Ganz ehrlich –- ich bin am Ende mit meinem Latein 😢
HP Laser Jet 1320 druckt nicht
Anmeldungsdatum: Beiträge: 19527 |
|
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
Der pcl3 hpijs geht wieder überhaupt nicht, und der oberste von den Postscript (recommended) bringt immerhin die Testseite ... sonst alles beim alten. Wo könnte denn die Schraube sein, wo man die Gruppenberechtigung von
Jau, Zeit ins Bettchen zu hüpfen ... 😇 |
|
Anmeldungsdatum: Beiträge: 19527 |
|
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
$ id uid=1000(ich) gid=1000(ich) Gruppen=1000(ich),4(adm),7(lp),20(dialout),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),126(sambashare) |
|
Anmeldungsdatum: Beiträge: 19527 |
Nun zeige mal grep printer /lib/udev/rules.d/*
grep saned /lib/udev/rules.d/*
grep sane /lib/udev/rules.d/* |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
$ grep printer /lib/udev/rules.d/*
/lib/udev/rules.d/50-udev-default.rules:SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
/lib/udev/rules.d/56-hpmud.rules:# This rule will check the smart install feature, plugin status and firmware download for the required printers.
/lib/udev/rules.d/56-hpmud.rules:ENV{hp_test}=="yes", PROGRAM="/bin/sh -c 'logger -p user.info loading HP Device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/nohup /usr/bin/hp-config_usb_printer $env{BUSNUM}:$env{DEVNUM}'"
/lib/udev/rules.d/69-cd-sensors.rules:ATTRS{idVendor}=="0765", ATTRS{idProduct}=="d020", ENV{COLORD_SENSOR_KIND}="dtp20", ENV{COLORD_SENSOR_CAPS}="printer spot"
/lib/udev/rules.d/69-cd-sensors.rules:ATTRS{idVendor}=="0971", ATTRS{idProduct}=="2000", ENV{COLORD_SENSOR_KIND}="i1-pro", ENV{COLORD_SENSOR_CAPS}="lcd crt projector printer ambient"
/lib/udev/rules.d/69-cd-sensors.rules:ATTRS{idVendor}=="0971", ATTRS{idProduct}=="2007", ENV{COLORD_SENSOR_KIND}="color-munki-photo", ENV{COLORD_SENSOR_CAPS}="lcd crt projector printer spot ambient"
/lib/udev/rules.d/69-cd-sensors.rules:ATTRS{idVendor}=="2457", ATTRS{idProduct}=="4200", ENV{COLORD_SENSOR_KIND}="spark", ENV{COLORD_SENSOR_CAPS}="lcd crt projector printer spot ambient"
/lib/udev/rules.d/70-printers.rules:ACTION=="add", SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}="configure-printer@usb-$env{BUSNUM}-$env{DEVNUM}.service"
/lib/udev/rules.d/70-printers.rules:ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_USB_INTERFACES}=="*:0701*:*", RUN+="udev-configure-printer remove %p"
/lib/udev/rules.d/70-uaccess.rules:# 3D printers, CNC machines, laser cutters, 3D scanners, etc.
