|
Anmeldungsdatum: Beiträge: 117 |
Hallo, ich habe vorhin ein normales Update gemacht und seither stürzen zumindest Inkscape und Digikam ab. Leider hab ich natürlich nicht großartig nachgeschaut was da wieder mal als Update angeboten wird. 😳 Die angehängten Screenshots hab ich jeweils kurz nach den Abstürzen gemacht. Da ich ein ziemlicher DAU bin kann ich mir das nicht erklären. Ich wäre sehr Dankbar über eure Hilfe. Grüße Rainer Moderiert von Taomon: Passender verschoben. |
||||
|
Anmeldungsdatum: Beiträge: 7756 |
Deine Screenshots tragen gar nichts bei. Du könntest bspw. nachsehen, welche Pakete als letzte installiert worden sind:
Mindestens, wenn größeres zu reparieren ist, solltest Du Dir jedoch überlegen, gleich Kubuntu 20.04.1 zu installieren, Du hast nur noch knapp 4 Monate Support. |
||||
|
Anmeldungsdatum: Beiträge: 8018 |
Moin Moin 60-Plus Bilder mögen zwar in manchen Situationen angebracht sein, hier helfen sie nicht. Also, Terminal auf, Eingabe von hier kopieren digikam Das Gleiche machen wir mit inkscape Und, damit wir mehr Infos bekommen sudo apt-get update && sudo apt-get dist-upgrade Alle Ausgaben des Terminals im Codeblock vom Eigabebefehl bis zum Endprompt hier einstellen. Nachtrag: Dann schauen wir uns einmal Deine grep -P '^[ \t]*[^#[ \t]+' /etc/apt/sources.list /etc/apt/sources.list.d/*.list an. Ausgabe ebenfalls im Codeblock. Gruß |
||||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 117 |
Das ist wohl auf Dauer sowieso Sinnvoll, derweil vier Monate gleich rum sind. Ergo werde ich das jezt angehen: besser iss das! Tuemmler schrieb:
Jo. Daher: digikam.general: AlbumWatch use QFileSystemWatcher
digikam.general: Database Parameters:
Type: "QSQLITE"
DB Core Name: "/Daten/wirbeide/Bilder/digikam4.db"
DB Thumbs Name: "/Daten/wirbeide/Bilder/thumbnails-digikam.db"
DB Face Name: "/Daten/wirbeide/Bilder/recognition.db"
Connect Options: ""
Host Name: ""
Host port: -1
Internal Server: false
Internal Server Path: ""
Internal Server Serv Cmd: ""
Internal Server Init Cmd: ""
Username: ""
Password: ""
digikam.dbengine: Loading SQL code from config file "/usr/share/digikam/database/dbconfig.xml"
digikam.dbengine: Checking XML version ID => expected: 3 found: 3
digikam.coredb: Core database: running schema update
digikam.coredb: Core database: have a structure version 8
digikam.coredb: Core database: makeUpdates 8 to 8
digikam.database: Creating new Location "/wirbeide/Bilder" uuid "volumeid:?uuid=ab13d3bb-66c8-4dbb-bd22-52dcf1a0d616"
digikam.database: location for "/Daten/wirbeide/Bilder" is available true
KMemoryInfo: Platform identified : "LINUX"
KMemoryInfo: TotalRam: 16767488000
digikam.general: Allowing a cache size of 200 MB
digikam.thumbsdb: ThumbDB SelectThumbnailSetting val ret = 0
digikam.thumbsdb: ThumbDB SelectThumbnailSetting val ret = 0
digikam.thumbsdb: Thumbs database: have a structure version "3"
digikam.general: Thumbnails database ready for use
digikam.dimg: ("/usr/share/color/icc")
digikam.dimg: No X.org XICC profile installed for screen 0
digikam.general: Camera XML data: "/home/wirbeide/.local/share/digikam/cameras.xml"
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: Face database: have a structure version "3"
digikam.facedb: Face database: cannot process schema initialization
digikam.facesengine: Failed to initialize face database
digikam.general: Face PipeLine: add database writer
digikam.general: Face PipeLine: add faces trainer
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: Face database: have a structure version "3"
digikam.facedb: Face database: cannot process schema initialization
digikam.facesengine: Failed to initialize face database
digikam.general: Face PipeLine: add database writer
digikam.general: Face PipeLine: add faces trainer
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
digikam.geoiface: "setting backend marble"
QtAV 1.12.0(Apr 15 2018, 02:52:19)
Multimedia framework base on Qt and FFmpeg.
