tomtomtom schrieb:
Ogrosch schrieb:
Ich möchte sie allerdings nicht löschen, da dort noch wichtige Daten sind.
Wenn es sich da um wirklich wichtige Daten handeln, hast du ja ein Backup, das du nutzen kannst.
Da sie sich aber (auch vom Stick aus) nicht mounten lässt, bekomme ich keinen Zugriff.
Na dann bitte mal verwertbare Informationen. Vom Livesystem aus bitte die Terminal-Ausgaben von
sudo dmesg
und
sudo parted --list
hier jeweils im Codeblock zeigen zwecks Analyse.
ubuntu@ubuntu:~$ sudo dmesg
[ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd80fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfde0000-0x00000000bfde2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfde3000-0x00000000bfdeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770TA-UD3/GA-770TA-UD3, BIOS F4b 08/02/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 4 base 000200000000 mask FFFF00000000 write-back
[ 0.000000] 5 base 000300000000 mask FFFFC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000340000000 aka 13312M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 3070M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfd81 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f45a0-0x000f45af] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 92000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x16333e000, 0x16333efff] PGTABLE
[ 0.000000] BRK [0x16333f000, 0x16333ffff] PGTABLE
[ 0.000000] BRK [0x163340000, 0x163340fff] PGTABLE
[ 0.000000] BRK [0x163341000, 0x163341fff] PGTABLE
[ 0.000000] BRK [0x163342000, 0x163342fff] PGTABLE
[ 0.000000] BRK [0x163343000, 0x163343fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7dccb000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5FB0 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000BFDE3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000BFDE3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000BFDE30C0 007476 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000BFDE0000 000040
[ 0.000000] ACPI: SSDT 0x00000000BFDEA600 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000BFDEAEC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000BFDEAF00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 0x00000000BFDEA540 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x33ffd5000-0x33fffffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000033fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000097fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfd80fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000033fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
[ 0.000000] On node 0 totalpages: 3144984
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12215 pages used for memmap
[ 0.000000] DMA32 zone: 781697 pages, LIFO batch:31
[ 0.000000] Normal zone: 36864 pages used for memmap
[ 0.000000] Normal zone: 2359296 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 105 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd81000-0xbfddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfde0000-0xbfde2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfde3000-0xbfdeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfdf0000-0xbfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xbfe00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3095820
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x62e000000-0x62fffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 12186056K/12579936K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 393880K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 39065 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 3013.266 MHz processor
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.53 BogoMIPS (lpj=12053064)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.033387] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035621] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.035713] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.035784] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036039] CPU: Physical Processor ID: 0
[ 0.036040] CPU: Processor Core ID: 0
[ 0.036041] mce: CPU supports 6 MCE banks
[ 0.036046] LVT offset 0 assigned for vector 0xf9
[ 0.036049] process: using AMD E400 aware idle routine
[ 0.036050] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.036051] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.036052] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.036053] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.036832] Freeing SMP alternatives memory: 36K
[ 0.040012] process: System has AMD C1E enabled
[ 0.044000] process: Switch to broadcast mode on CPU0
[ 0.044000] smpboot: CPU0: AMD Phenom(tm) II X4 945 Processor (family: 0x10, model: 0x4, stepping: 0x3)
[ 0.044000] Performance Events: AMD PMU driver.
[ 0.044000] ... version: 0
[ 0.044000] ... bit width: 48
[ 0.044000] ... generic registers: 4
[ 0.044000] ... value mask: 0000ffffffffffff
[ 0.044000] ... max period: 00007fffffffffff
[ 0.044000] ... fixed-purpose events: 0
[ 0.044000] ... event mask: 000000000000000f
[ 0.044000] Hierarchical SRCU implementation.
[ 0.044000] smp: Bringing up secondary CPUs ...
[ 0.044000] x86: Booting SMP configuration:
[ 0.044000] .... node #0, CPUs: #1
[ 0.004000] do_IRQ: 1.55 No irq handler for vector
[ 0.044000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.004000] process: Switch to broadcast mode on CPU1
[ 0.044000] #2
[ 0.004000] do_IRQ: 2.55 No irq handler for vector
[ 0.004000] process: Switch to broadcast mode on CPU2
[ 0.046132] #3
[ 0.004000] do_IRQ: 3.55 No irq handler for vector
[ 0.004000] process: Switch to broadcast mode on CPU3
[ 0.048061] smp: Brought up 1 node, 4 CPUs
[ 0.048061] smpboot: Max logical packages: 2
[ 0.048061] smpboot: Total of 4 processors activated (24106.12 BogoMIPS)
[ 0.052643] devtmpfs: initialized
[ 0.052643] x86/mm: Memory block size: 128MB
[ 0.053055] evm: security.selinux
[ 0.053056] evm: security.SMACK64
[ 0.053056] evm: security.SMACK64EXEC
[ 0.053057] evm: security.SMACK64TRANSMUTE
[ 0.053057] evm: security.SMACK64MMAP
[ 0.053058] evm: security.apparmor
[ 0.053058] evm: security.ima
[ 0.053059] evm: security.capability
[ 0.053089] PM: Registering ACPI NVS region [mem 0xbfde0000-0xbfde2fff] (12288 bytes)
[ 0.053089] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.053089] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.053089] pinctrl core: initialized pinctrl subsystem
[ 0.053089] RTC time: 12:48:52, date: 09/02/21
[ 0.057137] NET: Registered protocol family 16
[ 0.057223] audit: initializing netlink subsys (disabled)
[ 0.057229] audit: type=2000 audit(1630586932.056:1): state=initialized audit_enabled=0 res=1
[ 0.057229] cpuidle: using governor ladder
[ 0.057229] cpuidle: using governor menu
[ 0.057229] node 0 link 0: io port [9000, ffff]
[ 0.057229] TOM: 00000000c0000000 aka 3072M
[ 0.057229] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.057229] node 0 link 0: mmio [a0000, bffff]
[ 0.057229] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.057229] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.057229] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
[ 0.057229] TOM2: 0000000340000000 aka 13312M
[ 0.057229] bus: [bus 00-06] on node 0 link 0
[ 0.057229] bus: 00 [io 0x0000-0xffff]
[ 0.057229] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.057229] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.057229] bus: 00 [mem 0xe0700000-0xffffffff]
[ 0.057229] bus: 00 [mem 0xe0100000-0xe06fffff]
[ 0.057229] bus: 00 [mem 0x340000000-0xfcffffffff]
[ 0.057229] ACPI: bus type PCI registered
[ 0.057229] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.057229] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.057229] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.057229] PCI: Using configuration type 1 for base access
[ 0.057229] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.057229] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.057229] ACPI: Added _OSI(Module Device)
[ 0.057229] ACPI: Added _OSI(Processor Device)
[ 0.057229] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.057229] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.061705] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.061769] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.061830] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.061891] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.062008] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.062069] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.062130] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.062191] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.062305] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.062366] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.062427] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.062497] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.062633] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.062714] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.062795] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.062876] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.063013] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.063094] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.063175] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.063256] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.063391] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.063472] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.063554] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.063635] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.063771] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.063852] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.063933] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.064008] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.064146] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.064227] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.064308] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.064390] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.064526] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.064608] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.064688] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.064770] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.064905] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.064986] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.065067] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.065148] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.065285] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[ 0.065366] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[ 0.065447] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[ 0.065528] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[ 0.068368] ACPI: Interpreter enabled
