Hallo
Ich kann lokal scannen mit:
lsusb Bus 001 Device 002: ID 04a9:190a Canon, Inc. CanoScan LiDE 210
scanimage -L device `genesys:libusb:001:002' is a Canon LiDE 210 flatbed scanner
Ich habe konform verschiedene ubuntu-Artikel Netzwerk-scanning eingerichtet.
Server:
dll.conf
net genesys
saned.conf
192.168.178.0/24
systemctl status sane*
● saned.socket - saned incoming socket
Loaded: loaded (/lib/systemd/system/saned.socket; enabled; vendor preset: enabled)
Active: active (listening) since Thu 2019-01-31 18:55:44 CET; 2h 12min ago
Listen: [::]:6566 (Stream)
Accepted: 1; Connected: 0
Tasks: 0 (limit: 4915)
CGroup: /system.slice/saned.socket
Jan 31 18:55:44 nickerie systemd[1]: Listening on saned incoming socket.Client: (ich habe per ssh auf alle Rechner Zugang)
scanimage -L No scanners were identified....
scanimage -L net genesys
(genesys hinzugefügt damit ich durch USB umstöpseln auch da scnannen kann:)
net.conf
connect_timeout = 20 nickerie
Now, when I telnet to the scanner server
telnet nickerie 6566 Trying 192.168.178.5... Connected to nickerie.fritz.box. Escape character is '^]'
I see this on the server
root@nickerie:~# systemctl status sane*
● saned@3-192.168.178.5:6566-192.168.178.21:42308.service - Scanner Service (192.168.178.21:42308)
Loaded: loaded (/lib/systemd/system/saned@.service; indirect; vendor preset: enabled)
Active: active (running) since Thu 2019-01-31 21:18:55 CET; 4min 16s ago
Main PID: 20707 (saned)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/system-saned.slice/saned@3-192.168.178.5:6566-192.168.178.21:42308.service
└─20707 /usr/sbin/saned
Jan 31 21:18:55 nickerie systemd[1]: Started Scanner Service (192.168.178.21:42308).
Jan 31 21:18:55 nickerie saned[20707]: saned (AF-indep+IPv6+systemd) from sane-backends 1.0.27 starting up
Jan 31 21:18:55 nickerie saned[20707]: check_host: access by remote host: ::ffff:192.168.178.21
● saned.socket - saned incoming socket
Loaded: loaded (/lib/systemd/system/saned.socket; enabled; vendor preset: enabled)
Active: active (listening) since Thu 2019-01-31 18:55:44 CET; 2h 27min ago
Listen: [::]:6566 (Stream)
Accepted: 4; Connected: 1
Tasks: 0 (limit: 4915)
CGroup: /system.slice/saned.socket
Jan 31 18:55:44 nickerie systemd[1]: Listening on saned incoming socket.
root@nickerie:~#
root@nickerie:~#
root@nickerie:~#
root@nickerie:~# systemctl status saned@3-192.168.178.5\:6566-192.168.178.21\:42308.service
● saned@3-192.168.178.5:6566-192.168.178.21:42308.service - Scanner Service (192.168.178.21:42308)
Loaded: loaded (/lib/systemd/system/saned@.service; indirect; vendor preset: enabled)
Active: active (running) since Thu 2019-01-31 21:18:55 CET; 4min 20s ago
Main PID: 20707 (saned)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/system-saned.slice/saned@3-192.168.178.5:6566-192.168.178.21:42308.service
└─20707 /usr/sbin/saned
Jan 31 21:18:55 nickerie systemd[1]: Started Scanner Service (192.168.178.21:42308).
Jan 31 21:18:55 nickerie saned[20707]: saned (AF-indep+IPv6+systemd) from sane-backends 1.0.27 starting up
Jan 31 21:18:55 nickerie saned[20707]: check_host: access by remote host: ::ffff:192.168.178.21
root@nickerie:~# Als Laie interpretiere ich dies, dass die Netzverbindung steht, aber der Scanner nicht startet.
Weiß jemand Abhilfe
Gruß Jack46
