Ich habe einen HP Compaq auf dem drei Linuxdistributionen installiert sind sudo parted -l zeigt
Modell: ATA ST3160815AS (scsi) Festplatte /dev/sda: 160GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: msdos Disk-Flags: Nummer Anfang Ende Größe Typ Dateisystem Flags 1 1049kB 47,8GB 47,8GB primary ext4 boot 3 47,8GB 160GB 112GB extended 5 47,8GB 156GB 108GB logical ext4 6 156GB 160GB 4209MB logical linux-swap(v1) Modell: ATA Samsung SSD 750 (scsi) Festplatte /dev/sdb: 250GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: msdos Disk-Flags: Nummer Anfang Ende Größe Typ Dateisystem Flags 1 1049kB 512MB 511MB primary fat32 boot, esp 2 513MB 250GB 250GB extended 6 513MB 242GB 241GB logical ext4 5 242GB 250GB 8553MB logical linux-swap(v1)
Früher konnte ich im Bootmenü von grub auswählen, welches Linux startet. Seit einem Update von 22.04, das auf sdb6 installiert ist, wird aber immer dieses gestartet.
Ein sudo grub-install /dev/sda hat nichts daran geändert.
sudo dmesg
[ 0.000000] microcode: microcode updated early to revision 0xba, date = 2010-10-03
[ 0.000000] Linux version 5.15.0-22-generic (buildd@lcy02-amd64-060) (gcc (Ubuntu 11.2.0-16ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37.90.20220207) #22-Ubuntu SMP Tue Feb 8 10:16:30 UTC 2022 (Ubuntu 5.15.0-22.22-generic 5.15.19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-22-generic root=UUID=bc11a38f-b818-4846-b03f-7658629f496f ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000defafdff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000defafe00-0x00000000defb1dff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000defb1ea0-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7800p Small Form Factor/0AA8h, BIOS 786F1 v01.24 03/18/2008
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2660.009 MHz processor
[ 0.000639] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000644] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000650] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.001361] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001859] total RAM covered: 4080M
[ 0.002098] Found optimal setting for mtrr clean up
[ 0.002099] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
[ 0.002881] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[ 0.002893] last_pfn = 0xdefaf max_arch_pfn = 0x400000000
[ 0.012397] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff]
[ 0.012646] RAMDISK: [mem 0x30b13000-0x34580fff]
[ 0.012654] ACPI: Early table checksum verification disabled
[ 0.012659] ACPI: RSDP 0x00000000000E5C10 000014 (v00 COMPAQ)
[ 0.012665] ACPI: RSDT 0x00000000DEFC1E40 000044 (v01 HPQOEM SLIC-BPC 20080318 00000000)
[ 0.012673] ACPI: FACP 0x00000000DEFC1EE8 000074 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012681] ACPI: DSDT 0x00000000DEFC2427 00A57F (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.012686] ACPI: FACS 0x00000000DEFC1E00 000040
[ 0.012691] ACPI: APIC 0x00000000DEFC1F5C 000084 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012696] ACPI: ASF! 0x00000000DEFC1FE0 000063 (v32 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012702] ACPI: MCFG 0x00000000DEFC2043 00003C (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012707] ACPI: TCPA 0x00000000DEFC207F 000032 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012712] ACPI: SLIC 0x00000000DEFC20B1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.012717] ACPI: HPET 0x00000000DEFC2227 000038 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012722] ACPI: DMAR 0x00000000DEFC225F 000198 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.012726] ACPI: Reserving FACP table memory at [mem 0xdefc1ee8-0xdefc1f5b]
[ 0.012728] ACPI: Reserving DSDT table memory at [mem 0xdefc2427-0xdefcc9a5]
[ 0.012729] ACPI: Reserving FACS table memory at [mem 0xdefc1e00-0xdefc1e3f]
[ 0.012731] ACPI: Reserving APIC table memory at [mem 0xdefc1f5c-0xdefc1fdf]
[ 0.012732] ACPI: Reserving ASF! table memory at [mem 0xdefc1fe0-0xdefc2042]
[ 0.012734] ACPI: Reserving MCFG table memory at [mem 0xdefc2043-0xdefc207e]
[ 0.012735] ACPI: Reserving TCPA table memory at [mem 0xdefc207f-0xdefc20b0]
[ 0.012736] ACPI: Reserving SLIC table memory at [mem 0xdefc20b1-0xdefc2226]
[ 0.012738] ACPI: Reserving HPET table memory at [mem 0xdefc2227-0xdefc225e]
[ 0.012739] ACPI: Reserving DMAR table memory at [mem 0xdefc225f-0xdefc23f6]
[ 0.013199] No NUMA configuration found
[ 0.013201] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.013213] NODE_DATA(0) allocated [mem 0x11ffd2000-0x11fffbfff]
[ 0.013649] Zone ranges:
[ 0.013650] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013653] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013655] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.013657] Device empty
[ 0.013659] Movable zone start for each node
[ 0.013663] Early memory node ranges
[ 0.013664] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.013666] node 0: [mem 0x0000000000100000-0x00000000defaefff]
[ 0.013668] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.013670] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.013677] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013732] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.048334] On node 0, zone Normal: 4177 pages in unavailable ranges
[ 0.048347] Reserving Intel graphics memory at [mem 0xdf800000-0xdfffffff]
[ 0.048491] ACPI: PM-Timer IO Port: 0xf808
[ 0.048508] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.048512] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.048513] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.048515] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.048527] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.048531] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.048534] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.048539] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.048541] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.048549] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.048567] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.048569] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.048571] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.048572] PM: hibernation: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.048574] PM: hibernation: Registered nosave memory: [mem 0xdefaf000-0xdefaffff]
[ 0.048575] PM: hibernation: Registered nosave memory: [mem 0xdefb0000-0xdefb0fff]
[ 0.048577] PM: hibernation: Registered nosave memory: [mem 0xdefb1000-0xdefb1fff]
[ 0.048578] PM: hibernation: Registered nosave memory: [mem 0xdefb2000-0xdfffffff]
[ 0.048579] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf3ffffff]
[ 0.048580] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[ 0.048581] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.048583] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
[ 0.048584] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.048585] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[ 0.048588] [mem 0xe0000000-0xf3ffffff] available for PCI devices
[ 0.048589] Booting paravirtualized kernel on bare hardware
[ 0.048594] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.048606] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.049335] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[ 0.049345] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[ 0.049350] pcpu-alloc: [0] 0 1 2 3
[ 0.049394] Built 1 zonelists, mobility grouping on. Total pages: 1027824
[ 0.049399] Policy zone: Normal
[ 0.049401] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-22-generic root=UUID=bc11a38f-b818-4846-b03f-7658629f496f ro quiet splash vt.handoff=7
[ 0.049510] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-22-generic", will be passed to user space.