/lib/udev/rules.d/99-systemd.rules:SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
/lib/udev/rules.d/99-systemd.rules:SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
/lib/udev/rules.d/99-systemd.rules:SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
$ grep saned /lib/udev/rules.d/*
/lib/udev/rules.d/99-saned.rules:# $Id: 99-saned.rules 218 2016-02-19 18:48:21Z wimalopaan $
/lib/udev/rules.d/99-saned.rules:# change group to saned for sane devices
/lib/udev/rules.d/99-saned.rules:# needed for saned to get scanner access
/lib/udev/rules.d/99-saned.rules:ENV{libsane_matched}=="yes", GROUP="saned"
$ grep sane /lib/udev/rules.d/*
/lib/udev/rules.d/56-hpmud.rules:ATTR{idVendor}=="03f0", ENV{ID_USB_INTERFACES}=="*:0701??:*|*:ffcc00:", OWNER="root", GROUP="lp", MODE="0664", ENV{libsane_matched}="yes", ENV{hp_test}="yes", ENV{ID_HPLIP}="1"
/lib/udev/rules.d/60-libsane1.rules:# For the list of supported USB devices see /usr/lib/udev/hwdb.d/20-sane.hwdb
/lib/udev/rules.d/60-libsane1.rules:# If the scanner is supported by sane-backends, please mail the entry to
/lib/udev/rules.d/60-libsane1.rules:# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
/lib/udev/rules.d/60-libsane1.rules:ACTION!="add", GOTO="libsane_rules_end"
/lib/udev/rules.d/60-libsane1.rules:ENV{DEVTYPE}=="usb_device", ENV{libsane_matched}=="yes", TEST=="power/control", ATTR{power/control}="on"
/lib/udev/rules.d/60-libsane1.rules:SUBSYSTEMS=="scsi", GOTO="libsane_scsi_rules_begin"
/lib/udev/rules.d/60-libsane1.rules:GOTO="libsane_rules_end"
/lib/udev/rules.d/60-libsane1.rules:LABEL="libsane_scsi_rules_begin"
/lib/udev/rules.d/60-libsane1.rules:KERNEL!="sg[0-9]*", GOTO="libsane_rules_end"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="6", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="SCANNER*", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="Expression800", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="GT-9700", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="GT-9800", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="GT-X900", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="Perfection1200", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="EPSON", ATTRS{model}=="Perfection636", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C1130A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C1750A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C1790A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C2500A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C2520A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C5110A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C6270A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C7670A", ENV{libsane_matched}="yes"
/lib/udev/rules.d/60-libsane1.rules:LABEL="libsane_rules_end"
/lib/udev/rules.d/69-libmtp.rules:ENV{ID_MTP_DEVICE}!="1", ENV{MTP_NO_PROBE}!="1", ENV{COLOR_MEASUREMENT_DEVICE}!="1", ENV{libsane_matched}!="yes", ATTR{bDeviceClass}=="00|02|06|ef|ff", PROGRAM="mtp-probe /sys$env{DEVPATH} $attr{busnum} $attr{devnum}", RESULT=="1", SYMLINK+="libmtp-%k", MODE="660", GROUP="audio", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
/lib/udev/rules.d/70-uaccess.rules:ENV{libsane_matched}=="yes", TAG+="uaccess"
/lib/udev/rules.d/99-saned.rules:# $Id: 99-saned.rules 218 2016-02-19 18:48:21Z wimalopaan $
/lib/udev/rules.d/99-saned.rules:# change group to saned for sane devices
/lib/udev/rules.d/99-saned.rules:# needed for saned to get scanner access
/lib/udev/rules.d/99-saned.rules:ENV{libsane_matched}=="yes", GROUP="saned"
|
|
Anmeldungsdatum: Beiträge: 19527 |
Hmm,die rules habe ich auf keinen Rechner,zeige sie mal cat /lib/udev/rules.d/99-saned.rules |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
$ cat /lib/udev/rules.d/99-saned.rules
# $Id: 99-saned.rules 218 2016-02-19 18:48:21Z wimalopaan $
#
# scanbd - KMUX scanner button daemon
#
# Copyright (C) 2008 - 2016 Wilhelm Meier (wilhelm.meier@fh-kl.de)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# change group to saned for sane devices
# needed for saned to get scanner access
ENV{libsane_matched}=="yes", GROUP="saned"
|
|
Anmeldungsdatum: Beiträge: 19527 |
