staging.inyokaproject.org

via DuckDuckGo

Wemos D1 Mini - flashen funktioniert oft nicht

Status: Gelöst | Ubuntu-Version: Ubuntu 20.04 (Focal Fossa)
Antworten |

Shor-ty

Anmeldungsdatum:
10. September 2010

Beiträge: 714
Zitieren
19. April 2022 22:59 (zuletzt bearbeitet: 19. April 2022 23:01)

Hallo zusammen,

ich würde mich jetzt doch gerne bei Euch erkundigen. Und zwar hab ich hier ein ganz komisches Verhalten an einem Mini-Chip (Wemos D1 Mini). Dieser ist via USB an meinen Laptop angeschlossen. Nachdem ich ein kleines Programm geschrieben habe (Arduino) und dieses anschließend auf den Chip hochladen möchte, kommt zu willkürlich folgender Fehler: 

/home/shorty/.arduino15/packages/esp8266/tools/python3/3.7.2-post1/python3 -I /home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/upload.py --chip esp8266 --port /dev/ttyUSB0 --baud 460800 --before default_reset --after hard_reset write_flash 0x0 /tmp/arduino_build_713690/DIYCharger.ino.bin 
esptool.py v3.0
Serial port /dev/ttyUSB0
Traceback (most recent call last):
  File "/home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/upload.py", line 66, in <module>
    esptool.main(cmdline)
  File "/home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/esptool/esptool.py", line 3551, in main
    esp = chip_class(each_port, initial_baud, args.trace)
  File "/home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/esptool/esptool.py", line 271, in __init__
    self._port = serial.serial_for_url(port)
  File "/home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/pyserial/serial/__init__.py", line 90, in serial_for_url
    instance.open()
  File "/home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/pyserial/serial/serialposix.py", line 336, in open
    self._update_dtr_state()
  File "/home/shorty/.arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/pyserial/serial/serialposix.py", line 713, in _update_dtr_state
    fcntl.ioctl(self.fd, TIOCMBIS, TIOCM_DTR_str)
OSError: [Errno 71] Protocol error
OSError: [Errno 71] Protocol error

Das interessante dabei ist aber, dass ich oftmals 20x flashen kann, ohne irgendwelche Probleme. Anschließend kommts wieder vor, dass ich 5 - 10 x den Upload neu-starten muss, bis eine Verbindung aufgebaut werden kann und die Übertragung stattfindet.

Das mein Laptop (Hardwareseitig) mit dem Chip nicht kompatibel ist, würde ich prinzipiell ausschließen, da ich ja sonst überhaupt keine Verbindung aufbauen könnte. * Hab schon drei USB Kabel getestet * Mehrere D1 Minis (immer das gleiche Verhalten) * Meine zwei USB Slots am Laptop (2.0 und 3.0 - macht keinen Unterschied)

Der Chip (HL-340) scheint erkannt worden zu sein: 

1
2
3
4
5
6
shorty@cfd:~$ lsusb 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b52b Chicony Electronics Co., Ltd USB2.0 VGA UVC WebCam
Bus 001 Device 002: ID 0bda:b721 Realtek Semiconductor Corp. Bluetooth Radio 
Bus 001 Device 034: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Allerdings erhalte ich beim Upload meines Programms (wie erwähnt) immer wieder den Fehlercode 71 und ich finde nicht heraus an was es liegt. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
[76641.692679] usb 1-1: new full-speed USB device number 34 using xhci_hcd
[76641.841309] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[76641.841312] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[76641.841314] usb 1-1: Product: USB2.0-Ser!
[76641.842360] ch341 1-1:1.0: ch341-uart converter detected
[76641.842775] usb 1-1: ch341-uart converter now attached to ttyUSB0
[76655.436826] usb 1-1: failed to send control message: -71
[76655.437051] usb 1-1: failed to send control message: -71
[76655.437208] usb 1-1: failed to send control message: -71
[76655.437372] usb 1-1: failed to send control message: -71
[76749.044751] usb 1-1: failed to send control message: -71
[76749.392406] usb 1-1: failed to send control message: -71
[76762.755803] usb 1-1: failed to send control message: -71
[76762.756013] usb 1-1: failed to send control message: -71
[76763.280184] usb 1-1: failed to send control message: -71
[76763.280624] usb 1-1: failed to send control message: -71
[76777.295202] usb 1-1: failed to send control message: -71
[76868.194651] usb 1-1: failed to send control message: -71
[76922.435530] usb 1-1: failed to send control message: -71
[76922.435811] usb 1-1: failed to send control message: -71

Irgendwelche Ideen von Eurer Seite? Gerne liefere ich noch weitere Informationen. Tatsächlich ist das doch etwas ärgerlich.

In der upload.py Datei ist in der Zeile 66 folgendes: 

1
esptool.main(cmdline)

ob das nun jemandem weiterhilft den Fehler einzugrenzen, weiß ich nicht.

Danke schonmal fürs Durchlesen. Tobi

shiro

Anmeldungsdatum:
20. Juli 2020

Beiträge: 611
Zitieren
19. April 2022 23:53

Hallo Shor-ty,

OSError: [Errno 71] Protocol error

Das ist normalerweise ein Fehler im USB Link (CP210, CH341, ...?).

  • Welche Entwicklungsumgebung verwendest du (Arduino IDE ... welche Version)?

  • Wie hast du die IDE installiert? (apt, dpkg, snap, flatpak ...)

  • Was sagt das syslog (dmesg oder "journalctl -k") bezüglich Kernel-USB Fehler?

Ich habe leider keinen Wemos D1 aber Arduinos mit ESP8266 bzw ESP32 und man kann bei der Konfiguration der seriellen Schnittstelle diverse Probleme bekommen (Baudrate, Bitbreite, stop-bits, parity usw). Je nachdem welcher USB Bridge Controller bei dir verwendet wird, wird nur eine 2 Draht Leitung emuliert. Dann hat man nur XON/XOFF zur Synchronisation und bei zu hoher Baudrate gibt es abhängig von der Qualität/Schirmung des USB-Kabels intermittierende Probleme (z.B. Übersprechen, Err71). Es muss aber nicht am USB Kabel sondern kann auch an den USB Link Bausteinen (z.B. CH341) des Wemos liegen (in China sind nicht immer alle Bausteine der höchten Qualität verbaut).

Shor-ty

(Themenstarter)

Anmeldungsdatum:
10. September 2010

Beiträge: 714
Zitieren
20. April 2022 00:06 (zuletzt bearbeitet: 20. April 2022 00:07)

Hey shiro,

danke für Deine zügige Antwort.

- Verwende Arduino IDE 1.8.19 - Installiert durch apt get install (sollte ich mal kompilieren?) - dmesg hatte ich auszugsweise ja schon mal reingestellt, anbei noch das Gesamte