[ 0.050534] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.051084] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.051160] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.104737] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: Hewlett-Packard; Ver: 786F1 v01.24; Product Version:
[ 0.142263] Memory: 3934208K/4177204K available (16393K kernel code, 4385K rwdata, 10772K rodata, 2956K init, 4796K bss, 242736K reserved, 0K cma-reserved)
[ 0.142278] random: get_random_u64 called from kmem_cache_open+0x2b/0x320 with crng_init=0
[ 0.142539] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.142563] Kernel/User page tables isolation: enabled
[ 0.142596] ftrace: allocating 50454 entries in 198 pages
[ 0.162968] ftrace: allocated 198 pages with 4 groups
[ 0.163187] rcu: Hierarchical RCU implementation.
[ 0.163190] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.163192] Rude variant of Tasks RCU enabled.
[ 0.163193] Tracing variant of Tasks RCU enabled.
[ 0.163194] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.163196] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.168519] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.168797] Console: colour dummy device 80x25
[ 0.168814] printk: console [tty0] enabled
[ 0.168842] ACPI: Core revision 20210730
[ 0.168946] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.168962] APIC: Switch to symmetric I/O mode setup
[ 0.168965] DMAR: Host address width 36
[ 0.168967] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.168978] DMAR: Failed to map dmar0
[ 0.168983] DMAR: Parse DMAR table failure.
[ 0.169348] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.188961] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2657ac41b0b, max_idle_ns: 440795248817 ns
[ 0.188970] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.01 BogoMIPS (lpj=10640036)
[ 0.188974] pid_max: default: 32768 minimum: 301
[ 0.189007] LSM: Security Framework initializing
[ 0.189022] landlock: Up and running.
[ 0.189023] Yama: becoming mindful.
[ 0.189065] AppArmor: AppArmor initialized
[ 0.189114] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.189135] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.189478] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.189487] CPU0: Thermal monitoring enabled (TM2)
[ 0.189498] process: using mwait in idle threads
[ 0.189502] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.189504] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.189509] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.189511] Spectre V2 : Mitigation: Full generic retpoline
[ 0.189512] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.189514] Speculative Store Bypass: Vulnerable
[ 0.189518] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.195123] Freeing SMP alternatives memory: 40K
[ 0.306059] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (family: 0x6, model: 0xf, stepping: 0xb)
[ 0.306260] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.306270] core: PEBS disabled due to CPU errata
[ 0.306272] ... version: 2
[ 0.306273] ... bit width: 40
[ 0.306274] ... generic registers: 2
[ 0.306275] ... value mask: 000000ffffffffff
[ 0.306276] ... max period: 000000007fffffff
[ 0.306278] ... fixed-purpose events: 3
[ 0.306279] ... event mask: 0000000700000003
[ 0.306413] rcu: Hierarchical SRCU implementation.
[ 0.307151] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.307239] smp: Bringing up secondary CPUs ...
[ 0.307403] x86: Booting SMP configuration:
[ 0.307404] .... node #0, CPUs: #1
[ 0.311012] smp: Brought up 1 node, 2 CPUs
[ 0.311012] smpboot: Max logical packages: 2
[ 0.311012] smpboot: Total of 2 processors activated (10640.03 BogoMIPS)
[ 0.313272] devtmpfs: initialized
[ 0.313272] x86/mm: Memory block size: 128MB
[ 0.313641] ACPI: PM: Registering ACPI NVS region [mem 0xdefafe00-0xdefb1dff] (8192 bytes)
[ 0.313641] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.313641] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.313641] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.313641] pinctrl core: initialized pinctrl subsystem
[ 0.313641] PM: RTC time: 08:46:59, date: 2022-03-17
[ 0.313641] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.313641] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.313718] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.313802] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.313817] audit: initializing netlink subsys (disabled)
[ 0.313836] audit: type=2000 audit(1647506819.144:1): state=initialized audit_enabled=0 res=1
[ 0.313836] thermal_sys: Registered thermal governor 'fair_share'
[ 0.313836] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.313836] thermal_sys: Registered thermal governor 'step_wise'
[ 0.313836] thermal_sys: Registered thermal governor 'user_space'
[ 0.313836] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.313836] EISA bus registered
[ 0.313836] cpuidle: using governor ladder
[ 0.313836] cpuidle: using governor menu
[ 0.313836] ACPI: bus type PCI registered
[ 0.313836] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.313836] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.313836] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.313836] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[ 0.313836] PCI: Using configuration type 1 for base access
[ 0.317778] Kprobes globally optimized
[ 0.317785] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.317785] fbcon: Taking over console
[ 0.317785] ACPI: Added _OSI(Module Device)
[ 0.317785] ACPI: Added _OSI(Processor Device)
[ 0.317785] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.317785] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.317785] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.317785] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.317785] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.324174] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.327879] ACPI: Dynamic OEM Table Load:
[ 0.327887] ACPI: SSDT 0xFFFF97F480918800 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.328544] ACPI: Dynamic OEM Table Load:
[ 0.328550] ACPI: SSDT 0xFFFF97F480263000 00017C (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.329606] ACPI: Interpreter enabled
[ 0.329630] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.329632] ACPI: Using IOAPIC for interrupt routing
[ 0.329663] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.332235] ACPI: Enabled 12 GPEs in block 00 to 3F
[ 0.342932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.342942] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.342949] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20210730/nsarguments-162)
[ 0.343046] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20210730/dsfield-184)
[ 0.343056] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20210730/dswload2-477)
[ 0.343064]