[ 0.068389] ACPI: (supports S0 S3 S4 S5)
[ 0.068390] ACPI: Using IOAPIC for interrupt routing
[ 0.068473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.068640] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.077050] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.077055] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.077059] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.077366] PCI host bridge to bus 0000:00
[ 0.077369] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.077370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.077372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.077373] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.077374] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[ 0.077376] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.077383] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.077394] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 0.077490] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.077505] pci 0000:00:02.0: enabling Extended Tags
[ 0.077525] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.077614] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.077627] pci 0000:00:06.0: enabling Extended Tags
[ 0.077646] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.077728] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.077742] pci 0000:00:07.0: enabling Extended Tags
[ 0.077761] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.077844] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
[ 0.077857] pci 0000:00:09.0: enabling Extended Tags
[ 0.077876] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.077958] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.077972] pci 0000:00:0a.0: enabling Extended Tags
[ 0.077990] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.078082] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.078102] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.078111] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.078119] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.078127] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.078136] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.078144] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.078263] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.078279] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.078411] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.078428] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.078565] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.078585] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.078660] pci 0000:00:12.2: supports D1 D2
[ 0.078661] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.078750] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.078767] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.078900] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.078917] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.079053] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.079073] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.079148] pci 0000:00:13.2: supports D1 D2
[ 0.079149] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.079240] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.079401] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.079419] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.079428] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.079436] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.079444] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.079452] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.079471] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.079472] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.079473] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.079474] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.079579] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.079601] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.079665] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.079747] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.079892] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.080031] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.080047] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[ 0.080183] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.080261] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.080336] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.080413] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.080491] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.080606] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
[ 0.080625] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.080634] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.080643] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.080649] pci 0000:01:00.0: reg 0x24: [io 0xaf00-0xaf7f]
[ 0.080656] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.080748] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[ 0.080762] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
[ 0.092027] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.092031] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.092033] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.092035] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.092085] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601
[ 0.092156] pci 0000:02:00.0: reg 0x24: [mem 0xfd6fe000-0xfd6fffff]
[ 0.092212] pci 0000:02:00.0: PME# supported from D3hot
[ 0.092260] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.092278] pci 0000:02:00.1: reg 0x10: [io 0xef00-0xef07]
[ 0.092285] pci 0000:02:00.1: reg 0x14: [io 0xee00-0xee03]
[ 0.092292] pci 0000:02:00.1: reg 0x18: [io 0xed00-0xed07]
[ 0.092299] pci 0000:02:00.1: reg 0x1c: [io 0xec00-0xec03]
[ 0.092306] pci 0000:02:00.1: reg 0x20: [io 0xeb00-0xeb0f]
[ 0.092380] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.092386] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.092388] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.092390] pci 0000:00:06.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.092392] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.092428] pci 0000:03:00.0: [1b4b:9128] type 00 class 0x010601
[ 0.092449] pci 0000:03:00.0: reg 0x10: [io 0xdf00-0xdf07]
[ 0.092459] pci 0000:03:00.0: reg 0x14: [io 0xde00-0xde03]
[ 0.092468] pci 0000:03:00.0: reg 0x18: [io 0xdd00-0xdd07]
[ 0.092477] pci 0000:03:00.0: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.092486] pci 0000:03:00.0: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.092496] pci 0000:03:00.0: reg 0x24: [mem 0xfdeff000-0xfdeff7ff]
[ 0.092505] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.092557] pci 0000:03:00.0: PME# supported from D3hot
[ 0.104019] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.104022] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.104024] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.104026] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.104073] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.104094] pci 0000:04:00.0: reg 0x10: [mem 0xfdcfe000-0xfdcfffff 64bit]
[ 0.104172] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.116022] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.116025] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.116027] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.116030] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.116078] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.116098] pci 0000:05:00.0: reg 0x10: [io 0xbe00-0xbeff]
[ 0.116116] pci 0000:05:00.0: reg 0x18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
[ 0.116128] pci 0000:05:00.0: reg 0x20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
[ 0.116136] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.116197] pci 0000:05:00.0: supports D1 D2
[ 0.116198] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128021] pci 0000:00:0a.0: PCI bridge to [bus 05]
[ 0.128024] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.128026] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.128028] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.128092] pci 0000:06:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.128119] pci 0000:06:0e.0: reg 0x10: [mem 0xfd8ff000-0xfd8ff7ff]
[ 0.128130] pci 0000:06:0e.0: reg 0x14: [mem 0xfd8f8000-0xfd8fbfff]
[ 0.128224] pci 0000:06:0e.0: supports D1 D2
[ 0.128225] pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.128282] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[ 0.128285] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.128288] pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.128292] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref]
[ 0.128293] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.128294] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.128295] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.128296] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.128298] pci 0000:00:14.4: bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[ 0.128609] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.128674] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.128737] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.128800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.128862] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.128924] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.128987] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.129049] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.129925] SCSI subsystem initialized
[ 0.129941] libata version 3.00 loaded.