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
dmesg 
[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12
[    0.000000] Linux version 5.4.0-107-generic (buildd@lcy02-amd64-058) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #121-Ubuntu SMP Thu Mar 24 16:04:27 UTC 2022 (Ubuntu 5.4.0-107.121-generic 5.4.174)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-107-generic root=UUID=95ad269f-769a-475e-b08b-46d7bfd4d907 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f98bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f98c000-0x000000009fe6cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009fe6d000-0x00000000a2a94fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a2a95000-0x00000000a2af5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a2af6000-0x00000000a3015fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a3016000-0x00000000a4457fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a4458000-0x00000000a4ffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a4ffe000-0x00000000a4ffefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000256ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x9e667018-0x9e677057] usable ==> usable
[    0.000000] e820: update [mem 0x9e667018-0x9e677057] usable ==> usable
[    0.000000] e820: update [mem 0x9e65a018-0x9e666857] usable ==> usable
[    0.000000] e820: update [mem 0x9e65a018-0x9e666857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009e65a017] usable
[    0.000000] reserve setup_data: [mem 0x000000009e65a018-0x000000009e666857] usable
[    0.000000] reserve setup_data: [mem 0x000000009e666858-0x000000009e667017] usable
[    0.000000] reserve setup_data: [mem 0x000000009e667018-0x000000009e677057] usable
[    0.000000] reserve setup_data: [mem 0x000000009e677058-0x000000009f98bfff] usable
[    0.000000] reserve setup_data: [mem 0x000000009f98c000-0x000000009fe6cfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009fe6d000-0x00000000a2a94fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000a2a95000-0x00000000a2af5fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000a2af6000-0x00000000a3015fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000a3016000-0x00000000a4457fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000a4458000-0x00000000a4ffdfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000a4ffe000-0x00000000a4ffefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000256ffffff] usable
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0xa4e24d18  ACPI=0xa375c000  ACPI 2.0=0xa375c000  SMBIOS=0xf05b0  SMBIOS 3.0=0xa47c0000  MPS=0xfd780  MOKvar=0xa0ea1000  TPMEventLog=0x9fe79018 
[    0.000000] TPM Final Events table not present
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X540LA/X540LA, BIOS X540LA.204 03/14/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.352 MHz processor
[    0.002781] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002783] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002791] last_pfn = 0x257000 max_arch_pfn = 0x400000000
[    0.002797] MTRR default type: uncachable
[    0.002798] MTRR fixed ranges enabled:
[    0.002800]   00000-9FFFF write-back
[    0.002800]   A0000-BFFFF uncachable
[    0.002801]   C0000-FFFFF write-protect
[    0.002802] MTRR variable ranges enabled:
[    0.002804]   0 base 0000000000 mask 7F80000000 write-back
[    0.002805]   1 base 0080000000 mask 7FE0000000 write-back
[    0.002806]   2 base 00A0000000 mask 7FFC000000 write-back
[    0.002807]   3 base 00A4000000 mask 7FFF000000 write-back
[    0.002808]   4 base 0100000000 mask 7F00000000 write-back
[    0.002809]   5 base 0200000000 mask 7FC0000000 write-back
[    0.002809]   6 base 0240000000 mask 7FF0000000 write-back
[    0.002810]   7 base 0250000000 mask 7FFC000000 write-back
[    0.002811]   8 base 0254000000 mask 7FFE000000 write-back
[    0.002812]   9 base 0256000000 mask 7FFF000000 write-back
[    0.003172] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003325] e820: update [mem 0xa5000000-0xffffffff] usable ==> reserved
[    0.003329] last_pfn = 0xa4fff max_arch_pfn = 0x400000000
[    0.013372] found SMP MP-table at [mem 0x000fd980-0x000fd98f]
[    0.013386] esrt: Reserving ESRT space from 0x00000000a4e24d18 to 0x00000000a4e24d50.
[    0.013393] e820: update [mem 0xa0ea1000-0xa0ea1fff] usable ==> reserved
[    0.013411] check: Scanning 1 areas for low memory corruption
[    0.013415] Using GB pages for direct mapping
[    0.014122] secureboot: Secure boot disabled
[    0.014123] RAMDISK: [mem 0x3ce56000-0x3fffdfff]
[    0.014129] ACPI: Early table checksum verification disabled
[    0.014133] ACPI: RSDP 0x00000000A375C000 000024 (v02 _ASUS_)
[    0.014137] ACPI: XSDT 0x00000000A375C0B0 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.014142] ACPI: FACP 0x00000000A3777B80 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.014148] ACPI: DSDT 0x00000000A375C218 01B968 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.014152] ACPI: FACS 0x00000000A4455F80 000040
[    0.014155] ACPI: APIC 0x00000000A3777C90 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.014158] ACPI: FPDT 0x00000000A3777D18 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.014161] ACPI: FIDT 0x00000000A3777D60 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.014164] ACPI: ECDT 0x00000000A3777E00 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000006)
[    0.014167] ACPI: MCFG 0x00000000A3777EC8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.014170] ACPI: HPET 0x00000000A3777F08 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
[    0.014173] ACPI: SSDT 0x00000000A3777F40 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.014176] ACPI: UEFI 0x00000000A3778258 000042 (v01                 00000000      00000000)
[    0.014179] ACPI: SSDT 0x00000000A37782A0 000194 (v01 Intel  zpodd    00001000 INTL 20120913)
[    0.014183] ACPI: LPIT 0x00000000A3778438 000094 (v01                 00000000      00000000)
[    0.014186] ACPI: ASF! 0x00000000A37784D0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.014189] ACPI: SSDT 0x00000000A3778570 000539 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.014192] ACPI: SSDT 0x00000000A3778AB0 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.014196] ACPI: SSDT 0x00000000A3779628 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.014199] ACPI: SSDT 0x00000000A377C870 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[    0.014202] ACPI: PCCT 0x00000000A377CC08 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[    0.014205] ACPI: SSDT 0x00000000A377CC78 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[    0.014208] ACPI: SSDT 0x00000000A377D740 006BDB (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.014211] ACPI: DMAR 0x00000000A3784320 0000A8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.014214] ACPI: BGRT 0x00000000A37843C8 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.014217] ACPI: TPM2 0x00000000A3784400 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.014221] ACPI: Reserving FACP table memory at [mem 0xa3777b80-0xa3777c8b]
[    0.014222] ACPI: Reserving DSDT table memory at [mem 0xa375c218-0xa3777b7f]
[    0.014223] ACPI: Reserving FACS table memory at [mem 0xa4455f80-0xa4455fbf]
[    0.014224] ACPI: Reserving APIC table memory at [mem 0xa3777c90-0xa3777d13]
[    0.014225] ACPI: Reserving FPDT table memory at [mem 0xa3777d18-0xa3777d5b]
[    0.014225] ACPI: Reserving FIDT table memory at [mem 0xa3777d60-0xa3777dfb]
[    0.014226] ACPI: Reserving ECDT table memory at [mem 0xa3777e00-0xa3777ec0]
[    0.014227] ACPI: Reserving MCFG table memory at [mem 0xa3777ec8-0xa3777f03]
[    0.014228] ACPI: Reserving HPET table memory at [mem 0xa3777f08-0xa3777f3f]
[    0.014229] ACPI: Reserving SSDT table memory at [mem 0xa3777f40-0xa3778254]
[    0.014230] ACPI: Reserving UEFI table memory at [mem 0xa3778258-0xa3778299]
[    0.014231] ACPI: Reserving SSDT table memory at [mem 0xa37782a0-0xa3778433]
[    0.014232] ACPI: Reserving LPIT table memory at [mem 0xa3778438-0xa37784cb]
[    0.014233] ACPI: Reserving ASF! table memory at [mem 0xa37784d0-0xa377856f]
[    0.014234] ACPI: Reserving SSDT table memory at [mem 0xa3778570-0xa3778aa8]
[    0.014235] ACPI: Reserving SSDT table memory at [mem 0xa3778ab0-0xa3779623]
[    0.014236] ACPI: Reserving SSDT table memory at [mem 0xa3779628-0xa377c86c]
[    0.014237] ACPI: Reserving SSDT table memory at [mem 0xa377c870-0xa377cc03]
[    0.014238] ACPI: Reserving PCCT table memory at [mem 0xa377cc08-0xa377cc75]
[    0.014238] ACPI: Reserving SSDT table memory at [mem 0xa377cc78-0xa377d73b]
[    0.014239] ACPI: Reserving SSDT table memory at [mem 0xa377d740-0xa378431a]
[    0.014240] ACPI: Reserving DMAR table memory at [mem 0xa3784320-0xa37843c7]
[    0.014241] ACPI: Reserving BGRT table memory at [mem 0xa37843c8-0xa37843ff]
[    0.014242] ACPI: Reserving TPM2 table memory at [mem 0xa3784400-0xa3784433]
[    0.014253] ACPI: Local APIC address 0xfee00000
[    0.014349] No NUMA configuration found
[    0.014350] Faking a node at [mem 0x0000000000000000-0x0000000256ffffff]
[    0.014363] NODE_DATA(0) allocated [mem 0x256fd3000-0x256ffdfff]
[    0.014619] Zone ranges:
[    0.014619]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014621]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.014622]   Normal   [mem 0x0000000100000000-0x0000000256ffffff]
[    0.014623]   Device   empty
[    0.014624] Movable zone start for each node
[    0.014628] Early memory node ranges
[    0.014629]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.014630]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.014631]   node   0: [mem 0x0000000000100000-0x000000009f98bfff]
[    0.014632]   node   0: [mem 0x000000009fe6d000-0x00000000a2a94fff]
[    0.014633]   node   0: [mem 0x00000000a2af6000-0x00000000a3015fff]
[    0.014633]   node   0: [mem 0x00000000a4ffe000-0x00000000a4ffefff]
[    0.014634]   node   0: [mem 0x0000000100000000-0x0000000256ffffff]
[    0.015000] Zeroed struct page in unavailable ranges: 25998 pages
[    0.015002] Initmem setup node 0 [mem 0x0000000000001000-0x0000000256ffffff]
[    0.015003] On node 0 totalpages: 2071154
[    0.015004]   DMA zone: 64 pages used for memmap
[    0.015005]   DMA zone: 26 pages reserved
[    0.015006]   DMA zone: 3997 pages, LIFO batch:0
[    0.015067]   DMA32 zone: 10348 pages used for memmap
[    0.015068]   DMA32 zone: 662229 pages, LIFO batch:63
[    0.027261]   Normal zone: 21952 pages used for memmap
[    0.027263]   Normal zone: 1404928 pages, LIFO batch:63
[    0.048156] Reserving Intel graphics memory at [mem 0xa6000000-0xa7ffffff]
[    0.048228] ACPI: PM-Timer IO Port: 0x1808
[    0.048230] ACPI: Local APIC address 0xfee00000
[    0.048238] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.048239] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.048240] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.048240] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.048253] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.048255] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.048257] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.048258] ACPI: IRQ0 used by override.
[    0.048259] ACPI: IRQ9 used by override.
[    0.048261] Using ACPI (MADT) for SMP configuration information
[    0.048263] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.048273] e820: update [mem 0xa143b000-0xa144efff] usable ==> reserved
[    0.048285] TSC deadline timer available
[    0.048286] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.048314] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.048316] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.048318] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.048319] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.048321] PM: Registered nosave memory: [mem 0x9e65a000-0x9e65afff]
[    0.048323] PM: Registered nosave memory: [mem 0x9e666000-0x9e666fff]
[    0.048324] PM: Registered nosave memory: [mem 0x9e667000-0x9e667fff]
[    0.048326] PM: Registered nosave memory: [mem 0x9e677000-0x9e677fff]
[    0.048328] PM: Registered nosave memory: [mem 0x9f98c000-0x9fe6cfff]
[    0.048330] PM: Registered nosave memory: [mem 0xa0ea1000-0xa0ea1fff]
[    0.048332] PM: Registered nosave memory: [mem 0xa143b000-0xa144efff]
[    0.048334] PM: Registered nosave memory: [mem 0xa2a95000-0xa2af5fff]
[    0.048336] PM: Registered nosave memory: [mem 0xa3016000-0xa4457fff]
[    0.048337] PM: Registered nosave memory: [mem 0xa4458000-0xa4ffdfff]
[    0.048339] PM: Registered nosave memory: [mem 0xa4fff000-0xa57fffff]
[    0.048340] PM: Registered nosave memory: [mem 0xa5800000-0xa7ffffff]
[    0.048340] PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff]
[    0.048341] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.048341] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.048342] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.048343] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.048343] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.048344] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.048345] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.048345] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.048346] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.048347] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.048347] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.048349] [mem 0xa8000000-0xf7ffffff] available for PCI devices
[    0.048350] Booting paravirtualized kernel on bare hardware
[    0.048354] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.048362] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.048692] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288
[    0.048701] pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152
[    0.048702] pcpu-alloc: [0] 0 1 2 3 
[    0.048740] Built 1 zonelists, mobility grouping on.  Total pages: 2038764
[    0.048740] Policy zone: Normal
[    0.048742] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-107-generic root=UUID=95ad269f-769a-475e-b08b-46d7bfd4d907 ro quiet splash vt.handoff=7
[    0.049588] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.049966] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.050025] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.056235] Calgary: detecting Calgary via BIOS EBDA area
[    0.056237] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.086535] Memory: 7928548K/8284616K available (14339K kernel code, 2401K rwdata, 9504K rodata, 2752K init, 4948K bss, 356068K reserved, 0K cma-reserved)
[    0.086543] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.086709] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.086726] Kernel/User page tables isolation: enabled
[    0.086742] ftrace: allocating 44660 entries in 175 pages
[    0.108326] rcu: Hierarchical RCU implementation.
[    0.108328] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.108329] 	Tasks RCU enabled.
[    0.108330] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.108331] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.112054] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[    0.112382] random: crng done (trusting CPU's manufacturer)
[    0.112404] vt handoff: transparent VT on vt#7
[    0.112411] Console: colour dummy device 80x25
[    0.112416] printk: console [tty0] enabled
[    0.112437] ACPI: Core revision 20190816
[    0.112644] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.112645] APIC: Switch to symmetric I/O mode setup
[    0.112647] DMAR: Host address width 39
[    0.112649] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.112655] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.112656] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.112660] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.112661] DMAR: RMRR base: 0x000000a2af4000 end: 0x000000a2af4fff
[    0.112662] DMAR: RMRR base: 0x000000a5800000 end: 0x000000a7ffffff
[    0.112664] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.112665] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.112665] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.112666] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.113321] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.113321] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.113804] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39860f04b45, max_idle_ns: 881590463687 ns
[    0.113808] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.70 BogoMIPS (lpj=7981408)
[    0.113811] pid_max: default: 32768 minimum: 301
[    0.116560] LSM: Security Framework initializing
[    0.116571] Yama: becoming mindful.
[    0.116605] AppArmor: AppArmor initialized
[    0.116664] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.116685] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.116702] *** VALIDATE tmpfs ***
[    0.116875] *** VALIDATE proc ***
[    0.116938] *** VALIDATE cgroup1 ***
[    0.116940] *** VALIDATE cgroup2 ***
[    0.117007] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.117020] process: using mwait in idle threads
[    0.117023] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.117024] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.117027] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.117029] Spectre V2 : Mitigation: Retpolines
[    0.117030] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.117030] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.117032] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.117032] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.117036] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.117040] SRBDS: Mitigation: Microcode
[    0.117041] MDS: Mitigation: Clear CPU buffers
[    0.117344] Freeing SMP alternatives memory: 40K
[    0.117805] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.117805] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.117805] ... version:                3
[    0.117805] ... bit width:              48
[    0.117805] ... generic registers:      4
[    0.117805] ... value mask:             0000ffffffffffff
[    0.117805] ... max period:             00007fffffffffff
[    0.117805] ... fixed-purpose events:   3
[    0.117805] ... event mask:             000000070000000f
[    0.117805] rcu: Hierarchical SRCU implementation.
[    0.117805] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.117805] smp: Bringing up secondary CPUs ...
[    0.117805] x86: Booting SMP configuration:
[    0.117805] .... node  #0, CPUs:      #1 #2
[    0.118334] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.118334]  #3
[    0.118431] smp: Brought up 1 node, 4 CPUs
[    0.118431] smpboot: Max logical packages: 1
[    0.118431] smpboot: Total of 4 processors activated (15962.81 BogoMIPS)
[    0.119713] devtmpfs: initialized
[    0.119713] x86/mm: Memory block size: 128MB
[    0.122539] PM: Registering ACPI NVS region [mem 0xa3016000-0xa4457fff] (21241856 bytes)
[    0.122539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.122539] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.122539] pinctrl core: initialized pinctrl subsystem
[    0.122539] PM: RTC time: 06:50:22, date: 2022-04-17
[    0.122539] NET: Registered protocol family 16
[    0.122539] audit: initializing netlink subsys (disabled)
[    0.122539] audit: type=2000 audit(1650178222.008:1): state=initialized audit_enabled=0 res=1
[    0.122539] EISA bus registered
[    0.122539] cpuidle: using governor ladder
[    0.122539] cpuidle: using governor menu
[    0.122539] Detected 1 PCC Subspaces
[    0.122539] Registering PCC driver as Mailbox controller
[    0.122539] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.122539] ACPI: bus type PCI registered
[    0.122539] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.122539] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122539] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.122539] PCI: Using configuration type 1 for base access
[    0.122539] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.125909] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.125909] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.125917] ACPI: Added _OSI(Module Device)
[    0.125918] ACPI: Added _OSI(Processor Device)
[    0.125919] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.125920] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125921] ACPI: Added _OSI(Linux-Dell-Video)
[    0.125922] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.125923] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.168357] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.170216] ACPI: EC: EC started
[    0.170217] ACPI: EC: interrupt blocked
[    0.172481] ACPI: \: Used as first EC
[    0.172483] ACPI: \: GPE=0xa, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.172483] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.178234] ACPI: Dynamic OEM Table Load:
[    0.178241] ACPI: SSDT 0xFFFF9B624CE50400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.180341] ACPI: Dynamic OEM Table Load:
[    0.180347] ACPI: SSDT 0xFFFF9B624D2F8000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.182533] ACPI: Dynamic OEM Table Load:
[    0.182537] ACPI: SSDT 0xFFFF9B624CE1E000 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.185684] ACPI: Interpreter enabled
[    0.185724] ACPI: (supports S0 S3 S4 S5)
[    0.185725] ACPI: Using IOAPIC for interrupt routing
[    0.185768] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.186580] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.191491] ACPI: Power Resource [PG00] (on)
[    0.192113] ACPI: Power Resource [PG01] (on)
[    0.192737] ACPI: Power Resource [PG02] (on)
[    0.193687] ACPI: Power Resource [WRST] (off)
[    0.194063] ACPI: Power Resource [WRST] (off)
[    0.194443] ACPI: Power Resource [WRST] (off)
[    0.194855] ACPI: Power Resource [WRST] (off)
[    0.195264] ACPI: Power Resource [WRST] (off)
[    0.195636] ACPI: Power Resource [WRST] (off)
[    0.196009] ACPI: Power Resource [WRST] (off)
[    0.196379] ACPI: Power Resource [WRST] (off)
[    0.210380] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.210389] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.211429] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.211430] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.212379] PCI host bridge to bus 0000:00
[    0.212381] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.212383] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.212384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.212385] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff window]
[    0.212386] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
[    0.212388] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.212400] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.212551] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.212564] pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit]
[    0.212571] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.212575] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.212592] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.212593] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[    0.212786] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.212797] pci 0000:00:03.0: reg 0x10: [mem 0xaa21c000-0xaa21ffff 64bit]
[    0.212974] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[    0.212987] pci 0000:00:04.0: reg 0x10: [mem 0xaa210000-0xaa217fff 64bit]
[    0.213168] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.213187] pci 0000:00:14.0: reg 0x10: [mem 0xaa200000-0xaa20ffff 64bit]
[    0.213248] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.213384] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.213404] pci 0000:00:16.0: reg 0x10: [mem 0xaa224000-0xaa22401f 64bit]
[    0.213467] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.213672] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.213692] pci 0000:00:1b.0: reg 0x10: [mem 0xaa218000-0xaa21bfff 64bit]
[    0.213753] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.213945] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.214027] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.214272] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.214357] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.214600] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.214684] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.214933] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100
[    0.215185] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.215200] pci 0000:00:1f.2: reg 0x10: [io  0x50b0-0x50b7]
[    0.215207] pci 0000:00:1f.2: reg 0x14: [io  0x50a0-0x50a3]
[    0.215214] pci 0000:00:1f.2: reg 0x18: [io  0x5090-0x5097]
[    0.215220] pci 0000:00:1f.2: reg 0x1c: [io  0x5080-0x5083]
[    0.215227] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.215233] pci 0000:00:1f.2: reg 0x24: [mem 0xaa222000-0xaa2227ff]
[    0.215271] pci 0000:00:1f.2: PME# supported from D3hot
[    0.215404] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.215421] pci 0000:00:1f.3: reg 0x10: [mem 0xaa221000-0xaa2210ff 64bit]
[    0.215440] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.215594] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.215627] pci 0000:00:1f.6: reg 0x10: [mem 0xaa220000-0xaa220fff 64bit]
[    0.215961] acpiphp: Slot [1] registered
[    0.215966] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.216055] pci 0000:02:00.0: [10ec:5286] type 00 class 0xff0000
[    0.216084] pci 0000:02:00.0: reg 0x10: [mem 0xaa100000-0xaa10ffff]
[    0.216238] pci 0000:02:00.0: supports D1 D2
[    0.216239] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.216425] pci 0000:02:00.2: [10ec:8136] type 00 class 0x020000
[    0.216453] pci 0000:02:00.2: reg 0x10: [io  0x4000-0x40ff]
[    0.216481] pci 0000:02:00.2: reg 0x18: [mem 0xaa110000-0xaa110fff 64bit]
[    0.216498] pci 0000:02:00.2: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref]
[    0.216593] pci 0000:02:00.2: supports D1 D2
[    0.216594] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.216731] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.216734] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.216736] pci 0000:00:1c.2:   bridge window [mem 0xaa100000-0xaa1fffff]
[    0.216741] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[    0.216843] pci 0000:03:00.0: [10ec:b723] type 00 class 0x028000
[    0.216894] pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.216939] pci 0000:03:00.0: reg 0x18: [mem 0xaa000000-0xaa003fff 64bit]
[    0.217131] pci 0000:03:00.0: supports D1 D2
[    0.217132] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.217387] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.217390] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.217393] pci 0000:00:1c.3:   bridge window [mem 0xaa000000-0xaa0fffff]
[    0.219852] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.219936] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.220018] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.220099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.220179] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.220259] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.220340] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.220420] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.222463] ACPI: EC: interrupt unblocked
[    0.222464] ACPI: EC: event unblocked
[    0.222472] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.222473] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.222566] iommu: Default domain type: Translated 
[    0.222566] SCSI subsystem initialized
[    0.222566] libata version 3.00 loaded.
[    0.222566] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.222566] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.222566] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.222566] vgaarb: loaded
[    0.222566] ACPI: bus type USB registered
[    0.222566] usbcore: registered new interface driver usbfs
[    0.222566] usbcore: registered new interface driver hub
[    0.222566] usbcore: registered new device driver usb
[    0.274717] pps_core: LinuxPPS API ver. 1 registered
[    0.274718] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.274720] PTP clock support registered
[    0.274736] EDAC MC: Ver: 3.0.0
[    0.274736] Registered efivars operations
[    0.274736] PCI: Using ACPI for IRQ routing
[    0.277929] PCI: pci_cache_line_size set to 64 bytes
[    0.277975] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.277977] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.277978] e820: reserve RAM buffer [mem 0x9e65a018-0x9fffffff]
[    0.277979] e820: reserve RAM buffer [mem 0x9e667018-0x9fffffff]
[    0.277980] e820: reserve RAM buffer [mem 0x9f98c000-0x9fffffff]
[    0.277981] e820: reserve RAM buffer [mem 0xa0ea1000-0xa3ffffff]
[    0.277982] e820: reserve RAM buffer [mem 0xa143b000-0xa3ffffff]
[    0.277983] e820: reserve RAM buffer [mem 0xa2a95000-0xa3ffffff]
[    0.277984] e820: reserve RAM buffer [mem 0xa3016000-0xa3ffffff]
[    0.277985] e820: reserve RAM buffer [mem 0xa4fff000-0xa7ffffff]
[    0.277986] e820: reserve RAM buffer [mem 0x257000000-0x257ffffff]
[    0.278097] NetLabel: Initializing
[    0.278098] NetLabel:  domain hash size = 128
[    0.278098] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.278119] NetLabel:  unlabeled traffic allowed by default
[    0.278891] clocksource: Switched to clocksource tsc-early
[    0.292724] *** VALIDATE bpf ***
[    0.292794] VFS: Disk quotas dquot_6.6.0
[    0.292812] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.292842] *** VALIDATE ramfs ***
[    0.292846] *** VALIDATE hugetlbfs ***
[    0.292945] AppArmor: AppArmor Filesystem Enabled
[    0.292979] pnp: PnP ACPI init
[    0.293293] system 00:00: [io  0x0240-0x0259] has been reserved
[    0.293299] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293369] pnp 00:01: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.293511] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.293513] system 00:02: [io  0xffff] has been reserved
[    0.293514] system 00:02: [io  0xffff] has been reserved
[    0.293516] system 00:02: [io  0xffff] has been reserved
[    0.293517] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.293519] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.293523] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293587] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.293642] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.293645] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.293903] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.293905] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.293906] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.293908] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.293909] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.293910] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.293912] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.293914] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.293915] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.293917] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.293918] system 00:05: [mem 0xa8010000-0xa801ffff] has been reserved
[    0.293920] system 00:05: [mem 0xa8000000-0xa800ffff] has been reserved
[    0.293923] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294881] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.294883] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.294886] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295949] pnp: PnP ACPI: found 7 devices
[    0.297414] thermal_sys: Registered thermal governor 'fair_share'
[    0.297415] thermal_sys: Registered thermal governor 'bang_bang'
[    0.297416] thermal_sys: Registered thermal governor 'step_wise'
[    0.297417] thermal_sys: Registered thermal governor 'user_space'
[    0.297417] thermal_sys: Registered thermal governor 'power_allocator'
[    0.301905] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.301945] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.301956] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.301958] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.301962] pci 0000:00:1c.2:   bridge window [mem 0xaa100000-0xaa1fffff]
[    0.301965] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[    0.301970] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.301972] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.301975] pci 0000:00:1c.3:   bridge window [mem 0xaa000000-0xaa0fffff]
[    0.301983] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.301984] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.301986] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.301987] pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff window]
[    0.301988] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window]
[    0.301990] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.301991] pci_bus 0000:02: resource 1 [mem 0xaa100000-0xaa1fffff]
[    0.301992] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[    0.301993] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.301995] pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaa0fffff]
[    0.302204] NET: Registered protocol family 2
[    0.302342] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.303646] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.303713] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.303910] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.304063] TCP: Hash tables configured (established 65536 bind 65536)
[    0.304109] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.304142] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.304194] NET: Registered protocol family 1
[    0.304199] NET: Registered protocol family 44
[    0.304210] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.304531] PCI: CLS 0 bytes, default 64
[    0.304580] Trying to unpack rootfs image as initramfs...
[    0.462404] Freeing initrd memory: 50848K
[    0.477839] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.477841] software IO TLB: mapped [mem 0x9a65a000-0x9e65a000] (64MB)
[    0.478079] check: Scanning for low memory corruption every 60 seconds
[    0.478547] Initialise system trusted keyrings
[    0.478557] Key type blacklist registered
[    0.478588] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.480097] zbud: loaded
[    0.480509] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.480683] fuse: init (API version 7.31)
[    0.480701] *** VALIDATE fuse ***
[    0.480703] *** VALIDATE fuse ***
[    0.480806] Platform Keyring initialized
[    0.485644] Key type asymmetric registered
[    0.485644] Asymmetric key parser 'x509' registered
[    0.485652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.485687] io scheduler mq-deadline registered
[    0.486086] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[    0.486331] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[    0.486544] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[    0.486615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.486680] efifb: probing for efifb
[    0.486704] efifb: showing boot graphics
[    0.487149] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[    0.487150] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.487151] efifb: scrolling: redraw
[    0.487152] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.487196] fbcon: Deferring console take-over
[    0.487197] fb0: EFI VGA frame buffer device
[    0.487205] intel_idle: MWAIT substates: 0x11142120
[    0.487206] intel_idle: v0.4.1 model 0x3D
[    0.487456] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.487720] ACPI: AC Adapter [AC0] (off-line)
[    0.487811] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.487829] ACPI: Lid Switch [LID]
[    0.487862] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.487896] ACPI: Sleep Button [SLPB]
[    0.487928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.487953] ACPI: Power Button [PWRF]
[    0.489440] thermal LNXTHERM:00: registered as thermal_zone0
[    0.489442] ACPI: Thermal Zone [THRM] (37 C)
[    0.489680] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.493319] hpet_acpi_add: no address or irqs in _CRS
[    0.493389] Linux agpgart interface v0.103
[    0.496516] tpm_crb MSFT0101:00: can't request region for resource [mem 0xa4fff000-0xa4fff02f]
[    0.496523] tpm_crb: probe of MSFT0101:00 failed with error -16
[    0.499344] battery: ACPI: Battery Slot [BAT0] (battery present)
[    0.637908] loop: module loaded
[    0.638179] tun: Universal TUN/TAP device driver, 1.6
[    0.638213] PPP generic driver version 2.4.2
[    0.638271] VFIO - User Level meta-driver version: 0.3
[    0.638393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.638399] ehci-pci: EHCI PCI platform driver
[    0.638411] ehci-platform: EHCI generic platform driver
[    0.638424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.638426] ohci-pci: OHCI PCI platform driver
[    0.638434] ohci-platform: OHCI generic platform driver
[    0.638447] uhci_hcd: USB Universal Host Controller Interface driver
[    0.638686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.638691] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.639737] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    0.639741] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.639901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.639903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.639904] usb usb1: Product: xHCI Host Controller
[    0.639905] usb usb1: Manufacturer: Linux 5.4.0-107-generic xhci-hcd
[    0.639906] usb usb1: SerialNumber: 0000:00:14.0
[    0.640062] hub 1-0:1.0: USB hub found
[    0.640074] hub 1-0:1.0: 11 ports detected
[    0.644373] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.644376] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.644379] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.644414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.644416] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.644417] usb usb2: Product: xHCI Host Controller
[    0.644418] usb usb2: Manufacturer: Linux 5.4.0-107-generic xhci-hcd
[    0.644419] usb usb2: SerialNumber: 0000:00:14.0
[    0.644520] hub 2-0:1.0: USB hub found
[    0.644530] hub 2-0:1.0: 4 ports detected
[    0.645070] usb: port power management may be unreliable
[    0.645611] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    0.645612] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.646510] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.646600] mousedev: PS/2 mouse device common for all mice
[    0.646743] rtc_cmos 00:03: RTC can wake from S4
[    0.646922] rtc_cmos 00:03: registered as rtc0
[    0.646941] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[    0.646948] i2c /dev entries driver
[    0.647039] device-mapper: uevent: version 1.0.3
[    0.647092] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    0.647112] platform eisa.0: Probing EISA bus 0
[    0.647113] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.647114] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.647116] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.647116] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.647117] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.647118] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.647119] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.647120] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.647121] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.647123] platform eisa.0: EISA: Detected 0 cards
[    0.647130] intel_pstate: Intel P-state driver initializing
[    0.647291] ledtrig-cpu: registered to indicate activity on CPUs
[    0.647294] EFI Variables Facility v0.08 2004-May-17
[    0.650064] drop_monitor: Initializing network drop monitor service
[    0.650264] NET: Registered protocol family 10
[    0.657715] Segment Routing with IPv6
[    0.657747] NET: Registered protocol family 17
[    0.657789] Key type dns_resolver registered
[    0.658107] RAS: Correctable Errors collector initialized.
[    0.658149] microcode: sig=0x306d4, pf=0x40, revision=0x2f
[    0.658223] microcode: Microcode Update Driver: v2.2.
[    0.658228] IPI shorthand broadcast: enabled
[    0.658236] sched_clock: Marking stable (656659919, 1558212)->(667167688, -8949557)
[    0.658343] registered taskstats version 1
[    0.658352] Loading compiled-in X.509 certificates
[    0.659335] Loaded X.509 cert 'Build time autogenerated kernel key: 713aaee4a1951813e84c4ce74b91269786d86c89'
[    0.660180] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.661017] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.661018] blacklist: Loading compiled-in revocation X.509 certificates
[    0.661040] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.661074] zswap: loaded using pool lzo/zbud
[    0.661173] Key type ._fscrypt registered
[    0.661174] Key type .fscrypt registered
[    0.668695] Key type big_key registered
[    0.672227] Key type encrypted registered
[    0.672231] AppArmor: AppArmor sha1 policy hashing enabled
[    0.672864] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.673228] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.673231] ima: No TPM chip found, activating TPM-bypass!
[    0.673238] ima: Allocated hash algorithm: sha1
[    0.673243] ima: No architecture policies found
[    0.673253] evm: Initialising EVM extended attributes:
[    0.673254] evm: security.selinux
[    0.673254] evm: security.SMACK64
[    0.673255] evm: security.SMACK64EXEC
[    0.673255] evm: security.SMACK64TRANSMUTE
[    0.673256] evm: security.SMACK64MMAP
[    0.673256] evm: security.apparmor
[    0.673257] evm: security.ima
[    0.673257] evm: security.capability
[    0.673258] evm: HMAC attrs: 0x1
[    0.674378] PM:   Magic number: 2:686:822
[    0.674505] rtc_cmos 00:03: setting system clock to 2022-04-17T06:50:23 UTC (1650178223)
[    0.675821] Freeing unused decrypted memory: 2040K
[    0.676379] Freeing unused kernel image memory: 2752K
[    0.685918] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.701880] Write protecting the kernel read-only data: 26624k
[    0.702436] Freeing unused kernel image memory: 2008K
[    0.702601] Freeing unused kernel image memory: 736K
[    0.715357] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.715359] x86/mm: Checking user space page tables
[    0.727775] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.727777] Run /init as init process
[    0.847851] hidraw: raw HID events driver (C) Jiri Kosina
[    0.850681] i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vdd not found, using dummy regulator
[    0.850702] i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vddl not found, using dummy regulator
[    0.901834] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    0.908020] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    0.908051] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.910854] r8169 0000:02:00.2: can't disable ASPM; OS doesn't have ASPM control
[    0.912684] ahci 0000:00:1f.2: version 3.0
[    0.916770] r8169 0000:02:00.2 eth0: RTL8402, 2c:fd:a1:b0:5c:c6, XID 440, IRQ 47
[    0.923023] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.923026] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.923578] scsi host0: ahci
[    0.925940] scsi host1: ahci
[    0.926013] ata1: SATA max UDMA/133 abar m2048@0xaa222000 port 0xaa222100 irq 48
[    0.926015] ata2: SATA max UDMA/133 abar m2048@0xaa222000 port 0xaa222180 irq 48
[    0.951576] r8169 0000:02:00.2 enp2s0f2: renamed from eth0
[    1.055279] usb 1-4: New USB device found, idVendor=0bda, idProduct=b721, bcdDevice= 2.00
[    1.055281] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.055283] usb 1-4: Product: Bluetooth Radio 
[    1.055284] usb 1-4: Manufacturer: Realtek 
[    1.055285] usb 1-4: SerialNumber: 00e04c000001
[    1.181875] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.241065] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.241081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.242415] ata1.00: ATA-10: Micron_1100_MTFDDAK256TBN,  M0MA020, max UDMA/133
[    1.242418] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.243593] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE1N, AS00, max UDMA/133
[    1.244935] ata1.00: configured for UDMA/133
[    1.248066] ata2.00: configured for UDMA/133
[    1.255044] ahci 0000:00:1f.2: port does not support device sleep
[    1.255377] scsi 0:0:0:0: Direct-Access     ATA      Micron_1100_MTFD A020 PQ: 0 ANSI: 5
[    1.255774] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.255849] ata1.00: Enabling discard_zeroes_data
[    1.255982] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.255998] sd 0:0:0:0: [sda] Write Protect is off
[    1.256000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.256059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.257539] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUE1N     AS00 PQ: 0 ANSI: 5
[    1.270045] ata1.00: Enabling discard_zeroes_data
[    1.271723]  sda: sda1 sda2
[    1.285961] ata1.00: Enabling discard_zeroes_data
[    1.286499] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.317662] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.317664] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.349913] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.350060] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.355568] usb 1-5: New USB device found, idVendor=04f2, idProduct=b52b, bcdDevice=95.52
[    1.355570] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.355572] usb 1-5: Product: USB2.0 VGA UVC WebCam
[    1.355573] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.355574] usb 1-5: SerialNumber: 0x0001
[    1.485862] tsc: Refined TSC clocksource calibration: 1995.381 MHz
[    1.485871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398645f40a8, max_idle_ns: 881590586805 ns
[    1.485887] clocksource: Switched to clocksource tsc
[    1.700292] fbcon: Taking over console
[    1.700376] Console: switching to colour frame buffer device 128x48
[    1.708738] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.876387] systemd[1]: Inserted module 'autofs4'
[    1.899230] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.917964] systemd[1]: Detected architecture x86-64.
[    1.934506] systemd[1]: Set hostname to <cfd>.
[    2.122872] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid \xe2\x86\x92 /run/anydesk.pid; please update the unit file accordingly.
[    2.154933] systemd[1]: Created slice system-modprobe.slice.
[    2.155226] systemd[1]: Created slice system-postfix.slice.
[    2.155496] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.155816] systemd[1]: Created slice User and Session Slice.
[    2.155898] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.156236] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.156298] systemd[1]: Reached target User and Group Name Lookups.
[    2.156314] systemd[1]: Reached target Remote File Systems.
[    2.156327] systemd[1]: Reached target Slices.
[    2.156485] systemd[1]: Listening on Syslog Socket.
[    2.156587] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.156653] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.156873] systemd[1]: Listening on Journal Audit Socket.
[    2.156964] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.157077] systemd[1]: Listening on Journal Socket.
[    2.157194] systemd[1]: Listening on udev Control Socket.
[    2.157264] systemd[1]: Listening on udev Kernel Socket.
[    2.158306] systemd[1]: Mounting Huge Pages File System...
[    2.159448] systemd[1]: Mounting POSIX Message Queue File System...
[    2.160852] systemd[1]: Mounting Kernel Debug File System...
[    2.162638] systemd[1]: Mounting Kernel Trace File System...
[    2.165262] systemd[1]: Starting Journal Service...
[    2.167917] systemd[1]: Starting Set the console keyboard layout...
[    2.169692] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.171465] systemd[1]: Starting Load Kernel Module drm...
[    2.173887] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.175052] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.177619] systemd[1]: Starting Load Kernel Modules...
[    2.179419] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.186010] systemd[1]: Starting udev Coldplug all Devices...