Distributed under the terms of LGPLv2.1 or later.
Shanghai University->S3 Graphics->Deepin->PPTV, Shanghai, China Copyright (C) 2012-2016 Wang Bin (aka. Lucas Wang) wbsecg1@gmail.com
Donate: http://qtav.org/donate.html
Source: https://github.com/wang-bin/QtAV
Home page: http://qtav.org
digikam.general: AudioOutput backends: ("OpenAL", "Pulse", "null")
digikam.general: Stacked View Mode : 0
digikam.geoiface: "setting backend marble"
digikam.geoiface: "setting backend marble"
digikam.general: "browse_album"
digikam.general: "browse_tag"
digikam.general: "browse_labels"
digikam.general: "browse_date"
digikam.general: "browse_timeline"
digikam.general: "browse_search"
digikam.general: "browse_fuzzysearch"
digikam.general: "browse_gpssearch"
digikam.general: "browse_people"
digikam.widgets: Paths to color scheme : ("/usr/share/digikam/colorschemes")
digikam.widgets: "Breeze" :: ""
digikam.widgets: "Breeze" :: ""
QFSFileEngine::open: No file name specified
digikam.dimg: Root lens database dir: "/usr/share/lensfun"
digikam.dimg: Load lens database file: "6x6.xml"
digikam.dimg: Load lens database file: "actioncams.xml"
digikam.dimg: Load lens database file: "compact-canon.xml"
digikam.dimg: Load lens database file: "compact-casio.xml"
digikam.dimg: Load lens database file: "compact-fujifilm.xml"
digikam.dimg: Load lens database file: "compact-kodak.xml"
digikam.dimg: Load lens database file: "compact-konica-minolta.xml"
digikam.dimg: Load lens database file: "compact-leica.xml"
digikam.dimg: Load lens database file: "compact-nikon.xml"
digikam.dimg: Load lens database file: "compact-olympus.xml"
digikam.dimg: Load lens database file: "compact-panasonic.xml"
digikam.dimg: Load lens database file: "compact-pentax.xml"
digikam.dimg: Load lens database file: "compact-ricoh.xml"
digikam.dimg: Load lens database file: "compact-samsung.xml"
digikam.dimg: Load lens database file: "compact-sigma.xml"
digikam.dimg: Load lens database file: "compact-sony.xml"
digikam.dimg: Load lens database file: "contax.xml"
digikam.dimg: Load lens database file: "generic.xml"
digikam.dimg: Load lens database file: "mil-canon.xml"
digikam.dimg: Load lens database file: "mil-fujifilm.xml"
digikam.dimg: Load lens database file: "mil-nikon.xml"
digikam.dimg: Load lens database file: "mil-olympus.xml"
digikam.dimg: Load lens database file: "mil-panasonic.xml"
digikam.dimg: Load lens database file: "mil-pentax.xml"
digikam.dimg: Load lens database file: "mil-samsung.xml"
digikam.dimg: Load lens database file: "mil-samyang.xml"
digikam.dimg: Load lens database file: "mil-sigma.xml"
digikam.dimg: Load lens database file: "mil-sony.xml"
digikam.dimg: Load lens database file: "mil-tamron.xml"
digikam.dimg: Load lens database file: "mil-tokina.xml"
digikam.dimg: Load lens database file: "mil-zeiss.xml"
digikam.dimg: Load lens database file: "misc.xml"
digikam.dimg: Load lens database file: "rf-leica.xml"
digikam.dimg: Load lens database file: "slr-canon.xml"
digikam.dimg: Load lens database file: "slr-hasselblad.xml"
digikam.dimg: Load lens database file: "slr-konica-minolta.xml"
digikam.dimg: Load lens database file: "slr-leica.xml"
digikam.dimg: Load lens database file: "slr-nikon.xml"
digikam.dimg: Load lens database file: "slr-olympus.xml"
digikam.dimg: Load lens database file: "slr-panasonic.xml"
digikam.dimg: Load lens database file: "slr-pentax.xml"
digikam.dimg: Load lens database file: "slr-ricoh.xml"
digikam.dimg: Load lens database file: "slr-samsung.xml"
digikam.dimg: Load lens database file: "slr-samyang.xml"
digikam.dimg: Load lens database file: "slr-schneider.xml"
digikam.dimg: Load lens database file: "slr-sigma.xml"
digikam.dimg: Load lens database file: "slr-soligor.xml"
digikam.dimg: Load lens database file: "slr-sony.xml"
digikam.dimg: Load lens database file: "slr-tamron.xml"
digikam.dimg: Load lens database file: "slr-tokina.xml"