[ 0.129941] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.129941] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.129941] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.129941] vgaarb: loaded
[ 0.129941] ACPI: bus type USB registered
[ 0.129941] usbcore: registered new interface driver usbfs
[ 0.129941] usbcore: registered new interface driver hub
[ 0.129941] usbcore: registered new device driver usb
[ 0.129941] EDAC MC: Ver: 3.0.0
[ 0.129941] PCI: Using ACPI for IRQ routing
[ 0.134685] PCI: pci_cache_line_size set to 64 bytes
[ 0.134750] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[ 0.134752] e820: reserve RAM buffer [mem 0xbfd81000-0xbfffffff]
[ 0.136001] NetLabel: Initializing
[ 0.136001] NetLabel: domain hash size = 128
[ 0.136001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.136001] NetLabel: unlabeled traffic allowed by default
[ 0.136051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.136054] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.141060] clocksource: Switched to clocksource hpet
[ 0.152799] VFS: Disk quotas dquot_6.6.0
[ 0.152815] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.152926] AppArmor: AppArmor Filesystem Enabled
[ 0.152951] pnp: PnP ACPI init
[ 0.153077] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.153079] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.153080] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.153084] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.153409] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.153417] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.153420] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.153440] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.153442] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.153444] system 00:01: [io 0x040b] has been reserved
[ 0.153445] system 00:01: [io 0x04d6] has been reserved
[ 0.153446] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.153447] system 00:01: [io 0x0c14] has been reserved
[ 0.153449] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.153450] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.153451] system 00:01: [io 0x0c6f] has been reserved
[ 0.153452] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.153454] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.153455] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.153456] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.153458] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.153459] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.153460] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.153461] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.153463] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.153466] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.153651] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.154119] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.154122] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154353] system 00:04: [mem 0x000d7400-0x000d7fff] has been reserved
[ 0.154354] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.154356] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.154357] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.154358] system 00:04: [mem 0xbfde0000-0xbfdeffff] could not be reserved
[ 0.154359] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.154361] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.154362] system 00:04: [mem 0x00100000-0xbfddffff] could not be reserved
[ 0.154363] system 00:04: [mem 0xbfdf0000-0xbfdfffff] has been reserved
[ 0.154365] system 00:04: [mem 0xbfe00000-0xbfefffff] could not be reserved
[ 0.154366] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.154367] system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.154369] system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.154372] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.154396] pnp: PnP ACPI: found 5 devices
[ 0.161179] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.161207] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
[ 0.161210] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.161212] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.161214] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.161216] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.161219] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.161220] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.161222] pci 0000:00:06.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.161223] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.161226] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.161228] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.161229] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.161231] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.161232] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.161235] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.161236] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.161238] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.161239] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.161243] pci 0000:05:00.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref]
[ 0.161244] pci 0000:00:0a.0: PCI bridge to [bus 05]
[ 0.161245] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.161247] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.161248] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.161252] pci 0000:00:14.4: PCI bridge to [bus 06]
[ 0.161254] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.161258] pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.161261] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref]
[ 0.161267] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.161268] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.161269] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.161270] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.161271] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[ 0.161273] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.161274] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.161275] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.161276] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.161277] pci_bus 0000:02: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.161278] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.161279] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.161280] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.161282] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.161283] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.161284] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.161285] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.161286] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.161287] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.161288] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.161289] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.161290] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.161291] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref]
[ 0.161293] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.161294] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.161295] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.161296] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.161297] pci_bus 0000:06: resource 8 [mem 0xbff00000-0xfebfffff window]
[ 0.161375] NET: Registered protocol family 2
[ 0.161609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.161927] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.162211] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.162274] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162364] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162488] NET: Registered protocol family 1
[ 0.624271] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.624281] pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.624284] pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.624449] PCI: CLS 64 bytes, default 64
[ 0.624498] Unpacking initramfs...
[ 7.397741] Freeing initrd memory: 36052K
[ 7.398613] PCI-DMA: Disabling AGP.
[ 7.398691] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 7.398692] PCI-DMA: using GART IOMMU.