Initialized Local Variables for Method [_OSC]:
[ 0.343066] Local0: (____ptrval____) <Obj> Integer 0000000000000001
[ 0.343072] Local1: (____ptrval____) <Obj> Integer 0000000000000005
[ 0.343078] Initialized Arguments for Method [_OSC]: (5 arguments defined for method invocation)
[ 0.343080] Arg0: (____ptrval____) <Obj> Buffer(16) 5B 4D DB 33 F7 1F 1C 40
[ 0.343091] Arg1: (____ptrval____) <Obj> Integer 0000000000000001
[ 0.343096] Arg2: (____ptrval____) <Obj> Integer 0000000000000003
[ 0.343101] Arg3: (____ptrval____) <Obj> Buffer(12) 01 00 00 00 1F 01 00 00
[ 0.343113] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20210730/psparse-529)
[ 0.343128] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ALREADY_EXISTS)
[ 0.343140] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.343728] PCI host bridge to bus 0000:00
[ 0.343732] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.343735] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.343738] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
[ 0.343740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.343742] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff window]
[ 0.343744] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[ 0.343746] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.343811] pci 0000:00:00.0: [8086:29b0] type 00 class 0x060000
[ 0.344043] pci 0000:00:02.0: [8086:29b2] type 00 class 0x030000
[ 0.344051] pci 0000:00:02.0: reg 0x10: [mem 0xf0100000-0xf017ffff]
[ 0.344057] pci 0000:00:02.0: reg 0x14: [io 0x2210-0x2217]
[ 0.344061] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[ 0.344066] pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
[ 0.344083] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.344225] pci 0000:00:03.0: [8086:29b4] type 00 class 0x078000
[ 0.344238] pci 0000:00:03.0: reg 0x10: [mem 0xf0185900-0xf018590f 64bit]
[ 0.344284] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.344447] pci 0000:00:03.2: [8086:29b6] type 00 class 0x010185
[ 0.344458] pci 0000:00:03.2: reg 0x10: [io 0x2218-0x221f]
[ 0.344465] pci 0000:00:03.2: reg 0x14: [io 0x2250-0x2253]
[ 0.344471] pci 0000:00:03.2: reg 0x18: [io 0x2220-0x2227]
[ 0.344478] pci 0000:00:03.2: reg 0x1c: [io 0x2254-0x2257]
[ 0.344484] pci 0000:00:03.2: reg 0x20: [io 0x21c0-0x21cf]
[ 0.344664] pci 0000:00:03.3: [8086:29b7] type 00 class 0x070002
[ 0.344676] pci 0000:00:03.3: reg 0x10: [io 0x2228-0x222f]
[ 0.344682] pci 0000:00:03.3: reg 0x14: [mem 0xf0184000-0xf0184fff]
[ 0.344942] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.344981] pci 0000:00:1a.0: reg 0x20: [io 0x2100-0x211f]
[ 0.345195] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.345232] pci 0000:00:1a.1: reg 0x20: [io 0x2120-0x213f]
[ 0.345452] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.345488] pci 0000:00:1a.2: reg 0x20: [io 0x2140-0x215f]
[ 0.345709] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.345724] pci 0000:00:1a.7: reg 0x10: [mem 0xf0185000-0xf01853ff]
[ 0.345799] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.345944] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.345960] pci 0000:00:1b.0: reg 0x10: [mem 0xf0180000-0xf0183fff 64bit]
[ 0.346027] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.346246] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.346317] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.346529] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.346600] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.346802] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.346839] pci 0000:00:1d.0: reg 0x20: [io 0x2160-0x217f]
[ 0.347058] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.347094] pci 0000:00:1d.1: reg 0x20: [io 0x2180-0x219f]
[ 0.347318] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.347333] pci 0000:00:1d.7: reg 0x10: [mem 0xf0185400-0xf01857ff]
[ 0.347408] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.347597] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.347824] pci 0000:00:1f.0: [8086:2914] type 00 class 0x060100
[ 0.347896] pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.347901] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
[ 0.347904] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.347908] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.347911] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.348116] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018a
[ 0.348128] pci 0000:00:1f.2: reg 0x10: [io 0x2230-0x2237]
[ 0.348136] pci 0000:00:1f.2: reg 0x14: [io 0x2258-0x225b]
[ 0.348143] pci 0000:00:1f.2: reg 0x18: [io 0x2238-0x223f]
[ 0.348149] pci 0000:00:1f.2: reg 0x1c: [io 0x225c-0x225f]
[ 0.348156] pci 0000:00:1f.2: reg 0x20: [io 0x21d0-0x21df]
[ 0.348163] pci 0000:00:1f.2: reg 0x24: [io 0x21e0-0x21ef]
[ 0.348172] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.348174] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.348176] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.348177] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.348380] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.348393] pci 0000:00:1f.5: reg 0x10: [io 0x2240-0x2247]
[ 0.348400] pci 0000:00:1f.5: reg 0x14: [io 0x2260-0x2263]
[ 0.348407] pci 0000:00:1f.5: reg 0x18: [io 0x2248-0x224f]
[ 0.348413] pci 0000:00:1f.5: reg 0x1c: [io 0x2264-0x2267]
[ 0.348420] pci 0000:00:1f.5: reg 0x20: [io 0x21f0-0x21ff]
[ 0.348427] pci 0000:00:1f.5: reg 0x24: [io 0x2200-0x220f]
[ 0.348613] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
[ 0.348633] pci 0000:20:00.0: reg 0x10: [io 0x1100-0x11ff]
[ 0.348659] pci 0000:20:00.0: reg 0x18: [mem 0xf0300000-0xf0300fff 64bit]
[ 0.348675] pci 0000:20:00.0: reg 0x20: [mem 0xf0200000-0xf0203fff 64bit pref]
[ 0.348767] pci 0000:20:00.0: supports D1 D2
[ 0.348769] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.348914] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.348918] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.348921] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.348926] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 0.348984] pci 0000:00:1c.1: PCI bridge to [bus 30]
[ 0.349015] pci_bus 0000:07: extended config space not accessible
[ 0.349067] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.349075] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.349078] pci 0000:00:1e.0: bridge window [io 0x1000-0xffff window] (subtractive decode)
[ 0.349080] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.349083] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff window] (subtractive decode)
[ 0.349085] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[ 0.349087] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.349884] ACPI: PCI: Interrupt link LNKA configured for IRQ 5
[ 0.349986] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.350087] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[ 0.350187] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.350189] ACPI: PCI: Interrupt link LNKD disabled