[    2.188155] systemd[1]: Starting Uncomplicated firewall...
[    2.189866] systemd[1]: Started Read required files in advance.
[    2.193155] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    2.199140] systemd[1]: Mounted Huge Pages File System.
[    2.199390] systemd[1]: Mounted POSIX Message Queue File System.
[    2.199601] systemd[1]: Mounted Kernel Debug File System.
[    2.199809] systemd[1]: Mounted Kernel Trace File System.
[    2.200619] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.201497] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.202403] systemd[1]: Finished Uncomplicated firewall.
[    2.203959] systemd[1]: Activating swap /swapfile...
[    2.205531] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.205644] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.210176] systemd[1]: Starting Load/Save Random Seed...
[    2.212140] systemd[1]: Starting Create System Users...
[    2.212982] systemd[1]: modprobe@drm.service: Succeeded.
[    2.214552] systemd[1]: Finished Load Kernel Module drm.
[    2.237215] systemd[1]: Finished Load/Save Random Seed.
[    2.244119] systemd[1]: Finished Create System Users.
[    2.245910] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.250170] lp: driver loaded but no devices found
[    2.276554] ppdev: user-space parallel port driver
[    2.344621] systemd[1]: Started Journal Service.
[    2.368153] systemd-journald[265]: Received client request to flush runtime journal.
[    2.376336] IPMI message handler: version 39.2
[    2.379354] ipmi device interface
[    2.414059] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    3.117493] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input4
[    3.206050] elan_i2c i2c-ELAN1000:00: i2c-ELAN1000:00 supply vcc not found, using dummy regulator
[    3.379946] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    3.452417] asus_wmi: ASUS WMI generic driver loaded
[    3.497420] asus_wmi: Initialization: 0x1
[    3.497535] asus_wmi: BIOS WMI version: 7.9
[    3.497660] asus_wmi: SFUN value: 0xa0077
[    3.497665] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    3.497668] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    3.498495] mc: Linux media interface: v0.10
[    3.505301] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[    3.515015] videodev: Linux video capture interface: v2.00
[    3.518526] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.518930] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.542761] Bluetooth: Core ver 2.22
[    3.542790] NET: Registered protocol family 31
[    3.542792] Bluetooth: HCI device and connection manager initialized
[    3.542797] Bluetooth: HCI socket layer initialized
[    3.542799] Bluetooth: L2CAP socket layer initialized
[    3.542804] Bluetooth: SCO socket layer initialized
[    3.545218] elan_i2c i2c-ELAN1000:00: Elan Touchpad: Module ID: 0x0005, Firmware: 0x0004, Sample: 0x000d, IAP: 0x000e
[    3.549870] input: Elan Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-ELAN1000:00/input/input6
[    3.605848] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.605850] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.605851] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.605852] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.605853] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.616931] cryptd: max_cpu_qlen set to 1000
[    3.620177] usbcore: registered new interface driver btusb
[    3.624627] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b52b)
[    3.632870] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[    3.634511] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    3.634513] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[    3.636513] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[    3.636552] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[    3.636567] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[    3.636656] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input7
[    3.637235] AVX2 version of gcm_enc/dec engaged.
[    3.637237] AES CTR mode by8 optimization enabled
[    3.642367] usbcore: registered new interface driver uvcvideo
[    3.642369] USB Video Class driver (1.1.1)
[    3.765644] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    3.765646] fb0: switching to inteldrmfb from EFI VGA
[    3.766043] Console: switching to colour dummy device 80x25
[    3.766106] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.772118] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.772120] [drm] Driver supports precise vblank timestamp query.
[    3.773990] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.837252] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    3.841862] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.902965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    3.903232] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.906882] fbcon: i915drmfb (fb0) is primary device
[    3.907036] Console: switching to colour frame buffer device 240x67
[    3.907093] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.941570] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    3.941667] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    3.941754] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    3.941859] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    3.942323] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    3.987092] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.987096] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.987099] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.987102] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.987103] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.987107] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x1b
[    3.987109] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[    3.987221] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[    3.997838] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    3.998425] rtlwifi: rtlwifi: wireless switch is on
[    4.037683] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    4.439509] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[    4.525213] intel_rapl_common: Found RAPL domain package
[    4.525216] intel_rapl_common: Found RAPL domain core
[    4.525218] intel_rapl_common: Found RAPL domain uncore
[    4.525219] intel_rapl_common: Found RAPL domain dram
[    4.525224] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    4.525231] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[    4.741390] rtl8723be 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.413863] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[    6.014869] audit: type=1400 audit(1650178228.835:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=748 comm="apparmor_parser"
[    6.015507] audit: type=1400 audit(1650178228.835:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=747 comm="apparmor_parser"
[    6.046370] audit: type=1400 audit(1650178228.867:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=754 comm="apparmor_parser"
[    6.050669] audit: type=1400 audit(1650178228.871:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=753 comm="apparmor_parser"
[    6.062324] audit: type=1400 audit(1650178228.883:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=755 comm="apparmor_parser"
[    6.063697] audit: type=1400 audit(1650178228.883:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=756 comm="apparmor_parser"
[    6.063703] audit: type=1400 audit(1650178228.883:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=756 comm="apparmor_parser"
[    6.063706] audit: type=1400 audit(1650178228.883:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=756 comm="apparmor_parser"
[    6.077940] audit: type=1400 audit(1650178228.899:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=757 comm="apparmor_parser"
[    6.135773] audit: type=1400 audit(1650178228.955:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=760 comm="apparmor_parser"
[    8.983034] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.983036] Bluetooth: BNEP filters: protocol multicast
[    8.983041] Bluetooth: BNEP socket layer initialized
[    9.007625] powercap intel-rapl:0: package locked by BIOS, monitoring only
[    9.046928] NET: Registered protocol family 38
[   10.067098] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[   10.218800] r8169 0000:02:00.2 enp2s0f2: Link is Down
[   11.028769] kauditd_printk_skb: 35 callbacks suppressed
[   11.028772] audit: type=1400 audit(1650178233.847:47): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=946 comm="cups-browsed" capability=23  capname="sys_nice"
[   12.570577] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[   12.580738] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[   12.581955] wlp3s0: authenticated
[   12.585867] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[   12.588119] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[   12.588359] wlp3s0: associated
[   12.641532] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   22.710059] rfkill: input handler disabled
[   27.461615] Bluetooth: RFCOMM TTY layer initialized
[   27.461622] Bluetooth: RFCOMM socket layer initialized
[   27.461629] Bluetooth: RFCOMM ver 1.11
[   27.542690] rfkill: input handler enabled
[   32.371270] rfkill: input handler disabled
[   35.174240] audit: type=1400 audit(1650178257.995:48): apparmor="DENIED" operation="ptrace" profile="/usr/share/hplip/systray.py" pid=2433 comm="hp-systray" requested_mask="read" denied_mask="read" peer="unconfined"
[  380.313818] rtlwifi: AP off, try to reconnect now
[  380.313873] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[  381.474437] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[  381.494875] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[  381.496161] wlp3s0: authenticated
[  381.499541] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[  381.501666] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[  381.501956] wlp3s0: associated
[ 2477.107464] perf: interrupt took too long (2677 > 2500), lowering kernel.perf_event_max_sample_rate to 74500
[ 3164.572841] perf: interrupt took too long (3347 > 3346), lowering kernel.perf_event_max_sample_rate to 59750
[ 3480.225812] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[ 3480.374767] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 3480.374773] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3480.374776] usb 1-3: Product: USB2.0-Ser!
[ 3480.423806] usbcore: registered new interface driver usbserial_generic
[ 3480.423823] usbserial: USB Serial support registered for generic
[ 3480.428017] usbcore: registered new interface driver ch341
[ 3480.428938] usbserial: USB Serial support registered for ch341-uart
[ 3480.429174] ch341 1-3:1.0: ch341-uart converter detected
[ 3480.430076] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 3488.249097] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 3488.299696] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 3498.422017] usb 1-3: failed to send control message: -71
[ 3498.422333] usb 1-3: failed to send control message: -71
[ 4376.121830] perf: interrupt took too long (4193 > 4183), lowering kernel.perf_event_max_sample_rate to 47500
[ 4636.570020] usb 1-3: failed to send control message: -71
[ 4637.065226] usb 1-3: failed to send control message: -71
[ 4637.065708] usb 1-3: failed to send control message: -71
[ 4639.506249] usb 1-3: USB disconnect, device number 4
[ 4639.506423] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 4639.506539] ch341 1-3:1.0: device disconnected
[ 4641.300027] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[ 4641.448559] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 4641.448562] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4641.448563] usb 1-1: Product: USB2.0-Ser!
[ 4641.450128] ch341 1-1:1.0: ch341-uart converter detected
[ 4641.452518] usb 1-1: ch341-uart converter now attached to ttyUSB0
[ 4644.696535] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 4644.696923] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 4644.697161] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 4644.697319] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 4644.795829] usb 1-1: failed to send control message: -71
[ 4645.158510] usb 1-1: failed to send control message: -71
[ 4645.273459] usb 1-1: failed to send control message: -71
[ 4645.273609] usb 1-1: failed to send control message: -71
[ 4646.796009] usb 1-1: USB disconnect, device number 5
[ 4646.796254] usb 1-1: failed to send control message: -19
[ 4646.796577] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 4646.796607] ch341 1-1:1.0: device disconnected
[ 4648.603994] usb 1-3: new full-speed USB device number 6 using xhci_hcd
[ 4648.756598] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 4648.756607] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4648.756612] usb 1-3: Product: USB2.0-Ser!
[ 4648.757970] ch341 1-3:1.0: ch341-uart converter detected
[ 4648.758665] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 4669.285528] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4669.991473] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4669.996984] ata2.00: configured for UDMA/133
[ 4673.807704] PM: suspend entry (deep)
[ 4674.020267] Filesystems sync: 0.212 seconds
[ 4674.020570] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 4674.024243] OOM killer disabled.
[ 4674.024244] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4674.025826] printk: Suspending console(s) (use no_console_suspend to debug)
[ 4674.055522] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4674.057020] sd 0:0:0:0: [sda] Stopping disk
[ 4674.108651] ACPI: EC: interrupt blocked
[ 4674.148173] ACPI: Preparing to enter system sleep state S3
[ 4674.159083] ACPI: EC: event blocked
[ 4674.159084] ACPI: EC: EC stopped
[ 4674.159086] PM: Saving platform NVS memory
[ 4674.159403] Disabling non-boot CPUs ...
[ 4674.160236] IRQ 50: no longer affine to CPU1
[ 4674.161320] smpboot: CPU 1 is now offline
[ 4674.165257] smpboot: CPU 2 is now offline
[ 4674.170619] IRQ 19: no longer affine to CPU3
[ 4674.170623] IRQ 22: no longer affine to CPU3
[ 4674.170626] IRQ 42: no longer affine to CPU3
[ 4674.171661] smpboot: CPU 3 is now offline
[ 4674.175967] ACPI: Low-level resume complete
[ 4674.176033] ACPI: EC: EC started
[ 4674.176035] PM: Restoring platform NVS memory
[ 4674.186569] Enabling non-boot CPUs ...
[ 4674.186738] x86: Booting SMP configuration:
[ 4674.186744] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4674.196705] CPU1 is up
[ 4674.196841] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4674.199952] CPU2 is up
[ 4674.200052] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4674.202975] CPU3 is up
[ 4674.208072] ACPI: Waking up from system sleep state S3
[ 4674.308268] ACPI: EC: interrupt unblocked
[ 4674.371113] ACPI: EC: event unblocked
[ 4674.375789] usb usb1: root hub lost power or was reset
[ 4674.375800] usb usb2: root hub lost power or was reset
[ 4674.376519] rtlwifi: rtlwifi: wireless switch is on
[ 4674.377226] sd 0:0:0:0: [sda] Starting disk
[ 4674.690019] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4674.690067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4674.698891] ata2.00: configured for UDMA/133
[ 4674.766654] ata1.00: configured for UDMA/133
[ 4674.776757] ahci 0000:00:1f.2: port does not support device sleep
[ 4674.780618] ata1.00: Enabling discard_zeroes_data
[ 4674.802228] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 4675.078145] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[ 4677.476783] OOM killer enabled.
[ 4677.476786] Restarting tasks ... 
[ 4677.494802] usb 1-3: USB disconnect, device number 6
[ 4677.494918] usb 1-3: failed to send control message: -19
[ 4677.495043] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 4677.495068] ch341 1-3:1.0: device disconnected
[ 4677.509823] done.
[ 4677.512530] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 4677.513519] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 4677.513522] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 4677.513552] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 4677.513587] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 4677.513602] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 4677.539661] PM: suspend exit
[ 4677.779774] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[ 4677.931387] r8169 0000:02:00.2 enp2s0f2: Link is Down
[ 4678.318490] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 4679.627978] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[ 4679.638156] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[ 4679.639656] wlp3s0: authenticated
[ 4679.641892] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[ 4679.644099] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[ 4679.644338] wlp3s0: associated
[ 4679.652552] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 5156.648780] usb 1-3: new full-speed USB device number 7 using xhci_hcd
[ 5156.797637] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 5156.797643] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5156.797646] usb 1-3: Product: USB2.0-Ser!
[ 5156.799383] ch341 1-3:1.0: ch341-uart converter detected
[ 5156.799961] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 5987.635743] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 5994.935019] usb 1-3: failed to send control message: -71
[ 6348.142671] usb 1-3: failed to send control message: -71
[ 6417.748173] usb 1-3: failed to send control message: -71
[ 6642.226240] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6642.437242] wlp3s0: authenticate with 8e:83:83:be:86:d5
[ 6642.447415] wlp3s0: send auth to 8e:83:83:be:86:d5 (try 1/3)
[ 6642.455787] wlp3s0: authenticated
[ 6642.456872] wlp3s0: associate with 8e:83:83:be:86:d5 (try 1/3)
[ 6642.497664] wlp3s0: RX AssocResp from 8e:83:83:be:86:d5 (capab=0x1431 status=0 aid=1)
[ 6642.497710] wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 2), will use 2
[ 6642.497712] wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 3), will use 2
[ 6642.497922] wlp3s0: associated
[ 6642.539066] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 7073.445413] wlp3s0: deauthenticating from 8e:83:83:be:86:d5 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7073.611001] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[ 7073.621174] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[ 7073.626722] wlp3s0: authenticated
[ 7073.632250] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[ 7073.634438] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=1)
[ 7073.634674] wlp3s0: associated
[ 7073.641845] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 7201.146817] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7203.800529] wlp3s0: authenticate with 8e:83:83:be:86:d5
[ 7203.820371] wlp3s0: send auth to 8e:83:83:be:86:d5 (try 1/3)
[ 7203.825759] wlp3s0: authenticated
[ 7203.827997] wlp3s0: associate with 8e:83:83:be:86:d5 (try 1/3)
[ 7203.864122] wlp3s0: RX AssocResp from 8e:83:83:be:86:d5 (capab=0x1431 status=0 aid=5)
[ 7203.864162] wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 2), will use 2
[ 7203.864163] wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 3), will use 2
[ 7203.864369] wlp3s0: associated
[ 7203.890726] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 7204.549401] usb 1-3: failed to send control message: -71
[ 7247.802653] wlp3s0: deauthenticating from 8e:83:83:be:86:d5 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7248.489477] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7248.496102] ata2.00: configured for UDMA/133
[ 7252.771387] PM: suspend entry (deep)
[ 7252.906678] Filesystems sync: 0.135 seconds
[ 7252.907381] Freezing user space processes ... (elapsed 0.006 seconds) done.
[ 7252.914199] OOM killer disabled.
[ 7252.914200] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7252.915713] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7252.929411] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7252.930941] sd 0:0:0:0: [sda] Stopping disk
[ 7253.054122] ACPI: EC: interrupt blocked
[ 7253.094053] ACPI: Preparing to enter system sleep state S3
[ 7253.105061] ACPI: EC: event blocked
[ 7253.105063] ACPI: EC: EC stopped
[ 7253.105064] PM: Saving platform NVS memory
[ 7253.105390] Disabling non-boot CPUs ...
[ 7253.106219] IRQ 50: no longer affine to CPU1
[ 7253.107611] smpboot: CPU 1 is now offline
[ 7253.110925] smpboot: CPU 2 is now offline
[ 7253.112756] IRQ 19: no longer affine to CPU3
[ 7253.112763] IRQ 42: no longer affine to CPU3
[ 7253.112768] IRQ 43: no longer affine to CPU3
[ 7253.112771] IRQ 44: no longer affine to CPU3
[ 7253.113816] smpboot: CPU 3 is now offline
[ 7253.118518] ACPI: Low-level resume complete
[ 7253.118586] ACPI: EC: EC started
[ 7253.118589] PM: Restoring platform NVS memory
[ 7253.129290] Enabling non-boot CPUs ...
[ 7253.129459] x86: Booting SMP configuration:
[ 7253.129465] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7253.139464] CPU1 is up
[ 7253.139587] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7253.142868] CPU2 is up
[ 7253.142970] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7253.145768] CPU3 is up
[ 7253.150931] ACPI: Waking up from system sleep state S3
[ 7253.251272] ACPI: EC: interrupt unblocked
[ 7253.309378] ACPI: EC: event unblocked
[ 7253.310730] usb usb1: root hub lost power or was reset
[ 7253.310739] usb usb2: root hub lost power or was reset
[ 7253.313324] rtlwifi: rtlwifi: wireless switch is on
[ 7253.315969] sd 0:0:0:0: [sda] Starting disk
[ 7253.627495] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7253.632635] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7253.636393] ata2.00: configured for UDMA/133
[ 7253.715900] ata1.00: configured for UDMA/133
[ 7253.726011] ahci 0000:00:1f.2: port does not support device sleep
[ 7253.730142] ata1.00: Enabling discard_zeroes_data
[ 7253.732426] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 7254.008286] usb 1-3: reset full-speed USB device number 7 using xhci_hcd
[ 7254.284304] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[ 7254.436489] OOM killer enabled.
[ 7254.436491] Restarting tasks ... done.
[ 7254.473703] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 7254.474615] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 7254.474618] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 7254.474694] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 7254.474716] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 7254.474727] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 7254.520083] PM: suspend exit
[ 7254.749341] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[ 7254.905131] r8169 0000:02:00.2 enp2s0f2: Link is Down
[ 7255.282615] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 7256.612089] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[ 7256.622254] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[ 7256.626047] wlp3s0: authenticated
[ 7256.631971] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[ 7256.634240] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[ 7256.634490] wlp3s0: associated
[ 7256.640144] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 7297.003531] asus_wmi: Unknown key cf pressed
[ 7377.231953] usb 1-3: failed to send control message: -71
[ 7377.232135] usb 1-3: failed to send control message: -71
[ 7418.668412] usb 1-3: USB disconnect, device number 7
[ 7418.668578] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 7418.668635] ch341 1-3:1.0: device disconnected
[ 7421.557957] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[ 7421.706482] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7421.706486] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7421.706489] usb 1-3: Product: USB2.0-Ser!
[ 7421.708195] ch341 1-3:1.0: ch341-uart converter detected
[ 7421.708621] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 7425.529562] usb 1-3: failed to send control message: -71
[ 7429.898211] usb 1-3: USB disconnect, device number 8
[ 7429.898451] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 7429.898486] ch341 1-3:1.0: device disconnected
[ 7430.977690] usb 1-1: new full-speed USB device number 9 using xhci_hcd
[ 7431.126315] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7431.126319] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7431.126321] usb 1-1: Product: USB2.0-Ser!
[ 7431.127365] ch341 1-1:1.0: ch341-uart converter detected
[ 7431.127759] usb 1-1: ch341-uart converter now attached to ttyUSB0
[ 7435.736176] usb 1-1: failed to send control message: -71
[ 7436.243199] usb 1-1: failed to send control message: -71
[ 7437.934464] usb 1-1: USB disconnect, device number 9
[ 7437.934680] usb 1-1: failed to send control message: -19
[ 7437.934920] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 7437.934963] ch341 1-1:1.0: device disconnected
[ 7440.401455] usb 1-3: new full-speed USB device number 10 using xhci_hcd
[ 7440.550215] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7440.550225] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7440.550232] usb 1-3: Product: USB2.0-Ser!
[ 7440.551597] ch341 1-3:1.0: ch341-uart converter detected
[ 7440.552087] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 7447.764847] usb 1-3: failed to send control message: -71
[ 7483.336950] usb 1-3: failed to send control message: -71
[ 7532.837689] usb 1-3: failed to send control message: -71
[ 7533.316574] usb 1-3: failed to send control message: -71
[ 7545.422163] usb 1-3: failed to send control message: -71
[ 7545.679973] usb 1-3: failed to send control message: -71
[ 7545.902330] usb 1-3: failed to send control message: -71
[ 7545.902526] usb 1-3: failed to send control message: -71
[ 7557.130182] usb 1-3: failed to send control message: -71
[ 7563.542991] perf: interrupt took too long (5364 > 5241), lowering kernel.perf_event_max_sample_rate to 37250
[ 7563.654143] usb 1-3: failed to send control message: -71
[ 7563.755553] usb 1-3: failed to send control message: -71
[ 7564.302631] usb 1-3: failed to send control message: -71
[ 7564.302948] usb 1-3: failed to send control message: -71
[ 7566.726035] usb 1-3: USB disconnect, device number 10
[ 7566.726329] usb 1-3: failed to send control message: -19
[ 7566.726559] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 7566.726603] ch341 1-3:1.0: device disconnected
[ 7569.890279] usb 1-1: new full-speed USB device number 11 using xhci_hcd
[ 7570.039130] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7570.039136] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7570.039140] usb 1-1: Product: USB2.0-Ser!
[ 7570.040372] ch341 1-1:1.0: ch341-uart converter detected
[ 7570.040987] usb 1-1: ch341-uart converter now attached to ttyUSB0
[ 7570.413850] usb 1-1: failed to send control message: -71
[ 7570.416928] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 7570.417104] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 7570.417818] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 7570.418688] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 7577.092550] usb 1-1: failed to send control message: -71
[ 7577.359534] usb 1-1: failed to send control message: -71
[ 7577.416560] usb 1-1: failed to send control message: -71
[ 7577.416800] usb 1-1: failed to send control message: -71
[ 7577.416985] usb 1-1: failed to send control message: -71
[ 7577.417169] usb 1-1: failed to send control message: -71
[ 7578.941942] usb 1-1: USB disconnect, device number 11
[ 7578.942203] usb 1-1: failed to send control message: -19
[ 7578.942418] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 7578.942457] ch341 1-1:1.0: device disconnected
[ 7580.338015] usb 1-3: new full-speed USB device number 12 using xhci_hcd
[ 7580.486702] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7580.486709] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7580.486714] usb 1-3: Product: USB2.0-Ser!
[ 7580.488467] ch341 1-3:1.0: ch341-uart converter detected
[ 7580.488998] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 7656.389789] usb 1-3: failed to send control message: -71
[ 7656.390463] usb 1-3: failed to send control message: -71
[ 7656.391661] usb 1-3: failed to send control message: -71
[ 7674.977103] usb 1-3: USB disconnect, device number 12
[ 7674.977310] usb 1-3: failed to send control message: -19
[ 7674.977430] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 7674.977453] ch341 1-3:1.0: device disconnected
[ 7677.023832] usb 1-3: new full-speed USB device number 13 using xhci_hcd
[ 7677.172342] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7677.172345] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7677.172348] usb 1-3: Product: USB2.0-Ser!
[ 7677.173653] ch341 1-3:1.0: ch341-uart converter detected
[ 7677.174113] usb 1-3: ch341-uart converter now attached to ttyUSB1
[ 7747.311171] usb 1-3: USB disconnect, device number 13
[ 7747.311505] ch341-uart ttyUSB1: ch341-uart converter now disconnected from ttyUSB1
[ 7747.311541] ch341 1-3:1.0: device disconnected
[ 7748.874336] usb 1-3: new full-speed USB device number 14 using xhci_hcd
[ 7749.023291] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 7749.023298] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7749.023302] usb 1-3: Product: USB2.0-Ser!
[ 7749.025051] ch341 1-3:1.0: ch341-uart converter detected
[ 7749.025429] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 7757.768222] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 7757.776976] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 7757.869055] usb 1-3: failed to send control message: -71
[ 7789.737563] rtlwifi: AP off, try to reconnect now
[ 7789.737638] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[ 7790.882551] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[ 7790.902157] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[ 7790.906376] wlp3s0: authenticated
[ 7790.912082] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[ 7790.914326] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[ 7790.914617] wlp3s0: associated
[ 7950.946265] usb 1-3: failed to send control message: -71
[ 8056.538101] usb 1-3: failed to send control message: -71
[ 8061.943035] usb 1-3: failed to send control message: -71
[ 8970.126614] usb 1-3: failed to send control message: -71
[ 9011.106317] usb 1-3: failed to send control message: -71
[ 9011.106594] usb 1-3: failed to send control message: -71
[ 9019.513075] usb 1-3: failed to send control message: -71
[ 9019.513312] usb 1-3: failed to send control message: -71
[ 9019.513549] usb 1-3: failed to send control message: -71
[ 9020.985811] usb 1-3: USB disconnect, device number 14
[ 9020.986043] usb 1-3: failed to send control message: -19
[ 9020.986254] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 9020.986359] ch341 1-3:1.0: device disconnected
[ 9022.406434] usb 1-3: new full-speed USB device number 15 using xhci_hcd
[ 9022.555429] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 9022.555435] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 9022.555439] usb 1-3: Product: USB2.0-Ser!
[ 9022.556917] ch341 1-3:1.0: ch341-uart converter detected
[ 9022.557480] usb 1-3: ch341-uart converter now attached to ttyUSB0
[ 9029.518069] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 9029.608972] usb 1-3: failed to send control message: -71
[ 9039.295260] usb 1-3: failed to send control message: -71
[ 9039.783942] usb 1-3: failed to send control message: -71
[ 9039.784213] usb 1-3: failed to send control message: -71
[ 9040.457422] usb 1-3: USB disconnect, device number 15
[ 9040.457591] usb 1-3: failed to send control message: -19
[ 9040.457698] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[ 9040.457713] ch341 1-3:1.0: device disconnected
[ 9042.006448] usb 1-1: new full-speed USB device number 16 using xhci_hcd
[ 9042.155045] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[ 9042.155051] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 9042.155055] usb 1-1: Product: USB2.0-Ser!
[ 9042.157095] ch341 1-1:1.0: ch341-uart converter detected
[ 9042.157593] usb 1-1: ch341-uart converter now attached to ttyUSB0
[ 9049.142270] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 9049.142515] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 9049.143457] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 9049.144793] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[ 9049.241173] usb 1-1: failed to send control message: -71
[ 9049.599311] usb 1-1: failed to send control message: -71
[ 9049.843448] usb 1-1: failed to send control message: -71
[ 9049.843619] usb 1-1: failed to send control message: -71
[ 9049.843833] usb 1-1: failed to send control message: -71
[ 9052.095488] usb 1-1: failed to send control message: -71
[ 9054.701268] usb 1-1: failed to send control message: -71
[ 9054.701461] usb 1-1: failed to send control message: -71
[ 9054.701620] usb 1-1: failed to send control message: -71
[ 9054.701828] usb 1-1: failed to send control message: -71
[ 9078.767310] usb 1-1: failed to send control message: -71
[ 9078.767691] usb 1-1: failed to send control message: -71
[ 9078.767858] usb 1-1: failed to send control message: -71
[ 9078.768018] usb 1-1: failed to send control message: -71
[11655.947437] usb 1-1: USB disconnect, device number 16
[11655.947664] usb 1-1: failed to send control message: -19
[11655.947866] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[11655.947901] ch341 1-1:1.0: device disconnected
[13027.613911] perf: interrupt took too long (6720 > 6705), lowering kernel.perf_event_max_sample_rate to 29750
[13581.805102] asus_wmi: Unknown key cf pressed
[14563.649510] usb 1-1: new full-speed USB device number 17 using xhci_hcd
[14563.802201] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[14563.802210] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[14563.802215] usb 1-1: Product: USB2.0-Ser!
[14563.803919] ch341 1-1:1.0: ch341-uart converter detected
[14563.804756] usb 1-1: ch341-uart converter now attached to ttyUSB0
[14606.471537] usb 1-1: failed to send control message: -71
[14758.009859] usb 1-1: failed to send control message: -71
[14758.010063] usb 1-1: failed to send control message: -71
[14758.010251] usb 1-1: failed to send control message: -71
[14758.010431] usb 1-1: failed to send control message: -71
[17641.430189] usb 1-1: failed to send control message: -71
[17791.634115] usb 1-1: failed to send control message: -71
[17800.718255] usb 1-1: failed to send control message: -71
[17800.718647] usb 1-1: failed to send control message: -71
[17800.718767] usb 1-1: failed to send control message: -71
[17803.366887] usb 1-1: failed to send control message: -71
[17804.502127] usb 1-1: failed to send control message: -71
[17919.166990] usb 1-1: failed to send control message: -71
[21443.066572] usb 1-1: failed to send control message: -71
[21443.066883] usb 1-1: failed to send control message: -71
[21443.067119] usb 1-1: failed to send control message: -71
[21451.425524] usb 1-1: failed to send control message: -71
[21451.425676] usb 1-1: failed to send control message: -71
[21451.425796] usb 1-1: failed to send control message: -71
[21451.425955] usb 1-1: failed to send control message: -71
[21455.037244] usb 1-1: failed to send control message: -71
[21455.037426] usb 1-1: failed to send control message: -71
[21455.037549] usb 1-1: failed to send control message: -71
[21455.037673] usb 1-1: failed to send control message: -71
[21736.896857] usb 1-1: failed to send control message: -71
[21784.481294] usb 1-1: failed to send control message: -71
[21792.066649] usb 1-1: failed to send control message: -71
[22401.586053] usb 1-1: failed to send control message: -71
[24495.483951] usb 1-1: failed to send control message: -71
[24577.251452] usb 1-1: failed to send control message: -71
[25134.927746] usb 1-1: failed to send control message: -71
[25136.085486] usb 1-1: failed to send control message: -71
[25136.343114] usb 1-1: failed to send control message: -71
[25146.633777] usb 1-1: failed to send control message: -71
[25147.376993] usb 1-1: failed to send control message: -71
[25147.377217] usb 1-1: failed to send control message: -71
[25147.377412] usb 1-1: failed to send control message: -71
[25152.892709] usb 1-1: USB disconnect, device number 17
[25152.893066] usb 1-1: failed to send control message: -19
[25152.893408] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[25152.893511] ch341 1-1:1.0: device disconnected
[25154.513712] usb 1-3: new full-speed USB device number 18 using xhci_hcd
[25154.662269] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[25154.662273] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[25154.662275] usb 1-3: Product: USB2.0-Ser!
[25154.663286] ch341 1-3:1.0: ch341-uart converter detected
[25154.663670] usb 1-3: ch341-uart converter now attached to ttyUSB0
[25163.217255] usb 1-3: failed to send control message: -71
[25206.684043] usb 1-3: USB disconnect, device number 18
[25206.684239] usb 1-3: failed to send control message: -19
[25206.684346] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[25206.684370] ch341 1-3:1.0: device disconnected
[25208.841109] usb 1-3: new full-speed USB device number 19 using xhci_hcd
[25208.989850] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[25208.989856] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[25208.989859] usb 1-3: Product: USB2.0-Ser!
[25208.992225] ch341 1-3:1.0: ch341-uart converter detected
[25208.992687] usb 1-3: ch341-uart converter now attached to ttyUSB0
[25221.703283] usb 1-3: failed to send control message: -71
[25222.115650] usb 1-3: failed to send control message: -71
[25231.083937] usb 1-3: failed to send control message: -71
[25231.085547] usb 1-3: failed to send control message: -71
[25231.291814] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[25231.343323] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[25241.869314] usb 1-3: failed to send control message: -71
[25241.869472] usb 1-3: failed to send control message: -71
[25645.442207] usb 1-3: failed to send control message: -71
[26017.549559] usb 1-3: failed to send control message: -71
[26039.060162] usb 1-3: failed to send control message: -71
[26043.517622] usb 1-3: USB disconnect, device number 19
[26043.519255] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[26043.519427] ch341 1-3:1.0: device disconnected
[26045.360368] usb 1-1: new full-speed USB device number 20 using xhci_hcd
[26045.508883] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[26045.508887] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[26045.508889] usb 1-1: Product: USB2.0-Ser!
[26045.511544] ch341 1-1:1.0: ch341-uart converter detected
[26045.511966] usb 1-1: ch341-uart converter now attached to ttyUSB0
[26048.958048] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[26048.958279] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[26048.959042] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[26048.959280] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[26049.059067] usb 1-1: failed to send control message: -71
[26049.409471] usb 1-1: failed to send control message: -71
[26049.495924] usb 1-1: failed to send control message: -71
[26049.496113] usb 1-1: failed to send control message: -71
[26058.555403] usb 1-1: failed to send control message: -71
[26058.555556] usb 1-1: failed to send control message: -71
[26058.555757] usb 1-1: failed to send control message: -71
[26059.083028] usb 1-1: failed to send control message: -71
[26059.083630] usb 1-1: failed to send control message: -71
[26061.317919] usb 1-1: failed to send control message: -71
[26101.947649] usb 1-1: USB disconnect, device number 20
[26101.947948] usb 1-1: failed to send control message: -19
[26101.949853] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[26101.949882] ch341 1-1:1.0: device disconnected
[26103.135740] usb 1-3: new full-speed USB device number 21 using xhci_hcd
[26103.287085] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[26103.287090] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[26103.287093] usb 1-3: Product: USB2.0-Ser!
[26103.289037] ch341 1-3:1.0: ch341-uart converter detected
[26103.289503] usb 1-3: ch341-uart converter now attached to ttyUSB0
[26114.559638] usb 1-3: failed to send control message: -71
[26114.714393] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[26124.654511] usb 1-3: failed to send control message: -71
[26127.791747] usb 1-3: failed to send control message: -71
[26128.838720] usb 1-3: failed to send control message: -71
[26129.953544] perf: interrupt took too long (8425 > 8400), lowering kernel.perf_event_max_sample_rate to 23500
[26130.089288] usb 1-3: failed to send control message: -71
[26720.892065] usb 1-3: failed to send control message: -71
[26720.892333] usb 1-3: failed to send control message: -71
[26747.932015] usb 1-3: failed to send control message: -71
[26747.932309] usb 1-3: failed to send control message: -71
[27051.263364] usb 1-3: failed to send control message: -71
[27359.733895] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[27360.421904] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[27360.427951] ata2.00: configured for UDMA/133
[27367.586854] PM: suspend entry (deep)
[27367.769928] Filesystems sync: 0.183 seconds
[27367.781284] Freezing user space processes ... (elapsed 0.008 seconds) done.
[27367.789918] OOM killer disabled.
[27367.789919] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[27367.791406] printk: Suspending console(s) (use no_console_suspend to debug)
[27367.809925] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[27367.812197] sd 0:0:0:0: [sda] Stopping disk
[27367.934659] ACPI: EC: interrupt blocked
[27367.974538] ACPI: Preparing to enter system sleep state S3
[27367.986055] ACPI: EC: event blocked
[27367.986057] ACPI: EC: EC stopped
[27367.986058] PM: Saving platform NVS memory
[27367.986363] Disabling non-boot CPUs ...
[27367.987207] IRQ 50: no longer affine to CPU1
[27367.988268] smpboot: CPU 1 is now offline
[27367.991408] smpboot: CPU 2 is now offline
[27367.995631] IRQ 19: no longer affine to CPU3
[27367.995639] IRQ 42: no longer affine to CPU3
[27367.995644] IRQ 43: no longer affine to CPU3
[27367.995649] IRQ 44: no longer affine to CPU3
[27367.996691] smpboot: CPU 3 is now offline
[27368.000516] ACPI: Low-level resume complete
[27368.000583] ACPI: EC: EC started
[27368.000586] PM: Restoring platform NVS memory
[27368.011445] Enabling non-boot CPUs ...
[27368.011611] x86: Booting SMP configuration:
[27368.011617] smpboot: Booting Node 0 Processor 1 APIC 0x2
[27368.021532] CPU1 is up
[27368.021657] smpboot: Booting Node 0 Processor 2 APIC 0x1
[27368.024909] CPU2 is up
[27368.025007] smpboot: Booting Node 0 Processor 3 APIC 0x3
[27368.027778] CPU3 is up
[27368.032938] ACPI: Waking up from system sleep state S3
[27368.134888] ACPI: EC: interrupt unblocked
[27368.193383] ACPI: EC: event unblocked
[27368.196437] usb usb1: root hub lost power or was reset
[27368.196447] usb usb2: root hub lost power or was reset
[27368.196578] rtlwifi: rtlwifi: wireless switch is on
[27368.196610] sd 0:0:0:0: [sda] Starting disk
[27368.512702] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[27368.512746] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[27368.521627] ata2.00: configured for UDMA/133
[27368.620943] ata1.00: configured for UDMA/133
[27368.624640] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[27368.631056] ahci 0000:00:1f.2: port does not support device sleep
[27368.640965] ata1.00: Enabling discard_zeroes_data
[27368.900515] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[27369.176607] usb 1-3: reset full-speed USB device number 21 using xhci_hcd
[27369.327302] OOM killer enabled.
[27369.327304] Restarting tasks ... done.
[27369.384487] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[27369.385610] Bluetooth: hci0: RTL: rom_version status=0 version=1
[27369.385613] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[27369.385641] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[27369.385677] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[27369.385691] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[27369.415867] PM: suspend exit
[27369.679083] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[27369.833248] r8169 0000:02:00.2 enp2s0f2: Link is Down
[27370.191613] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[27372.083207] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[27372.093624] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[27372.097055] wlp3s0: authenticated
[27372.104260] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[27372.106456] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[27372.106689] wlp3s0: associated
[27372.110946] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[27749.406397] usb 1-3: failed to send control message: -71
[28133.168307] rtlwifi: AP off, try to reconnect now
[28133.168326] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[28134.334056] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[28134.352855] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[28134.354142] wlp3s0: authenticated
[28134.356517] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[28134.358629] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[28134.358883] wlp3s0: associated
[30768.878890] usb 1-3: failed to send control message: -71
[31196.069942] usb 1-3: failed to send control message: -71
[33593.224456] usb 1-3: failed to send control message: -71
[33593.224607] usb 1-3: failed to send control message: -71
[35331.196579] asus_wmi: Unknown key cf pressed
[39344.909549] usb 1-3: failed to send control message: -71
[39862.971793] usb 1-3: failed to send control message: -71
[41063.253253] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[41067.394441] PM: suspend entry (deep)
[41067.458411] Filesystems sync: 0.063 seconds
[41067.458808] Freezing user space processes ... (elapsed 0.006 seconds) done.
[41067.465258] OOM killer disabled.
[41067.465259] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[41067.466732] printk: Suspending console(s) (use no_console_suspend to debug)
[41067.585238] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[41067.585849] sd 0:0:0:0: [sda] Stopping disk
[41067.638495] ACPI: EC: interrupt blocked
[41067.678015] ACPI: Preparing to enter system sleep state S3
[41067.689684] ACPI: EC: event blocked
[41067.689686] ACPI: EC: EC stopped
[41067.689687] PM: Saving platform NVS memory
[41067.689992] Disabling non-boot CPUs ...
[41067.690799] IRQ 50: no longer affine to CPU1
[41067.691861] smpboot: CPU 1 is now offline
[41067.694791] smpboot: CPU 2 is now offline
[41067.698027] IRQ 19: no longer affine to CPU3
[41067.698034] IRQ 42: no longer affine to CPU3
[41067.698037] IRQ 43: no longer affine to CPU3
[41067.698041] IRQ 44: no longer affine to CPU3
[41067.699055] smpboot: CPU 3 is now offline
[41067.702985] ACPI: Low-level resume complete
[41067.703040] ACPI: EC: EC started
[41067.703041] PM: Restoring platform NVS memory
[41067.713346] Enabling non-boot CPUs ...
[41067.713405] x86: Booting SMP configuration:
[41067.713406] smpboot: Booting Node 0 Processor 1 APIC 0x2
[41067.717429] CPU1 is up
[41067.717557] smpboot: Booting Node 0 Processor 2 APIC 0x1
[41067.719223] CPU2 is up
[41067.719269] smpboot: Booting Node 0 Processor 3 APIC 0x3
[41067.720657] CPU3 is up
[41067.723004] ACPI: Waking up from system sleep state S3
[41067.828004] ACPI: EC: interrupt unblocked
[41067.888459] ACPI: EC: event unblocked
[41067.890439] sd 0:0:0:0: [sda] Starting disk
[41067.891077] rtlwifi: rtlwifi: wireless switch is on
[41068.200037] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[41068.203674] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[41068.203705] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[41068.212433] ata2.00: configured for UDMA/133
[41068.311696] ata1.00: configured for UDMA/133
[41068.321880] ahci 0000:00:1f.2: port does not support device sleep
[41068.322436] ata1.00: Enabling discard_zeroes_data
[41068.475902] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[41068.650294] OOM killer enabled.
[41068.650296] Restarting tasks ... done.
[41068.679339] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[41068.680543] Bluetooth: hci0: RTL: rom_version status=0 version=1