[ 7.398694] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 7.401637] LVT offset 1 assigned for vector 0x400
[ 7.401645] IBS: LVT offset 1 assigned
[ 7.401774] perf: AMD IBS detected (0x0000001f)
[ 7.401851] Scanning for low memory corruption every 60 seconds
[ 7.402419] Initialise system trusted keyrings
[ 7.402428] Key type blacklist registered
[ 7.402529] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 7.403641] zbud: loaded
[ 7.404049] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.404224] fuse init (API version 7.26)
[ 7.406224] Key type asymmetric registered
[ 7.406225] Asymmetric key parser 'x509' registered
[ 7.406266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.406325] io scheduler noop registered
[ 7.406326] io scheduler deadline registered
[ 7.406369] io scheduler cfq registered (default)
[ 7.407388] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 7.407397] ACPI: Power Button [PWRB]
[ 7.407434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.407481] ACPI: Power Button [PWRF]
[ 7.407518] ACPI: ACPI: processor limited to max C-state 1
[ 7.407852] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 7.409833] Linux agpgart interface v0.103
[ 7.411348] loop: module loaded
[ 7.411516] libphy: Fixed MDIO Bus: probed
[ 7.411516] tun: Universal TUN/TAP device driver, 1.6
[ 7.411550] PPP generic driver version 2.4.2
[ 7.411592] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.411595] ehci-pci: EHCI PCI platform driver
[ 7.411722] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 7.411728] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 7.411732] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 7.411741] ehci-pci 0000:00:12.2: debug port 1
[ 7.411789] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 7.424080] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 7.424122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.424124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.424125] usb usb1: Product: EHCI Host Controller
[ 7.424126] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[ 7.424127] usb usb1: SerialNumber: 0000:00:12.2
[ 7.424234] hub 1-0:1.0: USB hub found
[ 7.424239] hub 1-0:1.0: 6 ports detected
[ 7.424511] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 7.424517] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 7.424520] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 7.424529] ehci-pci 0000:00:13.2: debug port 1
[ 7.424570] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 7.440065] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 7.440104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.440105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.440106] usb usb2: Product: EHCI Host Controller
[ 7.440107] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[ 7.440108] usb usb2: SerialNumber: 0000:00:13.2
[ 7.440211] hub 2-0:1.0: USB hub found
[ 7.440215] hub 2-0:1.0: 6 ports detected
[ 7.440348] ehci-platform: EHCI generic platform driver
[ 7.440357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.440361] ohci-pci: OHCI PCI platform driver
[ 7.440496] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 7.440500] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 7.440531] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 7.504151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.504152] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.504153] usb usb3: Product: OHCI PCI host controller
[ 7.504154] usb usb3: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[ 7.504155] usb usb3: SerialNumber: 0000:00:12.0
[ 7.504267] hub 3-0:1.0: USB hub found
[ 7.504273] hub 3-0:1.0: 3 ports detected
[ 7.504491] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 7.504496] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 7.504512] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 7.568088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.568089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.568090] usb usb4: Product: OHCI PCI host controller
[ 7.568091] usb usb4: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[ 7.568092] usb usb4: SerialNumber: 0000:00:12.1
[ 7.568202] hub 4-0:1.0: USB hub found
[ 7.568208] hub 4-0:1.0: 3 ports detected
[ 7.568440] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 7.568444] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 7.568474] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 7.632092] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.632094] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.632095] usb usb5: Product: OHCI PCI host controller
[ 7.632095] usb usb5: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[ 7.632096] usb usb5: SerialNumber: 0000:00:13.0
[ 7.632203] hub 5-0:1.0: USB hub found
[ 7.632210] hub 5-0:1.0: 3 ports detected
[ 7.632438] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 7.632443] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 7.632459] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 7.696088] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.696089] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.696090] usb usb6: Product: OHCI PCI host controller
[ 7.696091] usb usb6: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[ 7.696092] usb usb6: SerialNumber: 0000:00:13.1
[ 7.696199] hub 6-0:1.0: USB hub found
[ 7.696206] hub 6-0:1.0: 3 ports detected
[ 7.696434] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 7.696438] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 7.696455] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[ 7.760040] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 7.760094] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.760096] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.760097] usb usb7: Product: OHCI PCI host controller
[ 7.760098] usb usb7: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[ 7.760099] usb usb7: SerialNumber: 0000:00:14.5
[ 7.760207] hub 7-0:1.0: USB hub found
[ 7.760213] hub 7-0:1.0: 2 ports detected
[ 7.760320] ohci-platform: OHCI generic platform driver
[ 7.760328] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.760424] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 7.760429] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[ 7.760538] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 7.760705] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.760706] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.760707] usb usb8: Product: xHCI Host Controller
[ 7.760708] usb usb8: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 7.760709] usb usb8: SerialNumber: 0000:04:00.0
[ 7.760812] hub 8-0:1.0: USB hub found
[ 7.760818] hub 8-0:1.0: 2 ports detected
[ 7.760889] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 7.760892] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 7.763906] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.763919] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.763921] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.763922] usb usb9: Product: xHCI Host Controller
[ 7.763923] usb usb9: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 7.763924] usb usb9: SerialNumber: 0000:04:00.0
[ 7.764039] hub 9-0:1.0: USB hub found
[ 7.764049] hub 9-0:1.0: 2 ports detected
[ 7.764174] i8042: PNP: No PS/2 controller found.
[ 7.764175] i8042: Probing ports directly.