[ 0.350289] ACPI: PCI: Interrupt link LNKE configured for IRQ 5
[ 0.350389] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[ 0.350490] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.350590] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.350592] ACPI: PCI: Interrupt link LNKH disabled
[ 0.351319] iommu: Default domain type: Translated
[ 0.351319] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.351319] SCSI subsystem initialized
[ 0.351319] libata version 3.00 loaded.
[ 0.351319] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.351319] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.351319] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.351319] vgaarb: loaded
[ 0.351319] ACPI: bus type USB registered
[ 0.351319] usbcore: registered new interface driver usbfs
[ 0.351319] usbcore: registered new interface driver hub
[ 0.351319] usbcore: registered new device driver usb
[ 0.351319] pps_core: LinuxPPS API ver. 1 registered
[ 0.351319] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.351319] PTP clock support registered
[ 0.351319] EDAC MC: Ver: 3.0.0
[ 0.351319] NetLabel: Initializing
[ 0.351319] NetLabel: domain hash size = 128
[ 0.351319] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.351319] NetLabel: unlabeled traffic allowed by default
[ 0.351319] PCI: Using ACPI for IRQ routing
[ 0.352970] PCI: pci_cache_line_size set to 64 bytes
[ 0.352970] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.352970] e820: reserve RAM buffer [mem 0xdefafe00-0xdfffffff]
[ 0.354304] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.354310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.354317] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.357038] clocksource: Switched to clocksource tsc-early
[ 0.373792] VFS: Disk quotas dquot_6.6.0
[ 0.373818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.373984] AppArmor: AppArmor Filesystem Enabled
[ 0.374016] pnp: PnP ACPI init
[ 0.374619] pnp 00:03: [dma 3]
[ 0.375594] pnp 00:06: [dma 2]
[ 0.376060] pnp 00:09: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.376065] pnp 00:09: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.376068] pnp 00:09: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.376071] pnp 00:09: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.376107] system 00:09: [io 0x0400-0x041f] has been reserved
[ 0.376110] system 00:09: [io 0x0420-0x043f] has been reserved
[ 0.376112] system 00:09: [io 0x0440-0x045f] has been reserved
[ 0.376115] system 00:09: [io 0x0460-0x047f] has been reserved
[ 0.376117] system 00:09: [io 0x0480-0x048f] has been reserved
[ 0.376120] system 00:09: [io 0xfa00-0xfa3f] has been reserved
[ 0.376122] system 00:09: [io 0xfc00-0xfc7f] has been reserved
[ 0.376124] system 00:09: [io 0xfc80-0xfcff] has been reserved
[ 0.376126] system 00:09: [io 0xfe00-0xfe7f] has been reserved
[ 0.376128] system 00:09: [io 0xfe80-0xfeff] has been reserved
[ 0.376196] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.376724] pnp 00:0b: disabling [mem 0x000cc400-0x000e3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.376756] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.376760] system 00:0b: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.376763] system 00:0b: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.376765] system 00:0b: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.376768] system 00:0b: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.376770] system 00:0b: [mem 0xfed45000-0xffffffff] has been reserved
[ 0.376776] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.376795] pnp: PnP ACPI: found 12 devices
[ 0.383152] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.383231] NET: Registered PF_INET protocol family
[ 0.383364] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.384364] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.384439] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.384606] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.384670] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.384794] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.384833] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.384861] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.384963] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.384974] NET: Registered PF_XDP protocol family
[ 0.384999] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
[ 0.385022] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000
[ 0.385027] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000
[ 0.385044] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
[ 0.385050] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.385054] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.385059] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.385063] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.385068] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.385071] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 0.385077] pci 0000:00:1c.1: PCI bridge to [bus 30]
[ 0.385079] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.385083] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff]
[ 0.385086] pci 0000:00:1c.1: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.385092] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.385101] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.385103] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
[ 0.385105] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.385107] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xf3ffffff window]
[ 0.385110] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfebfffff window]
[ 0.385112] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]
[ 0.385114] pci_bus 0000:20: resource 0 [io 0x1000-0x1fff]
[ 0.385116] pci_bus 0000:20: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.385118] pci_bus 0000:20: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[ 0.385120] pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
[ 0.385122] pci_bus 0000:30: resource 1 [mem 0xf0400000-0xf05fffff]
[ 0.385124] pci_bus 0000:30: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.385126] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.385128] pci_bus 0000:07: resource 5 [io 0x1000-0xffff window]
[ 0.385130] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.385132] pci_bus 0000:07: resource 7 [mem 0xe0000000-0xf3ffffff window]
[ 0.385134] pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfebfffff window]
[ 0.385136] pci_bus 0000:07: resource 9 [mem 0xfed40000-0xfed44fff window]
[ 0.387831] PCI: CLS 64 bytes, default 64
[ 0.387843] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.387845] software IO TLB: mapped [mem 0x00000000dafaf000-0x00000000defaf000] (64MB)
[ 0.387933] Trying to unpack rootfs image as initramfs...