Hab ich schon erwähnt das ich mit meinem Latein ..... ☺ Mal versuchsweise umbenennen sudo mv /lib/udev/rules.d/99-saned.rules /lib/udev/rules.d/99-saned.rules.bak Neustart.Drucker noch nicht einschalten.Terminal udevadm monitor --udev Dann den HP einschalten. Zeige auch noch ls -la /dev/bus/usb/* |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
Vielleicht hilft das ja weiter. Um meinen Epson-Scanner an's Laufen zu kriegen, hatte ich folgende Anleitung ausgeführt: https://help.ubuntu.com/community/sane_Troubleshooting#Epson |
|
Anmeldungsdatum: Beiträge: 19527 |
Nein,das hilft nicht weiter.Sollte keinen Einfluss auf den HP haben.HP hat sogar ein eigenes "Nutzer Konto" grep hplip /var/lib/dpkg/statoverride
udevadm monitor --udev
ls -la /dev/bus/usb/* |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
$ udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing ######### Hier habe ich den Drucker eingeschaltet ########## UDEV [259.076238] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0001/input/input7/mouse0 (input) UDEV [259.086386] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0001/input/input7/event5 (input) UDEV [259.114273] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0001/hidraw/hidraw0 (hidraw) UDEV [259.117881] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0001/input/input7 (input) UDEV [259.120718] unbind /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0001 (hid) UDEV [259.122477] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0001 (hid) UDEV [259.123793] unbind /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0 (usb) UDEV [259.125821] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0 (usb) UDEV [259.673711] unbind /devices/pci0000:00/0000:00:1d.0/usb6/6-2 (usb) UDEV [259.684931] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-2 (usb) UDEV [259.696861] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2 (usb) UDEV [259.709687] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0 (usb) UDEV [259.712558] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0002 (hid) UDEV [259.715610] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0002/input/input15 (input) UDEV [259.717241] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0002/hidraw/hidraw0 (hidraw) UDEV [259.720928] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0002/input/input15/mouse0 (input) UDEV [259.763176] add /devices/parport0/ppdev0.0 (parport) UDEV [259.764144] bind /devices/parport0/ppdev0.0 (parport) UDEV [259.764940] unbind /devices/parport0/ppdev0.0 (parport) UDEV [259.769679] remove /devices/parport0/ppdev0.0 (parport) UDEV [259.789399] add /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0002/input/input15/event5 (input) UDEV [259.793629] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C06D.0002 (hid) UDEV [259.797994] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0 (usb) UDEV [259.801537] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-2 (usb) UDEV [260.604992] add /devices/pci0000:00/0000:00:1d.0/usb6/6-1 (usb) UDEV [260.630034] add /module/usblp (module) UDEV [260.632469] add /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 (usb) UDEV [260.635749] add /class/usbmisc (class) UDEV [260.648067] add /bus/usb/drivers/usblp (drivers) UDEV [260.651546] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-1 (usb) UDEV [260.656610] add /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/usbmisc/lp0 (usbmisc) UDEV [260.663387] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 (usb) UDEV [264.306250] add /devices/parport0/ppdev0.0 (parport) UDEV [264.307154] bind /devices/parport0/ppdev0.0 (parport) UDEV [264.350212] unbind /devices/parport0/ppdev0.0 (parport) UDEV [264.351626] remove /devices/parport0/ppdev0.0 (parport) UDEV [265.819845] add /devices/parport0/ppdev0.0 (parport) UDEV [265.820827] bind /devices/parport0/ppdev0.0 (parport) UDEV [265.870719] unbind /devices/parport0/ppdev0.0 (parport) UDEV [265.871593] remove /devices/parport0/ppdev0.0 (parport) UDEV [265.902226] remove /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/usbmisc/lp0 (usbmisc) UDEV [265.905523] remove /usbmisc (class) UDEV [265.918759] unbind /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 (usb) UDEV [265.921918] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 (usb) UDEV [265.928981] unbind /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 (usb) UDEV [265.932519] add /class/usbmisc (class) UDEV [265.934351] add /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/usbmisc/lp0 (usbmisc) UDEV [265.943259] bind /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 (usb) UDEV [266.097022] add /devices/parport0/ppdev0.0 (parport) UDEV [266.097709] bind /devices/parport0/ppdev0.0 (parport) UDEV [266.146661] unbind /devices/parport0/ppdev0.0 (parport) UDEV [266.148147] remove /devices/parport0/ppdev0.0 (parport)