[ 7.764615] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.764620] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.764767] mousedev: PS/2 mouse device common for all mice
[ 7.764909] rtc_cmos 00:02: RTC can wake from S4
[ 7.765013] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 7.765045] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 7.765050] i2c /dev entries driver
[ 7.765092] device-mapper: uevent: version 1.0.3
[ 7.765149] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 7.765233] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.765608] NET: Registered protocol family 10
[ 7.769173] Segment Routing with IPv6
[ 7.769192] NET: Registered protocol family 17
[ 7.769236] Key type dns_resolver registered
[ 7.769492] RAS: Correctable Errors collector initialized.
[ 7.769542] microcode: CPU0: patch_level=0x010000c8
[ 7.769549] microcode: CPU1: patch_level=0x010000c8
[ 7.769556] microcode: CPU2: patch_level=0x010000c8
[ 7.769563] microcode: CPU3: patch_level=0x010000c8
[ 7.769598] microcode: Microcode Update Driver: v2.2.
[ 7.769610] sched_clock: Marking stable (7769594123, 0)->(7885818393, -116224270)
[ 7.769858] registered taskstats version 1
[ 7.769865] Loading compiled-in X.509 certificates
[ 7.772420] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[ 7.772440] zswap: loaded using pool lzo/zbud
[ 7.775464] Key type big_key registered
[ 7.775468] Key type trusted registered
[ 7.777000] Key type encrypted registered
[ 7.777003] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.777007] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 7.777024] evm: HMAC attrs: 0x1
[ 7.777334] Magic number: 5:228:834
[ 7.777449] rtc_cmos 00:02: setting system clock to 2021-09-02 12:49:00 UTC (1630586940)
[ 7.777573] acpi_cpufreq: overriding BIOS provided _PSD data
[ 7.777689] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.777689] EDD information not available.
[ 7.781127] Freeing unused kernel memory: 2404K
[ 7.781128] Write protecting the kernel read-only data: 20480k
[ 7.781848] Freeing unused kernel memory: 2008K
[ 7.786762] Freeing unused kernel memory: 1904K
[ 7.794903] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 7.861158] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 7.862300] ahci 0000:00:11.0: version 3.0
[ 7.862557] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 7.862559] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 7.866504] scsi host1: ahci
[ 7.867733] scsi host0: pata_jmicron
[ 7.867969] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.867979] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.868377] r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0x00000000957cc1de, 6c:f0:49:b6:65:f2, XID 083000c0 IRQ 29
[ 7.868378] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 7.868387] scsi host3: pata_jmicron
[ 7.868419] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19
[ 7.868420] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19
[ 7.868801] scsi host2: ahci
[ 7.870149] scsi host4: ahci
[ 7.870305] scsi host5: ahci
[ 7.871742] scsi host6: ahci
[ 7.872135] scsi host7: ahci
[ 7.872176] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 7.872178] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 7.872181] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 7.872183] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 7.872185] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 7.872187] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 7.872240] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247)
[ 7.872245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.882439] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 7.882442] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 7.883063] scsi host8: ahci
[ 7.883307] scsi host9: ahci
[ 7.883346] ata9: SATA max UDMA/133 abar m8192@0xfd6fe000 port 0xfd6fe100 irq 18
[ 7.883348] ata10: SATA max UDMA/133 abar m8192@0xfd6fe000 port 0xfd6fe180 irq 18
[ 7.893027] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 7.893694] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 7.893697] ahci 0000:03:00.0: flags: 64bit ncq pio
[ 7.896740] scsi host11: pata_atiixp
[ 7.896893] scsi host10: ahci
[ 7.896976] scsi host13: ahci
[ 7.897157] scsi host14: ahci
[ 7.897234] scsi host15: ahci
[ 7.897323] scsi host16: ahci
[ 7.897402] scsi host17: ahci
[ 7.897480] scsi host18: ahci
[ 7.897554] scsi host19: ahci
[ 7.897586] ata11: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff100 irq 30
[ 7.897588] ata12: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff180 irq 30
[ 7.897590] ata13: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff200 irq 30
[ 7.897592] ata14: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff280 irq 30
[ 7.897594] ata15: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff300 irq 30
[ 7.897596] ata16: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff380 irq 30
[ 7.897598] ata17: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff400 irq 30
[ 7.897600] ata18: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff480 irq 30
[ 7.904034] scsi host12: pata_atiixp
[ 7.904084] ata19: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 7.904085] ata20: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 7.927327] nouveau 0000:01:00.0: NVIDIA GM107 (117000a2)
[ 7.969298] firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 8.037829] nouveau 0000:01:00.0: bios: version 82.07.25.00.12
[ 8.039306] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[ 8.039323] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 3e6684 [ IBUS ]
[ 8.039488] usb 1-2: New USB device found, idVendor=046d, idProduct=080f
[ 8.039491] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 8.039492] usb 1-2: SerialNumber: 8AEAEF80
[ 8.043200] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[ 8.199072] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.199708] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.202928] ata10: SATA link down (SStatus 0 SControl 300)
[ 8.202958] ata7: SATA link down (SStatus 0 SControl 300)
[ 8.202995] ata9: SATA link down (SStatus 0 SControl 300)
[ 8.204863] ata8: SATA link down (SStatus 0 SControl 300)
[ 8.214744] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.214791] ata13: SATA link down (SStatus 0 SControl 300)
[ 8.214840] ata15: SATA link down (SStatus 0 SControl 300)
[ 8.214864] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 8.214908] ata12: SATA link down (SStatus 0 SControl 300)