[41068.680545] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[41068.680636] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[41068.680661] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[41068.680677] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[41068.697770] PM: suspend exit
[41068.926976] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[41069.084448] r8169 0000:02:00.2 enp2s0f2: Link is Down
[41069.487319] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[41071.305211] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[41071.315382] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[41071.317128] wlp3s0: authenticated
[41071.319483] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[41071.321711] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[41071.321952] wlp3s0: associated
[41071.325964] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[51777.859181] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[51782.257840] PM: suspend entry (deep)
[51782.269483] Filesystems sync: 0.011 seconds
[51782.269900] Freezing user space processes ... (elapsed 0.003 seconds) done.
[51782.273121] OOM killer disabled.
[51782.273122] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[51782.274274] printk: Suspending console(s) (use no_console_suspend to debug)
[51782.394032] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[51782.397474] sd 0:0:0:0: [sda] Stopping disk
[51782.447221] ACPI: EC: interrupt blocked
[51782.486799] ACPI: Preparing to enter system sleep state S3
[51782.498943] ACPI: EC: event blocked
[51782.498944] ACPI: EC: EC stopped
[51782.498945] PM: Saving platform NVS memory
[51782.499254] Disabling non-boot CPUs ...
[51782.499977] IRQ 50: no longer affine to CPU1
[51782.500999] smpboot: CPU 1 is now offline
[51782.505229] smpboot: CPU 2 is now offline
[51782.508868] IRQ 19: no longer affine to CPU3
[51782.508875] IRQ 42: no longer affine to CPU3
[51782.508879] IRQ 43: no longer affine to CPU3
[51782.508883] IRQ 44: no longer affine to CPU3
[51782.509923] smpboot: CPU 3 is now offline
[51782.512961] ACPI: Low-level resume complete
[51782.513028] ACPI: EC: EC started
[51782.513031] PM: Restoring platform NVS memory
[51782.528414] Enabling non-boot CPUs ...
[51782.528467] x86: Booting SMP configuration:
[51782.528469] smpboot: Booting Node 0 Processor 1 APIC 0x2
[51782.532631] CPU1 is up
[51782.532669] smpboot: Booting Node 0 Processor 2 APIC 0x1
[51782.534551] CPU2 is up
[51782.534582] smpboot: Booting Node 0 Processor 3 APIC 0x3
[51782.537200] CPU3 is up
[51782.542626] ACPI: Waking up from system sleep state S3
[51782.643255] ACPI: EC: interrupt unblocked
[51782.701692] ACPI: EC: event unblocked
[51782.703466] rtlwifi: rtlwifi: wireless switch is on
[51782.704298] sd 0:0:0:0: [sda] Starting disk
[51782.973176] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[51783.021095] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[51783.021148] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[51783.029995] ata2.00: configured for UDMA/133
[51783.125546] ata1.00: configured for UDMA/133
[51783.135715] ahci 0000:00:1f.2: port does not support device sleep
[51783.146389] ata1.00: Enabling discard_zeroes_data
[51783.248910] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[51785.647184] OOM killer enabled.
[51785.647186] Restarting tasks ... 
[51785.647264] usb 1-3: USB disconnect, device number 21
[51785.647484] usb 1-3: failed to send control message: -19
[51785.672720] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[51785.672764] ch341 1-3:1.0: device disconnected
[51785.672879] done.
[51785.693592] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[51785.694635] Bluetooth: hci0: RTL: rom_version status=0 version=1
[51785.694637] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[51785.694657] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[51785.694685] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[51785.694695] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[51785.723935] PM: suspend exit
[51786.118404] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[51786.269354] r8169 0000:02:00.2 enp2s0f2: Link is Down
[51786.541454] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[51788.577892] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[51788.588066] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[51788.589608] wlp3s0: authenticated
[51788.592371] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[51788.594890] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[51788.595125] wlp3s0: associated
[51788.599456] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[52146.405747] rtlwifi: AP off, try to reconnect now
[52146.405807] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[52147.547633] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[52147.566860] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[52147.569974] wlp3s0: authenticated
[52147.574298] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[52147.576544] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[52147.576806] wlp3s0: associated
[52580.648461] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[52581.333737] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[52581.339340] ata2.00: configured for UDMA/133
[52585.229196] PM: suspend entry (deep)
[52585.245886] Filesystems sync: 0.016 seconds
[52585.246271] Freezing user space processes ... (elapsed 0.003 seconds) done.
[52585.249841] OOM killer disabled.
[52585.249842] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[52585.251306] printk: Suspending console(s) (use no_console_suspend to debug)
[52585.269940] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[52585.270645] sd 0:0:0:0: [sda] Stopping disk
[52585.330764] ACPI: EC: interrupt blocked
[52585.370400] ACPI: Preparing to enter system sleep state S3
[52585.381766] ACPI: EC: event blocked
[52585.381768] ACPI: EC: EC stopped
[52585.381769] PM: Saving platform NVS memory
[52585.382073] Disabling non-boot CPUs ...
[52585.383939] smpboot: CPU 1 is now offline
[52585.386823] smpboot: CPU 2 is now offline
[52585.389857] smpboot: CPU 3 is now offline
[52585.392861] ACPI: Low-level resume complete
[52585.392913] ACPI: EC: EC started
[52585.392916] PM: Restoring platform NVS memory
[52585.403877] Enabling non-boot CPUs ...
[52585.404047] x86: Booting SMP configuration:
[52585.404053] smpboot: Booting Node 0 Processor 1 APIC 0x2
[52585.408332] CPU1 is up
[52585.408461] smpboot: Booting Node 0 Processor 2 APIC 0x1
[52585.410478] CPU2 is up
[52585.410577] smpboot: Booting Node 0 Processor 3 APIC 0x3
[52585.412814] CPU3 is up
[52585.418147] ACPI: Waking up from system sleep state S3
[52585.521004] ACPI: EC: interrupt unblocked
[52585.581353] ACPI: EC: event unblocked
[52585.585152] sd 0:0:0:0: [sda] Starting disk
[52585.585175] rtlwifi: rtlwifi: wireless switch is on
[52585.852701] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[52585.900910] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[52585.900964] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[52585.910686] ata2.00: configured for UDMA/133
[52586.005313] ata1.00: configured for UDMA/133
[52586.015539] ahci 0000:00:1f.2: port does not support device sleep
[52586.016046] ata1.00: Enabling discard_zeroes_data
[52586.128524] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[52586.280651] OOM killer enabled.
[52586.280653] Restarting tasks ... done.
[52586.326100] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[52586.327088] Bluetooth: hci0: RTL: rom_version status=0 version=1
[52586.327091] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[52586.327202] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[52586.327231] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[52586.327249] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[52586.376854] PM: suspend exit
[52586.614063] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[52586.765087] r8169 0000:02:00.2 enp2s0f2: Link is Down
[52587.137084] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[52588.489282] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[52588.500007] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[52588.503141] wlp3s0: authenticated
[52588.504255] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[52588.506836] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[52588.507080] wlp3s0: associated
[52588.511528] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[53375.588818] rtlwifi: AP off, try to reconnect now
[53375.588882] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[53376.735863] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[53376.754221] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[53376.755691] wlp3s0: authenticated
[53376.758087] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[53376.760258] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[53376.760504] wlp3s0: associated
[56447.824716] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[56449.123844] PM: suspend entry (deep)
[56449.147784] Filesystems sync: 0.023 seconds
[56449.148326] Freezing user space processes ... (elapsed 0.265 seconds) done.
[56449.414151] OOM killer disabled.
[56449.414152] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[56449.416161] printk: Suspending console(s) (use no_console_suspend to debug)
[56449.433206] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[56449.436781] sd 0:0:0:0: [sda] Stopping disk
[56450.441641] ACPI: EC: interrupt blocked
[56450.481662] ACPI: Preparing to enter system sleep state S3
[56450.492192] ACPI: EC: event blocked
[56450.492193] ACPI: EC: EC stopped
[56450.492195] PM: Saving platform NVS memory
[56450.492499] Disabling non-boot CPUs ...
[56450.494295] smpboot: CPU 1 is now offline
[56450.498556] smpboot: CPU 2 is now offline
[56450.500284] IRQ 45: no longer affine to CPU3
[56450.501303] smpboot: CPU 3 is now offline
[56450.504364] ACPI: Low-level resume complete
[56450.504403] ACPI: EC: EC started
[56450.504404] PM: Restoring platform NVS memory
[56450.519289] Enabling non-boot CPUs ...
[56450.519702] x86: Booting SMP configuration:
[56450.519704] smpboot: Booting Node 0 Processor 1 APIC 0x2
[56450.528187] CPU1 is up
[56450.528326] smpboot: Booting Node 0 Processor 2 APIC 0x1
[56450.530558] CPU2 is up
[56450.530589] smpboot: Booting Node 0 Processor 3 APIC 0x3
[56450.533364] CPU3 is up
[56450.538754] ACPI: Waking up from system sleep state S3
[56450.632363] ACPI: EC: interrupt unblocked
[56450.692648] ACPI: EC: event unblocked
[56450.694615] rtlwifi: rtlwifi: wireless switch is on
[56450.694731] sd 0:0:0:0: [sda] Starting disk
[56450.959920] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[56451.007510] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[56451.012020] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[56451.016347] ata2.00: configured for UDMA/133
[56451.115651] ata1.00: configured for UDMA/133
[56451.125834] ahci 0000:00:1f.2: port does not support device sleep
[56451.134191] ata1.00: Enabling discard_zeroes_data
[56451.235960] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[56451.387787] OOM killer enabled.
[56451.387789] Restarting tasks ... done.
[56451.443282] PM: suspend exit
[56451.444321] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[56451.445323] Bluetooth: hci0: RTL: rom_version status=0 version=1
[56451.445327] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[56451.445350] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[56451.445384] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[56451.445396] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[56451.702387] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[56451.856624] r8169 0000:02:00.2 enp2s0f2: Link is Down
[56452.251315] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[56454.056483] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[56454.066640] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[56454.068084] wlp3s0: authenticated
[56454.071603] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[56454.073849] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[56454.074106] wlp3s0: associated
[56454.078490] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[58751.284414] rtlwifi: AP off, try to reconnect now
[58751.284450] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[58752.443329] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[58752.461704] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[58752.463136] wlp3s0: authenticated
[58752.468395] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[58752.470742] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[58752.470982] wlp3s0: associated
[59800.918867] perf: interrupt took too long (12533 > 10531), lowering kernel.perf_event_max_sample_rate to 15750
[62645.516802] usb 1-3: new full-speed USB device number 22 using xhci_hcd
[62645.665403] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[62645.665412] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[62645.665416] usb 1-3: Product: USB2.0-Ser!
[62645.666695] ch341 1-3:1.0: ch341-uart converter detected
[62645.667248] usb 1-3: ch341-uart converter now attached to ttyUSB0
[62686.443787] usb 1-3: failed to send control message: -71
[62726.613207] usb 1-3: failed to send control message: -71
[62801.930324] usb 1-3: failed to send control message: -71
[62935.628708] usb 1-3: failed to send control message: -71
[63314.321215] usb 1-3: failed to send control message: -71
[63314.321932] usb 1-3: failed to send control message: -71
[63322.003612] usb 1-3: failed to send control message: -71
[64443.615903] usb 1-3: failed to send control message: -71
[64443.616118] usb 1-3: failed to send control message: -71
[64443.616369] usb 1-3: failed to send control message: -71
[64457.378014] usb 1-3: failed to send control message: -71
[64457.378346] usb 1-3: failed to send control message: -71
[64492.327729] usb 1-3: failed to send control message: -71
[64492.328242] usb 1-3: failed to send control message: -71
[64492.328443] usb 1-3: failed to send control message: -71
[64566.049977] usb 1-3: failed to send control message: -71
[64566.050174] usb 1-3: failed to send control message: -71
[64577.442320] usb 1-3: failed to send control message: -71
[64649.843431] usb 1-3: failed to send control message: -71
[64649.994703] usb 1-3: failed to send control message: -71
[64730.188816] usb 1-3: failed to send control message: -71
[65286.725260] usb 1-3: failed to send control message: -71
[65286.725383] usb 1-3: failed to send control message: -71
[65414.051329] usb 1-3: failed to send control message: -71
[65414.589016] usb 1-3: failed to send control message: -71
[65426.590720] usb 1-3: failed to send control message: -71
[65429.301605] usb 1-3: USB disconnect, device number 22
[65429.301777] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[65429.301873] ch341 1-3:1.0: device disconnected
[65431.174779] usb 1-1: new full-speed USB device number 23 using xhci_hcd
[65431.323371] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[65431.323374] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[65431.323375] usb 1-1: Product: USB2.0-Ser!
[65431.324436] ch341 1-1:1.0: ch341-uart converter detected
[65431.324819] usb 1-1: ch341-uart converter now attached to ttyUSB0
[65446.509676] usb 1-1: failed to send control message: -71
[65446.509982] usb 1-1: failed to send control message: -71
[65446.510294] usb 1-1: failed to send control message: -71
[65452.186072] usb 1-1: failed to send control message: -71
[65452.186852] usb 1-1: failed to send control message: -71
[65544.273694] usb 1-1: failed to send control message: -71
[65544.273926] usb 1-1: failed to send control message: -71
[65544.274123] usb 1-1: failed to send control message: -71
[65544.810463] usb 1-1: failed to send control message: -71
[65558.792867] usb 1-1: failed to send control message: -71
[65566.424248] usb 1-1: failed to send control message: -71
[65566.424527] usb 1-1: failed to send control message: -71
[65566.424828] usb 1-1: failed to send control message: -71
[65566.425056] usb 1-1: failed to send control message: -71
[65608.422097] usb 1-1: failed to send control message: -71
[65608.422239] usb 1-1: failed to send control message: -71
[65608.993093] usb 1-1: failed to send control message: -71
[65608.993287] usb 1-1: failed to send control message: -71
[65628.032208] usb 1-1: failed to send control message: -71
[65628.032535] usb 1-1: failed to send control message: -71
[65631.834924] usb 1-1: failed to send control message: -71
[65757.546281] usb 1-1: failed to send control message: -71
[65757.547810] usb 1-1: failed to send control message: -71
[65769.754649] usb 1-1: failed to send control message: -71
[65769.755504] usb 1-1: failed to send control message: -71
[65769.755728] usb 1-1: failed to send control message: -71
[65771.806433] usb 1-1: USB disconnect, device number 23
[65771.806673] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[65771.806752] ch341 1-1:1.0: device disconnected
[65773.426831] usb 1-3: new full-speed USB device number 24 using xhci_hcd
[65773.575340] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[65773.575342] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[65773.575344] usb 1-3: Product: USB2.0-Ser!
[65773.576374] ch341 1-3:1.0: ch341-uart converter detected
[65773.576715] usb 1-3: ch341-uart converter now attached to ttyUSB0
[66303.275950] usb 1-3: failed to send control message: -71
[66303.801506] usb 1-3: failed to send control message: -71
[66322.740194] usb 1-3: failed to send control message: -71
[66948.560316] usb 1-3: failed to send control message: -71
[66948.561001] usb 1-3: failed to send control message: -71
[66948.561673] usb 1-3: failed to send control message: -71
[66948.561965] usb 1-3: failed to send control message: -71
[66949.097684] usb 1-3: failed to send control message: -71
[66959.541693] usb 1-3: failed to send control message: -71
[66959.993598] usb 1-3: failed to send control message: -71
[67114.828726] usb 1-3: failed to send control message: -71
[67586.105400] usb 1-3: failed to send control message: -71
[67755.206594] usb 1-3: failed to send control message: -71
[67789.651067] usb 1-3: failed to send control message: -71
[67832.331518] usb 1-3: failed to send control message: -71
[68012.437044] usb 1-3: failed to send control message: -71
[68012.437238] usb 1-3: failed to send control message: -71
[68033.150036] usb 1-3: failed to send control message: -71
[68033.251606] usb 1-3: failed to send control message: -71
[68051.108586] usb 1-3: failed to send control message: -71
[68527.420780] usb 1-3: failed to send control message: -71
[68634.414172] usb 1-3: failed to send control message: -71
[68634.901106] usb 1-3: failed to send control message: -71
[68644.826933] usb 1-3: failed to send control message: -71
[68644.827539] usb 1-3: failed to send control message: -71
[68644.928880] usb 1-3: failed to send control message: -71
[68662.905058] usb 1-3: failed to send control message: -71
[68971.960999] usb 1-3: failed to send control message: -71
[69231.596485] usb 1-3: USB disconnect, device number 24
[69231.596952] usb 1-3: failed to send control message: -19
[69231.598969] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[69231.598994] ch341 1-3:1.0: device disconnected
[71166.000085] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[71166.779138] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[71166.785252] ata2.00: configured for UDMA/133
[71171.036091] PM: suspend entry (deep)
[71171.076177] Filesystems sync: 0.040 seconds
[71171.076826] Freezing user space processes ... (elapsed 0.004 seconds) done.
[71171.081291] OOM killer disabled.
[71171.081292] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[71171.082808] printk: Suspending console(s) (use no_console_suspend to debug)
[71171.099419] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[71171.100229] sd 0:0:0:0: [sda] Stopping disk
[71171.156204] ACPI: EC: interrupt blocked
[71171.195918] ACPI: Preparing to enter system sleep state S3
[71171.207883] ACPI: EC: event blocked
[71171.207885] ACPI: EC: EC stopped
[71171.207886] PM: Saving platform NVS memory
[71171.208195] Disabling non-boot CPUs ...
[71171.210404] smpboot: CPU 1 is now offline
[71171.213580] smpboot: CPU 2 is now offline
[71171.215499] IRQ 45: no longer affine to CPU3
[71171.216519] smpboot: CPU 3 is now offline
[71171.221145] ACPI: Low-level resume complete
[71171.221211] ACPI: EC: EC started
[71171.221215] PM: Restoring platform NVS memory
[71171.236236] Enabling non-boot CPUs ...
[71171.236292] x86: Booting SMP configuration:
[71171.236293] smpboot: Booting Node 0 Processor 1 APIC 0x2
[71171.244328] CPU1 is up
[71171.244463] smpboot: Booting Node 0 Processor 2 APIC 0x1
[71171.247424] CPU2 is up
[71171.247529] smpboot: Booting Node 0 Processor 3 APIC 0x3
[71171.250110] CPU3 is up
[71171.255755] ACPI: Waking up from system sleep state S3
[71171.351955] ACPI: EC: interrupt unblocked
[71171.410819] ACPI: EC: event unblocked
[71171.413078] rtlwifi: rtlwifi: wireless switch is on
[71171.413486] sd 0:0:0:0: [sda] Starting disk
[71171.678050] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[71171.730013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[71171.733961] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[71171.738740] ata2.00: configured for UDMA/133
[71171.838236] ata1.00: configured for UDMA/133
[71171.848336] ahci 0000:00:1f.2: port does not support device sleep
[71171.858137] ata1.00: Enabling discard_zeroes_data
[71171.954148] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[71172.105341] OOM killer enabled.
[71172.105343] Restarting tasks ... done.
[71172.142322] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[71172.143514] Bluetooth: hci0: RTL: rom_version status=0 version=1
[71172.143518] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[71172.143948] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[71172.143978] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[71172.143990] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[71172.162380] PM: suspend exit
[71172.405248] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[71172.554588] r8169 0000:02:00.2 enp2s0f2: Link is Down
[71172.952518] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[71174.795140] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[71174.805483] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[71174.806761] wlp3s0: authenticated
[71174.809599] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[71174.811800] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[71174.812054] wlp3s0: associated
[71174.816944] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[71205.077257] usb 1-1: new full-speed USB device number 25 using xhci_hcd
[71205.225941] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[71205.225947] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[71205.225951] usb 1-1: Product: USB2.0-Ser!
[71205.227272] ch341 1-1:1.0: ch341-uart converter detected
[71205.227819] usb 1-1: ch341-uart converter now attached to ttyUSB0
[71244.761684] usb 1-1: USB disconnect, device number 25
[71244.761913] usb 1-1: failed to send control message: -19
[71244.762178] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[71244.762275] ch341 1-1:1.0: device disconnected
[71772.507079] rtlwifi: AP off, try to reconnect now
[71772.507104] wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
[71773.684507] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[71773.703504] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[71773.704803] wlp3s0: authenticated
[71773.711009] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[71773.713157] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[71773.713408] wlp3s0: associated
[72542.162543] usb 1-3: new full-speed USB device number 26 using xhci_hcd
[72542.311113] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[72542.311118] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[72542.311122] usb 1-3: Product: USB2.0-Ser!
[72542.312456] ch341 1-3:1.0: ch341-uart converter detected
[72542.313903] usb 1-3: ch341-uart converter now attached to ttyUSB0
[72551.321297] usb 1-3: failed to send control message: -71
[72551.321803] usb 1-3: failed to send control message: -71
[72551.322006] usb 1-3: failed to send control message: -71
[72554.981750] usb 1-3: USB disconnect, device number 26
[72554.981915] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[72554.981933] ch341 1-3:1.0: device disconnected
[72559.786318] usb 1-3: new full-speed USB device number 27 using xhci_hcd
[72559.934865] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[72559.934867] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[72559.934869] usb 1-3: Product: USB2.0-Ser!
[72559.938834] ch341 1-3:1.0: ch341-uart converter detected
[72559.939518] usb 1-3: ch341-uart converter now attached to ttyUSB0
[72569.371136] usb 1-3: failed to send control message: -71
[72674.718484] usb 1-3: failed to send control message: -71
[72828.778851] usb 1-3: failed to send control message: -71
[72828.779046] usb 1-3: failed to send control message: -71
[72944.608266] usb 1-3: failed to send control message: -71
[72944.609592] usb 1-3: failed to send control message: -71
[72954.377638] usb 1-3: failed to send control message: -71
[72954.378122] usb 1-3: failed to send control message: -71
[72954.532807] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[72962.110297] usb 1-3: failed to send control message: -71
[73035.385514] usb 1-3: failed to send control message: -71
[73043.085717] usb 1-3: failed to send control message: -71
[73043.085949] usb 1-3: failed to send control message: -71
[73043.086193] usb 1-3: failed to send control message: -71
[73127.905539] usb 1-3: failed to send control message: -71
[73127.905706] usb 1-3: failed to send control message: -71
[73257.457628] usb 1-3: failed to send control message: -71
[73257.457784] usb 1-3: failed to send control message: -71
[73371.716864] usb 1-3: failed to send control message: -71
[73501.442982] usb 1-3: failed to send control message: -71
[73512.911544] usb 1-3: failed to send control message: -71
[73512.911702] usb 1-3: failed to send control message: -71
[73523.398350] usb 1-3: failed to send control message: -71
[73523.688663] usb 1-3: failed to send control message: -71
[73523.925335] usb 1-3: failed to send control message: -71
[73523.925620] usb 1-3: failed to send control message: -71
[73526.107450] usb 1-3: USB disconnect, device number 27
[73526.107677] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[73526.107798] ch341 1-3:1.0: device disconnected
[73527.991071] usb 1-1: new full-speed USB device number 28 using xhci_hcd
[73528.139637] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[73528.139641] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[73528.139643] usb 1-1: Product: USB2.0-Ser!
[73528.140888] ch341 1-1:1.0: ch341-uart converter detected
[73528.141240] usb 1-1: ch341-uart converter now attached to ttyUSB0
[73540.662357] usb 1-1: failed to send control message: -71
[73540.662492] usb 1-1: failed to send control message: -71
[73540.662669] usb 1-1: failed to send control message: -71
[73543.978255] usb 1-1: failed to send control message: -71
[73545.076876] usb 1-1: failed to send control message: -71
[73545.076990] usb 1-1: failed to send control message: -71
[73545.077119] usb 1-1: failed to send control message: -71
[73549.637214] usb 1-1: failed to send control message: -71
[73550.277822] usb 1-1: failed to send control message: -71
[73550.277967] usb 1-1: failed to send control message: -71
[73550.278076] usb 1-1: failed to send control message: -71
[73651.018211] usb 1-1: failed to send control message: -71
[73651.018420] usb 1-1: failed to send control message: -71
[73651.018726] usb 1-1: failed to send control message: -71
[73651.018980] usb 1-1: failed to send control message: -71
[73752.926229] usb 1-1: failed to send control message: -71
[73753.387826] usb 1-1: failed to send control message: -71
[73753.388054] usb 1-1: failed to send control message: -71
[73762.916212] usb 1-1: failed to send control message: -71
[73770.695727] usb 1-1: failed to send control message: -71
[73770.695969] usb 1-1: failed to send control message: -71
[73770.696164] usb 1-1: failed to send control message: -71
[73770.696654] usb 1-1: failed to send control message: -71
[73775.009774] usb 1-1: failed to send control message: -71
[73775.010246] usb 1-1: failed to send control message: -71
[73775.010625] usb 1-1: failed to send control message: -71
[73777.641489] usb 1-1: failed to send control message: -71
[73777.641669] usb 1-1: failed to send control message: -71
[73777.641829] usb 1-1: failed to send control message: -71
[73779.073474] usb 1-1: failed to send control message: -71
[73779.999782] usb 1-1: failed to send control message: -71
[73780.000057] usb 1-1: failed to send control message: -71
[73780.000231] usb 1-1: failed to send control message: -71
[73780.000392] usb 1-1: failed to send control message: -71
[73823.011081] usb 1-1: failed to send control message: -71
[73823.011292] usb 1-1: failed to send control message: -71
[73823.560717] usb 1-1: failed to send control message: -71
[73849.144209] usb 1-1: failed to send control message: -71
[73849.144482] usb 1-1: failed to send control message: -71
[73849.144756] usb 1-1: failed to send control message: -71
[73849.650180] usb 1-1: failed to send control message: -71
[73849.650371] usb 1-1: failed to send control message: -71
[74013.181526] usb 1-1: failed to send control message: -71
[74020.958927] usb 1-1: failed to send control message: -71
[74020.959250] usb 1-1: failed to send control message: -71
[74020.959525] usb 1-1: failed to send control message: -71
[74024.882368] usb 1-1: failed to send control message: -71
[74024.882793] usb 1-1: failed to send control message: -71
[74024.882993] usb 1-1: failed to send control message: -71
[74024.883192] usb 1-1: failed to send control message: -71
[74026.825241] usb 1-1: failed to send control message: -71
[74027.380928] usb 1-1: failed to send control message: -71
[74027.381124] usb 1-1: failed to send control message: -71
[74027.381244] usb 1-1: failed to send control message: -71
[74027.381404] usb 1-1: failed to send control message: -71
[74029.678728] usb 1-1: failed to send control message: -71
[74030.531720] usb 1-1: failed to send control message: -71
[74030.531956] usb 1-1: failed to send control message: -71
[74030.532115] usb 1-1: failed to send control message: -71
[74030.532274] usb 1-1: failed to send control message: -71
[74032.401867] usb 1-1: failed to send control message: -71
[74032.402106] usb 1-1: failed to send control message: -71
[74032.402523] usb 1-1: failed to send control message: -71
[74032.402918] usb 1-1: failed to send control message: -71
[74033.962758] usb 1-1: failed to send control message: -71
[74034.603948] usb 1-1: failed to send control message: -71
[74034.604178] usb 1-1: failed to send control message: -71
[74034.604423] usb 1-1: failed to send control message: -71
[74034.604632] usb 1-1: failed to send control message: -71
[74036.489204] usb 1-1: failed to send control message: -71
[74084.121510] usb 1-1: failed to send control message: -71
[74084.489314] usb 1-1: failed to send control message: -71
[74084.489694] usb 1-1: failed to send control message: -71
[74084.489846] usb 1-1: failed to send control message: -71
[74084.490005] usb 1-1: failed to send control message: -71
[74092.679564] usb 1-1: USB disconnect, device number 28
[74092.679835] usb 1-1: failed to send control message: -19
[74092.680024] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[74092.680053] ch341 1-1:1.0: device disconnected
[74094.552871] usb 1-3: new full-speed USB device number 29 using xhci_hcd
[74094.701698] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[74094.701704] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[74094.701707] usb 1-3: Product: USB2.0-Ser!
[74094.704266] ch341 1-3:1.0: ch341-uart converter detected
[74094.704818] usb 1-3: ch341-uart converter now attached to ttyUSB0
[74111.292457] usb 1-3: failed to send control message: -71
[74361.036803] usb 1-3: failed to send control message: -71
[74361.036961] usb 1-3: failed to send control message: -71
[74477.552944] usb 1-3: failed to send control message: -71
[74539.002444] usb 1-3: failed to send control message: -71
[74539.002667] usb 1-3: failed to send control message: -71
[74539.003099] usb 1-3: failed to send control message: -71
[74539.581759] usb 1-3: failed to send control message: -71
[74549.031267] usb 1-3: failed to send control message: -71
[74549.032744] usb 1-3: failed to send control message: -71
[74549.563044] usb 1-3: failed to send control message: -71
[74549.564531] usb 1-3: failed to send control message: -71
[74703.897496] usb 1-3: failed to send control message: -71
[74730.968554] usb 1-3: failed to send control message: -71
[74749.150405] usb 1-3: failed to send control message: -71
[74856.183788] usb 1-3: failed to send control message: -71
[74862.499728] usb 1-3: USB disconnect, device number 29
[74862.499938] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[74862.500090] ch341 1-3:1.0: device disconnected
[74863.895942] usb 1-1: new full-speed USB device number 30 using xhci_hcd
[74864.044442] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[74864.044445] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[74864.044448] usb 1-1: Product: USB2.0-Ser!
[74864.045478] ch341 1-1:1.0: ch341-uart converter detected
[74864.045888] usb 1-1: ch341-uart converter now attached to ttyUSB0
[74876.981368] usb 1-1: USB disconnect, device number 30
[74876.981619] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[74876.981645] ch341 1-1:1.0: device disconnected
[74879.879726] usb 1-1: new full-speed USB device number 31 using xhci_hcd
[74880.028215] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[74880.028217] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[74880.028219] usb 1-1: Product: USB2.0-Ser!
[74880.029187] ch341 1-1:1.0: ch341-uart converter detected
[74880.029547] usb 1-1: ch341-uart converter now attached to ttyUSB0
[74890.877523] usb 1-1: failed to send control message: -71
[74890.877832] usb 1-1: failed to send control message: -71
[74890.878054] usb 1-1: failed to send control message: -71
[75071.626792] usb 1-1: failed to send control message: -71
[75071.626985] usb 1-1: failed to send control message: -71
[75071.627185] usb 1-1: failed to send control message: -71
[75071.627345] usb 1-1: failed to send control message: -71
[75071.627647] usb 1-1: failed to send control message: -71
[75089.008273] usb 1-1: failed to send control message: -71
[75089.008554] usb 1-1: failed to send control message: -71
[75089.008778] usb 1-1: failed to send control message: -71
[75089.008977] usb 1-1: failed to send control message: -71
[75165.526783] usb 1-1: failed to send control message: -71
[75165.822838] usb 1-1: failed to send control message: -71
[75166.044987] usb 1-1: failed to send control message: -71
[75166.045185] usb 1-1: failed to send control message: -71
[75166.045393] usb 1-1: failed to send control message: -71
[75170.938445] usb 1-1: failed to send control message: -71
[75179.071018] usb 1-1: failed to send control message: -71
[75179.352765] usb 1-1: failed to send control message: -71
[75179.589923] usb 1-1: failed to send control message: -71
[75179.590201] usb 1-1: failed to send control message: -71
[75179.590359] usb 1-1: failed to send control message: -71
[75227.322763] usb 1-1: failed to send control message: -71
[75227.323033] usb 1-1: failed to send control message: -71
[75227.323317] usb 1-1: failed to send control message: -71
[75227.323535] usb 1-1: failed to send control message: -71
[75270.369355] usb 1-1: failed to send control message: -71
[75286.349168] usb 1-1: failed to send control message: -71
[75286.349355] usb 1-1: failed to send control message: -71
[75286.349471] usb 1-1: failed to send control message: -71
[75286.717429] usb 1-1: failed to send control message: -71
[75286.717669] usb 1-1: failed to send control message: -71
[75289.605847] usb 1-1: USB disconnect, device number 31
[75289.606022] usb 1-1: failed to send control message: -19
[75289.606132] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[75289.606151] ch341 1-1:1.0: device disconnected
[75291.371155] usb 1-3: new full-speed USB device number 32 using xhci_hcd
[75291.519801] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[75291.519807] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[75291.519810] usb 1-3: Product: USB2.0-Ser!
[75291.521861] ch341 1-3:1.0: ch341-uart converter detected
[75291.522444] usb 1-3: ch341-uart converter now attached to ttyUSB0
[75321.979709] usb 1-3: failed to send control message: -71
[75340.025471] usb 1-3: failed to send control message: -71
[75420.792177] usb 1-3: failed to send control message: -71
[75454.563951] usb 1-3: failed to send control message: -71
[75454.564918] usb 1-3: failed to send control message: -71
[75455.085746] usb 1-3: failed to send control message: -71
[75455.086033] usb 1-3: failed to send control message: -71
[75473.416513] usb 1-3: failed to send control message: -71
[75473.417138] usb 1-3: failed to send control message: -71
[75479.575571] usb 1-3: USB disconnect, device number 32
[75479.575828] usb 1-3: failed to send control message: -19
[75479.576089] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[75479.576136] ch341 1-3:1.0: device disconnected
[75484.765311] usb 1-3: new full-speed USB device number 33 using xhci_hcd
[75484.914168] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[75484.914174] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[75484.914178] usb 1-3: Product: USB2.0-Ser!
[75484.915793] ch341 1-3:1.0: ch341-uart converter detected
[75484.916401] usb 1-3: ch341-uart converter now attached to ttyUSB0
[75502.053316] usb 1-3: failed to send control message: -71
[75502.053560] usb 1-3: failed to send control message: -71
[75602.814358] usb 1-3: failed to send control message: -71
[75621.485938] usb 1-3: failed to send control message: -71
[75621.486221] usb 1-3: failed to send control message: -71
[75730.604132] usb 1-3: failed to send control message: -71
[75885.630322] usb 1-3: failed to send control message: -71
[75963.837433] usb 1-3: failed to send control message: -71
[75964.291985] usb 1-3: failed to send control message: -71
[76060.951490] usb 1-3: failed to send control message: -71
[76132.699611] usb 1-3: failed to send control message: -71
[76195.766551] usb 1-3: failed to send control message: -71
[76196.091840] usb 1-3: failed to send control message: -71
[76214.299527] usb 1-3: failed to send control message: -71
[76214.299760] usb 1-3: failed to send control message: -71
[76379.147740] usb 1-3: failed to send control message: -71
[76379.147995] usb 1-3: failed to send control message: -71
[76379.148133] usb 1-3: failed to send control message: -71
[76379.650342] usb 1-3: failed to send control message: -71
[76379.650533] usb 1-3: failed to send control message: -71
[76379.650748] usb 1-3: failed to send control message: -71
[76389.772765] usb 1-3: failed to send control message: -71
[76389.928749] ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
[76397.491445] usb 1-3: failed to send control message: -71
[76534.228007] usb 1-3: failed to send control message: -71
[76607.682347] usb 1-3: failed to send control message: -71
[76607.682540] usb 1-3: failed to send control message: -71
[76607.683233] usb 1-3: failed to send control message: -71
[76607.683877] usb 1-3: failed to send control message: -71
[76608.120248] usb 1-3: failed to send control message: -71
[76608.350393] usb 1-3: failed to send control message: -71
[76624.994536] usb 1-3: failed to send control message: -71
[76624.994867] usb 1-3: failed to send control message: -71
[76636.217762] usb 1-3: failed to send control message: -71
[76636.217970] usb 1-3: failed to send control message: -71
[76636.734733] usb 1-3: failed to send control message: -71
[76639.404738] usb 1-3: USB disconnect, device number 33
[76639.404927] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[76639.405090] ch341 1-3:1.0: device disconnected
[76641.692679] usb 1-1: new full-speed USB device number 34 using xhci_hcd
[76641.841309] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[76641.841312] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[76641.841314] usb 1-1: Product: USB2.0-Ser!
[76641.842360] ch341 1-1:1.0: ch341-uart converter detected
[76641.842775] usb 1-1: ch341-uart converter now attached to ttyUSB0
[76655.436826] usb 1-1: failed to send control message: -71
[76655.437051] usb 1-1: failed to send control message: -71
[76655.437208] usb 1-1: failed to send control message: -71
[76655.437372] usb 1-1: failed to send control message: -71
[76749.044751] usb 1-1: failed to send control message: -71
[76749.392406] usb 1-1: failed to send control message: -71
[76762.755803] usb 1-1: failed to send control message: -71
[76762.756013] usb 1-1: failed to send control message: -71
[76763.280184] usb 1-1: failed to send control message: -71
[76763.280624] usb 1-1: failed to send control message: -71
[76777.295202] usb 1-1: failed to send control message: -71
[76868.194651] usb 1-1: failed to send control message: -71
[76922.435530] usb 1-1: failed to send control message: -71
[76922.435811] usb 1-1: failed to send control message: -71
[77756.339057] usb 1-1: failed to send control message: -71
[77756.339488] usb 1-1: failed to send control message: -71
[77756.339682] usb 1-1: failed to send control message: -71
[77756.340002] usb 1-1: failed to send control message: -71
[77855.340217] usb 1-1: failed to send control message: -71
[77863.106665] usb 1-1: failed to send control message: -71
[77863.106979] usb 1-1: failed to send control message: -71
[77863.107197] usb 1-1: failed to send control message: -71
[78094.288395] usb 1-1: failed to send control message: -71
[78094.295989] usb 1-1: failed to send control message: -71
[78139.525333] usb 1-1: failed to send control message: -71
[78139.525527] usb 1-1: failed to send control message: -71
[78153.293645] usb 1-1: failed to send control message: -71
[78153.293885] usb 1-1: failed to send control message: -71
[78153.294053] usb 1-1: failed to send control message: -71
[78153.785495] usb 1-1: failed to send control message: -71
[78153.785959] usb 1-1: failed to send control message: -71
[78178.221827] usb 1-1: failed to send control message: -71
[79239.405330] usb 1-1: failed to send control message: -71
[79264.996947] usb 1-1: failed to send control message: -71
[79264.997146] usb 1-1: failed to send control message: -71
[79324.136880] usb 1-1: failed to send control message: -71
[79487.622889] usb 1-1: failed to send control message: -71
[79487.623569] usb 1-1: failed to send control message: -71
[79487.625098] usb 1-1: failed to send control message: -71
[79487.909188] usb 1-1: failed to send control message: -71
[79488.136689] usb 1-1: failed to send control message: -71
[79488.137277] usb 1-1: failed to send control message: -71
[79489.649334] usb 1-1: failed to send control message: -71
[79497.602375] usb 1-1: failed to send control message: -71
[79497.869976] usb 1-1: failed to send control message: -71
[79498.091426] usb 1-1: failed to send control message: -71
[79498.091617] usb 1-1: failed to send control message: -71
[79498.091966] usb 1-1: failed to send control message: -71
[79525.455061] usb 1-1: failed to send control message: -71
[79544.905855] wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[79545.435947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[79545.441836] ata2.00: configured for UDMA/133
[79545.751840] usb 1-1: USB disconnect, device number 34
[79545.752097] usb 1-1: failed to send control message: -19
[79545.752252] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[79545.752289] ch341 1-1:1.0: device disconnected
[79549.932022] PM: suspend entry (deep)
[79549.961406] Filesystems sync: 0.029 seconds
[79549.966934] Freezing user space processes ... (elapsed 0.004 seconds) done.
[79549.971345] OOM killer disabled.
[79549.971345] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[79549.972926] printk: Suspending console(s) (use no_console_suspend to debug)
[79550.091934] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[79550.095342] sd 0:0:0:0: [sda] Stopping disk
[79550.148952] ACPI: EC: interrupt blocked
[79550.188665] ACPI: Preparing to enter system sleep state S3
[79550.199597] ACPI: EC: event blocked
[79550.199598] ACPI: EC: EC stopped
[79550.199600] PM: Saving platform NVS memory
[79550.199918] Disabling non-boot CPUs ...
[79550.200756] IRQ 50: no longer affine to CPU1
[79550.201778] smpboot: CPU 1 is now offline
[79550.205929] smpboot: CPU 2 is now offline
[79550.207679] IRQ 19: no longer affine to CPU3
[79550.207683] IRQ 42: no longer affine to CPU3
[79550.207686] IRQ 43: no longer affine to CPU3
[79550.207688] IRQ 44: no longer affine to CPU3
[79550.208708] smpboot: CPU 3 is now offline
[79550.211801] ACPI: Low-level resume complete
[79550.211866] ACPI: EC: EC started
[79550.211869] PM: Restoring platform NVS memory
[79550.222136] Enabling non-boot CPUs ...
[79550.222308] x86: Booting SMP configuration:
[79550.222313] smpboot: Booting Node 0 Processor 1 APIC 0x2
[79550.232297] CPU1 is up
[79550.232426] smpboot: Booting Node 0 Processor 2 APIC 0x1
[79550.235694] CPU2 is up
[79550.235798] smpboot: Booting Node 0 Processor 3 APIC 0x3
[79550.238644] CPU3 is up
[79550.243728] ACPI: Waking up from system sleep state S3
[79550.344624] ACPI: EC: interrupt unblocked
[79550.407514] ACPI: EC: event unblocked
[79550.409067] usb usb1: root hub lost power or was reset
[79550.409074] usb usb2: root hub lost power or was reset
[79550.412751] sd 0:0:0:0: [sda] Starting disk
[79550.412983] rtlwifi: rtlwifi: wireless switch is on
[79550.726601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[79550.726644] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[79550.735602] ata2.00: configured for UDMA/133
[79550.830795] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[79550.832817] ata1.00: configured for UDMA/133
[79550.842925] ahci 0000:00:1f.2: port does not support device sleep
[79550.850547] ata1.00: Enabling discard_zeroes_data
[79551.106562] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[79551.280803] OOM killer enabled.
[79551.280805] Restarting tasks ... done.
[79551.324886] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[79551.327661] Bluetooth: hci0: RTL: rom_version status=0 version=1
[79551.327665] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[79551.327687] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[79551.327926] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[79551.327943] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[79551.348166] PM: suspend exit
[79551.633374] RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
[79551.791362] r8169 0000:02:00.2 enp2s0f2: Link is Down
[79552.141860] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[79554.058320] wlp3s0: authenticate with 9c:80:df:0b:6f:e8
[79554.068498] wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
[79554.069880] wlp3s0: authenticated
[79554.070334] wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
[79554.072596] wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
[79554.072855] wlp3s0: associated
[79554.080859] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79566.230237] usb 1-1: new full-speed USB device number 35 using xhci_hcd
[79566.383384] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[79566.383390] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[79566.383393] usb 1-1: Product: USB2.0-Ser!
[79566.384758] ch341 1-1:1.0: ch341-uart converter detected
[79566.386051] usb 1-1: ch341-uart converter now attached to ttyUSB0
[79597.077048] usb 1-1: failed to send control message: -71
[79603.558681] usb 1-1: USB disconnect, device number 35
[79603.558940] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
[79603.558976] ch341 1-1:1.0: device disconnected
[79605.057834] usb 1-3: new full-speed USB device number 36 using xhci_hcd
[79605.206351] usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[79605.206355] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[79605.206357] usb 1-3: Product: USB2.0-Ser!
[79605.207378] ch341 1-3:1.0: ch341-uart converter detected
[79605.207780] usb 1-3: ch341-uart converter now attached to ttyUSB0
shorty@cfd:~$