[ 0.388442] Initialise system trusted keyrings
[ 0.388459] Key type blacklist registered
[ 0.396950] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.398871] zbud: loaded
[ 0.399251] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.399510] fuse: init (API version 7.34)
[ 0.399711] integrity: Platform Keyring initialized
[ 0.410539] Key type asymmetric registered
[ 0.410545] Asymmetric key parser 'x509' registered
[ 0.410592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.410668] io scheduler mq-deadline registered
[ 0.411458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.411547] ACPI: \_PR_.CPU0: Found 2 idle states
[ 0.411561] ACPI: \_PR_.CPU1: Found 2 idle states
[ 0.411686] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.411755] ACPI: button: Power Button [PBTN]
[ 0.411805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.411843] ACPI: button: Power Button [PWRF]
[ 0.411891] ACPI: \_PR_.CPU0: Found 2 idle states
[ 0.411895] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.412090] ACPI: \_PR_.CPU1: Found 2 idle states
[ 0.412190] clocksource: Switched to clocksource hpet
[ 0.412477] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.433023] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.453809] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.476545] 0000:00:03.3: ttyS4 at I/O 0x2228 (irq = 17, base_baud = 115200) is a 16550A
[ 0.477197] Linux agpgart interface v0.103
[ 0.480503] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16)
[ 0.484664] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[ 0.493008] tpm tpm0: Operation Timed out
[ 0.497644] tpm tpm0: Operation Timed out
[ 0.497658] tpm tpm0: Adjusting TPM timeout parameters.
[ 0.683009] random: fast init done
[ 1.017092] Freeing initrd memory: 59832K
[ 1.412682] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 1.442421] loop: module loaded
[ 1.442667] ata_piix 0000:00:1f.2: version 2.13
[ 1.442901] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.605574] scsi host0: ata_piix
[ 1.605742] scsi host1: ata_piix
[ 1.605793] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x21d0 irq 14
[ 1.605798] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x21d8 irq 15
[ 1.606011] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.765374] scsi host2: ata_piix
[ 1.765529] scsi host3: ata_piix
[ 1.765577] ata3: SATA max UDMA/133 cmd 0x2240 ctl 0x2260 bmdma 0x21f0 irq 18
[ 1.765581] ata4: SATA max UDMA/133 cmd 0x2248 ctl 0x2264 bmdma 0x21f8 irq 18
[ 1.766131] scsi host4: ata_generic
[ 1.766261] scsi host5: ata_generic
[ 1.766305] ata5: PATA max UDMA/100 cmd 0x2218 ctl 0x2250 bmdma 0x21c0 irq 18
[ 1.766308] ata6: PATA max UDMA/100 cmd 0x2220 ctl 0x2254 bmdma 0x21c8 irq 18
[ 1.766521] tun: Universal TUN/TAP device driver, 1.6
[ 1.766580] PPP generic driver version 2.4.2
[ 1.766655] VFIO - User Level meta-driver version: 0.3
[ 1.766740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.766747] ehci-pci: EHCI PCI platform driver
[ 1.766984] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.766992] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.767004] ehci-pci 0000:00:1a.7: debug port 1
[ 1.770919] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0185000
[ 1.784987] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.785062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.785066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.785070] usb usb1: Product: EHCI Host Controller
[ 1.785072] usb usb1: Manufacturer: Linux 5.15.0-22-generic ehci_hcd
[ 1.785074] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.785221] hub 1-0:1.0: USB hub found
[ 1.785230] hub 1-0:1.0: 6 ports detected
[ 1.785628] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.785635] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.785645] ehci-pci 0000:00:1d.7: debug port 1
[ 1.789562] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0185400
[ 1.804988] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.805057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.805062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.805065] usb usb2: Product: EHCI Host Controller
[ 1.805067] usb usb2: Manufacturer: Linux 5.15.0-22-generic ehci_hcd
[ 1.805069] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.805202] hub 2-0:1.0: USB hub found
[ 1.805210] hub 2-0:1.0: 4 ports detected
[ 1.805367] ehci-platform: EHCI generic platform driver
[ 1.805381] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.805385] ohci-pci: OHCI PCI platform driver
[ 1.805396] ohci-platform: OHCI generic platform driver
[ 1.805405] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.805609] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.805619] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.805625] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.805644] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002100
[ 1.805703] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 1.805706] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.805709] usb usb3: Product: UHCI Host Controller
[ 1.805711] usb usb3: Manufacturer: Linux 5.15.0-22-generic uhci_hcd
[ 1.805712] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.805823] hub 3-0:1.0: USB hub found
[ 1.805831] hub 3-0:1.0: 2 ports detected
[ 1.806139] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.806145] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.806151] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.806174] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002120
[ 1.806230] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 1.806234] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.806236] usb usb4: Product: UHCI Host Controller
[ 1.806238] usb usb4: Manufacturer: Linux 5.15.0-22-generic uhci_hcd
[ 1.806239] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.806336] hub 4-0:1.0: USB hub found
