backend `epson2'
[15:09:59.084143] [dll] add_backend: adding backend `epsonds'
[15:09:59.084165] [dll] add_backend: adding backend `escl'
[15:09:59.084186] [dll] add_backend: adding backend `fujitsu'
[15:09:59.084209] [dll] add_backend: adding backend `genesys'
[15:09:59.084230] [dll] add_backend: adding backend `gt68xx'
[15:09:59.084251] [dll] add_backend: adding backend `hp'
[15:09:59.084272] [dll] add_backend: adding backend `hp3500'
[15:09:59.084293] [dll] add_backend: adding backend `hp3900'
[15:09:59.084313] [dll] add_backend: adding backend `hp4200'
[15:09:59.084333] [dll] add_backend: adding backend `hp5400'
[15:09:59.084354] [dll] add_backend: adding backend `hp5590'
[15:09:59.084374] [dll] add_backend: adding backend `hpljm1005'
[15:09:59.084395] [dll] add_backend: adding backend `hpsj5s'
[15:09:59.084417] [dll] add_backend: adding backend `hs2p'
[15:09:59.084437] [dll] add_backend: adding backend `ibm'
[15:09:59.084461] [dll] add_backend: adding backend `kodak'
[15:09:59.084488] [dll] add_backend: adding backend `kodakaio'
[15:09:59.084510] [dll] add_backend: adding backend `kvs1025'
[15:09:59.084532] [dll] add_backend: adding backend `kvs20xx'
[15:09:59.084553] [dll] add_backend: adding backend `kvs40xx'
[15:09:59.084574] [dll] add_backend: adding backend `leo'
[15:09:59.084597] [dll] add_backend: adding backend `lexmark'
[15:09:59.084619] [dll] add_backend: adding backend `ma1509'
[15:09:59.084640] [dll] add_backend: adding backend `magicolor'
[15:09:59.084662] [dll] add_backend: adding backend `matsushita'
[15:09:59.084683] [dll] add_backend: adding backend `microtek'
[15:09:59.084706] [dll] add_backend: adding backend `microtek2'
[15:09:59.084727] [dll] add_backend: adding backend `mustek'
[15:09:59.084748] [dll] add_backend: adding backend `mustek_usb'
[15:09:59.084770] [dll] add_backend: adding backend `mustek_usb2'
[15:09:59.084791] [dll] add_backend: adding backend `nec'
[15:09:59.084812] [dll] add_backend: adding backend `niash'
[15:09:59.084834] [dll] add_backend: adding backend `pie'
[15:09:59.084856] [dll] add_backend: adding backend `pieusb'
[15:09:59.084878] [dll] add_backend: adding backend `pint'
[15:09:59.084899] [dll] add_backend: adding backend `pixma'
[15:09:59.084921] [dll] add_backend: adding backend `plustek'
[15:09:59.084942] [dll] add_backend: adding backend `qcam'
[15:09:59.084964] [dll] add_backend: adding backend `ricoh'
[15:09:59.084991] [dll] add_backend: adding backend `ricoh2'
[15:09:59.085013] [dll] add_backend: adding backend `rts8891'
[15:09:59.085035] [dll] add_backend: adding backend `s9036'
[15:09:59.085056] [dll] add_backend: adding backend `sceptre'
[15:09:59.085077] [dll] add_backend: adding backend `sharp'
[15:09:59.085099] [dll] add_backend: adding backend `sm3600'
[15:09:59.085122] [dll] add_backend: adding backend `sm3840'
[15:09:59.085144] [dll] add_backend: adding backend `snapscan'
[15:09:59.085165] [dll] add_backend: adding backend `sp15c'
[15:09:59.085188] [dll] add_backend: adding backend `tamarack'
[15:09:59.085210] [dll] add_backend: adding backend `teco1'
[15:09:59.085232] [dll] add_backend: adding backend `teco2'
[15:09:59.085252] [dll] add_backend: adding backend `teco3'
[15:09:59.085274] [dll] add_backend: adding backend `u12'
[15:09:59.085296] [dll] add_backend: adding backend `umax'
[15:09:59.085318] [dll] add_backend: adding backend `umax1220u'
[15:09:59.085341] [dll] add_backend: adding backend `v4l'
[15:09:59.085361] [dll] add_backend: adding backend `xerox_mfp'
[15:09:59.085410] [dll] sane_get_devices
[15:09:59.085428] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.085449] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[15:09:59.085480] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[15:09:59.085666] [dll] init: initializing backend `xerox_mfp'
[15:09:59.464191] [dll] init: backend `xerox_mfp' is version 1.0.13
[15:09:59.464540] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.464586] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[15:09:59.464629] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[15:09:59.464675] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[15:09:59.464735] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[15:09:59.464795] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[15:09:59.464855] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[15:09:59.464905] [dll] load: couldn't find backend `v4l' (No such file or directory)
[15:09:59.464949] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.464976] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[15:09:59.465035] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[15:09:59.465482] [dll] init: initializing backend `umax1220u'
[15:09:59.500319] [dll] init: backend `umax1220u' is version 1.0.2
[15:09:59.500366] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.500389] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[15:09:59.500445] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[15:09:59.500807] [dll] init: initializing backend `umax'
[15:09:59.555708] [dll] init: backend `umax' is version 1.0.45
[15:09:59.555747] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.555768] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[15:09:59.555827] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[15:09:59.556170] [dll] init: initializing backend `u12'
[15:09:59.604374] [dll] init: backend `u12' is version 1.0.0
[15:09:59.604416] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.604472] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[15:09:59.604535] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[15:09:59.604809] [dll] init: initializing backend `teco3'
[15:09:59.606725] [dll] init: backend `teco3' is version 1.0.1
[15:09:59.606783] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.606832] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[15:09:59.606902] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[15:09:59.607135] [dll] init: initializing backend `teco2'