Man sieht eigentlich sehr deutlich, dass ziemlich oft die Error 71 vorliegen. Anbe noch die Ausgabe von journalctr -k: 

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
-- Logs begin at Fri 2020-08-21 21:55:47 CEST, end at Wed 2022-04-20 00:02:47 CEST. --
Apr 17 08:50:25 cfd kernel: microcode: microcode updated early to revision 0x2f, date = 2019-11-12
Apr 17 08:50:25 cfd kernel: Linux version 5.4.0-107-generic (buildd@lcy02-amd64-058) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #121-Ubuntu SMP Thu Mar 24 16:04:27 UTC 2022 (Ubuntu 5.4.0-107.121-generic 5.4.174)
Apr 17 08:50:25 cfd kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-107-generic root=UUID=95ad269f-769a-475e-b08b-46d7bfd4d907 ro quiet splash vt.handoff=7
Apr 17 08:50:25 cfd kernel: KERNEL supported cpus:
Apr 17 08:50:25 cfd kernel:   Intel GenuineIntel
Apr 17 08:50:25 cfd kernel:   AMD AuthenticAMD
Apr 17 08:50:25 cfd kernel:   Hygon HygonGenuine
Apr 17 08:50:25 cfd kernel:   Centaur CentaurHauls
Apr 17 08:50:25 cfd kernel:   zhaoxin   Shanghai  
Apr 17 08:50:25 cfd kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Apr 17 08:50:25 cfd kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Apr 17 08:50:25 cfd kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Apr 17 08:50:25 cfd kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Apr 17 08:50:25 cfd kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Apr 17 08:50:25 cfd kernel: BIOS-provided physical RAM map:
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x0000000000100000-0x000000009f98bfff] usable
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x000000009f98c000-0x000000009fe6cfff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x000000009fe6d000-0x00000000a2a94fff] usable
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000a2a95000-0x00000000a2af5fff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000a2af6000-0x00000000a3015fff] usable
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000a3016000-0x00000000a4457fff] ACPI NVS
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000a4458000-0x00000000a4ffdfff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000a4ffe000-0x00000000a4ffefff] usable
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Apr 17 08:50:25 cfd kernel: BIOS-e820: [mem 0x0000000100000000-0x0000000256ffffff] usable
Apr 17 08:50:25 cfd kernel: NX (Execute Disable) protection: active
Apr 17 08:50:25 cfd kernel: e820: update [mem 0x9e667018-0x9e677057] usable ==> usable
Apr 17 08:50:25 cfd kernel: e820: update [mem 0x9e667018-0x9e677057] usable ==> usable
Apr 17 08:50:25 cfd kernel: e820: update [mem 0x9e65a018-0x9e666857] usable ==> usable
Apr 17 08:50:25 cfd kernel: e820: update [mem 0x9e65a018-0x9e666857] usable ==> usable
Apr 17 08:50:25 cfd kernel: extended physical RAM map:
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x0000000000100000-0x000000009e65a017] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000009e65a018-0x000000009e666857] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000009e666858-0x000000009e667017] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000009e667018-0x000000009e677057] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000009e677058-0x000000009f98bfff] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000009f98c000-0x000000009fe6cfff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x000000009fe6d000-0x00000000a2a94fff] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000a2a95000-0x00000000a2af5fff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000a2af6000-0x00000000a3015fff] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000a3016000-0x00000000a4457fff] ACPI NVS
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000a4458000-0x00000000a4ffdfff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000a4ffe000-0x00000000a4ffefff] usable
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Apr 17 08:50:25 cfd kernel: reserve setup_data: [mem 0x0000000100000000-0x0000000256ffffff] usable
Apr 17 08:50:25 cfd kernel: efi: EFI v2.40 by American Megatrends
Apr 17 08:50:25 cfd kernel: efi:  ESRT=0xa4e24d18  ACPI=0xa375c000  ACPI 2.0=0xa375c000  SMBIOS=0xf05b0  SMBIOS 3.0=0xa47c0000  MPS=0xfd780  MOKvar=0xa0ea1000  TPMEventLog=0x9fe79018 
Apr 17 08:50:25 cfd kernel: TPM Final Events table not present
Apr 17 08:50:25 cfd kernel: secureboot: Secure boot disabled
Apr 17 08:50:25 cfd kernel: SMBIOS 3.0.0 present.
Apr 17 08:50:25 cfd kernel: DMI: ASUSTeK COMPUTER INC. X540LA/X540LA, BIOS X540LA.204 03/14/2016
Apr 17 08:50:25 cfd kernel: tsc: Fast TSC calibration using PIT
Apr 17 08:50:25 cfd kernel: tsc: Detected 1995.352 MHz processor
Apr 17 08:50:25 cfd kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Apr 17 08:50:25 cfd kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Apr 17 08:50:25 cfd kernel: last_pfn = 0x257000 max_arch_pfn = 0x400000000
Apr 17 08:50:25 cfd kernel: MTRR default type: uncachable
Apr 17 08:50:25 cfd kernel: MTRR fixed ranges enabled:
Apr 17 08:50:25 cfd kernel:   00000-9FFFF write-back
Apr 17 08:50:25 cfd kernel:   A0000-BFFFF uncachable
Apr 17 08:50:25 cfd kernel:   C0000-FFFFF write-protect
Apr 17 08:50:25 cfd kernel: MTRR variable ranges enabled:
Apr 17 08:50:25 cfd kernel:   0 base 0000000000 mask 7F80000000 write-back
Apr 17 08:50:25 cfd kernel:   1 base 0080000000 mask 7FE0000000 write-back
Apr 17 08:50:25 cfd kernel:   2 base 00A0000000 mask 7FFC000000 write-back
Apr 17 08:50:25 cfd kernel:   3 base 00A4000000 mask 7FFF000000 write-back
Apr 17 08:50:25 cfd kernel:   4 base 0100000000 mask 7F00000000 write-back
Apr 17 08:50:25 cfd kernel:   5 base 0200000000 mask 7FC0000000 write-back
Apr 17 08:50:25 cfd kernel:   6 base 0240000000 mask 7FF0000000 write-back
Apr 17 08:50:25 cfd kernel:   7 base 0250000000 mask 7FFC000000 write-back
Apr 17 08:50:25 cfd kernel:   8 base 0254000000 mask 7FFE000000 write-back
Apr 17 08:50:25 cfd kernel:   9 base 0256000000 mask 7FFF000000 write-back
Apr 17 08:50:25 cfd kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
Apr 17 08:50:25 cfd kernel: e820: update [mem 0xa5000000-0xffffffff] usable ==> reserved
Apr 17 08:50:25 cfd kernel: last_pfn = 0xa4fff max_arch_pfn = 0x400000000
Apr 17 08:50:25 cfd kernel: found SMP MP-table at [mem 0x000fd980-0x000fd98f]
Apr 17 08:50:25 cfd kernel: esrt: Reserving ESRT space from 0x00000000a4e24d18 to 0x00000000a4e24d50.
Apr 17 08:50:25 cfd kernel: e820: update [mem 0xa0ea1000-0xa0ea1fff] usable ==> reserved
Apr 17 08:50:25 cfd kernel: check: Scanning 1 areas for low memory corruption
Apr 17 08:50:25 cfd kernel: Using GB pages for direct mapping
Apr 17 08:50:25 cfd kernel: secureboot: Secure boot disabled
Apr 17 08:50:25 cfd kernel: RAMDISK: [mem 0x3ce56000-0x3fffdfff]
Apr 17 08:50:25 cfd kernel: ACPI: Early table checksum verification disabled
Apr 17 08:50:25 cfd kernel: ACPI: RSDP 0x00000000A375C000 000024 (v02 _ASUS_)
Apr 17 08:50:25 cfd kernel: ACPI: XSDT 0x00000000A375C0B0 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
Apr 17 08:50:25 cfd kernel: ACPI: FACP 0x00000000A3777B80 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
Apr 17 08:50:25 cfd kernel: ACPI: DSDT 0x00000000A375C218 01B968 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: FACS 0x00000000A4455F80 000040
Apr 17 08:50:25 cfd kernel: ACPI: APIC 0x00000000A3777C90 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
Apr 17 08:50:25 cfd kernel: ACPI: FPDT 0x00000000A3777D18 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
Apr 17 08:50:25 cfd kernel: ACPI: FIDT 0x00000000A3777D60 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
Apr 17 08:50:25 cfd kernel: ACPI: ECDT 0x00000000A3777E00 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000006)
Apr 17 08:50:25 cfd kernel: ACPI: MCFG 0x00000000A3777EC8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
Apr 17 08:50:25 cfd kernel: ACPI: HPET 0x00000000A3777F08 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A3777F40 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: UEFI 0x00000000A3778258 000042 (v01                 00000000      00000000)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A37782A0 000194 (v01 Intel  zpodd    00001000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: LPIT 0x00000000A3778438 000094 (v01                 00000000      00000000)
Apr 17 08:50:25 cfd kernel: ACPI: ASF! 0x00000000A37784D0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A3778570 000539 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A3778AB0 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A3779628 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A377C870 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: PCCT 0x00000000A377CC08 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A377CC78 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0x00000000A377D740 006BDB (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: DMAR 0x00000000A3784320 0000A8 (v01 INTEL  BDW      00000001 INTL 00000001)
Apr 17 08:50:25 cfd kernel: ACPI: BGRT 0x00000000A37843C8 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
Apr 17 08:50:25 cfd kernel: ACPI: TPM2 0x00000000A3784400 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
Apr 17 08:50:25 cfd kernel: ACPI: Reserving FACP table memory at [mem 0xa3777b80-0xa3777c8b]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving DSDT table memory at [mem 0xa375c218-0xa3777b7f]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving FACS table memory at [mem 0xa4455f80-0xa4455fbf]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving APIC table memory at [mem 0xa3777c90-0xa3777d13]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving FPDT table memory at [mem 0xa3777d18-0xa3777d5b]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving FIDT table memory at [mem 0xa3777d60-0xa3777dfb]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving ECDT table memory at [mem 0xa3777e00-0xa3777ec0]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving MCFG table memory at [mem 0xa3777ec8-0xa3777f03]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving HPET table memory at [mem 0xa3777f08-0xa3777f3f]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa3777f40-0xa3778254]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving UEFI table memory at [mem 0xa3778258-0xa3778299]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa37782a0-0xa3778433]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving LPIT table memory at [mem 0xa3778438-0xa37784cb]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving ASF! table memory at [mem 0xa37784d0-0xa377856f]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa3778570-0xa3778aa8]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa3778ab0-0xa3779623]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa3779628-0xa377c86c]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa377c870-0xa377cc03]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving PCCT table memory at [mem 0xa377cc08-0xa377cc75]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa377cc78-0xa377d73b]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving SSDT table memory at [mem 0xa377d740-0xa378431a]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving DMAR table memory at [mem 0xa3784320-0xa37843c7]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving BGRT table memory at [mem 0xa37843c8-0xa37843ff]
Apr 17 08:50:25 cfd kernel: ACPI: Reserving TPM2 table memory at [mem 0xa3784400-0xa3784433]
Apr 17 08:50:25 cfd kernel: ACPI: Local APIC address 0xfee00000
Apr 17 08:50:25 cfd kernel: No NUMA configuration found
Apr 17 08:50:25 cfd kernel: Faking a node at [mem 0x0000000000000000-0x0000000256ffffff]
Apr 17 08:50:25 cfd kernel: NODE_DATA(0) allocated [mem 0x256fd3000-0x256ffdfff]
Apr 17 08:50:25 cfd kernel: Zone ranges:
Apr 17 08:50:25 cfd kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Apr 17 08:50:25 cfd kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Apr 17 08:50:25 cfd kernel:   Normal   [mem 0x0000000100000000-0x0000000256ffffff]
Apr 17 08:50:25 cfd kernel:   Device   empty
Apr 17 08:50:25 cfd kernel: Movable zone start for each node
Apr 17 08:50:25 cfd kernel: Early memory node ranges
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x0000000000001000-0x0000000000057fff]
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x0000000000059000-0x000000000009efff]
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x0000000000100000-0x000000009f98bfff]
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x000000009fe6d000-0x00000000a2a94fff]
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x00000000a2af6000-0x00000000a3015fff]
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x00000000a4ffe000-0x00000000a4ffefff]
Apr 17 08:50:25 cfd kernel:   node   0: [mem 0x0000000100000000-0x0000000256ffffff]
Apr 17 08:50:25 cfd kernel: Zeroed struct page in unavailable ranges: 25998 pages
Apr 17 08:50:25 cfd kernel: Initmem setup node 0 [mem 0x0000000000001000-0x0000000256ffffff]
Apr 17 08:50:25 cfd kernel: On node 0 totalpages: 2071154
Apr 17 08:50:25 cfd kernel:   DMA zone: 64 pages used for memmap
Apr 17 08:50:25 cfd kernel:   DMA zone: 26 pages reserved
Apr 17 08:50:25 cfd kernel:   DMA zone: 3997 pages, LIFO batch:0
Apr 17 08:50:25 cfd kernel:   DMA32 zone: 10348 pages used for memmap
Apr 17 08:50:25 cfd kernel:   DMA32 zone: 662229 pages, LIFO batch:63
Apr 17 08:50:25 cfd kernel:   Normal zone: 21952 pages used for memmap
Apr 17 08:50:25 cfd kernel:   Normal zone: 1404928 pages, LIFO batch:63
Apr 17 08:50:25 cfd kernel: Reserving Intel graphics memory at [mem 0xa6000000-0xa7ffffff]
Apr 17 08:50:25 cfd kernel: ACPI: PM-Timer IO Port: 0x1808
Apr 17 08:50:25 cfd kernel: ACPI: Local APIC address 0xfee00000
Apr 17 08:50:25 cfd kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Apr 17 08:50:25 cfd kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Apr 17 08:50:25 cfd kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Apr 17 08:50:25 cfd kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Apr 17 08:50:25 cfd kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
Apr 17 08:50:25 cfd kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 17 08:50:25 cfd kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 17 08:50:25 cfd kernel: ACPI: IRQ0 used by override.
Apr 17 08:50:25 cfd kernel: ACPI: IRQ9 used by override.
Apr 17 08:50:25 cfd kernel: Using ACPI (MADT) for SMP configuration information
Apr 17 08:50:25 cfd kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Apr 17 08:50:25 cfd kernel: e820: update [mem 0xa143b000-0xa144efff] usable ==> reserved
Apr 17 08:50:25 cfd kernel: TSC deadline timer available
Apr 17 08:50:25 cfd kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x9e65a000-0x9e65afff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x9e666000-0x9e666fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x9e667000-0x9e667fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x9e677000-0x9e677fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0x9f98c000-0x9fe6cfff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa0ea1000-0xa0ea1fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa143b000-0xa144efff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa2a95000-0xa2af5fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa3016000-0xa4457fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa4458000-0xa4ffdfff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa4fff000-0xa57fffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa5800000-0xa7ffffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
Apr 17 08:50:25 cfd kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
Apr 17 08:50:25 cfd kernel: [mem 0xa8000000-0xf7ffffff] available for PCI devices
Apr 17 08:50:25 cfd kernel: Booting paravirtualized kernel on bare hardware
Apr 17 08:50:25 cfd kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Apr 17 08:50:25 cfd kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
Apr 17 08:50:25 cfd kernel: percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288
Apr 17 08:50:25 cfd kernel: pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152
Apr 17 08:50:25 cfd kernel: pcpu-alloc: [0] 0 1 2 3 
Apr 17 08:50:25 cfd kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2038764
Apr 17 08:50:25 cfd kernel: Policy zone: Normal
Apr 17 08:50:25 cfd kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-107-generic root=UUID=95ad269f-769a-475e-b08b-46d7bfd4d907 ro quiet splash vt.handoff=7
Apr 17 08:50:25 cfd kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Apr 17 08:50:25 cfd kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Apr 17 08:50:25 cfd kernel: mem auto-init: stack:off, heap alloc:on, heap free:off
Apr 17 08:50:25 cfd kernel: Calgary: detecting Calgary via BIOS EBDA area
Apr 17 08:50:25 cfd kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Apr 17 08:50:25 cfd kernel: Memory: 7928548K/8284616K available (14339K kernel code, 2401K rwdata, 9504K rodata, 2752K init, 4948K bss, 356068K reserved, 0K cma-reserved)
Apr 17 08:50:25 cfd kernel: random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
Apr 17 08:50:25 cfd kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Apr 17 08:50:25 cfd kernel: Kernel/User page tables isolation: enabled
Apr 17 08:50:25 cfd kernel: ftrace: allocating 44660 entries in 175 pages
Apr 17 08:50:25 cfd kernel: rcu: Hierarchical RCU implementation.
Apr 17 08:50:25 cfd kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Apr 17 08:50:25 cfd kernel:         Tasks RCU enabled.
Apr 17 08:50:25 cfd kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Apr 17 08:50:25 cfd kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Apr 17 08:50:25 cfd kernel: NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
Apr 17 08:50:25 cfd kernel: random: crng done (trusting CPU's manufacturer)
Apr 17 08:50:25 cfd kernel: vt handoff: transparent VT on vt#7
Apr 17 08:50:25 cfd kernel: Console: colour dummy device 80x25
Apr 17 08:50:25 cfd kernel: printk: console [tty0] enabled
Apr 17 08:50:25 cfd kernel: ACPI: Core revision 20190816
Apr 17 08:50:25 cfd kernel: hpet: HPET dysfunctional in PC10. Force disabled.
Apr 17 08:50:25 cfd kernel: APIC: Switch to symmetric I/O mode setup
Apr 17 08:50:25 cfd kernel: DMAR: Host address width 39
Apr 17 08:50:25 cfd kernel: DMAR: DRHD base: 0x000000fed90000 flags: 0x0
Apr 17 08:50:25 cfd kernel: DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
Apr 17 08:50:25 cfd kernel: DMAR: DRHD base: 0x000000fed91000 flags: 0x1
Apr 17 08:50:25 cfd kernel: DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
Apr 17 08:50:25 cfd kernel: DMAR: RMRR base: 0x000000a2af4000 end: 0x000000a2af4fff
Apr 17 08:50:25 cfd kernel: DMAR: RMRR base: 0x000000a5800000 end: 0x000000a7ffffff
Apr 17 08:50:25 cfd kernel: DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
Apr 17 08:50:25 cfd kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed91000
Apr 17 08:50:25 cfd kernel: DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
Apr 17 08:50:25 cfd kernel: DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
Apr 17 08:50:25 cfd kernel: DMAR-IR: Enabled IRQ remapping in xapic mode
Apr 17 08:50:25 cfd kernel: x2apic: IRQ remapping doesn't support X2APIC mode
Apr 17 08:50:25 cfd kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39860f04b45, max_idle_ns: 881590463687 ns
Apr 17 08:50:25 cfd kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.70 BogoMIPS (lpj=7981408)
Apr 17 08:50:25 cfd kernel: pid_max: default: 32768 minimum: 301
Apr 17 08:50:25 cfd kernel: LSM: Security Framework initializing
Apr 17 08:50:25 cfd kernel: Yama: becoming mindful.
Apr 17 08:50:25 cfd kernel: AppArmor: AppArmor initialized
Apr 17 08:50:25 cfd kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Apr 17 08:50:25 cfd kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Apr 17 08:50:25 cfd kernel: *** VALIDATE tmpfs ***
Apr 17 08:50:25 cfd kernel: *** VALIDATE proc ***
Apr 17 08:50:25 cfd kernel: *** VALIDATE cgroup1 ***
Apr 17 08:50:25 cfd kernel: *** VALIDATE cgroup2 ***
Apr 17 08:50:25 cfd kernel: mce: CPU0: Thermal monitoring enabled (TM1)
Apr 17 08:50:25 cfd kernel: process: using mwait in idle threads
Apr 17 08:50:25 cfd kernel: Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Apr 17 08:50:25 cfd kernel: Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Apr 17 08:50:25 cfd kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Apr 17 08:50:25 cfd kernel: Spectre V2 : Mitigation: Retpolines
Apr 17 08:50:25 cfd kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Apr 17 08:50:25 cfd kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
Apr 17 08:50:25 cfd kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Apr 17 08:50:25 cfd kernel: Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Apr 17 08:50:25 cfd kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Apr 17 08:50:25 cfd kernel: SRBDS: Mitigation: Microcode
Apr 17 08:50:25 cfd kernel: MDS: Mitigation: Clear CPU buffers
Apr 17 08:50:25 cfd kernel: Freeing SMP alternatives memory: 40K
Apr 17 08:50:25 cfd kernel: smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Apr 17 08:50:25 cfd kernel: Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
Apr 17 08:50:25 cfd kernel: ... version:                3
Apr 17 08:50:25 cfd kernel: ... bit width:              48
Apr 17 08:50:25 cfd kernel: ... generic registers:      4
Apr 17 08:50:25 cfd kernel: ... value mask:             0000ffffffffffff
Apr 17 08:50:25 cfd kernel: ... max period:             00007fffffffffff
Apr 17 08:50:25 cfd kernel: ... fixed-purpose events:   3
Apr 17 08:50:25 cfd kernel: ... event mask:             000000070000000f
Apr 17 08:50:25 cfd kernel: rcu: Hierarchical SRCU implementation.
Apr 17 08:50:25 cfd kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Apr 17 08:50:25 cfd kernel: smp: Bringing up secondary CPUs ...
Apr 17 08:50:25 cfd kernel: x86: Booting SMP configuration:
Apr 17 08:50:25 cfd kernel: .... node  #0, CPUs:      #1 #2
Apr 17 08:50:25 cfd kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
Apr 17 08:50:25 cfd kernel:  #3
Apr 17 08:50:25 cfd kernel: smp: Brought up 1 node, 4 CPUs
Apr 17 08:50:25 cfd kernel: smpboot: Max logical packages: 1
Apr 17 08:50:25 cfd kernel: smpboot: Total of 4 processors activated (15962.81 BogoMIPS)
Apr 17 08:50:25 cfd kernel: devtmpfs: initialized
Apr 17 08:50:25 cfd kernel: x86/mm: Memory block size: 128MB
Apr 17 08:50:25 cfd kernel: PM: Registering ACPI NVS region [mem 0xa3016000-0xa4457fff] (21241856 bytes)
Apr 17 08:50:25 cfd kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Apr 17 08:50:25 cfd kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Apr 17 08:50:25 cfd kernel: pinctrl core: initialized pinctrl subsystem
Apr 17 08:50:25 cfd kernel: PM: RTC time: 06:50:22, date: 2022-04-17
Apr 17 08:50:25 cfd kernel: NET: Registered protocol family 16
Apr 17 08:50:25 cfd kernel: audit: initializing netlink subsys (disabled)
Apr 17 08:50:25 cfd kernel: audit: type=2000 audit(1650178222.008:1): state=initialized audit_enabled=0 res=1
Apr 17 08:50:25 cfd kernel: EISA bus registered
Apr 17 08:50:25 cfd kernel: cpuidle: using governor ladder
Apr 17 08:50:25 cfd kernel: cpuidle: using governor menu
Apr 17 08:50:25 cfd kernel: Detected 1 PCC Subspaces
Apr 17 08:50:25 cfd kernel: Registering PCC driver as Mailbox controller
Apr 17 08:50:25 cfd kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Apr 17 08:50:25 cfd kernel: ACPI: bus type PCI registered
Apr 17 08:50:25 cfd kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Apr 17 08:50:25 cfd kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Apr 17 08:50:25 cfd kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Apr 17 08:50:25 cfd kernel: PCI: Using configuration type 1 for base access
Apr 17 08:50:25 cfd kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Apr 17 08:50:25 cfd kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Apr 17 08:50:25 cfd kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(Module Device)
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(Processor Device)
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(Processor Aggregator Device)
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(Linux-Dell-Video)
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
Apr 17 08:50:25 cfd kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
Apr 17 08:50:25 cfd kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
Apr 17 08:50:25 cfd kernel: ACPI: EC: EC started
Apr 17 08:50:25 cfd kernel: ACPI: EC: interrupt blocked
Apr 17 08:50:25 cfd kernel: ACPI: \: Used as first EC
Apr 17 08:50:25 cfd kernel: ACPI: \: GPE=0xa, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Apr 17 08:50:25 cfd kernel: ACPI: EC: Boot ECDT EC used to handle transactions
Apr 17 08:50:25 cfd kernel: ACPI: Dynamic OEM Table Load:
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0xFFFF9B624CE50400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: Dynamic OEM Table Load:
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0xFFFF9B624D2F8000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: Dynamic OEM Table Load:
Apr 17 08:50:25 cfd kernel: ACPI: SSDT 0xFFFF9B624CE1E000 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
Apr 17 08:50:25 cfd kernel: ACPI: Interpreter enabled
Apr 17 08:50:25 cfd kernel: ACPI: (supports S0 S3 S4 S5)
Apr 17 08:50:25 cfd kernel: ACPI: Using IOAPIC for interrupt routing
Apr 17 08:50:25 cfd kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Apr 17 08:50:25 cfd kernel: ACPI: Enabled 8 GPEs in block 00 to 7F
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [PG00] (on)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [PG01] (on)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [PG02] (on)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: Power Resource [WRST] (off)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Apr 17 08:50:25 cfd kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
Apr 17 08:50:25 cfd kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
Apr 17 08:50:25 cfd kernel: acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Apr 17 08:50:25 cfd kernel: PCI host bridge to bus 0000:00
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
Apr 17 08:50:25 cfd kernel: pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: BAR 2: assigned to efifb
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
Apr 17 08:50:25 cfd kernel: pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
Apr 17 08:50:25 cfd kernel: pci 0000:00:03.0: reg 0x10: [mem 0xaa21c000-0xaa21ffff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
Apr 17 08:50:25 cfd kernel: pci 0000:00:04.0: reg 0x10: [mem 0xaa210000-0xaa217fff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
Apr 17 08:50:25 cfd kernel: pci 0000:00:14.0: reg 0x10: [mem 0xaa200000-0xaa20ffff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
Apr 17 08:50:25 cfd kernel: pci 0000:00:16.0: reg 0x10: [mem 0xaa224000-0xaa22401f 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
Apr 17 08:50:25 cfd kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xaa218000-0xaa21bfff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: reg 0x10: [io  0x50b0-0x50b7]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: reg 0x14: [io  0x50a0-0x50a3]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: reg 0x18: [io  0x5090-0x5097]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: reg 0x1c: [io  0x5080-0x5083]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xaa222000-0xaa2227ff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.2: PME# supported from D3hot
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xaa221000-0xaa2210ff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
Apr 17 08:50:25 cfd kernel: pci 0000:00:1f.6: reg 0x10: [mem 0xaa220000-0xaa220fff 64bit]
Apr 17 08:50:25 cfd kernel: acpiphp: Slot [1] registered
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.0: [10ec:5286] type 00 class 0xff0000
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.0: reg 0x10: [mem 0xaa100000-0xaa10ffff]
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.0: supports D1 D2
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.2: [10ec:8136] type 00 class 0x020000
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.2: reg 0x10: [io  0x4000-0x40ff]
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.2: reg 0x18: [mem 0xaa110000-0xaa110fff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.2: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref]
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.2: supports D1 D2
Apr 17 08:50:25 cfd kernel: pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2: PCI bridge to [bus 02]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2:   bridge window [mem 0xaa100000-0xaa1fffff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
Apr 17 08:50:25 cfd kernel: pci 0000:03:00.0: [10ec:b723] type 00 class 0x028000
Apr 17 08:50:25 cfd kernel: pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
Apr 17 08:50:25 cfd kernel: pci 0000:03:00.0: reg 0x18: [mem 0xaa000000-0xaa003fff 64bit]
Apr 17 08:50:25 cfd kernel: pci 0000:03:00.0: supports D1 D2
Apr 17 08:50:25 cfd kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3: PCI bridge to [bus 03]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3:   bridge window [mem 0xaa000000-0xaa0fffff]
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 *14 15)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
Apr 17 08:50:25 cfd kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15)
Apr 17 08:50:25 cfd kernel: ACPI: EC: interrupt unblocked
Apr 17 08:50:25 cfd kernel: ACPI: EC: event unblocked
Apr 17 08:50:25 cfd kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Apr 17 08:50:25 cfd kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
Apr 17 08:50:25 cfd kernel: iommu: Default domain type: Translated 
Apr 17 08:50:25 cfd kernel: SCSI subsystem initialized
Apr 17 08:50:25 cfd kernel: libata version 3.00 loaded.
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: vgaarb: bridge control possible
Apr 17 08:50:25 cfd kernel: vgaarb: loaded
Apr 17 08:50:25 cfd kernel: ACPI: bus type USB registered
Apr 17 08:50:25 cfd kernel: usbcore: registered new interface driver usbfs
Apr 17 08:50:25 cfd kernel: usbcore: registered new interface driver hub
Apr 17 08:50:25 cfd kernel: usbcore: registered new device driver usb
Apr 17 08:50:25 cfd kernel: pps_core: LinuxPPS API ver. 1 registered
Apr 17 08:50:25 cfd kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Apr 17 08:50:25 cfd kernel: PTP clock support registered
Apr 17 08:50:25 cfd kernel: EDAC MC: Ver: 3.0.0
Apr 17 08:50:25 cfd kernel: Registered efivars operations
Apr 17 08:50:25 cfd kernel: PCI: Using ACPI for IRQ routing
Apr 17 08:50:25 cfd kernel: PCI: pci_cache_line_size set to 64 bytes
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0x9e65a018-0x9fffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0x9e667018-0x9fffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0x9f98c000-0x9fffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0xa0ea1000-0xa3ffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0xa143b000-0xa3ffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0xa2a95000-0xa3ffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0xa3016000-0xa3ffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0xa4fff000-0xa7ffffff]
Apr 17 08:50:25 cfd kernel: e820: reserve RAM buffer [mem 0x257000000-0x257ffffff]
Apr 17 08:50:25 cfd kernel: NetLabel: Initializing
Apr 17 08:50:25 cfd kernel: NetLabel:  domain hash size = 128
Apr 17 08:50:25 cfd kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Apr 17 08:50:25 cfd kernel: NetLabel:  unlabeled traffic allowed by default
Apr 17 08:50:25 cfd kernel: clocksource: Switched to clocksource tsc-early
Apr 17 08:50:25 cfd kernel: *** VALIDATE bpf ***
Apr 17 08:50:25 cfd kernel: VFS: Disk quotas dquot_6.6.0
Apr 17 08:50:25 cfd kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr 17 08:50:25 cfd kernel: *** VALIDATE ramfs ***
Apr 17 08:50:25 cfd kernel: *** VALIDATE hugetlbfs ***
Apr 17 08:50:25 cfd kernel: AppArmor: AppArmor Filesystem Enabled
Apr 17 08:50:25 cfd kernel: pnp: PnP ACPI init
Apr 17 08:50:25 cfd kernel: system 00:00: [io  0x0240-0x0259] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 17 08:50:25 cfd kernel: pnp 00:01: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
Apr 17 08:50:25 cfd kernel: system 00:02: [io  0x0680-0x069f] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:02: [io  0xffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:02: [io  0xffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:02: [io  0xffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:02: [io  0x1800-0x18fe] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:02: [io  0x164e-0x164f] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 17 08:50:25 cfd kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Apr 17 08:50:25 cfd kernel: system 00:04: [io  0x1854-0x1857] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xff000000-0xffffffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xa8010000-0xa801ffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: [mem 0xa8000000-0xa800ffff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 17 08:50:25 cfd kernel: system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
Apr 17 08:50:25 cfd kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 17 08:50:25 cfd kernel: pnp: PnP ACPI: found 7 devices
Apr 17 08:50:25 cfd kernel: thermal_sys: Registered thermal governor 'fair_share'
Apr 17 08:50:25 cfd kernel: thermal_sys: Registered thermal governor 'bang_bang'
Apr 17 08:50:25 cfd kernel: thermal_sys: Registered thermal governor 'step_wise'
Apr 17 08:50:25 cfd kernel: thermal_sys: Registered thermal governor 'user_space'
Apr 17 08:50:25 cfd kernel: thermal_sys: Registered thermal governor 'power_allocator'
Apr 17 08:50:25 cfd kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2: PCI bridge to [bus 02]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2:   bridge window [mem 0xaa100000-0xaa1fffff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3: PCI bridge to [bus 03]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
Apr 17 08:50:25 cfd kernel: pci 0000:00:1c.3:   bridge window [mem 0xaa000000-0xaa0fffff]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:02: resource 1 [mem 0xaa100000-0xaa1fffff]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
Apr 17 08:50:25 cfd kernel: pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaa0fffff]
Apr 17 08:50:25 cfd kernel: NET: Registered protocol family 2
Apr 17 08:50:25 cfd kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Apr 17 08:50:25 cfd kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
Apr 17 08:50:25 cfd kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
Apr 17 08:50:25 cfd kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
Apr 17 08:50:25 cfd kernel: TCP: Hash tables configured (established 65536 bind 65536)
Apr 17 08:50:25 cfd kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
Apr 17 08:50:25 cfd kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
Apr 17 08:50:25 cfd kernel: NET: Registered protocol family 1
Apr 17 08:50:25 cfd kernel: NET: Registered protocol family 44
Apr 17 08:50:25 cfd kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Apr 17 08:50:25 cfd kernel: PCI: CLS 0 bytes, default 64
Apr 17 08:50:25 cfd kernel: Trying to unpack rootfs image as initramfs...
Apr 17 08:50:25 cfd kernel: Freeing initrd memory: 50848K
Apr 17 08:50:25 cfd kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Apr 17 08:50:25 cfd kernel: software IO TLB: mapped [mem 0x9a65a000-0x9e65a000] (64MB)
Apr 17 08:50:25 cfd kernel: check: Scanning for low memory corruption every 60 seconds
Apr 17 08:50:25 cfd kernel: Initialise system trusted keyrings
Apr 17 08:50:25 cfd kernel: Key type blacklist registered
Apr 17 08:50:25 cfd kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
Apr 17 08:50:25 cfd kernel: zbud: loaded
Apr 17 08:50:25 cfd kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Apr 17 08:50:25 cfd kernel: fuse: init (API version 7.31)
Apr 17 08:50:25 cfd kernel: *** VALIDATE fuse ***
Apr 17 08:50:25 cfd kernel: *** VALIDATE fuse ***
Apr 17 08:50:25 cfd kernel: Platform Keyring initialized
Apr 17 08:50:25 cfd kernel: Key type asymmetric registered
Apr 17 08:50:25 cfd kernel: Asymmetric key parser 'x509' registered
Apr 17 08:50:25 cfd kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
Apr 17 08:50:25 cfd kernel: io scheduler mq-deadline registered
Apr 17 08:50:25 cfd kernel: pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
Apr 17 08:50:25 cfd kernel: pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
Apr 17 08:50:25 cfd kernel: pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
Apr 17 08:50:25 cfd kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Apr 17 08:50:25 cfd kernel: efifb: probing for efifb
Apr 17 08:50:25 cfd kernel: efifb: showing boot graphics
Apr 17 08:50:25 cfd kernel: efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
Apr 17 08:50:25 cfd kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
Apr 17 08:50:25 cfd kernel: efifb: scrolling: redraw
Apr 17 08:50:25 cfd kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Apr 17 08:50:25 cfd kernel: fbcon: Deferring console take-over
Apr 17 08:50:25 cfd kernel: fb0: EFI VGA frame buffer device
Apr 17 08:50:25 cfd kernel: intel_idle: MWAIT substates: 0x11142120
Apr 17 08:50:25 cfd kernel: intel_idle: v0.4.1 model 0x3D
Apr 17 08:50:25 cfd kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
Apr 17 08:50:25 cfd kernel: ACPI: AC Adapter [AC0] (off-line)
Apr 17 08:50:25 cfd kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Apr 17 08:50:25 cfd kernel: ACPI: Lid Switch [LID]
Apr 17 08:50:25 cfd kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Apr 17 08:50:25 cfd kernel: ACPI: Sleep Button [SLPB]
Apr 17 08:50:25 cfd kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Apr 17 08:50:25 cfd kernel: ACPI: Power Button [PWRF]
Apr 17 08:50:25 cfd kernel: thermal LNXTHERM:00: registered as thermal_zone0
Apr 17 08:50:25 cfd kernel: ACPI: Thermal Zone [THRM] (37 C)
Apr 17 08:50:25 cfd kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Apr 17 08:50:25 cfd kernel: hpet_acpi_add: no address or irqs in _CRS
Apr 17 08:50:25 cfd kernel: Linux agpgart interface v0.103
Apr 17 08:50:25 cfd kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xa4fff000-0xa4fff02f]
Apr 17 08:50:25 cfd kernel: tpm_crb: probe of MSFT0101:00 failed with error -16
Apr 17 08:50:25 cfd kernel: battery: ACPI: Battery Slot [BAT0] (battery present)
Apr 17 08:50:25 cfd kernel: loop: module loaded
Apr 17 08:50:25 cfd kernel: tun: Universal TUN/TAP device driver, 1.6
Apr 17 08:50:25 cfd kernel: PPP generic driver version 2.4.2
Apr 17 08:50:25 cfd kernel: VFIO - User Level meta-driver version: 0.3
Apr 17 08:50:25 cfd kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 17 08:50:25 cfd kernel: ehci-pci: EHCI PCI platform driver
Apr 17 08:50:25 cfd kernel: ehci-platform: EHCI generic platform driver
Apr 17 08:50:25 cfd kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apr 17 08:50:25 cfd kernel: ohci-pci: OHCI PCI platform driver
Apr 17 08:50:25 cfd kernel: ohci-platform: OHCI generic platform driver
Apr 17 08:50:25 cfd kernel: uhci_hcd: USB Universal Host Controller Interface driver
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Apr 17 08:50:25 cfd kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
Apr 17 08:50:25 cfd kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:50:25 cfd kernel: usb usb1: Product: xHCI Host Controller
Apr 17 08:50:25 cfd kernel: usb usb1: Manufacturer: Linux 5.4.0-107-generic xhci-hcd
Apr 17 08:50:25 cfd kernel: usb usb1: SerialNumber: 0000:00:14.0
Apr 17 08:50:25 cfd kernel: hub 1-0:1.0: USB hub found
Apr 17 08:50:25 cfd kernel: hub 1-0:1.0: 11 ports detected
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Apr 17 08:50:25 cfd kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
Apr 17 08:50:25 cfd kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
Apr 17 08:50:25 cfd kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:50:25 cfd kernel: usb usb2: Product: xHCI Host Controller
Apr 17 08:50:25 cfd kernel: usb usb2: Manufacturer: Linux 5.4.0-107-generic xhci-hcd
Apr 17 08:50:25 cfd kernel: usb usb2: SerialNumber: 0000:00:14.0
Apr 17 08:50:25 cfd kernel: hub 2-0:1.0: USB hub found
Apr 17 08:50:25 cfd kernel: hub 2-0:1.0: 4 ports detected
Apr 17 08:50:25 cfd kernel: usb: port power management may be unreliable
Apr 17 08:50:25 cfd kernel: i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
Apr 17 08:50:25 cfd kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Apr 17 08:50:25 cfd kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 17 08:50:25 cfd kernel: mousedev: PS/2 mouse device common for all mice
Apr 17 08:50:25 cfd kernel: rtc_cmos 00:03: RTC can wake from S4
Apr 17 08:50:25 cfd kernel: rtc_cmos 00:03: registered as rtc0
Apr 17 08:50:25 cfd kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
Apr 17 08:50:25 cfd kernel: i2c /dev entries driver
Apr 17 08:50:25 cfd kernel: device-mapper: uevent: version 1.0.3
Apr 17 08:50:25 cfd kernel: device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
Apr 17 08:50:25 cfd kernel: platform eisa.0: Probing EISA bus 0
Apr 17 08:50:25 cfd kernel: platform eisa.0: EISA: Cannot allocate resource for mainboard
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 1
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 2
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 3
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 4
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 5
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 6
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 7
Apr 17 08:50:25 cfd kernel: platform eisa.0: Cannot allocate resource for EISA slot 8
Apr 17 08:50:25 cfd kernel: platform eisa.0: EISA: Detected 0 cards
Apr 17 08:50:25 cfd kernel: intel_pstate: Intel P-state driver initializing
Apr 17 08:50:25 cfd kernel: ledtrig-cpu: registered to indicate activity on CPUs
Apr 17 08:50:25 cfd kernel: EFI Variables Facility v0.08 2004-May-17
Apr 17 08:50:25 cfd kernel: drop_monitor: Initializing network drop monitor service
Apr 17 08:50:25 cfd kernel: NET: Registered protocol family 10
Apr 17 08:50:25 cfd kernel: Segment Routing with IPv6
Apr 17 08:50:25 cfd kernel: NET: Registered protocol family 17
Apr 17 08:50:25 cfd kernel: Key type dns_resolver registered
Apr 17 08:50:25 cfd kernel: RAS: Correctable Errors collector initialized.
Apr 17 08:50:25 cfd kernel: microcode: sig=0x306d4, pf=0x40, revision=0x2f
Apr 17 08:50:25 cfd kernel: microcode: Microcode Update Driver: v2.2.
Apr 17 08:50:25 cfd kernel: IPI shorthand broadcast: enabled
Apr 17 08:50:25 cfd kernel: sched_clock: Marking stable (656659919, 1558212)->(667167688, -8949557)
Apr 17 08:50:25 cfd kernel: registered taskstats version 1
Apr 17 08:50:25 cfd kernel: Loading compiled-in X.509 certificates
Apr 17 08:50:25 cfd kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 713aaee4a1951813e84c4ce74b91269786d86c89'
Apr 17 08:50:25 cfd kernel: Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Apr 17 08:50:25 cfd kernel: Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
Apr 17 08:50:25 cfd kernel: blacklist: Loading compiled-in revocation X.509 certificates
Apr 17 08:50:25 cfd kernel: Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Apr 17 08:50:25 cfd kernel: zswap: loaded using pool lzo/zbud
Apr 17 08:50:25 cfd kernel: Key type ._fscrypt registered
Apr 17 08:50:25 cfd kernel: Key type .fscrypt registered
Apr 17 08:50:25 cfd kernel: Key type big_key registered
Apr 17 08:50:25 cfd kernel: Key type encrypted registered
Apr 17 08:50:25 cfd kernel: AppArmor: AppArmor sha1 policy hashing enabled
Apr 17 08:50:25 cfd kernel: integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
Apr 17 08:50:25 cfd kernel: integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
Apr 17 08:50:25 cfd kernel: ima: No TPM chip found, activating TPM-bypass!
Apr 17 08:50:25 cfd kernel: ima: Allocated hash algorithm: sha1
Apr 17 08:50:25 cfd kernel: ima: No architecture policies found
Apr 17 08:50:25 cfd kernel: evm: Initialising EVM extended attributes:
Apr 17 08:50:25 cfd kernel: evm: security.selinux
Apr 17 08:50:25 cfd kernel: evm: security.SMACK64
Apr 17 08:50:25 cfd kernel: evm: security.SMACK64EXEC
Apr 17 08:50:25 cfd kernel: evm: security.SMACK64TRANSMUTE
Apr 17 08:50:25 cfd kernel: evm: security.SMACK64MMAP
Apr 17 08:50:25 cfd kernel: evm: security.apparmor
Apr 17 08:50:25 cfd kernel: evm: security.ima
Apr 17 08:50:25 cfd kernel: evm: security.capability
Apr 17 08:50:25 cfd kernel: evm: HMAC attrs: 0x1
Apr 17 08:50:25 cfd kernel: PM:   Magic number: 2:686:822
Apr 17 08:50:25 cfd kernel: rtc_cmos 00:03: setting system clock to 2022-04-17T06:50:23 UTC (1650178223)
Apr 17 08:50:25 cfd kernel: Freeing unused decrypted memory: 2040K
Apr 17 08:50:25 cfd kernel: Freeing unused kernel image memory: 2752K
Apr 17 08:50:25 cfd kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Apr 17 08:50:25 cfd kernel: Write protecting the kernel read-only data: 26624k
Apr 17 08:50:25 cfd kernel: Freeing unused kernel image memory: 2008K
Apr 17 08:50:25 cfd kernel: Freeing unused kernel image memory: 736K
Apr 17 08:50:25 cfd kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Apr 17 08:50:25 cfd kernel: x86/mm: Checking user space page tables
Apr 17 08:50:25 cfd kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Apr 17 08:50:25 cfd kernel: Run /init as init process
Apr 17 08:50:25 cfd kernel: hidraw: raw HID events driver (C) Jiri Kosina
Apr 17 08:50:25 cfd kernel: i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vdd not found, using dummy regulator
Apr 17 08:50:25 cfd kernel: i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vddl not found, using dummy regulator
Apr 17 08:50:25 cfd kernel: usb 1-4: new full-speed USB device number 2 using xhci_hcd
Apr 17 08:50:25 cfd kernel: i801_smbus 0000:00:1f.3: SPD Write Disable is set
Apr 17 08:50:25 cfd kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Apr 17 08:50:25 cfd kernel: r8169 0000:02:00.2: can't disable ASPM; OS doesn't have ASPM control
Apr 17 08:50:25 cfd kernel: ahci 0000:00:1f.2: version 3.0
Apr 17 08:50:25 cfd kernel: r8169 0000:02:00.2 eth0: RTL8402, 2c:fd:a1:b0:5c:c6, XID 440, IRQ 47
Apr 17 08:50:25 cfd kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Apr 17 08:50:25 cfd kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
Apr 17 08:50:25 cfd kernel: scsi host0: ahci
Apr 17 08:50:25 cfd kernel: scsi host1: ahci
Apr 17 08:50:25 cfd kernel: ata1: SATA max UDMA/133 abar m2048@0xaa222000 port 0xaa222100 irq 48
Apr 17 08:50:25 cfd kernel: ata2: SATA max UDMA/133 abar m2048@0xaa222000 port 0xaa222180 irq 48
Apr 17 08:50:25 cfd kernel: r8169 0000:02:00.2 enp2s0f2: renamed from eth0
Apr 17 08:50:25 cfd kernel: usb 1-4: New USB device found, idVendor=0bda, idProduct=b721, bcdDevice= 2.00
Apr 17 08:50:25 cfd kernel: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 17 08:50:25 cfd kernel: usb 1-4: Product: Bluetooth Radio 
Apr 17 08:50:25 cfd kernel: usb 1-4: Manufacturer: Realtek 
Apr 17 08:50:25 cfd kernel: usb 1-4: SerialNumber: 00e04c000001
Apr 17 08:50:25 cfd kernel: usb 1-5: new high-speed USB device number 3 using xhci_hcd
Apr 17 08:50:25 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 17 08:50:25 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 08:50:25 cfd kernel: ata1.00: ATA-10: Micron_1100_MTFDDAK256TBN,  M0MA020, max UDMA/133
Apr 17 08:50:25 cfd kernel: ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
Apr 17 08:50:25 cfd kernel: ata2.00: ATAPI: HL-DT-ST DVDRAM GUE1N, AS00, max UDMA/133
Apr 17 08:50:25 cfd kernel: ata1.00: configured for UDMA/133
Apr 17 08:50:25 cfd kernel: ata2.00: configured for UDMA/133
Apr 17 08:50:25 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 17 08:50:25 cfd kernel: scsi 0:0:0:0: Direct-Access     ATA      Micron_1100_MTFD A020 PQ: 0 ANSI: 5
Apr 17 08:50:25 cfd kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr 17 08:50:25 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 17 08:50:25 cfd kernel: sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
Apr 17 08:50:25 cfd kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 17 08:50:25 cfd kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 17 08:50:25 cfd kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 08:50:25 cfd kernel: scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUE1N     AS00 PQ: 0 ANSI: 5
Apr 17 08:50:25 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 17 08:50:25 cfd kernel:  sda: sda1 sda2
Apr 17 08:50:25 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 17 08:50:25 cfd kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr 17 08:50:25 cfd kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Apr 17 08:50:25 cfd kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Apr 17 08:50:25 cfd kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Apr 17 08:50:25 cfd kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Apr 17 08:50:25 cfd kernel: usb 1-5: New USB device found, idVendor=04f2, idProduct=b52b, bcdDevice=95.52
Apr 17 08:50:25 cfd kernel: usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Apr 17 08:50:25 cfd kernel: usb 1-5: Product: USB2.0 VGA UVC WebCam
Apr 17 08:50:25 cfd kernel: usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
Apr 17 08:50:25 cfd kernel: usb 1-5: SerialNumber: 0x0001
Apr 17 08:50:25 cfd kernel: tsc: Refined TSC clocksource calibration: 1995.381 MHz
Apr 17 08:50:25 cfd kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398645f40a8, max_idle_ns: 881590586805 ns
Apr 17 08:50:25 cfd kernel: clocksource: Switched to clocksource tsc
Apr 17 08:50:25 cfd kernel: fbcon: Taking over console
Apr 17 08:50:25 cfd kernel: Console: switching to colour frame buffer device 128x48
Apr 17 08:50:25 cfd kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Apr 17 08:50:25 cfd systemd[1]: Inserted module 'autofs4'
Apr 17 08:50:25 cfd systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
Apr 17 08:50:25 cfd systemd[1]: Detected architecture x86-64.
Apr 17 08:50:25 cfd systemd[1]: Set hostname to <cfd>.
Apr 17 08:50:25 cfd systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
Apr 17 08:50:25 cfd systemd[1]: Created slice system-modprobe.slice.
Apr 17 08:50:25 cfd systemd[1]: Created slice system-postfix.slice.
Apr 17 08:50:25 cfd systemd[1]: Created slice system-systemd\x2dfsck.slice.
Apr 17 08:50:25 cfd systemd[1]: Created slice User and Session Slice.