digikam.dimg: Load lens database file: "slr-ussr.xml"
digikam.dimg: Load lens database file: "slr-vivitar.xml"
digikam.dimg: Load lens database file: "slr-zeiss.xml"
digikam.dimg: variant: QVariant(Digikam::LensFunIface::DevicePtr, )
digikam.dimg: dev: AEE DV :: AEE DV :: 6
digikam.dimg: Search for camera "" - "" ==> false
digikam.dimg: Search for lens "" ==> false
digikam.dimg: updating data
digikam.dimg: updating data
digikam.general: Using 16 CPU core to run threads
digikam.general: new search text settings: "" : hasResult = false , validRows = 0
QFSFileEngine::open: No file name specified
digikam.geoiface: ----
digikam.general: Added root album called: "Bilder"
digikam.general: Using 16 CPU core to run threads
digikam.general: Action Thread run 1 new jobs
digikam.geoiface: ----
digikam.geoiface: ----
digikam.general: Using 16 CPU core to run threads
digikam.general: Action Thread run 1 new jobs
digikam.geoiface: ----
digikam.general: Cancel Main Thread
digikam.geoiface: ----
digikam.general: Using 16 CPU core to run threads
digikam.general: Action Thread run 1 new jobs
digikam.geoiface: ----
digikam.general: Cancel Main Thread
digikam.geoiface: ----
digikam.general: Using 16 CPU core to run threads
digikam.general: changing to SAlbum 0x5574bba4d320
digikam.general: Action Thread run 1 new jobs
digikam.database: " ( 1 ) "
digikam.database: Search query:
"SELECT DISTINCT Images.id, Images.name, Images.album, Albums.albumRoot, ImageInformation.rating, Images.category, ImageInformation.format, ImageInformation.creationDate, Images.modificationDate, Images.fileSize, ImageInformation.width, ImageInformation.height, ImagePositions.latitudeNumber, ImagePositions.longitudeNumber FROM Images LEFT JOIN ImageInformation ON Images.id=ImageInformation.imageid LEFT JOIN ImageMetadata ON Images.id=ImageMetadata.imageid LEFT JOIN VideoMetadata ON Images.id=VideoMetadata.imageid LEFT JOIN ImagePositions ON Images.id=ImagePositions.imageid INNER JOIN Albums ON Albums.id=Images.album WHERE Images.status=1 AND ( ( 1 ) );"
()
digikam.database: Search result: 602826
digikam.geoiface: "ROADMAP"
digikam.geoiface: "ROADMAP"
digikam.geoiface: "ROADMAP"
digikam.geoiface: ----
digikam.general: Cancel Main Thread
digikam.geoiface: ----
digikam.general: Using 16 CPU core to run threads
digikam.general: Action Thread run 1 new jobs
digikam.geoiface: "ROADMAP"
digikam.geoiface: ----
digikam.general: One job is done
digikam.general: One job is done
digikam.general: One job is done
digikam.general: One job is done
digikam.general: Cancel Main Thread
digikam.general: One job is done
kipi.library: Plugin "KXMLHelloWorld" (generic name: "KXMLHelloWorld" ) is in the ignore list from host application
digikam.geoiface: ----
digikam.geoiface: "setting backend marble"
QFSFileEngine::open: No file name specified
digikam.geoiface: "ROADMAP"
digikam.geoiface: "setting backend marble"
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: Face database: have a structure version "3"
digikam.facedb: Face database: cannot process schema initialization
digikam.facesengine: Failed to initialize face database
digikam.general: Face PipeLine: add database writer
digikam.general: Face PipeLine: add faces trainer
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: FaceDB SelectFaceSetting val ret = 0
digikam.facedb: Face database: have a structure version "3"
digikam.facedb: Face database: cannot process schema initialization
digikam.facesengine: Failed to initialize face database
digikam.general: Face PipeLine: add database writer
digikam.general: Face PipeLine: add faces trainer
digikam.geoiface: "setting backend marble"
QFSFileEngine::open: No file name specified
digikam.geoiface: "ROADMAP"
digikam.geoiface: "ROADMAP"
digikam.general: scan mode: ScanDeferredFiles
digikam.general: total scan value : 48697
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop.