[15:09:59.609470] [dll] init: backend `teco2' is version 1.0.10
[15:09:59.609500] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.609520] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[15:09:59.609563] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[15:09:59.609751] [dll] init: initializing backend `teco1'
[15:09:59.611296] [dll] init: backend `teco1' is version 1.0.10
[15:09:59.611325] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.611345] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[15:09:59.611397] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[15:09:59.611668] [dll] init: initializing backend `tamarack'
[15:09:59.612369] [dll] init: backend `tamarack' is version 1.0.0
[15:09:59.612398] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.612418] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[15:09:59.612460] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[15:09:59.612652] [dll] init: initializing backend `sp15c'
[15:09:59.612957] [dll] init: backend `sp15c' is version 1.0.0
[15:09:59.612984] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.613011] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[15:09:59.613056] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[15:09:59.613366] [dll] init: initializing backend `snapscan'
[15:09:59.652841] [dll] init: backend `snapscan' is version 1.4.53
[15:09:59.652886] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.652923] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[15:09:59.652964] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[15:09:59.653280] [dll] init: initializing backend `sm3840'
[15:09:59.704360] [dll] init: backend `sm3840' is version 1.0.0
[15:09:59.704412] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.704438] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[15:09:59.704496] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[15:09:59.704884] [dll] init: initializing backend `sm3600'
[15:09:59.760199] [dll] init: backend `sm3600' is version 1.0.6
[15:09:59.760255] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.760285] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[15:09:59.760337] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[15:09:59.760711] [dll] init: initializing backend `sharp'
[15:09:59.761660] [dll] init: backend `sharp' is version 1.0.0
[15:09:59.761695] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.761721] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[15:09:59.761779] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[15:09:59.762005] [dll] init: initializing backend `sceptre'
[15:09:59.762922] [dll] init: backend `sceptre' is version 1.0.10
[15:09:59.762956] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.762981] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[15:09:59.763038] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[15:09:59.763265] [dll] init: initializing backend `s9036'
[15:09:59.763948] [dll] init: backend `s9036' is version 1.0.0
[15:09:59.763983] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.764008] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[15:09:59.764063] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[15:09:59.764408] [dll] init: initializing backend `rts8891'
[15:09:59.800210] [dll] init: backend `rts8891' is version 1.0.2401
[15:09:59.844278] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.844330] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[15:09:59.844376] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[15:09:59.844773] [dll] init: initializing backend `ricoh2'
[15:09:59.904340] [dll] init: backend `ricoh2' is version 1.0.0
[15:09:59.904403] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.904454] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[15:09:59.904552] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[15:09:59.904994] [dll] init: initializing backend `ricoh'
[15:09:59.905795] [dll] init: backend `ricoh' is version 1.0.0
[15:09:59.905837] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.905866] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[15:09:59.905928] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[15:09:59.906242] [dll] init: initializing backend `qcam'
[15:09:59.906359] [dll] init: backend `qcam' is version 1.0.0
[15:09:59.906414] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.906462] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[15:09:59.906532] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[15:09:59.906925] [dll] init: initializing backend `plustek'
[15:09:59.961464] [dll] init: backend `plustek' is version 1.0.0
[15:09:59.961529] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:09:59.961590] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[15:09:59.961656] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[15:09:59.962317] [dll] init: initializing backend `pixma'
[15:10:00.000205] [dll] init: backend `pixma' is version 1.0.27
[15:10:00.043945] [bjnp] udp_command: ERROR - no data received (timeout = 10000)
[15:10:00.044057] [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this scanner
[15:10:00.565736] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.565796] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[15:10:00.565842] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[15:10:00.565883] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[15:10:00.565929] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[15:10:00.565969] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[15:10:00.566016] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[15:10:00.566059] [dll] load: couldn't find backend `pint' (No such file or directory)
[15:10:00.566095] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.566134] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[15:10:00.566201] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[15:10:00.566689] [dll] init: initializing backend `pieusb'