Apr 17 08:50:25 cfd systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Apr 17 08:50:25 cfd systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Apr 17 08:50:25 cfd systemd[1]: Reached target User and Group Name Lookups.
Apr 17 08:50:25 cfd systemd[1]: Reached target Remote File Systems.
Apr 17 08:50:25 cfd systemd[1]: Reached target Slices.
Apr 17 08:50:25 cfd systemd[1]: Listening on Syslog Socket.
Apr 17 08:50:25 cfd systemd[1]: Listening on fsck to fsckd communication Socket.
Apr 17 08:50:25 cfd systemd[1]: Listening on initctl Compatibility Named Pipe.
Apr 17 08:50:25 cfd systemd[1]: Listening on Journal Audit Socket.
Apr 17 08:50:25 cfd systemd[1]: Listening on Journal Socket (/dev/log).
Apr 17 08:50:25 cfd systemd[1]: Listening on Journal Socket.
Apr 17 08:50:25 cfd systemd[1]: Listening on udev Control Socket.
Apr 17 08:50:25 cfd systemd[1]: Listening on udev Kernel Socket.
Apr 17 08:50:25 cfd systemd[1]: Mounting Huge Pages File System...
Apr 17 08:50:25 cfd systemd[1]: Mounting POSIX Message Queue File System...
Apr 17 08:50:25 cfd systemd[1]: Mounting Kernel Debug File System...
Apr 17 08:50:25 cfd systemd[1]: Mounting Kernel Trace File System...
Apr 17 08:50:25 cfd systemd[1]: Starting Journal Service...
Apr 17 08:50:25 cfd systemd[1]: Starting Set the console keyboard layout...
Apr 17 08:50:25 cfd systemd[1]: Starting Create list of static device nodes for the current kernel...
Apr 17 08:50:25 cfd systemd[1]: Starting Load Kernel Module drm...
Apr 17 08:50:25 cfd systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Apr 17 08:50:25 cfd systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
Apr 17 08:50:25 cfd systemd[1]: Starting Load Kernel Modules...
Apr 17 08:50:25 cfd systemd[1]: Starting Remount Root and Kernel File Systems...
Apr 17 08:50:25 cfd systemd[1]: Starting udev Coldplug all Devices...
Apr 17 08:50:25 cfd systemd[1]: Starting Uncomplicated firewall...
Apr 17 08:50:25 cfd systemd[1]: Started Read required files in advance.
Apr 17 08:50:25 cfd kernel: EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Apr 17 08:50:25 cfd systemd[1]: Mounted Huge Pages File System.
Apr 17 08:50:25 cfd systemd[1]: Mounted POSIX Message Queue File System.
Apr 17 08:50:25 cfd systemd[1]: Mounted Kernel Debug File System.
Apr 17 08:50:25 cfd systemd[1]: Mounted Kernel Trace File System.
Apr 17 08:50:25 cfd systemd[1]: Finished Create list of static device nodes for the current kernel.
Apr 17 08:50:25 cfd systemd[1]: Finished Remount Root and Kernel File Systems.
Apr 17 08:50:25 cfd systemd[1]: Finished Uncomplicated firewall.
Apr 17 08:50:25 cfd systemd[1]: Activating swap /swapfile...
Apr 17 08:50:25 cfd systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Apr 17 08:50:25 cfd systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Apr 17 08:50:25 cfd systemd[1]: Starting Load/Save Random Seed...
Apr 17 08:50:25 cfd systemd[1]: Starting Create System Users...
Apr 17 08:50:25 cfd systemd[1]: modprobe@drm.service: Succeeded.
Apr 17 08:50:25 cfd systemd[1]: Finished Load Kernel Module drm.
Apr 17 08:50:25 cfd systemd[1]: Finished Load/Save Random Seed.
Apr 17 08:50:25 cfd systemd[1]: Finished Create System Users.
Apr 17 08:50:25 cfd systemd[1]: Starting Create Static Device Nodes in /dev...
Apr 17 08:50:25 cfd kernel: lp: driver loaded but no devices found
Apr 17 08:50:25 cfd kernel: ppdev: user-space parallel port driver
Apr 17 08:50:25 cfd systemd[1]: Started Journal Service.
Apr 17 08:50:25 cfd kernel: IPMI message handler: version 39.2
Apr 17 08:50:25 cfd kernel: ipmi device interface
Apr 17 08:50:25 cfd kernel: Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
Apr 17 08:50:25 cfd kernel: input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input4
Apr 17 08:50:26 cfd kernel: elan_i2c i2c-ELAN1000:00: i2c-ELAN1000:00 supply vcc not found, using dummy regulator
Apr 17 08:50:26 cfd kernel: proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
Apr 17 08:50:26 cfd kernel: asus_wmi: ASUS WMI generic driver loaded
Apr 17 08:50:26 cfd kernel: asus_wmi: Initialization: 0x1
Apr 17 08:50:26 cfd kernel: asus_wmi: BIOS WMI version: 7.9
Apr 17 08:50:26 cfd kernel: asus_wmi: SFUN value: 0xa0077
Apr 17 08:50:26 cfd kernel: asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
Apr 17 08:50:26 cfd kernel: asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
Apr 17 08:50:26 cfd kernel: mc: Linux media interface: v0.10
Apr 17 08:50:26 cfd kernel: input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
Apr 17 08:50:26 cfd kernel: videodev: Linux video capture interface: v2.00
Apr 17 08:50:26 cfd kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Apr 17 08:50:26 cfd kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Apr 17 08:50:26 cfd kernel: Bluetooth: Core ver 2.22
Apr 17 08:50:26 cfd kernel: NET: Registered protocol family 31
Apr 17 08:50:26 cfd kernel: Bluetooth: HCI device and connection manager initialized
Apr 17 08:50:26 cfd kernel: Bluetooth: HCI socket layer initialized
Apr 17 08:50:26 cfd kernel: Bluetooth: L2CAP socket layer initialized
Apr 17 08:50:26 cfd kernel: Bluetooth: SCO socket layer initialized
Apr 17 08:50:26 cfd kernel: elan_i2c i2c-ELAN1000:00: Elan Touchpad: Module ID: 0x0005, Firmware: 0x0004, Sample: 0x000d, IAP: 0x000e
Apr 17 08:50:26 cfd kernel: input: Elan Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-ELAN1000:00/input/input6
Apr 17 08:50:26 cfd kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
Apr 17 08:50:26 cfd kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Apr 17 08:50:26 cfd kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
Apr 17 08:50:26 cfd kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
Apr 17 08:50:26 cfd kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Apr 17 08:50:26 cfd kernel: cryptd: max_cpu_qlen set to 1000
Apr 17 08:50:26 cfd kernel: usbcore: registered new interface driver btusb
Apr 17 08:50:26 cfd kernel: uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b52b)
Apr 17 08:50:26 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 17 08:50:26 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 17 08:50:26 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 17 08:50:26 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 17 08:50:26 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 17 08:50:26 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 17 08:50:26 cfd kernel: input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input7
Apr 17 08:50:26 cfd kernel: AVX2 version of gcm_enc/dec engaged.
Apr 17 08:50:26 cfd kernel: AES CTR mode by8 optimization enabled
Apr 17 08:50:26 cfd kernel: usbcore: registered new interface driver uvcvideo
Apr 17 08:50:26 cfd kernel: USB Video Class driver (1.1.1)
Apr 17 08:50:26 cfd kernel: checking generic (b0000000 300000) vs hw (b0000000 10000000)
Apr 17 08:50:26 cfd kernel: fb0: switching to inteldrmfb from EFI VGA
Apr 17 08:50:26 cfd kernel: Console: switching to colour dummy device 80x25
Apr 17 08:50:26 cfd kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
Apr 17 08:50:26 cfd kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Apr 17 08:50:26 cfd kernel: [drm] Driver supports precise vblank timestamp query.
Apr 17 08:50:26 cfd kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Apr 17 08:50:26 cfd kernel: [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
Apr 17 08:50:26 cfd kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Apr 17 08:50:26 cfd kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
Apr 17 08:50:26 cfd kernel: snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Apr 17 08:50:26 cfd kernel: fbcon: i915drmfb (fb0) is primary device
Apr 17 08:50:26 cfd kernel: Console: switching to colour frame buffer device 240x67
Apr 17 08:50:26 cfd kernel: i915 0000:00:02.0: fb0: i915drmfb frame buffer device
Apr 17 08:50:26 cfd kernel: input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
Apr 17 08:50:26 cfd kernel: input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
Apr 17 08:50:26 cfd kernel: input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
Apr 17 08:50:26 cfd kernel: input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
Apr 17 08:50:26 cfd kernel: input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0:    inputs:
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x1b
Apr 17 08:50:26 cfd kernel: snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
Apr 17 08:50:26 cfd kernel: rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
Apr 17 08:50:26 cfd kernel: ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
Apr 17 08:50:26 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 17 08:50:26 cfd kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
Apr 17 08:50:27 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 17 08:50:27 cfd kernel: intel_rapl_common: Found RAPL domain package
Apr 17 08:50:27 cfd kernel: intel_rapl_common: Found RAPL domain core
Apr 17 08:50:27 cfd kernel: intel_rapl_common: Found RAPL domain uncore
Apr 17 08:50:27 cfd kernel: intel_rapl_common: Found RAPL domain dram
Apr 17 08:50:27 cfd kernel: intel_rapl_common: RAPL package-0 domain package locked by BIOS
Apr 17 08:50:27 cfd kernel: intel_rapl_common: RAPL package-0 domain dram locked by BIOS
Apr 17 08:50:27 cfd kernel: rtl8723be 0000:03:00.0 wlp3s0: renamed from wlan0
Apr 17 08:50:28 cfd kernel: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.835:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=748 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.835:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=747 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.867:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=754 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.871:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=753 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.883:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=755 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.883:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=756 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.883:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=756 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.883:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=756 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.899:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=757 comm="apparmor_parser"
Apr 17 08:50:28 cfd kernel: audit: type=1400 audit(1650178228.955:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=760 comm="apparmor_parser"
Apr 17 08:50:31 cfd kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Apr 17 08:50:31 cfd kernel: Bluetooth: BNEP filters: protocol multicast
Apr 17 08:50:31 cfd kernel: Bluetooth: BNEP socket layer initialized
Apr 17 08:50:31 cfd kernel: powercap intel-rapl:0: package locked by BIOS, monitoring only
Apr 17 08:50:31 cfd kernel: NET: Registered protocol family 38
Apr 17 08:50:32 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 17 08:50:33 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 17 08:50:33 cfd kernel: kauditd_printk_skb: 35 callbacks suppressed
Apr 17 08:50:33 cfd kernel: audit: type=1400 audit(1650178233.847:47): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=946 comm="cups-browsed" capability=23  capname="sys_nice"
Apr 17 08:50:35 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 17 08:50:35 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 08:50:35 cfd kernel: wlp3s0: authenticated
Apr 17 08:50:35 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 08:50:35 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 17 08:50:35 cfd kernel: wlp3s0: associated
Apr 17 08:50:35 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 17 08:50:45 cfd kernel: rfkill: input handler disabled
Apr 17 08:50:50 cfd kernel: Bluetooth: RFCOMM TTY layer initialized
Apr 17 08:50:50 cfd kernel: Bluetooth: RFCOMM socket layer initialized
Apr 17 08:50:50 cfd kernel: Bluetooth: RFCOMM ver 1.11
Apr 17 08:50:50 cfd kernel: rfkill: input handler enabled
Apr 17 08:50:55 cfd kernel: rfkill: input handler disabled
Apr 17 08:50:58 cfd kernel: audit: type=1400 audit(1650178257.995:48): apparmor="DENIED" operation="ptrace" profile="/usr/share/hplip/systray.py" pid=2433 comm="hp-systray" requested_mask="read" denied_mask="read" peer="unconfined"
Apr 17 08:56:43 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 17 08:56:43 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 17 08:56:44 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 17 08:56:44 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 08:56:44 cfd kernel: wlp3s0: authenticated
Apr 17 08:56:44 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 08:56:44 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 17 08:56:44 cfd kernel: wlp3s0: associated
Apr 17 09:31:40 cfd kernel: perf: interrupt took too long (2677 > 2500), lowering kernel.perf_event_max_sample_rate to 74500
Apr 17 09:43:07 cfd kernel: perf: interrupt took too long (3347 > 3346), lowering kernel.perf_event_max_sample_rate to 59750
Apr 17 09:48:23 cfd kernel: usb 1-3: new full-speed USB device number 4 using xhci_hcd
Apr 17 09:48:23 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 09:48:23 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 09:48:23 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 09:48:23 cfd kernel: usbcore: registered new interface driver usbserial_generic
Apr 17 09:48:23 cfd kernel: usbserial: USB Serial support registered for generic
Apr 17 09:48:23 cfd kernel: usbcore: registered new interface driver ch341
Apr 17 09:48:23 cfd kernel: usbserial: USB Serial support registered for ch341-uart
Apr 17 09:48:23 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 09:48:23 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 09:48:31 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 09:48:31 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 09:48:41 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 09:48:41 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 10:03:19 cfd kernel: perf: interrupt took too long (4193 > 4183), lowering kernel.perf_event_max_sample_rate to 47500
Apr 17 10:07:39 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 10:07:40 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 10:07:40 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 10:07:42 cfd kernel: usb 1-3: USB disconnect, device number 4
Apr 17 10:07:42 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 10:07:42 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 10:07:44 cfd kernel: usb 1-1: new full-speed USB device number 5 using xhci_hcd
Apr 17 10:07:44 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 10:07:44 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 10:07:44 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 17 10:07:44 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 17 10:07:44 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 17 10:07:47 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 10:07:47 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 10:07:47 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 10:07:47 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 10:07:47 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 10:07:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 10:07:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 10:07:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 10:07:49 cfd kernel: usb 1-1: USB disconnect, device number 5
Apr 17 10:07:49 cfd kernel: usb 1-1: failed to send control message: -19
Apr 17 10:07:49 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 10:07:49 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 17 10:07:51 cfd kernel: usb 1-3: new full-speed USB device number 6 using xhci_hcd
Apr 17 10:07:51 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 10:07:51 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 10:07:51 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 10:07:51 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 10:07:51 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 10:08:12 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 17 10:08:13 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 10:08:13 cfd kernel: ata2.00: configured for UDMA/133
Apr 17 10:08:16 cfd kernel: PM: suspend entry (deep)
Apr 17 10:50:49 cfd kernel: Filesystems sync: 0.212 seconds
Apr 17 10:50:49 cfd kernel: Freezing user space processes ... (elapsed 0.003 seconds) done.
Apr 17 10:50:49 cfd kernel: OOM killer disabled.
Apr 17 10:50:49 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 17 10:50:49 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 17 10:50:49 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 17 10:50:49 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 17 10:50:49 cfd kernel: ACPI: EC: interrupt blocked
Apr 17 10:50:49 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 17 10:50:49 cfd kernel: ACPI: EC: event blocked
Apr 17 10:50:49 cfd kernel: ACPI: EC: EC stopped
Apr 17 10:50:49 cfd kernel: PM: Saving platform NVS memory
Apr 17 10:50:49 cfd kernel: Disabling non-boot CPUs ...
Apr 17 10:50:49 cfd kernel: IRQ 50: no longer affine to CPU1
Apr 17 10:50:49 cfd kernel: smpboot: CPU 1 is now offline
Apr 17 10:50:49 cfd kernel: smpboot: CPU 2 is now offline
Apr 17 10:50:49 cfd kernel: IRQ 19: no longer affine to CPU3
Apr 17 10:50:49 cfd kernel: IRQ 22: no longer affine to CPU3
Apr 17 10:50:49 cfd kernel: IRQ 42: no longer affine to CPU3
Apr 17 10:50:49 cfd kernel: smpboot: CPU 3 is now offline
Apr 17 10:50:49 cfd kernel: ACPI: Low-level resume complete
Apr 17 10:50:49 cfd kernel: ACPI: EC: EC started
Apr 17 10:50:49 cfd kernel: PM: Restoring platform NVS memory
Apr 17 10:50:49 cfd kernel: Enabling non-boot CPUs ...
Apr 17 10:50:49 cfd kernel: x86: Booting SMP configuration:
Apr 17 10:50:49 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 17 10:50:49 cfd kernel: CPU1 is up
Apr 17 10:50:49 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 17 10:50:49 cfd kernel: CPU2 is up
Apr 17 10:50:49 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 17 10:50:49 cfd kernel: CPU3 is up
Apr 17 10:50:49 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 17 10:50:49 cfd kernel: ACPI: EC: interrupt unblocked
Apr 17 10:50:49 cfd kernel: ACPI: EC: event unblocked
Apr 17 10:50:49 cfd kernel: usb usb1: root hub lost power or was reset
Apr 17 10:50:49 cfd kernel: usb usb2: root hub lost power or was reset
Apr 17 10:50:49 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 17 10:50:49 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 17 10:50:49 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 17 10:50:49 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 10:50:49 cfd kernel: ata2.00: configured for UDMA/133
Apr 17 10:50:49 cfd kernel: ata1.00: configured for UDMA/133
Apr 17 10:50:49 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 17 10:50:49 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 17 10:50:49 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 17 10:50:49 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 17 10:50:49 cfd kernel: OOM killer enabled.
Apr 17 10:50:49 cfd kernel: Restarting tasks ... 
Apr 17 10:50:49 cfd kernel: usb 1-3: USB disconnect, device number 6
Apr 17 10:50:49 cfd kernel: usb 1-3: failed to send control message: -19
Apr 17 10:50:49 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 10:50:49 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 10:50:49 cfd kernel: done.
Apr 17 10:50:49 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 17 10:50:49 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 17 10:50:49 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 17 10:50:49 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 17 10:50:49 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 17 10:50:49 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 17 10:50:49 cfd kernel: PM: suspend exit
Apr 17 10:50:49 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 17 10:50:49 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 17 10:50:50 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 17 10:50:51 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 17 10:50:51 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 10:50:51 cfd kernel: wlp3s0: authenticated
Apr 17 10:50:51 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 10:50:51 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 17 10:50:51 cfd kernel: wlp3s0: associated
Apr 17 10:50:51 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 17 10:58:48 cfd kernel: usb 1-3: new full-speed USB device number 7 using xhci_hcd
Apr 17 10:58:48 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 10:58:48 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 10:58:48 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 10:58:48 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 10:58:48 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 11:12:40 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 11:12:47 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 11:18:40 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 11:19:50 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 11:23:34 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 17 11:23:34 cfd kernel: wlp3s0: authenticate with 8e:83:83:be:86:d5
Apr 17 11:23:34 cfd kernel: wlp3s0: send auth to 8e:83:83:be:86:d5 (try 1/3)
Apr 17 11:23:34 cfd kernel: wlp3s0: authenticated
Apr 17 11:23:34 cfd kernel: wlp3s0: associate with 8e:83:83:be:86:d5 (try 1/3)
Apr 17 11:23:34 cfd kernel: wlp3s0: RX AssocResp from 8e:83:83:be:86:d5 (capab=0x1431 status=0 aid=1)
Apr 17 11:23:34 cfd kernel: wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 2), will use 2
Apr 17 11:23:34 cfd kernel: wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 3), will use 2
Apr 17 11:23:34 cfd kernel: wlp3s0: associated
Apr 17 11:23:35 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 17 11:30:45 cfd kernel: wlp3s0: deauthenticating from 8e:83:83:be:86:d5 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 17 11:30:46 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 17 11:30:46 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 11:30:46 cfd kernel: wlp3s0: authenticated
Apr 17 11:30:46 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 11:30:46 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=1)
Apr 17 11:30:46 cfd kernel: wlp3s0: associated
Apr 17 11:30:46 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 17 11:32:53 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 17 11:32:56 cfd kernel: wlp3s0: authenticate with 8e:83:83:be:86:d5
Apr 17 11:32:56 cfd kernel: wlp3s0: send auth to 8e:83:83:be:86:d5 (try 1/3)
Apr 17 11:32:56 cfd kernel: wlp3s0: authenticated
Apr 17 11:32:56 cfd kernel: wlp3s0: associate with 8e:83:83:be:86:d5 (try 1/3)
Apr 17 11:32:56 cfd kernel: wlp3s0: RX AssocResp from 8e:83:83:be:86:d5 (capab=0x1431 status=0 aid=5)
Apr 17 11:32:56 cfd kernel: wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 2), will use 2
Apr 17 11:32:56 cfd kernel: wlp3s0: AP has invalid WMM params (AIFSN=0 for ACI 3), will use 2
Apr 17 11:32:56 cfd kernel: wlp3s0: associated
Apr 17 11:32:56 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 17 11:32:57 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 11:33:40 cfd kernel: wlp3s0: deauthenticating from 8e:83:83:be:86:d5 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 17 11:33:40 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 11:33:40 cfd kernel: ata2.00: configured for UDMA/133
Apr 17 11:33:45 cfd kernel: PM: suspend entry (deep)
Apr 17 19:34:32 cfd kernel: Filesystems sync: 0.135 seconds
Apr 17 19:34:32 cfd kernel: Freezing user space processes ... (elapsed 0.006 seconds) done.
Apr 17 19:34:32 cfd kernel: OOM killer disabled.
Apr 17 19:34:32 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 17 19:34:32 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 17 19:34:32 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 17 19:34:32 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 17 19:34:32 cfd kernel: ACPI: EC: interrupt blocked
Apr 17 19:34:32 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 17 19:34:32 cfd kernel: ACPI: EC: event blocked
Apr 17 19:34:32 cfd kernel: ACPI: EC: EC stopped
Apr 17 19:34:32 cfd kernel: PM: Saving platform NVS memory
Apr 17 19:34:32 cfd kernel: Disabling non-boot CPUs ...
Apr 17 19:34:32 cfd kernel: IRQ 50: no longer affine to CPU1
Apr 17 19:34:32 cfd kernel: smpboot: CPU 1 is now offline
Apr 17 19:34:32 cfd kernel: smpboot: CPU 2 is now offline
Apr 17 19:34:32 cfd kernel: IRQ 19: no longer affine to CPU3
Apr 17 19:34:32 cfd kernel: IRQ 42: no longer affine to CPU3
Apr 17 19:34:32 cfd kernel: IRQ 43: no longer affine to CPU3
Apr 17 19:34:32 cfd kernel: IRQ 44: no longer affine to CPU3
Apr 17 19:34:32 cfd kernel: smpboot: CPU 3 is now offline
Apr 17 19:34:32 cfd kernel: ACPI: Low-level resume complete
Apr 17 19:34:32 cfd kernel: ACPI: EC: EC started
Apr 17 19:34:32 cfd kernel: PM: Restoring platform NVS memory
Apr 17 19:34:32 cfd kernel: Enabling non-boot CPUs ...
Apr 17 19:34:32 cfd kernel: x86: Booting SMP configuration:
Apr 17 19:34:32 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 17 19:34:32 cfd kernel: CPU1 is up
Apr 17 19:34:32 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 17 19:34:32 cfd kernel: CPU2 is up
Apr 17 19:34:32 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 17 19:34:32 cfd kernel: CPU3 is up
Apr 17 19:34:32 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 17 19:34:32 cfd kernel: ACPI: EC: interrupt unblocked
Apr 17 19:34:32 cfd kernel: ACPI: EC: event unblocked
Apr 17 19:34:32 cfd kernel: usb usb1: root hub lost power or was reset
Apr 17 19:34:32 cfd kernel: usb usb2: root hub lost power or was reset
Apr 17 19:34:32 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 17 19:34:32 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 17 19:34:32 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 19:34:32 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 17 19:34:32 cfd kernel: ata2.00: configured for UDMA/133
Apr 17 19:34:32 cfd kernel: ata1.00: configured for UDMA/133
Apr 17 19:34:32 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 17 19:34:32 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 17 19:34:32 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 17 19:34:32 cfd kernel: usb 1-3: reset full-speed USB device number 7 using xhci_hcd
Apr 17 19:34:32 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 17 19:34:32 cfd kernel: OOM killer enabled.
Apr 17 19:34:32 cfd kernel: Restarting tasks ... done.
Apr 17 19:34:32 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 17 19:34:32 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 17 19:34:32 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 17 19:34:32 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 17 19:34:32 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 17 19:34:32 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 17 19:34:32 cfd kernel: PM: suspend exit
Apr 17 19:34:32 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 17 19:34:32 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 17 19:34:33 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 17 19:34:34 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 17 19:34:34 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 19:34:34 cfd kernel: wlp3s0: authenticated
Apr 17 19:34:34 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 19:34:34 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 17 19:34:34 cfd kernel: wlp3s0: associated
Apr 17 19:34:34 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 17 19:35:14 cfd kernel: asus_wmi: Unknown key cf pressed
Apr 17 19:36:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:36:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:37:16 cfd kernel: usb 1-3: USB disconnect, device number 7
Apr 17 19:37:16 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 19:37:16 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 19:37:19 cfd kernel: usb 1-3: new full-speed USB device number 8 using xhci_hcd
Apr 17 19:37:19 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:37:19 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:37:19 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 19:37:19 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 19:37:19 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 19:37:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:37:27 cfd kernel: usb 1-3: USB disconnect, device number 8
Apr 17 19:37:27 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 19:37:27 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 19:37:28 cfd kernel: usb 1-1: new full-speed USB device number 9 using xhci_hcd
Apr 17 19:37:29 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:37:29 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:37:29 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 17 19:37:29 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 17 19:37:29 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 17 19:37:33 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:37:34 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:37:35 cfd kernel: usb 1-1: USB disconnect, device number 9
Apr 17 19:37:35 cfd kernel: usb 1-1: failed to send control message: -19
Apr 17 19:37:35 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 19:37:35 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 17 19:37:38 cfd kernel: usb 1-3: new full-speed USB device number 10 using xhci_hcd
Apr 17 19:37:38 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:37:38 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:37:38 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 19:37:38 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 19:37:38 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 19:37:45 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:38:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:10 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:11 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:41 cfd kernel: perf: interrupt took too long (5364 > 5241), lowering kernel.perf_event_max_sample_rate to 37250
Apr 17 19:39:41 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:41 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:39:44 cfd kernel: usb 1-3: USB disconnect, device number 10
Apr 17 19:39:44 cfd kernel: usb 1-3: failed to send control message: -19
Apr 17 19:39:44 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 19:39:44 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 19:39:47 cfd kernel: usb 1-1: new full-speed USB device number 11 using xhci_hcd
Apr 17 19:39:47 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:39:47 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:39:47 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 17 19:39:47 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 17 19:39:47 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 17 19:39:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 19:39:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 19:39:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 19:39:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 19:39:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 19:39:56 cfd kernel: usb 1-1: USB disconnect, device number 11
Apr 17 19:39:56 cfd kernel: usb 1-1: failed to send control message: -19
Apr 17 19:39:56 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 19:39:56 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 17 19:39:58 cfd kernel: usb 1-3: new full-speed USB device number 12 using xhci_hcd
Apr 17 19:39:58 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:39:58 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:39:58 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 19:39:58 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 19:39:58 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 19:41:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:41:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:41:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:41:32 cfd kernel: usb 1-3: USB disconnect, device number 12
Apr 17 19:41:32 cfd kernel: usb 1-3: failed to send control message: -19
Apr 17 19:41:32 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 19:41:32 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 19:41:34 cfd kernel: usb 1-3: new full-speed USB device number 13 using xhci_hcd
Apr 17 19:41:35 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:41:35 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:41:35 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 19:41:35 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 19:41:35 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB1
Apr 17 19:42:45 cfd kernel: usb 1-3: USB disconnect, device number 13
Apr 17 19:42:45 cfd kernel: ch341-uart ttyUSB1: ch341-uart converter now disconnected from ttyUSB1
Apr 17 19:42:45 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 19:42:46 cfd kernel: usb 1-3: new full-speed USB device number 14 using xhci_hcd
Apr 17 19:42:46 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 19:42:46 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 19:42:46 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 19:42:46 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 19:42:46 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 19:42:55 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 19:42:55 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 19:42:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:43:28 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 17 19:43:28 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 17 19:43:29 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 17 19:43:29 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 19:43:29 cfd kernel: wlp3s0: authenticated
Apr 17 19:43:29 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 17 19:43:29 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 17 19:43:29 cfd kernel: wlp3s0: associated
Apr 17 19:46:10 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:47:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 19:48:00 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:03:09 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:03:50 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:03:50 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:03:58 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:03:58 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:03:58 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:04:00 cfd kernel: usb 1-3: USB disconnect, device number 14
Apr 17 20:04:00 cfd kernel: usb 1-3: failed to send control message: -19
Apr 17 20:04:00 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 20:04:00 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 20:04:01 cfd kernel: usb 1-3: new full-speed USB device number 15 using xhci_hcd
Apr 17 20:04:01 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 20:04:01 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 20:04:01 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 17 20:04:01 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 17 20:04:01 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 17 20:04:08 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 20:04:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 17 20:04:19 cfd kernel: usb 1-3: USB disconnect, device number 15
Apr 17 20:04:19 cfd kernel: usb 1-3: failed to send control message: -19
Apr 17 20:04:19 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 20:04:19 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 17 20:04:21 cfd kernel: usb 1-1: new full-speed USB device number 16 using xhci_hcd
Apr 17 20:04:21 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 20:04:21 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 20:04:21 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 17 20:04:21 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 17 20:04:21 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 17 20:04:28 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 20:04:28 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 20:04:28 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 20:04:28 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 17 20:04:28 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:28 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:28 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:28 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:28 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:31 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:33 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:33 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:33 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:33 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:04:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 20:47:54 cfd kernel: usb 1-1: USB disconnect, device number 16
Apr 17 20:47:54 cfd kernel: usb 1-1: failed to send control message: -19
Apr 17 20:47:54 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 17 20:47:54 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 17 21:10:46 cfd kernel: perf: interrupt took too long (6720 > 6705), lowering kernel.perf_event_max_sample_rate to 29750
Apr 17 21:20:00 cfd kernel: asus_wmi: Unknown key cf pressed
Apr 17 21:36:22 cfd kernel: usb 1-1: new full-speed USB device number 17 using xhci_hcd
Apr 17 21:36:22 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 17 21:36:22 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 17 21:36:22 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 17 21:36:22 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 17 21:36:22 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 17 21:37:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 21:39:37 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 21:39:37 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 21:39:37 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 21:39:37 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:27:40 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:30:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:30:19 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:30:19 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:30:19 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:30:22 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:30:23 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 22:32:18 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:02 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:02 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:02 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:14 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:14 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:14 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:31:14 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:35:56 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:36:43 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:36:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 17 23:47:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:21:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:23:16 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:34 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:35 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:35 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:45 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:46 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:46 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:46 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:32:52 cfd kernel: usb 1-1: USB disconnect, device number 17
Apr 18 00:32:52 cfd kernel: usb 1-1: failed to send control message: -19
Apr 18 00:32:52 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 18 00:32:52 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 18 00:32:53 cfd kernel: usb 1-3: new full-speed USB device number 18 using xhci_hcd
Apr 18 00:32:53 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 18 00:32:53 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 18 00:32:53 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 18 00:32:53 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 18 00:32:53 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 18 00:33:02 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:33:45 cfd kernel: usb 1-3: USB disconnect, device number 18
Apr 18 00:33:45 cfd kernel: usb 1-3: failed to send control message: -19
Apr 18 00:33:45 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 18 00:33:45 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 18 00:33:48 cfd kernel: usb 1-3: new full-speed USB device number 19 using xhci_hcd
Apr 18 00:33:48 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 18 00:33:48 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 18 00:33:48 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 18 00:33:48 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 18 00:33:48 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 18 00:34:00 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:34:01 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:34:10 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:34:10 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:34:10 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:34:10 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:34:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:34:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:41:04 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:47:16 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:47:38 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:47:42 cfd kernel: usb 1-3: USB disconnect, device number 19
Apr 18 00:47:42 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 18 00:47:42 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 18 00:47:44 cfd kernel: usb 1-1: new full-speed USB device number 20 using xhci_hcd
Apr 18 00:47:44 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 18 00:47:44 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 18 00:47:44 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 18 00:47:44 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 18 00:47:44 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 18 00:47:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:47:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:47:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:47:48 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:47:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:48 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:47:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:48:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 18 00:48:41 cfd kernel: usb 1-1: USB disconnect, device number 20
Apr 18 00:48:41 cfd kernel: usb 1-1: failed to send control message: -19
Apr 18 00:48:41 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 18 00:48:41 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 18 00:48:42 cfd kernel: usb 1-3: new full-speed USB device number 21 using xhci_hcd
Apr 18 00:48:42 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 18 00:48:42 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 18 00:48:42 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 18 00:48:42 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 18 00:48:42 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 18 00:48:53 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:48:53 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 18 00:49:03 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:49:07 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:49:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:49:09 cfd kernel: perf: interrupt took too long (8425 > 8400), lowering kernel.perf_event_max_sample_rate to 23500
Apr 18 00:49:09 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:59:00 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:59:00 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:59:27 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 00:59:27 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 01:04:30 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 01:09:39 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 18 01:09:39 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 18 01:09:39 cfd kernel: ata2.00: configured for UDMA/133
Apr 18 01:09:46 cfd kernel: PM: suspend entry (deep)
Apr 18 01:09:47 cfd kernel: Filesystems sync: 0.183 seconds
Apr 18 10:33:20 cfd kernel: Freezing user space processes ... (elapsed 0.008 seconds) done.
Apr 18 10:33:20 cfd kernel: OOM killer disabled.
Apr 18 10:33:20 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 18 10:33:20 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 18 10:33:20 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 18 10:33:20 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 18 10:33:20 cfd kernel: ACPI: EC: interrupt blocked
Apr 18 10:33:20 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 18 10:33:20 cfd kernel: ACPI: EC: event blocked
Apr 18 10:33:20 cfd kernel: ACPI: EC: EC stopped
Apr 18 10:33:20 cfd kernel: PM: Saving platform NVS memory
Apr 18 10:33:20 cfd kernel: Disabling non-boot CPUs ...
Apr 18 10:33:20 cfd kernel: IRQ 50: no longer affine to CPU1
Apr 18 10:33:20 cfd kernel: smpboot: CPU 1 is now offline
Apr 18 10:33:20 cfd kernel: smpboot: CPU 2 is now offline
Apr 18 10:33:20 cfd kernel: IRQ 19: no longer affine to CPU3
Apr 18 10:33:20 cfd kernel: IRQ 42: no longer affine to CPU3
Apr 18 10:33:20 cfd kernel: IRQ 43: no longer affine to CPU3
Apr 18 10:33:20 cfd kernel: IRQ 44: no longer affine to CPU3
Apr 18 10:33:20 cfd kernel: smpboot: CPU 3 is now offline
Apr 18 10:33:20 cfd kernel: ACPI: Low-level resume complete
Apr 18 10:33:20 cfd kernel: ACPI: EC: EC started
Apr 18 10:33:20 cfd kernel: PM: Restoring platform NVS memory
Apr 18 10:33:20 cfd kernel: Enabling non-boot CPUs ...
Apr 18 10:33:20 cfd kernel: x86: Booting SMP configuration:
Apr 18 10:33:20 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 18 10:33:20 cfd kernel: CPU1 is up
Apr 18 10:33:20 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 18 10:33:20 cfd kernel: CPU2 is up
Apr 18 10:33:20 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 18 10:33:20 cfd kernel: CPU3 is up
Apr 18 10:33:20 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 18 10:33:20 cfd kernel: ACPI: EC: interrupt unblocked
Apr 18 10:33:20 cfd kernel: ACPI: EC: event unblocked
Apr 18 10:33:20 cfd kernel: usb usb1: root hub lost power or was reset
Apr 18 10:33:20 cfd kernel: usb usb2: root hub lost power or was reset
Apr 18 10:33:20 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 18 10:33:20 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 18 10:33:20 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 18 10:33:20 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 18 10:33:20 cfd kernel: ata2.00: configured for UDMA/133
Apr 18 10:33:20 cfd kernel: ata1.00: configured for UDMA/133
Apr 18 10:33:20 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 18 10:33:20 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 18 10:33:20 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 18 10:33:20 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 18 10:33:20 cfd kernel: usb 1-3: reset full-speed USB device number 21 using xhci_hcd
Apr 18 10:33:20 cfd kernel: OOM killer enabled.
Apr 18 10:33:20 cfd kernel: Restarting tasks ... done.
Apr 18 10:33:20 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 18 10:33:20 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 18 10:33:20 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 18 10:33:20 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 18 10:33:20 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 18 10:33:20 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 18 10:33:20 cfd kernel: PM: suspend exit
Apr 18 10:33:20 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 18 10:33:20 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 18 10:33:21 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 18 10:33:23 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 18 10:33:23 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 18 10:33:23 cfd kernel: wlp3s0: authenticated
Apr 18 10:33:23 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 18 10:33:23 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 18 10:33:23 cfd kernel: wlp3s0: associated
Apr 18 10:33:23 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 18 10:39:40 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 10:46:04 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 18 10:46:04 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 18 10:46:05 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 18 10:46:05 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 18 10:46:05 cfd kernel: wlp3s0: authenticated
Apr 18 10:46:05 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 18 10:46:05 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 18 10:46:05 cfd kernel: wlp3s0: associated
Apr 18 11:30:00 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 11:37:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 12:17:05 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 12:17:05 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 12:46:03 cfd kernel: asus_wmi: Unknown key cf pressed
Apr 18 13:52:57 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 14:01:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 18 14:21:35 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 18 14:21:39 cfd kernel: PM: suspend entry (deep)
Apr 18 14:54:16 cfd kernel: Filesystems sync: 0.063 seconds
Apr 18 14:54:16 cfd kernel: Freezing user space processes ... (elapsed 0.006 seconds) done.
Apr 18 14:54:16 cfd kernel: OOM killer disabled.
Apr 18 14:54:16 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 18 14:54:16 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 18 14:54:16 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 18 14:54:16 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 18 14:54:16 cfd kernel: ACPI: EC: interrupt blocked
Apr 18 14:54:16 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 18 14:54:16 cfd kernel: ACPI: EC: event blocked