digikam.database: items to tag ()
digikam.database: Complete scan took: 5985 msecs.
digikam.general: Event is dispatched through a passive pop-up
QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
digikam.geoiface: ----
digikam.geoiface: ----
digikam.general: Using 16 CPU core to run threads
digikam.general: Action Thread run 1 new jobs
digikam.general: Cancel Main Thread
digikam.general: One job is done
digikam.metaengine: Cannot load metadata from file (Error # 11 : /Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Buergerzentrum_2021.xcf: The file contains data of an unknown image type
digikam.general: Trying to load Embedded preview with libraw
digikam.rawengine: Failed to load embedded RAW preview
digikam.general: Trying to load half preview with libraw
digikam.general: Trying to load Embedded preview with Exiv2
digikam.metaengine: Cannot load metadata using Exiv2 (Error # 11 : /Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Buergerzentrum_2021.xcf: The file contains data of an unknown image type
digikam.dimg: "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Buergerzentrum_2021.xcf" : QIMAGE file identified
digikam.dimg.qimage: Can not load " "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Buergerzentrum_2021.xcf" " using DImg::QImageLoader!
digikam.general: mimetype = "XCF" ext = "XCF"
digikam.general: Cannot create thumbnail for "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Buergerzentrum_2021.xcf"
digikam.general: Thumbnail is null for "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Buergerzentrum_2021.xcf"
digikam.metaengine: Cannot load metadata from file (Error # 11 : /Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Flyer-Ausstellung_Buergerzentrum_Puchheim_2021.xcf: The file contains data of an unknown image type
digikam.general: Trying to load Embedded preview with libraw
digikam.rawengine: Failed to load embedded RAW preview
digikam.general: Trying to load half preview with libraw
digikam.general: Trying to load Embedded preview with Exiv2
digikam.metaengine: Cannot load metadata using Exiv2 (Error # 11 : /Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Flyer-Ausstellung_Buergerzentrum_Puchheim_2021.xcf: The file contains data of an unknown image type
digikam.dimg: "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Flyer-Ausstellung_Buergerzentrum_Puchheim_2021.xcf" : QIMAGE file identified
digikam.dimg.qimage: Can not load " "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Flyer-Ausstellung_Buergerzentrum_Puchheim_2021.xcf" " using DImg::QImageLoader!