[ 1.806343] hub 4-0:1.0: 2 ports detected
[ 1.806645] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.806651] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.806665] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.806682] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002140
[ 1.806735] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 1.806738] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.806741] usb usb5: Product: UHCI Host Controller
[ 1.806743] usb usb5: Manufacturer: Linux 5.15.0-22-generic uhci_hcd
[ 1.806744] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.806844] hub 5-0:1.0: USB hub found
[ 1.806852] hub 5-0:1.0: 2 ports detected
[ 1.807163] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.807169] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.807175] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.807191] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160
[ 1.807251] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 1.807255] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.807257] usb usb6: Product: UHCI Host Controller
[ 1.807259] usb usb6: Manufacturer: Linux 5.15.0-22-generic uhci_hcd
[ 1.807260] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.807358] hub 6-0:1.0: USB hub found
[ 1.807365] hub 6-0:1.0: 2 ports detected
[ 1.807674] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.807680] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.807686] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.807702] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180
[ 1.807755] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 1.807759] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.807761] usb usb7: Product: UHCI Host Controller
[ 1.807763] usb usb7: Manufacturer: Linux 5.15.0-22-generic uhci_hcd
[ 1.807764] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.807866] hub 7-0:1.0: USB hub found
[ 1.807874] hub 7-0:1.0: 2 ports detected
[ 1.808054] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.810866] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.810873] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.811011] mousedev: PS/2 mouse device common for all mice
[ 1.811161] rtc_cmos 00:00: RTC can wake from S4
[ 1.811372] rtc_cmos 00:00: registered as rtc0
[ 1.811401] rtc_cmos 00:00: setting system clock to 2022-03-17T08:47:00 UTC (1647506820)
[ 1.811424] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.811437] i2c_dev: i2c /dev entries driver
[ 1.811496] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.811535] device-mapper: uevent: version 1.0.3
[ 1.811598] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 1.811627] platform eisa.0: Probing EISA bus 0
[ 1.811630] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.811632] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.811634] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.811636] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.811638] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.811640] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.811642] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.811644] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.811646] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.811648] platform eisa.0: EISA: Detected 0 cards
[ 1.811651] intel_pstate: CPU model not supported
[ 1.811674] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.811787] drop_monitor: Initializing network drop monitor service
[ 1.811980] NET: Registered PF_INET6 protocol family
[ 1.820466] Segment Routing with IPv6
[ 1.820486] In-situ OAM (IOAM) with IPv6
[ 1.820525] NET: Registered PF_PACKET protocol family
[ 1.820571] Key type dns_resolver registered
[ 1.820828] microcode: sig=0x6fb, pf=0x1, revision=0xba
[ 1.820876] microcode: Microcode Update Driver: v2.2.
[ 1.820882] IPI shorthand broadcast: enabled
[ 1.821028] registered taskstats version 1
[ 1.821067] Loading compiled-in X.509 certificates
[ 1.822162] Loaded X.509 cert 'Build time autogenerated kernel key: 9653f798f2e1e2419dbd884d1012b4884b21a57a'
[ 1.823152] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.824133] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.824135] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.824158] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.824373] zswap: loaded using pool lzo/zbud
[ 1.824595] Key type ._fscrypt registered
[ 1.824597] Key type .fscrypt registered
[ 1.824598] Key type fscrypt-provisioning registered
[ 1.824725] Key type trusted registered
[ 1.828795] Key type encrypted registered
[ 1.828801] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.828814] Loading compiled-in module X.509 certificates
[ 1.829851] Loaded X.509 cert 'Build time autogenerated kernel key: 9653f798f2e1e2419dbd884d1012b4884b21a57a'
[ 1.829855] ima: Allocated hash algorithm: sha1
[ 1.833025] ima: Error Communicating to TPM chip
[ 1.836693] ima: Error Communicating to TPM chip
[ 1.840178] ima: Error Communicating to TPM chip
[ 1.843583] ima: Error Communicating to TPM chip
[ 1.847066] ima: Error Communicating to TPM chip
[ 1.850729] ima: Error Communicating to TPM chip
[ 1.854381] ima: Error Communicating to TPM chip
[ 1.858039] ima: Error Communicating to TPM chip
[ 1.858960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.864126] ima: No architecture policies found
[ 1.864147] evm: Initialising EVM extended attributes:
[ 1.864149] evm: security.selinux
[ 1.864151] evm: security.SMACK64
[ 1.864153] evm: security.SMACK64EXEC
[ 1.864154] evm: security.SMACK64TRANSMUTE
[ 1.864156] evm: security.SMACK64MMAP
[ 1.864157] evm: security.apparmor
[ 1.864159] evm: security.ima
[ 1.864160] evm: security.capability
[ 1.864161] evm: HMAC attrs: 0x1
[ 1.864551] PM: Magic number: 14:341:776
[ 1.866146] RAS: Correctable Errors collector initialized.