Apr 18 14:54:16 cfd kernel: ACPI: EC: EC stopped
Apr 18 14:54:16 cfd kernel: PM: Saving platform NVS memory
Apr 18 14:54:16 cfd kernel: Disabling non-boot CPUs ...
Apr 18 14:54:16 cfd kernel: IRQ 50: no longer affine to CPU1
Apr 18 14:54:16 cfd kernel: smpboot: CPU 1 is now offline
Apr 18 14:54:16 cfd kernel: smpboot: CPU 2 is now offline
Apr 18 14:54:16 cfd kernel: IRQ 19: no longer affine to CPU3
Apr 18 14:54:16 cfd kernel: IRQ 42: no longer affine to CPU3
Apr 18 14:54:16 cfd kernel: IRQ 43: no longer affine to CPU3
Apr 18 14:54:16 cfd kernel: IRQ 44: no longer affine to CPU3
Apr 18 14:54:16 cfd kernel: smpboot: CPU 3 is now offline
Apr 18 14:54:16 cfd kernel: ACPI: Low-level resume complete
Apr 18 14:54:16 cfd kernel: ACPI: EC: EC started
Apr 18 14:54:16 cfd kernel: PM: Restoring platform NVS memory
Apr 18 14:54:16 cfd kernel: Enabling non-boot CPUs ...
Apr 18 14:54:16 cfd kernel: x86: Booting SMP configuration:
Apr 18 14:54:16 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 18 14:54:16 cfd kernel: CPU1 is up
Apr 18 14:54:16 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 18 14:54:16 cfd kernel: CPU2 is up
Apr 18 14:54:16 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 18 14:54:16 cfd kernel: CPU3 is up
Apr 18 14:54:16 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 18 14:54:16 cfd kernel: ACPI: EC: interrupt unblocked
Apr 18 14:54:16 cfd kernel: ACPI: EC: event unblocked
Apr 18 14:54:16 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 18 14:54:16 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 18 14:54:16 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 18 14:54:16 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 18 14:54:16 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 18 14:54:16 cfd kernel: ata2.00: configured for UDMA/133
Apr 18 14:54:16 cfd kernel: ata1.00: configured for UDMA/133
Apr 18 14:54:16 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 18 14:54:16 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 18 14:54:16 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 18 14:54:16 cfd kernel: OOM killer enabled.
Apr 18 14:54:16 cfd kernel: Restarting tasks ... done.
Apr 18 14:54:16 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 18 14:54:16 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 18 14:54:16 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 18 14:54:16 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 18 14:54:16 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 18 14:54:16 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 18 14:54:16 cfd kernel: PM: suspend exit
Apr 18 14:54:17 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 18 14:54:17 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 18 14:54:17 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 18 14:54:19 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 18 14:54:19 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 18 14:54:19 cfd kernel: wlp3s0: authenticated
Apr 18 14:54:19 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 18 14:54:19 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 18 14:54:19 cfd kernel: wlp3s0: associated
Apr 18 14:54:19 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 18 17:52:46 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 18 17:52:51 cfd kernel: PM: suspend entry (deep)
Apr 19 10:49:04 cfd kernel: Filesystems sync: 0.011 seconds
Apr 19 10:49:04 cfd kernel: Freezing user space processes ... (elapsed 0.003 seconds) done.
Apr 19 10:49:04 cfd kernel: OOM killer disabled.
Apr 19 10:49:04 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 19 10:49:04 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 19 10:49:04 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 19 10:49:04 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 19 10:49:04 cfd kernel: ACPI: EC: interrupt blocked
Apr 19 10:49:04 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 19 10:49:04 cfd kernel: ACPI: EC: event blocked
Apr 19 10:49:04 cfd kernel: ACPI: EC: EC stopped
Apr 19 10:49:04 cfd kernel: PM: Saving platform NVS memory
Apr 19 10:49:04 cfd kernel: Disabling non-boot CPUs ...
Apr 19 10:49:04 cfd kernel: IRQ 50: no longer affine to CPU1
Apr 19 10:49:04 cfd kernel: smpboot: CPU 1 is now offline
Apr 19 10:49:04 cfd kernel: smpboot: CPU 2 is now offline
Apr 19 10:49:04 cfd kernel: IRQ 19: no longer affine to CPU3
Apr 19 10:49:04 cfd kernel: IRQ 42: no longer affine to CPU3
Apr 19 10:49:04 cfd kernel: IRQ 43: no longer affine to CPU3
Apr 19 10:49:04 cfd kernel: IRQ 44: no longer affine to CPU3
Apr 19 10:49:04 cfd kernel: smpboot: CPU 3 is now offline
Apr 19 10:49:04 cfd kernel: ACPI: Low-level resume complete
Apr 19 10:49:04 cfd kernel: ACPI: EC: EC started
Apr 19 10:49:04 cfd kernel: PM: Restoring platform NVS memory
Apr 19 10:49:04 cfd kernel: Enabling non-boot CPUs ...
Apr 19 10:49:04 cfd kernel: x86: Booting SMP configuration:
Apr 19 10:49:04 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 19 10:49:04 cfd kernel: CPU1 is up
Apr 19 10:49:04 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 19 10:49:04 cfd kernel: CPU2 is up
Apr 19 10:49:04 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 19 10:49:04 cfd kernel: CPU3 is up
Apr 19 10:49:04 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 19 10:49:04 cfd kernel: ACPI: EC: interrupt unblocked
Apr 19 10:49:04 cfd kernel: ACPI: EC: event unblocked
Apr 19 10:49:04 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 19 10:49:04 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 19 10:49:04 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 19 10:49:04 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 19 10:49:04 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 10:49:04 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 10:49:04 cfd kernel: ata1.00: configured for UDMA/133
Apr 19 10:49:04 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 19 10:49:04 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 19 10:49:04 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 19 10:49:04 cfd kernel: OOM killer enabled.
Apr 19 10:49:04 cfd kernel: Restarting tasks ... 
Apr 19 10:49:04 cfd kernel: usb 1-3: USB disconnect, device number 21
Apr 19 10:49:04 cfd kernel: usb 1-3: failed to send control message: -19
Apr 19 10:49:04 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 10:49:04 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 10:49:04 cfd kernel: done.
Apr 19 10:49:04 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 19 10:49:04 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 19 10:49:04 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 19 10:49:04 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 19 10:49:04 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 19 10:49:04 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 19 10:49:04 cfd kernel: PM: suspend exit
Apr 19 10:49:04 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 19 10:49:04 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 19 10:49:05 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 19 10:49:07 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 10:49:07 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 10:49:07 cfd kernel: wlp3s0: authenticated
Apr 19 10:49:07 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 10:49:07 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 10:49:07 cfd kernel: wlp3s0: associated
Apr 19 10:49:07 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 19 10:55:04 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 19 10:55:04 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 19 10:55:06 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 10:55:06 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 10:55:06 cfd kernel: wlp3s0: authenticated
Apr 19 10:55:06 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 10:55:06 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 10:55:06 cfd kernel: wlp3s0: associated
Apr 19 11:02:19 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 19 11:02:19 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 11:02:19 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 11:02:23 cfd kernel: PM: suspend entry (deep)
Apr 19 13:28:17 cfd kernel: Filesystems sync: 0.016 seconds
Apr 19 13:28:17 cfd kernel: Freezing user space processes ... (elapsed 0.003 seconds) done.
Apr 19 13:28:17 cfd kernel: OOM killer disabled.
Apr 19 13:28:17 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 19 13:28:17 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 19 13:28:17 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 19 13:28:17 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 19 13:28:17 cfd kernel: ACPI: EC: interrupt blocked
Apr 19 13:28:17 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 19 13:28:17 cfd kernel: ACPI: EC: event blocked
Apr 19 13:28:17 cfd kernel: ACPI: EC: EC stopped
Apr 19 13:28:17 cfd kernel: PM: Saving platform NVS memory
Apr 19 13:28:17 cfd kernel: Disabling non-boot CPUs ...
Apr 19 13:28:17 cfd kernel: smpboot: CPU 1 is now offline
Apr 19 13:28:17 cfd kernel: smpboot: CPU 2 is now offline
Apr 19 13:28:17 cfd kernel: smpboot: CPU 3 is now offline
Apr 19 13:28:17 cfd kernel: ACPI: Low-level resume complete
Apr 19 13:28:17 cfd kernel: ACPI: EC: EC started
Apr 19 13:28:17 cfd kernel: PM: Restoring platform NVS memory
Apr 19 13:28:17 cfd kernel: Enabling non-boot CPUs ...
Apr 19 13:28:17 cfd kernel: x86: Booting SMP configuration:
Apr 19 13:28:17 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 19 13:28:17 cfd kernel: CPU1 is up
Apr 19 13:28:17 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 19 13:28:17 cfd kernel: CPU2 is up
Apr 19 13:28:17 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 19 13:28:17 cfd kernel: CPU3 is up
Apr 19 13:28:17 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 19 13:28:17 cfd kernel: ACPI: EC: interrupt unblocked
Apr 19 13:28:17 cfd kernel: ACPI: EC: event unblocked
Apr 19 13:28:17 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 19 13:28:17 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 19 13:28:17 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 19 13:28:17 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 19 13:28:17 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 13:28:17 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 13:28:17 cfd kernel: ata1.00: configured for UDMA/133
Apr 19 13:28:17 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 19 13:28:17 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 19 13:28:17 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 19 13:28:17 cfd kernel: OOM killer enabled.
Apr 19 13:28:17 cfd kernel: Restarting tasks ... done.
Apr 19 13:28:17 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 19 13:28:17 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 19 13:28:17 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 19 13:28:17 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 19 13:28:17 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 19 13:28:17 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 19 13:28:17 cfd kernel: PM: suspend exit
Apr 19 13:28:18 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 19 13:28:18 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 19 13:28:18 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 19 13:28:20 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 13:28:20 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 13:28:20 cfd kernel: wlp3s0: authenticated
Apr 19 13:28:20 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 13:28:20 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 13:28:20 cfd kernel: wlp3s0: associated
Apr 19 13:28:20 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 19 13:41:27 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 19 13:41:27 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 19 13:41:28 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 13:41:28 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 13:41:28 cfd kernel: wlp3s0: authenticated
Apr 19 13:41:28 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 13:41:28 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 13:41:28 cfd kernel: wlp3s0: associated
Apr 19 14:32:40 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 19 14:32:41 cfd kernel: PM: suspend entry (deep)
Apr 19 15:09:19 cfd kernel: Filesystems sync: 0.023 seconds
Apr 19 15:09:19 cfd kernel: Freezing user space processes ... (elapsed 0.265 seconds) done.
Apr 19 15:09:19 cfd kernel: OOM killer disabled.
Apr 19 15:09:19 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 19 15:09:19 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 19 15:09:19 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 19 15:09:19 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 19 15:09:19 cfd kernel: ACPI: EC: interrupt blocked
Apr 19 15:09:19 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 19 15:09:19 cfd kernel: ACPI: EC: event blocked
Apr 19 15:09:19 cfd kernel: ACPI: EC: EC stopped
Apr 19 15:09:19 cfd kernel: PM: Saving platform NVS memory
Apr 19 15:09:19 cfd kernel: Disabling non-boot CPUs ...
Apr 19 15:09:19 cfd kernel: smpboot: CPU 1 is now offline
Apr 19 15:09:19 cfd kernel: smpboot: CPU 2 is now offline
Apr 19 15:09:19 cfd kernel: IRQ 45: no longer affine to CPU3
Apr 19 15:09:19 cfd kernel: smpboot: CPU 3 is now offline
Apr 19 15:09:19 cfd kernel: ACPI: Low-level resume complete
Apr 19 15:09:19 cfd kernel: ACPI: EC: EC started
Apr 19 15:09:19 cfd kernel: PM: Restoring platform NVS memory
Apr 19 15:09:19 cfd kernel: Enabling non-boot CPUs ...
Apr 19 15:09:19 cfd kernel: x86: Booting SMP configuration:
Apr 19 15:09:19 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 19 15:09:19 cfd kernel: CPU1 is up
Apr 19 15:09:19 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 19 15:09:19 cfd kernel: CPU2 is up
Apr 19 15:09:19 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 19 15:09:19 cfd kernel: CPU3 is up
Apr 19 15:09:19 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 19 15:09:19 cfd kernel: ACPI: EC: interrupt unblocked
Apr 19 15:09:19 cfd kernel: ACPI: EC: event unblocked
Apr 19 15:09:19 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 19 15:09:19 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 19 15:09:19 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 19 15:09:19 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 15:09:19 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 19 15:09:19 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 15:09:19 cfd kernel: ata1.00: configured for UDMA/133
Apr 19 15:09:19 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 19 15:09:19 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 19 15:09:19 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 19 15:09:19 cfd kernel: OOM killer enabled.
Apr 19 15:09:19 cfd kernel: Restarting tasks ... done.
Apr 19 15:09:19 cfd kernel: PM: suspend exit
Apr 19 15:09:19 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 19 15:09:19 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 19 15:09:19 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 19 15:09:19 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 19 15:09:19 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 19 15:09:19 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 19 15:09:20 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 19 15:09:20 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 19 15:09:20 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 19 15:09:22 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 15:09:22 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 15:09:22 cfd kernel: wlp3s0: authenticated
Apr 19 15:09:22 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 15:09:22 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 15:09:22 cfd kernel: wlp3s0: associated
Apr 19 15:09:22 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 19 15:47:40 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 19 15:47:40 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 19 15:47:41 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 15:47:41 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 15:47:41 cfd kernel: wlp3s0: authenticated
Apr 19 15:47:41 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 15:47:41 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 15:47:41 cfd kernel: wlp3s0: associated
Apr 19 16:05:10 cfd kernel: perf: interrupt took too long (12533 > 10531), lowering kernel.perf_event_max_sample_rate to 15750
Apr 19 16:52:35 cfd kernel: usb 1-3: new full-speed USB device number 22 using xhci_hcd
Apr 19 16:52:35 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 16:52:35 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 16:52:35 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 16:52:35 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 16:52:35 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 16:53:15 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 16:53:56 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 16:55:11 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 16:57:25 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:03:43 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:03:43 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:03:51 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:22:33 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:22:33 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:22:33 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:22:46 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:22:46 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:23:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:23:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:23:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:24:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:24:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:24:46 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:25:59 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:25:59 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:27:19 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:36:36 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:36:36 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:38:43 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:38:44 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:38:56 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:38:58 cfd kernel: usb 1-3: USB disconnect, device number 22
Apr 19 17:38:58 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 17:38:58 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 17:39:00 cfd kernel: usb 1-1: new full-speed USB device number 23 using xhci_hcd
Apr 19 17:39:00 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 17:39:00 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 17:39:00 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 17:39:00 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 17:39:00 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 17:39:16 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:39:16 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:39:16 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:39:21 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:39:21 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:40:53 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:40:53 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:40:53 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:40:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:57 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:41:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:42:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:42:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:42:21 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:44:27 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:44:27 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:44:39 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:44:39 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:44:39 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 17:44:41 cfd kernel: usb 1-1: USB disconnect, device number 23
Apr 19 17:44:41 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 17:44:41 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 17:44:42 cfd kernel: usb 1-3: new full-speed USB device number 24 using xhci_hcd
Apr 19 17:44:43 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 17:44:43 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 17:44:43 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 17:44:43 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 17:44:43 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 17:53:32 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:53:33 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 17:53:52 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:29 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:04:29 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:07:04 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:14:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:17:44 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:18:19 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:19:01 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:22:01 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:22:01 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:22:22 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:22:22 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:22:40 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:30:36 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:32:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:32:24 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:32:34 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:32:34 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:32:34 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:32:52 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:38:01 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 18:42:21 cfd kernel: usb 1-3: USB disconnect, device number 24
Apr 19 18:42:21 cfd kernel: usb 1-3: failed to send control message: -19
Apr 19 18:42:21 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 18:42:21 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 19:14:35 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 19 19:14:36 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 19:14:36 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 19:14:40 cfd kernel: PM: suspend entry (deep)
Apr 19 21:14:31 cfd kernel: Filesystems sync: 0.040 seconds
Apr 19 21:14:31 cfd kernel: Freezing user space processes ... (elapsed 0.004 seconds) done.
Apr 19 21:14:31 cfd kernel: OOM killer disabled.
Apr 19 21:14:31 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 19 21:14:31 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 19 21:14:31 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 19 21:14:31 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 19 21:14:31 cfd kernel: ACPI: EC: interrupt blocked
Apr 19 21:14:31 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 19 21:14:31 cfd kernel: ACPI: EC: event blocked
Apr 19 21:14:31 cfd kernel: ACPI: EC: EC stopped
Apr 19 21:14:31 cfd kernel: PM: Saving platform NVS memory
Apr 19 21:14:31 cfd kernel: Disabling non-boot CPUs ...
Apr 19 21:14:31 cfd kernel: smpboot: CPU 1 is now offline
Apr 19 21:14:31 cfd kernel: smpboot: CPU 2 is now offline
Apr 19 21:14:31 cfd kernel: IRQ 45: no longer affine to CPU3
Apr 19 21:14:31 cfd kernel: smpboot: CPU 3 is now offline
Apr 19 21:14:31 cfd kernel: ACPI: Low-level resume complete
Apr 19 21:14:31 cfd kernel: ACPI: EC: EC started
Apr 19 21:14:31 cfd kernel: PM: Restoring platform NVS memory
Apr 19 21:14:31 cfd kernel: Enabling non-boot CPUs ...
Apr 19 21:14:31 cfd kernel: x86: Booting SMP configuration:
Apr 19 21:14:31 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 19 21:14:31 cfd kernel: CPU1 is up
Apr 19 21:14:31 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 19 21:14:31 cfd kernel: CPU2 is up
Apr 19 21:14:31 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 19 21:14:31 cfd kernel: CPU3 is up
Apr 19 21:14:31 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 19 21:14:31 cfd kernel: ACPI: EC: interrupt unblocked
Apr 19 21:14:31 cfd kernel: ACPI: EC: event unblocked
Apr 19 21:14:31 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 19 21:14:31 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 19 21:14:31 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 19 21:14:31 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 21:14:31 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 19 21:14:31 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 21:14:31 cfd kernel: ata1.00: configured for UDMA/133
Apr 19 21:14:31 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 19 21:14:31 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 19 21:14:31 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 19 21:14:31 cfd kernel: OOM killer enabled.
Apr 19 21:14:31 cfd kernel: Restarting tasks ... done.
Apr 19 21:14:31 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 19 21:14:31 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 19 21:14:31 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 19 21:14:31 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 19 21:14:31 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 19 21:14:31 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 19 21:14:31 cfd kernel: PM: suspend exit
Apr 19 21:14:32 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 19 21:14:32 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 19 21:14:32 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 19 21:14:34 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 21:14:34 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 21:14:34 cfd kernel: wlp3s0: authenticated
Apr 19 21:14:34 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 21:14:34 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 21:14:34 cfd kernel: wlp3s0: associated
Apr 19 21:14:34 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 19 21:15:04 cfd kernel: usb 1-1: new full-speed USB device number 25 using xhci_hcd
Apr 19 21:15:05 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 21:15:05 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 21:15:05 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 21:15:05 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 21:15:05 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 21:15:44 cfd kernel: usb 1-1: USB disconnect, device number 25
Apr 19 21:15:44 cfd kernel: usb 1-1: failed to send control message: -19
Apr 19 21:15:44 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 21:15:44 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 21:24:32 cfd kernel: rtlwifi: AP off, try to reconnect now
Apr 19 21:24:32 cfd kernel: wlp3s0: Connection to AP 9c:80:df:0b:6f:e8 lost
Apr 19 21:24:33 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 21:24:33 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 21:24:33 cfd kernel: wlp3s0: authenticated
Apr 19 21:24:33 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 21:24:33 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 21:24:33 cfd kernel: wlp3s0: associated
Apr 19 21:37:21 cfd kernel: usb 1-3: new full-speed USB device number 26 using xhci_hcd
Apr 19 21:37:22 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 21:37:22 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 21:37:22 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 21:37:22 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 21:37:22 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 21:37:31 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:37:31 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:37:31 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:37:34 cfd kernel: usb 1-3: USB disconnect, device number 26
Apr 19 21:37:34 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 21:37:34 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 21:37:39 cfd kernel: usb 1-3: new full-speed USB device number 27 using xhci_hcd
Apr 19 21:37:39 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 21:37:39 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 21:37:39 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 21:37:39 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 21:37:39 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 21:37:49 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:39:34 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:42:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:42:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:44:04 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:44:04 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:44:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:44:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:44:14 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 19 21:44:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:45:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:45:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:45:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:45:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:47:07 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:47:07 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:49:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:49:18 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:51:12 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:22 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:33 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:33 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:44 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:44 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:44 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:44 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 21:53:46 cfd kernel: usb 1-3: USB disconnect, device number 27
Apr 19 21:53:46 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 21:53:46 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 21:53:48 cfd kernel: usb 1-1: new full-speed USB device number 28 using xhci_hcd
Apr 19 21:53:48 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 21:53:48 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 21:53:48 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 21:53:48 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 21:53:48 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 21:54:01 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:01 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:01 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:04 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:54:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:55:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:55:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:55:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:55:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:33 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:34 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:34 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:43 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:57:59 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:43 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:43 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:58:44 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:59:09 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:59:09 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:59:09 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:59:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 21:59:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:01:53 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:01 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:01 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:01 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:07 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:13 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:13 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:13 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:13 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:14 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:15 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:02:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:03:04 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:03:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:03:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:03:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:03:05 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:03:13 cfd kernel: usb 1-1: USB disconnect, device number 28
Apr 19 22:03:13 cfd kernel: usb 1-1: failed to send control message: -19
Apr 19 22:03:13 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 22:03:13 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 22:03:15 cfd kernel: usb 1-3: new full-speed USB device number 29 using xhci_hcd
Apr 19 22:03:15 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 22:03:15 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 22:03:15 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 22:03:15 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 22:03:15 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 22:03:32 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:07:41 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:07:41 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:09:38 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:39 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:39 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:39 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:40 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:49 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:49 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:50 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:10:50 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:13:24 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:13:51 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:14:09 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:15:56 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:16:03 cfd kernel: usb 1-3: USB disconnect, device number 29
Apr 19 22:16:03 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 22:16:03 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 22:16:04 cfd kernel: usb 1-1: new full-speed USB device number 30 using xhci_hcd
Apr 19 22:16:04 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 22:16:04 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 22:16:04 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 22:16:04 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 22:16:04 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 22:16:17 cfd kernel: usb 1-1: USB disconnect, device number 30
Apr 19 22:16:17 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 22:16:17 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 22:16:20 cfd kernel: usb 1-1: new full-speed USB device number 31 using xhci_hcd
Apr 19 22:16:20 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 22:16:20 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 22:16:20 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 22:16:20 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 22:16:20 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 22:16:31 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:16:31 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:16:31 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:32 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:32 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:32 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:32 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:32 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:49 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:49 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:49 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:19:49 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:06 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:06 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:06 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:06 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:06 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:11 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:19 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:20 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:20 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:20 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:21:20 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:22:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:22:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:22:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:22:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:22:51 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:23:07 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:23:07 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:23:07 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:23:07 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:23:07 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:23:10 cfd kernel: usb 1-1: USB disconnect, device number 31
Apr 19 22:23:10 cfd kernel: usb 1-1: failed to send control message: -19
Apr 19 22:23:10 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 22:23:10 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 22:23:12 cfd kernel: usb 1-3: new full-speed USB device number 32 using xhci_hcd
Apr 19 22:23:12 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 22:23:12 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 22:23:12 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 22:23:12 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 22:23:12 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 22:23:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:24:00 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:25:21 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:25:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:25:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:25:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:25:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:26:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:26:14 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:26:20 cfd kernel: usb 1-3: USB disconnect, device number 32
Apr 19 22:26:20 cfd kernel: usb 1-3: failed to send control message: -19
Apr 19 22:26:20 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 22:26:20 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 22:26:25 cfd kernel: usb 1-3: new full-speed USB device number 33 using xhci_hcd
Apr 19 22:26:25 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 22:26:25 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 22:26:25 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 22:26:25 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 22:26:25 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0
Apr 19 22:26:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:26:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:28:23 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:28:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:28:42 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:30:31 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:33:06 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:34:24 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:34:25 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:36:01 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:37:13 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:38:16 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:38:16 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:38:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:38:35 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:19 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:19 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:19 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:20 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:20 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:20 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:30 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:41:30 cfd kernel: ch341-uart ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71
Apr 19 22:41:38 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:43:55 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:08 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:09 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:25 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:25 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:37 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:37 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:37 cfd kernel: usb 1-3: failed to send control message: -71
Apr 19 22:45:40 cfd kernel: usb 1-3: USB disconnect, device number 33
Apr 19 22:45:40 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 22:45:40 cfd kernel: ch341 1-3:1.0: device disconnected
Apr 19 22:45:42 cfd kernel: usb 1-1: new full-speed USB device number 34 using xhci_hcd
Apr 19 22:45:42 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 22:45:42 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 22:45:42 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 22:45:42 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 22:45:42 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 22:45:56 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:45:56 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:45:56 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:45:56 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:29 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:30 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:43 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:43 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:44 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:44 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:47:58 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:49:28 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:50:23 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 22:50:23 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:04:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:04:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:04:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:04:17 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:05:56 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:06:03 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:06:03 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:06:03 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:09:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:09:55 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:40 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:40 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:10:54 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:11:19 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:29:00 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:29:25 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:29:25 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:30:24 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:08 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:10 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:18 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:18 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:18 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:18 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:18 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:33:46 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:34:05 cfd kernel: wlp3s0: deauthenticating from 9c:80:df:0b:6f:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
Apr 19 23:34:06 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 23:34:06 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 23:34:06 cfd kernel: usb 1-1: USB disconnect, device number 34
Apr 19 23:34:06 cfd kernel: usb 1-1: failed to send control message: -19
Apr 19 23:34:06 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 23:34:06 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 23:34:10 cfd kernel: PM: suspend entry (deep)
Apr 19 23:34:10 cfd kernel: Filesystems sync: 0.029 seconds
Apr 19 23:56:49 cfd kernel: Freezing user space processes ... (elapsed 0.004 seconds) done.
Apr 19 23:56:49 cfd kernel: OOM killer disabled.
Apr 19 23:56:49 cfd kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Apr 19 23:56:49 cfd kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Apr 19 23:56:49 cfd kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 19 23:56:49 cfd kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 19 23:56:49 cfd kernel: ACPI: EC: interrupt blocked
Apr 19 23:56:49 cfd kernel: ACPI: Preparing to enter system sleep state S3
Apr 19 23:56:49 cfd kernel: ACPI: EC: event blocked
Apr 19 23:56:49 cfd kernel: ACPI: EC: EC stopped
Apr 19 23:56:49 cfd kernel: PM: Saving platform NVS memory
Apr 19 23:56:49 cfd kernel: Disabling non-boot CPUs ...
Apr 19 23:56:49 cfd kernel: IRQ 50: no longer affine to CPU1
Apr 19 23:56:49 cfd kernel: smpboot: CPU 1 is now offline
Apr 19 23:56:49 cfd kernel: smpboot: CPU 2 is now offline
Apr 19 23:56:49 cfd kernel: IRQ 19: no longer affine to CPU3
Apr 19 23:56:49 cfd kernel: IRQ 42: no longer affine to CPU3
Apr 19 23:56:49 cfd kernel: IRQ 43: no longer affine to CPU3
Apr 19 23:56:49 cfd kernel: IRQ 44: no longer affine to CPU3
Apr 19 23:56:49 cfd kernel: smpboot: CPU 3 is now offline
Apr 19 23:56:49 cfd kernel: ACPI: Low-level resume complete
Apr 19 23:56:49 cfd kernel: ACPI: EC: EC started
Apr 19 23:56:49 cfd kernel: PM: Restoring platform NVS memory
Apr 19 23:56:49 cfd kernel: Enabling non-boot CPUs ...
Apr 19 23:56:49 cfd kernel: x86: Booting SMP configuration:
Apr 19 23:56:49 cfd kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Apr 19 23:56:49 cfd kernel: CPU1 is up
Apr 19 23:56:49 cfd kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Apr 19 23:56:49 cfd kernel: CPU2 is up
Apr 19 23:56:49 cfd kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Apr 19 23:56:49 cfd kernel: CPU3 is up
Apr 19 23:56:49 cfd kernel: ACPI: Waking up from system sleep state S3
Apr 19 23:56:49 cfd kernel: ACPI: EC: interrupt unblocked
Apr 19 23:56:49 cfd kernel: ACPI: EC: event unblocked
Apr 19 23:56:49 cfd kernel: usb usb1: root hub lost power or was reset
Apr 19 23:56:49 cfd kernel: usb usb2: root hub lost power or was reset
Apr 19 23:56:49 cfd kernel: sd 0:0:0:0: [sda] Starting disk
Apr 19 23:56:49 cfd kernel: rtlwifi: rtlwifi: wireless switch is on
Apr 19 23:56:49 cfd kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Apr 19 23:56:49 cfd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 19 23:56:49 cfd kernel: ata2.00: configured for UDMA/133
Apr 19 23:56:49 cfd kernel: usb 1-4: reset full-speed USB device number 2 using xhci_hcd
Apr 19 23:56:49 cfd kernel: ata1.00: configured for UDMA/133
Apr 19 23:56:49 cfd kernel: ahci 0000:00:1f.2: port does not support device sleep
Apr 19 23:56:49 cfd kernel: ata1.00: Enabling discard_zeroes_data
Apr 19 23:56:49 cfd kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
Apr 19 23:56:49 cfd kernel: OOM killer enabled.
Apr 19 23:56:49 cfd kernel: Restarting tasks ... done.
Apr 19 23:56:49 cfd kernel: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Apr 19 23:56:49 cfd kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1
Apr 19 23:56:49 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
Apr 19 23:56:49 cfd kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
Apr 19 23:56:49 cfd kernel: bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Apr 19 23:56:49 cfd kernel: Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
Apr 19 23:56:49 cfd kernel: PM: suspend exit
Apr 19 23:56:49 cfd kernel: RTL8208 Fast Ethernet r8169-0-202:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-0-202:00, irq=IGNORE)
Apr 19 23:56:49 cfd kernel: r8169 0000:02:00.2 enp2s0f2: Link is Down
Apr 19 23:56:49 cfd kernel: Bluetooth: hci0: RTL: fw version 0x0e2f9f73
Apr 19 23:56:51 cfd kernel: wlp3s0: authenticate with 9c:80:df:0b:6f:e8
Apr 19 23:56:51 cfd kernel: wlp3s0: send auth to 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 23:56:51 cfd kernel: wlp3s0: authenticated
Apr 19 23:56:51 cfd kernel: wlp3s0: associate with 9c:80:df:0b:6f:e8 (try 1/3)
Apr 19 23:56:51 cfd kernel: wlp3s0: RX AssocResp from 9c:80:df:0b:6f:e8 (capab=0x411 status=0 aid=16)
Apr 19 23:56:51 cfd kernel: wlp3s0: associated
Apr 19 23:56:51 cfd kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Apr 19 23:57:04 cfd kernel: usb 1-1: new full-speed USB device number 35 using xhci_hcd
Apr 19 23:57:04 cfd kernel: usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 23:57:04 cfd kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 19 23:57:04 cfd kernel: usb 1-1: Product: USB2.0-Ser!
Apr 19 23:57:04 cfd kernel: ch341 1-1:1.0: ch341-uart converter detected
Apr 19 23:57:04 cfd kernel: usb 1-1: ch341-uart converter now attached to ttyUSB0
Apr 19 23:57:34 cfd kernel: usb 1-1: failed to send control message: -71
Apr 19 23:57:41 cfd kernel: usb 1-1: USB disconnect, device number 35
Apr 19 23:57:41 cfd kernel: ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
Apr 19 23:57:41 cfd kernel: ch341 1-1:1.0: device disconnected
Apr 19 23:57:42 cfd kernel: usb 1-3: new full-speed USB device number 36 using xhci_hcd
Apr 19 23:57:42 cfd kernel: usb 1-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
Apr 19 23:57:42 cfd kernel: usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 
Apr 19 23:57:42 cfd kernel: usb 1-3: Product: USB2.0-Ser!
Apr 19 23:57:42 cfd kernel: ch341 1-3:1.0: ch341-uart converter detected
Apr 19 23:57:42 cfd kernel: usb 1-3: ch341-uart converter now attached to ttyUSB0