[ 8.214961] ata11: SATA link down (SStatus 0 SControl 300)
[ 8.215014] ata14: SATA link down (SStatus 0 SControl 300)
[ 8.215068] ata17: SATA link down (SStatus 0 SControl 300)
[ 8.215120] ata16: SATA link down (SStatus 0 SControl 300)
[ 8.215165] ata18.00: configured for UDMA/66
[ 8.356075] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.356672] ata3.00: ATA-9: WDC WD20EURX-63T0FY0, 80.00A80, max UDMA/133
[ 8.356673] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.357280] ata3.00: configured for UDMA/133
[ 8.357542] scsi 1:0:0:0: Direct-Access ATA WDC WD20EURX-63T 0A80 PQ: 0 ANSI: 5
[ 8.357807] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 8.357820] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 8.357821] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 8.357833] sd 1:0:0:0: [sda] Write Protect is off
[ 8.357834] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.357852] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.360075] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.366478] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 8.366479] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.372946] ata4.00: configured for UDMA/133
[ 8.373150] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
[ 8.373363] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 8.373373] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.373385] sd 2:0:0:0: [sdb] Write Protect is off
[ 8.373386] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.373418] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.373648] scsi 19:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 8.373776] scsi 19:0:0:0: Attached scsi generic sg2 type 3
[ 8.383908] sdb: sdb1
[ 8.384786] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 8.416059] tsc: Refined TSC clocksource calibration: 3013.327 MHz
[ 8.416066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b6f7313610, max_idle_ns: 440795349584 ns
[ 8.436111] sda: sda1
[ 8.436549] sd 1:0:0:0: [sda] Attached SCSI disk
[ 8.544137] firewire_core 0000:06:0e.0: created device fw0: GUID 003e402e006cf049, S400
[ 8.924061] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 9.286293] usb 1-5: New USB device found, idVendor=058f, idProduct=6387
[ 9.286295] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.286296] usb 1-5: Product: Fashionline
[ 9.286297] usb 1-5: Manufacturer: takeMS
[ 9.286298] usb 1-5: SerialNumber: F951E714
[ 9.340792] [TTM] Zone kernel: Available graphics memory: 6147206 kiB
[ 9.340793] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 9.340794] [TTM] Initializing pool allocator
[ 9.340799] [TTM] Initializing DMA pool allocator
[ 9.340809] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 9.340810] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 9.340813] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 9.340814] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 9.340816] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000f00 00000000
[ 9.340818] nouveau 0000:01:00.0: DRM: DCB outp 01: 01011f12 00020030
[ 9.340819] nouveau 0000:01:00.0: DRM: DCB outp 02: 08022f82 00020030
[ 9.340820] nouveau 0000:01:00.0: DRM: DCB outp 03: 02033f62 00020010
[ 9.340822] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[ 9.340823] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010131
[ 9.340824] nouveau 0000:01:00.0: DRM: DCB conn 02: 01000231
[ 9.340825] nouveau 0000:01:00.0: DRM: DCB conn 03: 00020361
[ 9.352307] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.352308] [drm] Driver supports precise vblank timestamp query.
[ 9.352775] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 9.455499] clocksource: Switched to clocksource tsc
[ 9.490391] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo 0000000052fd29d8
[ 9.524537] fbcon: nouveaufb (fb0) is primary device
[ 9.671535] Console: switching to colour frame buffer device 160x64
[ 9.687002] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 9.700072] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 9.748064] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 9.942905] usb 4-1: New USB device found, idVendor=046d, idProduct=c05b
[ 9.942907] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.942908] usb 4-1: Product: USB Optical Mouse
[ 9.942909] usb 4-1: Manufacturer: Logitech
[ 9.948141] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.954039] usbcore: registered new interface driver usbhid
[ 9.954040] usbhid: USB HID core driver
[ 9.955909] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:046D:C05B.0001/input/input5
[ 9.955991] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-1/input0
[ 10.128062] usb 4-3: new low-speed USB device number 3 using ohci-pci
[ 10.325899] usb 4-3: New USB device found, idVendor=046a, idProduct=0023
[ 10.325901] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.335470] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 10.335566] scsi host20: usb-storage 1-5:1.0
[ 10.335633] usbcore: registered new interface driver usb-storage
[ 10.337069] usbcore: registered new interface driver uas
[ 10.341325] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/0003:046A:0023.0002/input/input6
[ 10.348129] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/0003:046A:0023.0003/input/input7
[ 10.400148] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.1-3/input0
[ 10.464123] cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.1-3/input1
[ 10.785512] random: crng init done
[ 10.829940] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.360875] scsi 20:0:0:0: Direct-Access takeMS Fashionline 8.07 PQ: 0 ANSI: 2
[ 11.361123] sd 20:0:0:0: Attached scsi generic sg3 type 0
[ 11.362477] sd 20:0:0:0: [sdc] 8267776 512-byte logical blocks: (4.23 GB/3.94 GiB)
[ 11.363107] sd 20:0:0:0: [sdc] Write Protect is off
[ 11.363109] sd 20:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 11.363728] sd 20:0:0:0: [sdc] No Caching mode page found
[ 11.363731] sd 20:0:0:0: [sdc] Assuming drive cache: write through
[ 11.412976] sdc: sdc1 sdc2
[ 11.415475] sd 20:0:0:0: [sdc] Attached SCSI removable disk
[ 12.094239] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 12.097988] ISO 9660 Extensions: RRIP_1991A
[ 17.850720] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.856202] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 17.856328] systemd[1]: Detected architecture x86-64.