[ 1.866160] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 2.094023] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.241020] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.243407] ata3.00: supports DRM functions and may not be fully accessible
[ 2.243411] ata3.00: ATA-9: Samsung SSD 750 EVO 250GB, MAT01B6Q, max UDMA/133
[ 2.243415] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 2.246009] ata3.00: Features: Trust Dev-Sleep
[ 2.248477] ata3.00: supports DRM functions and may not be fully accessible
[ 2.251173] ata3.00: configured for UDMA/133
[ 2.389033] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.389047] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.389057] ata2.01: link offline, clearing class 3 to NONE
[ 2.391342] ata2.00: ATAPI: Optiarc DVD-ROM DDU1671S, 1H17, max UDMA/100
[ 2.393031] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.393043] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.395329] ata1.00: ATA-7: ST3160815AS, 3.CHH, max UDMA/100
[ 2.395334] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.395825] ata2.00: configured for UDMA/100
[ 2.399824] ata1.00: configured for UDMA/100
[ 2.399976] scsi 0:0:0:0: Direct-Access ATA ST3160815AS H PQ: 0 ANSI: 5
[ 2.400274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.400346] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.400361] sd 0:0:0:0: [sda] Write Protect is off
[ 2.400364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.400428] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.400868] scsi 1:0:0:0: CD-ROM Optiarc DVD-ROM DDU1671S 1H17 PQ: 0 ANSI: 5
[ 2.462412] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 2.462416] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.463036] sda: sda1 sda3 < sda5 sda6 >
[ 2.485118] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.493756] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.493835] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.494003] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 750 1B6Q PQ: 0 ANSI: 5
[ 2.494276] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.494383] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.494398] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.494401] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.494427] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.510990] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 2.525485] sd 2:0:0:0: [sdb] supports TCG Opal
[ 2.525489] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.540991] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.670097] Freeing unused decrypted memory: 2036K
[ 2.671164] Freeing unused kernel image (initmem) memory: 2956K
[ 2.671238] Write protecting the kernel read-only data: 30720k
[ 2.672278] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 2.672949] Freeing unused kernel image (rodata/data gap) memory: 1516K
[ 2.738014] usb 3-1: New USB device found, idVendor=04a9, idProduct=220d, bcdDevice= 1.00
[ 2.738021] usb 3-1: New USB device strings: Mfr=64, Product=77, SerialNumber=0
[ 2.738024] usb 3-1: Product: CanoScan
[ 2.738026] usb 3-1: Manufacturer: Canon
[ 2.742083] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.742111] x86/mm: Checking user space page tables
[ 2.793063] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.793071] Run /init as init process
[ 2.793073] with arguments:
[ 2.793074] /init
[ 2.793076] splash
[ 2.793077] with environment:
[ 2.793078] HOME=/
[ 2.793079] TERM=linux
[ 2.793081] BOOT_IMAGE=/boot/vmlinuz-5.15.0-22-generic
[ 2.957822] FDC 0 is a post-1991 82077
[ 3.030261] gpio_ich gpio_ich.2.auto: GPIO from 963 to 1023
[ 3.035401] r8169 0000:20:00.0 eth0: RTL8168evl/8111evl, 00:13:3b:12:b3:f5, XID 2c9, IRQ 24
[ 3.035409] r8169 0000:20:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 3.037375] r8169 0000:20:00.0 enp32s0: renamed from eth0
[ 3.216995] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.409008] usb 5-1: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[ 3.409017] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.409020] usb 5-1: Product: USB Optical Mouse
[ 3.421269] hid: raw HID events driver (C) Jiri Kosina
[ 3.440341] usbcore: registered new interface driver usbhid
[ 3.440345] usbhid: USB HID core driver
[ 3.444004] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:1BCF:0005.0001/input/input5
[ 3.444145] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.2-1/input0
[ 3.671727] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.101890] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 4.282313] systemd[1]: Inserted module 'autofs4'
[ 4.308555] systemd[1]: systemd 249.11-0ubuntu1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.325078] systemd[1]: Detected architecture x86-64.
[ 4.325582] systemd[1]: Hostname set to <scanda>.
[ 4.585489] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.587104] systemd[1]: Created slice Slice /system/modprobe.
[ 4.587588] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 4.587937] systemd[1]: Created slice User and Session Slice.
[ 4.588055] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.588326] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.588470] systemd[1]: Reached target User and Group Name Lookups.
[ 4.588523] systemd[1]: Reached target Slice Units.
[ 4.588579] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4.592889] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.593155] systemd[1]: Listening on Syslog Socket.
[ 4.593318] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.593415] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.593727] systemd[1]: Listening on Journal Audit Socket.
[ 4.593884] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.594073] systemd[1]: Listening on Journal Socket.
[ 4.594542] systemd[1]: Listening on udev Control Socket.
[ 4.594745] systemd[1]: Listening on udev Kernel Socket.
[ 4.595884] systemd[1]: Mounting Huge Pages File System...
[ 4.597148] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.598432] systemd[1]: Mounting Kernel Debug File System...
[ 4.599636] systemd[1]: Mounting Kernel Trace File System...
[ 4.601972] systemd[1]: Starting Journal Service...
[ 4.602162] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 4.605880] systemd[1]: Starting Set the console keyboard layout...
[ 4.607126] systemd[1]: Starting Create List of Static Device Nodes...
[ 4.608380] systemd[1]: Starting Load Kernel Module configfs...
[ 4.609741] systemd[1]: Starting Load Kernel Module drm...
[ 4.610989] systemd[1]: Starting Load Kernel Module fuse...
[ 4.611225] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.618941] systemd[1]: Starting Load Kernel Modules...
[ 4.622856] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.634064] systemd[1]: Starting Coldplug All udev Devices...
[ 4.638151] systemd[1]: Mounted Huge Pages File System.
[ 4.638314] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.638443] systemd[1]: Mounted Kernel Debug File System.
[ 4.638570] systemd[1]: Mounted Kernel Trace File System.
[ 4.639002] systemd[1]: Finished Create List of Static Device Nodes.
[ 4.649286] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 4.661729] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.662112] systemd[1]: Finished Load Kernel Module configfs.
[ 4.662704] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.663160] systemd[1]: Finished Load Kernel Module drm.
[ 4.663642] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 4.664017] systemd[1]: Finished Load Kernel Module fuse.
[ 4.664650] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 4.668794] systemd[1]: Mounting FUSE Control File System...
[ 4.670684] systemd[1]: Mounting Kernel Configuration File System...
[ 4.670833] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 4.671397] lp: driver loaded but no devices found
[ 4.686123] systemd[1]: Starting Load/Save Random Seed...
[ 4.695582] systemd[1]: Starting Create System Users...
[ 4.700016] systemd[1]: Mounted FUSE Control File System.
[ 4.700627] systemd[1]: Finished Load/Save Random Seed.