[15:10:00.603949] [dll] init: backend `pieusb' is version 1.0.1
[15:10:00.603980] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.603996] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[15:10:00.604029] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[15:10:00.604254] [dll] init: initializing backend `pie'
[15:10:00.605228] [dll] init: backend `pie' is version 1.0.9
[15:10:00.605259] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.605283] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[15:10:00.605316] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[15:10:00.605598] [dll] init: initializing backend `niash'
[15:10:00.611489] [dll] init: backend `niash' is version 1.0.1
[15:10:00.611517] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.611536] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[15:10:00.611568] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[15:10:00.611754] [dll] init: initializing backend `nec'
[15:10:00.612099] [dll] init: backend `nec' is version 1.0.0
[15:10:00.612117] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.612129] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[15:10:00.612149] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[15:10:00.612339] [dll] init: initializing backend `mustek_usb2'
[15:10:00.612371] [dll] init: backend `mustek_usb2' is version 1.0.10
[15:10:00.660596] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.660656] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[15:10:00.660711] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[15:10:00.661269] [dll] init: initializing backend `mustek_usb'
[15:10:00.712442] [dll] init: backend `mustek_usb' is version 1.0.18
[15:10:00.712501] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.712533] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[15:10:00.712603] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[15:10:00.713208] [dll] init: initializing backend `mustek'
[15:10:00.714914] [dll] init: backend `mustek' is version 1.0.138
[15:10:00.714954] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.714983] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[15:10:00.715047] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[15:10:00.715371] [dll] init: initializing backend `microtek2'
[15:10:00.716451] [dll] init: backend `microtek2' is version 1.0.0
[15:10:00.716520] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.716565] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[15:10:00.716628] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[15:10:00.716925] [dll] init: initializing backend `microtek'
[15:10:00.718060] [dll] init: backend `microtek' is version 1.0.0
[15:10:00.718104] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.718136] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[15:10:00.718187] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[15:10:00.718485] [dll] init: initializing backend `matsushita'
[15:10:00.720772] [dll] init: backend `matsushita' is version 1.0.7
[15:10:00.720828] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:00.720870] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[15:10:00.720935] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[15:10:00.723579] [dll] init: initializing backend `magicolor'
[15:10:00.759928] [dll] init: backend `magicolor' is version 1.0.1
[15:10:02.316662] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.316696] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[15:10:02.316730] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[15:10:02.316929] [dll] init: initializing backend `ma1509'
[15:10:02.348023] [dll] init: backend `ma1509' is version 1.0.3
[15:10:02.348047] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.348059] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[15:10:02.348077] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[15:10:02.348300] [dll] init: initializing backend `lexmark'
[15:10:02.352978] [dll] init: backend `lexmark' is version 1.0.32
[15:10:02.353205] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.353226] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[15:10:02.353256] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[15:10:02.353418] [dll] init: initializing backend `leo'
[15:10:02.353973] [dll] init: backend `leo' is version 1.0.11
[15:10:02.353990] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.354001] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[15:10:02.354019] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[15:10:02.354214] [dll] init: initializing backend `kvs40xx'
[15:10:02.404114] [dll] init: backend `kvs40xx' is version 1.0.1
[15:10:02.404965] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.405021] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[15:10:02.405075] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[15:10:02.405457] [dll] init: initializing backend `kvs20xx'
[15:10:02.448320] [dll] init: backend `kvs20xx' is version 1.0.2
[15:10:02.450420] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.450470] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[15:10:02.450544] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[15:10:02.451091] [dll] init: initializing backend `kvs1025'
[15:10:02.489118] [dll] init: backend `kvs1025' is version 1.0.5
[15:10:02.489186] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:02.489239] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[15:10:02.489319] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[15:10:02.491802] [dll] init: initializing backend `kodakaio'
[15:10:02.544541] [dll] init: backend `kodakaio' is version 1.0.3
[15:10:04.508891] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.508978] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[15:10:04.509087] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[15:10:04.509642] [dll] init: initializing backend `kodak'