[ 17.857879] systemd[1]: Set hostname to <ubuntu>.
[ 17.858067] systemd[1]: Initializing machine ID from random generator.
[ 17.973662] systemd[1]: Unnecessary job for /dev/loop0 was removed.
[ 17.973873] systemd[1]: Reached target Swap.
[ 17.974077] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 17.974119] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 17.974129] systemd[1]: Reached target Remote File Systems.
[ 17.974287] systemd[1]: Created slice User and Session Slice.
[ 18.105920] systemd-journald[1053]: Received request to flush runtime journal from PID 1
[ 18.181833] lp: driver loaded but no devices found
[ 18.189311] ppdev: user-space parallel port driver
[ 18.462269] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.478028] media: Linux media interface: v0.10
[ 19.703334] Linux video capture interface: v2.00
[ 19.763408] kvm: Nested Virtualization enabled
[ 19.763413] kvm: Nested Paging enabled
[ 19.807156] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 19.807162] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 19.840170] MCE: In-kernel MCE decoding enabled.
[ 19.855396] EDAC amd64: Node 0: DRAM ECC disabled.
[ 19.855398] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 19.909043] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080f)
[ 19.942311] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 19.942313] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.942315] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 19.942316] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 19.942318] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 19.942319] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 19.942321] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 19.942323] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 19.942324] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 19.942325] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 19.942326] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
[ 19.949485] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[ 19.949487] uvcvideo 1-2:1.0: Entity type for entity Extension 8 was not initialized!
[ 19.949488] uvcvideo 1-2:1.0: Entity type for entity Extension 10 was not initialized!
[ 19.949489] uvcvideo 1-2:1.0: Entity type for entity Extension 12 was not initialized!
[ 19.949491] uvcvideo 1-2:1.0: Entity type for entity Extension 11 was not initialized!
[ 19.949492] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[ 19.949493] uvcvideo 1-2:1.0: Entity type for entity Extension 13 was not initialized!
[ 19.949494] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 19.949495] uvcvideo 1-2:1.0: Entity type for entity Extension 14 was not initialized!
[ 19.949616] input: UVC Camera (046d:080f) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input8
[ 19.949929] usbcore: registered new interface driver uvcvideo
[ 19.949930] USB Video Class driver (1.1.1)
[ 19.962369] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 19.962419] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 19.962466] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 19.962508] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 19.962550] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 19.962607] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 19.962656] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 20.600609] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 20.600670] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 20.600718] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[ 21.105398] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 21.301361] r8169 0000:05:00.0 enp5s0: link down
[ 21.301363] r8169 0000:05:00.0 enp5s0: link down
[ 21.301670] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 21.641999] audit: type=1400 audit(1630586954.362:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1478 comm="apparmor_parser"
[ 21.642158] audit: type=1400 audit(1630586954.362:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1478 comm="apparmor_parser"
[ 23.389066] r8169 0000:05:00.0 enp5s0: link up
[ 23.389075] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 44.482011] audit: type=1400 audit(1630586977.202:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3144 comm="apparmor_parser"
[ 44.482147] audit: type=1400 audit(1630586977.202:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3144 comm="apparmor_parser"
[ 44.507120] audit: type=1400 audit(1630586977.226:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=3146 comm="apparmor_parser"
[ 44.598941] audit: type=1400 audit(1630586977.318:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=3148 comm="apparmor_parser"
[ 45.168105] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[ 47.941157] audit: type=1400 audit(1630586980.662:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3264 comm="apparmor_parser"
[ 47.964207] audit: type=1400 audit(1630586980.686:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3264 comm="apparmor_parser"
[ 47.974336] audit: type=1400 audit(1630586980.694:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3266 comm="apparmor_parser"
[ 47.981078] audit: type=1400 audit(1630586980.702:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3268 comm="apparmor_parser"
[ 48.073264] audit: type=1400 audit(1630586980.794:12): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3276 comm="apparmor_parser"
[ 48.073269] audit: type=1400 audit(1630586980.794:13): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3276 comm="apparmor_parser"
[ 50.288242] kauditd_printk_skb: 14 callbacks suppressed
[ 50.288246] audit: type=1400 audit(1630586983.003:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=3465 comm="apparmor_parser"
[ 50.394785] audit: type=1400 audit(1630586983.106:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=3467 comm="apparmor_parser"
[ 50.567249] audit: type=1400 audit(1630586983.282:30): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3476 comm="apparmor_parser"
[ 50.567256] audit: type=1400 audit(1630586983.282:31): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3476 comm="apparmor_parser"
[ 50.571771] audit: type=1400 audit(1630586983.290:32): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3478 comm="apparmor_parser"
[ 50.577200] audit: type=1400 audit(1630586983.294:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3480 comm="apparmor_parser"