[ 4.700828] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 4.706343] systemd[1]: Mounted Kernel Configuration File System.
[ 4.715263] ppdev: user-space parallel port driver
[ 4.718564] parport_pc 00:03: reported by Plug and Play ACPI
[ 4.718658] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 4.757822] systemd[1]: Finished Create System Users.
[ 4.759217] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.775994] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 4.778137] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 4.821487] lp0: using parport0 (interrupt-driven).
[ 4.828723] IPMI message handler: version 39.2
[ 4.834342] ipmi device interface
[ 4.838284] systemd[1]: Finished Set the console keyboard layout.
[ 4.838498] systemd[1]: Reached target Preparation for Local File Systems.
[ 4.849321] systemd[1]: Finished Load Kernel Modules.
[ 4.850975] systemd[1]: Starting Apply Kernel Variables...
[ 4.865877] systemd[1]: Started Journal Service.
[ 4.876766] systemd-journald[259]: Received client request to flush runtime journal.
[ 5.565425] pci 0000:00:00.0: Intel Q35 Chipset
[ 5.565442] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 5.565765] pci 0000:00:00.0: detected 8192K stolen memory
[ 5.565806] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 5.566419] [drm] ACPI BIOS requests an excessive sleep of 4294704126 ms, using 1500 ms instead
[ 5.595410] i915 0000:00:02.0: [drm] Initialized overlay support.
[ 5.597651] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 5.597897] ACPI: video: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 5.598017] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 5.629625] fbcon: i915drmfb (fb0) is primary device
[ 5.655696] coretemp coretemp.0: Using relative temperature scale!
[ 5.668751] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 5.670814] coretemp coretemp.0: Using relative temperature scale!
[ 5.679122] Console: switching to colour frame buffer device 160x64
[ 5.686489] intel_powerclamp: No package C-state available
[ 5.695698] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 5.729471] intel_powerclamp: No package C-state available
[ 5.953929] Adding 8352764k swap on /dev/sdb5. Priority:-2 extents:1 across:8352764k SSFS
[ 6.024011] random: crng init done
[ 6.105190] audit: type=1400 audit(1647506824.792:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=411 comm="apparmor_parser"
[ 6.114084] audit: type=1400 audit(1647506824.800:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=415 comm="apparmor_parser"
[ 6.114093] audit: type=1400 audit(1647506824.800:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=415 comm="apparmor_parser"
[ 6.129226] audit: type=1400 audit(1647506824.816:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=410 comm="apparmor_parser"
[ 6.129236] audit: type=1400 audit(1647506824.816:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=410 comm="apparmor_parser"
[ 6.175541] audit: type=1400 audit(1647506824.860:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[ 6.175549] audit: type=1400 audit(1647506824.860:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=416 comm="apparmor_parser"
[ 6.175553] audit: type=1400 audit(1647506824.860:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
[ 6.175557] audit: type=1400 audit(1647506824.860:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=416 comm="apparmor_parser"
[ 6.177623] RPC: Registered named UNIX socket transport module.
[ 6.177627] RPC: Registered udp transport module.
[ 6.177628] RPC: Registered tcp transport module.
[ 6.177629] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.183341] audit: type=1400 audit(1647506824.868:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=421 comm="apparmor_parser"
[ 6.399376] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 6.399385] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 6.399388] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 6.399391] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 6.399392] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 6.399394] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 6.399396] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 6.412736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.412812] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.412905] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.413006] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.710266] Adding 4110332k swap on /dev/sda6. Priority:-3 extents:1 across:4110332k FS
[ 7.432990] mei_me 0000:00:03.0: wait hw ready failed
[ 7.433034] mei_me 0000:00:03.0: hw_start failed ret = -62
[ 7.433090] mei_me 0000:00:03.0: H_RST is set = 0x80000015
[ 7.509627] RTL8211E Gigabit Ethernet r8169-0-2000:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2000:00, irq=MAC)
[ 7.692754] loop0: detected capacity change from 0 to 8
[ 7.841735] r8169 0000:20:00.0 enp32s0: Link is Down
[ 9.320542] r8169 0000:20:00.0 enp32s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 9.320563] IPv6: ADDRCONF(NETDEV_CHANGE): enp32s0: link becomes ready
[ 9.424440] FS-Cache: Loaded
[ 9.449001] mei_me 0000:00:03.0: wait hw ready failed
[ 9.449040] mei_me 0000:00:03.0: hw_start failed ret = -62
[ 9.449071] mei_me 0000:00:03.0: H_RST is set = 0x80000015
[ 9.471151] FS-Cache: Netfs 'nfs' registered for caching
[ 9.680899] NFS: Registering the id_resolver key type
[ 9.680915] Key type id_resolver registered
[ 9.680916] Key type id_legacy registered
[ 11.464997] mei_me 0000:00:03.0: wait hw ready failed
[ 11.465040] mei_me 0000:00:03.0: hw_start failed ret = -62
[ 11.465078] mei_me 0000:00:03.0: reset: reached maximal consecutive resets: disabling the device
[ 11.465129] mei_me 0000:00:03.0: reset failed ret = -19
[ 11.465161] mei_me 0000:00:03.0: link layer initialization failed.
[ 11.465199] mei_me 0000:00:03.0: init hw failure.
[ 11.465282] mei_me 0000:00:03.0: initialization failed./var/log/syslog lasse ich mal weg, da es sehr lang ist. Bei Bedarf bitte nachfragen.
Genauer Informationen über das Rechnermodell habe ich im Moment leider nicht, da ich dazu den Rechner abbauen müsste, um das Typenschild, das vermutlich hinten ist, lesen zu können.
Bearbeitet von rklm:
Syntaxhighlighting
Moderiert von rklm:
Verschoben in ein passederes Forum
