staging.inyokaproject.org

ATI VEGA 56 Displayport nur 640X460 Auflösung

Status: Ungelöst | Ubuntu-Version: Ubuntu 18.04 (Bionic Beaver)
Antworten |

pepexx28

Anmeldungsdatum:
23. Januar 2012

Beiträge: Zähle...

Hallo

habe seit einigen Tagen nun Ubuntu installiert mit meiner neune GraKA Vega 56.

Bekomme nur eine Auflösung von 640X480 via Displayport.

Monitor wird ebenfalls nicht erkannt als 28"Acer.

Via HDMI ist alles kein Problem kann jede nur denkbare Auflösung einstellen.

Nun habe ich festgestellt das ich mit dem alten Kernel kein Problem habe, alles Funktioniert bestens.

"$ uname -r
4.15.0-65-generic"

Benutze ich ein Kernel der Neuer ist, auch Version 5.XXX ist das Problem wieder da.

hier mal ein Auszug von xrandr

xrandr --prop
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384
DisplayPort-0 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 621mm x 341mm
	EDID: 
		00ffffffffffff0004720704ffffffff
		ff170104a53e227806ee91a3544c9926
		0f505400000001010101010101010101
		0101010101014dd000a0f0703e803020
		35006d552100001a000000ff00234153
		4e4a64365942384c4464000000fd001e
		461e8c36010a202020202020000000fc
		0041636572205842323830484b0a0126
		02030a01654b04000101ef5100a0f070
		1980302035006d552100001a00000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		000000000000000000000000000000df
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
   3840x2160     60.00*+  24.00  
   1920x1200     60.00  
   1920x1080     60.00  
   1600x1200     60.00  
   1680x1050     60.00  
   1280x1024     60.00  
   1440x900      60.00  
   1280x800      60.00  
   1280x720      60.00  
   1024x768      60.00  
   800x600       60.00  
   640x480       60.00  
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
HDMI-A-1 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
DVI-D-0 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad

Hat jemand das sellbe Problem ??

CPU:Ryzen 2700X

Board:Asus AM4 B450

GRAKA: AMD/ATI VEGA56 8GB

Letalis_Sonus Team-Icon

Anmeldungsdatum:
13. April 2008

Beiträge: 12990

Es wäre schon sinnvoll die xrandr Ausgabe dann zu organiseren, wenn es gerade nicht läuft wie gewünscht.

Wie sieht's mit Logs aus?

pepexx28

(Themenstarter)

Anmeldungsdatum:
23. Januar 2012

Beiträge: 5

pepexx28 schrieb:

Hallo

habe seit einigen Tagen nun Ubuntu installiert mit meiner neune GraKA Vega 56.

Bekomme nur eine Auflösung von 640X480 via Displayport.

Monitor wird ebenfalls nicht erkannt als 28"Acer.

Via HDMI ist alles kein Problem kann jede nur denkbare Auflösung einstellen.

Nun habe ich festgestellt das ich mit dem alten Kernel kein Problem habe, alles Funktioniert bestens.

"$ uname -r
4.15.0-65-generic"

Benutze ich ein Kernel der Neuer ist, auch Version 5.XXX ist das Problem wieder da.

hier mal ein Auszug von xrandr

xrandr --prop
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384
DisplayPort-0 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 621mm x 341mm
	EDID: 
		00ffffffffffff0004720704ffffffff
		ff170104a53e227806ee91a3544c9926
		0f505400000001010101010101010101
		0101010101014dd000a0f0703e803020
		35006d552100001a000000ff00234153
		4e4a64365942384c4464000000fd001e
		461e8c36010a202020202020000000fc
		0041636572205842323830484b0a0126
		02030a01654b04000101ef5100a0f070
		1980302035006d552100001a00000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		000000000000000000000000000000df
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
   3840x2160     60.00*+  24.00  
   1920x1200     60.00  
   1920x1080     60.00  
   1600x1200     60.00  
   1680x1050     60.00  
   1280x1024     60.00  
   1440x900      60.00  
   1280x800      60.00  
   1280x720      60.00  
   1024x768      60.00  
   800x600       60.00  
   640x480       60.00  
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
HDMI-A-1 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad
DVI-D-0 disconnected (normal left inverted right x axis y axis)
	TearFree: auto 
		supported: off, on, auto
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	non-desktop: 0 
		range: (0, 1)
	link-status: Good 
		supported: Good, Bad

Hat jemand das sellbe Problem ??

hier nun die defekte Version von xrandr

sudo xrandr --prop
Screen 0: minimum 320 x 200, current 640 x 480, maximum 16384 x 16384
DisplayPort-0 connected primary 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
	GAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	DEGAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	GAMMA_LUT: 0 
		range: (0, 65535)
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	DEGAMMA_LUT: 0 
		range: (0, 65535)
	TearFree: auto 
		supported: off, on, auto
	vrr_capable: 0 
		range: (0, 1)
	max bpc: 8 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 59 
		supported: 59
	non-desktop: 0 
		range: (0, 1)
   640x480       59.94* 
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
	GAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	DEGAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	GAMMA_LUT: 0 
		range: (0, 65535)
	CTM: 0 
	DEGAMMA_LUT: 0 
		range: (0, 65535)
	TearFree: auto 
		supported: off, on, auto
	vrr_capable: 0 
		range: (0, 1)
	max bpc: 8 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 62 
		supported: 62
	non-desktop: 0 
		range: (0, 1)
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
	GAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	DEGAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	GAMMA_LUT: 0 
		range: (0, 65535)
	CTM: 0 
	DEGAMMA_LUT: 0 
		range: (0, 65535)
	TearFree: auto 
		supported: off, on, auto
	vrr_capable: 0 
		range: (0, 1)
	max bpc: 8 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 65 
		supported: 65
	non-desktop: 0 
		range: (0, 1)
HDMI-A-1 disconnected (normal left inverted right x axis y axis)
	GAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	DEGAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	GAMMA_LUT: 0 
		range: (0, 65535)
	CTM: 0 
	DEGAMMA_LUT: 0 
		range: (0, 65535)
	TearFree: auto 
		supported: off, on, auto
	vrr_capable: 0 
		range: (0, 1)
	max bpc: 8 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 68 
		supported: 68
	non-desktop: 0 
		range: (0, 1)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
	GAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	DEGAMMA_LUT_SIZE: 4096 
		range: (0, -1)
	GAMMA_LUT: 0 
		range: (0, 65535)
	CTM: 0 
	DEGAMMA_LUT: 0 
		range: (0, 65535)
	TearFree: auto 
		supported: off, on, auto
	max bpc: 8 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 71 
		supported: 71
	non-desktop: 0 
		range: (0, 1)

hier der Kernel mit dem das passiert ☹

"$ uname -r
5.0.0-13-generic"

CPU:Ryzen 2700X

Board:Asus AM4 B450

GRAKA: AMD/ATI VEGA56 8GB

Antworten |