Hier noch der Hinweis, dass ich öfter mal den USB Port gewechselt hatte. DIe Baudrate hatte ich auch schon mal heruntergesetzt und dann meinte ich sogar verbesserung gesehen zu haben, bis die Fehler wieder aufgetaucht sind. DIe USB Kabel die ich hier liegen habe sind bestimmt nicht gut geschirmt. Standard Ladekabel von Handys.

shiro

Anmeldungsdatum:
20. Juli 2020

Beiträge: 611
Zitieren
20. April 2022 14:53 (zuletzt bearbeitet: 20. April 2022 15:11)

Verwende Arduino IDE 1.8.19 - Installiert durch apt get install

Die Version ist OK.

dmesg oder "journalctl -k"

Oh je, da tauchen ja neben den -71 auch noch -19 Fehler auf. Dein USB Link müsste von "QinHeng Electronics" sein. Detailliertere Informtionen würdest du aber bekommen, wenn du dir die Ausgabe von 

udevadm info -n /dev/ttyUSB0

mal anschaust. Eigentlich müssten die Standard Ubuntu Driver für die CH340 Chips funktionieren. Aber eventuell hilft dieser Post weiter.

Hinsichtlich der Auswertung deiner Listings ist

  • positiv: Der Fehler wandert mit den USB-Ports (usb 1-3, usb 1-1) mit. Das bedeutet, dass wahrscheinlich die USB Ports auf deinem Rechner ok sind.

  • negativ: Es ist nicht klar, ob der Fehler am USB-Kabel oder am CH341 Chip bzw der auf dem Wemos implementierten seriellen Schnittstelle liegt.

Den -19 Fehler hatte ich mal bei einem sehr langen USB Kabel (2m) auch (da lag dann wohl Übersprechen mit Resets der seriellen Schnittstelle vor). Für die Programmierung meiner Arduinos über tty verwende ich gut abgeschirmte USB Kabel mit einer Länge von ca 20cm. Allerdings ist auch ein Fehlverhalten des Wemos nicht auszuschließen (ich hatte von einem User gehört, dass er von 5 gekauften Wemos nur einen nutzen konnte).

Um das Problem weiter zu isolieren, sollte mit einem sehr kurzen (z.B. 10cm) langen, gut geschirmten USB Kabel getestet werden, ob das Problem am Wemos oder am Kabel liegt. Sollte sich heraus stellen, dass auch mit kurzem Kabel die Fehler weiterhin auftreten (speziell ein -19), dann würde viel auf den Wemos hin deuten. Bevor du ihn aber weg schmeißt kannst du dir ja überlegen, ob du ihn nicht mittels OTA beschreibst. Dann brauchst du kein Kabel mehr sondern nutzt die IP Kopplung. Vorher muss natürlich der OTA Lader einmal über die serielle Schnittstelle geladen werden.

Shor-ty

(Themenstarter)

Anmeldungsdatum:
10. September 2010

Beiträge: 714
Zitieren
20. April 2022 16:32

Hey shiro,

richtig. Da tauchen ganz viele so Fehler auf. Seit Beginn und ab und an gehts dann wieder über ne Stunde ohne Probleme und dann fängt es wieder an. Ich tippe eher auf das Kabel, da ich bereits 5 Chips durch hab. Natürlich will ich das nicht ausschließen, dass es an denen liegt (auch Chinaware).

Was für ein Kabel würdest Du mir den empfehlen? 3-Fach geschirmt? Hab da eins gesehen, hat auch nur 15 cm Länge. Ist zwar dann etwas unhandlich, wenn das Kabel doch ziemlich kurz ist, aber wenns daran liegt. Alternativ könnte ich nen 0.5m 2x geschirmt testen. Muss mir aber - für was auch immer ich mich entscheide - erstmal eins kaufen.

Danke für Deinen Support, Tobi

shiro

Anmeldungsdatum:
20. Juli 2020

Beiträge: 611
Zitieren
20. April 2022 17:06

Alternativ könnte ich nen 0.5m 2x geschirmt testen.

Bevor du dir was kaufst, würde ich auch den 0,5m erst mal testen. Wenn du ein kurzes Kabel kaufst, pass auf, dass es ein Datenkabel und kein Ladekabel ist. Die meisten kurzen sind nämlich Ladekabel. Aber das weißt du sicherlich.

Shor-ty

(Themenstarter)

Anmeldungsdatum:
10. September 2010

Beiträge: 714
Zitieren
20. April 2022 17:22

Hab mich wohl falsch ausgedrückt ☺

Ich hab hier glaub nur ganz normale 0-8-15 Ladekabel. Wahrscheinlich macht es deswegen so viele Probleme. Heißt, ich müsste mir sowieso eins kaufen, daher auch die Frage, welches Du empfehlen kannst (man kauft ja eh nur eins ☺ )

shiro

Anmeldungsdatum:
20. Juli 2020

Beiträge: 611
Zitieren
20. April 2022 18:16

welches Du empfehlen kannst

Soviel ich weiß, hat der "Wemos D1 Mini" eine "Micro USB Buchse". Da sollte durchaus so ein einfaches Kabel funktionieren.

Shor-ty

(Themenstarter)

Anmeldungsdatum:
10. September 2010

Beiträge: 714
Zitieren
20. Juni 2022 20:46

Hey,

wollte mal Rückmeldung geben. Ich hab ein 20cm Datenkabel (2-fach geschirmet) gekauft. Hab immer noch das Problem. Da ich an meinem Desktop-PC gar nichts zu laufen bekomme, gehe ich davon aus, dass es wahrscheinlich die Billig-Chips von China sind. Ich hab sonst keinen Plan mehr.

Ich setzt das mal als gelöst, da ich ja meine Daten übertragen kann (wenn auch ziemlich nervig, dass es nicht immer auf anhieb klappt). Danke nochmals für Deine Unterstützung, Tobi

shiro

Anmeldungsdatum:
20. Juli 2020

Beiträge: 611
Zitieren
20. Juni 2022 21:06

... dass es wahrscheinlich die Billig-Chips von China sind.

Das vermute ich leider auch. Damit du den D1 noch nutzen kannst, würde ich im Arduino IDE unter "Werkzeuge" bei "Flash Size" eine Aufteilung wählen, bei der ein bisschen RAM für OTA reserviert wird. Dann kann man unter "Port" eine "Netzwerk Schnittstelle" wählen. In deinem ".ino" Quelltext musst du dann natürlich die OTA Funktionen nutzen. Unter "Datei" → "Beispiele" → "ArduinoOTA" → "BasicOTA" kannst du dir anschauen, wie man das implementiert.

Aus meiner Sicht wäre es einen Versuch wert.

Shor-ty

(Themenstarter)

Anmeldungsdatum:
10. September 2010

Beiträge: 714
Zitieren
24. Juni 2022 19:29

Hey Shiro und alle zusammen,

ich wollte mal kurze mitteilen an was es bei mir tatsächlich lag.

  • Laptop

Ich hab mir vorgestern, nen neuen Laptop geholt. Hab jetzt die Kiste mal etwas eingerichtet und Arduino installiert. Zuerste wurde ttyUSB0 immer ausgehängt (hier muss ich zunächst das brltty deinstallieren). Anschließend konnte ich den Port in Arduino auswählen aber ich hab dann immer eine "Permission denied" bekommen.

Mir ist dann aufgefallen, dass 

/dev/ttyUSB0

in der Gruppe dialout ist. Diese habe ich dann noch meinem Benutzer hinzugefügt (die tty war bereits drin) und seitdem ist jeder Flash geglückt. Entsprechend gehe ich davon aus, dass mein alter Laptop irgendwie ein Problem hatte. Somit war die ganze Fehlersuche umsonst. Komisches Zeug aber joa. Anscheinend wars tatsächlich der Laptop.

Grüße Tobi
Antworten |