[15:10:04.509740] [dll] init: backend `kodak' is version 1.0.7
[15:10:04.510365] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.510440] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[15:10:04.510523] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[15:10:04.510906] [dll] init: initializing backend `ibm'
[15:10:04.511866] [dll] init: backend `ibm' is version 1.0.0
[15:10:04.511917] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.512004] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[15:10:04.512098] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[15:10:04.512591] [dll] init: initializing backend `hs2p'
[15:10:04.514384] [dll] init: backend `hs2p' is version 1.0.0
[15:10:04.514469] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.514571] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[15:10:04.514681] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[15:10:04.515376] [dll] init: initializing backend `hpsj5s'
[15:10:04.515636] [dll] init: backend `hpsj5s' is version 1.0.3
[15:10:04.515698] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.515757] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[15:10:04.515837] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[15:10:04.516443] [dll] init: initializing backend `hpljm1005'
[15:10:04.560690] [dll] init: backend `hpljm1005' is version 1.0.1
[15:10:04.560796] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.560854] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[15:10:04.560937] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[15:10:04.561580] [dll] init: initializing backend `hp5590'
[15:10:04.600356] [dll] init: backend `hp5590' is version 1.0.8
[15:10:04.600424] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.600475] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[15:10:04.600572] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[15:10:04.601127] [dll] init: initializing backend `hp5400'
[15:10:04.640645] [dll] init: backend `hp5400' is version 1.0.3
[15:10:04.640721] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.640786] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[15:10:04.640866] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[15:10:04.641458] [dll] init: initializing backend `hp4200'
[15:10:04.680409] [dll] init: backend `hp4200' is version 1.0.0
[15:10:04.680472] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.680507] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[15:10:04.680582] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[15:10:04.682223] [dll] init: initializing backend `hp3900'
[15:10:04.728221] [dll] init: backend `hp3900' is version 1.0.0
[15:10:04.728266] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.728292] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[15:10:04.728341] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[15:10:04.728759] [dll] init: initializing backend `hp3500'
[15:10:04.780514] [dll] init: backend `hp3500' is version 1.0.0
[15:10:04.780658] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.780740] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[15:10:04.780844] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[15:10:04.781670] [dll] init: initializing backend `hp'
[15:10:04.781826] [dll] init: backend `hp' is version 1.0.8
[15:10:04.824470] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.824760] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[15:10:04.824860] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[15:10:04.825626] [dll] init: initializing backend `gt68xx'
[15:10:04.868140] [dll] init: backend `gt68xx' is version 1.0.84
[15:10:04.868657] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.868690] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[15:10:04.868727] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[15:10:04.869722] [dll] init: initializing backend `genesys'
[15:10:04.878899] [dll] init: backend `genesys' is version 1.0.0
[15:10:04.879325] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.879355] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[15:10:04.879534] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[15:10:04.879819] [dll] init: initializing backend `fujitsu'
[15:10:04.879871] [dll] init: backend `fujitsu' is version 1.0.134
[15:10:04.937556] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:04.937663] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[15:10:04.937777] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[15:10:04.974290] [dll] init: initializing backend `escl'
[15:10:04.974590] [dll] init: backend `escl' is version 1.0.0
[15:10:05.985297] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:05.985415] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[15:10:05.985546] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[15:10:05.986472] [dll] init: initializing backend `epsonds'
[15:10:06.030071] [dll] init: backend `epsonds' is version 1.0.0
[15:10:06.030311] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:06.030387] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[15:10:06.030484] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[15:10:06.031173] [dll] init: initializing backend `epson2'
[15:10:06.080687] [dll] init: backend `epson2' is version 1.0.124
[15:10:07.083069] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.083187] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[15:10:07.083314] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[15:10:07.084291] [dll] init: initializing backend `epjitsu'
[15:10:07.084408] [dll] init: backend `epjitsu' is version 1.0.31
[15:10:07.129134] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.129398] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[15:10:07.129529] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[15:10:07.130117] [dll] init: initializing backend `dmc'
