staging.inyokaproject.org

TP-Link AC600 Archer T2U

Status: Gelöst | Ubuntu-Version: Ubuntu 18.04 (Bionic Beaver)
Antworten |

Salidar

Anmeldungsdatum:
18. Mai 2019

Beiträge: Zähle...

Hallo zusammen,

ich habe folgendes Gerät und würde das gerne zum laufen bringen.

Der Treiber existiert in 2 Versionen.

V1: Download und entpacken geht aber nicht kompilieren. V2: Da geht schon entpacken nicht.

Ausgabe lspci:


christian@minimax:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)

Ausgabe lscpu:


Architektur:                   x86_64
CPU Operationsmodus:           32-bit, 64-bit
Byte-Reihenfolge:              Little Endian
CPU(s):                        8
Liste der Online-CPU(s):       0-7
Thread(s) pro Kern:            2
Kern(e) pro Socket:            4
Sockel:                        1
NUMA-Knoten:                   1
Anbieterkennung:               GenuineIntel
Prozessorfamilie:              6
Modell:                        42
Modellname:                    Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
Stepping:                      7
CPU MHz:                       1647.995
Maximale Taktfrequenz der CPU: 3800,0000
Minimale Taktfrequenz der CPU: 1600,0000
BogoMIPS:                      7004.34
Virtualisierung:               VT-x
L1d Cache:                     32K
L1i Cache:                     32K
L2 Cache:                      256K
L3 Cache:                      8192K
NUMA-Knoten0 CPU(s):           0-7
Markierungen:                  fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts md_clear flush_l1d

sudo make schlägt mit dem Fehler: Error 2 fehl.

Bearbeitet von kB:

Formatierung ergänzt. Bitte verwende zur Verbesserung der Lesbarkeit Codeblöcke als Formatierung von Befehlen und deren Ausgaben sowie für Textdateien! Danke.

Salidar

(Themenstarter)

Anmeldungsdatum:
18. Mai 2019

Beiträge: 25

christian@minimax:~/mt7610u_wifi_sta_v3002_dpo_20130916$ make
make -C tools
make[1]: Verzeichnis „/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/tools“ wird betreten
gcc -g bin2h.c -o bin2h
make[1]: Verzeichnis „/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/tools“ wird verlassen
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/tools/bin2h
chipset = mt7610u
cp -f os/linux/Makefile.6 /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/Makefile
make -C /lib/modules/4.18.0-20-generic/build SUBDIRS=/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux modules
make[1]: Verzeichnis „/usr/src/linux-headers-4.18.0-20-generic“ wird betreten
  CC [M]  /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.o
In file included from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_os.h:44:0,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_comm.h:75,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rt_config.h:33,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:28:
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/os/rt_linux.h:77:0: warning: "EXT_BUILD_CHANNEL_LIST" redefined
 #define EXT_BUILD_CHANNEL_LIST  /* must define with CRDA */
 
<command-line>:0:0: note: this is the location of the previous definition
In file included from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/os/rt_linux.h:98:0,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_os.h:44,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_comm.h:75,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rt_config.h:33,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:28:
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/cfg80211.h:35:49: error: ‘IEEE80211_NUM_BANDS’ undeclared here (not in a function); did you mean ‘IEEE80211_NUM_ACS’?
  struct ieee80211_supported_band Cfg80211_bands[IEEE80211_NUM_BANDS];
                                                 ^~~~~~~~~~~~~~~~~~~
                                                 IEEE80211_NUM_ACS
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c: In function ‘announce_802_3_packet’:
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:341:16: warning: unused variable ‘pAd’ [-Wunused-variable]
  RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pAdSrc;
                ^~~
In file included from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_os.h:44:0,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rtmp_comm.h:75,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/rt_config.h:33,
                 from /home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:28:
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c: In function ‘STA_MonPktSend’:
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:450:35: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
         DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
                                   ^                                               ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/include/os/rt_linux.h:669:16: note: in definition of macro ‘DBGPRINT_RAW’
         printk Fmt;               \
                ^~~
/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.c:450:9: note: in expansion of macro ‘DBGPRINT’
         DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
         ^~~~~~~~
scripts/Makefile.build:323: recipe for target '/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.o' failed
make[2]: *** [/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/../../os/linux/rt_profile.o] Error 1
Makefile:1534: recipe for target '_module_/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux' failed
make[1]: *** [_module_/home/christian/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux] Error 2
make[1]: Verzeichnis „/usr/src/linux-headers-4.18.0-20-generic“ wird verlassen
Makefile:403: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2

Bearbeitet von kB:

Formatierung ergänzt. Bitte verwende zur Verbesserung der Lesbarkeit Codeblöcke als Formatierung von Befehlen und deren Ausgaben sowie für Textdateien! Danke.

DJKUhpisse Team-Icon

Supporter, Wikiteam
Avatar von DJKUhpisse

Anmeldungsdatum:
18. Oktober 2016

Beiträge: 16818

Installationsanleitung für 18.04

Ausgabe lspci:

Bus 003 Device 004: ID 148f:761a Ralink Technology, Corp.

Ist der TP-LINK AC600 (Archer T2U) MediaTek MT7610U.

sudo apt install build-essential linux-headers-generic
cd /tmp
wget https://github.com/chenhaiq/mt7610u_wifi_sta_v3002_dpo_20130916/archive/638d4f25c4014952bb723d98d85d99ba11ba93bd.zip
unzip mt7610u_wifi_sta_v3002_dpo_20130916-638d4f25c4014952bb723d98d85d99ba11ba93bd.zip
cd mt7610u_wifi_sta_v3002_dpo_20130916-638d4f25c4014952bb723d98d85d99ba11ba93bd
make
sudo make install

Originalanleitung: https://linux-thai.blogspot.com/2018/10/install-tp-link-ac600-archer-t2u-driver.html 🇬🇧

Salidar

(Themenstarter)

Anmeldungsdatum:
18. Mai 2019

Beiträge: 25

Vielen Vielen Dank.

Kann als gelöst markiert werden für den Stick:

https://www.tp-link.com/de/home-networking/adapter/archer-t2u/

Salidar

(Themenstarter)

Anmeldungsdatum:
18. Mai 2019

Beiträge: 25

https://www.myria.de/computer/1308-tp-link-archer-t2u-ac600-unter-linux-nutzen

Bearbeitet von praseodym:

Entsperrt. Bitte ansonsten keine Links ohne Meinung posten, siehe Portalregel.

Antworten |