digikam.general: mimetype = "XCF" ext = "XCF"
digikam.general: Cannot create thumbnail for "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Flyer-Ausstellung_Buergerzentrum_Puchheim_2021.xcf"
digikam.general: Thumbnail is null for "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Flyer-Ausstellung_Buergerzentrum_Puchheim_2021.xcf"
digikam.dimg: "/Daten/wirbeide/Bilder/AA-Ausstellung 2021 Bürgerzentrum/Flyer-Plakat/Plakat-Fotografische_Sichtweisen.png" : PNG file identified
KMemoryInfo: Platform identified : "LINUX"
KMemoryInfo: AvailableRam: 167751680 (cache: 12092628992 )
KMemoryInfo: AvailableSwap: 9436393472
Speicherzugriffsfehler (Speicherabzug geschrieben)$ inkscape (inkscape:22533): Gtk-WARNING **: 09:23:51.108: Im Modulpfad »adwaita« konnte keine Themen-Engine gefunden werden, (inkscape:22533): Gtk-WARNING **: 09:23:51.113: Im Modulpfad »adwaita« konnte keine Themen-Engine gefunden werden, grep -P '^[ \t]*[^#[ \t]+' /etc/apt/sources.list /etc/apt/sources.list.d/*.list /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic main restricted /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates main restricted /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic universe /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates universe /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic multiverse /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-updates multiverse /etc/apt/sources.list:deb http://de.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse /etc/apt/sources.list:deb http://archive.canonical.com/ubuntu/ bionic partner /etc/apt/sources.list:deb http://security.ubuntu.com/ubuntu/ bionic-security main restricted /etc/apt/sources.list:deb http://security.ubuntu.com/ubuntu/ bionic-security universe /etc/apt/sources.list:deb http://security.ubuntu.com/ubuntu/ bionic-security multiverse /etc/apt/sources.list.d/graphics:darktable:stable.list:deb http://download.opensuse.org/repositories/graphics:/darktable:/stable/xUbuntu_18.04/ / /etc/apt/sources.list.d/otto-kesselgulasch-ubuntu-gimp-bionic.list:deb http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu bionic main Danke euch Rainer |
||||
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: Zähle... |
|||||
|
Anmeldungsdatum: Beiträge: 8018 |
Moin Moin, Digikam hat ein Problem mit der Datenbank. So wie ich es sehe, findet es Einträge nicht und geht in eine Schleife. Beginn des Problems ⇒ Auszug: digikam.facedb: Face database: cannot process schema initialization digikam.facesengine: Failed to initialize face database ............... ................ digikam.database: Broken history: Same file referred by different entries. Refusing to add a loop. Allerdings sage ich es gleich, hier kann ich nicht helfen. Inkscape kann ich nicht testen, da bei mir nicht vorhanden. Gruß |
||||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 117 |
Hallo, ich Danke euch, aber ich habe mich entschieden, so wie es von.wert vorgeschlagen hat, die Aktuelle LTS-Version zu installieren. Das macht am meisten Sinn. Grüße Rainer |
||||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 117 |
Jetzt melde ich mich doch noch mal. Habe gestern Morgen noch sudo apt-get remove eingegeben und seitdem keine Abstürze mehr. Es wurden einige alte Kernel gelöscht. Neues Betriebssystem kommt trotzdem drauf |
||||
|
Anmeldungsdatum: Beiträge: 7756 |
remove und was?
oder, wenn Du dann mal auf apt gehst,
Löst vielleicht schon Dein Platzproblem. |
||||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 117 |
In diesem Thema geht es um meinen Desktop-Computer. und da läuft ja jetzt erst mal alles. Und hoffentlich auch noch wenn 20.04 rennt 😛 sudo apt-get purge autoremove hab ich auf dem Desktop und Laptop, nach ich ja schon Tags zuvor, sudo apt-get remove versucht habe, und der Desktop zumindest seit dem seine Arbeit verrichtet und lsof | grep deleted keine ewig lange Ausgabe nach sich zieht wie im neuen Thema Platzproblem [sudo] Passwort für laptop: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig E: Paket autoremove kann nicht gefunden werden. laptop@laptop ~ $ sudo apt autoremove Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 18 nicht aktualisiert. laptop@laptop ~ $ sudo apt clean laptop@laptop ~ $ |
||||
|
Anmeldungsdatum: Beiträge: 8018 |
Moin Moin, [sudo] Passwort für laptop: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig E: Paket autoremove kann nicht gefunden werden. laptop@laptop ~ $ sudo apt autoremove Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 18 nicht aktualisiert. laptop@laptop ~ $ sudo apt clean laptop@laptop ~ $ Hier hat von.wert sich geirrt. Der Befehl für das Terminal lautet sudo apt-get autoremove --purge && sudo apt-get clean Lass den bitte einmal durchlaufen und poste die Ausgabe im Codeblock. Gruß |
||||
|
Anmeldungsdatum: Beiträge: 7756 |