[15:10:07.131214] [dll] init: backend `dmc' is version 1.0.0
[15:10:07.131272] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.131326] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[15:10:07.131480] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[15:10:07.132110] [dll] init: initializing backend `dell1600n_net'
[15:10:07.132198] [dll] init: backend `dell1600n_net' is version 1.0.0
[15:10:07.432879] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.432981] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[15:10:07.433090] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[15:10:07.433816] [dll] init: initializing backend `coolscan3'
[15:10:07.476506] [dll] init: backend `coolscan3' is version 1.0.0
[15:10:07.477221] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.477303] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[15:10:07.477397] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[15:10:07.478130] [dll] init: initializing backend `coolscan'
[15:10:07.479845] [dll] init: backend `coolscan' is version 1.0.0
[15:10:07.479936] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.479994] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[15:10:07.480115] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[15:10:07.480834] [dll] init: initializing backend `cardscan'
[15:10:07.520965] [dll] init: backend `cardscan' is version 1.0.3
[15:10:07.521200] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.521270] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[15:10:07.521342] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[15:10:07.522033] [dll] init: initializing backend `canon_dr'
[15:10:07.522158] [dll] init: backend `canon_dr' is version 1.0.58
[15:10:07.586046] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.586162] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[15:10:07.586251] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[15:10:07.587013] [dll] init: initializing backend `canon630u'
[15:10:07.628490] [dll] init: backend `canon630u' is version 1.0.1
[15:10:07.628578] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.628650] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[15:10:07.628723] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[15:10:07.629275] [dll] init: initializing backend `canon'
[15:10:07.629879] [dll] init: backend `canon' is version 1.0.0
[15:10:07.629928] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.629965] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[15:10:07.630022] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[15:10:07.630399] [dll] init: initializing backend `bh'
[15:10:07.631917] [dll] init: backend `bh' is version 1.0.4
[15:10:07.631970] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.632006] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[15:10:07.632064] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[15:10:07.632635] [dll] init: initializing backend `avision'
[15:10:07.683565] [dll] init: backend `avision' is version 1.0.297
[15:10:07.749610] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.749660] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[15:10:07.749702] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[15:10:07.750045] [dll] init: initializing backend `as6e'
[15:10:07.750162] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.750202] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[15:10:07.750265] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[15:10:07.750682] [dll] init: initializing backend `artec_eplus48u'
[15:10:07.783982] [dll] init: backend `artec_eplus48u' is version 1.0.0
[15:10:07.784014] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.784027] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[15:10:07.784057] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[15:10:07.784263] [dll] init: initializing backend `artec'
[15:10:07.784725] [dll] init: backend `artec' is version 1.0.0
[15:10:07.784743] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.784755] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[15:10:07.784773] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[15:10:07.784917] [dll] init: initializing backend `apple'
[15:10:07.785321] [dll] init: backend `apple' is version 1.0.0
[15:10:07.785336] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.785348] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[15:10:07.785365] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[15:10:07.785488] [dll] init: initializing backend `agfafocus'
[15:10:07.785778] [dll] init: backend `agfafocus' is version 1.0.0
[15:10:07.785793] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.785804] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[15:10:07.785822] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[15:10:07.785939] [dll] init: initializing backend `abaton'
[15:10:07.786349] [dll] init: backend `abaton' is version 1.0.0
[15:10:07.786369] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:07.786389] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[15:10:07.786409] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[15:10:07.786573] [dll] init: initializing backend `net'
[15:10:07.790760] [dll] init: backend `net' is version 1.0.29
[15:10:30.183521] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:30.183555] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[15:10:30.183592] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[15:10:30.185064] [dll] init: initializing backend `hpaio'
[15:10:30.186301] [dll] init: backend `hpaio' is version 1.0.0
[15:10:31.584151] [dll] load: searching backend `canon_pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[15:10:31.584279] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_pixma.so.1'
[15:10:31.584448] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_pixma.so.1'
[15:10:31.586458] [dll] init: initializing backend `canon_pixma'