[ 50.633226] audit: type=1400 audit(1630586983.350:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=3488 comm="apparmor_parser"
[ 50.908317] audit: type=1400 audit(1630586983.621:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=3490 comm="apparmor_parser"
[ 50.978395] audit: type=1400 audit(1630586983.693:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3498 comm="apparmor_parser"
[ 50.978400] audit: type=1400 audit(1630586983.693:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3498 comm="apparmor_parser"
[ 55.473880] kauditd_printk_skb: 49 callbacks suppressed
[ 55.473884] audit: type=1400 audit(1630586988.174:87): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=3762 comm="apparmor_parser"
[ 55.547866] audit: type=1400 audit(1630586988.250:88): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3770 comm="apparmor_parser"
[ 55.547878] audit: type=1400 audit(1630586988.250:89): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3770 comm="apparmor_parser"
[ 55.552961] audit: type=1400 audit(1630586988.254:90): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3772 comm="apparmor_parser"
[ 55.564094] audit: type=1400 audit(1630586988.266:91): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3774 comm="apparmor_parser"
[ 55.621191] audit: type=1400 audit(1630586988.326:92): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=3782 comm="apparmor_parser"
[ 55.932600] audit: type=1400 audit(1630586988.637:93): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=3784 comm="apparmor_parser"
[ 56.006368] audit: type=1400 audit(1630586988.709:94): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=3792 comm="apparmor_parser"
[ 56.006375] audit: type=1400 audit(1630586988.709:95): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3792 comm="apparmor_parser"
[ 56.015766] audit: type=1400 audit(1630586988.717:96): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3794 comm="apparmor_parser"
[ 60.485552] kauditd_printk_skb: 58 callbacks suppressed
[ 60.485554] audit: type=1400 audit(1630586993.182:155): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4082 comm="apparmor_parser"
[ 60.541620] audit: type=1400 audit(1630586993.238:156): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=4090 comm="apparmor_parser"
[ 60.771155] audit: type=1400 audit(1630586993.465:157): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=4092 comm="apparmor_parser"
[ 60.903391] audit: type=1400 audit(1630586993.597:158): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=4100 comm="apparmor_parser"
[ 61.135256] audit: type=1400 audit(1630586993.829:159): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=4102 comm="apparmor_parser"
[ 61.245271] audit: type=1400 audit(1630586993.941:160): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=4110 comm="apparmor_parser"
[ 61.245278] audit: type=1400 audit(1630586993.941:161): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4110 comm="apparmor_parser"
[ 61.249784] audit: type=1400 audit(1630586993.945:162): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=4112 comm="apparmor_parser"
[ 61.254651] audit: type=1400 audit(1630586993.949:163): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4114 comm="apparmor_parser"
[ 61.297792] audit: type=1400 audit(1630586993.993:164): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=4122 comm="apparmor_parser"
[ 65.649725] kauditd_printk_skb: 46 callbacks suppressed
[ 65.649729] audit: type=1400 audit(1630586998.335:211): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=4365 comm="apparmor_parser"
[ 65.781494] audit: type=1400 audit(1630586998.467:212): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=4373 comm="apparmor_parser"
[ 65.781501] audit: type=1400 audit(1630586998.467:213): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4373 comm="apparmor_parser"
[ 65.788504] audit: type=1400 audit(1630586998.475:214): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=4375 comm="apparmor_parser"
[ 65.794205] audit: type=1400 audit(1630586998.479:215): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4377 comm="apparmor_parser"
[ 65.836586] audit: type=1400 audit(1630586998.523:216): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=4385 comm="apparmor_parser"
[ 66.194524] audit: type=1400 audit(1630586998.879:217): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=4387 comm="apparmor_parser"
[ 66.295855] audit: type=1400 audit(1630586998.983:218): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=4397 comm="apparmor_parser"
[ 66.295861] audit: type=1400 audit(1630586998.983:219): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4397 comm="apparmor_parser"
[ 66.302435] audit: type=1400 audit(1630586998.987:220): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=4399 comm="apparmor_parser"
[ 111.784524] rfkill: input handler disabled
[ 291.577061] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 291.815090] capability: warning: `gvfsd-admin' uses 32-bit capabilities (legacy support in use)
[ 333.114708] JBD2: journal transaction 10401880 on dm-0-8 is corrupt.
[ 333.114714] EXT4-fs (dm-0): error loading journal
[ 2624.896206] JBD2: journal transaction 10401880 on dm-0-8 is corrupt.
[ 2624.896219] EXT4-fs (dm-0): error loading journal
ubuntu@ubuntu:~$ sudo parted --list
Modell: ATA WDC WD20EURX-63T (scsi)
Festplatte /dev/sda: 2000GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags:
Nummer Anfang Ende Größe Dateisystem Name Flags
1 1049kB 2000GB 2000GB ext4
Modell: ATA SAMSUNG HD103UJ (scsi)
Festplatte /dev/sdb: 1000GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Disk-Flags:
Nummer Anfang Ende Größe Typ Dateisystem Flags
1 1049kB 1000GB 1000GB primary boot, LVM
Warnung: Der Treiberdeskriptor sagt, dass die physische Blockgröße 2048 Bytes
ist. Linux sagt, dass es 512 Bytes sind.
Ignorieren/Ignore/Abbrechen/Cancel?
Festplatte /dev/sdc: 16,9GB
Sektorgröße (logisch/physisch): 2048B/512B
Partitionstabelle: mac
Disk-Flags:
Nummer Anfang Ende Größe Dateisystem Name Flags
1 2048B 6143B 4096B Apple
2 1880MB 1883MB 2392kB EFI
Modell: Linux device-mapper (linear) (dm)
Festplatte /dev/mapper/ubuntu--vg-root: 999GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: loop
Disk-Flags:
Nummer Anfang Ende Größe Dateisystem Flags
1 0,00B 999GB 999GB ext4
Modell: Linux device-mapper (linear) (dm)
Festplatte /dev/mapper/ubuntu--vg-swap_1: 1023MB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: loop
Disk-Flags:
Nummer Anfang Ende Größe Dateisystem Flags
1 0,00B 1023MB 1023MB linux-swap(v1)