$ ls -la /dev/bus/usb/* /dev/bus/usb/001: insgesamt 0 drwxr-xr-x 2 root root 120 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 0 Okt 26 12:19 001 crw-rw-r-- 1 root root 189, 1 Okt 26 12:19 002 crw-rw-r-- 1 root root 189, 2 Okt 26 12:19 003 crw-rw-r-- 1 root root 189, 3 Okt 26 12:19 004 /dev/bus/usb/002: insgesamt 0 drwxr-xr-x 2 root root 60 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 128 Okt 26 12:19 001 /dev/bus/usb/003: insgesamt 0 drwxr-xr-x 2 root root 60 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 256 Okt 26 12:19 001 /dev/bus/usb/004: insgesamt 0 drwxr-xr-x 2 root root 60 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 384 Okt 26 12:19 001 /dev/bus/usb/005: insgesamt 0 drwxr-xr-x 2 root root 60 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 512 Okt 26 12:19 001 /dev/bus/usb/006: insgesamt 0 drwxr-xr-x 2 root root 100 Okt 26 12:23 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 640 Okt 26 12:19 001 crw-rw-r-- 1 root root 189, 642 Okt 26 12:23 003 crw-rw-r--+ 1 root lp 189, 643 Okt 26 12:23 004 /dev/bus/usb/007: insgesamt 0 drwxr-xr-x 2 root root 60 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 768 Okt 26 12:19 001 /dev/bus/usb/008: insgesamt 0 drwxr-xr-x 2 root root 60 Okt 26 12:18 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 896 Okt 26 12:19 001
$ grep hplip /var/lib/dpkg/statoverride hplip root 755 /var/run/hplip |
|
Anmeldungsdatum: Beiträge: 19527 |
Hmmm /dev/bus/usb/006: insgesamt 0 drwxr-xr-x 2 root root 100 Okt 26 12:23 . drwxr-xr-x 10 root root 200 Okt 26 12:18 .. crw-rw-r-- 1 root root 189, 640 Okt 26 12:19 001 crw-rw-r-- 1 root root 189, 642 Okt 26 12:23 003 crw-rw-r--+ 1 root lp 189, 643 Okt 26 12:23 004 zeige mal udevadm info -a -n /dev/bus/usb/006/004 |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
Es zeigt sich nun eine Veränderung (siehe Markierung weit unten): $ sudo hp-check -r
[sudo] Passwort für ich:
Saving output in log file: /home/ich/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux
Host: T500
Proc: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.4.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -----------------------
hp:/usb/hp_LaserJet_1320_series? HP LaserJet 1320 series
serial=00CNHW55TGZ5
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Canon-MX880-3.50-1_FRITZ!Box
----------------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/Canon-MX880-3.50-1_FRITZ!Box.ppd
PPD Description: Canon MX880 series Ver.3.50
Printer status: Drucker Canon-MX880-3.50-1_FRITZ!Box ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:08:10 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Canon-MX880-3.50-1_USB
----------------------
Type: Unknown
Device URI: cnijusb:/dev/usb/lp0
PPD: /etc/cups/ppd/Canon-MX880-3.50-1_USB.ppd
PPD Description: Canon MX880 series Ver.3.50
Printer status: Drucker Canon-MX880-3.50-1_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:00:16 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Canon-MX880-3.90_FRITZ!Box
--------------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/Canon-MX880-3.90_FRITZ!Box.ppd
PPD Description: Canon MX880 series Ver.3.90
Printer status: Drucker Canon-MX880-3.90_FRITZ!Box ist im Leerlauf. Aktiviert seit Do 08 Nov 2018 14:55:34 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Canon-MX880-3.90_USB
--------------------
Type: Unknown
Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1
PPD: /etc/cups/ppd/Canon-MX880-3.90_USB.ppd
PPD Description: Canon MX880 series Ver.3.90
Printer status: Drucker Canon-MX880-3.90_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 02:49:32 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Epson-WF-2630_USB
-----------------
Type: Unknown
Device URI: usb://EPSON/WF-2630%20Series?serial=554D43593237333652&interface=1
PPD: /etc/cups/ppd/Epson-WF-2630_USB.ppd
PPD Description: Epson WF-2530 Series - epson-inkjet-printer-escpr 1.6.33-1lsb3.2 (Seiko Epson Corporation LSB 3.2)