[15:10:32.616587] [dll] init: backend `canon_pixma' is version 1.0.0
Error my backend :	out of memory
[15:10:32.616759] [dll] sane_get_devices: found 1 devices
[15:10:32.616892] [dll] sane_exit: exiting
[15:10:32.616965] [dll] sane_exit: calling backend `xerox_mfp's exit function
[15:10:32.617339] [dll] sane_exit: calling backend `umax1220u's exit function
[15:10:32.617687] [dll] sane_exit: calling backend `umax's exit function
[15:10:32.618005] [dll] sane_exit: calling backend `u12's exit function
[15:10:32.618303] [dll] sane_exit: calling backend `teco3's exit function
[15:10:32.618597] [dll] sane_exit: calling backend `teco2's exit function
[15:10:32.618878] [dll] sane_exit: calling backend `teco1's exit function
[15:10:32.619157] [dll] sane_exit: calling backend `tamarack's exit function
[15:10:32.619488] [dll] sane_exit: calling backend `sp15c's exit function
[15:10:32.619786] [dll] sane_exit: calling backend `snapscan's exit function
[15:10:32.620059] [dll] sane_exit: calling backend `sm3840's exit function
[15:10:32.620285] [dll] sane_exit: calling backend `sm3600's exit function
[15:10:32.620533] [dll] sane_exit: calling backend `sharp's exit function
[15:10:32.620746] [dll] sane_exit: calling backend `sceptre's exit function
[15:10:32.620943] [dll] sane_exit: calling backend `s9036's exit function
[15:10:32.621133] [dll] sane_exit: calling backend `rts8891's exit function
[15:10:32.621331] [dll] sane_exit: calling backend `ricoh2's exit function
[15:10:32.621666] [dll] sane_exit: calling backend `ricoh's exit function
[15:10:32.621882] [dll] sane_exit: calling backend `qcam's exit function
[15:10:32.622077] [dll] sane_exit: calling backend `plustek's exit function
[15:10:32.622323] [dll] sane_exit: calling backend `pixma's exit function
[15:10:32.622563] [dll] sane_exit: calling backend `pieusb's exit function
[15:10:32.622778] [dll] sane_exit: calling backend `pie's exit function
[15:10:32.623007] [dll] sane_exit: calling backend `niash's exit function
[15:10:32.623222] [dll] sane_exit: calling backend `nec's exit function
[15:10:32.623475] [dll] sane_exit: calling backend `mustek_usb2's exit function
[15:10:32.623717] [dll] sane_exit: calling backend `mustek_usb's exit function
[15:10:32.623919] [dll] sane_exit: calling backend `mustek's exit function
[15:10:32.624107] [dll] sane_exit: calling backend `microtek2's exit function
[15:10:32.624305] [dll] sane_exit: calling backend `microtek's exit function
[15:10:32.624536] [dll] sane_exit: calling backend `matsushita's exit function
[15:10:32.624739] [dll] sane_exit: calling backend `magicolor's exit function
[15:10:32.624949] [dll] sane_exit: calling backend `ma1509's exit function
[15:10:32.625194] [dll] sane_exit: calling backend `lexmark's exit function
[15:10:32.625523] [dll] sane_exit: calling backend `leo's exit function
[15:10:32.625738] [dll] sane_exit: calling backend `kvs40xx's exit function
[15:10:32.625966] [dll] sane_exit: calling backend `kvs20xx's exit function
[15:10:32.626214] [dll] sane_exit: calling backend `kvs1025's exit function
[15:10:32.626432] [dll] sane_exit: calling backend `kodakaio's exit function
[15:10:32.626678] [dll] sane_exit: calling backend `kodak's exit function
[15:10:32.626908] [dll] sane_exit: calling backend `ibm's exit function
[15:10:32.627119] [dll] sane_exit: calling backend `hs2p's exit function
[15:10:32.627352] [dll] sane_exit: calling backend `hpsj5s's exit function
[15:10:32.627657] [dll] sane_exit: calling backend `hpljm1005's exit function
[15:10:32.627886] [dll] sane_exit: calling backend `hp5590's exit function
[15:10:32.628107] [dll] sane_exit: calling backend `hp5400's exit function
[15:10:32.628327] [dll] sane_exit: calling backend `hp4200's exit function
[15:10:32.628538] [dll] sane_exit: calling backend `hp3900's exit function
[15:10:32.628756] [dll] sane_exit: calling backend `hp3500's exit function
[15:10:32.628915] [dll] sane_exit: calling backend `hp's exit function
[15:10:32.629088] [dll] sane_exit: calling backend `gt68xx's exit function
[15:10:32.629347] [dll] sane_exit: calling backend `genesys's exit function
[15:10:32.630035] [dll] sane_exit: calling backend `fujitsu's exit function
[15:10:32.630223] [dll] sane_exit: calling backend `escl's exit function
[15:10:32.631950] [dll] sane_exit: calling backend `epsonds's exit function
[15:10:32.632123] [dll] sane_exit: calling backend `epson2's exit function
[15:10:32.632274] [dll] sane_exit: calling backend `epjitsu's exit function
[15:10:32.632432] [dll] sane_exit: calling backend `dmc's exit function
[15:10:32.632573] [dll] sane_exit: calling backend `dell1600n_net's exit function
[15:10:32.633064] [dll] sane_exit: calling backend `coolscan3's exit function
[15:10:32.633293] [dll] sane_exit: calling backend `coolscan's exit function
[15:10:32.633531] [dll] sane_exit: calling backend `cardscan's exit function
[15:10:32.633751] [dll] sane_exit: calling backend `canon_dr's exit function
[15:10:32.633947] [dll] sane_exit: calling backend `canon630u's exit function
[15:10:32.634136] [dll] sane_exit: calling backend `canon's exit function
[15:10:32.634318] [dll] sane_exit: calling backend `bh's exit function
[15:10:32.634519] [dll] sane_exit: calling backend `avision's exit function
[15:10:32.634852] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[15:10:32.635055] [dll] sane_exit: calling backend `artec's exit function
[15:10:32.635283] [dll] sane_exit: calling backend `apple's exit function
[15:10:32.635565] [dll] sane_exit: calling backend `agfafocus's exit function
[15:10:32.635766] [dll] sane_exit: calling backend `abaton's exit function
[15:10:32.635943] [dll] sane_exit: calling backend `net's exit function
[15:10:32.638184] [dll] sane_exit: calling backend `hpaio's exit function
[15:10:32.640924] [dll] sane_exit: calling backend `canon_pixma's exit function
[15:10:32.641634] [dll] sane_exit: finished