Printer status: Drucker Epson-WF-2630_USB ist im Leerlauf. Aktiviert seit Do 13 Jun 2019 23:44:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
HP-LaserJet-1320_pxlmono
------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%201320%20series?serial=00CNHW55TGZ5
PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd
PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended)
Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf. Aktiviert seit Sa 26 Okt 2019 11:49:38 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
MX880-series_FRITZ!Box
----------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/MX880-series_FRITZ!Box.ppd
PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13
Printer status: Drucker MX880-series_FRITZ!Box ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:10:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
MX880-series_USB
----------------
Type: Unknown
Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1
PPD: /etc/cups/ppd/MX880-series_USB.ppd
PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13
Printer status: Drucker MX880-series_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 02:06:02 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/006/004' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 12
Total Warnings: 8
Done.Der Monitor ergänzte dazu: UDEV [690.023748] add /devices/parport0/ppdev0.0 (parport) UDEV [690.026299] bind /devices/parport0/ppdev0.0 (parport) UDEV [690.029922] unbind /devices/parport0/ppdev0.0 (parport) UDEV [690.032784] remove /devices/parport0/ppdev0.0 (parport) UDEV [700.014750] add /devices/parport0/ppdev0.0 (parport) UDEV [700.016147] bind /devices/parport0/ppdev0.0 (parport) UDEV [700.063138] unbind /devices/parport0/ppdev0.0 (parport) UDEV [700.064894] remove /devices/parport0/ppdev0.0 (parport) |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 2726 |
$ udevadm info -a -n /dev/bus/usb/006/004
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:1d.0/usb6/6-1':
KERNEL=="6-1"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{authorized}=="1"
ATTR{avoid_reset_quirk}=="0"
ATTR{bConfigurationValue}=="1"
ATTR{bDeviceClass}=="00"
ATTR{bDeviceProtocol}=="00"
ATTR{bDeviceSubClass}=="00"
ATTR{bMaxPacketSize0}=="8"
ATTR{bMaxPower}=="2mA"
ATTR{bNumConfigurations}=="1"
ATTR{bNumInterfaces}==" 1"
ATTR{bcdDevice}=="0100"
ATTR{bmAttributes}=="c0"
ATTR{busnum}=="6"
ATTR{configuration}==""
ATTR{devnum}=="4"
ATTR{devpath}=="1"
ATTR{idProduct}=="1d17"
ATTR{idVendor}=="03f0"
ATTR{ltm_capable}=="no"
ATTR{manufacturer}=="Hewlett-Packard"
ATTR{maxchild}=="0"
ATTR{product}=="hp LaserJet 1320 series"
ATTR{quirks}=="0x0"
ATTR{removable}=="removable"
ATTR{serial}=="00CNHW55TGZ5"
ATTR{speed}=="12"
ATTR{urbnum}=="50"
ATTR{version}==" 1.10"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb6':
KERNELS=="usb6"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{authorized}=="1"
ATTRS{authorized_default}=="1"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{bConfigurationValue}=="1"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{bMaxPower}=="0mA"
ATTRS{bNumConfigurations}=="1"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bcdDevice}=="0415"
ATTRS{bmAttributes}=="e0"
ATTRS{busnum}=="6"
ATTRS{configuration}==""
ATTRS{devnum}=="1"
ATTRS{devpath}=="0"
ATTRS{idProduct}=="0001"
ATTRS{idVendor}=="1d6b"
ATTRS{interface_authorized_default}=="1"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Linux 4.15.0-66-generic uhci_hcd"
ATTRS{maxchild}=="2"
ATTRS{product}=="UHCI Host Controller"
ATTRS{quirks}=="0x0"
ATTRS{removable}=="unknown"
ATTRS{serial}=="0000:00:1d.0"
ATTRS{speed}=="12"
ATTRS{urbnum}=="123"
ATTRS{version}==" 1.10"
looking at parent device '/devices/pci0000:00/0000:00:1d.0':
KERNELS=="0000:00:1d.0"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x0c0300"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{d3cold_allowed}=="0"
ATTRS{device}=="0x2934"
ATTRS{dma_mask_bits}=="32"
ATTRS{driver_override}=="(null)"
ATTRS{enable}=="1"
ATTRS{irq}=="16"
ATTRS{local_cpulist}=="0-1"
ATTRS{local_cpus}=="3"
ATTRS{msi_bus}=="1"
ATTRS{numa_node}=="-1"
ATTRS{revision}=="0x03"
ATTRS{subsystem_device}=="0x20f0"
ATTRS{subsystem_vendor}=="0x17aa"
ATTRS{vendor}=="0x8086"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
|