Und 

1
dpkg -l | egrep 'ippusbxd|ipp-usb|libusb-0.1-4|scangear*|cnij*'

ergibt 

1
2
3
4
5

ii  cnijfilter2                                6.30-1+2004                         amd64        IJ Printer Driver for Linux.
ii  ippusbxd                                   1.34-2ubuntu1                       amd64        Daemon for IPP USB printer support
ii  libusb-0.1-4:amd64                         2:0.1.12-32                         amd64        userspace USB programming library
ii  scangearmp2                                4.40.0-2ubuntu20.04                 amd64        ScanGear MP for Linux.

TeTiGt

(Themenstarter)

Anmeldungsdatum:
2. Dezember 2020

Beiträge: 32
Zitieren
27. Oktober 2022 15:14 (zuletzt bearbeitet: 27. Oktober 2022 15:16)

Ich habe nichts geändert. Aber komischerweise funktioniert jetzt auf einmal der Netzwerk Scanner. Woran liegt das jetzt auf einmal? Ich bin ratlos. Zumindest der Standardt vorinstallierte Dokumentenscanner findet einen Scanner und scannt auch problemlos. Scangearmp2 findet keinen Scanner

Kellerkind_2009

Avatar von Kellerkind_2009

Anmeldungsdatum:
26. November 2009

Beiträge: 19527
Zitieren
27. Oktober 2022 16:18

Führe aus 

sudo rm /etc/sane.d/dll.d/mfp2

sowie 

sudo apt purge ippusbxd

Dann Neustart und Scannen.Wenn Funktioniert,dann mit Scangearmp2 im Terminal versuchen und die Ausgabe zeigen 

scangearmp2
Antworten |